BRR : 8648630 Integrated Development Of Craft Center At Sambalpur- 1 Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 2 Additional cost for Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 3 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 4 Supplying and filling the Foundation & Plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. 5 Providing & laying cement concrete of prop. (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 100 mm thick, hoisting, lowering, laying, watering and curing etc. complete to the required levels including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer-in-charge. 6 R.C.C. work ofM-25 for foundation having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 7 R.C.C. work ofM-25 for plinth beam having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 8 R.C.C. work ofM-25 for beam & column having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 9 Ground Floor 10 R.C.C. work ofM-25 for lintel having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 11 Ground Floor 12 R.C.C. work ofM-25 for roof slab having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 13 Ground Floor 14 R.C.C. work ofM-25 for slope roof having minimum compressive strength of 250kg./cm2 in 15cm cubes at 28 days and in accordance with I.S. 456 and I.S. 516 using crusher broken hard black granite chips of approved quality & from approved quarry including hoisting, lowering, laying and compacting concrete with vibrator, watering and curing for 28 days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work complete in all respects as per drawing, design and direction of Engineer-in-charge but excluding cost of M.S. rod/Tor steel and binding wires and labour charges for bending, binding and tying the grills. 15 Ground Floor 16 Providing & fixing TOR Fe-500 D grade reinforcement bars of approved makes as per DTCN for RCC work of required diameter with straightening, cutting, bending, binding welding and joining (if necessary) and tying the grills and placing in position as required for R.C.C. work and providing fan hooks, hoisting, lowering and laying including cost, conveyance and taxes of tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all heights as per the drawing, design and direction ofEngineer-in-charge. (Linear measurements will be taken & quantity will be calculated on standard weight. Weight of binding wire will not be considered for measurement.) 17 Ground Floor 18 Brick work in foundation and plinth with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 19 Brick work in superstructure with flyash bricks in cement mortar (1:6) with best quality bricks having crushing strength not less than 75 Kg/cm2 immersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 20 Ground Floor 21 Brick work in superstructure with flyash bricks in cement mortar (1:4) with best quality bricks having crushing strength not less than 75 Kg/cm2 imersing the bricks in water for not less than 6 hours before use (the bricks shall be well burnt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck) includes molding, chamfering, corbelling .complete as per drawing, design and specification, watering and curing for 7days including cost, conveyance, royalty and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. 22 Ground Floor 23 Providing vitrified tile flooring using double charged vitrified tiles of premium grade having thick of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured /printed series (homogeneous) of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. 24 Ground Floor 25 Supplying, fitting and fixing of double charged vitrified tiles in skirting of premium grade having thickness of 8mm to 10mm conforming to IS 13756 of 600mmx600mm coloured /printed series (homogeneous) of approved quality, colour of approved quality and size in dadoes in all floors at all heights and riser of steps on 12mmm thick cement plaster (1:3) using screened and washed sharp sand for mortar with grouted Epoxy grout to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, curing-sundries and T&P, etc. required for the work complete as per specification and direction of Engineer-in-charge. 26 Ground Floor 27 Providingtile flooringexterior gradevitrified tiles of premium grade 10mm thick conforming to IS 4457 of 300mmx300mm of approved quality, colour in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with epoxy grout with required quantities of pigments of approved marks to match the shades of the vitrified tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as per specification and direction of Engineer-in-charge. 28 Ground Floor 29 Providing 40cmx40cm sizespecial plain/printed series matt finish ceramic floor tiles of premium grade of approved make having thickness 7mm to 8mm, conforming to IS 13755 for ceramic tileflooring of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient, grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the ceramic tile if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work, complete in all respect as directed by the Engineer-in-charge. 30 Ground Floor 31 Providing 30cmx60cm size special plain/printed seriesedge cut ceramic wall tiles of premium grade of approved make having thickness 6.5mm to 6.7mm conforming to IS 13753 of approved make & shade in Dadoes over 12mm thick cement plaster 1:3 (1 Cement: 3 Coarse sand) finished with modular pointing in white cement & pigment to match the shade of the tiles including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour curing sundries and T & P etc. required for the work etc. complete as per specification and direction of Engineer-in-charge. 32 Ground Floor 33 Providing 20mm thick and above 0.40 Sqm size granite stone flooring in staircase of approved quality, colour and size in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile if requiredwatering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 34 Ground Floor 35 Providing and fixing in position well dressed, naturally seasoned sal wood rebated frames of size 125mmx63mm to doors including two coats of hot bitumen applied to rear of frame in contact with masonry or concrete surface fixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge 36 Supplying fitting and fixing in position 32mm thick flush door with teak wood beading and 1mm thick sunmica to both side pasted with adhessive including fixing of fixtures like Godrej make Mortice lock having model no 9168, Godrej make Door closure having model no 8340, 100mm aluminium hinges, handle, tower bolt, stopper including cost of all materials, labour, all taxes, transportation, loading & unloading etc. complete as per specification and direction of Engineer -in-charge. 37 Providing and fixing in position WPC frames of following approved size to doorsfixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge. 75mm x 50 mm 38 Providing and fixing in position 28mm thick WPC shutters of approved size to WPC door frames with hinges, handles, tower bolt etc complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge 39 Providing and fixing lockable openable system Aluminum works for openable doors applications. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating, silicon coated to suit marine atmosphere. All profiles should be Non insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major accessories should also be made by the same manufacturer. All panels will have no visible hinge or connecting hardware and shall not be connected on any side of the outer frame. The outer frame Depth will be 72mm. All materials which are used should be corrosion-resistant so that they are good functioning in different environments and that there are no negative influences either on the aluminium or on the surface treatment. Glass to be used is 6mm – 8mm toughened, make Saint Gobain. The system should allow the application of glazing or panels with thickness up to 5-8mm. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1year warranty on wearing parts 40 Providing and fixing Anodized System Aluminum three track Sliding glazed windows of TOSTEM / SHUECO/ ALUMIL make suitable for 2.4 KPA windload with 50mm visible aluminium section width in the centre interlock. The system offered must be ride-in system with two glass panels moving inside the channel without any external overhung along with a provision for mesh panel on the third track. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Texguard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. All Slider doors & windows will be centre locking with integrated Anti-lift in slider panel. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 104 mm +/- 3 mm The bottom frame must use a subframe and no direct grouting will be permitted on bottom frame directly. All glasses will be 5- 6 mm clear toughened.The system should allow glass thickness up to 10 mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 41 Providing and fixing Anodized System Aluminum fixed windows of TOSTEM / SHUECO/ ALUMIL make, suitable for 2.4 KPA wind load. The extruded aluminium sections should be made from Grade 6063-T5 & Anodized with Tex guard coating. Corner connection will be Butt joint with using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 72 mm +/- 3 mm. All glasses will be 6 - 8 MM toughened depending on grid size. Beyond 6000 mm width, MS section (size 61 x 122 mm) coupling to be used with cover profiles of same anodized colour. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. 42 Providing and fixing Anodized System Aluminum glass louvers of TOSTEM / SHUECO/ ALUMIL make natural air flow ventilators. The extruded aluminium sections shall be made from Grade 6063- T5 Anodized with Tex guard coating. All other major Accessories should also be made by the same manufacturer. Only EPDM gaskets should be used in all meeting points instead of Brush Pile. The outer frame Depth will be 50 - 72 mm. System should have a 10-year warranty on properties, functionality and design, within restrictions defined by technical specifications of anodizing & 1-year warranty on wearing parts. 43 Supplying, fitting and fixing of M.S window grills ( as per I.S. specification and as per approved drawings ) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size ( 20mm size not to exceeds 25% ) including watering and curing etc. complete in all respect as directed by the Engineer in charge. 44 Supplying, fitting and fixing of M.S grill gates with top and bottom rails (as per I.S. specification and as per approved drawings) in proper position in all floors and at all height including making holes to brick walls/ R.C.C structure/wood work etc. and making good to the damagedwalls/ structures with cement concrete (1:2:4)with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceeds 25%) including watering and curing etc. complete in all respect as directed by the Engineer in charge. 45 Supplying, Fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90mtr C/Cand stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification buffing polishing etc with cost conveyance taxes of all materials labour T&P etc required for the complete in all respect. 46 Providing & fixing of Greenlam Sturdo Essentia Collection- Serene Restroom Cubicle (of following standard dimension which includes 600mm door size width) self-supporting 12mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Nylon Polyamide grade 6 & Aluminium alloy grade 6063-T6 powder coated finish in black and other available color hardwares as per manufacturers specifications & Architects instructions like (1) Self closing hinges in Nylon Polyamide grade 6 in gloss finish in available colors (2) Soft closing thumb turn lock made in nylon polyamide grade 6 in gloss finish in available colors (3) Single Coat hook in nylon polyamide grade 6 in gloss finish, available in similar available colors (4) U & F- profiles in Aluminium alloy grade 6063-T6 with powder coating in available colors (5) Nylon polyamide grade 6 Adjustable Leg (6) Top rail along with Nylon Polyamide grade 6 with end cap is a Round D shaped extrusion made of Aluminium alloy grade 6063-T6 with Powder Coating in available colors, (7) Rubber, (8) Screws & wall Plugs (SS316). The top fitting should consist of Matt finish aluminium alloy grade 6063-T6 in avilable colors, which will get fixed on pilasters with SS Screws, All screws will of 316 Grade in stainless steel. All pilasters are supported by grade- 6 Nylorn Polyamide Thermoplastic palm design pedestal footing with non corrosive steel inserts. The base anchored to the floor with grade 316 satin finish stainless steel screws with push fit capping at a clearance height of 150mm. Toilet Cubicle Partitions with standard dimensions of 1995mm Height x 1000mm Width x 1500mm Depth (which includes 600mm door width) 47 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to inside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 48 Ground Floor 49 Providing 12mm. thick cement plaster in all floors at all height with cement mortar of mix (1:6) finished smooth to outside smooth surface of brick masonry walls after racking out the joints including watering and curing, rounding of corners etc. complete with cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P and scaffolding required for the work etc. complete in all respect as desired by the Engineer in charge. 50 Ground Floor 51 Providing 6mm thick plaster in C.M. (1:4) over ceiling, chajja, loft, staircase, column, beams and walls after removing the false if necessary and close deep chipping including rounding of the corners, recess and roughening concrete surface where necessary, watering and curing, finished smooth over R.C.C. surface, including cost, conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge. 52 Ground Floor 53 Finishing wall surface with Acrylic wall putty to inside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. 54 Ground Floor 55 Finishing wall surface with Acrylic wall putty to outside surface of approved make and finished smooth and even surface to receive painting to inside surface including cost of scaffolding staging charges with cost of all materials taxes, labour T & P etc complete as per direction of Engineer-in-charge. 56 Ground Floor 57 Providing and painting two coats with plastic emulsion paint over a coat of primer of approved quality and approved shade in all floors at all height by making the surface to the interior plastered surface of wallsmooth including cost, coveyance, loading and unloading and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by the Engineer in charge. 58 Ground Floor 59 Painting to external surface of building with two coats of weather coat over a coat of primer of approved shade and quality of approved design, after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance and taxes of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge. 60 Ground Floor 61 Providing and painting two coats with synthetic enamel paint over a coat of red oxide primer of approved quality and approved shade confirmming to ISI on steel work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 62 Ground Floor 63 Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of6mm size black hard crusher broken granite chips with addition of water proofing compound of approved quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties, taxes of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge. 64 Ground Floor 65 Providing 20mm. average thick grading plaster with cement mortar of mix (1:4) in all floors at all height with portland slag cement on top of roof slab after chipping and chiseling the same and cleaning the entire surface with wire brush, finished smooth to proper slope and gradient with watering and curing etc. complete including cost, coveyannce, loading and unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer in charge. 66 Ground Floor 67 Providing and applying 2 coats of 1mm thick elastomeric cementitious waterproofing coating Brushbond RFX of Fosroc Chemicals Tested to ASTM D4060, ASTM D4541, ASTM D638, ASTM C836. with Adhesion to concrete : >1N/mm2for waterproofing structures like roof slabs, sunken slabs, chajjas, tunnels, water tank etc. after proper surface preparation and soaking the surface with water prior to application complete as specified and directed by the Department at all levels. 68 Providing kota stone flooring using Rajasthan kota stone of approved quality, colour and size of 25mm minimum thick in floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the kota stone with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the kota stone, if required , watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically and wax polishing etc. complete in all respect as per specification and direction of Engineer-in-charge. 69 25 mm. average thick artificial stone flooring with cement punning laid to proper slope with cement concrete of proportion (1:2:4) using screened and washed sharp sand for mortar with black hard crusher broken granite stone chips of approved quality and from approved quarry, washed and cleaned laid in two layers i.e. the bottom layer being 19 mm . thick and top layer of 6mm. thick with 12mm. to 20. size black hard crusher brokenstone chips (20mm size chips not to exceed 25%) including chipping and chiseling and cleaning the top surface of the floor slabs in upper floors, including rounding of corners, watering and curing with cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge 70 Providing and injecting chemical emulsion for pre - constructional antitermite treatment as per IS specification and creating a chemical barrier in bottom and sides of foundation trenches, top-surface of plinth filing junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and cables etc. complete using approved quality of chemical emulsion of requisite quantity prescribed by the manufacturer as directed by the Engineer-in-charge including cost of all materials and labour taxes etc. complete. (indemnity bond for warranty for 5 years to be furnished) 71 Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. 72 Rolling & compacting to sub grade or formation loosening by cutting earth for 15cm below the sub grade including watering and compacting in layers by PRR, cost & conveyance of required quantity of water, cost of all labour sundries, T & P etc. required for the work to complete in all respect as per specification and direction of Engineer-in-charge. 73 Construction of granular sub-base by providing Close graded Granular subbase Grading-IV material as per table 400-1, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoSRT&H Specifications for Road & Bridge works (5th Revision) etc complete as per direction of Engineer-in-charge. 74 Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in subbase/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works 75 Supplying and laying of M40 grade heavy duty factory made hydraulically pressed and mechine vibrated free cast interlocking pavers of 80mm thick, coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. 76 Providing and laying at or near ground level factory made kerb stone of M-30 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 77 Providing and painting two coats with synthetic enamel paint over a coat of cement primer of approved quality and approved shade confirmming to ISI on cement work to give an even shade in all floors at all height including sand papering and making the surface smooth with cost, coveyance, loading and unloading, and taxes of all materials, cost of all labour, sundries, T&P, scaffolding etc. required for the work and complete in all respect as directed by Engineer-in-charge. 78 Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, i/c cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete. 79 Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 80 Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge 81 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001 82 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm 83 Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm 84 Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). 85 Providing Retro-reflective regulatory sign board of size 900 mm dia meter made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge. 86 Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge. 87 Plastic Waste bin Rectangular alongwith fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level. Capacity-60 350x350 mm Top Dia.250x250 mm Bottom Dia.850 mm Height pair Sintex, Nilkamal, Otto, Aristo 88 Plastic Waste bin without Wheel with Push type Top load along with fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level capacity 60 pair 350x350 mm Top Dia. 250x250 mm Bottom Dia. 850 mm Height Sintex, Nilkamal, Otto, Aristo 89 Plastic Waste bin without Wheel with Swing lid type Top load along with fabricated MS stand with one coat of primer and two coats of enamel paint for stand. MS stand should be grouted properly on the ground level. Capacity-60 pair 350x350 mm Top Dia. 250x250 mm Bottom Dia. 850 mm Height Sintex, Nilkamal, Otto, Aristo 90 Trenching in ordinary soil upto a depth of 60 cm including removal and stacking of serviceable materials and then disposing of by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge of land manure before and after flooding trench with water (excluding the cost of imported earth, sludge or manure). 91 Supplying and stacking of good earth at site (Earth measured in stacks will be reduced by 20% for payment) with all lead and lift. 92 Supplying and stacking sludge at site (sludge measured in stacks will be reduced by 8% for payment) with all lead and lift. 93 Supplying and stacking at site dump manure fromdumping place nearest to site of work.(manure in stack will be reduced by 8% for payment) with all lead and lift. 94 Screened through sieve of I.S designation 20 mm. 95 Screened through sieve of I.S designation 16 mm. 96 Screened through sieve of I.S designation 4.75 mm. 97 Rough dressing the trenched ground including breaking clods. 98 Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of up rooted vegetation with all lead and lift. 99 Fine dressing the trenched ground. 100 Spreading of sludge, dump manure or land good earth in required thickness. (Cost of sludge, dump manure or/and good earth to be paid separately). 101 Mixing earth and sludge or manure in proportion specified or directed. 102 Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge 103 Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. 104 Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 60 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (The manure/sludge shall be paid for separately). 105 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 106 Holes 60 cm dia, and 60 cm deep 107 Holes 45 cm dia, and 45 cm deep 108 Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge. 109 Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal & 4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of Officer-in-charge.Top inside dia 35 cm, outer bottom dia 25 cm, total height 35 cm with wall thickness of 25.4 mm 110 Filling of the following size empty pots with mixture of good earth & manure in the ratio of 2:1 (Two part of Good earth & one port of manure) and placing them on appropriate place i/c carriage of earth, manure and pots up to 50 mtr, as per direction of officer incharge. (The cost of good earth, earthen pots & manure will be paid separately.) Size of Empty Pots 35cm Top dia, 25cm Bottom Dia & 35cm Perpendicular height. 111 Anti termite treatment by digging pits 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of officer-in-charge. 112 Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of officer-in-charge. 113 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) 114 Trees Plant 115 Shrubs Plant 116 Hedge Plant 117 Providing and displaying of Aglaonema dove variety Plant, having ht. 30 cm to 45 cm with 8 to 10 leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 118 Providing and displaying of Aglaonema Snow-White hybrid plant (three in one), having ht. 30 cm & above with 6 to 8 leaves, bright colour, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot . (Specimen Plant) & as per direction of the officer-in-charge. 119 Providing and displaying of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 120 Providing and displaying of Croton Challanger variety plant, having ht. 30cm and above, well developed with full of fresh and healthy leaves in 20 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 121 Providing and displaying of Croton Baby Golden plant (three in one), having ht. 30cm, multi branches, well developed with fresh and healthy foliage in 25 cm size of Earthen pot / Plastic pot. as per direction of the officer-incharge. 122 Providing and displaying of Dracaena Song of India plant (three in one), having ht. 30 cm and above, multibranched, well developed with fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 123 Providing and displaying of Money Plant Broad Leaves mounted on moss stick 90 cm ht., 3 to 4 plants in each pot, well developed with full of fresh & healthy leaves in size of 25 cm Top dia x 18 cm Bottom dia x 25 cm Perpendicular height Earthen pot / Plastic pot . & as per direction of the officer-in-charge. 124 Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot / Plastic pot & as per direction of the officer-in-charge. 125 Providing and Displaying plants Cladium Hybrid variety 3 to 4 plants in a pot well developed with fresh & healthy foliage 30 to 45 cm ht. in different colour 25 cm Earthen Pot/Plastic Pot and as per direction of the officer incharge. 126 Providing and Displaying plants Cosmos well developed fresh & healthy 20 to 25 cm ht. attractive colours multi branching at blooming stage in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 127 Providing and Displaying plants Creeper Rose variety 3 to 4 healthy branch 60 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. 128 Providing and Displaying plants Standard Rose (H.T. variety) 3 to 4 healthy branch 90 cm and above ht. well developed with one and above flowers in 25 cm Earthen Pot, as per direction of the officer-in-charge. 129 Providing and Displaying Acalypha green plant well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge. 130 Providing and Displaying Bamboo Buddha vally variety with umbrella shape plant having 120 to 135 ht. with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant as per direction of the officer-in-charge. 131 Providing and Displaying Fishtail palm plant well developed with fresh & healthy foliage leaves of ht 210 to 240cm Specimen plant in 35 cm Cement Pot as per direction of the officer-in-charge. 132 Providing and Displaying Foxtail palm plant well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. 133 Supply and stacking of Acacia auriculiformis plant of ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. 134 Supply and stacking of Adansonia digitata (kalp vricksh) plantof ht 150-165 cm in bag size of 25 cm as per direction of the officer-in-charge. 135 Supply and stacking of Azadirachta indica ( Neem ) plant of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. 136 Supply and stacking of Bottle palm plant of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags. 137 Supply and stacking of Casuarina equisetifolia plant of height 150-165 cm in big poly bags of size 25 cm as per direction of the officer-in-charge. 138 Supply and stacking of Ficus nuda plant of height 120-135 cm. with 6-8 branches and lush green foliage in g. bags of size 25 cm as per direction of the officer-in-charge. 139 Supply and stacking of Nauclea cadamba (Kadam) plant of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.v 140 Supply and stacking of plant Bauhinia acuminata height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. 141 Supply and stacking of plant Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge. 142 Supply and stacking of plant Hibiscus rosasinensis of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge. 143 Supply and stacking of plant Nerium oleander (kaner) dwarf of height 30-40 cm. in earthen pot of size 20 cm as per direction of the officer-in-charge. 144 Supply and stacking of plant Thuja compacta of height 75-90 cm., conical shaped, well formed with healthy foliage in earthen pots of size 30 cm as per direction of the officer-in-charge. 145 Supply and stacking of Jasminum humile (Yellow) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 146 Providing and fixing overhead type sprinkler system with self closing valve type 25mm X 20mm with self closing springmade up ofalluminium alloy and brass fittings including cost of all materials, labour, T & P etc complete as per direction of Engineer-in-charge. 147 Supplying all materials, labour, T&P and fixing 15mm dia CPBib cock of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. Make: Jaquar/Grohe/Johnson/Roca 148 Supplying all materials, labours, T&P and fitting and fixing of the 20mm dia CPVC pipeconfirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 149 TOTAL FOR CIVIL WORKS-(A) 150 PH WORKS 151 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china floor mounted European water closet of Hindware make having cat no 20087 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 152 Supplying all materials, labours, T&P for fitting and fixing white glazed vitreous china wall mounted European water closet of Hindware make having cat no 20098 or equivalent type of approved make including supply of matching P/S trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete including cost of WC pan, PVC seat cover with CP brass hinges and rubber buffers etc all complete including cost, taxes and conveyance as per specification including polishing etc all complete as per PH specification and direction of Engineer-in-charge. 153 Supply all materials, labour,T&P for fitting and fixing of Pneumatic tank 3/6L with full frame andPneumatic faceplate in polished chrome of Jaquar make having cat no 517444 and 525732 or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, connecting pipe with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. 154 Supply all materials, labour,T&P for fitting and fixing of dual flush PVC cistern of hindware sleek essence make or equivalent type of approved make complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc 32mm dia flush bend, 15mm dia 450mm long PVC water connecting pipe of jaquar make having cat no ALD 803AB with CP or brass union nuts at each end as per PH specification all complete as per direction of Engineer-in-charge. 155 Supplying all material, labour T&P and fixtures for providing and fixing of white glazed vitreous chinaware counter top wash hand basin of size 49cm dia of Hindware make having cat no 10052 or equivalent type of approved make with bottle trap of Jaquar cat no ALD 769L250x190 with CP waste coupling nut of Jaquar make having cat no ALD 709 and 15mm x 450mm PVC connection pipe of Jaquar make having cat no ALD 803AB with MS bracket with wooden plugs CP screws including cost of cement, sand, labour, T&P etc. complete including testing cost, conveyance, royalty and taxes of all materials etc. complete as per PH specification and direction of Engineer-in-charge. 156 Supplying and fixing urinal of hindware make having cat no 60022/60023 or equivalent type of approved make including all fittings like 450mm long connection pipe of Jaquar make having cat no ALD 803B, waste pipe etc of approved make etc complete as per PH specification and direction of the Engineer-in-charge. 