}

Distribution and Conditioning, Air Circulation, Blowers, Impellers, Ventilation Dampers, Ducts, Duct Supply, Chemical Oil and Gas, Chemical Industry, Chemical Supply, Paints and Primers, Miscellaneous Finishes, Furniture, Furniture Items, Cabinet Supply, , IISER MOHALI-Punjab

Indian Institute Of Science Education And Research-IISER has published Distribution and Conditioning, Air Circulation, Blowers, Impellers, Ventilation Dampers, Ducts, Duct Supply, Chemical Oil and Gas, Chemical Industry, Chemical Supply, Paints and Primers, Miscellaneous Finishes, Furniture, Furniture Items, Cabinet Supply, . Submission Date for this Tender is 27-02-2019. Blowers Tenders in IISER MOHALI Punjab. Bidders can get complete Tender details and download the document.




Tender Notice

19164265
Distribution and Conditioning, Air Circulation, Blowers, Impellers, Ventilation Dampers, Ducts, Duct Supply, Chemical Oil and Gas, Chemical Industry, Chemical Supply, Paints and Primers, Miscellaneous Finishes, Furniture, Furniture Items, Cabinet Supply,
Open Tender
Indian
Punjab
IISER MOHALI
27-02-2019

Tender Details

Tender For Supply And Installation Laboratory Furniture In Teaching Laboratory Jino George -1167:-1.1 Wall Side Work Bench Of Size 1500Mm L X 750Mm W X 900Mm H Having Granite Top And One Shutter And Drawer . ( Wwb2a, As Per Drawing Enclosed ) - As Per Technical Specification Given Below 1.2 Fume Hood With Underneath Cupboards Should Also Connected To The Ventilation ( Ducted ) Through Fume Hood Exhaust. Must Be Supplied With 8Mm Wire Capable Of Handling 8 Kva Load With 15 Amp Plug Point Of Size 1830 Mm- As Per Technical Specification Given Below 1.3 Island Reagent Rack ( Irrl ) , 2400X600x675 1.4 Island Work Bench 1.5 Sitting Table Of Size 1500Mm L X 600Mm W X 750Mm H With One Lockable Drawer 75Mm Height, Having White Cedar Bawarian Birch Laminated Post Formed Top With Hardwood Lipping. ( Stt2 ) ( As Per Drawing Enclosed ) 1.6 Wall Chemical Cabinet ( Wcc ) , 2440X380x675 Mm 1.7 Ventilated Chemical Cupboard ( Vcc ) Of Size 1830X762x2440 Mm 1.8 Storage Unit 2 ( Su2 ) Having One Small And One Big Drawer. 1.9 Equipment Table With Electrical Trunking ( Eqt1 ) 2.0 Equipment Table With Electrical Trunking ( Eqt2 ) 2.1 Big Sink Unit Of Size 1500X900x900mm Made Up Of Ms Powder Coated Sheet With Granite Top ( Bsu, As Per Drawing Enclosed ) 2.2 Drying Shelves Above Wall Sinks 2.3 Scrubber For 2 Blowers 2.4 Blower 2.5 Wall Side Work Bench 2.7 Hanging Peg Rack 600X600mm 2.8 Glass Cabinet 950X600x2400 2.9 Frp Ducting Of Diameter 200 Mm 3 Supply Of Moulded Single Piece Impeller Having Overall Diameter Of Apx. 300 Mm And Height Of The Impellers Of Apx. 168 Mm Having 356 Nos Of Uniform Viens. The Impeller Shall Be Suitable For Shaft Of 2Hp As Well As 3 Hp Electric Motor Having Ranging From 1440 Rpm To 2600 Rpm. The Impeller Shall Be Supplied Duly Statically And Dynamically Balanced Including Packing Of The Same.

Key Value

Document Fees
Refer document
EMD
INR 80000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail