}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 19398143

    • Construction, Building Material, Angle, Plate Supply, Sheet, Window Supply, Machinery and Tools, Hardware and Fasteners, Bolts, Nuts Supply, Cleaning Equipments, Absorbents, Chemical Oil and Gas, Paints and Primers, Paint Supply, Distribution and Conditio, As per document-Jammu And Kashmir

    Indian Army has published Construction, Building Material, Angle, Plate Supply, Sheet, Window Supply, Machinery and Tools, Hardware and Fasteners, Bolts, Nuts Supply, Cleaning Equipments, Absorbents, Chemical Oil and Gas, Paints and Primers, Paint Supply, Distribution and Conditio. Submission Date for this Tender is 22-02-2019. Angle Tenders in As per document Jammu And Kashmir. Bidders can get complete Tender details and download the document.




    Tender Notice

    19398143
    Construction, Building Material, Angle, Plate Supply, Sheet, Window Supply, Machinery and Tools, Hardware and Fasteners, Bolts, Nuts Supply, Cleaning Equipments, Absorbents, Chemical Oil and Gas, Paints and Primers, Paint Supply, Distribution and Conditio
    Tender
    Indian
    Jammu And Kashmir
    As Per Document
    22-02-2019

    Tender Details

    Tender For Supply Of Op Work Stores:-33 Sun Shade Of 1800 Mm Wide With Fabricated Angle Iron Of 40X40x6mm Thick And 0.60 M Projected And Ms Sheet Of 2 Mm Thick Fixed On The Angle Iron And Coated With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer. 34 False Ceiling Made Of 40 Mm Thick Puf Insulated Panel With 0.63 Mm Thick Hot Dipped Galvanised Steel Sheet On Both Side Supported With Held Of Inverted Tee Sec 50X50x50 Mm Thick And L Sec Of 50X50x5mm Thick Fixed To Truss. 35 Fabricated Covered Entrance To The Door Of 40Mm Dia Ms Pipe And Covered With Cgi Sheets 0.63Mm Thick And 6 Mm Thick Ms Plate Welded To The Bottom Of The Pipe For Fixing Onto The Srt Along With Nuts And Bolts Of 12 Mm Dia And 40Mm Long. Structure To Be Painted With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer. 36 Fabricated Observation Window 37 Steel Loop Holes 39 Form Work -Type -2 :-Timber Form Work Material For Columns Of Size 0.3 X 0.3 X 0.9M And Columns Footing Of Size 0.9 X 0.9 X 0.3 M ( Type F-2 ) Made Out Of 30Mm Thick Hard Wood Planks / Boardings ( Wrought In One Side ) Incl Making 12Mm Dia Holes 41 Prefabricated Foundation Reinforcement Type F-2 Made Of 12 Mm & 10 Mm For Steel As Main Bars And 8 Mm Dia Deformed Bars As In Stirrups Us As Per Drawings Including Cutting Bending & Binding With Mild Steel Binding Wire Annealed Not Less Then 0.90 Mm Dia Complete 42 Steel Window 49 Supply Of Pre-Fabricated Steel Tubular Bathing Cubicle ( 2 / 1 ) Structure 52 Supply Of Pre-Fabricated Steel Tubular Ffl ( 2 / 1 ) Structure Of Size 4.20 X 3.60M. Height At Front And Rear Side 2.10M And 3.10M Gable Height ( Set Of Two Cubical Of Size 1.8M X1.8M Each ) Technical Specification Attached As Per Appx K & Sketch ‘P’ & Q.

    Key Value

    Document Fees
    Refer document
    EMD
    INR 702200.0 /-
    Tender Value
    Refer document
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail