BRR : 7804241 Tender For Annual Maintenance Of Various Civil Works At 11 (Eleven) Storied Building Of Commercial Tax Office At North Block Of Jalasampad Bhawan, Salt Lake For The Year 2025-26. - 1 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (b) For Concealed Work(i) CPVC Pipes Class-1,SDR-11Dia 15 mm 2 Dia 20 mm 3 Dia 25 mm 4 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor)or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials(A)Above ground (ii) 110 mm dia. 5 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i)Single Socketed 3 Meter Length(i) 110 mm 6 (iv)Double Socketed 1.8 Meter Length(i) 110 mm 7 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). (ii) 80 mm dia. 8 Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 9 Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar (i) 15 mm 10 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including twocoats of painting to bracket etc. 11 Supplying fitting and fixing E.W.C in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.a) With P Trap 12 Supplying, fitting and fixing urinal flush pipe fittings of approved brand.(a) C.P. urinal flush pipe fittings range of one 13 Supplying, fitting and fixing shower of approved brand and make. (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). 14 Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size 15 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(iii) 600 mm long 16 Supplying,fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iii) 600 mm long 17 Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush Pipe 18 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (i) 450 mm X 300 mm 19 Supplying, fitting and fixing towel rail with two brackets.(b) Aluminium (ii) 25 mm dia. and 600 mm long 20 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within alead of 75m as directed. 21 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/stagingwhere necessary (Ground floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar (i) 15 mm thick 22 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.10-12 Micron thickness Annodizing filmNatural white 23 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.ii) 4mm thick coloured / tinted / smoke glass. 24 (i) 4 mm thick clear glass 25 Door stopper (Anodised aluminium) 26 Godrej Hydraulic door closer fitted and fixed complete.(b) Medium type 27 Supplying, fitting fixing I.S.I. approved quality and brand hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge. 28 Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1.5 mm thick) 29 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. (In Ground Floor) : (a) One Coati) Water based interior grade Acrylic Primer. 30 Synthetic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothning of surface.Two Coats. 31 Supplying PVC rollers for sliding windows as per direction of Engineer in charge. 32 Supplying maruti lock (100mm). 33 Painting roof surface with fiber reinforced elastomeric liquid water proofing membrane @ 0.93 sqm/ litre including cleaning roof surface sealing cracks using fiber glass reinforced crack filling compound as per direction of Engineer-in-charge all complete including material,labour etc. 34 Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete.[Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]In ground floora) Area of each Granite slab 0.6 to 1.0 Square meter.(i) Ground Floor 35 First Floor 36 Second Floor 37 Third Floor 38 Fourth Floor 39 Fifth Floor 40 Sixth Floor 41 Seventh Floor 42 Eighth Floor 43 Ninth Floor 44 Tenth Floor 45 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge 46 Plumber 47 Muchhers Jamadars 48 Mazdoor

BRR : 9134133 Tender For Tit- Bit Civil Work Along With Repair And Maintenance, Paintaing Work Of Kalyani Division Office Under Kalyani Division In The District Of Nadia- 1 Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m in ground floor including roof 2 b) In first floor 3 in second floor 4 in third floor 5 Dismantling all types of masonry excepting cementconcrete plain or reinforced, stacking serviceablematerials at site and removing rubbish as directedwithin a lead of 75 m. In ground floor including roof 6 b) In first floor 7 in second floor 8 in third floor 9 Dismantling all types of plain cement concreteworks, stacking serviceable materials at site andremoving rubbish as directed within a lead of 75m.in ground floor including roofupto 150mm thick 10 b) In first floor 11 in second floor 12 in third floor 13 Dismantling R.C. floor, roof, beams etc. includingcutting rods and removing rubbish as directedwithin a lead of 75 m. including stacking of steelbars. 14 b) In first floor 15 in second floor 16 in third floor 17 Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necess-ary trimming thesides of trenches, levelling, dress-ing and ramming thebottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm 18 Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layer complete. (Payment to be made on the basis ofmeasurement of finished quantity of work)(a) With earth obtained from excavation of foundation 19 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 20 Cutting holes and subsequent mending good damages. (a) Diameter upto 150 mm. (i) In brick work [Cement-4.0 Kg/Mtr] 21 Cutting chase upto 125 x 150 mm. and subsequentmending of damages.(a) in brick wall [Cement-3.6 Kg/Mtr] 22 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineerin charge. 23 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 24 Cement concrete with graded stone ballast (40 mm size excludingshuttering)In ground floor(A) [Pakur Variety](a) 1:3:6 proportionr and foundation 25 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any as per relevant IS codes. a) Pakur Variety in ground floor 26 b) In first floor 27 in second floor 28 in third floor 29 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominalsize excluding shuttering and reinforcement,if any,as per relevant IS codes. Pakur variety in ground floor 30 b) In first floor 31 in second floor 32 in third floor 33 Extra rate for using water proofing and plasticising admixture @ 0.2% byweight of cement (or at manufacturers specified rate) for concrete of variousgrades. 34 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety in ground floor 35 b) In first floor 36 in second floor 37 in third floor 38 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.a) For works in foundation, basement and upto roof of ground floor / upto 4m.Tor steel/Mild Steel.JSW/JSPL/SHYAM/ SRMB/BMASL/ELECROSTEEL/SSL 39 Brick work with 1st class bricks in cement mortar (1:6) In foundation and plinth 40 In superstructure-ground floor 41 In first floor 42 in second floor 43 in third floor 44 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.a) In ground floor 45 b) In first floor 46 in second floor 47 in third floor 48 Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc.(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m Other than Coloured decorative including white 49 A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m& joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.mOther than Coloured decorative including white 50 Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cementand colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal ofwax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to themanufacturer sspecification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be suppliedby the contrr]e)I(I) With application slurry @1.75 kg/ Sq.m, 20 mm sandcement mortar (1:4) & 2 mm thick cement slurry at back sideof tiles, 0.2 kg/ Sq.m white cement for joint filling withpigment.(A) Light colour(Gr.floor) 51 Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick)(i) Ground floor 52 In 1sl floor 53 in second floor 54 in third floor 55 Labour for taking out door and window frame including shutter for repair orreplacement of different parts of the frame & refixing the same including mendinggood all damaes complete. (Concrete and brick work for mending damage will bepaid separately)a) Upto area 2.5 Sq.m 56 M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S. W.I. flats and bars for windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.i) Grill weighing above 16 Kg./sqma) In ground floor 57 b) In first floor 58 in second floor 59 in third floor 60 Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) 61 M.S. structural works in columns, beams etc. with simple rolledstructural members (e.g. joists, angle, channel sections conformingto IS: 226, IS: 808 & SP (6)- 1964 connected to one another withbracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming toIS: 816- 1969 & IS: 1995 using electrodes of approved make andbrand conforming to IS:814- 2004, haulage, hoisting and erectionall complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools andplants and labour required for the work including all incidentalchages such as electricity charges, labour insurance charges etc.II) For Structural Works in Roof Trusses etc. using joists, channelsand angles of specified section weighing less than 22.5 kg/ m 62 Supplying, fitting and fixing windows and ventilators with or withoutintegrated grills conforming to IS 1038-1975 and manufacture from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket,handle plate etc, including hoisting in position,straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing fixed with neceessary clamps and nuts and bolts and erected complete.(ii) below 50mm.(a) Fixed type steel windows as per IS sizes with horizontal glazing bars. 63 (b) Openable steel windows as per IS sizes with side hung shuttersand horizotal glazing bars. [The extra rate admissible for theopenable portion only] 64 steel peg stay 300 mm long including fitting and fixing. 65 Two point nose steel handle including fitting and fixing. 