157 Supplying and fixing 12mm thick toughened glazed urinal division plate of approved size with etching and polishing including concrete grouting and edge moulding etc complete as per PH specification and direction of the Engineer-in-charge. 158 Supplying all materials, labor T&P for fitting and fixing in all floors fixed type glass mirror of size 600mm x 450mm best INDIAN make of 5.5 mm thickness with supply of 13mm thick asbestos backing and wooden plugs C. P. Brass screw including cost, conveyance, royalty, taxes of all materials complete as per P.H. specification and direction of Engineering-in-charge. 159 Supplying all materials, labour, T&P and fixing standard sized15mm dia Concealed Stop cock of Jaquar Cat. No.-FLR 5083NK or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 160 Supplying all materials, labour, T&P and fixing standard sized15mm dia Angular Stop cock of Jaquar Cat. No.-FLR 5053N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 161 Supplying all materials, labour, T&P and fixing standard sized15mm dia pillar cock of Jaquar Cat. No.-FLR 5015 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 162 Supplying all materials, labour, T&P and fixing two way Bib cock of Jaquar Cat. No.-FLR 5041N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 163 Supplying all materials, labour, T&P and fixing health faucet of Jaquar Cat. No.-ALD 573 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 164 Supplying all materials, labour, T&P and fixing standard sizedCP towel ring square of Jaquar Cat. No.-ACN-1121N or equivalent etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 165 Providing and fixing C.P. Glass shelf 600mm long of Jaquar Cat. No.-ACN-1171N or equivalent type of approved make fixed to wall including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 166 Supplying all materials, labour, T&P and fixing standard sizedCP Soap case of Jaquar Cat. No.-ACN-1131N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 167 Supplying all materials, labour, T&P and fixing standard sized liquid soap dispenser of Jaquar Cat. No.-ACN 1135N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 168 Supplying all materials, labour, T&P and fixing standard sizedCP toilet paper holder of Jaquar cat. No.-ACN1153S or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 169 Supplying all materials, labour, T&P and fixing standard sizedCP robe hook of Jaquar Cat. No.-ACN 1191N or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 170 Providing all materials, labour,T&P and fittings and fixing of flush valve of Jaquar Cat. No.-PRS 073 or equivalent type of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. 171 Providing and fixing 6L step can in stainless steel of Kohler make having cat no K-17531T-ST etc complete as per PH specification and direction of the engineer in charge 172 Providing and fixing fragrance disperser of Euronics make having cat no EA44 etc complete as per PH specification and direction of the engineer in charge 173 Providing and fixingcircular type stainless steel grating with hole for floor /nahani trap etc complete as per PH specification and direction of the engineer in charge 174 Supplying all materials, labours, T&P and fitting and fixing of the following size of CPVC pipe SDR11 confirming to IS 15778 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance and taxes of all materials all complete as per PH specification and direction of Engineer-in-charge. (Concealed) 175 15 mm dia 176 20 mm dia 177 25 mm dia 178 32 mm dia 179 Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe S-80confirming to IS 13592 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) 180 40mm dia 181 50mm dia 182 Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. 183 75mm dia 184 110mm dia 185 Supplying all materials, labour, T&P, fitting and fixing of UPVC SWR fittings of approved make with requisite testing etc complete as per PH specification and direction of Engineer-in-charge. 186 110mm dia Single Junction with door 187 110mm dia Double Junction with door 188 110mm dia Cowl 189 110mm dia Plain Bend 190 110mm dia SWR Door Bend 191 125mm x 110mm Gulley Trap 192 110mm dia Tee with door 193 110mm dia Single Junction without door 194 110mm dia Socket Plug 195 110mm dia Pipe clip 196 110mm diaCoupler 197 75mm dia Plain Bend 198 Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. 199 25mm Dia 200 32mm Dia 201 40mm Dia 202 50mm Dia 203 Providing & fixing of 50mm dia UPVC body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS specification. 204 Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 205 Supplying all materials,labours,T&P for cutting holes through existing RCC floors & roofs including making good the damages for taking GI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 206 Supplying all materials,labours,T&P for cutting holes through existing brickwork including making good the damages in cement mortar (1:4) for taking SWR/HCI pipes and fittings/PVC pipes and fittings etc all complete as per PH specification and direction of Engineer-in-charge. 207 Supplying all materials,labours,T&P for cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per direction of Engineer-in-charge. 208 Supplying all materials, labour, T&P and fittings and fixing of 1000 LTR Poly Propelene white double layer water storage Tank of approved make confirming to IS 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc including hoisting upto terrace level and placing the tank to the required position etc all complete as per PH specification and direction of Engineer-in-charge. (To provided with brick masonary guard walls which will be paid separately) 209 Supplyng all materials, labour, T&P for construction of brick masonary Gulley trap chamber of size 250mm x 250 mm with CI gulley trap, by flyash brick masonry in CM (1:4), CP (1:3) with 150mm x 150mm CI grating including labour and materials for fitting and fixing 100mm dia square mouth CI gully trap with supply of all jointing materials and encasing the gully trap with a block of CC (1:3:6) with 25mm size hard stone metal all complete with providing and fixing of 250mm x 250mm precast RCC cover slab including cost, conveyance, taxes of all materials to site complete as per the PH specification and direction of Engineer-in-charge. 210 Supplying all materials, labour, T&P, fitting and fixing UPVC SWR pipes & fittings of approved make confirming to IS-13592, both below and above ground level / floor and on walls including supply of bobbins, nains, screws, wooden cleats, pipe clips as per requirement, including earth work in excavation and fitting, including cuting walls and floor and making good the damages with cement concrete (1:2:4) with hard granite chips, incluidng scaffolding wherever necessary all complete as per the PH specification and direction of the Engineer-in-charge. 211 150mm dia 212 200mm dia 213 Supplying all materials, labour, T&P and necessary materials towards laying of RCC NP2 Hume pipe push tight joint type (including cost of RCC Hume pipe) inside the pipeline trench of required size with plastic rope without damage to the pipe with all convenience the materials to site and including all taxes all complete as per direction of Engineer-in-charge. 214 150mm Dia 215 200mm Dia 216 Supplying all materials,labours,T&P for constructing inspection chamber of 900mmx800mmx450mm with cement concrete (1:3:6) on bed with hard granite metal size 40mm and flyash brickwork in cement mortar (1:4) in foundation and plinth, 100mm thick RCC M25 cover slab with supplying fitting and fixing of medium duty SFRC manhole cover, moulding and shaping the channel and benching with cement concrete (1:2:4) using 12mm size hg chips,12mm thick cement plaster in cement mortar (1:3) with punning to inside, cement plaster in CM (1:3) to outside the chamber including centring, shuttering, providing required quantity of MS rods and binding wires for reinforcement, bending, binding, tying the grills and placing in the proper position and drawing and design and PH specification including cost, conveyance, royalty, taxes etc for all materials as per the drawing, design and direction of Engineer-in-charge. 217 Construction of circular brick masonary manhole chamber of size 1.20 x 0.90 mtr including cement concrete (1:3:6) in bed by using 40mm size granite metal, brickwork in CM (1:4) in foundation & plinth, cement plastering (1:3) over flyash brick, plastering in CM (1:3) with neat cement punning, CC (1:2:4) over bed for benching and channeling, RCC M25 for roof slab of 150mm thick and supply fitting and fixing SFRC medium duty type cover including cost of centring and shuttering cost of MS rod for RCC work, supplying fitting and fixing of the polypropelen step iron of required interval etc all complete with all cost, conveyance, royalties taxes etc all complete as per direction of Engineer-in-charge. 218 Extra for every additional depth of 0.10mtr or part there of manhole size 1200x900mm from 1100mm to 1650mm depth (data for 0.10 mtr per each) 219 Earthwork in excavation upto 1.50mtr depth of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stony earth, earth mixed with boulders etc but not requiring blasting with initial leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with T&P for shoring, shuttering, dewatering if required etc. complete as per the drawing, design including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. 220 Extra lift or 1.5m or part there of over the initial lift of 1.5m in all kinds of embankments and road works and ordinary earth work in general. 221 Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. 222 Providing and laying in trench cement concrete ( 1:4:8 ) with 40mm size hard granite metal in the following type of bedding for pvc pipes of the following internal diameter including curing complete as per specification (A1-Type Bedding) 223 150mm Dia 224 200mm Dia 225 Supplying all labour, T&P for the Carriage of excavated earth by mechanical means of transport within 5.00 K.M. lead including hire and running charges of vehicles, labour charges for loading and unloading as required for the work etc. complete as per the direction of the Engineer-in-charge. 226 Supplying and filling the pipeline trench with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance, royalty and taxes of all materials, cost of all labour, T&P etc. as required for the work complete as per direction of the Engineer-in-charge. 227 Supplying and construction of 100 user septic tank of standard size as per drawing, design and direction of Engineer in charge. 228 Supplying all materials,labours,T&P and constructing 1.22m dia and 2.1m depth soakway pit with precast RCC rings joined loose,gravel backing in the rear of well steining,precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty etc all complete as per approved specification and direction of Engineer-in-charge. 229 Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: 230 Rocky terrain with boulder formation for 300m depth 231 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). 232 Supplying 200mm polyvinyl chloride pipes as per ASTM-D-1785-89 schedule 80 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and internal threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes,pipes shall be provided with a groove at the male thread to accomodate flexible PVC/Rubber O ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. 233 Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials. 234 Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department) 235 Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge 236 Supplying all materials, labours, T&P, fitting and jointing of 80mm dia double flanzed column GI pipe confirming to IS 1239/1968, medium class having IS mark of approved make / tata medium series with socket and screw joint including supply, fitting and fixing of required number of IS certified fitting, cutting threads to pipe and pipes to length including wastage providing necessary offsets and lay screw with extra socket and jam nut including fixing to wall and floors with supply of holder bats, clamps, fixing wooden plugs in walls complete as per direction of Engineer-in-charge. 237 Supply, installation, testing and commisioning of vertical submerssible pump set of approved make having discharge 30m3 per hour and 70mtr head including installation of pump set withwire ropes, clamps etc inside the borewell, etc complete as per the Direction of Engineer-in-charge. (Duty of pump to be decided depending upon yeild of the borewell) 238 Supply, installation, testing and commisioning of automatic star delta control panel suitable for 10HP pumpset including MS box fitted with main switch ,contactor, single phasing preventer, timer, selector switch, voltmetre, ammeter etc and connection with motor inside the borewell complete as per the Direction of Engineer-in-charge. (Excluding power supply and flat cable for connection with motor) 239 Protection to the Borewell with CC base 240 3 core 6.0sqmm copper flat cable 241 Bore Cap 242 Clamp 243 Supplying all materials, labours, T&P and fitting and fixing of the following size of UPVC pipe (Sch-80)confirming to ASTM D1785 certification mark with socket and screw joints in walls and floors including supplying of required number of fittings of approved make including cutting threads to pipes and pipes to length, including wastage,etc for fitting to the walls with supply of holder ats, clamps, fixing wooden plugs in walls, including testing of pipe line for water tightness complete as per IS specification including cost, conveyance of all materials all complete as per PH specification and direction of Engineer-in-charge.(Non Concealed) 244 80mm Dia 245 65mm Dia 246 Supplying all materials, labour, T&P, fitting & fixing of different size UPVC Ball Valve of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance of all materials, T&P etc. all complete as per P.H. specification and direction of the Engineer-in-charge. 247 65mm Dia 248 80mm Dia 249 Providing & fixing of following dia UPVC body non return valve of approved make with high tensile bress rising stem suitable for the system pressure as per IS specification. 250 65mm Dia 251 80mm Dia 252 Supplying all materials & labour, T&P and constructing brick masonary chamber for water sluice valve, single air valve & non return valve with flyash brick masonary in cement mortar (1:4) as per approved drawing and specification CC (1:4:8) with 4cm size hard granite metal on the bed, 12mm cement plaster (1:3) to inside and cement flush pointing (1:3) to outside surface with 100mm thick RCC M25 cover slab with 12mm hg chips using required quantity of tor steel, centring and shuttering to the slab and dismantling it after 31 days of casting, filling the outside cavity with excavated materials, watering, curing including cost, conveyance, taxes of all materials, labour charges for cutting, bending, binding and tying the grills in proper position etc all complete as per drawing, design and direction of Engineer-in-charge. 253 Sluice Valve Chamber (0.75x0.75x1.20mtr) 254 Supplying all materials, labour, T&P, fitting & fixing of different size bourden type pressure gauge of reputed make (0-10 kg/sqcm) with valves, piping, fitting of approved make including supply of all necessary jointing materials such as red lead paint, yarns etc. including cost, conveyance & taxes of all materials, T&P etc. all complete as per P.H. specification and as per the direction of the Engineer-in-charge. 255 Supplying all materials, labour, T&P and fitting and fixing of double air valve confirming to the relevant IS specification and dimension including fixing it in position along the pipeline with supply of all required materials such as rubber insertion, nuts & bolts including cost of all materials, taxes, and duties, transportation charges from store to site etc all complete as per the direction of Engineer-in-charge. 256 INTERNAL ELECTRIFICATION WORK 257 TRAININING ROOM AND SKILL DEVELOPMENT CENTER 258 Wiring 259 Wiring to light points/fan point/exhaust fan point/Call bell point with 1.5-sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non metalic PVC flexible condute with 6Amp, 250V Modular Switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) 260 Primery point 261 Secondary point 262 Call bell point 263 Wall bracket fan/Air circulator point specification same as above. 264 Exhaust fan point specification same as above. 265 Ceiling fan point consisting of modular regulator of Legrand make model name Myrius or equivalent on existing switch board 266 Supply and fixing of 6Amp plug with 6amp switch on existing board (Modular type ISI marked) 267 Point wiring for 5 / 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (convinient power) (Make of wire-Finolex/ L&T/ Anchor/ Havells/ KEI) 268 Supply and fixing of ISI marked modular type 2nos 6Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. 269 Supply and fixing of ISI marked modular type 1nos 6Amp plug with switch and 1nos 16Amp plug with switch on suitable size of metal box and modular cover in fronton surface or recess including all conection. 270 Supply and fixing of modular metal box on surface or recess with suitable size of modular cover in front including providing an fixing of ISI marked 16Amp plug with switch with all conection. 271 Supply& fixing of Modular type 25 Amp one way switch and socket outlet for AC point with metal box and modular cover. 272 Recessed/surface extra lead submain wiring alongwith earth wire with the folowing size of PVC insulated single core multistrand coper conductor of ISI marked conforming to IS 694/1990 in 20mm dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) exceeding to Long point in 2x1.5sqmm + 1x1.5sqmm. 273 Submains: 274 Recessed/surface submain wiring alongwith earth wire with the following size of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in required dia non metalic heavy duty flexible condute 1.6mm in surface/recessed PVC condute as required. (Make of wire-Finolex/ L&T/ Anchor/ Havells/ Great White/ KEI) 275 2 x 2.5 sq.mm. + 1 x 1.5 sq.mm. 276 2 x 4.0 sq.mm. + 1 x 1.5 sq.mm. 277 2 x 6.0 sq.mm. + 1 x 2.5 sq.mm. 278 4 x 4.0 sq.mm. + 2 x 2.5 sq.mm. 279 4 x 6.0 sq.mm. + 2 x 2.5 sq.mm. 280 4 x 10.0 sq.mm. + 2 x 4.0 sq.mm. 281 CONTROL PANELS : 282 Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge.All MCCB shall confirm to IEC- 60947 and IS-13947. MCCB shall comply with the isolation function requirement of IEC-60947-2 section 7.1.2 to be marked as suitable for isolation / disconnection to facilitate safety of person in use. All MCCB have Ics=100% Icu and the overload setting should be from 0.7 to 1 times of Ir for thermal magnetic release and for microprocessor release the overload Settings: 0.4 to 1 times of Ir. Manually closing mechanism should be accommodated in a Moulded housing of robust and vermin-proof construction. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open) . The tripping devices shall be ambient temperature compensated type. The insulating case shall be made of high strength heat resistant and flame retardant thermosetting insulating material. 283 MAIN PANEL (TRAININING ROOM AND SKILL DEVELOPMENT CENTER). Incoming - (MCCB: 1 No 250A (36kA) 4P thermal magnetic(TM) release with ROM & spreader links. SPD: 1No 50kA 4P T1+T2. MCB C: 1 No 63A 10kA 4P.CHANGE OVER SWITCH: 1 no 250A 4P On Load Change OverSwitch.); Outgoing -(Busbar: 2 SET, 4Nos 320 Amp Copper Strips. (CD=1.6A/sqmm). MCCB: 4 Nos 100A (16kA) 4P thermal magnetic(TM) with ROM & spreader links for DB Training Room & Skill Development Center, DB Community Hall, OAT & Spare. MCCB: 5 No 63A (16kA) 4P thermal magnetic(TM) with ROM & spreader links for Pump Room, STP DB, External Light Feeder Panel, Solar Input & Spare.); Instruments - (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 284 DB TRAININING ROOM AND SKILL DEVELOPMENT CENTER (TRAININING ROOM AND SKILL DEVELOPMENT CENTER).Incoming- MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 100A 4P On Load Change OverSwitch); Outgoing - [Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 3 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 3 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 3 Nos 40A 10kA 2P for SPN BDB/ SPARE]. Instruments - (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 285 Distribution Board COMMUNITY HALL:Incoming - (MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 80A 4P On Load Change OverSwitch); outgoing - [Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 3 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 3 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 3 Nos 40A 10kA 2P for SPN BDB/ SPARE]; Instruments- (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 286 Distribution Board OAT:Incoming - (MCCB: 1 No 80A (16kA) 4P thermal magnetic(TM) release with ROM & spreader links. CHANGE OVER SWITCH: 1 no 80A 4P On Load Change OverSwitch); Outgoing -[ Busbar: 2 SET, 4Nos 100 Amp Copper Strips. (CD=1.6A/sqmm). MCB C 2 Nos 40/63A 10kA 4P for 4 Way TPN BDB for Power & Spare. MCB C 2 Nos 32A 10kA 4P for 4 Way TPN BDB for Light & Spare. MCB C 2 Nos 40A 10kA 2P for SPN BDB/ SPARE. MCB C 8 Nos 32A 10kA 2P for Power Cercuit/SPN BDB/ SPARE]; Instruments- (1 Set of LED type RYB phase indicating lamps with control fuses & 1no multi function meter with required CTs) 287 Supply, delivery, installation, testing & commissioning of L.T. indoor floor/ wall mounted type distribution boards made out of reputed company IP 43 - #IK 09 with metal door having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-charge. 288 4way TPN BDB for Light: Incoming - (1 no of 25A 30mA 4P RCCB); Outgoing-(12 nos of 6-16A SP MCB C) 289 4way TPN BDB for Raw Power: incoming - (1 no of 63A 4P MCI); Outgoing - (12 nos of 10-32A SP MCB) 290 12 way SPN BDB: incoming- (1 no of MCB C 32A (10kA) 2P); Outgoing- (10 nos of 6-10A SP MCB C. Cable Laying) 291 Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. 292 4 core x 240 sqmm A2XFY 293 4 core x 25 sqmm A2XFY 294 Cable termination: 295 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required complete as per the direction of Engineer-in-charge. 296 4 core x 240 sqmm A2XFY 297 4 core x 25 sqmm A2XFY 298 Earthing 299 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required and as per the direction of Engineer in charge. 300 Providing and fixing of 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 301 Providing and fixing 4.00 mm dia hard drawn bare copper wire on surface or in recess for loop earthing as required. 302 Fittings & Fixtures 303 Supply,installation, testing & commissioning of following types of light fixtures directly on wall / ceiling of building with allaccessories such as drivers, lamps cover etc complete assembly including supply of all accessories and making connection from the suitable point outlet complete as per the direction of Engineer-in-charge. 304 22 watt LED extruded aluminium batten for continuous operation and available in 4ft run length, suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN021C LED22S complete. 305 12 watt LED extruded aluminium batten available in 2ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting (with accessories) similar to make ‘Signify’ Cat no. BN 021 LED12S 6500 complete. 306 Inverter type 9 watt LED Bulb on existing holder of approved make 307 12 watt LED, Brightest metal surface light with 100lm/W light output, Full low diffusor allows for wider light spread of 270 degrees, Aluminum die cast housing for better heat dissipation, Longer life of 30,000 hours^, Super slim design with a height of just 38mm allowing the product toblend seamlessly with the ceiling, Surge protection of 3kV with wide voltage protection of 160-360V similar to make Philips model name Metal FullGlow complete. 308 65-70 watt Highbay LED efficacy of 150Lm/W with its robust housing design and cater to diverse applications with multiple options of beam angles and suitable for surface mounting (with accessories) similar to make ‘Philips’ Cat no. BY515P LED100S 5700 complete. 309 36 watt SmartGlow is an intelligent office lighting recessed luminaire with built in PIR occupancy sensor offering flexibility of auto switching off when the space is not occupied similar to make Signify Cat no.RC383B P LED 36S complete. 310 5 watt recessed mounted down light, Decorative finish downlighter with hallmark silver ring for beautiful aesthetics, Ultra thin trim for a seamless fit, High lumen efficiency, Aluminum housing for better performance, Designed for robustness: wide voltage protection from 160V-360V, Surge protection up to 2.5kV similar to make Philips model Aura StylEdge complete. 311 7 watt recessed mounted down light, Decorative finish downlighter with hallmark silver ring for beautiful aesthetics, Ultra thin trim for a seamless fit, High lumen efficiency, Aluminum housing for better performance, Designed for robustness: wide voltage protection from 160V-360V, Surge protection up to 2.5kV similar to make Philips model Aura StylEdge complete. 312 10 watt LEDTrack light, Long-lasting fixture, Robust metal construction, Functional, minimal design, Perfect fit for any home/outlet, Wide voltage protection from 160V–360V and surge protection up to 2KV, Premium white aluminium housing,No harmful UV radiation similar to make Philips Stanchion Track Light model no.31445 complete. 313 Track fo installation of track light similar to make Philips Stanchion Track model no 31442 complete. 314 48-50 watt LED Suspended 50mm aluminium extruded linear lighting luminaires with superior white powder coated finish (with accessories) similar to make ‘Philips’ Cat no. SP780P LED52S-6500 complete. 315 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, Ceiling Fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. Canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required similar to make Crompton Cat no. Energion HS - 5 Star BEE complete. 316 Supply, delivery, installation, testing & commissioning of single phase 400mm sweep wall mount fan similar to make Crompton Cat no. WM Hiflo Wave Plus complete. 317 Supply, delivery, installation, testing & commissioning of wall mounted air circulator 750mm sweep (Crompton make model nameAC750WALL / Havells/ Bajaj) 318 Supply, delivery, installation, testing & commissioning of single phase 600mm sweep 900 RPM heavy duty Exhaust fan(Crompton make cat no EXHD600-6-1/ Havells/ Bajaj) 319 Supply, installation, testing & commissioning of metal Exhaust Fan 300mm sweep similar to make ‘Crompton’cat no Trans Air 12 complete. 320 Supply, delivery, installation, testing & commissioning of plastic Ventilation fan 150mm sweep similar to make Crompton cat no Brisk Air Neo 6 complete. 321 Supplying and fixing Call bell Buzzer suitable for single phase, 230 volts, 1 Module of similar to make Legrand Myrius Cat no. 6792 50 complete. 322 Supply and fixing circular / hexagonal G.I. box for ceiling fan hook, of internal dia 140 mm, 75 mm height, top lid of 1.5 mm thick G.I. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the G.I.box by means of 3.3 mm dia round headed screws, one lock at the corners. Hook shall be made of 10 mm dia galvanised M.S. bar bent to shape as per standard drawing. 323 Providing and fixing extra down rod of 20 cm length G.I. pipe 20 mm dia heavy gauge including painting etc as required. (more than 5 cm lenght shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored.) 324 Testing, commissioning and charging of entire wiring system for TRAININING ROOM AND SKILL DEVELOPMENT CENTER. 325 Testing, commissioning and charging of entire wiring system for COMMUNITY HALL. 326 Testing, commissioning and charging of entire wiring system for OAT GREEN ROOM. 327 EXTERNAL ELECTRIFICATION (100kVA SUB-STATION) WORK 328 CABLING WORK 329 Supply of following size of PVC Armoured cables ISI marked. 330 4 core x 150 sqmm A2XFY 331 Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 332 4 core x 150 sqmm A2XFY 333 Cable Trench & Hume Pipe 334 Construction of cable trench of size [1000mm(W) x 1000mm(D)] complete , base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as per the approved drawing 335 Construction of cable trench of size [600mm(W) x 1000mm(D)] complete, base foundation with C.C 1:3:6, 250mm brick walls,filling the inside area with sand, removableRCC slab for chambers with C.C 1:2:4 on the top, wall and top plastering etc complete as per the approved drawing. 336 Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc completeas per direction of Engineer-in-charge. 337 150mm dia RCC Hume pipe 338 250mm dia RCC Hume pipe 339 TRANSFORMER INSTALLATION WORK 340 Supply & fixing CT meter sheet steel enclosures made out of 16 gauge CRCA sheet ,double door with lock, neopraene gasket all around, two numbers earth lugs including painting ,padlock arrangement. Class 0.5 with O/P burden of 30VA 341 Supplying and erection of 150X 150 RS joist pole of 11m long. (30.6 kg /mtr). 342 Supply installation and commissioning of 200Amp 11kv on load isolated air brake switch with braking capacity of 10kA complete with following accessories. Knife blade switches both Male/Female. Operating GI pipe with handle & rotating mechanism. Pad locking arrangement with pad lock. Scope also includes interconnecting AB switch OH line with 30sqmm AAC conductor & interconnection to pin insulator/HG fuse set by suitable Cu flexible strip .Spring earth of the handle ,earthing of switch etc. 343 Supply installation and commissioning of 11kV home gap fuse set on the double pole structure. The 11KV HG fuse set to be complete with 11KV insulators Cu horn gaps etc. The scope also includes interconnecting the HG fuse with transformer with 0 SWG HDB Cu conductor. (11KV, 200Amp, 3Pole) 344 Supply installation and commissioning of 11KV lighting arrester including interconnection by 30sqmm AAC conductor & clamp(12KV, 5KA) 345 Supply and fixing of substation bracket inj complete set. With 100x50x6 mm for MS channel, 75x40x6mm MS channel for AB switch and HG fuse, 50x50x5mm MS angle for Transformer (140Kg) including painting. 346 Supply installation and commissioning of 11KV Disc Insulator 90 KN (B & S type) 347 Supply & fixing of11 KVDisc hard ware fittings (in pairs) 348 Supply installation and commissioning of HT Stay set with complete accesssories like Anchor rods, insulators, bow eye bolts and stay wires. Scope inclusive of supply of stay clamps. 349 Supply of materials and installation of pipe earth electrode made out of 40mm dia class B G.I. pipe of 3.0 metre long with arrangements for fitting/ terminationofG.I. flat / wire withG. I. nutbolts& washers including cost of charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCCcover complete with labour for excavation of pitinall kinds of soil & rock as required and as per direction of Engineer-in-charge. 350 Supply of materials and installation of chemical earthing size of chemical earth bar 3 mtr, size of earth pit 3 X 2 X 9 chemical compound to be used 50 kg. There is an arrangements forterminationofcopper strip of earth continuity conductor including cost of water pouring arrangements, brick masonary enclosure on top with removable cast iron cover complete with labour for excavation of pitinall kinds of soil & rock as required and as per direction of Engineer-in-charge. 351 Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required. 352 Supplying and laying 25 mm x 5mm G.I. strip on surface or in recess for connection etc as required. 353 Supply & fixing ofGInuts, bolts & washer of assoarted size for above work. 354 Supply installation and commissioning of 100 KVA, 11/0.4KV (AL) Transformer with tap changer, BIS Energy level-II with necessary hardware including unloading from truck, leading to the pole/plinth location and EMR test etc as required. 