Machinery and Tools, Tools and General Machinery, Cutting Crimping and Punching Tools, Hardware and Fasteners, Screws, Mineral Textile Rubber and Lather, Base Metals, Ferrous Alloy Supply, Construction, Building Material, Sheet, DEORIA-Uttar Pradesh

Supply And Commissioning Of Instruments Under New Poly :- 103 Soil Sample Extractor 104 Sample Container Of Aluminum 50 Mm Dia And 25 Mm High. 105 42.5 Micron Sieve 106 Electrically Heated Oven With Thermostatically Controlled Double Walled Chamber Having 3 Shelves. Maximum Temperature 150”C. 107 Sam Piling Auger Out Screw Type Of Following Dia 38Mm With One Meter Extension Rod. 108 Sampling Auger Outfit Blab Type ( Post Hole Type ) Of Following Dia 50, 100& 150 Mm Each With One Meter Extension Rod, Steel Handle & Piece. 109 Slump Test Apparatus Complete With All Accessories. ( Is:7320 ) – The Mould Should Be In The Form Of A Frustum Of Cone And Should Be Made Of Galvanized Iron Sheet Without Seam .The Dimension Of The Mould Should Be As Given Below.Bottom Diameter :200 Mm With Tolerance +3 Mm / -1.5Mmtop Diameter :100Mm With Tolerance +_1.5Mmheight: 300Mm With Tolerance +_1.5Mhe Temping Rod Should Be A Round Straight Steel Rod Of Diameter 16Mm And Length 600Mm. The Tamping End Of The Rod Should Be Rounded To A Hemispherical Tip. The Diameter Of Which Should Be 16Mm. 110 Vicat Apparatus The Different Parts Of The Apparatus Shall Fulfill The Following Requirement.Framemade Of Cast Iron, Shall Have Smooth Surface.Movable Rod- Made Of Brass, Shall Have Smooth Surface.Cap – Made Of Brass, Needle C- Hilt ( Fitting End ) Mode Of Brass And Shall Have Smooth Surface , Needle Portion Made Of Hardened Steel And Shall Have Polished Surface , Diameter Shall Be 1.13+0.05Mm.Effective Length Excluding The Hilt 50+1Mm, Shallhave A Flat End, Weight 9+0.5G.Needle F – Hilt ( Fitting End ) Made Of Brass And Shall Have Smooth Surface , Needle Portion Made Of Hardened Steel And Shall Have Polished Surface, Diameter Shall Be 1.13+0.05Mm , Effective Length Excluding The 30+1Mm, Shall Have A Press Attachment Hallowed Out So As To Leave A Circular Cutting Edge S+0.1Mm In Diameter The Depth Hollowed Out Shall Be 0.5+0.1Mm, Diameter Of Vent Hole 0.75Mm.The Needle Shall Project

Refer document

INR 7500.0 /-

INR 7.50 Lakhs /-