Mineral Textile Rubber and Lather, Base Metals, Alloy Supply, Zinc supply, Services, Space Planning and Designing, Architect Work, Construction, Building Material, Coil, Civil Construction, False Celing, Building Construction, Shed Construction, Machinery, hisar-Haryana

Tender for canopy repair under hro -canopy roof sheet opening, canopy roof sheet refixing, canopy false ceiling opening., canopy false ceiling refixing., providing and installing roofing ribbed roofing system manufactured with high strength steel grade of g550( 550mpa) of zincalume steel or approved equivalent bare galvalume high tensile cold rolled steel as per astm 117 a792m /as 1397 coating class azm 150 ( minimum 150 gm/sqm zinc-aluminium alloy coating mass total of both sides),of yield strength 550 mpa thickness of bare metal (bct): 0.40mm ,total coated thickness(tct) : 0.45 mm .approximate mass of roofing sheet shall be 4.17 kg/sqm. panels shall be of min. 900 mm wide and min. corrugation depth of 38 mm with varying lengths as per site requirements rate shall be including laying of sheets with approved fasteners and also all weather sealant tape as per mfrs recommendationsand also providing ribbed galvalueme ridge pieces of the same class as of the matching corrugation profile of the roofing system as recommended , providing & fixing false ceiling system of trac 150 f exterior grade or approved equivalent of 0.5mm thick galvanised steel with stove enameled coil coated finish inter locking ceiling panels, carriers, suspension system and edge closure as per the following specification. supplying and installation of exterior grade 150 f ceiling system comprising of 150 mm x 17 mm deep panels roll formed out of 0.5 mm galvanised steel with stove enameled coil coated finish. the panels shall be pre-treated and coil coated on one side in manufacturers standard colour shades as approved by the architect/ engineer in charge. the rear side of the panel shall be given a coat of primer and a wash coat while the finished side shall be given a coat of primer and finish colour coat in polyster paint for a min. dry film thickness of 20 microns, fixed on to the roll formed carriers 34.5 mm x 488 mm deep out of 6 mm thick galvanised steed etc

Refer document

Refer document

Refer document