Machinery and Tools, Bearings Bushings And Gears, Bearings, Building Material, Plate Supply, Tools and General Machinery, Power Tools, Hardware and Fasteners, Screws, Electrical Industry, Electrical Product, Conductor, Light and Bulbs, High Mast, LED Ligh, Lumding-Assam

Supply, Carrying And Commissioning Of High Mast Tower 16 Mtr Height With Its Accessories .Mast Shall Be In One Section, Hot Dip Galvanized, Ring Size Minimum 60Mm Od, Minimum Galvanization = 85Micron. Suitable For Wind Zone-4 Air Velocity As Per Is-875, And Sheet Thickness Should Be 6 Mm Including Accessories Like Head Frame, Steel Wire Rope 6 Mm Dia ( 7 / 19 Construction ) , Trailing Cable, Double Drum Winch, Galvanised Lantern Carriage Arrangement Suitable For 6 Luminaries Symmetrically Boxes And Lightning Finial. The Mast Shall Have An Integral Power Tool Installed Inside The Base Compartment For Its Operation. ( Bidder Must Submit Wind Tunnel Test Certificate As Per Is-875 As Well As Authorization Letter From Principal Manufacturer After Issue Of Loa And Before Execution Of Work. Warranty Certificate Of Tower, Type Test Certificate & Quality Assurance Plan Certificate, Design Of Foundation Plan And Drawing From Oem To Be Furnished Before Execution Of Work. ) The Work Should Be Done As Per Direction Of Engineer In Charge At Site. , Design, Supply And Construction Of Suitable Rcc Foundation With 1:2:4 Cement Concrete Of Suitable Size And Depth As Per Manufacturer Recommendation And As Per The Soil Bearing Capacity At Site At 10 Ton / Sq.Mtr With All Materials And Labour ( For 16 Mtr High Mast Tower ) , Supply, Erection, Testing And Commissioning Of 3 Phase, 11 / 0.433 Kv, 63 Kva 3 Star ( Outdoor Type ) , Dyn11 Aluminium Wound Transformer Step Down With First Filling Of Insulating Oil ( As Per Is 335 ) Complete Set With All Fittings And Accessories Including Re-Connection Of All Associated Cables, Acsr Conductor, Etc For Successful Commissioning Of Transformer. ( The Work Will Also Involve Dismantling The Existing Transformer And Shifting To Power House / Lmg. All Necessary Materials Required For Successful Commissioning Of Transformer On The Cc Pad Shall Be Provided By The Contractor ) .The Entire Work To Be Executed As Per Direction Of Engineer In Charge At Site. , Supply, Fitting, Fixing, Connection & Commissioning Of 25 Watt Led Outdoor Fitting Complete Set With Pressure Die Cast Aluminium Housing Of Ip65 And Other Accessories For Successful Illumination Of Led Fitting. The Contractor Should Submit Warranty Certificate From Manufacturer To The Sse / Elect / Cpk , Supply And Erection Of Lt Stay Set Complete With 7 / 14 Swg Stay Wire, Anchor Plate, Thimble, Bow, 18 Inch Straining Screw, Lt Guy Insulator And 19 Mm Dia, 1.8 Metre Long Lt Stay Rod. Lt Stay Rod Shall Be Buried Underground By Digging Of Earth To A Depth Of 6X1x1 Feet And Concreting The Same With 1:2:4 Concrete Upto The Height Of 1 Feet Above The Ground Level. Lt Guy Insulator Shall Be Provided At A Height Of 12 Feet Vertically Above The Ground Level Etc

INR 3000 /-

INR 46070.0 /-

INR 23.03 Lakhs /-