355 Supply & providing of 11K GI pin & pin insulators 356 Providing and binding with aluminium binding wire for all type binding for transformer installation work. 357 Supplying and painting with Aluminium Paint where ever required for transmission line. 358 Supplying and painting with Black paint where ever required for transmission line. 359 Supplying and painting with Redoxide paint where ever required for transmission line. 360 Supply installation and commissioning LT Distribution Panel Board for 100KVA Transformer with MCCB, Aluminium Busbar for two Bay with Kitkat Fuse. 361 Supply installation and commissioning LT Busing cover in the LT site of the transformer 362 Supply and construct with all material for Boundary wall for fencing and anti climbing with M.S. Gate 5-0 x 8-0.Sand & Gravel spreading over the entire area. 363 Supply and construct with all material for plinth of size 5-0x5-0x6-0. 364 11 KV Single Circuit line 365 Supplying and erection of 150X 150 RS joist pole of 11m long. (30.6 kg /mtr). 4 nos 366 Supply & fixing of(100 x 50 x 6)mm M.S Channel 367 Supply & fixing of11 KV V cross arm. 368 Supply & fixing of 11 KV top chanel.. 369 Supply & fixing of back clamp for cross arm 370 Supply & providing of 11K GI pin & pin insulators 371 Supply installation and commissioning of 11KV Disc Insulator 90 KN (B & S type) 372 Supply & fixing of11 KVDisc hard ware fittings (in pairs) 373 Supply installation and commissioning of HT Stay set with complete accesssories like Anchor rods, insulators, bow eye bolts and stay wires. Scope inclusive of supply of stay clamps. 374 Supply & installation of coil earthing 375 Supply & fixing ofassoarted nuts, bolts & washer for above work. 376 Providing and binding with aluminium binding wire for all type binding for transformer installation work. 377 Supply & stringing with 80mm² insulated AAA Conductor. 378 Supplying and painting with Aluminium Paint where ever required for transmission line. 379 Supplying and painting with Black paint where ever required for transmission line. 380 Supplying and painting with Redoxide paint where ever required for transmission line. 381 Garding 382 Supply & fixing of(75 x 40 x 6)mm M.S Channel 383 Supply & fixing of No 8 G.I wire 384 Supply & fixing ofeye hook 385 SAFETY EQUIPMENTS & OTHER: 386 Supply and hanging of Shock Treatment Chart duly Laminated. 387 Supply & Laying of 8 mm Thick Rubber Mat (1mtr x 2mtr), ISI mark of 1100 V Grade. 388 Supply and Installation of 4 Nos. Fire Buckets on a Mild Steel Stand complete as per specification and requirement of Fire Safety Provisions. 389 Supply and Installation of 4.5 Kgs. Capacity CO2 type Fire Extinguisher complete as required. 390 Providing and fixing bi-lingual Danger HT notice board of 250mmx200mm as specified below,made of mil;d steel at least 2mm thick & vitreous enamelled signal red color on both sides as background & with insprictions in enamelled vitreous white color on front side for lettering as required. 391 Supply of First Aid box with all required accessories. 392 EXTERNAL ILUMINATION 393 Feeder Panel with timer 394 Supply, delivery, installation, testing & commissioning of L.T. Indoor floor / wall mounted typeDistribution Board made out of 2 mm thick CR sheet metal cubiclewith front side hinges glass door for every meter compartment, the cabinet have a common bus bar, duly acid treated for derusting, primered and painted with 2 coats of enamel paint of approved shade; dust, damp & vermin proof powder coated; having hinged door and compartmental arrangement for eachequipment& busbar chamber onthe top of the panel; having provision for cable/ conduit entry, earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISSandasperspecial conditions of contract making good the damages caused complete as per the direction of Engineer-in-Charge. Incoming: 1 no 63A 4P MCCB (16 KA) type followed by 1 No 63-A 4 NO power contactor with Bypass Toggle switch & timer. Bus bars: 4 Nos.20x3mm E C Strips. Outgoing: 4 Nos 40/63-A, 4P MCB C (10kA). 4 nos 40/63 Amp 2P MCB C (10 KA).Complete duly factory wired as per SLD. Cable & wires 395 Junction Box 396 Supply, installation and testing ofCable Junction Boxes IP 66/67 “weather proof”, for outdoor installation with terminals, made of high quality Thermoplastic for cable size 10-16sqmm and box size 155mm x 210mm x 92mm (Hensel make or equivalent) 397 CABLES & ACCESSORIES 398 Supply, laying & testing of following size of PVC insulated, PVC sheathed, round armoured aluminium conductor power cable of 1100 volt grade laid on surface of wall / column / existing RCC / stone ware / masonry cable trench / cable trey / through G.I. pipe / hume pipe as the case may be, including cost of saddles / clamps / markers etc but excluding the cost of G. I. pipe / hume pipe complete with making good the damages caused and returning the balance unused cables to stores as required and as per direction of Engineer-in-charge. 399 3c x 2.5 Sq. mm flexible Copper cable for connection of lamp from JB 400 2c x 6 Sq. mm Aluminum armoured cable. 401 4c x 10 Sq. mm Aluminum armoured cable. 402 4c x 16 Sq. mm Aluminum armoured cable. 403 Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. 404 Supplying and fixing of following dia ISI marked HDPE pipe with material grade PE-80 in ground/recess including excavation the earthl and making good the same in case of recessed conduit as required. 405 40mm OD PN-8, 3 mm thick 406 90mm OD PN-4, 3.5 mm thick 407 110mm OD PN-4, 4.3 mm thick 408 Supply, delivery and laying of floowing sizes of RCC Hume pipe at a depth of 1000mm Ground level for cable laying as required including cost of all accessories, jointing, masonry inspection chamber at both ends etc completeas per direction of Engineer-in-charge. 409 150mm dia RCC Hume pipe 410 Fittings & Fixtures 411 Supply of 7meter long aesthetically designed QUADRA MAST light pole. Pole shall made up of Hot Dip Galvanized Body andcoated with zinc rich primer & pure polyester powder coatingand finished with jet black colour and 3 coat Marine grade. The pole shall be suitable for fitting of 4nos of 100W rectangular design street light made up ofExtruded aluminium body and Clear toughend glass diffuser. Dimension of light must be 607 x 200 x 230mm. Body size of the pole will □150mm from bottom and 100mm size from middle to top. The Pole shall have base Plate□300 x 16mm thick with provision for founation bolt fittings. Pole is Compatible for 70mm size for cable entry & exist. Junction Box service door is made up cast aluminium of size 325 X 90mm and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 4pole studd connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge.(Make: K -lite Pole KP-2042-700 + KL-4461 Luminaries/ equivalent ). 412 Supply of 3 meter long aesthetically designed decorative lighting pole with 400mm height Cast Aluminium base, cast aluminium ring on the middle portion. Pole shall be made up of Mild Steel Body and coated with zinc rich primer & pure polyester powder coating of black with gold embellishment finish. Bottom dia of the pole will be Ø139.7mm, Middle portion dia will be Ø76.1 mm and having base Plate of size □200 x12mm thick with provision for founation bolt. Pole is Compatible for Ø70mm size for cable entry & exist. Junction Box service door is made up cast aluminium and the control gear tray only is prewired with 2.5sq mm cable, 6A SP MCB and 32A 4pole terminal connector for loop-in loo-out arrangement with all materials & labour as required as per the direction of Engineer-in- Charge. (Make: K -lite Florian Pole KP- 4329/ equivalent). 413 Supply of 50W LED Post Top Light made up of Die Cast Aluminium base with spun aluminium top cover Body with clear Acrylic diffuser and having Dimension : Ø400 x 807 protected with IP 65, Surge Protection : 6KV, THD : <10% (Make: K -lite Imperial KL- 5444/ equivalent). 414 Supply, delivery, installation and testing of 4000mm long 100mm dia quadra extruded aluminium alloy pole with LED 45 watt post top light and foundation bolt and all fixing acessories with required size of rcc foundation as per direction of Engineer-in-charge. (K-Lite Pole cat noKP-5052, K-Lite Fitting cat no KL-5436 or equivalent),Pole made of extruded aluminium alloy (grade 6063) can achieve high strength and corrosion resistance in various atmospheric conditions, Pole design parameters vary depending on the type of bracket and loading factor, All pole sections are welded using special v groove technique by certified welders using high end MIG welding processes, The control gear tray is prewired with MCB, terminal connectors for loop-in / loop-out arrangement.Built-in control box with service Can be Integrated with LED Modules. door including lock and safety chain (except 200 x 50).Earth connection. Safety class I, CE-Conformity mark,BIS - Conformity mark. 415 Supply, delivery, installation and testing of 8w LED Bollard 100mm dia 1000mm long for uniform illumination for pathways with required size of cc foundation as per direction of Engineer-in-charge. (K-Lite cat no KL-4823/ Ligman/ Simes/ Unilamp/ equivalent). Luminaire made of extruded aluminium alloy (grade 6063) with die-cast aluminium components and non corrosive SS fasteners. Reflector system made of die-cast / spun aluminium. Non yellowing UV stabilized polycarbonate clear / translucent diffuser, Silicone gasket.Cast Iron / aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cast Iron / aluminium mounting plate with an anchorage unit made out of hot dip galvanised steel for extra guarantee against corrosion. Luminaire can be aligned on the mounting plate around 360°. Cable entries for through-wiring of mains supply cable. Protection class IP54 / IP65. Integral power supply. Earth connection. Safety class I. CE-Conformity mark. BIS - Conformity mark. Suitable for operation on 240V, 50Hz single phase ac supply.

BRR : 8124032 Additional Work, Alternation work, Pathway, Car Parking Work at the Office of District Drugs Control Office in Ground Floor of Paresh Building at Balurghat District Hospital Campus, Dakshin Dinajpur- 1 Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. 2 Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately)(a) Upto area 2.5 Sq.m 3 Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. 4 Taking out M.S. or W.I. Grills from wooden frame including cutting lugs from masonry wall and refitting the same and mending good damages after repairs. (Excluding the cost of necessary repair of damages) or doing any other necessary works 5 Brick work with 1st class bricks in cement mortar (1:4)(a) In superstructure ground floor. 6 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. 7 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:4 cement mortar(a) 15 mm thick plaster 8 Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile above 0.09 Sq.m(i) Other than colouired decorative including white. 9 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge.10-12 Micron thickness Annodizing filmNatural white 10 Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing filmI) Natural white(a) Moveable door shutter(i) Door frame (Top & sides) 11 (ii) ShutterTop Rail 12 Bottom Rail 13 Lock Rail 14 Door Vertical 15 Glazing clip 16 (b) Fixed partition(i) Top, bottom & side member 17 (ii) Intermediate member 18 (iii) Glazing clilp 19 Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:-(D) Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams, columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of theEngineer in charge.I) For partitions using section of size:a) 63.50 mm x 38.10 mm 20 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)(a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating) 21 Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.i) 6mm thick coloured / tinted / smoke glass. 22 Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. 23 Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface toreceive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly,complete as per manufacturers specification and as per direction of the EIC.In Ground Floor:(a) One Coat 24 Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat)a) Premium 100% Acrylic Emulsion 25 Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including costof all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line includingall specials. No separate payment will be made for accesories, specials.(a) For Exposed Work(i) CPVC Pipes Class-2, SDR-13.515mm dia 26 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Double Socketed 3 Meter Length(a) 110mm dia 27 (B) FITTINGS(i) Bend 87.5 degree(a) 110mm dia 28 Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials.(A) Under ground(i) 110 mm dia. 29 Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm woodblocks and C.I. brackets including two coats of painting of C.I. brackets.(i) 450 mm X 300 mm size 30 Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With P trap 31 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. 32 Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete.(a) E.W.C.(i) Plastic (hallow type) white 33 Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(i) 470 mm X 280 mm X 340 mm 34 Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.i) Polythene Flush Pipe 35 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(i) 450 mm long 36 Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass(i) 25 mm dia. and 450 mm long 37 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver redas per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 650 mm X 400 mm 38 Supplying, fitting and fixing soap holder.(a) PTMT (Prayag or equivalent) 39 Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 40 (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar 41 Supplying, fitting and fixing shower of approved brand and make.(a) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar orsimilar). 42 (b) (1) Chromium plated overhead Rain shower (Square), size-180x180mm with revolving joint (Model Code No. F7010501 of CERA or equivalent) 43 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed WorkPVC Pipes(Dia)50 mm 44 Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. 45 Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundation 46 Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity.(a) Fine sand. 47 Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. 48 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety 49 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety 50 Brick work with 1st class bricks in cement mortar (1:4)(a) In foundation and plinth 51 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(A) TOR STEEL/MILD STEELOlther than SAIL/TATA/RINL 52 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 53 Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately]. 54 M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.i) Grill weighing above 16 Kg./sq.mtr and above 55 M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.I) For structural members of specified sections weighing less than 22.5 Kg./m 56 Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised C clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc(I) 65 mm. x 65 mm. x 8 g. 57 Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concreteor cement grout as directed.(i) 16 mm dia bolt(a) 30mm long 58 (b) 450mm long. 59 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.i) For roof truss worksa) Span up to 12 Mtr 60 Supplying, fitting & fixing skin colour coated trapezoidal profile for wall, cladding, roof shall be made of 0.45 BMT (Base metal thickness)(0.50mm TCT(Total coated thickness excluding paint), G-550 (min 550 yield strength), of Zincalume metalic coating (IS15965) with high solar Reflective Index (SRI) vatue for better cooling as per thermatech technology, 1000-1015 mm effective cover width with five major corrugation, 28mm high rib spaced at 203mm c/c with subtle square fluting in the pan & the end rib shall have anti capillary grove & return leg etc. (i) in roof (a) With 0.5mm thick sheet. 61 Reparing collapsible gate by cutting out all rivets as necessary reassambling all members including welding pieces of channels, sraightening bent bars and rivetting with new rivets and fitting in position and painting two coats. 62 (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 63 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :With super gloss (hi-gloss) -(i) Two coats (with any shade except white) 64 Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame workand teak wood batten/Lipping]In Ground Floor(i) 12mm 65 (ii) 19mm 66 Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge. The rate includes the cost of labour, adhesive and all incidental charges thereof. In ground floorGlossy/Matt/Suede excluding surface texture or metallic lustre.(i) Thickness of laminate 1 mm 67 Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. 68 Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x 2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S. flats as collapsible bracings properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floors etc. and making good damages complete. 69 Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.(a) 35 mm thick shutters (single leaf) 70 (A) Supplying Godrej mortice lock chromium plated with keys 6 levers includingfitting & fixing complete 71 i) Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete.(a) Heavy type (I.S.I. size 3) 72 Add GST 18% (CGST @ 9% + SGST @ 9%) summasion sl. no.1 to 58 73 Add CESS @ 1% summasion sl no. 1 to 59.

BRR : 9493970 Tender For Place making work from Naja Market Novelty Square to Municipal Corporation office in Hazratganj - DISMANTLING WORK 2 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 3 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (in cement mortar) 5 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 6 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. (BITUMINOUS ROAD) 7 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. 8 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. 9 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge 10 CIVIL WORK 11 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil 12 Providing and laying 75 mm thick compacted bed of dry brick aggregate of 40 mm thick nominal size including spreading, well ramming, consolidating and grouting with jamuna sand, including finishing smooth etc. complete as per direction of Engineer-in-charge. 13 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 14 Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc for mass concrete 15 Providing & Laying Designer Pavers 100mm x 100mm with thickness ranging from 70-90mm of approved shape and complete as per direction of Engineer-in- Charge. including transport ,loading ,unloading and conveyance of material from available source to work site, including labour charges for fixing and pointing etc., complete 16 Sand FillingFilling in foundation trenches as per drawing and technical specifications clause 305.3.9 17 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) 18 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. 19 Cement mortar 1:3 (1 cement :3 coarse sand) 20 12 mm cement plaster of mix : 21 1:4 (1 cement: 4 coarse sand) 22 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 23 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 24 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer 25 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand): 25mm thick 26 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineerin-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 27 Supply and installation of 60 L: AUX Waste Bin of material Stainless Style with Contemporary Mounting: Root fixed, Surface/baseplate fixed, wall/post mounted with Features: Ashtray, complete with foundation as per the direction of the Engineer in charge 28 Providing and laying drain gratings on both sides of the road anlong with tree grating wherever required. 29 Drain Grating - FRP GRATING (DRAIN)SIZE: 366 x 1001 x 30 H MMTHICKNESS: 6/7 MM 30 Tree Grating - SIZE: 800 x 800 x 400 (Inner Dia’) MMTHICKNESS: 30 MM 31 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Size of Tile 600 x 1200 mm 32 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 33 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm dia 34 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications 35 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 36 Centering and shuttering including strutting, propping etc. and removal of form for : Walls 37 Steel in kg 38 Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. 39 For vertical surface two coats @ 0.70 kg per sqm per coat 40 For horizontal surface one coat @1.10 kg per sqm. 41 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineerin-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately). 12 mm thick one side Pre-laminated particle board (decorative lamination on oneside and other sides balancing lamination) grade -1, medium density flat pressed,three layer particle board FPT - I or graded wood particle board FPT-1 conformingto IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 andpre-laminated conforming to IS : 12823, Grade -1, Type II marked 42 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 450 mm dia 43 Boaring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS : 2800 part I, including collecting sample from different starta, preparing and submitting equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer In charge, up to 150 meter depth below ground level. 300 mm diaAll type of soil (DAR 23.2.1.1 based)Sanction Rate 44 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia 45 Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia having minimum wall thickness5.40 mm 46 Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm in the recharge pit, over the existing layer of boulders, in required thickness for all leads & lifts all complete as per direction of Engineer in charge. DAR 23.6 47 brick ballast 40 mm class 150 48 brick ballast 40 mm class 150 49 Providing & fixing sand stone Single piece ornamental bench of approved design pattern (1200x450x450MM) and specifications including, all materials, labour and T & Petc. required for proper completion of work as directed by engineer - in -charge 50 Supply and fixing of Bollard made from mid steel with CNC machine finishingwith 140mm outer diameter , thickness of 3mm r and 1100mm Height . Expose height 900mm from above Ground level and fixed the remaining 200mm below the GL. three number of circular rib of R06mm radius are provided at the top . The whole product is power coated black colour as per standard recommendation of Engineer. For fixing the Bollards with M10 cement concrete footing of minimum dimension 20cmx20cmx20cm,with base plate, anchor rods complete. 51 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 52 Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applyingHeat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee Support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. 53 Mandatory/ Regulatory sign boards of 900 mm diametrewith support length of 3750 mm 54 Providing and fixing StandAlone Signage in Marble of approved thickness with powder coated 10-12mm MS letters and illustration at desired locations with letters (in english, hindi and Braille)- etched, through cut, infilled or painted, also including the cost of design, fabrication and onsite installation with all the necessary accessories and equipments for fixing on any surface as per drawing and design approved from Architect in charge English: Helvetica Font with min. 36 size Hindi: Krutidev Fontwith min. 36 size, PSR 55 Signage-A Informative Signage of Sandstone/Marble of size (1200x2100)MMvisibly from both side, PSR 56 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab except colour of Black, Cherry/Ruby Red or equivalent 57 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent 58 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. 59 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. 60 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 61 Supplying, fixing and commissioning of Hydraulic (Retractable) Bollards as per specification 62 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 63 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 64 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 65 Labour rate for the mentioned item. Supply & fixing of 6 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with Double arm bracket 1 Mtr length in 1:2:4 RCC foundationbolt including the cost of foundation, excavation & back filling and Required T&P completee in all respect. 66 Providing & fixing ofConcrete Drain Covers Sandstone Colour550X750X50MM Colour: Sandstone Ultra High Performance Pigmented Concrete With Steel Fiber Reinforcement Load Capacity Suitable for 10 Tonne Pigmented Concrete Bayferrox Lanxess Fe203 Colour Index 77491.0000etc all complete in direction of engineer in charge 67 Providing & fixing of Concrete drain cover Concrete Drain Covers Sandstone Colour 550X750X50MM Ultra High Performance Pigmented Concrete With Steel Fiber Reinforcement Load Capacity Suitable for 40 Tonne Vehicle Passing Bayferrox Lanxess Fe203 Colour Index 77491.0000 etc all complete in direction of engineer in charge 68 Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fastenersat both ends. The work shall be executed as perdrawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job.The barricading shall not be removed without prior approval of Engineerin- Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). 69 PLUMBING OF AREA- HAZRATGANJ NAJA MARKET ROAD, PLAZA, CHAURAHA, TRILOKNATH ROAD , CAPPER ROAD, DR. SOUJA ROAD, DAYNIDHAN ROAD - PLACEMAKING AND REDEVELOPMENT 70 SANITARY FIXTURES & ACCESSORIES 71 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. 72 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White 73 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require 74 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap 75 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 76 32 mm dia (for wash basin) 77 Providing & Fixing 600 X 450 mm bevelled edge mirror of superiorglass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 78 Providing & fixingtoilet paper holder. C.P. Brass 79 WATER SUPPLY PIPES AND FITTINGS 80 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. 81 Internal work exposed on wall 82 40mm nominal outer dia pipes 83 50mm nominal outer dia pipes 84 Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, havingthermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. 85 Concealed work including cutting chase and making good the wall etc. 86 15mm nominal outer dia pipes 87 20mm nominal outer dia pipes 88 25mm nominal outer dia pipes 89 32mm nominal outer dia pipes 90 Providing & fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 91 40 mm nominal bore 92 50 mm nominal bore 93 Providing&fixing15 mm nominal bore45 cm long unplasticised PVC connection pipewith brass unions.45 cm length: 15mm nominal bore 94 Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality conformingtoIS 8931. 95 Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved qualityconforming to IS standardsandweighing notlessthan 810 gms. 96 Providing & fixing 15 mm nominal bore C.P. brassstop cock (concealed)of standard designandof approvedmakeconforming to IS : 8931. 97 Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conformingto IS8931. 98 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 99 Constructing brick masonry chamber 300 x 300x500mm, insidewithF.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for StopCock, withC. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundationconcrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar1 : 3 (1 cement : 3 coarse sand )12mmthick finished with a floatingcoatof neat cementcomplete as per standard design 100 Providing and fixing square mouthS. W. Gully trapgrade `A complete with C.I. gratingbrickmasonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 101 150 x 100 mm. size P type 102 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms 103 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 104 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 105 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confirming to IS:15801 UV stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply, including all PP - R plain & brass threaded polypropylene random fittings, including trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. 106 PN - 10 Pipe, 50 mm OD (SDR-11) 107 PN - 10 Pipe, 75 mm OD (SDR-11) 108 PN - 10 Pipe, 110 mm OD (SDR-11) 109 TOTAL ( SCHEDULED ITEM ) 110 PART B(NON SCHEDULED ITEMS - AS PER MARKET RATES) 111 SUPPLYOFSANITARY FIXTURES, ACCESSORIESANDBATHROOMFITTINGS 112 Providing & fixing of white vitreous china urinal partition for half stall urinals. (Jaquar or equivalent) 113 Providing & fixing UPVC Floor trap of self cleansing designwith CP Jalicomplete in all respects. (Make : Supreme / Finolex / Prince) 114 P-Trap type Floor Trap 110 x 75 mm 115 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. 116 Providing & fixing 50 mm. dia. G.I elbow (drain point) in the toilet floor including50 mm dia. C.P. waste jali complete as required. 117 C. INTERNAL ELECTRICAL WORKS -HAZRATGANJ NAJA MARKET ROAD, PLAZA, CHAURAHA, TRILOKNATH ROAD , CAPPER ROAD, DR. SOUJA ROAD, DAYNIDHAN ROAD - PLACEMAKING AND REDEVELOPMENT 118 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 119 Group A 120 Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required 121 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 122 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 123 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 124 2 X 16 sq. mm + 1 X 6 sq. mm earth wire 125 Supply and drawing co-axal TV cable RG-6 Grade, 07 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PCV sheath in the axisting surface/recessed steel/PVC conduite as required. 126 1 Pair, 0.5mm dia annealed copper conductor, FRLS PVC insulated, unarmoured, Telephone cable 127 Supplying and fixing following Suitable size GI Box with Moudular plate and cover infront on surface or recess, including providing and fixing 2 nos 3 pin 5/6 A moduler socket outlet and 2 nos. 5/6 A moduler switch, connection etc. as required. ( for light pluges to be used in non residentions, painting etc. as required. 128 Supplying and fixing following Suitable size GI Box with Moudular plat and cover infront on surface or recess, including providing and fixing 25 A moduler socket outlet and 25 A moduler SP MCB C Curve including connections, painting etc. as required. 129 Supplying and fixing PVC batten/ angle holder including connections etc as required. 130 Supply and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 131 5/6 A Switch 132 2 way 5/6 A switch 133 Telephone socket outlet 134 TV Antenna socket outlet 135 Bell Push 136 Supplying and fixing following size/ modules, GI box along withmodular base & cover plate for modular switches in recess etc as required. 137 1 or 2 Module (75mmX75mm) 138 3 Module 100mmX75mm) 139 4 Module 125mmX75mm) 140 6 Module 200mmX75mm) 141 8 Module 125mmX125mm) 142 12 Module 200mmX150mm) 143 Supplying and fixing following modular base & cover plate on existing moduler metal boxes etc. as required. 