66 Taking out M.S. or W.I. Grills from wooden frame including cuttinglugs from masonry wall and refitting the same and mending gooddamages after repairs. (Excluding the cost of necessary repair ofdamages) or doing any other necessary works 67 Easing, oiling and adjusting the steel shutters including scraping allmembers and fitting so as to make the shutters easily operable (noextra payment will be made for taking out and fixing glass, ifnecessary). 68 Renewing M.S. members of steel shutters by welding including takingout the old, mending good damages complete, including taking outand refixing the glass panes. 69 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(c) Sal : Local 70 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor.(In case of35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 71 Door stopper.(Brass) 72 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed. a) With continuous plate base (Hexagonal / Round rod), (i)75 mm grip x 10 mm dia rod. 73 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI100mm. X 75mm. X 3.5 mmmark. 74 Anodised aluminium barrel / tower / socket bolt (full covered) of approvedmanufactured from extruded section conforming to I.S. 204/74 fitted and fixedwith cadmium plated screws:ix) 300mm long x 10mm dia. bolt. 75 Anodised aluminium Aldrop / Sliding bolts of approved quality manufacturedfrom extruded section conforming to I.S. specification (I.S. 2681/66) fitted andfixed complete.300mm x 16mm dia. Bolt 76 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. 77 PVC Door Shutter-37 mm thickSupplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mm x 80mm and other 100mm x 100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and and appliencies. Carriage of all materials taxes and all other incidentalcharges complete.The rate is exclusive of cost of hinges, hasp bolt, towerbolt,door ring etc.In ground floor 78 in first floor 79 in second floor 80 in third floor 81 Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 6 mm thick High Pressure Steam Cured NonAsbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge.In ground floor.False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid T-2430). 82 Supplying profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work).(B) 15 Micron colour annodizing. k) Movable door shutter ., i) Door frame. (Top & sides) 83 ii) Shutter :Top rail 84 Bottom rail 85 Door Vertical 86 Lock rail 87 Glazing cleap 88 Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminium sections for the following units:- (B) Partly glazed partly panelled or fully glazed single leaf alunminiumswing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry setneoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge. 89 Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987. i) 4mm thick clear glass. 90 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filledwith foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) . (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) 91 Supplying profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work).(B) 15 Micron colour annodizing. i)natural White., Fixed partitions.(ii) Coloured(Unsupported length of vertical member more than 1.5 mtr.or both ends of vertical member restrained but panels more than 0.9 Sq.m)Top , bottom & side member. 92 Intermediate member. 93 Glazing clip. 94 Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge. 95 Supplying heavy duty top pin/set of pivots of local make and approved by the Engineer-in-charge. (This item to be provided where floor spring not 96 Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge.250 long 97 Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.(weatger gasket/woolpile) 98 Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width 99 Extra for each additional floor 100 Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturers specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.). Membrane Property: Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse) 101 Repairs to cracks in terraced roof by cutting V-grooves 75 mm. to 100 mm. deep and 150 mm. to 200 mm. wide and filling the same with beaten lime concrete (2:2:7) with lime putty / paste and finishing complete (2 lime putty / paste : 2 surki : 7 brick khoa ) 102 Labour for painting roof surface with Bitumen (using 135 kg (avg.) per % Sq.m.)including cleaning roof, heating bitumen as directed and spreading sand and complete including cost of sand @ 0.6 cu.m. per % Sq.m. and cost of carriage of Bitumen from deptt godown but excluding the cost of bitumen. (If heating is not reqd. then deduct Rs.3.45/- per Sq.m) 103 Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturers specification [Cement to be supplied by the Department] 104 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including, rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface including threading nosing and drip course where necessary.i) With 1:6 cement mortar.a) 20 mm thick plaster.In ground floor 105 In first floor 106 in second floor 107 in third floor 108 15 mm thick- In ground floor. 109 In first floor 110 in second floor 111 in third floor 112 ii) With 1:4 cement mortar.10 mm thick plaster. 113 In first floor 114 in second floor 115 in third floor 116 Neat cement punning about 1.5mm. thick in wall, dado, window sills, floor, drain etc. 117 Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) 118 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) 119 Applying Exterior grade Acrylic Primer of approved quality and brand on plastered or concretesurface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior Immersion paint including scrapping and preparing the surface thoroughly, complete as per manufacturers specification and as per direction of E.I.C(i)One coat .In ground floor 120 Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrylic primer as required.The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.b) NORMAL Acrylic Emulsion.In Ground floor (Two Coat) 121 Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. 122 Priming one coat on timber or plastered or surface with synthetic oil bound primer of approved quality including smooth ening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 123 Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 124 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.(a) On timber or plastered surface :With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) 125 (b) On steel or other metal surface :With super gloss (hi-gloss) (iv) Two coats (with any shade except white)-With super gloss (hi-gloss) - 126 Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)3 mm thick (weighing 7.4 kg/Sq.m) 127 Renewing worn out putty of glass panes :Panes not exceeding 0.2 Sq.m 128 Supply fitting approved type ventilator in position after cutting holes in walls setting in cement mortar, mending damages to wall and plaster and two costs of point of approved brand and shade.(b) R.C.C ventilator of 20 mm. thicki) Upto 0.10 Sqm. Area 129 Artificial stone in floor, dado, staircase etc with cement concrete(1:2:4) with stone chips, laid in panels as directed with toppingmade with ordinary or white cement In ground floor. (as necessary) and marble3 mm. thick topping (High polishing grinding on this item is notpermitted with ordinary cement).(ii) 25 mm th.(i) Ground floor 130 Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wallafter unscrewing bolts, nuts, screws etc.andstacking the material at site as directed. 131 Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)(i) In Roof:-b) With 0.60 mm thick sheet 132 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 133 (f) 25 mm to 30 mm shuttering without staging in foundation 134 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming toIS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining with jointing materails (SpunYarn,Valamoi/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. 135 Plain Tee.110 mm. Dia. 136 Plain Y.110 mm. Dia. 137 Bend 87.5 degree.110 mm. Dia. 138 Shoe.110 mm. Dia. 139 Uprooting and removing plants from the surface of wallsparapet etc and making good damages. (Repairing ofdamages to be paid separately) 140 Wood work in upper rails of railing, hand rail of staircase, balcony etc. includig1st class best Indian teak.necessary bend, moulding fitted and fixed complete (for purpose of paymentsection will be measured in the square 141 Renewing throating,nosing or drip course moulding with 15 mm.thick cement plaster (1:4) complete. (Cement 0.7Kg/Mtr.)In ground floor. 142 Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in- Charge prior to execution will be necessary).(Payment to be made on area cleared) 143 Spot application for insecticides using Aqua basespray for pest (for bugs, cockroaches, silverfish,spider, termites, mosquitoes) to walls and ceiling etc.with chemical emulsion by admixing chloropyrofosemulsifiableconcentrates (1% concentration) withwater by weight including spraying the emulsified chemical @ 0.5 litres per sq.m. by a hand operated pressure pump on wall surfaces, ceiling, electrical fixture,electrical lines including drilling holes in places where source of termite is detected squirtingchemical solution into the holes and sealing the holes with cement grout. (Rate is per sq.m. of the floor areawhile actual work will be all walls ceiling, rack, partition and furniture). 144 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union cross, elbow nipple, long screw reducting socket reducing tee, short piece etc. fitted withholder bats clamps, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground (payment will be made on the center line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials)(a) For Exposed Work i) 15 mm dia medium quality 145 ii) 20 mm dia medium quality 146 ii) 25 mm dia medium quality 147 (B) For Concealed Work15 mm dia. medium quality 148 20 mm dia. medium quality 149 25 mm dia. medium quality 150 Chromium plated round shower with revolving joint (Equivalent toCode No. 541(N) & Model - Tropical / Sumthing Special of ESSCO orsimilar brand). 