Construction, Building Material, Angle, Sanitary Ware, Strip, Electrical Industry, Battery and Cell, Dry Cell Batteries, Vehicles and Accessories, Railway Machinery, Railway Ancillaries, Machinery and Tools, Tools and General Machinery, Training Equipment, Pukhrayan-Uttar Pradesh

Supply of Tools for Training in various trades, -7.74 Water meter 7.75 Water tub 60 cm dia for sinking 7.76 Weight per litre cup 7.77 Wheat stone bridge complete with galvanometer and battery 7.78 Wheel dresser diamond (inserted 0.75 or 1 carat) 7.79 Wheel dresser huntingon type with star cutter 7.8 White magnetic board with felt board &accessories 7.81 Wing compass 25.4 cm or 30 cm 7.82 Wing compass 300mm 7.83 Wire garge metric and Whitworth 7.84 Wire stripper 20 cm 7.85 Wooden mallet small 7.86 Zig Zag multi purpose machine 7.87 Cylindrical cutter 63 x 90 bore dia 7.88 Cylindrical cutter 80 x 90 bore dia. 7.89 Side and face cutter dia 80 x 8 7.9 Side and face cutter dia 160 x 10 7.91 Side and face cutter dia 100 x 12 7.92 Side and face cutter dia 160 x 16 7.93 Side and face cutter dia 200 x 20 7.94 Side and face cutter dia 100 x 10 7.95 Equal angle cutter 450/100 7.96 Equal angle cutter 600/100 7.97 Equal angle cutter 900/100 7.98 Double angle unequal cutter 50 x 12 x 550 7.99 Double angle unequal cutter 50 x 12 x 600 8 Double angle unequal cutter 50 x 12 x 700 8.01 Double angle unequal cutter 50 x 12 x 750 8.02 Single angle cutter 63 x 18 x 450 RH 8.03 Single angle cutter 63 x 18 x 450 LH 8.04 Single angle cutter 63 x 18 x 600 RH 8.05 Single angle cutter 63 x 18 x 600 LH 8.06 Slitting Saw cutter Ø 75 x 3 X Ø 27 mm 8.07 Slitting Saw cutter Ø 100 x 6 X Ø 27 mm 8.08 Shell End Mill Ø 50 x 36 x Ø 22 (preferably inserted tip type) 8.09 Shell End Mill Ø 75 mm x 50 x Ø 22 (preferably inserted tip type) 8.1 Parallel shank end mills Ø6, Ø10 and Ø 16 are (double fluted), Ø 20 mm & Ø 25mm (four fluted) 8.11 ‘T’ slot cutter with parallel shank- Ø 17.5 x 8 mm width x dia. of shan 8 mm 8.12 Concave Milling cutter Ø 63 x 6 radius x Ø 27 mm 8.13 Disc type form milling cutter (involutes form -2 module, 20° pressure angle) 8.14 Shaping machine 450 mm stroke (motorized) with all attachments 8.15 Shaping machine 315 mm strok

Refer document

Refer document

INR 3 Crore /-