Electrical Industry, Battery and Cell, Battery Chargers, Electric Panel, Electrical Panel, Electrical Motor, Step Motors, Chemical Oil and Gas, Chemical Industry, Chemical Supply, Paints and Primers, Miscellaneous Finishes, Machinery and Tools, Hardware a, Quality Control Lab. Equipment At Jaipur-Rajasthan

Supply Of Quality Control Laboratory Equipment At Jaipur, - 1.01 Supply Of Micro Controller Based Compressive Testing Machine With Automatic Pace Rate Controller, Capacity 2000 Kn. Touch Screen Indicator, Real Time Curve On Indicator With 1.02 ( A ) Capacity: 2000Kn 1.03 ( B ) Resolution : 0.1Kn 1.04 ( C ) Clearance Between Upper And Lower Platens ( Min ) : 320Mm 1.05 ( D ) Platen Size Min : 220Mm 1.06 ( E ) Rame Stroke :50Mm 1.07 The Machine Should Be Suitable For:- 1.08 ( I )  The Compressive Strength Test For Concrete Cubes / Cylinders As Per Is- 516. 1.09 ( Ii ) Machine Should Conform To Is: 14858. 1.1 ( Iii ) Supplied With 10 Inch Touch Screen Digital Indicator, Pumping Unit, Loading Unit 1.11 Specifications Of Digital Indicator:- 1.12 ( I )  Digital Indicator Must Be Touch Screen Tft With 800X480 Pixels 1.13 ( Ii ) Automatic Pace Rate Control To Set Value 1.14 ( Iii )  Configurable Engineering Unit Usb Port Available To Communicate With Software 1.15 ( Iv ) Dynamic Calibration System 1.16  Hydraulic Pump Unit 1.17 ( I )   It Must Have Automatic Pace Rate Control Facility 1.18 ( Ii )  Single Phase, 0.5 Hp Stepper Motor Driven Two Hydraulic Pump Seal Free 1.19  Loading Unit 1.2 ( I ) The Loading Frame Should Be Fully Welded Construction With A Top Crosshead, Base, And Solid Side Plates 1.21 ( Ii ) Metal Door With A Perspex Window Should Be Available For Operator’S Safety 1.22 ( Iii ) Suitable Size Of Spacers Provided 1.23 ( Iv ) Must Be Supplied With Manufactures In-House Nabl Accredited Calibration Certificate 1.24 Supply Of Digital Flexure Testing Machine With Automatic Pace Rate Controller Capacity 100 Kn. 1.25 The Flexure Strength Testing Machines Are Designed To Test Flexural Strength Of Concrete Beams. The Design Provide Maximum Rigidity Throughout Their Working Range. 1.26 Flexure Testing Machines Salient Features :- 1.27 ( I )      Electrically Operated. 1.28 ( Ii )   Digital Display. 1.29 ( Iii )    Pace Rate Indicator. 1.3 ( Iv )   Data Storage Facility. 1.31 ( V ) Suitable For 100X100x500 And 150X150x700 Mm Concrete Samples. 1.32 ( Vi )  Supplied With Hydraulic Pumping Unit, Lading Frame And Digital Indicator. 1.33 ( Vii )         Supplied With Manufacturers Nabl Calibration Certificate. 1.34 Supply Of Asphalt Content Tester 1.35 To Find Out The Bitumen Content Is Most Important And Critical Activity In Road Construction For The Better Quality Roads. The Conventional Benzene Method Is Not Quick And Accurate. Ignition Method Developed By Ncat Usa Is More Accurate, User Friendly And Quick To Measure The Bitumen Content. 1.36 Machine Ref. Standard Astm D6307 & En 12697 39 This Machine Is Used To Determine The Asphalt Content Of Hot Mix Asphalt ( Hma ) Paving Mixture And Pavement Samples By Removing The Asphalt In An Ignition Furnace By Means Of Sample Heating Not By Means Of Solvents. Machine Should Have Digital Display Of Temperature And Must Have Inbuilt Printing Facility To Generate A Receipt That Will Contain All Test Parameters. 1.37 Suitable For Operation On 415V, 50Hz, 20A, 3Phase, Ac Supply. Manufacturer Must Have Irc Accreditation 1.38 Specifications 1.39 Max Weight Of Specimen: 4500G 1.4 Suggested Weight Of Specimen: 1000 To 1500G 1.41 Accuracy Of Electronic Balance- 10Kg X 0.01G 1.42 Size Of Furnace: 350 Mm X 440 Mm X 330 Mm 1.43 Max. Working Temperature: 8000 C 1.44 Standard Working Temperature: 5380 C 1.45 Testing Time- 30 To 40 Min 1.46 Supply Of Accelerated Curing Tank For 12 Moulds Of 150Mm X 150 Mm Size 1.47 Specifications :- 1.48 ( I ) Temperature Range 5 Degree To 100 + 2 Degree 1.49 ( Ii ) Suitable For 12 Cube Moulds Of 150 Mm 1.5 ( Iii ) Fully Insulated 1.51 ( Iv ) Complete With Hinged Lid, Heater, Thermostat And Recirculation Pump 1.52 ( V ) Two Removable Racks 1.53 ( Vi ) Arrangement For Free Circulation Of Water Around Each Cube 1.54 ( Vii ) Pump, Drain Valve And Other Electric Equipment Must Be Housed In A Separate Compartment. 1.55 ( Viii ) Fully Powder Coated 1.56 ( Ix ) Three Phase Indicator In The Front Panel For Presence Of Supply In Individual Phases. 1.57 ( X ) Water Circulating Pump Crompton Greaves Make. 1.58 ( Xi ) Hydraulic Door Closer 1.59 ( Xii ) Water Level Sensor Inside The Chamber 1.6 ( Xiii ) Outlet Valve To Be Changed To 1” From 1 / 2 ”. 1.61 ( Xiv ) Act Tray Is Made In Two Part. 1.62 ( Xv ) Levelling Screw 1.63 ( Xvi ) Suitable For Operation On 440V, 50Hz. Three Phase, Ac Supply 1.64 Supply Of Auto Digital Level 24X With Standard Deviation Of 1 Km. Double Run Levelling + 2.5 Mm. Erect Image, Magnetic Compensator. Including Aluminium Stand, Aluminium Staff And All Other Necessary Accessories. 1.65 Supply Of Digital Theodolite Having 1” Least Count And 5” Accuracy Along With All Standard Accessories ( Battery, Battery Charger, Operation Manual, Tool Kit And Carrying Case ) . Including Open Frame Wind Resistance Telescopic Tripod, 3 Legs Of Aluminium With Adjust Central Lock, Aluminium Staff And Other Necessary Accessories.

Refer document

Refer document

INR 20 Lakhs /-