Machinery and Tools, Manufacturing Machinery, Machine Tools, Hardware and Fasteners, Springs, Palanpur-Gujarat

Supply Of Tools & Equipments: Group- Mechanical: 614 Stake Hatchet. 615 Stake Grooving 616 Gauge Plug Single 3 Ended 5 To 55 By 5 Mm Set Of 11 Pcs. 617 Planishing Hammer. Weight - 0,438 Kg, Round Orb And Square Face 618 Card File For Cleaning File 619 Caliper Inside 15 Cm Spring 620 File Knife Edge 15 Cm Smooth (Make : Jk /Gador /Tapariya) 621 Sleeve Drill Morse 0–1, 1–2, 2–3 622 File Hand 15 Cm Second Cut 623 Adjustable Pipe Tap Set Bsp With Die Set Cover Pipe Size 15,20,25,32,38,50 Mm. 624 File Feather Edge 15Cm Smooth (Make : Jk /Gador /Tapariya) 625 File Square 15 Cm Second Cut (Make : Jk /Gador /Tapariya) 626 File Warding 15 Cm Smooth. (Make : Jk /Gador /Tapariya) 627 File Triangular 20 Cm Second Cut (Make : Jk /Gador /Tapariya) 628 File Round 20 Cm Second Cut (Make : Jk /Gador /Tapariya) 629 File Half Round 25 Cm Bastard (Make : Jk /Gador /Tapariya) 630 Snips Bent 25 Cm. Cuts Through 18Ga Cold Rolled Steel, 4-Inch Length Of Cut, Hot Drop Blades Remain Sharp, Cuts Wide Curves 631 Hacksaw Frame - Fixed - 300 Mm (Pistol Grip) 632 Taps And Dies Complete Set In Box 3 -18 Mm Set Of 10. 633 Soldering Iron 350 Gm. 634 Hand Reamer Taper Max 4 -9 Mm Set Of 6 Or 4 -7 Mm Set Of 4. 635 Box Spanner Set 6-25 Mm Set Of 8 With Tommy Bar 636 V- Block Pair 7 Cm & 15 Cm With Clamps. 637 Chisel Cold 9 Mm Round Noze 638 Dot Slot Punch 10 Cm. 639 Reamer Parallel 12 -16 Mm Set Of 5. 640 Caliper Out Side Spring Joint 150 Mm 641 Divider Spring Joint 150 Mm 642 Square Adjustable 15 Cm Blade 643 File Half Round Second Cut 15 Cm. (Make : Jk /Gador /Tapariya) 644 Hardle. 645 Pully Puller, Three/ Four Leg Having And Standard Quality I.S.I. Mark Make- Tapariya/ Gador/ Jhalani/ Jk/ Ambika 646 File Half Round 200 Mm 2Nd Cut A Standard Half Round File Second Cut Type Made Up (High Carbon Steel), Having Dimensions Of 200 X 20.6 X 5 Mm (Lx W Xt) And Handle Made Red Coloured Sheesham Wood Or Good Quality Plastic.. Make- Jk /Gador /Tapariya 647 Electrician Screw Driver Thin Stem Insulated Handle, 250 Mm, The Blade Is Made From High Grade Silicon Manganese Steel, Full Harden And Tempered Withstand High Torque Requirements And Magnetise To Lift Screws. It Is Also Effectivelly Protected Againist Corrosion By Nichel Chrome Plating. I.S.I. Marked .Make -Tapariya, Jhalani, Ambika 648 Try Square 10 Cm Blade. 649 Engineer Square Try 10 Cm

INR 1500 /-

INR 23000.0 /-

Refer document