144 1 or 2 Module 145 3 Module 146 4 Module 147 6 Module 148 8 Module 149 12 Module 150 Supplying and fixing of following sizes of pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 151 25mm 152 32mm 153 Supply, installation, testing and commissioning of 1200mm sweep, BEE 5 Star rated, ceiling fan with brush less direct current (BLDC) Motor, class of insulation: B, 3 nos. Blades 30cm long down rod, 2 nos, canopies shackle kit, safety rope, copper winding, power factor not less than 0.9 service value (CM/M/W) Minimum 6.00, air delivery minimus 210 cm/min 350 rpm (tolerance as per IS:374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washer, temperaure rise = 75Degree C (max.), insulation resistance more than 2 mega ohm, Suitable for 230 V, 50Hz single phase AC supply, earthing etc. Complete as required. 154 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as 155 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. asrequired. 156 Supply and fixing call bell/Buzzer suitable for single phase,230V, Complete as required. 157 Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. 158 Supplying and fixing following way, Horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator) 159 4 way(4+12) , Double door 160 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 161 16 way , Double door 162 Supply andfixing following rating, double pole, 240 V isolator in the existing MCB DB complete with connection, testing and commissioning etc. as required. 163 40 A 164 Supply andfixing following rating, four pole, 415 V isolator in the existing MCB DB complete with connection, testing and commissioning etc. as required. 165 63 A 166 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 167 Single Pole 168 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 169 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe et 170 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as 171 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 172 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 173 PART B - NON - SCHEDULED ITEMS (AS PER MARKET RATES ) 174 Supply & erection of AC 230/250 volts 50 hz Exhaust fans including provding nut bolts mounting frame and other accessories including connection etc complete as required as per direction of E /I make:- Havells / Cromption / USHA 175 300 mm Sweep 900 RPM 176 Supply & fixing of following white RJ 45 cat 6 data outlet / information outlet ETL verified to meet exceed TIA / ETA 177 Supply & fixing of following Telephone outlet 178 Supply & installation of CCTV / Suvillance system. (Honeywell 20 channel NVR full HD IP based- 01 nos, IP Honeywell dome camera 2MP with night vision- 8 nos., IP Honeywell 2 MP HD Bullet camera with night vision- 8 nos.) 179 Supply of LED Tube Light with batten suitable for up to 1X22 watt LED tube light fitting complete, including tube on surface complete in all respect. 180 1 X 22 W 181 Supply ofrecess/Surface/Pendent mounting round 12 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects. (Make: Wipro) 182 LED Fancy Gate Light, Aluminium, 12 W 183 Earth work in excavation bymechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in charge.All kinds of soil 184 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5kmalso includingrammingandwateringoftheearthinlayersnot exceeding20cmintrenches,plinth,sidesoffoundationetc.complete. 185 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 186 Providingandlayinginpositioncementconcreteofspecified grade excluding the cost of centering and shuttering - All work uptoplinthlevel:1:3:6(1Cement:3coarsesand(zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) 187 Brick work with common burnt clay F.P.S. (non modular) bricks of class -150 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) 188 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland/Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in- charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mixor bear the cost of extra cement. M-25 Grade Concrete 189 SteelreinforcementforR.C.C.workincludingstraightening, cutting,bending,placinginpositionandbindingallcomplete Thermo-Mechanically Treated bars of grade Fe-500D or more 190 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 191 Providingandapplyingwhitecementbasedputtyofaverage thickness1 mm, of approved brandand manufacturer,over the plasteredwallsurfacetopreparethesurfaceevenandsmooth 192 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied@ 2.20kg/10 sqm 193 ProvidingandlayingfactorymadechamferededgeCement Concretepaverblocksin footpath, parks,lawns, driveways or light trafficparking etc,of requiredstrength, thickness& size/ shape, made by table vibratory method using PU mould, laid in requiredcolour&patternover50mmthickcompactedbedof sand, compacting and proper embedding/laying of inter locking paverblocksintothesandbeddinglayerthroughvibratory compactionby usingplatevibrator,fillingthe jointswithsand andcuttingofpaverblocksasperrequiredsizeandpattern, finishing and sweeping extra sand. complete all as per directionof Engineer-in-Charge. 194 60mm thick cement concrete paver block of M-35 gradewith approved colour, design & pattern (Square and Rectangular shape) 195 80mmthickC.C.paverblockofM-35gradewithapproved color design and pattern.(Square and Rectangular shape) 196 Providing and laying matt finished vitrified tile of size 100x100x16mmhavingwaterabsorptionlessthan0.5%and conformingtoIS:15622ofapprovedmakeinallcoloursand shadesinoutdoorfloorssuchasfootpath,courtyardmulti modelsetc.,laidon20mmthickbaseofcementmortar1:4 (1cement:4coarsesand)inallshapes&patternsincluding groutingthejointswithwhitecementmixedwithmatching pigments etc. complete as direction of Engineer-in-Charge. 197 Providingandlayinginpositonreadymixedorsitebatched design mix cement concrete for reinforcedcement concrete work; using coarse aggregate and aggregate derived from natural sources,PortlandPozzolana/OrdinaryPortland/PortlandSlag cement,admixtures in recommended proportons as per IS:9103 to accelerate / retard sieving of concrete, to improve durability and workabilitywithoutimpairingstrength;includingpumpingof concretetositeoflaying,curing,carriageforallleads;but excludingthecostofcentering,shufering,fnishing andreinforcementasperdirectonoftheengineer-in-charge;for the following grades of concrete.Note: Extra cement up to 10% of the minimumspecified cement content in design mix shall be payableseparately.Incasethecementcontentindesignmix ismore than 110% of the specified minimum cementcontent, the contractor shall have discreton to eitherre-design the mix or bear the costofextracementConcreteofM25gradewithminimum cement contentof 330 kg /cumOne CubicMetreConcrete of M30 grade with minimum cement contentof 350 kg /cumOne CubicMetreConcrete of M35 grade with minimum cement contentof370kg/cumOneCubicMetreConcreteofM40grade with minimum cement contentof 390 kg /cumOne CubicMetreConcrete of M50 198 Concrete of M30 grade with minimum cement contentof 350 kg 199 Applying stamping finsh of the top surface of freshlylaid plain / reinforced cement concrete of specifedgrade in portco, side walks, drive ways, pool decks andopen yard as per directon of the Engineer-in-Charge.* The concrete shall be placed and screened to thefnished grade and •oated to the uniform surface byusing standard fnishing techniques. approved colorhardener @2.7 kg/sqm shall be applied evenly to thesurface of the fresh concrete by the dry shake methodby sprinkling in twoor more shakes foated aer eachshake and trowel only after final coating. The approved released agent @ 0.113 Kg/Sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the fexiblepolyurethene stamp moulds of approved design and inrequired sizes to achieve fnal stamping pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufcient size and weight to leave properstamp marks and the process repeated for the remaining concrete surface till the whole surface to bestamped is completed within the time while the concrete is in plastic stage of setting.After stamping, the curing shall be done as permanufacturers specifcatons. After inital curing theimprinted joints shall be grouted using cement slurrymixed with color hardener as per the requirement. Thesurface shall be sealed by applying acrylic based sealernot less than 0.167 litre/Sqm on fnished surf The constructon joints shall be provided by grovecutting of size 4 mm x 20 mm in panel size 3 m x 3 m orlesser as per the site conditons and flling the samewith 10 mm baker rod and providing & laying (PU)Polyurethane based joint sealer of approved make asper manufacturer’s specifcatons and fnished byapplying polyurethene resin based topprotectve clearcoat of minimum 80 micron applied with rollers onproperly cured and dry clean surface. (The cost ofconcrete for flooring is not included in the item, whichshall be paid for seperately).One SquareMetreSupplying and laying of Uni-Axial Woven PolysterGeogrid conforming to MORTH 3100 and IRC113, as soilreinforcement/basal reinforcement includingaccessories like te-strips, nuts & bolts and loops/lugsfor joining reinforcing elements with the facia pannels,overlaps and other protectve elements for synthetcgeo-grids and all other actvites required for reinforcedsoil walls, slopes etc complete as per designrequirements, manufacturer specifcatons and as perdirecton of engineer-in- charge.Uni Axial Woven polyster geogrid of minimum tensilestrength 40KN/m in the Longitudinal directon and 20KN/m in the Transverse directon.One SquareMetre 200 62mmthickcementconcreteflooringwithconcretehardener topping,underlayer50mmthickcementconcrete1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)andtoplayer12mmthickcementhardenerconsistingof mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’sspecifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 201 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 202 Supplying & Laying of Precast Saucer Drain 150 thick 300 mm wideinluding sand bed etc all complete in direction of engineer in charge 203 Providing and laying at or near ground level factory made kerb stone of M- 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 204 Providing, laying and making kerbchannel 30cm wide and 50 mm thick with cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the topsmoothetc.completeandasperdirectionofEngineer-in- 205 Providing and laying 500x500x40 mm thick Turf paver (Turfpave XD) on 150 mm thick sub grade of compacted bed of 20 mm thick nominal size stone aggregate and base course and fillingwith150mmthickjamunasand,includingspreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. 206 Providing andfixing10x10x10cmGranitestoneblockhandcut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mmwidefilledwithsamemortarincludingruledpointingetc. complete as per direction of engineer-in-charge. 207 Providing and laying Polished Granite stone flooring in required design and patterns,inlinearas wellas curvilinearportionsof the building all complete as per the architectural drawings with 18mmthickstoneslabover20mm(average)thickbaseof cementmortar1:4(1cement:4coarsesand)laidandjointed with cement slurry and pointing with white cement slurry admixedwithpigmentofmatchingshadeincludingrubbing, curingandpolishingetc. all completeas specified andas directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent 208 ProvidingandlayingflamedfinishGranitestoneflooringin requireddesignandpatterns,inlinearaswellascurvilinear portionsofthebuildingallcompleteasperthearchitectural drawingswith18mmthickstoneslabover20mm(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointedwith cementslurry and pointing withwhite cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and asdirectedbytheEngineer-in-Charge:Flamedfinishgranite stoneslabJetBlack,CherryRed,EliteBrown,CatEyeor equivalent 209 Painting runway/taxi track/apron marking with adequatenos of coats to give uniform finish with road marking paint of superior makeasapprovedbytheEngineer-in-charge,i/ccleaningthe surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete.New work (Two or more coats) 210 Layingoldcementcocreteinterlockingpaverblocksofany design/shapelaidin requiredline,level,curvature,colourand pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer in-charge. (Old CC paver blocksshall be supplied by the department free of cost). 211 Layingatorneargroundleveloldkerbstonesofalltypesin positiontotherequiredline,levelandcurvature,jointedwith cement mortar 1:3 (1 cement : 3 coarse sand), including making jointswithorwithoutgrooves(thicknessofjoints,exceptat sharpcurve,shallnotbemorethan5mm),includingmaking drainage opening wherever required etc. complete as per direction of Engineer-in-charge. (Length of finished kerb edging shallbemeasuredforpayment).(Oldkerbstonesshallbe supplied by the department free of cost) 212 Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fastenersat both ends. The work shall be executed as perdrawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job.The barricading shall not be removed without prior approval of Engineerin- Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work). 213 Centeringandshutteringincludingstrutting,proppingetc.andremoval of form for 214 Walls(anythickness)includingattachedpilasters,butteresses,plinth and string courses etc. 215 Providing&fixingofcementconcreteBollardsM-30GradeR.C.C.150mmdiaincludinggoutinginfoundation750mm height including all necessary T&P etc all complete in directio of 216 Repairing of Existing Canopy including PPGL Sheet & necessarymember &Screw,nut, bolts,washer ,including paintingpolishingetcallcompleteindirectionofengineerin charge. 217 Boring/drillingborewellofrequireddia for casing/ strainer pipe, by suitable methodprescribedinIS:2800(partI), including collecting samples from different strata, preparing and submitting stratachart/borelog,includinghire& running charges of all equipments, tools, plants&machineriesrequiredforthe job, all complete as per direction of Engineer-in-charge,upto90metredepth below ground level. 218 300 mm dia 219 Supplying, assembling, lowering and fixinginverticalpositioninborewell, unplasticizedPVCmediumwellcasing (CM) pipe of required dia, conforming to IS:12818,includingrequiredhireand labourcharges,fittings&accessories etc.allcomplete,foralldepths,asper direction of Engineer -in-charge. 220 150 mm nominal size dia 221 Supplying, assembling, lowering and fixinginverticalpositioninborewell unplasticizedPVCmediumwellscreen (RMS) pipes with ribs, conforming to IS: 12818, includinghire & labour charges, fittings&accessoriesetc.allcomplete, for all depths, as per direction ofEngineer-in-charge. 222 150 mm nominal size dia 223 Gravelpackingintubewellconstruction inaccordancewithIS:4097,including providing gravel fine/ medium/ coarse, in requiredgrading&sizesasperactual requirement,allcompleteasper direction of Engineer-in-charge. 224 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit) 225 withrequiredcapacityaircompressor, running the compressor for required timetill wellis fullydeveloped, measuringyieldofwellby“V”notch methodorany otherapprovedmethod, measuring static level & draw down etc. bystepdrawdownmethod,collecting water samples & getting tested in approvedlaboratory,i/cdisinfectionof tubewell,allcomplete,includinghire& labourchargesofaircompressor,tools & accessories etc., all as per requirement and direction of Engineer-incharge. 226 Providingandfixingsuitablesize threadedmildsteelcaporspotwelded platetothetopofborewellhousing/ casing pipe, removable as per requirement, all complete for borewell of 227 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 150 mm 228 ProvidingandfixingBailplug/Bottom plug of required dia to the bottom of pipe assemblyoftubewellasperIS:2800 (part I). 150 mm dia. 229 Supplyofsubmersiblepumpofmake KSB / Crompton / kirloskar 7.5HP with control panel, support wire etc. 230 Supply and laying of aluminium conductorPVCinsulatedarmoured served sheathed cables 1100 Volts grade ata depth of 750 mm below groundleveloveracushionof75mm. thick sand all around and protectedwithburntbricksonsidesandontop. Onsurfacethecablerunshallbe fixed onM.S.clampsetc.ofsuitablesizeor asdirectedbytheEngineer-Incharge, complete in allrespect. The armouring of the cable shallbeproperly connectedwiththe earthonductor by clamps etc.submersibble cable from pump panel to 231 Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc. 32 mm dia nominal bore 232 Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) 233 Supply of 100mm dia Johnson screen. 234 Providing and stacking of Nyctanthes arbor- tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer- 235 Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. 236 Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of 237 Providing and stacking of Ficus panda of height 90-105cm.with10-12branchesandhealthy foliage,wellformedincementpotsofsize30 cm as per direction of the officer-in-charge.. 238 Providing and stacking of Ficus reginald well branched, bushy of height 60-75 cm. in earthen pots of size 25 cm as per direction of the officer- 239 Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushtyshape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.. 240 Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 241 Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size ofPoly bags & as per direction of the officer-in- 242 Providing and stacking of Asparagus sprengeri of height 15 cm to 20 cm, full of leafy branches in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge.. 243 Providing and stacking of Ophiopogon jaburan ( variegated ), full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 244 Providing and displaying of Croton Petra Bangalore variety having ht. 60 cm to 75 cm with 4 to 6 branches, well developed, fresh and healthy colorful leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer- 245 Making tree guard 53 cm dia and 1.3 m high as per design from empty coal tar drums, supplied free by the department, including providing and fixing 2 nos M.S. sheet rings 50 x 0.5 mm fixed withrivetscompleteinallrespectsincluding painting inside and outside of tree guard with: Two or more coats of synthetic enamel paint of approved quality shade over a priming coat 246 Trenching in ordinary soil up to required depth includingremovalandstackingofserviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clodsetc.andmakingthetrenchedareawith designedmounds,pathsandsittingspacesetc. toproperlevelsbyfillingwithearthorearth mixed with manure and properly watering completeworkinrequiredtopographyasperdrawing & specifications. 247 Supplyingandstackingofgoodearthatsite includingroyaltybutincludingcarriage 20 km (earthmeasusredinstackswillbereducedby 248 Supplyingandstackingatsitedumpmanure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment) 249 Mixing earth and manure in specified proportion or as directed. 250 Roughdressingthetrenchedgroundincluding breaking the clods. 251 Fine dressing the ground 252 Spreadingof mixedgoodearthandmanurein specifiedproportionsasaboveandinrequired thickness. 253 Providing&layingSelectionno.1grassturf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothenandlightwateringthesame,asperdirection of officer in charge 254 Preparation of mounds of various size and shape by available excavated / supplied earth in layers notexceeding20cmindepth,breakingclods, wateringofeachlayer,dressing etc.,leadupto 50meterandliftupto1.5mcompleteasper direction of Officer-in-charge. 255 Excavating,supplying andfilling oflocal earth (including royalty) by mechanical transport upto a lead of 5km alsoincluding rammingand watering of the earth in layers not exceeding 20 cm in trenches, plinth, 256 Providing & Laying reinforced cement concrete pipe NP3 for Planter 600mm height and 300 mm depth in ground including excavation, protection work, backfilling, concrete and masonary works all complete in direction of engineer in charge. 257 Fabrication , supply and installation of Stainless steel 304 grade canopy around the existing tree guard with laser cut SS -304 grade fins with satin finish and 10mm thick polycarbonate multiwall sheet on roof from sabic plastic products or equivalent complete in all respect along with it aluminum fittings . SS-304 grade tree grate with laser cut design cutout patterns for waterpenetration will be fixed at the center and 18mm thick gang saw cut mirror polished granite/wood plastic composite wooden planks will be fixed ontop of the existing masionary in a curve shape 258 Cement Concrete Planter 259 D & E .( HORTICULTURE AND EXTERNAL ELECTRICAL WORK)-HAZRATGANJ NAJA MARKET ROAD, PLAZA, CHAURAHA, TRILOKNATH ROAD , CAPPER ROAD, DR. SOUJA ROAD, DAYNIDHAN ROAD - PLACEMAKING AND REDEVELOPMENT BILL OF QUANTITY 260 Part G (Horticulture Work) 261 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 262 Supplying and stacking of good earth at site including royalty and carriage upto 20 km lead complete (earth measured in stacks will be reduced by 20% for payment). Analysed Rate. 263 Extra For levelling and neatly dressing of disposed soil completely as per the engineer in charge DSR2023; 2.36 264 Supply and laying of bi axial extruded high modulus polypropylene geo grid conforming to MORTH specifications for base/sub base reinforcement having minimum tensile strength 40 Kn.m IN THE LONGITUDNAL AND TRANSEVERSE DIRESTION, WITH 14 Kn/ M AND 28 Kn/M AND 28 Kn/M TENSILE STRENTGH at 2% and 5 % strain respectively in the longitudnal and transverse direstion, junction eficiency not less than 95% and with 38 mmx 38 mm mesh opening psrLDA Approved 265 Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).DSR Horticulture 2020; 2.25 266 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge DSR Horticulture 2020; 2.9 267 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).DSR Horticulture 2020; 2.8 268 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, byspreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).DSR Horticulture 2020; 2.1 269 Rough dressing the trenched ground including breaking clods.DSR Horticulture 2020; 2.6 270 Fine dressing of the ground., DSR Horticulture 2020; 2.7 271 Providing & laying Selection no. 1 doob grass turf with earth 50mm to60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge DSR Horticulture 2020; 2.34 272 Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately): In rows 5 cm apart in both directions DSR Horticulture 2020/ 2.10.1 273 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)Holes 60 cm dia, and 60 cm deep. DSR Horticulture 2020; 2.14.4 274 Holes 45 cm dia, and 45 cm deep., DSR Horticulture 2020; 2.14.5 275 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal ofunserveiceable material’s as per direction of officer in charge (excludingcast of plant & water). DSR Horticulture 2020; 2.57 276 Trees Plant, 2.57.1 277 Shrubs Plant, 2.57.2 278 Hedge Plant, 2.57.3 279 Providing and stacking of Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge., DSR Horticulture 2020; 6.7 280 Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge., DSR Horticulture 2020; 5.3 281 Providing and stacking of Gardenia jasminoides of height 45-60 cm. with 3-4 branches in earthen pots of size 20 cm as per direction of the officer-in-charge., DSR Horticulture 2020; 8.30 282 Providing and stacking Jasmine grandiflorum (chameli) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. DSR Horticulture 2020; 9.8 283 Providing and stacking of Belamcanda chinensis of height 45-60 cm. branched in earthen pots of size 20 cm as per direction of the officer-in-charge. (Lepord lily), PSR LALBATTI 284 Providing and Displaying of Spathiphyllum (peace lily), having 15 cm to 25 cm ht. blooming stag with fresh & healthy foliage well developed in 15 cmof Earthen pot/plastic pot as per direction of officer-in-charge. DSR Horticulture 2020; 3.90 285 Providing and stacking of Syngonium (Butterfly) variegated with 2-3 suckers healthy foliagein Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge., DSR Horticulture 2020; 6.25 286 Shrubs/TREE Plant 287 Providing and stacking of Hamelia patens of height 60-75 cm. with 6-8 branches in poly bags of size 25 cm as per direction of the officer-in-charge.(DAR 2020 Hort - 8.32) based 288 Providing and stacking of Ficus panda of height 90-105 cm. with 10-12branches and healthy foliage, well formed in cement pots of size 30 cm asper direction of the officer-in-charge. (DAR 2020 Hort - 8.28) based 289 Trees Plant 290 Providing and stacking of Jacaranda mimosifolia of height 10-12 feetin big poly bags of size 18 as per direction of the officer-in-charge.PSR 291 Providing and stacking of Butea frondosa (Flame of Forest) healthy and multi branches of height 4-6 feet in big poly bags of size 18 as per direction of the officer-in-charge.PSR 292 Providing and stacking of Lagerstroemia Flaush (jarool) healthy and multi branches of ht.10-12 feet in Earthen pots of size 12 as per direction of the officer-in-charge. PSR 293 Providing and stacking of Tabebiua (Dolne smith) healthy and multi branches of ht.12-14 feet in Earthen pots of size 18 as per direction of the officer-in-charge. PSR 294 Providing and stacking of Terminalia Mentali healthy and multi branches of height 10-12. in big polybags of size 18 as per direction of the officer-in-charge. PSR 295 Providing and stacking of Plumeria alba healthy and multi branches of height 10-12 feet in big poly bags of size 18 as per direction of the officer-in-charge.PSR 296 Providing and stacking Nicodia of height6-8 feet with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge.PSR 297 Providing and stacking Cassia Gluca of height 8-10 feetwith bushy healthy plant in 14 bags & as per direction of the officer-in-charge. PSR 298 Providing and displaying of Phoenix palm plant, having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.PSR 299 Supply and installation ofBamboo of Height 10-12 feet. In all work complete. Market RatePSR 300 (Irrigation) 301 Trenching and Back Filling. Sanctioned Rate. 302 Supply, Installation, laying & commissioning of 90 mm outer dia 6Kg/cm2 HDPE pipe. 33.01 (Jal Nigam Varanasi SOR) 303 Supply, Installation, laying & commissioning of 63 mm outer dia 6Kg/cm2 HDPE pipe. 33.01 (Jal Nigam Varanasi SOR) 304 Supply, Installation, laying & commissioning of HDPE Flange with tail piece, packing & nut bolt complete in all respect. Sanctioned rate 305 Supply, Installation, laying & commissioning Of reducer 90 mm to 63 mm outer dia 6Kg/cm2 HDPE pipe. Sanctioned rate 306 Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 90 mm HDPE pipe. Sanctioned rate 307 Supply, Installation, laying & commissioning Of ELBOW JOINT 90 DEGREE FOR 63 mm HDPE pipe. Sanctioned rate 308 Supply, Installation, laying & commissioning Of TEE JOINT90 DEGREE FOR 90 mm HDPE pipe. Sanctioned rate 309 Supply, Installation, laying & commissioning Of TEE JOINT90 DEGREE FOR 63 mm HDPE pipe. Sanctioned rate 310 Supply, Installation, laying & commissioning Offor 63 mm TAIL PIECES. Market Rate 311 Supply, Installation, laying & commissioning of for 90 mm TAIL PIECES HDPE PIPES. Market Rate 312 Supply, Installation, laying & commissioning Of PRESSURE Gauge 2.5 size (Gyceryne). Market Rate 313 3 disc filter. Market Rate 314 2 disc filter. Market Rate 315 Thermos Temperature Controller wuth switch and socket .2 mm cable. Market Rate 316 Butt velding electric heating plate. Market Rate 317 3 CIbutterfly valve. Market Rate 318 2 CIbutterfly valve. Market Rate 319 SPRINKLERS 320 Supply, Installation, laying & commissioning of Service Saddle 3 inch x 1.25 inch. Sanctioned rate with bush 321 Supply, Installation, laying & commissioning of Service Saddle 2 inch x 1.25 inch. Sanctioned rate with bush 322 Supply, Installation, laying & commissioning of Swing Joint for 10 - 12 meter range 360 degree popup. Market Rate 323 Supply, Installation, laying & commissioning of Swing Joint for 3 - 4 meter range 360 degree popup. Market Rate 324 Supply, Installation, laying & commissioning of 25 mm outer dia 6Kg/cm2 CPVC pipe. Market Rate 325 Supply, Installation, laying & commissioning Of Ball Valve for 25 mm pipes. Market Rate 326 Supply, Installation & commissioning of pop sprinkler plastic make material with 3 - 4 meter range 360 degreesMR 327 Supply, Installation & commissioning of pop sprinkler plastic make material with 10- 12meter range 360 degrees. Market Rate 328 Engagement of Plumber for required work etc all complete as per direction of Engineer in charge. PWD SOR 2020-21/Labour Rates Chapter.Rs. 420.00+10%CP 329 Engagement of Labour for required work etc all complete as per direction of Engineer in charge. PWD SOR 2020-21/Labour Rates Chapter.Rs. 335.00+10%CP 330 4 - BORING 331 Boaring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS : 2800 part I, including collecting sample from different starta, preparing and submitting equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer In charge, up to 150 meter depth below ground level. 300 mm diaAll type of soil (DAR 23.2.1.1 based)Sanction Rate 332 Supply, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS: 12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer in charge. 200 mm nominal size diaDAR No. 23.3.3 333 Supply, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer in charge. 200 mm nominal size diaDAR No. 23.10.3 334 Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm in the recharge pit, over the existing layer of boulders, in required thickness for all leads & lifts all complete as per direction of Engineer in charge. DAR 23.6 335 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for bore well of: 200 mm dia. DAR No. 23.13.3 336 Providing & Fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS 2800 part - 1 including necessary bolts & nuts of required size complete. 200 mm clamp. DAR No. 23.14.3 337 Supply and fixing of pump set & composite electric panel for submersible kirloskar/ sons/ crompton openwell pumpset greeves make three phases 380-440 v 50 cycles supply with fountain bolts and 3 core 2.5 mm flat PVC flexible copper conductor double insulated submersible cable and 4 core 1.5 mm form fountain pool to fountain electric panel etc fountain pool to fountain electric panel etc. complete with internal wiring lighting system. 