151 Supplying, fitting and fixingpillar cock ofapproved make---CP pillar cock-15mm{Essco or similar band] 152 Supplying, fitting, fixing G.M wheel valve of approved brand and made tested to 21 Kg. Per sq. cm. (for water lines only.) --- i)20mm. 153 25mm 154 40mm 155 Supplying, fitting and fixing bib cock or stop cock.Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand). 156 Chromium plated Stop cock [Equivalent to Code No.513(A) & 513(B) & Model - Tropical/Sumthing of ESSCO or similar brand] 157 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.ii) 600 mm X 450 mm 158 Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. b) With S trap (with vent) 159 Supplying, fitting and fixing towel rail with two brackets.a) C.P. over brass.b) I) 25 mm dia and 450 mm long 160 Supplying, fitting and fixing 18 mm. thick marble partition slab with chawk doongri marble square cut, both sides polished with two front corners rounded and edges polished. 161 Supplying, fitting and fixing white vitreous china best quality approvedmake wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillarcock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nut includingmending good all damages and painting the brackets with two coats ofapproved paint.(i) 450 mm X 300 mm size 162 Supplying, fitting and fixing Orissa pattern water closet in white glazedvitreous chinaware of approved make in position complete excluding P orS trap (excluding cost of concrete for fixing).(i) 580 mm X 440 mm each 163 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification withP.V.C fitting complete, C.I. brackets including two coats of painting to bracket etc. 164 Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make withnecessary fixing materials and clamps complete.i) Polythene Flush Pipe 165 Flat back urinal (half-stallin urinal)in white vitreous china ware of approved make (CERA/HINDWARE)supplied,fitted and fixed in position with brass screw on75mmx75mmx75mm wooden block complete. (i) 635 mm X 395 mm X 420 mm each 166 Supplying ,fitting and fixing approved brand p.v.c. connector white flexible ,with both ends coupling with heavy brass C.P.nut 15mm dia.1) 450mm. long. 167 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,with PVC coupling at one end fitted with necessary clamps.600 mm long 168 Supplying, fitting and fixing Half round channel with or without outlet asrequired set in cement concrete (6:3:1) with jhama chips complete.(Payment of concrete will be paid seperately). ii) 600 mm X 150 mmb) White vitreous chinaware 169 A) Extra for itemi) Channel with outlet, stop end 170 Approved patent vent cowl I.C.I. conforming to I.S.S.a) 75 mm dia. 171 Supplying PVC water storage tank approved quality with closed top with lid (block). Multilayer. a) 1500 Litre capacity. 172 Labour for dismantling G.I pipe with fittings.(i) 15 mm 173 (ii) 20 mm 174 (iii) 25 mm 175 Refixing G.I. pipe with fittings after cleaning where necessary.(i) 15 mm 176 (ii) 20 mm 177 25 mm 178 Removing chokage in G.I. pipe including cleaning pipe.(i) 15 mm 179 (ii) 20 mm 180 25 mm 181 Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good all damages with cement concrete(4:2:1) with jhama chips and cement plaster (6:1) to match with and curing.(i) 15 mm 182 (ii) 20 mm 183 Dismantling wash basin with brackets with or without waste fittings. 184 Dismantling E.P. or Anglo-Indian W.C. 185 Dismantling urinal. 186 Dismantling pillar cock of wash basin. 187 Cleaning glazed tiles with acid 188 Mazdoor

BRR : 7770645 Refurbishment of Happy Valley Quarters, including construction of Roof Truss, Plumbing and bathroom refurbishment and electrical wiring related works under Darjeeling Division, WBSEDCL- 1 Civil WorksEarth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. 2 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation 3 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 4 Cement concrete with 30mm down graded shingles excluding shuttering. N.B. Variety. a) In ground floor (1:3:6) proportion. 5 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, as per relevant IS codes.In Ground Floor: 6 In First Floor 7 In Second Floor 8 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (ii ) River BazreeIn Ground Floor: 9 In First Floor 10 In Second Floor 11 Brick work with 1st class bricks in cement mortar(1:4). a) In foundation and plinth. 12 b) In Super structure, ground floor 13 b) In Super structure, first floor 14 b) In Super structure, second floor 15 125mm tick brick work with 1st class bricks in Cement mortar (1:4) . a)In ground floor. 16 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m(i) Tor steel/Mild SteelI. SAIL/ TATA/RINLIn Ground Floor: 17 i) 25mm to 30mm thick shuttering without staging in foundation etc.In Ground Floor: 18 M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.I) For structural members of specified sections weighing less than 22.5 Kg./mIn Ground Floor: 19 In Second Floor 20 In Third Floor 21 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.i) For roof truss worksa) Span up to 12 MtrIn Ground Floor 22 In First Floor 23 In Second Floor 24 M.S. works in framed gratings of window etc.made of round or square bars and frame work or M.S. flats (with the bars securely fixed to the flat bar frame) with or without intermediate flat bar stiffener and fixed with necessary screws etc. complete, as directed. In Ground floor. 25 In First Floor 26 In Second Floor 27 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed 28 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar20 mm thick plasterIn Ground Floor: 29 In First Floor 30 In Second Floor 31 15 mm thick plaster 32 In First Floor 33 In Second Floor 34 10 mm thick plaster 35 In First Floor 36 In Second Floor 37 (a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturers specification [Cement to be supplied by the Department] 38 Applying epoxy mortar ( 10 mm nominal thick) over leached, honey combed and spalled concrete surface and exposed steel reinforcement complete as per Technical specification 39 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m. 40 Dismantling all types of masonry excepting plain cement concrete of reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. a) In ground floor including roof 41 Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75m. In ground floor including roofa) Upto 150 mm thick. 42 Dismantling R.C. floor, beams etc including cutting rods and removing rubbish as directed within a lead of 75m including stacking steel bars. In ground floor including roof 43 Removal of rubbish, earth etc from the work site and disposed of the same beyond the compound in conformity with The Municipal Corporation rules for such disposal loading into the truckand cleaning the site in all respects as per direction of E.I.C. 44 Extra cost of labour for prefinished and premoulded Nosingto treads of steps, railing, window sill etc. 45 Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging ,curing and roughening of concrete surface complete. Area of each Granite slab > 0.6 upto 1.0 square metre.[Using cement slurry at back side of granite @ 4.4 kg/sq.m &white cement slurry for joint filling @ 1.8 kg/sq.m]In Ground Floor 46 In First Floor 47 In Second Floor 48 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.(A) FloorWith Polymerised Adhesive and Epoxy grout pointingincluding spacer- 2 mm ( When Tiles are laid over existinghard ready surface)(b) Area of each tile above 0.09 Sq.m [using adhesive 4.5 mmthick](i) Coloured decorative 49 In First Floor 50 In Second Floor 51 (A) WallWith Polymerised Adhesive and Epoxy grout pointingincluding spacer- 2 mm ( When Tiles are laid over existinghard ready surface)(b) Area of each tile above 0.09 Sq.m [using adhesive 4.5 mmthick](i) Coloured decorative 52 In First Floor 53 In Second Floor 54 Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge). 55 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothning of surface.Two Coats 56 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC.(a) One CoatIn Ground Floor: 57 In First Floor 58 In Second Floor 59 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer(Two Coat)Premium 100% Acrylic EmulsionIn Ground floor 60 In First Floor 61 In Second Floor 62 Removing old paint from blistered painted surface of steel or other metal by chipping including scraping and cleaning and exposing the original surface. 63 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc 64 Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 65 Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface :With super gloss (hi-gloss) -(iii) Two coats (with any shade except white) 66 (a) On timber or plastered surface :With super gloss (hi-gloss) -Two coats (with any shade except white) 67 Supplying, fitting & fixing single skin color coated trapezoidal profile for wall cladding, Roof shall be made of 0.45 mm BMT (Base metal Thickness) 0.50 mm TCT (Total Coated Thickness excluding paint), G550 (min 550 yield strength of Zincallume metallic coating (IS 15965) with high Solar Reflectance Index (SRI) value for better cooling as per thermatech technology, 1000-1015 mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan and the end rib shall have anti-capillary groove and return leg. The steel sheet shall be fastened with 40 micron Zinc coated or 25 micron Zinc-tin alloy coated , hex head, self-drilling screw as per IS 3566-2002 Class 3 fastener. The base steel shall be coated with Zinc-Aluminium alloy Zincalume (AZ150)(i.e. 55% Alu, 43.4% Zn, 1.6% Si) minimum of 150 GSM coating total on both sides, pre-painted with colorbond XRW (xterior roofing, walling) paint system of 35 micron Super Durable Polyster Paint (SDP)with stable inorganic pigment with no lead contents confirming IS15965, The sheet shall be free from defects and have brand marking of manufacturer giving product details on the back of the sheet at regular interval confirming genuinity of the material.