Construction, Building Material, Angle, Plate Supply, Machinery and Tools, Bearings Bushings And Gears, Bearings, Hardware and Fasteners, Bolts, Nuts Supply, Screws, Springs, Washers, Tools and General Machinery, Wrenches and Drivers, Training Equipment,

Sharing tender

Purchase Of Different Items, Trainee Toolkit And Shop-Outfit For various Trades:-1 Adjustable pipe chain tonge to take pipes up to 300 mm, confirming to IS 4123:1982. 2 Adjustable pipe die set BSP cover pipe size 1 or 3/4 3 Adjustable spanner 380 mm long, confirming to IS 6149 (1984) 4 Angle plate 150*150*250 mm confirming to IS 6973 (1973) T-slots 5 Anvil 50 Kgs with Stand confirming to IS:510 -1986 6 Aviation Snips straight Cut 300 mm, High-leverage, compound cutting design, Serrated cutting edges, Bi-material cushion grip. 7 bearing different type each type of diameter 25mm ball bearing, taper roller , roller type needle type thrust ball bearing,angular contact bearing. 8 Bearing extractor Universal gear: - Universal puller for removing pulleys, bearingsMade from forged alloy steel, Rust resistant chrome finish, Reversible jaws for inside and outside pulling, Includes 3 in., 4 in., 6 in., 8 in. pullers. 9 Blow Lamp 0.5 ltr confirming to IS : 1899 - 1977 10 Bolt & Nut with washer M20x2.5x90 Long (part thread - Hex. Head) 11 C.I. Sluice / Gate valve (flanged type) 150NB, Class# 150 Flange: ANSI125-B16.1 12 Caliper hermaphrodite spring type 150 mm, confirming to IS : 4189 – 1966 13 Caliper inside spring type 150 mm, confirming to IS : 4189 – 1966 14 Caliper outside spring type 150 mm, confirming to IS : 4189 – 1966 15 Caps screws M6, M8, M10, M12 16 Carbide Wear Block. 1 mm - 2 mm (2 each) having High Quality & Durability. 17 Cast Iron Globe Valve (Flanged type) 150NB, Class# 150 Flange:ANSI125-B16.1 18 Centre Punch 10 mm & lenth 120 mm, made from alloy tool steel,hardness of 655 HV confirming to IS:7177- 1999 19 Centre punch 100 mm, hardness of 655 HV confirming to IS:7177- 1999 20 CHIESEL COLD -19MM FLATE, confirming to IS 402:1990 21 Chipping hammer:- Made of hardened steel, Spring handle, Heads have to a chisel on one side and a point on the other. Confirming to IS 4915: 1968.