Construction, Road Construction, Road Work, Drilling Work, Drilling Work, Vehicles and Accessories, Railway Machinery, Railway Ancillaries, Machinery and Tools, Material Handling Machinery, Industrial Trucks, Dhanbad-Jharkhand

Tender For Patratu-Garhwa Road - Trr ( P ) - 29.775 Km. Under Assistant Engineer, E. C. Railway, Latehar & Daltonganj. - Supply Of Approved Quality Of Glue And Applying On Gr Pad For Its Entire Area At Each Rail Seat And On Psc Sleepers , Loading Of Old Rails, Sleepers Fitting & Fastening Into Rly. Wagons / Bfr With All Lead Lift, Crossing Track Etc. Complete A ) Rail 52Kg / 90R , Cutting Rails 60Kg / 52Kg. / 90R Rail In Running Lines / Cess By Hacksaw Blade ( Hacksaw Blade Will Be Supplied By The Contractor At His Own , Drilling Holes In Rail Of Any Section Inside / Outside Track By Wretchet , Boxing & Dressing Of Ballast To Achieve Ballast Profile As Per Lwr Manual Including Filling Up Of Ballast In Crib Up To Sleeper Level And Tightening Of Loose Fitting , Inserting Sej Including Removing Of Existing Sleeper & Fittings, Fixing The Angle Iron After Providing The Gap Including Packing Etc. Complete , Supply Of Petrol At Site Of Work @ 1.6 Ltrs. For Welding Of 52 Kg / 90R Rail Joints And 1.8 Ltrs. For Welding Of 60 Kg. Rail Joints Including Supply Of Necessary Skilled And Unskilled Labourers For Welding Of 52Kg / 60Kg / 90R Rail Joints In Situ By Skv Process Including All Operations In Line Providing Gap At Joints Levelling , Digging Of Rail By Jim Crowing Where Necessary, Fixing Of Wooden Block To Support The Rail Ends By Shifting 2 / 3 Sleeper On Either End Of Joints To Facilitate Providing Of Wooden Block Below Rail, Cutting Chipping Of Excess Welded Materials For Welded Joints And Filling The Joints To Standard Profile And Bituminous Painting As Per Direction Of Engineer At Sit.A ) 10 Rail / 20 Rail To Lwr / Cwr , Supply Of Petrol At Site Of Work @ 1.6 Ltrs. For Welding Of 52 Kg / 90R Rail Joints And 1.8 Ltrs. For Welding Of 60 Kg. Rail Joints Including Supply Of Necessary Skilled And Unskilled Labourers For Welding Of 52Kg / 60Kg / 90R Rail Joints In Situ By Skv Process Including All Operations In Line Providing Gap At Joints Levelling , Digging Of Rail By Jim Crowing Where Necessary, Fixing Of Wooden Block To Support The Rail Ends By Shifting 2 / 3 Sleeper On Either End Of Joints To Facilitate Providing Of Wooden Block Below Rail, Cutting Chipping Of Excess Welded Materials For Welded Joints And Filling The Joints To Standard Profile And Bituminous Painting As Per Direction Of Engineer At Sit. B ) Single Rail To 3 Rail Panel , De- Stressing Of Lwr / Cwr Track Laid On Psc Sleeper Within Specified Range Of Temperature With Or Without Using Rail Tensor As Per Procedure Laide Down In Irpwm / Lwr Manual. The Rate Also Include Labour All Equipments, Cutting Rails, Drilling Holes, Putting Clamps At Joint Whenever Needed Etc , Trollying Rails / Switches / X- Ing By Dip Lorry / Rail Dolly Or Any Other Means Up To A Distance Of 01Km. Including X-Ing Of Track With All Lead , Lift, Crossing Of Multiple Lines Of Site In- Charge With Contractors Dip Lorry / Rail Dolly Etc. , Painting Of Rail By Anticorrosive Paints As Per Standard Specification. Panting Of Rails Of Shall Be Done After Scrapping Of Red Oxide And Two Coats Of Black Bituminous Anti Corrosive Paints. The Rates Are Inclusive Of All Paints, Plants, Equipments Other Consumable Including All Lead, Lift Crossing Of Track Etc. , Insertion Of Glued Joint ( 52Kg / 60Kg ) . The Rate Include Required Cutting Of Rail By Hacksaw , Drilling Of Bolts Holes Holes , Removal Of Exiting Rail And Providing Necessary Fitting / Fastening After Placing The Glued Joint In Track , Cleaning Greasing Of Erc With Approved Quality Contractors Greases As Per Irpwm. After Greasing Fitting Should Be Refixed. A ) Erc , Mci Inser , Cleaning Greasing Of Erc With Approved Quality Contractors Greases As Per Irpwm. After Greasing Fitting Should Be Refixed. B ) Fish Plated Joints ( Fish Plate, Bolts, Nuts, Holes ) ,

INR 10000 /-

INR 300640.0 /-

INR 3.01 Crore /-