(i) In roof (a) With 0.50 mm thick sheet 68 Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping)(A) 300 mm lapping each way(b) With 0.63 mm sheet 69 Supply, fitting & fixing uPVC rain gutterof approved make (Brand: Aquastar or Similar quality) having 160 mm width, outlet dia of 90mm minimum, including uPVC fittings, clamps/bent etc. as per manufacturer specification including cost of labour for fitting and fixing, tools etc. complete in all respect. 70 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps Sal : Siliguri. 71 Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.(iv) 25mm thick shutters with 12mm thick panel of size 30 to 45 cm.(c) Other Local Wood. In Ground floor 72 In First Floor 73 In Second Floor 74 Providing & fixing factory made 30 mm thick factory made solid pvc door shuttermade out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm /welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer-in-Charge. b) Factory made Single piece extruded PVC profiles door shutter of both side laminated wood grains decorative Finish: 75 Supplying, fitting & fixing factory made foam PVC (density shall not be less than 600 kg/cum) door frame (finished weight of 2.73 kg/mtr.) of size 100mm X 45mm made off with 5mm thick extruded foam PVC sheet, mitre cut at junction of horizontal and vertical member and joined them by heat welding. Entire door frame profiles to be reinforced with steel primer coated 19 SWG 40mm X 20mm M.S. tube. An additional 5mm thick PVC sheet with desired colour/shade to be provided at the exposed surface and three nos 5mm thick PVC sheet to be provided as gap insert. The door frame to be fixed with wall by using 8mm dia. and 100mm long strainless steel screws and PVC fasteners. A minimum of 4 nos. screws to be provided for each vertical member & 2 nos. for horizontal member all complete as per direction of Engineer-in-Charge. (b) Pre-laminated Colour. 76 Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)(i) 3 mm thick (weighing 7.4 kg/Sq.m) 77 Anodised aluminium barrel / tower / socket bolt (full covered) of approved manufactured from extruded section conforming to I.S. 204/74 fitted and fixed with cadmium plated screws:(iii) 100mm long x 10mm dia. bolt. 78 Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws:(iii) 75 x 45 x 2.5mm. 79 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod)(ii) 100 mm grip x 10 mm dia rod. 80 i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(b) 250mm long. 81 Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (b) 40mm X 6mm, 200mm Length 82 ii) Godrej Hydraulic door closer fitted and fixed complete. (b) Medium type 83 Door stopper (Anodised aluminium) 84 Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge.(A) In 10-12 Micron thickness Annodizing filmI) Natural whitea) 2- track sliding windowi) Bottom frame 85 ii) Top and side frame 86 b) 3- track sliding windowi) Bottom frame 87 ii) Top and side frame 88 d) Shutter for all track sliding window.i) Bottom & Top member 89 ii) Style side member 90 iii) Interlock member 91 g) Fixed glazing.i) Top, bottom and side member 92 ii) Mullion 93 iii) Glazing clip 94 h) Louvered windowi) Top, bottom and side member 95 ii) Louvered Section. 96 iii) Cleat angle ( Non-annodized) 97 Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers.i ) 2 track sliding window 98 ii ) 3 /4 track sliding window. 99 iv ) Fixed glazing 100 v ) Louvered window 101 Supplying PVC rollers for sliding windows as per direction of Engineer in charge. 102 Supplying maruti lock (100mm) 103 Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.i) For sliding windowsa) T shaped EPDM gasket for frames. 104 b) U shaped EPDM gasket for frames. 105 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.i) 4mm thick clear glass. 106 ii) 4mm thick coloured / tinted / smoke glass. 107 Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. White 108 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With P trap 109 Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C(ii) Plastic (hallow type) white 110 Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets(a) Sink only(i) 530 mm X 430 mm x 180 mm 111 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (ii) 450 mm long 112 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(i) 600 mm long 113 Supplying, fitting and fixing Waste fittings complete. (b) Polythene(i) 32 mm 114 Supplying, fitting and fixing pillar cock of approved make.a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 115 Supplying, fitting and fixing C.P. Wall Flange 116 Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding P or S trap (excluding cost of concrete for fixing).(i) 580 mm X 440 mm 117 Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(ii) 550 mm X 400 mm size 118 Constructing Inspection pit of insidemeasurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.ii) With Bazree (N.B Variety) (Other than SAIL/TATA/RINL) 119 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)a) For Exposed Work PVC Pipes15 mm 120 20 mm 121 25 mm 122 40 mm 123 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made foraccesories, specials. (b) For Concealed Work (i) CPVC Pipes Class-1,SDR-1115 mm 124 20 mm 125 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. 126 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length(b) 110 mm 127 (c) 160 mm 128 Coupler/Plain Tee (b) 110 mm 129 (c)160 mm 130 v) Plain Y (b) 110 mm 131 x) Bend 87.5º (b) 110 mm 132 (c) 160 mm 133 xv) Vent Cowl (b) 110 mm 134 xvi) Pipe Clip(b) 110 mm 135 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. (A) Above ground(ii) 110 mm dia. 136 (B) Under ground(ii) 110 mm dia. 137 (iii) 160 mm dia. 138 Taking out rain water down pipe. 139 Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 140 (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm 141 (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar 142 (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). 143 Labour for punching hole in plastic water storage tank upto 50 mm dia. 144 Supply of Chlorinated Polyvinyl Chloride (CPVC) pipes& fittings conforming to IS-15778: 2007Ball Valve15 mm 145 Ball Valve20 mm 146 Ball Valve25 mm 147 Ball Valve32 mm 148 Ball Valve40 mm 149 Electrical WorksRemoval and opening of old and damaged wiring at the staff quarter and Divisional Office premises and making the surface ready for new wiring where required. 150 Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface]Average run 6 mtr 151 Average run 9 mtr 152 Average run 12 mtr 153 Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. with S & F 6A 5 pin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface]On Board 154 Average run 4.5 mtr 155 Wiring in 1.1 KV grade single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) 156 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) 157 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) 158 Supplying and fixing PVC casing-capping [Precision Make] on wall or ceiling, incl. necy. PVC fittings etc. and mending good damages to building works.20x10mm Size 159 25x10mm Size 160 Supply & Fixing 240 V 16 A Piano key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required 161 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 162 Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. 163 Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required 164 Supply, delivery Fixingtwin LED tube light(2X18/20)W(suspended bellow Fan level or extra the ceiling) with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10mt. length. (Make- phillips, Havells, Bajaj) 165 Supply, delivery Fixingsingle LED tube light(18/20)W fitting complete with all accessories directly on wall/ceiling with HW block and ceiling plates, nipples etc. as required (Make- phillips/ Havells/ Bajaj) 166 Supply and delivery of 2 x 2 LED Commercial Light 28W to 36W with all necessary fittings (Philips/Havells/Crompton/Bajaj) 167 Supplying Exhaust fan (300mm).Havells Ventilator DB Neo 168 Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 Cm or (12) 169 Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building worksa) 4 Module 170 b) 6 Module 171 c) 8 Module 172 d) 12 Module 173 Supplying & Fixing GI Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building worksa) 2 Module 174 Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachmenta) 4 way 175 b) 8 Way 176 Supply & Fixing 240/415V, 63 A, TPN MCB OF Breaking Capacity 10 KA & C characterstic on din rail of exsting DB & necessary connection(Legrand) 177 Supplying and fixing Sheet steel Main Switches on angle iron frame on wall [60/63 A] 178 Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [2 + 8 Way] 179 Supply & Fixing 240/415V, 6-32 A, SP MCB OF Breaking Capacity 10 KA & C characterstic on din rail of exsting DB & necessary connection(Legrand) 180 Earthing with Copper plate (610x610x3mm size) having weight of 9.84 Kg and 1 No. 25x5mm Copper strip (3.20 mt long) & 1 no. 6 sqmm PVC insulated stranded Copper wire (4 Mt long) incl. S & F 15 mm dia GI pipe (ISI-Medium) protection (4 mt. long) to be fillied with bitumen, partly under the ground level & partly above ground level to an average depth of 3.65 Mts. below the ground level and restoring the surface duly rammed incl. providing 3.0 mt long, 25 mm dia GI pipe (ISI-Medium) for periodic treatment, incl. providing masonery enclosure on the top of the earth electrode of overall size 86.36x86.36x46cm deep(below Ground level) complete with cemented brick work (1:6) of 25 cm width, duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56x35.56cm with locking arrangement, GI reducer and treatment of soil by using salt & charcoal or coke for plate electrode 181 Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required 182 Connecting the equipment to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages (a) Stranded GI wire(i) 7/16 SWG 183 Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board 184 Suplying, Fabrication, installation and commissioning of outdoor type feeder pillar box (Main Panel Board) with MS angle/flat iron and MS Plate frame with water proofing enclose mounted on ground in CC foundations (1:3:6) and providing anti corrosive painting, including supplying and fixing of the following itemsa) Indication Lampb) Main Switchesc) Ammeterd) Voltmetere) Fusesf) Other Necessary items as required

