}

Machinery and Tools, Bearings Bushings And Gears, Bearings, Hardware and Fasteners, Bolts, Screws, Miscellaneous Fasteners, Nuts Supply, Retaining Hardware, Washers, Springs, Gaskets and Seals, Gaskets, Seals, Tools and General Machinery, Spare Part, Elec, TPC Proc, R.No 501, D-II, Wing, Sena Bhawan, New D-Delhi

Indian Army-IA has published Machinery and Tools, Bearings Bushings And Gears, Bearings, Hardware and Fasteners, Bolts, Screws, Miscellaneous Fasteners, Nuts Supply, Retaining Hardware, Washers, Springs, Gaskets and Seals, Gaskets, Seals, Tools and General Machinery, Spare Part, Elec. Submission Date for this Tender is 19-04-2018. Bearings Tenders in TPC Proc, R.No 501, D-II, Wing, Sena Bhawan, New D Delhi. Bidders can get complete Tender details and download the document.




Tender Notice

15678064
Machinery and Tools, Bearings Bushings And Gears, Bearings, Hardware and Fasteners, Bolts, Screws, Miscellaneous Fasteners, Nuts Supply, Retaining Hardware, Washers, Springs, Gaskets and Seals, Gaskets, Seals, Tools and General Machinery, Spare Part, Elec
Open Tender
Indian
Delhi
TPC Proc, R.No 501, D-II, Wing, Sena Bhawan, New D
19-04-2018

Tender Details

tender for Rate Contract TATA vehicle Spares(12.89 PLATE (FOR MOUNTING 12.9 `O` RING 12.91 LAMP 24V 21WD 24/1 T529201 12.92 LAMP 24V-4W 12.93 LAMP 24 V 2W 12.94 BRACKET (SHOVEL END) 12.95 GASKET WATER PUMP NLS 12.96 BRACKET (AIR DUCT MOUNTING ) 12.97 VALVE GUIDE STD (EXHAUST) 12.98 COMPRESSION SPRING 12.99 SHIM(2.50) 13 SHIM(3.30) 13.01 SHIM(2.52) 13.02 SHIM 13.03 QUAD RING SEAL 13.04 WHEEL BOLT 45842-1 13.05 BOOT 13.06 SPRING (FOR ACCORD) 13.07 SPANNER DE 8 x10 13.08 GASKET 13.09 BULB G12 V 10W DIN 72601 13.1 GASKET 13.11 OIL SEAL 39X57X9 13.12 SPACING COLLAR 13.13 RUBBER SEAL (SEAL HOLDER TO JOINT 13.14 HEX HD BOLT 13.15 FLANGE HEAD CAP SCREW 13.16 PUSH PULL SWITCH 13.17 SHIM(3.00) 13.18 O RING 13.19 PRESSURE SPRING COMPLETE 13.2 GASKET 13.21 QUARD RING 13.22 PARKING BULB HL 12V4W DIN 72601 13.23 STUD,CAMSHAFT BEARING CAPS 13.24 GASKET 13.25 LAMP 24 V-10W-D-24/1 13.26 RUBER GROMET (COVER BACK) 13.27 SHIM(3.10) 13.28 SHIM(2.40) 13.29 RUBBER TUBE (140) 13.3 RUBER GROMMET 13.31 OIL SEAL CAM SHAFT REAR (COVER) 13.32 VALVE GUIDE STD (INLET) 13.33 SEALING RING 13.34 FRICTION PAD 13.35 PRESSURE SPRING 13.36 HEX SCREW M8X25 IS 1364 P2 8.8 SS 84 13.37 SPRING (BELT TENSIONER) 13.38 DOWEL SLEEVE (FOR STARTER) 13.39 CYLINDER ROLLER 4X8 DIN 5402 13.4 ADAPTER 13.41 SNAP RING 2.68MM THK 13.42 GASKET FRONT COVER 13.43 SEAL RING VALVE 13.44 HEX FLANGE NUT M14X1.5 IS 3722 8 SS 845 13.45 GASKET(FOR SUPPORT) 13.46 GASKET 13.47 COPPER WASHER 13.48 BOOT 13.49 T CONNECTOR 13.5 FUSE 20A YELLOW 13.51 GASKET 13.52 BONDED SEAL 13.53 PIPE UNION BOLT 8M12X1.5 TS 16405 13.54 SIDE SEAL(M.B.CAP REAR) 13.55 GROMMET 13.56 TAB WASHER 13.57 LOCK WASHER 13.58 GASKET RR COVER ADP HSG 13.59 SECURITY RING 13.6 SHIM 0.5 MM THICK 13.61 SEAL `O`RING 13.62 OIL SEAL 13.63 SCREW BANJO CONNECTOR M 12X1.5X24 13.64 FUSE 5A LIGHT BROWN 13.65 SEWLING RING ASSY 13.66 LOCATOR NEGATIVE 13.67 RUBBER BELLOW 13.68 PLUG(OIL GALLARY)

Key Value

Document Fees
Refer document
EMD
INR 3000000.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail