Tender For Fabrication Of Material At District Stores, Nalgonda For F.Y 2018-19 -Fabrication Of Ms Back Clamps With 50X6mm Ms Flat Suitable For 9.1 Pscc Poles, Including Cutting, Drilling, Bending, Finishing Etc,Fabrication Of Lt 3-Phase 4 Wire Cross Arm With 50X50x6mm Or 65X65x6mm M.S. Angle Including Cutting, Drilling, Bending, Finishing Etc, Fabrication Of Lt 3-Phase 5 Wire Cross Arms With M.S. Angle 50X50x6mm Angle Including Cutting, Drilling, Bending, Finishing Etc., Complete, Fabrication Of Ms Stay Clamps (Set) With 50X6mm Ms Flat Suitable For 9.1 Pscc Poles, Including Cutting, Drilling, Bending, Finishing Etc , Fabrication Of Lt/11Kv Top Insulator Fittings Without Clamps With Ms Channel 75X40 Mm Including Cutting, Drilling, Bending, Finishing Etc, Fabrication Of 33Kv Back Clamps With 75 X 8 Mm Ms Flat Including Cutting, Drilling, Bending, Finishing Etc, Fabrication Of Lt/11Kv Top Insulator Fittings Without Clamps With Ms Channel 75X40 Mm Including Cutting, Drilling, Bending, Finishing Etc, Fabrication Of 33Kv Top Insulator Fitting With Clamps With 100 X 50 Mm Ms Channel & Ms Flat 75X8mm Including Cutting, Drilling, Bending, Finishing Etc, Fabrication Of 33 Kv Stay Clamps (Set) Ms Flat 75X8 Mm For 11 Mtrs Pscc Poles Including Cutting, Drilling, Bending, Finishing Etc, 33Kv Top Insulator Fitting Without Clamp, With 100 X 50 Mm Ms Channel Including Cutting, Drilling, Bending, Finishing Etc, 33Kv V. Cross Arms Without Clamp , 8.0/ 9.1M Pole Guide Clamps With 50X6mm M.S. Flat, Including Cutting, Drilling, Bending, Finishing Etc
