Machinery and Tools, Building Material, Angles, Sheet, Hardware and Fasteners, Bolts, General Hardware, Nails Supply, Electrical Industry, Electrical Product, Electrical Products, Amritsar-Punjab

Supply Of Electric And Hardware Items For Construction Of 1.7 Kms X Integrated Security Fence At Amritsar, 4282 / Qtn / 2017-18 / 03 / Opw 1. Galvanised Barned Wire Of Nominal Dia Of Bar 2.24Mm And 2Mm Dia Barbs At 75Mm Spacing C / C. 2. Concertina Coil Having 2.5Mm Core Dia With Puched Tape Concertina Coil 1A Specification 1050Mm Dia 10 Mtr Openable Length, Having 50-51 Spirals 3. Portland Pozolana Cement ( Pcc ) As Per ( Is-80471-1990 Packed In 50 Kgs Hdpe Conforming To Is 11652 / 2000. Make : Ultratech / Ambuja / Acc / India Cement. 4. Coarse Sand Shall Be Clean, Sharp, Angular Hard And Durable Free From Adherent Coating And Shall Not Contain Clay, Mica And Other Impurities. The Maximum Quantities Of Clay And Fine Silt In Sand Shall Not Be More Than 5% By Mass As Per Is-383-19700 5. Stone Aggregate Shall Be Crushed Stone 20Mm Graded Conforming To Is-383-1970 And Shall Be Clean Hard Tough, Durable And Of Uniform Quality Through Out. The Aggregate Shall Be Free From Soft Disintegrated Materials, Vegetable And Other Organic Impurities. 6. Red Oxide As Prime Coat On Steel Surfaces. Make Shalimar Paints / Berger Paints / Asian Paints. 7. Synthetic Enamel Paint As Finished Coat On Steel Surface ( Superior Tint ) Make : Berger Paints / Asian Paints / Nenson & Nicholson 8. Black Coat Tar Paint As On Hidden Surface Of Ms Angles, Isi Marked. 9. Ismb-100 Having Depth Of Beam 100Mm And Width Of Flanges 70Mm And Weight Not Less Than 11.50 Kgs / Mtr Incl. Cut To Length, Bent To Shape, Drilled Holes For Gusset Plates And Bolting, Welding Work Etc. Complete All As Per Is-808 ( Pt-I ) - 1989 Make : Sail / Tata / Jindal. 10. Mild Steel Ai 50X50x6mm, Cut And Bent, For Desired Shape Of Ib Post Having Langth 3.20 Mtr As In Straight Angle Complete All As Per Is-808 ( Pt-V ) - 1989 Make : Sail / Tata / Jindal. 11. Mild Steel Ai 40X40x5mm, Cut And Bent, For Desired Shape Of Ib Post Having Langth 2.50 Mtr As In Cross Angle Complete All As Per Is-808 ( Pt-V ) - 1989. Make : Sail / Tata / Jindal. 12. 2.00Mm Thick Ms Sheet As In Base Floor Of Sentry Post, Cut To Size, Bent To Shape, Drilling Holes, Welding Etc. Complete All As Per Is-1730 ( Pt-Ii ) Of 1989. 13. 0.50Mm Thick Corrugated Ppgi Sheets As In Roof Coverings Having Tensile Strength 550 Mpa Incl Necessary Drilling Nails / J-Hooks Etc. Make : Sail / Tata / Jindal. 14. 0.50Mm Thick Plain Ppgi Sheets As In Ridge Of Roof Covering Having Tensile Strength 550 Mpa Incl Necessary Drilling Nails / J-Hooks Etc. Make : Sail / Tata / Jindal. 15. 0.50Mm Thick Plain Ppgi Sheets As In Wall Cladding Having Tensile Strength 550 Mpa Incl Necessary Drilling Nails / J-Hooks Etc. Make

Refer document

Refer document

INR 26.36 Lakhs /-