Construction, Railway Construction, Track Work, Dhanbad-Jharkhand

Deep Screening Of Track Ballast Including Opening Of Ballast Digging Below And Between Sleepers To A Maximum Depth Of 30Cm From The Center Of Track To Cess Width For 4.80M Screening Of Same By 20Mm Square Wire Mesh Haunch Cleaning And Throwing Away All Muck Arising Out Of Screening And Haunch Cleaning Beyond Cess Of Bank Slop Of Cutting Catch Water Drain And Water Away Of Bridge And Putting Back The Screened Basket Bulk Into Track ( Including All Lead & Lift ) Including 100Mm Lifting Of Track, Wherever Required To Bring The Track To Designed Level. And Grade With One Katcha Packing And Two Round Of Through Packing For Permitting Speed Of 45Kmph. The Item Also Includes Dressing And Boxing Of Ballast To Proper Profile As Per Availability Of Ballast And Direction Of Pwi , Fabrication Of Level Crossing Check Rail 90R / 52Kg. Including Fittings Complete In All Respects , Pre And During Bcm Work: Execution Of Pre And During All Works Associated With Bcm Machine Working Including Attention To Low Joints, Removal Of All Infringements On Ahead And Back Of Bcm Machine And Including Supply Of Adequate Labour Along With Bcm Machine For Smooth Operation Of Bcm During Block Period Post Bcm Work: Execution Of All Works Associated With Bcm Machine After Deployment Of Bcm Machine Including Putting Of Ballast In To The Track, Dressing Of Ballast To Proper Profile, Dressing The Full Width Of Cess After Removing Muck Behind The Bcm Working, Re -Fixing Of Reference Posts ( Which Were Removed Prior To Machine Working ) , Cleaning Jungle On The Cess, Fixing Of Broken / Fallen Fittings Etc , Boxing And Dressing Of Ballast To Achieve Ballast Profile , De-Stressing Of Lwr / Cwr Track Laid On Psc Sleeper Within Specified Range Of Temperature With Or Without Using Rail Tensor , Manufacturing & Fixing Of Guard Rail Of Standard Length As Per Irpwm / Irbm Including Cutting , Bending , Lifting Of Track Upto 150 Mm Including Two Rounds Of Packing, Spacing Of Sleepers, Squarring Of Sleepers And Providing , Throwing Away Muck Out Of Cutting / Yard Etc. Including Drains With All Lead & Lift Etc , Deep Screening Of Fan Shaped Pts. & Xing In Running Track First Upto Depth Of Cushion Available And Subsequent Lifting Deep Screening Of Fan Shaped Pts. & Xing In Running Track First Upto Depth Of Cushion Available And Subsequent Lifting, If Required To Provide Clean Cushion 300 Mm For Full Width Of Ballast Profile Along The Entire Length Of Pts, & Xing Layout Including Initial Packing , Through Packing Of 1 In 8.5 / 1 In 12, 52 Kg / 60 Points And Xing Assembly ( Including Lifting In Stages Maximum Up To 75 Mm , Through Packing Of 1 In 8.5 / 1 In 12, 52 Kg / 60 Points And Xing Assembly ( Including Lifting In Stages Maximum Up To 75 Mm , Overhauling Of L.C. Gate To Provide Clean Cushion Up To 300 Mm. By Digging Below The Sleeper & Removing Ballasted Track / Earth For A Total Width Up To 4.8M . Ballast Should Be Separated From The Muck And Put Back , Complete Taking Out Alternately Or In Patches Of Existing Fittings Like Elastic Rail Clips, Rubber Pads, Liners Etc From Psc Sleepers Of Running Cwr / Lwr / Swr Track And Simultaneous 100Perc. Fixing In Proper Position ( At Removed Places ) Of New Rubber Pads Gfn Liners, Rail Clips Etc

INR 3000 /-

INR 67240.0 /-

INR 33.61 Lakhs /-