338 7.5 HP pump 339 Electric Panel Box 340 Supply and fixing of 3 HP single phase open well submersible pump set of 50 mm x 50 mm pipe size complete with all material, labour T&P etc all as per direction of Engineer in charge. (make kirloskar/ crompton/ KSB 341 Supply and fixing of 2.5 sqmm 3 core PVC insulated PVC shethed flate submersible cable pump with bare bunched copper conductor for submersible pump motor with 1100 volt grade ISI marked all complete as per direction of Engineer in charge.Sanctioned Rate 342 Arrangement of Plumber for 1 year maintenance. PWD SOR 2020-21 343 Horticulture Maintenance 24 months 344 Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hedge, flower beds, foliages, creepers etc. including hoeing,weeding pruning replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter , removal of garden waste, applying insecticide, pesticide & fertilizers (whenever required) top dressing of lawn with good earth and menure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide , Pesticide will be provided by the Department & lawn mover and brush cutter with fuel , other T & P material/articles shall be provided by the contractor.) Play grounds / Public parks Per Sqm (as per yard stick 1Mali =2.00Acre).DSR (Hort) 2020/2.40.5 345 Cutting of Hedge/Edge including removing of cut material, cleaning, hoeing of hedge/ edge bed watering, manureing & apply insecticides & fungicides etc. (excluding the cost of material which shall be supplied by the department) and as per direction of officer in charge.DSR20202.2.36 346 Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 05 k.m. lead complete (cattle manure measured in stacks will reduced by 8% for Payment). DSR 2020 horti - 2.25 347 Supplying and stacking of good earth at site including royalty and carriage upto 15 km complete (earth measured in stacks will be reduced by 20% for payment). Analysed Rate. 348 Supply & stacking Urea 40% Nitrogen @160 kg per acre (as per yard stick of CPWD LDA SOR 2018-19/11.1 349 Supply & stacking DAP 50 kg per acre/year. LDA SOR 2018-19/11.2 350 Supply & Stacking Bone Meal/ Oil Cake(LDA SOR Horti 2018-19/11.3) 50 kg per acre/Year 351 Removal of garden waste by TATA 407 or equivalent including loading and unloading and carriage upto 1 km lead, complete disposal upto designated place as per direction of Officer in charge. DSR Horticulture 2020/2.60 based (Analysis Rate attached) 352 Part H (Electrical) 353 PART (X) 354 FOUNTAIN 355 SITC of Spray comprises of a Calyx Aerating in center flanked with Foam Jets on 4 corners of waterbody.Manifold/Pipework are made from Galvanised steel, B-class, make Jindal, ISI Mark with necessary accessories like flanges, sockets, stands etc. made of steel- galvanized. High quality rubber gaskets, nuts & bolts along with gunmetal control valves to adjust flow pressure.Proper completion of workAs per direction of E/IcFOR A 6 METER DIA WATERBODYPSR (36/G20/CE/23) 356 SITC of In Calyx Aerating Spray, water is sprayed in an inverted cone pattern withasmallcenterjet.Calyxnozzlemadeofaluminiumalloy– epoxycoated/StainlessSteel,centerjetnozzlemadeofbrass– chromeplated.Approx.heightofwatereffects:Calyx–1.25m heightX4.5mdia,CenterJet–3mheight. Proper completion of workAs per direction of E/Ic,FOR A 6 METER DIA WATERBODYPSR (36/G20/CE/23) 357 SITC of Foam jet nozzle, on ball joint, of1.25” orifice size. Nozzle made ofBrass- Chrome plated. Approx. height of water effects: 1.2m. Proper completion of workAs per direction of E/Ic, FOR A 6 METER DIA WATERBODYPSR (36/G20/CE/23) 358 Supply,Installation,TestingandCommissioningofLuminaries comprise of 12V LED lights (RGB). Complete light body made of Stainless steel 304 grade, total 27watt power leds. Toughened glass with seal.Stainless steel 304 grade cable gland. All external nuts and bolts are of Stainless steel 304 grade. Adjustable mounting bracket is made of Stainless steel 304 grade. IP 68 compliant. All in pool connections shall be fully waterproof. Make of Luminaries As per direction of E/Ic,FOR A 6 METER DIA WATERBODYPSR 359 SITCofMonoblocktypesubmersiblepumpset whit stainer/ filter ofFollowing Capacity(Threephase,50Hz,415-380VAC)propercompletion ofworkasperdirectionofE/Ic. Kirloskar/Crompton Greaves/KSB/Texmo. Suction filter for pump: Filter body & filter mesh made from AISI 304 standard stainless steel. As per direction of E/Ic 360 3 HP PSR 361 SITC of 1.1 kV grade double insulated copper flexible cable 2.5 sq.mm x 3 core for pumps,As per direction of E/IcPSR 362 SITC of 1.1 kV grade double insulated copper flexible cable 1.5 sq.mm x 4 core for lights, As per direction of E/Ic PSR 363 PSR Supply, Installation, Testing and commissioning of specialised Outdoor type Electric panel for fountain which include control arrangement for fountain, pumpset andRGB Sequencing lighting comprises of :1. Contactor 25 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)2. DOL Starter - 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)3. Single Phase Preventer- 01 Nos (Make: Bentex/ Selec/ GIC or equivalent)4. Incomer Main Switch 20 Amp- 01 Nos (Make: L&T/ Schneider/ Siemens/ GE)5. Overload Relay 6-12 Amp- 01 Nos (Make: L&T/ Schneider/ ABB/ BCH or equivalent)6. Fuse for motor 32 Amp- 03 Nos (Make: GE/ L&T or equivalent)7. MCB for Lights 6 Amp -01 Nos (Plaza/ Anchor/ ABB/ Havells/ Legrand or equivalent)8. Push Button On/ Off switches (Red/ Green)- 02 Nos. 9. Overload Indicator - 01 Nos (Make: Eaton/ Siemen or equivalent)10. Single Phase Indicator- 01 Nos (Make: Eaton/ Siemen or equivalent)11. 3 Phase indicator RGB- 01 Nos (Make: Eaton/ Siemen or equivalent)12.Voltmeter- 01 Nos. (Make: Motwane, Innova, Fluke or equivalent)13. Ampere Meter- 01 Nos (Make: Motwane, Innova, Fluke or equivalent)14. SMPS/ Transformer for lights- 01 Nos (Make: Meanwell/ Pheonix/ Omron or equivalent)15. RGB Lights controller- 01 Nos. (Make: Wet Design/Fontana/A.M. Irrigation System/Bharat engineers)16. Internal Wiringsteel sheet 16 gauge paint finish enclosure with hinged front door with provision for incoming & outgoing cable entry. Outgoing ampere 10, size of panel - 3ft X 2ft X 1ft depth.As per direction of E/Ic PSR (36/G20/CE/23) 364 Supply of 4000mm Extruded Square aluminum pole (grade 6063) Sq. 150 x 3mm thickness with IP68 Connector.Bespoke laser cutting design of length 1400mm with 50W In-Built LED with controlled downward light emission options (customized) with SS fasteners, Pre treated epdm black gaskets. Die-cast aluminum mounting plate Sq.250 x 12mm thick with 4 elongated holes 38 x 19 to suit M16 bolts at PCD 180 with pure polyester powder coating. Fixed with Hot dip galvanized foundation bolt. Mechanical resistance should be minimum IK06. The Pole should be undergone pure polyester powder coating process & Acid treatment to ensure high corrosion resistance. On the top of the pole there will be built-in Spot Lights of 2 x 18W LED are engineered accordingly to the existing regulations of Lumen Maintenance (LM80) and Technical Memorandum (TM21), Lifespan of the luminaire > 60,000 hours at 40°C. Operating ambient temperature range is from -15°C to +50°C. Driver efficiency >85%, power factor >0.9, THD <10%, Inbuilt Surge protection 6KV. Optical grade clear toughened glass diffuser of 4mm thickness with controlled downward light emission. Colour Temperature LED 3000K, 230-240Vac, CRI >80, MacAdam step 3. The driver should be inbuilt in the pole itself and maintenance can be done from the junction box itself. PDC aluminum service door 348mm height x 110mm width shall be provided with the company logo embossed on the bottom of the door and safety rope. The control gear tray is prewired with 2.5 Sq.mm cable,6A MCB and 32A terminal connectors for loop-in / loop-out arrangement. Any other internal cables and connections shall not be covered in the scope of supply. The manufacturer should have Inhouse NABL accredited lab to check and provide correct photometry of the product. The make should be as per K-Lite Verbena Spot KL-4583/Wipro/Ligman 365 Supply and fixing of 3500mmsteel poles are made out of mild steel galvanized rebbed extrusion profile having bottom section dia125mm and upper section dia 81mm with cast iron embellishment e8The pole have a service window at bottom section wih heavy duty four way connector and a mcb. Mild steal base plate with four nos. mounting holes is fixed and welded with bottom section . pole is primer coated and polyurethene painted . POLES BPTH SIDE OF THE ROADS AT 10 METER CC DISTANCE. PSR - BEGUM HAZRAT MAHAL PARK 366 Supply and fixing of OVER 600mm long aluminium dia cast body post top is mounted at the top with polycarbonate diffuser and fitted with 40w led disc bis registered make philips , bajaj, twinkle, lustore, K LITEor equivalent repuateted make Quotation rates 367 S/E of G.I. wire on 8 to 4 SWG on pole/service bracket including binding etc. complete in all respects SI.No. 628/18. 368 S/W of submain with two Nos. of 2.5 Sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material Labour and T&P required for proper completion of the work as directed at site by E/I. SI. No. 289/18. 369 S/Fof40ATPNofAutomaticstreetlightcubiclecontrolpanelpaintedwithanti corrosivealkaliandacidproofpaintconsistingoftimeswitchTSO100serieswith contractors,HRCfuses,isolatingswitchmeteringinstrument& instrumentbox with CTs etc, in case of TPN, complete in all respect as per direction of Engineer-in-charge. SI. No. 807/18 e(ii). 370 S/L of following cable Al conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm with DWC Pipeapproved makeUPPPCL as per direction of E/I. complete in all respects. 501/2018. Approved Makes:- Gloster/ Polycab/ KEI/ SCI/ Havells PWD SOR 501 371 10 sq. mm 4 core 372 (a) 35 Sq.mm 3.5Core 373 (b) 16 Sq.mm 4 Core 374 (c) 70 Sq.mm 3.5 core 375 S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable leadinsulatingwithtapeandmakingconnectionscompleteinallrespectsasper direction of E/I.SI.No.504/SOR-18. 376 10 sq. mm 4 core 377 (a) 25 sq.mm. 378 (b) 50 sq.mm 379 (c) 16 sq.mm 380 S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole. A.R. Bond No.87/CE/EE(E/M)2021, Dated 09-11-2021 381 S/Fof6Ampto32Amp.SPMCB(10KA)Ccurvecompleteinallrespectasper direction of Engineer-in-charge. SI No. 1002/18. CAT-A. 382 Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountendon non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc.The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. ( Incoming 200 Amp. TPN-1 No Outgoing 100 Amp. TNP-2 Nos. Cat. B. Cubicle TypePWD SI No : 802 (a) 383 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swgand inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PWD SI No :725 (A) 384 Supply and Laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE Pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required. DSR E&M 2022/14.161 385 Supply, Installation, testing & commissioning of Servo Stabilizerwith Isolation transformer 100KVA,3-phase servo voltage stabilizer with isolation transformer , oil cooled, Input 300-470 VAC, 4 Wire, 50 Hz, output: 400+/-1% with oil,suitable for UNBALANCED LOAD with automatic operation (outdoor type-IP 64).The stabilizer shall comply with the following requirement:: Regulation : +/- 10 %.: Over load & Short circuit protection.: Protection cut-off against Over/Under Voltage.: Single phase protection.: 3 nos. phase indication lamps. 386 PLINTH AREA RATES CPWD 2023, Supply installation , testing and commissioning of IP based CCTV system for building security comprising of PTZ/FIXED CAMERA, CABLING , RECORDING , DISPLAY SYSTEM HARDWARE SOFTWARE SUPPORT,FOR EXTERNAL SURVILLANCE 6.10.2 , FOR PLAZA AREA ONLY 387 Operation and maintenance for 1 years 388 PART (Y) 389 LFkkfir dh x;h ykbZVksa ds vuqj{k.k ,oa lapkyu dk dk;ZA 390 Providing of Trained Electricion With Tool Kit (As per PWD SOR/2020-202. For 18 months after DLP 391 Providing ofHelper Technicion (As per PWD SOR/2020-2021.For 18 months after DLP 392 PART-Z 393 H.T./L.T. work 394 S/Fofdoublepolestructurewith2nosS.T.poleforS/S 410SP-55 11 Mtr. longin1:3:6CC foundation 1/6 of pole length below G.I. and 30cm above G.I. 20cm thick around the pole with 2 nos. channel 125mmx75 mm one No. Chennel cross arm of 75mmX 40mm 2 No. 50X50X6mm sngle iron bracings with necessary nut bolts & packing pieces complete with painting as per direction of E/I.(PSR Bond No. 490/CE/2024) 395 S/F of 11 KV Pin insulator with G.I. Bolt /spindle nut etc. complete in all respects. (PSR Bond No. 490/CE/2024) 396 S/Fof11KVDiscinsulatorincludinggunfittingoncrossarm/clampsfixedonpole complete in all respects. (PSR Bond No. 490/CE/2024) 397 S/E of over head line with A.C.S.R. conductor on pole/service bracket including binding etc. complete in all respects. S.I.No-627/18. Racoon/Dog(PSR Bond No. 490/CE/2024) 398 S/F of M.S. Channel 75mmX40mm Vshape crossd arm for two No. pin insulator proper completion of work. (PSR Bond No. 490/CE/2024) 399 S/E of 11 K.V L.A. set of 3 wire. suitable for mounting on steel support complete in all respect as perdirection of E/I.(PSR Bond No. 490/CE/2024) 400 S/Eof11K.V.T.P.M.O.switchonpoleincludinghandlerodetc.completeinall respects as per direction of E/Ich.(PSR Bond No. 490/CE/2024) 401 S/E of 11 K.V. D.O. fuse set on pole complete in all respect as per direction of E/I.(PSR Bond No. 490/CE/2024) 402 Supply and laying of70 Sqmm 3 core 11 KV standered aluminium conductor XLPE(Cross linked polyethylene)insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connectedwith earth conductor by clamps etc. PWD SOR No : 506 (d) (PSR Bond No. 490/CE/2024) 403 S/F of 70 Sq.mm size 3 core XLPE 11 KV outdoor type jointing kitproper completion of work as per direction of E/I A.R. Make: Raycheme, Mahindra. (PSR Bond No. 490/CE/2024) 404 S/F of level 2 following capacity 11/0.433 K.V. Al’ wound conventional 50Hz 3 phase oil immersed naturally cooled distribution T/F confirming and with amendments there of, havinglosses as per BEE standered with all standard fittings, including first filling of oil complete in all respects, of make UPPCL/KESCO Approved (PSR Bond No. 490/CE/2024)(a) 63 KVA (A.R.) 405 Supply and burring of Safe Earthing Electrode T-19 Zn-Zinc Coated, Length 3000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra)Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.S.I.No-726 B/18. 406 S/Lof25mmx3mmGIstripfromearthelectrodedirectlyinthegroundasrequired complete in all respect Item No 716 SOR-2018 407 Supply and fixing of 2 metres high cage fabricated with 3mm thick expanded metal fixed on 50mm x 50mm x 6mm angle iron frame having vertical members spaced at 1 to 1.25 mts and horizontal members spaced at 1 mt. The vertical members shall be grouted in floor and horizontal members in the wall to a depth of 300mm with ends forked. The cage shall have 2000mm x 1000mm size one leaf door with locking device having door frame fabricated with 35mm x 35mm x 6mm angle iron and 3mm expanded metal duly fixed with the cage member with hinges etc. The cage shall be painted with red oxide primer and synthetic enamel paint. The job includes all materials, labour, T&P etc. for proper completion ofwork. PWD SI No : 1142 408 S/L of followingsize G.I.B classpipe ata depthof 750mmbelow groundlevel as cable carrier as direction of E/Inch. (PSR Bond - 490/CE/2024)(a) 80 mm dia

BRR : 8436902 Annual Rate Contract For Civil And Other Miscellaneous Maintenance Works At Wrpl Beawar And Sendra Station=10 NRECIV0001: Cleaning mosaic floor with Carborundum block stone, oxalic acid and caustic soda for all heights of all patches, spots a nd polishing with Mansion polish with all tools, tackles, consumables, materials & labour all complete. 20 NRECIV0002: Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left o ver materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. 30 NRECIV0003: Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI grade black phenyle / while phenyle / Acid /Naptha balls / Coir brushes / wire brushes / Finit in required proportion to make the a rea clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall b e measured). 40 NRECIV0004: Mopping of floors of offices, toilets, control rooms, electrical sub station etc. with soap solution or phenyle water wi th wet cloth after sweeping the floor with phooll broom, removing cob-webs with all tools, tackles, labour & materials etc. complete as per directions of Engineer -in-charge including cleaning of ventilator glass panes from both the sides upto any height with clea ning powder,paint remover as per requirement all labour, material etc.complete. 50 NRECIV0005: Carrying out miscellaneous activities related to general maintenance like daily dusting the furnitures, walls shelves, c leaning the carpets, sofas, Cleaning and sweeping the stair case, passages, backyard, verandah, garrages, removal of cow webs, with all labours, tools & tackles complete including supervising charges. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 60 NRECIV0006: Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning powder, paint remover as per requirement all labour, materials etc. complete.: Glass pane not exceeding 1.00 sq.m in area 70 NRECIV0007: Removing stains, paints, washing & cleaning the window & ventilator glass panes from both the sides upto any height with cleaning powder, paint remover as per requirement all labour, materials etc. complete.: Glass pane exceeding 1.00 sq.m in area 80 NRECIV0008: Collection of Kitchen waste, dry waste & toxic waste in offices and colony from all Residential & Public Buildings, Exec utive Hostel, Staff Hostel, Canteen, Guest House, Club etc. The workmen shall collect the waste from each house & Public Buildings, segregate the waste into biodegradable & non bio-degradeable waste and finally dispose themseparately at designated place (Dumping Yard/ Pit) on daily basis as per requirement, with trained workmen, with all labour, tools, tackles, safety & protective clothes etc . complete as per direction of Engineer-in-charge. All consumables required including manpower, tools & tackles, PPEs, uniform to wo rkmen, etc. are to be supplied by Contractor without any extra cost and performing work as per item decription and direction of Engi neer-in-Charge as well as instructions in Special Condition of Contract if any. Payment of Paddle Rickshaw (thela) will be made sepe rately. The unit MONTH (MON) shall mean per house/building per month 90 NRECIV0009: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain upto 2.0 sqm. 100 NRECIV0010: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 2.0 sqm. and upto 4.0 sqm. 110 NRECIV0011: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 4.0 sqm. and upto 10.0 sqm. 120 NRECIV0012: Cleaning and desilting of drains, side slopes in or under water or above water level and along drain both sides upto 1.0 metre width including removal of grass, bushes, vegetation, debris, sludge and any other unwanted material and disposal of the same at places as directed by Engineer-in-Charge within owners premises including all labour, materials, tools, tackles, transportation for all lead and lifts as directed.: Cross section of drain above 10.0 sqm and upto 15.0 sqm. 130 NRECIV0013: Labour charges for cleaning and dechoking of the nahani trap, gully trap and inspection chambers alongwith the CI and S W pipe connection of house drainage including flushing, removal of sludge muck outside all labour, tools etc. complete. The contract or has to clean the line from Nahani trap upto inspection chamber or vice-versa complete. 140 NRECIV0014: Cleaning and removing choking from existing rain water pipe including removing the shoe or grating if necessary & fixin g the same without damaging & fitting of specials all labour etc.complete. Up to 5 mtr. Height 150 NRECIV0015: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth upto 2.0 M 160 NRECIV0016: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth beyond 2.0 M but upto 3.0M 170 NRECIV0017: Cleaning of manholes and removal of chokage in sanitary sewer or CRWS manholes and its allied connection by rodding, st eaming, watering manually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Cha rge including plugging and dewatering of manholes removal of muck, sludge, floating materials etc. and disposing, the same to dumping pi t within owners premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, ho ses, operative labour etc. complete.: Manholes of depth beyond 3.0M 180 NRECIV0018: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth upto 2.0 M 190 NRECIV0019: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth beyond 2.0 M but upto 3.0M 200 NRECIV0020: Cleaning of manholes and removal of chokage in OWS manholes and its allied connection by rodding, steaming, watering man ually or by any applied means, making necessary connection of hoses etc. all as per direction of Engineer-in-Charge including pluggi ng and dewatering of manholes, removal of muck, sludge, floating materials etc. and disposing, the same to dumping pit within owner s premises as directed with all buckets, ropes, wooden plugs, tools, tackles, consumables, safety equipment pumps, hoses, operative labour etc. complete.: Manholes of depth beyond 3.0M 210 NRECIV0021: Cleaning dechoking and flushing inspection chambers and connected drain lines with drain cleaning rods, bamboos, compres sed air, steaming etc. removal of oily muck outside the chamber completed upto 100M lead. The item includes transportation of all ma chinery and plants, all labour, tools etc. complete, taking all necessary safety precautions as specified. Water at one point shall be supplied free of cost, hire charges for compressed air shall be paid separately if required. 220 NRECIV0022: Cleaning, dechoking and flushing 100mm/ 50mm SW and sewer line by removing muck, cleaning etc. with bamboo strips or sew er cleaning rods etc. as directed (section between two chambers) all complete including cleaning of two manholes as per direction of the Engineer-in-Charge. 230 NRECIV0025: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Upto a lead of 1 km 240 NRECIV0026: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Lead beyond 1 km but upto 2 km 250 NRECIV0027: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by mechanically driven transport for following leads or part thereof including loading, unloadin g and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction o f 20 percent for voids): Lead beyond 2 km but upto 3 km 260 NRECIV0028: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by manual labor / manually driven transport for following leads or part thereof including loadin g, unloading and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction of 20 percent for voids): Upto a lead of 50 m. 270 NRECIV0029: Material handling and carriage of any material including (but not limited to) rubbish, debris, earth, sludge, manure, ce ment, sand, furniture, plants, etc. by manual labor / manually driven transport for following leads or part thereof including loadin g, unloading and stacking all complete as per the direction of Engineer-in-Charge (Rates will be applicable to net quantities after deduction of 20 percent for voids): Every additional leads of 50 m or part thereof beyond 1st 50 m upto 9 such additional leads. 280 NRECIV0030: Supply of tractor with trailer on hire charges for 08 hours per day including rendering the services of 4 labourers driv er, fuel and other consumables, tools, tackles etc. for transportation of rubbish/ waste materials complete as per directions of Eng ineer-in-Charge.(8 hours working period of one tractor is considered as one tractor day). Unit EACH (EA) stands for tractor days. 290 NRECIV0031: Edging with common burnt clay F.P.S. (non modular) bricks of class designation 7.5, laid dry length wise, including requ ired excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within a lead of 50m. 300 NRECIV0038: Providing comprehensive pest control services to the building, sheds, cable trenches, drains and other facilities of th e establishment, to control the nuisance of various pests including (but not limited to) rodents, snakes, lizards, beehives, cockroa ches, mosquitoes, Red and Black ants, crawling pests, house flies, fruit flies, etc. Job includes placing / injecting rodenticide ba its, glue trays, snake repellent and other chemicals, insecticides, Fogging/fumigation, Removal of bee hives below ground (in trench es upto depth of 1m) and above ground (up to height of 15m), complete with all labours, materials, tools, and tackles, equipments, c onsumables etc complete. Periodicity of scheduled pest control activities shall be monthly, while ad hoc requirement shall be as and when required as directed by EIC whose decision shall be final. Area of measurement for pest control application shall be designate d by EIC. Rate is For (PER SQM PER MONTH) 310 NRECIV0039: Lifting, shifting, loading, unloading on of heavy equipment / material etc etc with the help of hydra/crane etc (Min 12T ) including all accessories like belt, sling etc as per directions of EIC/ Site- Engineer. (Unit EA shall mean carrying out abov e activities for 8 hrs. a day). 320 NRECIV0040: Hire and running charges of loader. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 330 PJEALU2634: Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubul ar sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM ru bber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever require d including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per arc hitectural drawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separat ely] : 340 PJEALU2636: Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) 350 PJEALU2637: Powder coated aluminium (Minimum thickness of powder coating 50 micron) 360 PJEALU2638: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) 370 PJEALU2639: For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixi ng of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required. [Note: Fittings shall be paid for sepa rately] : 380 PJEALU2640: Anodised Aluminium (Anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of Grade AC-15) 390 PJEALU2641: Powder coated aluminium (Minimum thickness of powder coating 50 micron) 400 PJEALU2642: Polyester powder coated aluminium (Minimum thickness of polyester powder coating 50 micron) 410 PJEALU2650: Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, havin g brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cut ting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. : 420 PJEALU2651: With stainless steel cover plate minimum 1.25 mm thickness 430 PJEALU2652: With brass cover plate minimum 1.25 mm thickness 440 PJEALU2685: Filling the gap in between Aluminium/ Stone/ Wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum work by pr oviding weather/ structural non-sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and dir ections of the Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 : 450 PJEALU2686: Up to 5 mm depth and 5 mm width 460 PJEALU2687: Up to 10 mm depth and 10 mm width 470 PJEALU2688: Up to 20 mm depth and 20 mm width 480 PJEALU2689: Providing and fixing, on fixed glazing/ doors/ window panes, sun control film HP NATURAL 35 SAFETY COMBINATION FILM-4Mi l of M/s. GARWARE or approved equivalent make and shade, all complete as per manufacturers specification and as per directions of the Engineer-in-Charge. 490 PJECLA0192: Marble work gang saw cut (polished and machine cut) Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marb le of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 ceme nt : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment t o match the marble shade [Note: To be secured to the backing by means of cramps, which shall be paid for separately] : 500 PJECLA0193: Area of slab up to 0.50 sqm 510 PJECLA0194: Area of slab over 0.50 sqm 520 PJECLA0195: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble for kitchen platforms, vanity counters, window sills, facias and similar loca tions of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : 530 PJECLA0196: Area of slab up to 0.50 sqm 540 PJECLA0197: Area of slab over 0.50 sqm 550 PJECLA0198: Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone sl ab of colour black, Cherry/Ruby red for kitchen platforms, vanity counters, window sills, facias and similar locations of required s ize, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with जोधर्पुर matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels : 560 PJECLA0199: Area of slab up to 0.50 sqm 570 PJECLA0200: Area of slab over 0.50 sqm 580 PJECLA0201: Providing edge moulding to 18 mm thick Marble/ Granite stone counters, Vanities etc., including machine polishing to edg e to give high gloss finish etc. complete as per design approved by the Engineer-in-Charge : 590 PJECLA0202: Marble work 600 PJECLA0203: Granite work 610 PJECLA0206: Mirror polishing on Marble work/ Granite work/ Stone work wherever required to give high gloss finish complete. 620 PJECLA0220: Providing and fixing machine cut, mirror/ eggshell polished Italian Marble stone slab (Perlato, Rosso verona, Fire Red o r Dark Emperadore etc.) of 18 mm thickness for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 c ement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 Kg/sq.m. including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directe d by the Engineer-in-Charge : 630 PJECLA0221: Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional h eight of 3 m or part thereof. 640 PJECLA0222: TILE WORK IN CLADDING : 650 PJECLA0223: Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the ma nufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-i n-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete. 660 PJECON0069: CEMENT CONCRETE (CAST IN-SITU) : 670 PJECON0070: Providing and laying in position cement concrete of specified grade at all depths including ramming & shuttering etc. c omplete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directio n of Site Engineer: 680 PJECON0071: 1:1.5:3 [1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal siz e derived from natural sources] 690 PJECON0072: 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources] 700 PJECON0074: 1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size de rived from natural sources] 710 PJECON0078: Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) deriv ed from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] laid to proper level & line incl uding providing shuttering & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per sq uare metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications a nd direction of Site Engineer. 720 PJECON0080: Making plinth protection 50 mm thick of cement concrete 1:3:6 [1 cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources] over 75 mm thick bed of dry brick ballast 40 mm nominal siz e, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specificatio ns and directions of the Engineer-in-Charge. 730 PJECON0082: Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manuf acturers specification. [Note: Unit KG shall mean PER BAG OF 50 KG OF CEMENT]. 740 PJECON0085: Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centerin g, shuttering and finishing: 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 2 0 mm nominal size derived from natural sources] 750 PJECON0087: Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, ancho r blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including hoisting and setting in position with cement mort ar 1:3 (1 cement : 3 coarse sand), cost of required centering complete: 1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources] 760 PJECON0088: Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), including the cost of required centering, shuttering complete : 1:1.5:3 [1 cement: 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources] 770 PJEDIS1159: Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per th e directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same s hall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] : 780 PJEDIS1160: Nominal concrete 1:3:6 or richer mix (including equivalent design mix) 790 PJEDIS1161: Nominal concrete 1:4:8 or leaner mix (including equivalent design mix) 800 PJEDIS1162: Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable mat erial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift o nly & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be d one prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge] 810 PJEDIS1163: Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable mate rial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of n ecessary covers/ barricades around the work area shall be done prior to dismantling operations] 820 PJEDIS1164: Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work as per direction of the Engine er-in-Charge. [Notes: (1) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by th e Engineer-in-Charge. (2) Payment shall be made on the cross sectional area of R.C.C. or R.B. work] 830 PJEDIS1165: Extra for scrapping, cleaning and straightening reinforcement from R.C.C. or R.B. work. 840 PJEDIS1166: Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and d isposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall b e allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades aro und the work area shall be done prior to dismantling operations] 850 PJEDIS1168: Demolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable materi al and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. 