BRR : 8256413 Tender For Strengthening And Upgredation Of Krishi Vigyan Kendra, Bichpuri In District- Agra (U.P.), 1 FARMER HOSTEL Excavation in foundation in ordinary soil incl. lift up to 1.5M and lead upto 30m and incl. filling, watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trenches or into the plinth and removal & disposa of surplusearth as directed by the Engineer incharge. 2 Filling of carted earth Lead upto 15 Km Distance 3 Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing labour T & P etc. required for proper completion of work. Sapling of girth upto 30cms. measured at a height of 1.5 M). 4 Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. 5 Antitermite treatment of soil under floors using chemical emulsion @ one litre per hole, 300 mm apart @ 100 Nos Holes per 9.00 Sqm. including drilling 12 mm diameter holes and plugging also to match the floor properly :With Chlorpyriphos / Lindane E.C. 20% with 1 % concentration. 6 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) in lintel beamsGround Floor 7 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) in lintel beamsFirst Floor 8 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) in lintel beamsTerrace Floor 9 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) for slabs Ground Floor 10 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) for slabs First Floor 11 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) for slabs Terrace Floor 12 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) for theplinth& slab beams. Ground Floor 13 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) for theplinth& slab beams. First Floor 14 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) for theplinth& slab beams. Terrace Floor 15 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) inR.C.C.foundation and footingwithapproved stone ballast. 16 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) in R.C.C. columns Ground Floor 17 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) in R.C.C. columns First Floor 18 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) in R.C.C. columns Terrace Floor 19 First class brick work in 1:6 cement and coarse sand mortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. 20 Providing & aplying a coat of residual petroleum bitumin of grade VG 10 of approved quality using 1.7 kg per SqM on DPC after cleaning the surface with brushes and finally with piece of cloth lightly soaked in kerosine oil. 21 First class brick work in 1:6 cement and coarse sand mortar in super-structureincludingnecessarycutting and moulding of brick work asrequired thickness of wall more than 12cms. (1:6 cement : coarse sand)Ground Floor 22 First class brick work in 1:6 cement and coarse sand mortar in super-structureincludingnecessarycutting and moulding of brick work asrequired thickness of wall more than 12cms. (1:6 cement : coarse sand)First Floor 23 First class brick work in 1:6 cement and coarse sand mortar in super-structureincludingnecessarycutting and moulding of brick work asrequired thickness of wall more than 12cms. (1:6 cement : coarse sand)Terrace Floor 24 First class brick work in 1:4 cement and coarse sand mortarin1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.Ground Floor 25 First class brick work in 1:4 cement and coarse sand mortarin1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work.First Floor 26 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Ground Floor 27 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. First Floor 28 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. Terrace Floor 29 15mm Cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. Ground Floor 30 15mm Cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. First Floor 31 15mm Cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. Terrace Floor 32 12mm Cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. Ground Floor 33 12mm Cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. First Floor 34 12mm Cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. Terrace Floor 35 Making grooves 10 to 12 X 12mm and upto 25 X 15 mm deep in plaster of the walls or in ceiling vertically or horizontally as required. 36 Providing and laying Ceramic glazed floor & wall tiles tiles (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 37 Cement concrete flooring 1:2:4 (1 cement : 2 coars sand : 4 graded stone of size 20mm nominal size) laid in one layer finished with floating coat of neat cement (40mm thick floor) For plinth protection 38 Providing and fixing of glass strip of 4mm thick in joints of floor and skirting at the time to laying including labour T & P etc complete in all respect. (b) of 40mm depth. 39 Marble stone flooring with 20mm marble stone as per sample of marble approved by Engineer-in-charge, over 20mm (average) base of cement mortar of 1:4 (1 cement : 4 coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete with: white albetta white stoneGround Floor 40 Marble stone flooring with 20mm marble stone as per sample of marble approved by Engineer-in-charge, over 20mm (average) base of cement mortar of 1:4 (1 cement : 4 coarse sand) laid and jointed with gray cement slurry including rubbing and polishing complete with: white albetta white stoneFirst Floor 41 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel butt hinges with necessary screws, steel handles, sliding bolt, door stoper & tower bolt. 35 mm thick 42 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel butt hinges with necessary screws, steel handles, sliding bolt, door stoper & tower bolt. 35mm thickDouble leaf 43 Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of hold fast for chaukhatsof doors and windows. 44 Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Providing & fixing of door / windows grill. 45 Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Z-Section steel windows (openable) 46 Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. (when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. Angle iron door chaukhat 40*40*5 47 Providing and fixing fly proof wire gauge to windows and clerestory windows & doors with MS flat 15*3mm and nuts bolts complete. 48 Fixing of Door, windows/ventilators chaukhats in position.Door chaukhats 49 Fixing of Door, windows/ventilators chaukhats in position.Window chaukhat 50 Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface)Ground Floor 51 Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface)First Floor 52 Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface)Terrace Floor 53 Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 1.67 Ltr/10 sqm including one coat of primer applid @ 2.2 Ltr/10 sqm coat curing and cost of all material, labour, T & P etc. required for proper completion of work for two coat. Ground Floor 54 Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 1.67 Ltr/10 sqm including one coat of primer applid @ 2.2 Ltr/10 sqm coat curing and cost of all material, labour, T & P etc. required for proper completion of work for two coat. First Floor 55 Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 1.67 Ltr/10 sqm including one coat of primer applid @ 2.2 Ltr/10 sqm coat curing and cost of all material, labour, T & P etc. required for proper completion of work for two coat. Terrace Floor 56 Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Ceiling)Ground Floor 57 Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Ceiling)First Floor 58 Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Ceiling)Terrace Floor 59 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 60 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth ofapproved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. 61 Painting with synthetic enamal paint of approved brand and manufacturer of required color to give an even shade: two or more coats on new work over and undercoat of suitable shade of ordinary paint of approved brand & manufacturer. The item shall also include applying priming coat with ready mixed red oxide zinc chromate primer of approved brand & manufacturer. 62 Painting with synthetic enamal paint of approved brand and manufacturer of required color to give an even shade: two or more coats on new work over and undercoat of suitable shade of ordinary paint of approved brand & manufacturer. The item shall also include applying priming coat with ready mixed red oxide zinc chromate primer of approved brand & manufacturer. but on new wood surface. 63 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. 64 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with water proofing cement compound @ 0.253 Kg/Sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with water proofing cement compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 65 Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrsPVC low level flushing cistern with fittings & brackets 40mm dia C.P. flushpipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required.Orissa Pattern W.C. pan of size580x 440mwith integral type foot rests flush pipe and over flow arrangement. 