860 PJEDIS1171: Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc . complete and stacking within 50 metres lead : 870 PJEDIS1172: Of area 3.0 sq. metres and below 880 PJEDIS1173: Of area beyond 3.0 sq. metres 890 PJEDIS1177: Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in : 900 PJEDIS1178: Rolled Steel Joists 910 PJEDIS1179: Channels, angles, tees and flats 920 PJEDIS1181: Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 me tres lead as per direction of Engineer-in-charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantlin g operations. (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge .] 930 PJEDIS1185: Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead : 940 PJEDIS1186: For thickness of tiles 10 mm to 25 mm 950 PJEDIS1187: For thickness of tiles above 25 mm and up to 40 mm 960 PJEDIS1188: Demolishing dry brick pitching in floors, drains etc. including stacking serviceable material and disposal of unservicea ble material within 50 metres lead. 970 PJEDIS1190: Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable ma terial within 50 metres lead. 980 PJEDIS1191: Demolishing mud phaska in terracing and disposal of material within 50 metres lead. 990 PJEDIS1192: Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of : 1000 PJEDIS1193: G.S. Sheet 1010 PJEDIS1194: Asbestos Sheet 1020 PJEDIS1198: Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. 1030 PJEDIS1200: Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead : 1040 PJEDIS1201: Thickness up to 40 mm 1050 PJEDIS1202: Thickness above 40 mm up to 75 mm 1060 PJEDIS1204: Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres l ead : 1070 PJEDIS1205: 75 to 80 mm dia pipe 1080 PJEDIS1206: 100 mm dia pipe 1090 PJEDIS1207: 150 mm dia pipe 1100 PJEDIS1208: Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable mater ial within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift onl y & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be don e prior to dismantling operations.(3) Adequate safety precautions shall also be taken care before commencement of any activity] : 1110 PJEDIS1209: Water Bound Macadam Road 1120 PJEDIS1210: Bituminous Road 1130 PJEDIS1211: Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per the directions of Engineer-in-Charge : 1140 PJEDIS1212: 15 mm to 40 mm nominal bore 1150 PJEDIS1213: Above 40 mm nominal bore 1160 PJEDIS1214: Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical m eans breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per the directions of Engineer-in-Charge : 1170 PJEDIS1215: Up to 150 mm diameter 1180 PJEDIS1216: Above 150 mm dia up to 300 mm dia 1190 PJEDIS1217: Above 300 mm diameter 1200 PJEDIS1221: Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manual ly/ by mechanical means and stacking the pipes within 50 metres lead as per the directions of Engineer-in-Charge : 1210 PJEDIS1222: Up to 150 mm diameter 1220 PJEDIS1223: Above 150 mm diameter 1230 PJEDIS1224: Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metre s lead as per the directions of Engineer-in-Charge. 1240 PJEDIS1228: Dismantling of flushing cistern of all types (C.I./ PVC/ Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 1250 PJEDIS1232: Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. 1260 PJEDIS1233: Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 1270 PJEDIS1234: Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unservic eable surplus material and stacking of serviceable material with in 50 meters lead as directed by the Engineer-in-Charge. 1280 PJEDIS1237: Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for all leads including all lifts involved. 1290 PJEDRA2505: Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 Kg 1300 PJEDRA2506: Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality : 1310 PJEDRA2507: Light Duty-2.5 : 1320 PJEDRA2508: Rectangular shape 600x450 mm internal dimensions 1330 PJEDRA2509: Square shape 450 mm internal dimensions 1340 PJEDRA2510: Circular shape 450 mm internal diameter 1350 PJEDRA2511: Medium Duty-10 : 1360 PJEDRA2512: Square shape 450 mm internal dimensions 1370 PJEDRA2513: Circular shape 500 mm internal diameter 1380 PJEDRA2514: Heavy Duty-20 : 1390 PJEDRA2515: Circular shape 560 mm internal diameter 1400 PJEDRA2516: Extra Heavy Duty-35 : 1410 PJEDRA2517: Circular shape 560 mm internal diameter 1420 PJEDRA2518: Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both si des with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels fo r the drain etc. complete : 1430 PJEDRA2519: For pipes 100 to 250 mm diameter 1440 PJEDRA2520: For pipes 250 to 300 mm diameter 1450 PJEDRA2521: For pipes 350 to 450 mm diameter 1460 PJEDRA2550: Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125mm C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floor s, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materi als, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. 1470 PJEDRA2551: Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure coppe r floats, complete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications a nd directions of the Engineer-in-Charge. 1480 PJEDRA2553: Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid over a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) i ncluding making haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat c ement inside and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per s tandard design and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling , curing etc., as per specifications and directions of the Engineer-in-Charge. 1490 PJEDRA2588: Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. [Note: Unit KL shall mean KILO LITRE] 1500 PJEDRA2589: Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, a ll as per the directions of Engineer-in-Charge. 1510 PJEDRA2590: Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting s ewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including ski lled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking an d flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia up t o 300 mm dia for all depth. 1520 PJEEAR0002: Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) i n all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Ch arge. 1530 PJEEAR0004: Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas including trimming of sides of the trenches, dressing, ramming and levelling the bottom of the trenches correct to level, grade etc. including filling in sid es of foundation trenches, plinth etc. with the excavated earth available and/or depositing the excess earth within station area l imits, in layers not exceeding 20 cms. thick, consolidating each deposited layer by ramming, watering, dressing to level and grade , complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direc tion of Site Engineer. 1540 PJEEAR0005: In all kinds of soil 1550 PJEEAR0006: In Ordinary rock 1560 PJEEAR0009: Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractors own borrow areas including royalty, with all leads and lifts in trenches, plinth, sides of foundation etc. including watering, compacting in layers not exceed ing 20cm thickness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specif ications and direction of Site Engineer. 1570 PJEEAR0011: Supplying and filling coarse sand under floors, in foundations and plinth including cost-of sand, royalty, transportatio n, loading , unloading, spreading in layers not exceeding 20 cm., watering, ramming, compacting, dressing and levelling etc. compl ete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. 1580 PJEEAR0013: Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatment & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junction of wall & floor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the building shall be measured for payment]. 1590 PJEEAR0014: Supplying chemical emulsion (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) in sealed containers including deli very as specified. 1600 PJEEAR0015: Diluting and injecting chemical emulsion (Chlorpyriphos/ Lindane E.C. 20% with 1% concentration) for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : 1610 PJEEAR0016: Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/ sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete : 1620 PJEEAR0017: Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. : 1630 PJEEAR0020: Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based soluti on) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same : 1640 PJEEAR0021: Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measu red at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 1650 PJEEAR0022: Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 1660 PJEEAR0023: Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, r emoving the roots and stacking of serviceable material and disposal of unserviceable material : 1670 PJEEAR0024: Beyond 30 cm girth upto and including 60 cm girth 1680 PJEEAR0025: Beyond 60 cm girth upto and including 120 cm girth 1690 PJEEAR0026: Beyond 120 cm girth upto and including 240 cm girth 1700 PJEEAR0027: Above 240 cm girth 1710 PJEEAR0028: Disposal of moorum/ building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to designated location/ approved municiple dumping ground for lead up to 10 Km and for a ll lifts, complete as per directions of the Engineer-in-Charge. [Note: This item shall also be applicable in urban areas having dire ctions for restricted hours for movement/ plying of load carrying motor vehicles of 3.5 cum or more.] 1720 PJEEAR0030: Excavating trenches by mechinical / manual means of required width in all kinds of soil for pipes, cables, etc. includin g excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and th en returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil, all work up to any lead & lift as directed by the Engineer-in-Charge : 1730 PJEEAR0031: Pipes, cables etc. not exceeding 80 mm dia. 1740 PJEEAR0032: Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 1750 PJEEAR0033: Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm 1760 PJEEAR0034: Excavating trenches of required width in ordinary rock for pipes, cables, etc. including excavation for sockets, getting out the excavated materials, returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. , stacking servicable materials for measurements and disposal of unservicable materials, all work up to any lead & lift as directed by the Engineer-in-Charge : 1770 PJEEAR0035: Trench depth upto 1.5m : 1780 PJEEAR0036: Pipes, cables etc. not exceeding 80 mm dia 1790 PJEEAR0037: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 1800 PJEEAR0038: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1810 PJEEAR0039: Trench depth exceeding 1.5 m but not exceeding 3 m: 1820 PJEEAR0040: Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia 1830 PJEEAR0041: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1840 PJEEAR0042: Trench depth exceeding 3 m but not exceeding 4.5 m: 1850 PJEEAR0043: Pipes, cables exceeding 300 mm dia but not exceeding 600 mm dia 1860 PJEEAR0066: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceedin g 20 cm in depth, consolidating each deposited layer by ramming and watering, all works up to any lead and lift 1870 PJEFIN0898: CEMENT PLASTER (IN FINE SAND) : 1880 PJEFIN0899: 12 mm cement plaster of mix : 1890 PJEFIN0900: 1:4 (1 cement : 4 fine sand) 1900 PJEFIN0901: 1:6 (1 cement : 6 fine sand) 1910 PJEFIN0905: 20 mm cement plaster of mix : 1920 PJEFIN0906: 1:4 (1 cement : 4 fine sand) 1930 PJEFIN0907: 1:6 (1 cement : 6 fine sand) 1940 PJEFIN0908: CEMENT PLASTER (IN COARSE SAND) : 1950 PJEFIN0909: 12 mm cement plaster of mix : 1960 PJEFIN0910: 1:4 (1 cement : 4 coarse sand) 1970 PJEFIN0911: 1:6 (1 cement : 6 coarse sand) 1980 PJEFIN0915: 20 mm cement plaster of mix : 1990 PJEFIN0916: 1:4 (1 cement : 4 coarse sand) 2000 PJEFIN0917: 1:6 (1 cement : 6 coarse sand) 2010 PJEFIN0918: CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT 2020 PJEFIN0919: 12 mm cement plaster finished with a floating coat of neat cement of mix : 2030 PJEFIN0920: 1:3 (1 cement : 3 fine sand) 2040 PJEFIN0921: 1:4 (1 cement : 4 fine sand) 2050 PJEFIN0925: Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement : 2060 PJEFIN0926: 12 mm cement plaster 2070 PJEFIN0927: 20 mm cement plaster 2080 PJEFIN0942: Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufactu rers [Note: Unit BAG shall mean PER BAG OF 50 KG CEMENT USED IN THE MIX). 2090 PJEFIN0943: Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or par t thereof. 2100 PJEFIN0944: Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and s mooth complete. 2110 PJEFIN0945: Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Colum ns/ Beams brickwork as directed by the Engineer-in-Charge. 2120 PJEFIN0963: Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved ma nufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and inc luding water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 2130 PJEFIN0964: EXTERIOR FINISHING : 2140 PJEFIN0965: Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 Kg/10 sq m) 2150 PJEFIN0966: Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 2160 PJEFIN0967: Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) 2170 PJEFIN0968: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.9 kg/10 sqm) 2180 PJEFIN0969: Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifica tions : 2190 PJEFIN0970: Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm 2200 PJEFIN0971: Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. 2210 PJEFIN0972: Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm ov er an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. 2220 PJEFIN0973: Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon ad ditives: New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 2230 PJEFIN0974: Applying priming coat : 2240 PJEFIN0975: With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood 2250 PJEFIN0976: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 2260 PJEFIN0977: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat) 2270 PJEFIN0978: Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specification s including appropriate priming coat, preparation of surface, etc. complete : 2280 PJEFIN0979: On steel work 2290 PJEFIN0980: On concrete work 2300 PJEFIN0981: Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work : 2310 PJEFIN0982: 75 mm diameter pipes 2320 PJEFIN0983: 100 mm diameter pipes 2330 PJEFIN0984: 150 mm diameter pipes 2340 PJEFIN0985: Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats) 2350 PJEFIN0986: Providing and applying two coats of fire retardant paint on cleaned wood/ ply surface @ 3.5 sqm per litre per coat inclu ding preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. 2360 PJEFIN0987: Coal tarring two coats on new work using 0.16 Litre and 0.12 Litre coal tar per sqm in the first coat and second coat re spectively. 2370 PJEFIN0988: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2380 PJEFIN0989: Painting with aluminium paint of approved brand and manufacture to give an even shade : Two or more coats on new work 2390 PJEFIN0990: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : Two or mor e coats on new work 2400 PJEFIN0991: Varnishing with varnish of approved brand and manufacture : 2410 PJEFIN0992: Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish 2420 PJEFIN0993: Two or more coats glue sizing with spar varnish or an under coat of flatting varnish 2430 PJEFIN0996: Lettering with black Japan paint of approved brand and manufacture. [Note: Unit EA shall mean PER LETTER PER CM HEIGH T]. 2440 PJEFIN0997: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2450 PJEFIN0998: Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litr e, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : Old work (one or more coats) 2460 PJEFIN0999: Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour : 2470 PJEFIN1000: One coat 2480 PJEFIN1001: Two coats 2490 PJEFIN1002: Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour : 2500 PJEFIN1003: One coat 2510 PJEFIN1004: Two coats 2520 PJEFIN1005: Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content : 2530 PJEFIN1006: With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. 2540 PJEFIN1007: With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre. 2550 PJEFIN1008: Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair s to scratches etc. complete. 2560 PJEFIN1009: Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 2570 PJEFIN1010: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work : 2580 PJEFIN1011: 75 mm diameter pipes 2590 PJEFIN1012: 100 mm diameter pipes 2600 PJEFIN1013: 150 mm diameter pipes 2610 PJEFIN1014: Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of appro ved brand and manufacture and required colour on old work : 2620 PJEFIN1015: 75 mm diameter pipes 2630 PJEFIN1016: 100 mm diameter pipes 2640 PJEFIN1017: 150 mm diameter pipes 2650 PJEFIN1018: Painting with oil type wood preservative of approved brand and manufacture : Old work (one or more coats) 2660 PJEFIN1019: Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 2670 PJEFIN1020: Painting with aluminium paint of approved brand and manufacture to give an even shade : One or more coats on old work 2680 PJEFIN1021: Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade : One or mor e coats on old work 2690 PJEFIN1022: French spirit polishing : One or more coats on old work 2700 PJEFIN1023: Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work 2710 PJEFIN1024: Re-lettering with black Japan paint of approved brand and manufacture. [Note: Unit EA shall mean PER LETTER PER CM HE IGHT]. 2720 PJEFIN1025: Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. 2730 PJEFIN1026: Finishing walls with water proofing cement paint of required shade : 2740 PJEFIN1027: Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete i ncluding cost of Priming coat. 2750 PJEFIN1028: Old work (one or more coats applied @ 2.20 kg/10 sqm) complete. 2760 PJEFIN1029: Finishing walls with textured exterior paint of required shade 2770 PJEFIN1030: Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. 2780 PJEFIN1031: Old work (One or more coats) applied @ 1.82 ltr/10 sqm. 2790 PJEFIN1032: Finishing walls with Acrylic Smooth exterior paint of required shade : 2800 PJEFIN1033: Old work (Two or more coat applied @ 1.67 ltr/10 sqm) on existing cement paint surface. 2810 PJEFIN1034: Old work (One or more coat applied @ 0.90 ltr/10 sqm) 2820 PJEFIN1035: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : 2830 PJEFIN1036: Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. 2840 PJEFIN1037: Old work (one or more coats applied @ 0.83 ltr/10 sqm) 2850 PJEFIN1038: Varnishing with varnish of approved brand and manufacture : 2860 PJEFIN1039: One or more coats with copal varnish 2870 PJEFIN1040: One or more coats with spar varnish 2880 PJEFIN1041: Melamine polishing on wood work (one or more coat). 2890 PJEFIN1042: Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. 2900 PJEFIN1043: Providing Plaster of Paris coating on ceiling as per approved design complete in all respects inclusive of cost of all l abour, materials, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. 2910 PJEFLO0706: FLOORING : 2920 PJEFLO0707: Brick on edge flooring with bricks of class designation 7.5 on bed of 12 mm cement mortar, including filling the joint s with same mortar, with common burnt clay non modular bricks : 2930 PJEFLO0708: 1:4 (1 cement : 4 coarse sand) 2940 PJEFLO0709: 1:6 (1 cement : 6 coarse sand) 2950 PJEFLO0710: Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, includ ing filling joints with sand, with common burnt clay non modular bricks. 2960 PJEFLO0711: Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class desig nation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. 2970 PJEFLO0712: Providing and laying cement concrete flooring 25 mm thick of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggreg ates 12.5 mm nominal thickness), laid monolithically over base of concrete in panels at all locations and heights including treads o f steps, nosing, landing slab etc. and finished with a floating coat of neat cement @ 2.20 Kg of cement per sqm of flooring, supplyi ng and fixing 1.5 mm thick aluminium strips for full depth, chequering in floor finish if required, rounding, sloping, curing, finis hing, preparation of slab, steps, etc., complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. [Note: Payment for base concrete shall be made under relevant item]. 2980 PJEFLO0713: 40 mm thick cement concrete Flooring with P.C.C. of grade mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of step s etc. complete : 2990 PJEFLO0714: Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener c onsisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 li tre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosi ng of steps etc. complete. 3000 PJEFLO0715: 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 ce ment : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 ( 1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cemen t or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. comple te. 3010 PJEFLO0716: Providing and laying 52 mm thick cement concrete flooring with metallic hardner topping, under layer of 40 mm thick ceme nt concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 12 mm thick metallic con crete hardner consisting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compoun d such as IRONITE NO. 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of met allic floor hardening compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specifications and directions of the Engineer-in-Charge. 3020 PJEFLO0722: TILE FLOORING : 3030 PJEFLO0723: Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) : 3040 PJEFLO0724: Light shade pigment using white cement 3050 PJEFLO0725: Medium shade pigment using 50% white cement 50% Grey cement 3060 PJEFLO0726: Dark shade pigment using ordinary cement 3070 PJEFLO0727: Ordinary cement without any pigment 3080 PJEFLO0728: Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make & colour using acid and/or alkali r esisting mortar bedding and filling joints with acid and/or alkali resisting cement as per IS:4457, all complete as per specifcation s and directions of the Engineer-in-Charge : 3090 PJEFLO0729: In flooring on a bed of 10 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) : 3100 PJEFLO0730: In dado/ skirting on 12 mm thick mortar 1:4 (1 acid and/or alkali resistant cement : 4 coarse sand) : 3110 PJEFLO0731: MARBLE STONE FLOORING : 3120 PJEFLO0732: Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by the Engineer-in-Charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : 3130 PJEFLO0733: Makrana White Second Quality 3140 PJEFLO0734: Raj Nagar Plain 3150 PJEFLO0735: Agaria White 3160 PJEFLO0736: Black Zebra 3170 PJEFLO0737: Udaipur Green Marble 3180 PJEFLO0738: Pink Plain Marble 3190 PJEFLO0742: Providing and laying machine cut, mirror polished, 18 mm thick Italian Marble Stone slab (Perlato, Rosso verona, Fire Re d or Dark Emperadore, etc.) flooring laid in required pattern in linear portion of the building all complete as per architectural dr awings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jo inted with white cement slurry @ 4.4 Kg/sq.m., including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 3200 PJEFLO0743: Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstrac t etc.) and in patterns in combination with Italian marble stone slabs (Perlato, Rosso verona, Fire Red or Dark Emperadore, etc.) of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectu ral drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 Kg/sq.m. including pointing with white cement slurry admixed with pigment to match the ma rble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 3210 PJEFLO0744: Providing and laying natural Rajnagar White Marble tile strips 50 mm wide in flooring/ stairs laid over 20 mm thick ceme nt mortar 1:3 (1 cement : 3 coarse sand) including grouting the joints with white cement and matching pigment shade, cutting etc. as per manufacturers recommendation complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per d rawings, specifications and directions of the Engineer-in-Charge. (Minimum length of strip shall be 600 mm). 3220 PJEFLO0745: GRANITE STONE FLOORING : 3230 PJEFLO0746: Providing and laying flamed finish Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) floori ng in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointe d with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and poli shing etc. all complete as specified and as directed by the Engineer-in-Charge. 3240 PJEFLO0747: Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear p ortions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base o f cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed wit h pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer- in-Charge. 3250 PJEFLO0748: Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent 3260 PJEFLO0749: Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red 3270 PJEFLO0750: Providing and laying natural granite stone tile strips 50 mm wide in flooring of approved shade laid over 20 mm thick ce ment mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment shade, cutting etc. as per manufacturers recommendation complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Minimum length of strip shall be 600 mm). 3280 PJEFLO0761: VITRIFIED FLOOR TILES : 3290 PJEFLO0762: Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mort ar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement a nd matching pigments etc., complete : 3300 PJEFLO0763: Size of Tile 500x500 mm 3310 PJEFLO0764: Size of Tile 600x600 mm 3320 PJEFLO0765: Size of Tile 800x800 mm 3330 PJEFLO0766: Size of Tile 1000x1000 mm 3340 PJEFLO0767: Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, includin g grouting of joints. [Note: Payment for grouting of joints shall be made separately] : 3350 PJEFLO0768: Size of Tile 500x500 mm 3360 PJEFLO0769: Size of Tile 600x600 mm 3370 PJEFLO0770: Size of Tile 800x800 mm 3380 PJEFLO0771: Size of Tile 1000x1000 mm 3390 PJEFLO0772: Providing and laying Double Charge Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by th e Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours an d shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. L aying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : 3400 PJEFLO0773: Size of Tile 600 x 600 mm 3410 PJEFLO0774: Size of Tile 600 x 1200 mm 3420 PJEFLO0775: Size of Tile 800 x 800 mm 3430 PJEFLO0776: Size of Tile 800 x 1600 mm 3440 PJEFLO0777: Size of Tile 1000 x 1000 mm 3450 PJEFLO0778: Providing and laying Glazed Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by the Manuf acturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shade s, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including groutin g the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying o f tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placin g the tiles gently and easily : 3460 PJEFLO0779: Size of Tile 600 x 600 mm 3470 PJEFLO0780: Size of Tile 600 x 1200 mm 3480 PJEFLO0781: Size of Tile 800 x 800 mm 3490 PJEFLO0782: Size of Tile 800 x 1200 mm 3500 PJEFLO0783: Size of Tile 1200 x 1200 mm 3510 PJEFLO0784: Providing and laying Glazed Vitrified Tiles (Matt/ Antiskid finish) of specified sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including g routing the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. La ying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily : 3520 PJEFLO0785: Size of Tile 600 x 600 mm 3530 PJEFLO0786: Size of Tile 600 x 1200 mm 3540 PJEFLO0787: Size of Tile 800 x 800 mm 3550 PJEFLO0788: Size of Tile 800 x 1200 mm 3560 PJEFLO0789: Size of Tile 1200 x 1200 mm 3570 PJEFLO0790: Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorpti on less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm th ick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete : 3580 PJEFLO0791: Size of Tile 500x500 mm 3590 PJEFLO0792: Size of Tile 600x600 mm 3600 PJEFLO0793: Size of Tile 800x800 mm 3610 PJEFLO0794: Size of Tile 1000x1000 mm 3620 PJEGEN2809: GENERAL WORKS : 3630 PJEGEN2816: Supply, installation, testing & commissioning of Turbo Roof Air Ventilators of Fan Size- 24 inch (neck/ throat dia.), Ve ntilator Diameter- 30 inch, Ventilator Base (FRP)- standard width 1.8m x dome height 750mm, Opening for ventilation dome- 860mm x 68 0mm x 608mm, thickness 2mm etc. complete in all respects and as per specifications and directions of the Engineer-in-Charge. 3640 PJEGEN2821: Providing and erecting 2.0 metre high temporary barricading at site; each panel of size 2.5m x 2.0m made of 40x40x6mm an gle iron or 50x50x3mm hollow MS tube posts/ horizontal members/ bracings covered with 1.63mm thick MS Sheet. The steel shall be fixe d with 30x5mm MS flat by suitable welding/ riveting. The panels shall be made so that gap of 50cm above the ground is available maki ng overall height as 2.5m. MS channel ISLC75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/ direction of E ngineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The ba rricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for da mages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be r emoved without prior approval of the Engineer-in-Charge. [Note: One time payment shall be made for providing barricading from start of work till completion of work including shifting. The barricading provided shall remain to be the property of the contractor on co mpletion of the work]. 3650 PJEGEN2824: Providing and laying Non-Woven Geo Textile Mat NW 300 made from high quality polypropylene fibres having mass of 300 gra ms/ SQ.M of GAYATRI or approved equivalent make inclusive of cost of all labour, materials, tools, tackles etc. as per manufacturer s recommendations and directions of the Engineer-in-Charge. 3660 PJEHOR2827: HORTICULTURE & LANDSCAPING : 3670 PJEHOR2828: Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of ea rth measured in stacks will be reduced by 20% for payment]. 3680 PJEHOR2829: Supplying and stacking sludge at site including royalty and carriage up to any lead complete. [Note: Volume of sludge me asured in stacks will be reduced by 8% for payment]. 3690 PJEHOR2830: Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [No te: Volume of cattle manure measured in stacks will reduced by 8% for payment]. 3700 PJEHOR2835: Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. 3710 PJEHOR2836: Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material , consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR]. 3720 PJEHOR2837: Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling. [ Note: Cost of supplying earth and sludge or manure and mixing shall be paid separately under relevant items of SOR]. 3730 PJEHOR2838: Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then dispo sing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by fi lling with earth or earth mixed with sludge or/ and manure before and after flooding trench with water. [Note: The rate is excluding cost of imported earth, sludge or manure]. 3740 PJEHOR2839: Rough dressing the trenched ground including breaking clods. 3750 PJEHOR2840: Flooding the ground with water including making kiaries and dismantling the same. 3760 PJEHOR2841: Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted veg etation. 3770 PJEHOR2844: Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with ro ots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts. 3780 PJEHOR2845: Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further dep th of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of sta cked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with w ater, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of material s declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete. [Note: Cost of sludge, manure or extra earth shall be paid for separately under relevant item of SOR]. 3790 PJEHOR2846: Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts. [Note: Cost of m anure, sludge or extra good earth if needed shall be paid separately under relevant item of SOR]. 3800 PJEHOR2847: Holes 1.2 m diameter and 1.2 m deep 3810 PJEHOR2848: Holes 90 cm diameter and 90 cm deep 3820 PJEHOR2849: Holes 60 cm diameter and 60 cm deep 3830 PJEHOR2850: Holes 45 cm diameter and 45 cm deep 3840 PJEHOR2851: Supplying & Stacking of Selection No.1/ Doob Grass at site fresh & free from weeds having proper roots in green includin g loading, unloading, carriage and all taxes paid etc. complete as per directions of the Engineer-in-Charge. 3850 PJEHOR2852: Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the gr ass forms a thick lawn, free from weeds and fit for mowing including supply and filling of good earth, if required during maintenanc e period. [Note: The grass and good earth shall be paid for separately under relevant item of SOR] : 3860 PJEHOR2853: In rows 5 cm apart in both directions 3870 PJEHOR2854: With grass Turf 3880 PJEHOR2855: Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with pro per level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the En gineer-in-Charge. 3890 PJEHOR2856: Providing & laying Selection No. 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light wate ring the same maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Charge . 3900 PJEHOR2857: Plantation of Trees, Shrubs and Hedges at site including watering and removal of unserviceable materials as per directio n of the Engineer-in-Charge (excluding cost of plant & water): 3910 PJEHOR2858: Tree Plant 3920 PJEHOR2859: Shrub Plant 3930 PJEHOR2860: Hedge Plant/ Ground Cover 3940 PJEHOR2861: Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, As hokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days min imum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions o f the Engineer-in-Charge. 3950 PJEHOR2862: Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 c oarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wi res of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specifie d period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge. 3960 PJEHOR2863: Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm 3970 PJEHOR2864: Top inside diameter 30 cm, outer bottom diameter 20 cm, total height 30 cm with wall thickness of 25.4 mm 3980 PJEHOR2873: Filling of the Polythene bags by mixture of good earth and manure in the ratio of 2:1 (2 part of Good Earth and 1 part o f the Manure) and placing the same at appropriate place including supply & providing Polythene bags, all complete as per direction o f the Engineer-in-Charge. [Note:The Good Earth & Manure shall be paid separately under relevant item of SOR]. 3990 PJEHOR2874: Polythene bags size 12.5 cm diameter & 17.5 cm height 4000 PJEHOR2890: Edging with common burnt clay F.P.S (non modular) bricks of class designation 7.5, laid dry length wise including requir ed excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within any lead. 4010 PJEHOR2894: Providing & fixing of White River (Stone) Pebbles size of 2 to 2.50 dia in natural colour at site of work including lo ading, unloading, carriage and all taxes paid etc.and as per directions of the Engineer-in-Charge. 4020 PJEHOR2895: Providing and fixing of TUFLEX Garden Fencing Hexagonal Net or approved equivalent of green colour (Weight 510 (+/-8%) g rams/SQ.M) in width of 60 cm with bamboo of 90 cm length. The bamboo should be painted with green colour paint of approved brand and manufacture (two or more coats) and fixed 30 cm below ground level and 60 cm above ground level at a distance of 1.50 metres. The n et and bamboo should be binded with 2 mm G.I. wire at three places properly as per directions of the Engineer-in-Charge. 4030 PJEHOR2896: MAINTENANCE WORKS 4040 PJEHOR2897: Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing t he same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds an d fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or m anure. [Note: The good earth shall be paid for separately under relevant item of SOR]. 4050 PJEHOR2898: Cutting of hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and a pplying insecticides and fungicides etc. (excluding the cost of all materials) complete as per directions of the Engineer-in-Charge. [Note: Unit SQM shall mean PER SQM PER MONTH.] 4060 PJEHOR2899: Cutting of designer hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manur ing and applying insecticides and fungicides etc. (excluding the cost of materials) complete as per directions of the Engineer-in-Ch arge. [Note: Unit SQM shall mean PER SQM PER MONTH.] 4070 PJEHOR2903: Pruning, trimming, shaping of trees/ shrubs (height 15 feet above) and removal of cut materials up to 50m lead inclusi ve of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TREE]. 4080 PJEHOR2904: Providing and watering of Horticulture features i.e. lawn, tree, shrubs, hedge/ edge, ground cover etc. with irrigation water at the site of work. Watering shall be done through water tanker having 5000 litre capacity with one labour for watering inclu ding cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP]. 4090 PJEHOR2905: Anti-termite treatment of trees by digging holes 30 cm deep & 4 cm dia, 6 to 7 holes around the tree using chemical emul sion (Chlorpyriphos 20% EC in the ratio of 1% concentration) at the rate of 1.5 liter per hole in two time or more application to ge t the trees free from termite infection, complete as per directions of the Engineer-in-Charge. [Note: Unit EA shall mean EACH TRE E]. 4100 PJEHOR2908: Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, deb ris, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per dire ction of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. 4110 PJEHOR2909: Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km l ead & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP] . 4120 PJEMAS0143: MASONRY WORK : 4130 PJEMAS0144: Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : 4140 PJEMAS0145: Cement mortar 1:4 (1 cement : 4 coarse sand) 4150 PJEMAS0146: Cement mortar 1:6 (1 cement : 6 coarse sand) 4160 PJEMAS0147: Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in : 4170 PJEMAS0148: Cement mortar 1:4 (1 cement : 4 coarse sand) 4180 PJEMAS0149: Cement Mortar 1:6 (1 cement : 6 coarse sand) 4190 PJEMAS0150: Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth le vel up to floor V level in all shapes and sizes in : 4200 PJEMAS0151: Cement mortar 1:4 (1 cement : 4 coarse sand) 4210 PJEMAS0152: Cement mortar 1:6 (1 cement : 6 coarse sand) 4220 PJERAI2738: Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required th ickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4230 PJERAI2739: Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing lay er of boulders, in required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4240 PJERAI2740: Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per directions of the Engineer-in-Charge. 4250 PJERAI2742: Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, o f size 1000x450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos. cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all a s per directions of the Engineer-in-Charge. 4260 PJEREI0090: RCC (CAST IN-SITU) : 4270 PJEREI0091: Providing and laying structural reinforced cement concrete work (1:1.5:3) conforming to IS:456 (1 cement : 1.5 coarse sa nd : 3 graded stone aggregate 20 mm nominal size) at all heights and depth for construction of foundations, beams, columns, stairca ses, chajja,lintels, balconies, shelves, plain window sills, roof slabs, facia, canopies, fins, porch, water tank etc. including pro viding centering, shuttering, staging, scaffolding, form work etc compacting with mechanical vibrator, curing etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engin eer. (Payment for Reinforcement shall be made as per relevant item of SOR). 4280 PJEREI0092: a) All work up to plinth level 4290 PJEREI0093: b) In superstructure at all floors up to floor five level, 4300 PJEREI0106: Steel reinforcement for R.C.C. workincluding initial straightening of coiled/uncoiled bars, removal of loose rust, cutti ng, bending to correct size & shape, binding with 18 gauge G.I. wire at each intersection and placing at any position, at any height and depth complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. : Thermo-Mechanically Treated bars of grade Fe-500 D or more 4310 PJEREP1046: Repair to plaster of thickness 12 mm to 20 mm in patches of area up to 2.5 SQM including cutting the patch in proper sha pe, raking out joints, preparing and plastering the wall surface etc. complete, including disposal of rubbish at unobjectionable are a outside Ownders premises, all complete as per directions of the Engineer-in-Charge : 4320 PJEREP1047: With cement mortar 1:4 (1 cement : 4 fine sand) 4330 PJEREP1048: With cement mortar 1:4 (1 cement : 4 coarse sand) 4340 PJEREP1103: Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube ch allies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condi tion for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runn ers, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of the Engineer-in-Charge. The elevational area of the scaffolding shal l be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. [Note: This item to be use d for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done] 4350 PJEREP1108: Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per the directions of Engineer-in-Charge. 4360 PJEREP1109: Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per the dir ections of Engineer-in-Charge. 4370 PJEREP1113: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing me mbrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer o f membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 350/3 00 N/5 cm. (b) Tear strength in longitudinal and transverse direction as 60/80N. (c) Softening point of membrane not less than 150°C . (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done thr ough the authorised applicator of the manufacturer of membrane. 4380 PJEREP1114: Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing me mbrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 l itre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physic al and chemical parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C a s 650/450N/5cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less tha n 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got d one through the authorised applicator of the manufacturer of membrane. 4390 PJEREP1115: Extra for covering top of membrane with Geotextile, 120 GSM non woven, 100% polyester of thickness 1 to 1.25 mm bonded t o the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation. 4400 PJEREP1116: STRUCTURAL REPAIR WORKS : 4410 PJEREP1117: Chipping of unsound/ weak concrete material from slabs, beams, columns etc. with manual Chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning t he exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as p er directions of the Engineer-in-Charge : 4420 PJEREP1118: 75 mm average thickness 4430 PJEREP1119: 50 mm average thickness 4440 PJEREP1120: 25 mm average thickness 4450 PJEREP1121: Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkali ne chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per directions of the Engineer-in-Charge : 4460 PJEREP1122: Bars up to 12 mm diameter 4470 PJEREP1123: Bars above 12 mm diameter 4480 PJEREP1124: Providing and applying anticorrosive treatment to exposed structural reinforcement with two coats of IPNET RB or equival ent with time interval of minimum 8-10 hours between each coat after the application of two coats of alkaline rust converting primer . The application shall be done by brush after cleaning existing reinforecement with wire/ rotary wire brush to make the surface fre e from loose material, dirt etc. and thoroughly washing with water and allowing it to dry inclusive of all materials, labour, equipm ent, etc. complete as per specifications and directions of the Engineer-in-Charge. The application of anticorrosive treatment shall be strictly as per technical specifications and directions of the Engineer-in-Charge. [Note: Unit M shall mean RUNNING METRE. Th e running metre of rebars shall be measured for payment purpose]. 4490 PJEREP1125: Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm up to 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/ balconies including fixing the stee l bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per dire ctions of the Engineer-in-Charge : Up to and including 12 mm diameter 4500 PJEREP1126: Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and dir ections of the Engineer-in-Charge complete in all respect : 4510 PJEREP1127: SBR Polymer (@ 10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer. 4520 PJEREP1128: Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make. 4530 PJEREP1129: Providing, mixing and applying SBR polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 g raded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of the Engineer-in-Charge. [No te: Measurement and Payment- The pre-measurement of thickness shall be done just after the surface preparation is completed and paym ent under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by soundi ng/ tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/sq.mm] : 4540 PJEREP1130: 12 mm average thickness. 4550 PJEREP1131: 25 mm average thickness in 2 layers. 4560 PJEREP1132: 50 mm average thickness in 3 layers. 4570 PJEREP1140: Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/ honey-comb area of con crete/ masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of the Engineer-in-Charge. [Note: The payment shall be made on the basis of actual weight of approved grout injected] : 4580 PJEREP1141: Stirrer mixed Acrylic Polymer of approved make (@ 2% of weight of cement used) modified cement slurry made with non shri nk compound in Concrete/ RCC work. 4590 PJEREP1142: Stirrer mixed SBR Polymer (of approved make) modified cement slurry made with Shrinkage Compensating Cement in Concrete/ RCC work. 4600 PJEREP1143: Epoxy injection grout in Concrete/ RCC work of approved make. 4610 PJEROA1249: Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand pic king, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to the required de nsity. 4620 PJEROA1250: SURFACE DRESSING : 4630 PJEROA1251: Surface dressing on new surface with paving bitumen of grade VG-10 of approved quality using 2.25 Kg of bitumen per sqm with 1.65 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity etc. complete. 4640 PJEROA1252: Surface dressing on new surface in two coats with bitumen of grade VG-10 of approved quality using 1.8 kg of bitumen per sqm with 1.5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface for first coat and 1.1 kg. of bitumen per sqm with 1.00 cu. metre of stone chippings 11.2 mm nominal size per 100 sqm of road surface for second coat, including consolidation of each coat separately with road roller of 6 to 8 tonne capacity etc. complete. 4650 PJEROA1253: Surface dressing on old surface with hot bitumen of grade VG-10 of approved quality using 1.95 kg of bitumen per sqm wit h 1.50 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 t onne capacity, etc. complete. 4660 PJEROA1254: Surface dressing one coat on new surface with bitumen of specified grade at a rate of 1.95 Kg/sqm of surface area with 1 .5 cum of stone chippings 13.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 tonne capacity, etc. complete :Using Bitumen Emulsion (Minimum 50% bitumen content- RS grade conforming to IS:8887) 4670 PJEROA1255: Surface dressing one coat on old surface with bitumen of specified grade at the rate of 1.22 kg/ sqm of surface area wit h 1.10 cum of stone chippings 11.2 mm nominal size per 100 sqm of road surface, including consolidation with road roller of 6 to 8 t onne capacity etc. complete : Using Bitumen Emulsion (Minimum 50% bitumen content- RS grade conforming to IS:8887) 4680 PJEROA1285: SEAL COAT : 4690 PJEROA1286: Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitume n using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surfac e, including rolling and finishing with road roller all complete. [Note: This item to be operated only with the prior approval of th e Engineer-in-Charge]. 4700 PJEROA1298: PAINTING AREA / RUNWAY MARKING : 4710 PJEROA1299: Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conf orming to IS:164, on bituminous surface in white/ yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete 4720 PJEROA1300: New work (Two or more coats) 4730 PJEROA1301: Old work (One or more coats) 4740 PJEROA1309: Providing and fixing Glow Studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylore trite) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by the Engineer-in-Charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope o f retro-reflective surface shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as re commended in BS: 873 (Part-4):1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedu re recommended by the manufacturer complete and as per directions of the Engineer-in-Charge. 4750 PJEROA1315: Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermopl astic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, prop ane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cle aning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charg e and accordance with applicable specifications. 4760 PJEROA1359: Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material withi n 50 metre lead as per directions of the Engineer-in-Charge. 4770 PJEROA1360: Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., dispos al of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge. 4780 PJEROA1361: Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the directions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by the department free of cost]. 4790 PJEROA1362: Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, joint ed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except a t sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Old kerb stones shall be suppl ied by the department free of cost.] 4800 PJEROO0824: THERMAL INSULATION: 4810 PJEROO0825: Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS:8183, density 24 kg/cu.m., 50mm thick, wrapped in 200G Virgin Polythene bags, fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top most ceiling of building. 4820 PJEROO0826: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183, Density 16 Kg/cu.m., 5 0 mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing G.I. wir e. 4830 PJEROO0827: Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS:8183 having density 24 Kg/cu .m., 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug & washers and held in position by criss crossing G.I. wire etc. complete as per directions of the Engineer-in-Charge. 4840 PJEROO0828: Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS:8 183, density 48 Kg/cu.m., 50 mm thick, wrapped in 200G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 Gauge wire mesh, for top most ceiling of building. 4850 PJEROO0872: FALSE CEILING : 4860 PJEROO0873: Providing and fixing tiled false ceiling of specified materials size 595x595 mm in true horizontal level, suspended o n inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sq.m., both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, sp aced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between m ain T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of siz e 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for servi like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using G.I. slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia. and 50 mm long dash fasteners, 4 mm G.I. adjustable rods w ith galvanised butterfly level clips size 85x30x0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings a nd as directed by the Engineer-in-Charge : 4870 PJEROO0874: G.I. Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm dro p; made of G. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and electro-statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. 4880 PJEROO0875: G.I. Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made G.I. sheet having galvanizing of 100 gms/sq.m. (both sides inclusive) and 20% perforation area with 1.8 mm dia. holes and having NRC (Noise Reduction Coefficient) of 0.5, electro-statically polyester powder coated thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 4890 PJEROO0876: 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from n atural gypsum as per IS:2095 (Part-1) and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 4900 PJEROO0877: 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 (Part-1 ), of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm center to center with center borders of 48 mm and the side border s of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bon ded glass wool backing. 4910 PJESAN1368: SANITARY INSTALLATIONS : 4920 PJESAN1369: Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 l itre low level white P.V.C. dual flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming t o IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White vitreous china orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 4930 PJESAN1370: Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litr e low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS:72 31, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 4940 PJESAN1371: W.C. pan with ISI marked white solid plastic seat and lid. 4950 PJESAN1373: Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low lev el white vitreous china dual flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangemen t with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings a nd brackets, cutting and making good the walls and floors wherever required : 4960 PJESAN1374: W.C. pan with ISI marked white solid plastic seat and lid 4970 PJESAN1376: Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass union s and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requir ed : 4980 PJESAN1377: One urinal basin with 5 litre white P.V.C. automatic flushing cistern 4990 PJESAN1378: Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern 5000 PJESAN1379: Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern 5010 PJESAN1391: Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pat tern, including painting of fittings and brackets, cutting and making good the walls wherever require : 5020 PJESAN1392: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 5030 PJESAN1407: Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 5040 PJESAN1408: Kitchen sink with drain board : 5050 PJESAN1409: 510x1040 mm bowl depth 250 mm 5060 PJESAN1410: 510x1040 mm bowl depth 225 mm 5070 PJESAN1411: 510x1040 mm bowl depth 200 mm 5080 PJESAN1412: 510x1040 mm bowl depth 178 mm 5090 PJESAN1457: Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete : 5100 PJESAN1466: Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick har d board ground fixed to wooden cleats with C.P. brass screws and washers complete. 5110 PJESAN1473: Providing and fixing toilet paper holder : 5120 PJESAN1474: C.P. Brass 5130 PJESAN1665: Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour : 5140 PJESAN1666: Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. 5150 PJESAN1667: Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. 5160 PJESAN1668: Providing and fixing PTMT Bottle Trap for Wash basin and sink : 5170 PJESAN1669: Bottle trap 31 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of th e waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms. 5180 PJESAN1670: Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of th e waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms. 5190 PJESAN1671: Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 5200 PJESAN1672: Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wal l face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. 5210 PJESAN1673: Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed f ittings arrangement of approved quality and colour : 5220 PJESAN1674: 450 mm long towel rail with total length of 495 mm, 78 mm width and effective height of 88 mm, weighing not less than 17 0 gms. 5230 PJESAN1675: 600 mm long towel rail with total length of 645 mm, 78 mm width and effective height of 88 mm, weighing not less than 19 0 gms. 5240 PJESTE0618: Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, lock ing arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 5250 PJESTE0619: Providing and fixing 1 mm thick M.S. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm M.S. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and T- iron guide at the top and bottom respe ctively, including applying a priming coat of approved steel primer. 5260 PJESTE0623: Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through t heir entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing n ecessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454 (Part-1) and M.S. top cover of required thickness for rolling shutters : 5270 PJESTE0624: 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover 5280 PJESTE0627: Providing and fixing ball bearing for rolling shutters. 5290 PJESTE0628: Extra for providing mechanical device chain and crank operation for operating rolling shutters : 5300 PJESTE0629: Exceeding 10.00 sq.m. and up to 16.80 sq.m. in the area 5310 PJESTE0630: Exceeding 16.80 sq.m. in area 5320 PJESTE0664: Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase rail ing and similar works, including applying priming coat of approved steel primer : 5330 PJESTE0665: M.S. Tube 5340 PJESTE0666: E.R.W. Tubes 5350 PJESTE0667: G.I. Pipes 5360 PJESTE0674: Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc. , of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-C harge. [Note: For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nu ts, bolts, fasteners etc.] 5370 PJESTE0675: Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts c omplete : 5380 PJESTE0676: Galvanised M.S. wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. 5390 PJESTE0677: Stainless Steel (Grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. 5400 PJESTE0687: Supplying, fitting and fixing hot dip galvinised barbed line wire through holes in fencing posts (already made in the bo dy of the post), tightening and fixing the wire in tight condition with straining bolts (straining bolts at end post) including the cost of cutting and lapping joints, making holes, straining bolts, galvanised staples, binding wires etc. complete in all respects i nclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Cha rge. 5410 PJESTE0690: Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provis ion for lifting arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawing s, specifications and directions of the Engineer-in-Charge. 5420 PJESTE0691: Supplying & fixing Pigeon Protection net of mesh 15 mm x 15 mm & Gauge SW14 in sheds including specials required for bol ting with tie members of truss, painted with two coats of synthetic enamel paint of over a coat of red oxide zinc chrome primer comp lete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction o f the Engineer-in-Charge. 5430 PJESTE0698: G.I. Barbed Wire Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizon tal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 Kg/100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. [Notes: (1) Cost of posts, struts, earth work and concrete work to be paid for separately. (2) Payment to be made per metre cost of total length of barbed wire used]. 5440 PJESTE0704: Supplying, fitting and fixing punched tape concertina spiral coil of 50 turns per coil having core wire of 2.6 mm diamet er made of high carbon spring steel of high tensile strength as per IS:4454 (Part-I, Grade-II) having minimum galvanising coating th ickness equivalent to 230 grams per square metre and low carbon steel strip of 0.5 mm thickness having a series of barbes punched al l along the length on both sides of the strip at regular interval as per IS:513, DD quality having minimum galvanising coating thick ness of 12 microns. Hardness of tape should be between 137-180 VPN (Victor Penetration Number). The coil should be clipped sufficien tly at regular intervals. The coil should not be stretched for more than 6.0 m length and the minimum diameter of the coil in the cl osed condition should not be less than 600 mm complete in all respects inclusive of cost of all labour, materials, tools, tackles et c. as per drawings, specifications and directions of the Engineer-in-Charge. 5450 PJESTE0705: Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (tota l length 90 m), having 50 nos rounds per 6 metre length, up to 3 m height of wall with existing angle iron Y shaped placed 2.4 m o r 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per the directions of Engineer-in-Charge, with re inforced barbed tape (R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre. [Note: Cost of M.S. angle, C.C. blocks shall be paid separately]. 5460 PJESTO0175: STONE WORK : 5470 PJESTO0176: RANDOM RUBBLE MASONRY : 5480 PJESTO0177: Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cem ent : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 5490 PJESTO0178: Cement mortar 1:6 (1 cement : 6 coarse sand) 5500 PJESTO0179: Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling l evel and the like. 5510 PJESTO0180: Cement mortar 1:6 (1 cement : 6 coarse sand) 5520 PJEWAT1698: WATER SUPPLY : 5530 PJEWAT1699: CPVC PIPES : 5540 PJEWAT1700: Internal Work - Exposed on wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stabil ity for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per directi ons of the Engineer-in-Charge : 5550 PJEWAT1701: 15 mm nominal outer dia pipes 5560 PJEWAT1702: 20 mm nominal outer dia pipes 5570 PJEWAT1703: 25 mm nominal outer dia pipes 5580 PJEWAT1704: 32 mm nominal outer dia pipes 5590 PJEWAT1705: 40 mm nominal outer dia pipes 5600 PJEWAT1706: 50 mm nominal outer dia pipes 5610 PJEWAT1707: Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stab ility for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spa cing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good th e same including testing of joints complete as per directions of the Engineer-in-Charge : 5620 PJEWAT1708: 15 mm nominal dia pipes 5630 PJEWAT1709: 20 mm nominal dia pipes 5640 PJEWAT1710: 25 mm nominal dia pipes 5650 PJEWAT1711: 32 mm nominal dia pipes 5660 PJEWAT1712: External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solve nt cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge : 5670 PJEWAT1713: 15 mm nominal dia pipes 5680 PJEWAT1714: 20 mm nominal dia pipes 5690 PJEWAT1715: 25 mm nominal dia pipes 5700 PJEWAT1716: 32 mm nominal dia pipes 5710 PJEWAT1717: 40 mm nominal dia pipes 5720 PJEWAT1718: 50 mm nominal dia pipes 5730 PJEWAT1719: 65 mm nominal dia pipes 5740 PJEWAT1720: 80 mm nominal dia pipes 5750 PJEWAT1721: 100 mm nominal dia pipes 5760 PJEWAT1722: 150 mm nominal dia pipes 5770 PJEWAT1723: G.I. PIPES : 5780 PJEWAT1724: Internal Work - Exposed on Wall: Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutti ng and making good the walls etc. : 5790 PJEWAT1725: 15 mm dia nominal bore 5800 PJEWAT1726: 20 mm dia nominal bore 5810 PJEWAT1727: 25 mm dia nominal bore 5820 PJEWAT1728: 32 mm dia nominal bore 5830 PJEWAT1729: 40 mm dia nominal bore 5840 PJEWAT1730: 50 mm dia nominal bore 5850 PJEWAT1731: Internal Work - Concealed in wall: Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including mak ing good the walls etc. concealed pipe, including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall : 5860 PJEWAT1732: 15 mm dia nominal bore 5870 PJEWAT1733: 20 mm dia nominal bore 5880 PJEWAT1734: External Work: Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : 5890 PJEWAT1735: 15 mm dia nominal bore 5900 PJEWAT1736: 20 mm dia nominal bore 5910 PJEWAT1737: 25 mm dia nominal bore 5920 PJEWAT1738: 32 mm dia nominal bore 5930 PJEWAT1739: 40 mm dia nominal bore 5940 PJEWAT1740: 50 mm dia nominal bore 5950 PJEWAT1741: 65 mm dia nominal bore 5960 PJEWAT1742: 80 mm dia nominal bore 5970 PJEWAT1743: Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including c utting and threading the pipe etc. complete : 5980 PJEWAT1744: 25 to 40 mm nominal bore 5990 PJEWAT1745: 50 to 80 mm nominal bore 6000 PJEWAT1746: Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete. [Note: Cost of water meter and stop cock to be paid separately]. 