66 Providing & fixing white vitereous china water closet squatting pan ISI marked (Indian type W.C. pan) with 100mm sand cast iron P or S trap, 10/12.5 litrsPVC low level flushing cistern with fittings & brackets 40mm dia C.P. flushpipe with fitting & clamps, 20mm over flow pipe with specials and mosquito proof coupling of approved municipal design, painting wherever required including cutting & making good the walls & floors where required. Europion type W.C. pan with black plastic seat and lid Make, Cera, Hidustan 67 Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mmC.P. brass waste of standard pattern including cutting & making good the walls wherever required.Flat back wash Basin size 630x450 mm with single 15mm C.P. brass pillar tap. 68 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32mm dia 69 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.40mm dia 70 Providing and fixing 1500x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 71 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm 72 Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge.15mm Nominal bore 73 Providing & fixing PTMT towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour. 600 mm. long towl rail length of 645 mm. width 78 mm. and effective height of 88 mm, weighing Not less than 190 gms. 74 Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing Not less than 105 gms 75 Providing and fixing PVC pipe Conforming to IS make Working Pressure 6 Kg/sqcm including testing labour T&P and all Complete fitting.110mm diameter 76 Providing and fixing PVC pipe Conforming to IS make Working Pressure 6 Kg/sqcm including testing labour T&P and all Complete fitting.140mm diameter 77 Providing and fixing PVC Plane band of required degree 110mm diameter 78 Providing and fixing PVC Plane band of required degree 140mm diameter 79 Providing and fixing PVC Tee 110mm diameter 80 Providing and fixing PVC Tee 140mm diameter 81 Providing and fixing PVC Nahani trap for self cleaning design with screwed down on highed grating with or without bend arm complete 82 Construction of main Hole cover of internal size of 900x800x450mm complete fitting 83 Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.Exposed of wall20mm dia Nos.minal bore (medium duty) 84 Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.Exposed of wall25mm dia Nos.minal bore (medium duty) 85 Providing & fixing CPVC pipes complete with CPVC fittings & clamps including cutting & making good the walls etc.Exposed of wall32mm dia Nos.minal bore (medium duty) 86 Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.15mm Nos.minal bore 87 Providing & fixing CP brass short body of approved quality conforming to IS 8931 15mm Nos.minal bore 88 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing Nos.t less than 690 gms.15mm Nos.minal bore 89 Providing and fixing gun metal gate valve with wheel of approved quality.25mm dia Nos.minal bore 90 Providing and fixing gun metal gate valve with wheel of approved quality.32mm dia Nos.minal bore 91 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893115mm Nos.minal bore 92 Providing and fixing 15mm C.P Brass elvo of approved make and quality as per direction of engineer-in-charge 93 Providing and fixing C.P Brass extension nipple (size of 15mm to 50mm) of approved make and quality as per direction of engineer-in-charge 94 Providing and fixing C.p Brass stop cock of standard design of approved quality 95 Providing and fixing C.P brass shower of approved quality 96 Providing and fixing ball valve (brass) of approved quality15mm Nominal size 97 Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 98 Providing and fixing 50 Ltr ElectricGeyser 99 Wiring points for light with 1.5 Sqmm.FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit with 1.5 Sqmm FRPVC insulated copper conductor cable as earth wire drawn inside light paintswith modular Box and cover plate 100 Wiring point for two way light 1.5 Sqmm FRPVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5Sqmm FRPVC insulated multistrand copper conductor cable as earth wire drawn inside 2 way light paint with modular Box and plate 101 Wiring point for fan / fresh air fan (light duct exhust) with 1.5 Sqmm FRPVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5Sqmm FRPVC insulated multistrand copper conductor cable as earth wire drawn inside 2 way light paint with modular Box and plate 102 Wiring point for plug with 1.5 Sqmm FRPVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earth with drawn , modular type switch & socket complete in all request with modular Box and cover plate 103 Wiring point for call ball with Wiring point for plug with 1.5 Sqmm FRPVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earth with drawn , modular Box and cover platecomplete in all request with modular Box and cover plate 104 Wiring point for H.P.M.Y. Sodium vapour lamp with 1.5 Sqmm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 Sqmm FRLSH PVC insulated Multistrand copper conductor cable as earth wire drawn inside the conduct 15 Amp modular type switch etc. complete in all respects with modular Box and cover plate 105 Supply & wiring of submains with two number 4 Sqmm FRLSH PVC insulated 1100 volt grade multistrand single core copper conductor cable in 20 mm dia. Havy duty (2mm thick) PVC conduct with one Nos.. 2.5 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earth continuty wire drawn in conduit complete all respect. 106 Supply & wiring of submains with two number 6 Sqmm FRLSH PVC insulated 1100 volt grade multistrand single core copper conductor cable in 25 mm dia. Havy duty (2mm thick) PVC conduct with one Nos.. 4 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earth continuty wire drawn in conduit complete all respect. 107 Supply & wiring of submains with four number 10 Sqmm FRLSH PVC insulated 1100 volt grade multistrand single core copper conductor cable in 25 mm dia. Havy duty (2mm thick) PVC conduct with two Nos.. 6 Sqmm FRLSH PVC insulated multistrand copper conductor cable as earth continuty wire drawn in conduit complete all respect. 108 Supply and laying of aluminium conductor PVC armoured served sheathed cables 1100 volts grade at a depth of 750mm below ground lecel over a cushion of 75mm . Thick sand all around and protected with brunt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-incharge , complete in all respect . the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 35 sq.mm 3-1/2 core 109 Supply and laying of 25mmX3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. 110 Supply and burring of safe Earthing electrode T-19 (hot dip galvanized) length up to 3000mm , outer pipe 50mm , inner pipe 25, terminal Dia 12mm , outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 20 x 3 G.I.strip , up to switch board (from apron to switch board , the cost of G.I. stip will be extra ) along with 30 cm square C.I. frame with hinged cover & masonry housing . 111 Supply and Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting , M.S channel Base with bottom and top cable entreis Electrical control panel with TPN MCCBS (four pole 36 KA with thermal magnatic release ) Switches complete and instrument chamber etc. complete in all respect.Incoming. 200 Amp. MCCB-1 Nos.Outgoing 100 Amp. MCCB-2 Nos.. 112 Supply and fixing 6 Amp. To 32 Amp. SPMCB (10KA) 113 Supply and fixing 50Amp. To 63Amp. SPMCB (10KA) 114 Supply and fixing 40 Amp. DP MCB (10KA) Cat -B ( For light D B) 115 Supply and fixing 80 Amp. To 100 Amp. 4 Pole MCCB (16KA) Thermal Magnetic release 116 Supply and fixing Surface /flush mounting 12 ways SPN distribution board with additional MCB complete in all respect as directed at site by engineer - incharge . 117 Supply and fixing Surface /flush mounting 4 ways SPN distribution board with additional MCB complete in all respect as directed at site by engineer - incharge . 118 Supply and fixing of call bell of approved make on polished MDFEG / Teak ply board including making connections etc. complete in all respect. 119 Erection and testing of ceilling fan and regulator etc. excluding supply of down rod, complete in all respect. 120 Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts , nuts and washers etc. complete in all respect. 121 Supply and fixing of 16 gauge M.S. drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect . 122 Supply and fixing of power plug with 20Amp. /250Volt flush type modular switch and 5 pin 20A/250V flush type universal modular socket switch on concealed M.S. box including supply of all material , labour T&P etc. required for proper completion of work. 123 Supply and fiixing hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWG MS Sheet incorporating 10mm dia M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material , labour . T&P etc. required for proper completion of the work . 124 Supply and fixing of electronic fan regulator (modular) 120-280 V. ISI marked , on the existing switch board including making connections , required material, labour T&P etc. for proper completion of work to the satisfaction of engineer in charge of work 125 Supply and wiring of submain with two number 1.5 sq. mm FR PVC inculated 1100 V grade multistrand single core copper conductor cable in 20mm dia heavy duty (2mm thick) PVC conduit with 1 Nos. 1.5 sq.mm FR PVC insulated 1100 V grade multistrand single core copper cunductor cable as earth continuity wire drawn inside the conduit complete in all respect . 126 Supply and fixing of LED tube light with better suitable for up to 22 watt LED tube light fitting including tube on surface complete in all respect . 127 Supply and fixing of LED Street light fitting having die cast aluminium body and diffuser/ Reflector with driver set suitable for 65 watt. Confirming to IP66 Protection complete in all respect. 128 Supply and fixing of 100 Amp. Four pole change over switch on 40mm X40mm X6mm angle iron frame , including the cost of labour , T&P , painted and other material required for proper completion of the work as per direction and satisfaction of engineer in charge. 129 Supply and fixing of fan sheet of backelite. 130 Supply and fixing of ceilling fan ISI marked 1200mm sweep. 131 Supply and fixing LED Bulb 20 watt. 132 Supply and fixing of exhaust fan 12 dia 133 Supply and fixing of cable Gland AI lugs etc. 134 providing and fixing of single twin bed6-0length and2-6 wide. Bed is made of 19mm thk. Boardfinished with mica, laminates along with one side tables of size 1-6 X 1-0 X 1-6finished with mica or laminates on both sides 135 providing and fixing of 6-0 wide and 6-0 length and 1-6height Guest Bed, made of board and finished with mica , laminates, with upholstered 4-0 ht head board. Two side tables of size 1-6 X 1-6 X 1-6 made of board fixed along the both sides of bed, finished with mica or laminates on both sides drawer fixed with channel and handle and open shelves below 136 providing and fixing of 2-6 wide and 7-0 hightwardrobe with 2-0 depth.wardrobe made up of laminated board with openable shutters finished with laminates, mica pasted on all sideswith handle, and locks on shutter and all drawers inside and shutters fixed with hinges . 137 providing and fixing of tv cabinets 1- 0 deep and6-0 length. Made of laminated board finihsed with mica and laminates placed with 3/4 groove wih 6 deep drawers mica pasted on all sidesfixed with s.s 10 channel and handle and lock above it, along with the open shelves. 138 providing and fixing of 10 seater dinning table as perdesign made of board and vinner with natural polishh above it . And dining chairs made of wood with ploished finished and upholstered in good quality fabric , foam of high densityat the back and sitting. 139 Provind and fixing of chairs in guest bedroom made of wood and vineer with natural ploish on it. Finihsed with the upholstered finish at back and sitting along with side table 140 Providing and fixing of Table in Office in 6-0 length and 2-6 wide finished with vineer / laminates / glass having 3 drawers on one side andone cupboard on the other side made of 19.00 mm board with 1.0 mm vineer / laminates pasted on all sides , lock on all drawers and all cupboards. vineer / laminates pasted on both sides external & internal, foot rest with table. 141 Providing and fixing of Office chair revolving with moulded foam seat with P.U. arms and P.U. base, with twin wheel casters upholstered in good quality cloth. foam of high density 142 Providing and fixing of staff Table made of 19.00 mm board with laminate 1.0 mm both sides and front size (4-0 X 2-6) withh 6 deep one drawers mica pasted on all sidesfixed with s.s 10 channel and handle and lock above it, along with the open shelves for keyboard. 143 Providing and fixing of StaffChair with arms, revolving and P.U. base with twin wheel, casters, upholstered in good quality cloth,foam of high density 144 providing and fixing of 12 Seater Conference table as perdesign made of board and vinner with natural polishh above it . And chairs madewith arms, revolving and P.U. base with twin wheel, casters, upholstered in good quality cloth,foam of high densityat the back and sitting. 145 Providing and fixing of Air Conditioing in guest bedroom and office area including copper & drainage pipes. 146 WIRE FANCINGExcavation in foundation in ordinary soil incl. lift up to 1.5M and lead upto 30m and incl. filling, watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trenches or into the plinth and removal & disposa of surplusearth as directed by the Engineer incharge. 147 Providing and laying cement concrete in 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregte 40mm nominal size ) and curing complete .including cost of form work. In Foundation and floors . 148 Providing and laying cement concrete in 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregte 20mm nominal size ) and curing complete .including cost of form work. In Foundation and floors . 149 R.C.C. Standards post/ struts/rails/ pales of mix 1:1.5:3 (1 cement : 1.5 coarsesand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-incharge (cost of earth works in excavation, concrete works in foundation to be paid separately). 150 Supplying and fixing turn buckles and straining bolts for barbed wire fencing. 151 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :- Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire. 152 Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 1.67 Ltr/10 sqm including one coat of primer applid @ 2.2 Ltr/10 sqm coat curing and cost of all material, labour, T & P etc. required for proper completion of work for two coat. 153 Cleaning jungle including uprooting of trunks, vegetation, grass, bushes, wood trees and saling of girth upto 30cm measured at a height 1 metre above ground level and removal of rubbish upto a distance of 50 metre outside the periphery of area cleared. 154 UNDER GROUND IRRIGATIONPIPE LINE Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia 155 Providing and fixing 140mm PVC pipe conforming to IS make working pressure 6kg/sqcm including testing labour T&P and all complete fittings . 156 Providing and fixing 140mm Flench with complete fitting with nut , bolt etc. 157 Hi-TECH NURSURYEstablishment of Hi-tech Poly house (44x24=1056sqm) for producing vegetable/fruits planting material for farmers. 158 Shade Net House 40x25=1000 sq mt with all amenities and fixtures. 159 Establishment of HYV Mother plants of fruits crops ( Kinnow, lemon, guava,ber,beal etc.) in 1 acre land at KVK Farm 160 Tools : Tractor mounted 500lts Spray tank HTP power sprayer with 100mts high pressure pipe & spray nozzle 161 Tools : Tractor mounted detachable Augar of 3 feet in length & 1.5 feet in width for orchard/tree plantation in the district. 162 CAMPUS ROADExcavation in foundation in ordinary soil incl. lift up to 1.5M and lead upto 30m and incl. filling, watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trenches or into the plinth and removal & disposa of surplusearth as directed by the Engineer incharge. 163 Earth work in filling orfinary Soil (Loam,Clay or sand ) including lift up to 1.50M and lead up to 30M and including filling watering and ramming of excavated earth into the tranches or into the space between the building and the sides of foundation trenches of into the plinth and removal and disposal of surplus earth as directed by the engineer- in - charge up to a distance of 30 M from the foundation tranches . including royalty. 164 Providing and laying in position cement concrete of Specified grade 1:3:6 (1 cement : 3 coarse sand :6 Graded stone aggregate 40 mm nominal size),including the cost of centering, shuttering, finishing. 165 Construction of un-reinforced, plain concrete cement avement thicknessas per design, over a prepared sub base with 43 grade cement or any other typeas pr clause 1501.2.2 M-30 (Grade), course and fine aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film wedges , steel plates including levelling theformwork as per drawing ), spresding the concrete with shvels, rakes, compacted using needle , screed and plate vibrators and finished in continous operation including provision of contraction, expansion, constructionand constructional joints, appliying debonding strips, primer, sealant, dowel bars, near approches to bridge/culvert and construction joints, admixtureas approved, curing of concrete slabs for 14 days, curing compund (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501. 166 Class -150 (Non Modular ) brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials , labour and T&P etc. required for proper completion of the work . 167 Providing and laying GSB with graded stone ballast with stone grit size stone ballast with hand ramming watering including all material labour T&P etc. all complete 168 Supply & Laying of precast concrete Blocks (Interlocking tiles) for paving of thickness 60mm to 100mm (Compressive strength not less then 30Mpa as specified in IS:15658) Including 25mm thick local sand base levelling and dressing of surface to required level and slope , filling joints with local sand all complete work as specified in IS 15658:2006 80mm (Rubber molded Grey ). 169 Providing and laying cement concrete in 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregte 20mm nominal size) and curing complete including cost of form work. In Foundation and Floors. 170 15mm cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angels chamfers, and rounded angels not exceeding 80mm in girth and finished even and smmot. 171 SEPTIC TANKExcavation in foundation in ordinary soil incl. lift up to 1.5M and lead upto 30m and incl. filling, watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trenches or into the plinth and removal & disposa of surplusearth as directed by the Engineer incharge. 172 Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. 173 First class brick work in 1:6 cement and coarse sand mortar infoundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work. 174 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 12.5mm nominal size) 175 Reinforced cement concrete in beams, suspended floors, roofs having balconies, shelves, chajjas, bands, staircase and spiral staircase above plinth level upto floor five level including the cost of centering, shuttering, and excluding the cost of reinforcement with 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone) in lintel beams 176 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 177 12mm Cement plaster with cement mortar in proportion of 1:6 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. any additive. (1) 1 cement : 6 fine sand. 178 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 179 G.S.T Extra as per applicable

BRR : 9376249 Tender For Providing Special Repair Work For Kumar Vidya Mandir Kurundwad No.1 Tal-Shirol= Removing the tar or coba and disposing of the materials as directed, excetra complete. (For First Floor)Item / Page No : 8 / 206Additional Specifications : The work shall be carried out as per instructions of Engineer in charge. 2 Providing and laying cast in situ / Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks,laying / pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing, excetra complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (For Ground Floor) (using NATURAL SAND).Item / Page No : 70 / 182Specification No : Bd.F.8,B-7Spec. Page No : 302-303,38-40Additional Specifications : 1. With additional specifications for controlled concrete.2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable. 3 Providing and fixing in position thermo mechnically treated FE-500 steel bar reinforcement of various dias for reinforced cement concrete pile caps, footings, foundations, slabs, beams, columns, canopies, staircases, newels, chajjas, lintels, pardis, copings, fins, arches, excetra as per detailed designs, drawings and schedules including cutting, bendding, hooking the bars, binding with wires or tack welding and supporting as requied complete. (For Ground Floor)Item / Page No : 33 / 188Specification No : Bd.F.17Spec. Page No : 306 4 Removing the tiles, battens, dungry cloth, purlins, rafters, ridges excetra from roof, sorting out the serviceable and unserviceable materials and stacking the same as and where directed in the compound, scaffolding, excetra complete. (For Ground Floor)Item / Page No : 25 / 235Additional Specifications : The work shall be done as per instructions of Engineer in charge. 5 For First FloorItem / Page No : 25 / 235Specification No : As per Item No 4aSpec. Page No : ---Additional Specifications : As per Item No 4a 6 Providing and fixing unplasticised polyvinyl chloride roof made up of three layers roofing material of thickness 2 milimetre having width of 1130 milimetre and of required length having tensile strength not less than 330 kilogram per square centimetre, including fastening with self drilling screw having washers made of stainless steel, excetra complete. (For Ground Floor)Item / Page No : 37 / 237Additional Specifications : The work shall be done as per instructions of Engineer in charge. 7 For First FloorItem / Page No : 37 / 237Specification No : As per Item No 5aSpec. Page No : ---Additional Specifications : As per Item No 5a 8 Providing and fixing polyvinyl chloride coloured ridge tiles over unplasticised polyvinyl chloride roofing where required having size 113 centimetre X 41 centimetre and height 9.5 centimetre for ridge including fastening with self drilling screw having washers made of stainless steel, excetra complete. (For Ground Floor)Item / Page No : 38 / 237Additional Specifications : The work shall be done as per instructions of Engineer in charge. 9 Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates, excetra as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted / bolted / welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. (For Ground Floor)Item / Page No : 11 / 174Additional Specifications : Work shall be carried out as per the instructions of Engineer In-Charge. 10 For First FloorItem / Page No : 11 / 174Specification No : As per Item No 7aSpec. Page No : ---Additional Specifications : As per Item No 7a 11 Providing and laying Cast in situ / ready Mix cement concrete in M-20 of trap / granite / quartzite / gneiss metal for plain or moulded sills, cornice, jambs, block in course or architraves of required size and shapes including steel centering, formwork,laying/ pumping,compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing, excetra complete. The cement mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin excetra (Wooden centering will not be allowed.) with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (using NATURAL SAND).Item / Page No : 15 / 177Specification No : Bd.E.5Spec. Page No : 290-291Additional Specifications : 1. With additional specifications for controlled concrete.2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable. 12 Providing and laying vitrified matt finish tiles of having size 590 milimetre to 605 milimetre X to 605 milimetre of 8 milimetre to 10 milimetre thickness and confirming to Indian Standard 15622-2006 (Group BIa) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning, excetra complete. (For Ground Floor) (using ARTIFICIAL SAND).Item / Page No : 42 / 217Specification No : Bd.M.12Spec. Page No : 385Additional Specifications : If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable. 13 For First FloorItem / Page No : 42 / 217Specification No : As per Item No 9aSpec. Page No : ---Additional Specifications : As per Item No 9a 14 Providing structural steel work in single stanchions composed of rolled steel joists, channel, excetra with caps, bases, mild steel plates, angle brackets, cleats, gusset plates, anchor bolts, excetra as per detailed desings and drawings or as directed including cutting, fabrication, hoisting, erecting, fixing in position, making rivetted / bolted / welded connection and one coat of anticorosive paint and over it two coats of oil painting of approved quality and shade, excetra complete. (For Ground Floor)Item / Page No : 3 / 173Specification No : Bd.C.6Spec. Page No : 277 15 Providing and applying white wash in two coats on old / new plastered or masonry surfaces and asbetos cement sheets including scaffolding and preparing the surface by brushing and brooming down, excetra complete. (For Ground Floor)Item / Page No : 3 / 227Specification No : Bd.P.1Spec. Page No : 411 16 Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below - Scrapping for surface with emery paper and wipe clean for area. Applying wall primer with brush by adding mineral turpentine oil by 8 to 10 percent or water by 15 to 20 percent allowing to dry for 6 to 8 hours. After applying approved make acrylic wall putty with appropriate proportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean. Applying paints Royale Luxury emulsion first coat with brush water content water 40 to 45 percent or 65 to 70 percent by role. Applying paints Royale luxury emulsion second coat with brush with water content 40 to 45 percent or 65 to 70 percent by roller. (With prior approval of S.E.) (For Ground Floor)Item / Page No : 21 / 229Additional Specifications : The work shall be done as per instructions of Engineer in charge. 17 Providing and applying two coats of lead / zinc base oil paint / bituminious paint of approved colour and shade to new wood work and fiber boards including preparing the surface, knotting, scaffolding if necessary, excluding primer coat, excetra complete. (For Ground Floor)Item / Page No : 1 / 223Specification No : Bd.O.1Spec. Page No : 403 18 Providing and fixing heavy duty inter locking concrete coloured paving blocks of 80 milimetre thickness of having a strength of 300 kilogramme per square centimetre of approved quality and shape on a bed of crushed sand of 25 milimetre to 30 milimetre thick including striking joints and cleaning, excetra complete.Item / Page No : 52 / 218Additional Specifications : The work shall be carried out as per instructions of Engineer in charge. 19 Providing and laying in situ/Ready Mix cement concrete M-15 of trap metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions, excetra including bailling out water, formwork, cover blocks, compaction, curing and roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel), excetra complete, with fully automatic micro processor based Programmable Logic Controller with Supervisory Control and Data Aquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) excetra complete. With natural sand/V.S.I. quality Artificial Sand (using NATURAL SAND).Item / Page No : 11A / 178Specification No : Bd.F.3,B-7Spec. Page No : 298,38-40Additional Specifications : 1. With additional specifications for controlled concrete.2. If artificial / VSI crushed sand is used instead of natural sand; terms, conditions and specifications mentioned in Circular by Chief Engineer, Public Works Region, Pune bearing No CEP/D-2/Buildings-2/5940/2017 dated 17/10/2017 and Annexure-I attached to it and also Circular by Chief Engineer, Public Works Region, Nagpur bearing No 36 dated 15/01/2019 and Annexure-I attached to it will be appicable. 20 Providing and fixing 900 milimetre high, stainless steel 304 grade stainless steel railing with 40 milimetre diameter and 1.5 milimetre thick at top, 40 milimetre diameter and 1.5 milimetre thick verticle supports spaced at 1.5 metre center to center and 8 milimetre thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe, excetra complete. (For Ground Floor)Item / Page No : 7 / 264Additional Specifications : The work shall be done as per instructions of Engineer in charge. 21 Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 milimetre X 9 milimetre X 3 milimetre minimum size, crossings of mild steel flats of size 18 milimetre X 5 milimetre T or E section for runner of minimum 40 milimetre X 6 milimetre size for flange, mild steel flat for top runner of minimum size 40 milimetre X 12 milimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 milimetre, maximum spacing of vertical channels be 100 milimetre enclosed gate position and clear space of 150 milimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting, excetra complete. (Indian Standard : 10521-1983). (For Ground Floor)Item / Page No : 26 / 249Specification No : Bd.T.57Spec. Page No : 511 22 Laboratory testing charges for various materials required for items of work, on the basis of testing frequency and charges fixed by Vigilence and Quality Control Circle, Pune.Item / Page No : 4 / 0Additional Specifications : 1. The amount of laboratory testing charges will be paid to contractor only after submission of the original receipt from the Vigillence and Quality Control Office with the name of work mensioned on it.2. Above / below percentage quoted by the contractor will not be applicable for this item. 23 Providing and fixing 90 centimetre X 60 centimetre granite name plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete.Item / Page No : 12 / 294Specification No : Bd.W.7Spec. Page No : 586-587 24 INSURANCENon-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge. 25 G S TNon-Dsr ItemAdditional Specifications : The work shall be carried out as per the instructions of Engineer in-charge.