6010 PJEWAT1799: BRASS FITTINGS : 6020 PJEWAT1800: Providing and fixing brass bib cock of approved quality : 6030 PJEWAT1801: 15 mm nominal bore 6040 PJEWAT1802: 20 mm nominal bore 6050 PJEWAT1803: Providing and fixing brass stop cock of approved quality : 6060 PJEWAT1804: 15 mm nominal bore 6070 PJEWAT1805: 20 mm nominal bore 6080 PJEWAT1806: Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 6090 PJEWAT1807: 20 mm nominal bore 6100 PJEWAT1808: 25 mm nominal bore 6110 PJEWAT1809: 32 mm nominal bore 6120 PJEWAT1810: 40 mm nominal bore 6130 PJEWAT1811: 50 mm nominal bore 6140 PJEWAT1812: 65 mm nominal bore 6150 PJEWAT1813: 80 mm nominal bore 6160 PJEWAT1971: C.P. BRASS FITTINGS : 6170 PJEWAT1972: Providing and fixing C.P. brass bib cock of approved quality conforming to IS-8931 : 15 mm nominal bore 6180 PJEWAT1973: Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms : 15 mm nominal bore 6190 PJEWAT1974: Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms : 15 mm nominal bore 6200 PJEWAT1975: Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS-8931 : 15 mm nominal bore 6210 PJEWAT1976: Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 : 15 mm nominal bore 6220 PJEWAT1977: Providing and fixing C.P. Brass extension nipple (size 15mm x 50mm) of approved make and quality as per directions of th e Engineer-in-Charge. 6230 PJEWAT1978: Providing and fixing following C.P. Brass central hole wash basin mixer with copper pipe/ pipes and brass nuts of size 1 5mm, etc. complete including cutting & making good the walls wherever required complete in all respects as per specifications and di rections of the Engineer-in-Charge : 6240 PJEWAT1979: C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-7171 Queens or approved equivalent) with 2 nos. x 10mm diameter & 450mm long copper pipes. 6250 PJEWAT1980: C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-167 or approved equivalent) with 1 no. x 10mm dia meter & 450mm long copper pipe. 6260 PJEWAT2382: Disinfecting C.I. water mains by flushing with water containing bleaching powder @ 0.5 gms per litre of water and cleani ng the same with fresh water, operation to be repeated three times including getting the sample of water from the disinfected main t ested in the municipal laboratory : 6270 PJEWAT2383: 80 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6280 PJEWAT2384: 100 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6290 PJEWAT2385: 125 mm diameter C.I. pipe. [Note: Unit M shall mean PER 100 METRE] 6300 PJEWAT2434: Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching pow der @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deductio n will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contr actor at his own cost and nothing extra will be paid on this account]. 6310 PJEWAT2435: Cleaning of underground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations: (1) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (2) Entire surface area of the sump shall then scrubbed thoroughly with wir e brush etc. and pressure washed with water. (3) Chlorination of RCC internal surface by liquid chlorine. (4) The treated surface sh all be dried using air jetting and all loose particles shall be removal from the surface. (5) Finally the surface shall be treated w ith ultra-violet radiation etc. as per direction of the Engineer-in-Charge. 6320 PJEWAT2436: Disconnecting damaged overhead/ terrace PVC water storage tank of any size from water supply line and removing from th e terrace including shifting at ground level as per the directions of Engineer-in-Charge. 6330 PJEWOO0237: Providing and fixing panelled or panelled & glazed shutters 35 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of the Engineer-in-Charge. [Note: Butt hinges and necessary screws shall be paid separately under relevant item of SOR] : 6340 PJEWOO0238: Second class teak wood 6350 PJEWOO0239: Kiln seasoned and chemically treated hollock wood 6360 PJEWOO0240: Kiln seasoned selected planks of sheesham wood 6370 PJEWOO0241: Providing and fixing panelled or panelled & glazed shutters 30 mm thick for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per directions of the Engineer-in-Charge. [Note: Butt hinges and necessary screws shall be paid separately under relevant item of SOR] : 6380 PJEWOO0242: Second class teak wood 6390 PJEWOO0243: Kiln seasoned and chemically treated hollock wood 6400 PJEWOO0244: Kiln seasoned selected planks of sheesham wood 6410 PJEWOO0245: Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS:14616 and TADS 15:20 01 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of the Engineer-in-Charg e and panelling with panels of: [Note: Butt hinges and necessary screws shall be paid separately] : 6420 PJEWOO0246: 12 mm thick plain grade-1, medium density flat pressed three layer particle board FPT-I or graded wood particle board FP T-I, IS:3087 marked, bonded with BWP type synthetic resin adhesive as per IS:848 : 6430 PJEWOO0247: 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, th ree layer particle board FPT-I or graded wood particle board FPT-I, conforming to IS:3087, bonded with BWP type synthetic resin adhe sive as per IS : 848 and pre-laminated conforming to IS:12823, Grade 1, Type-II marked. 6440 PJEWOO0248: 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing laminatio n) grade-1, medium density flat pressed, three layer particle board FPT-I or graded wood particle board FPT-1 conforming to IS:3087 bonded with BWP type synthetic resin adhesive as per IS:848 and pre-laminated conforming to IS:12823, Grade-1, Type-II marked. 6450 PJEWOO0249: Providing and fixing panelling or panelling & glazing for panelled or panelled & glazed shutters (25 mm to 40 mm thick s hutters) for doors, windows and clerestory windows [Note: Area of opening for Panel inserts/ Glass panes excluding portion inside gr ooves or rebates shall be measured for payment] : 6460 PJEWOO0250: Second class teak wood 6470 PJEWOO0251: Kiln seasoned and chemically treated hollock wood 6480 PJEWOO0252: Float Glass Panes - 4.0 mm thick (weight not less than 10 Kg/SQM) 6490 PJEWOO0253: Float Glass Panes - 5.5 mm thick (weigth not less than 12.5 Kg/SQM) 6500 PJEWOO0254: Fly proof Stainless Steel (Grade 304) wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beadi ng 6510 PJEWOO0255: 12 mm thick Exterior Grade-I MDF Board conforming to IS:14587, pre-laminated with decorative lamination on both side 6520 PJEWOO0256: 12 mm thick Marine plywood conforming to IS:710 6530 PJEWOO0257: 12 mm thick Fire retardant plywood conforming to IS:5509 6540 PJEWOO0258: Providing and fixing 35mm thick glazed shutters for doors, windows and clerestory windows using 4.0 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws : 6550 PJEWOO0259: Second class teak wood 6560 PJEWOO0260: Kiln seasoned and chemically treated hollock wood 6570 PJEWOO0261: Kiln seasoned selected planks of sheesham wood : 6580 PJEWOO0291: Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block bo ard construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands a nd face veneers on both faces of shutters : 6590 PJEWOO0292: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6600 PJEWOO0293: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 6610 PJEWOO0294: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws 6620 PJEWOO0295: Extra for providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shu tters conforming to IS:2202 (Part-I) : On one side only 6630 PJEWOO0296: Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (ov er all area of door shutter to be measured). 6640 PJEWOO0297: Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors. [Notes: (1) Cost of glass excluded. ( 2) Overall area of door shutter to be measured] : 6650 PJEWOO0298: Rectangular or square 6660 PJEWOO0299: Circular 6670 PJEWOO0300: Extra for cutting rebate in flush door shutters. [Note: Total area of the shutter to be measured]. 6680 PJEWOO0301: Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 6690 PJEWOO0302: 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size : 6700 PJEWOO0303: Second class teak wood 6710 PJEWOO0304: Kiln seasoned and chemically treated hollock wood 6720 PJEWOO0305: Kiln seasoned selected class of sheesham wood 6730 PJEWOO0328: Providing and fixing chromium plated brass curtain rods having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 6740 PJEWOO0329: 12 mm dia. 6750 PJEWOO0330: 20 mm dia. 6760 PJEWOO0331: 25 mm dia. 6770 PJEWPF2691: WATERPROOFING : 6780 PJEWPF2692: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of : (a) First course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS:2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (b) Second course of 20 m m cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (c) Third course of applying blown or residual bitumen applied hot at 1.7 Kg/ sqm of ar ea. (d) Fourth course of 400 micron thick PVC sheet. [Note: Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm]. 6790 PJEWPF2698: Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing ceme nt compound consisting of applying : (a) After surface preparation, first layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. (b) Laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 K g/sqm mixed with water proofing cement compound @ 0.670 Kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) Fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the pu rpose of measurement the entire treated surface will be measured. 6800 PJEWPF2699: Grading roof for water proofing treatment with : 6810 PJEWPF2700: Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6820 PJEWPF2701: Cement mortar 1:3 (1 cement : 3 coarse sand) 6830 PJEWPF2702: Cement mortar 1:4 (1 cement : 4 coarse sand) 6840 PJEWPF2703: Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers havin g Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @ 10.76 litre/10 sqm. One coat of self-priming of elast omeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid ( dry film thickness of complete application/ system not less than 500 microns). The operation shall be carried out after scrapping an d properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per directions of the Engine er-in-Charge. 6850 PJEWPF2704: Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC struc tures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ su bway and bridge deck etc., prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3:1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative ( internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrost atic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and directions of the Engineer-in-Charge. The product performance shall carry guaranteed for 10 years against any leakage : 6860 PJEWPF2705: For vertical surface two coats @ 0.70 kg per sqm per coat 6870 PJEWPF2706: For horizontal surface one coat @ 1.10 kg per sqm 6880 PJEWPF2707: Providing and applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterpro ofing polymers on interior wall plaster surface in three coats @ 14.35 Kg/10 sqm. One coat of self priming of cementatious waterproo fing polymer (dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in t he ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per 10 NRECIV0002: Through cleaning of paved and unpaved areas, roads, road side berms, broming removal of scraps and other unwanted left o ver materials including removal of chockage in the drains, removal of chockage from the road side / pave or unpaved area side drains and disposal of the rubbish etc. to the nearest garbage bin or as directly by Engineer-in-charge including laboures, broom, trolley and other consumables etc.complete. 20 NRECIV0003Cleaning the tiles, lavatory, flooring, urinals etc. by removing stains etc. by using Vim powder / cleaning powder / ISI g rade black phenyle / while phenyle / Acid /Naptha balls / Coir brushes / wire brushes Finit in required proportion to make the are a clean and free from all dust, dirt and stains etc. including cost of all labour and materials complete. (Only floor area shall be measured). 30 NRECIV0004Mopping of floors of offices, toilets, control rooms, electrical sub station etc. with soap solution or phenyle water with wet cloth after sweeping the floor with phooll broom, removing cob-webs with all tools, tackles, labour & materials etc. complete a s per directions of Engineer -in-charge including cleaning of ventilator glass panes from both the sides upto any height with cleani ng powder,paint remover as per requirement all labour, material etc.complete. 40 NRECIV0005Carrying out miscellaneous activities related to general maintenance like daily dusting the furnitures, walls shelves, cle aning the carpets, sofas, Cleaning and sweeping the stair case, passages, backyard, verandah, garrages, removal of cow webs, with al l labours, tools & tackles complete including supervising charges. (Unit EA shall mean carrying out above activities for 8 hrs. a day). 50 NRECIV0008Collection of Kitchen waste, dry waste & toxic waste in offices and colony from all Residential & Public Buildings, Execut ive Hostel, Staff Hostel, Canteen, Guest House, Club etc. The workmen shall collect the waste from each house & Public Buildings, se gregate the waste into biodegradable & non bio-degradeable waste and finally dispose them separately at designated place (Dumping Ya rd/ Pit) on daily basis as per requirement, with trained workmen, with all labour, tools, tackles, safety & protective clothes etc. complete as per direction of Engineer-in-charge. All consumables required including manpower, tools & tackles, PPEs, uniform to work men, etc. are to be supplied by Contractor without any extra cost and performing work as per item decription and direction of Engine er-in-Charge as well as instructions in Special Condition of Contract if any. Payment of Paddle Rickshaw (thela) will be made sepera tely. The unit MONTH (MON) shall mean per house/building per month 60 PJEDRA2588Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. [Note: Unit KL s hall mean KILO LITRE] 70 PJEHOR2828Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of eart h measured in stacks will be reduced by 20% for payment]. 80 PJEHOR2830Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note : Volume of cattle manure measured in stacks will reduced by 8% for payment]. 90 PJEHOR2835Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge. 100 PJEHOR2836Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, du mp manure and/or good earth shall be paid separately under relevant item of SOR]. 110 PJEHOR2861Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Asho kas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minim um complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge. 120 PJEHOR2898Cutting of hedge/ edge including removing of cut material, cleaning, hoeing of hedge/ edge, bed watering, manuring and app lying insecticides and fungicides etc. (excluding the cost of all materials) complete as per directions of the Engineer-in-Charge. [ Note: Unit SQM shall mean PER SQM PER MONTH.] 130 PJEHOR2903Pruning, trimming, shaping of trees/ shrubs (height 15 feet & above) and removal of cut materials up to 50m lead inclusive of all labour, T&P, materials etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TREE]. 140 PJEHOR2904Providing and watering of Horticulture features i.e. lawn, tree, shrubs, hedge/ edge, ground cover etc. with irrigation wa ter at the site of work. Watering shall be done through water tanker having 5000 litre capacity with one labour for watering includi ng cost of water, filling of tanker, watering at site with all leads and lifts as per direction of the Engineer-in-Charge. [Note: Un it EA shall mean PER TRIP]. 150 PJEHOR2908Cleaning and Sweeping of Lawn/ Garden area and keep it neat & clean by mechanized method/ manually, removimg litter, debri s, picking of leaves, papers, plastic bottles etc. including disposal of collected waste in dustbin/ designated place, as per direct ion of the Engineer-in-Charge. [Note: All T&P, materials/ articles shall be provided by the Contractor]. 160 PJEHOR2909Removal of garden waste by TATA 407 or equivalent capacity vehicle including loading/ unloading, carriage up to 1.0 Km lea d & disposal at designated place etc. complete as per direction of the Engineer-in-Charge. [Note: Unit EA shall mean PER TRIP]. 170 PJEWAT2434Cleaning of terrace/ loft water storage tank (inside surface area) up to 2000 litre capacity at all heights with coconut b rushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powde r @ 0.5gm per litre capaci ty of tank, including marking the date of cleaning on the side of tank body with the help of stencil and p aint and disposing of malba, all complete as per the directions of Engineer-in-Charge. [Note: The old date already written on tank s hould be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any G.I. fittings or ball cock is damaged that is to be repaired by the Contrac tor at his own cost and nothing extra will be paid on this account].

BRR : 8667568 Tender for Atal Bus Stand (C Type) At Rampur Under M.Rampur Block, Kalahandi.-- 1 CVL 2 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 3 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 4 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 5 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 6 First Floor 7 Second Floor 8 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 9 First Floor 10 Second Floor 11 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 12 First Floor 13 Second Floor 14 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 15 50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor 16 First Floor 17 50000076 Plinth protection with side brick masonry wall (1:4) inside sand filling over which 100 mm thick cement concrete using 40 mm coarse aggregate in prop (1:3:6) and over that, 50 mm thick cement concrete using 12mm to 19mm coarse aggregate in prop (1:2:4) with cement plastering (1:4) in proper slope. Ground Floor 18 50001152 Providing & fixing aluminium work (min.thickness of powder coating 50 micron) for structural glazing including required scaffolding for fixing the aluminium sections for extruded builtup standard tubural & other sections of approved make confirming to IS:733 and IS:1285 fixing with rawl plugs & screws or with expansion hold fasteners including necessary fillings up gaps at junctions at top,bottom & sides with cement mortar,aluminium sections shall be smooth,rust free ,straight,mitred & jointed mechanically,the glazing will be 5mm thick,coloured,reflective glass of approved colours & make (SAINT GOBAINI) fixed in aluminium sections upto required height & joints filled clear weather silicon sealant etc complete in all respect as per the direction of EIC/Architect in charge. Ground Floor 19 First Floor 20 Second Floor 21 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 22 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 23 First Floor 24 Second Floor 25 50001311 Fly Ash brick masonary in cement mortar 1:4:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 26 First Floor 27 50005074 Supplying, installing RO +UV+UF+TDS control+UV in-tank and zero water wastage technology with active cupper technology, wall mounted water purifier aquaguard capacity up to 20L/hr(Make KENT-grand star/Eureka Forbes)[N.S.W.I] Ground Floor 28 50010026 Supplying, Fitting and fixing of glass reinforced concrete(GRC) screens 30mm to 32mm thick (Dry density>1800 kg/cum) on wall (Wall cladding) and module of 1.5 sqm of approved quality/ pattern shall be synthetic rubber/ FRP moulded in size, pattern, design, colour and thickness. The screens made of 53 grade white cement make Birla/JK cement, quartz, fine silica sand, alkali resistance glass fiber, super plastisizer, polymers and UV resistant synthetic inorganic pigments etc. The screen shall be fixed by dry fixing method with appropriate SS pipe 304 grade ‘L’ shaped clamps & cleat, using fasteners and necessary hardware, etc. Including MS scaffolding in building façade. The rate shall be included the structural steel frames (Horizontal & vertical members) support to hold the GRC jalli at required building height to withstand wind pressure as per IS 875(prt-3):2015. The cost includes labour, materials, transportations, T&P, etc. all complete as per direction of Engineer-in-Charge. The screen must have compressive strength>400kg/cm2 ,wet transverse strength > 7 N/mm, thermal conductivity1.63 W/m-K at 3% moisture content, water absorption<(><<)> 5% of dry weight. [NEW-NSWI] Ground Floor 29 First Floor 30 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 31 First Floor 32 Second Floor 33 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 34 First Floor 35 Second Floor 36 50010384 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC SILL BAND) Ground Floor 37 First Floor 38 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 39 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 40 First Floor 41 Second Floor 42 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 43 First Floor 44 Second Floor 45 50010432 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC STAIRCASE) Ground Floor 46 First Floor 47 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 48 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 49 First Floor 50 Second Floor 51 50010458 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement. (FOR RCC FINS) Ground Floor 52 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 53 First Floor 54 Second Floor 55 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 56 First Floor 57 Second Floor 58 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 59 First Floor 60 Second Floor 61 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 62 First Floor 63 Second Floor 64 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 65 First Floor 66 Second Floor 67 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 68 First Floor 69 Second Floor 70 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 71 First Floor 72 Second Floor 73 50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor 74 First Floor 75 50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor 76 First Floor 77 50010704 Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej). Ground Floor 78 First Floor 79 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 80 First Floor 81 Second Floor 82 50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Second Floor 83 50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor 84 First Floor 85 50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor 86 First Floor 87 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 88 First Floor 89 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 90 First Floor 91 50011406 Providing and fixing of factory-made 3Track 3Panel UPVC Sliding window (White Colour) frame size 128X50mm and Sash size 45X70mm complete up to and including 1.5m high, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 5mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 5 mm clear Toughened glass in the sash, UPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep glass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 92 First Floor 93 50011416 Providing and fixing of factory-made 2Track 2Panel UPVC Sliding window/Door (White Colour) frame size 70X50mm and Sash size 45X74mm complete above 1.5m high, comprising UPVC multi-chambered frame having in-built UPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber.The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm.UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 6mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 6 mm clear Toughened glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock &Multi Lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep gl ass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 94 First Floor 95 50011456 Supplying, Fitting & Fixing of full body Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 1200mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 96 First Floor 97 50011486 Supplying, Fitting & Fixing of Anti-Skid Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 600mm x 9 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY TECHSTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 98 First Floor 99 50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 100 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Second Floor 101 50011948 Supply and installation of ZMS (Nylon)/Vibrance Serene series cubicles of width and depth as per specifications/ site drawings and height of 2000mm. The cubicle is made from solid grade 12mm thick compact high pressure laminate as per IS:2046 and EN-438 manufactured under high specific pressure > 5 MPa and temperature >120°C with bunch of kraft papers impregnated with thermosetting phenolic resin and decorative papers made of Alpha cellulose fiber impregnated with thermosetting melamine resin which provide superior scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance along with anti-bacterial properties. Panels have a black core that when machined, presents a distinctive black edge. All doors of size 600x1800mm will be of single colour and made of 12 mm thick HPL compact panel. The doors will have chamfered edges. Each door will be supported by 3 nos Nylon PA-6 made hinges affixed to the pilasters. Nylon PA-6 made coat hook and lock set are provided with each door. All pilasters will be made of 12 mm thick HPL compact panel with chamfered edge and completed with stainless steel made thumb turn lock set. Aluminum made door stopper profiles with rubber linings for dampening the noise while door closing will be provided at the vertical ends of the pilasters. Pilasters will be anchored to the floor using Nylon PA-6 made adjustable legs. The bottom gap is 150 mm. All intermediate partitions or dividers of 1800mm hight will be made of 12 mm thick HPL compact laminate panels. They are affixed with aluminium made U-channel at their ends for ultimate stability of the system. The Semi-spherical (Top) head frame structure for surface protection of size to be 50x32x1.6T, Corner joinery section size to be 40x16.5x1.8T,U-Channel Wall joinery section size to be 22x16x1.6T,Door stopper section size to be 21x12.5x1.6T. Nylon Polyamide grade-6 Adjustable Pedestal Footing of base minimum diameter 70 mm, giving a clearance height of 150mm. Self closing Hinges (Gravity mechanism) made from Nylon Polyamide grade-6. Round Coat hook with base diameter 53 mm made from Nylon polyamide grade-6. Round Door knob diameter 48 mm with thumb-recess made from Nylon polyamide grade-6. Rotating Thumb-turn locking system with privacy indicator locking system made from Nylon polyamide grade-6, Anti-noise rubber padding, Stainless steel grade 304 screws, Anti-rotation Nylon polyamide grade-6 expandable wall plugs. The cost includes supply, installation, transportation, handling charges completely. Make complete set:MERINO/GREENLAM Ground Floor 102 First Floor 103 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 104 First Floor 105 50012200 System Aluminum Casement System Doors – Double Leaf Swing single glazed door Providing and fixing System Aluminum works for casement systems door having door frame 55mmx40mm, shutter 70mmx40mm, door bottom transom 150mmx40mm, central profile 47.3x42.9mm, grazing bead 31.8mmx17.85mm with glazing of single glass panel without middle transom made of non-euro groove architectural aluminium profile. The extruded aluminums sections should be T6 tempered made from Grade 6063 alloy, approved shade of pure-polyster/ hybrid surface coating Anodized (50-60-micron powder coat), silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. The drainage slots provided at the bottom part of the frame/sash on the outerside & weather strip siliconased brush gasket will be provided. 6mm Clear Toughend Glass (Saint-Gobain / AIS) infill fitted unto Sash/Frame using micro-wave treated siliconised EPDM gasket. The casement systems having hardwares SS handle (22mmx300mm), mortise lock with both side key cylinder, floor spring. Wall Thickness - Aluminium: 1.5mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. This cost includes labour, materials, wastage, transportation at site, fixing, fittings, etc. all complete. (Make :- FENESTA/ REKLAD) Ground Floor 106 50012828 Supply and fixing of MCM Modified Clay Material ‐ MCM A 300X600 mm of PHOMI make,as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 and European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in‐charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in‐charge. Make-Phomi Ground Floor 107 First Floor 108 50013261 Providing, Fixing & Fitting Ceramic glazed tiles (SUPER PREMIUM QUALITY) on wall of size 300mmx600mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect. (JOHNSON/SOMANY/KAJARIA) [NSWI] Ground Floor 109 First Floor 110 EPH 111 10000556 Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200cfm/300psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories,tools and plant and consumables etc for lowering of 200mm dia PVC pipes for housing fitted with socket and with or without well screen as per tenecessity for soft,medium,hard and boulder formation (PVC casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and with drawing after completion of the tube well).(Icluding both LABOUR FOR DRILLING 200MM DIA UPTO 30 MTR. & LABOUR FOR DRILLING 150MM DIA FROM 30 MTR TO 150 MTR including all.) CONSIDER FOR 150 MTR DEPTH. Ground Floor 112 10000564 Lowering 200mm dia. PVC pipes with or without slotted pipes as per the necessity from ground level with fitting and fixing the same in a perfectly vertical position. This includes cutting, threading pipes/slotted pipes with providing and fixing of required jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells so as to prevent entry of foreign materials from above. (FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG). Ground Floor 113 10000570 Cleaning and developing 200mm dia. tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour .(FOR HAMMER DRILLING RIG/ COMBINITION DRILLING RIG). Ground Floor 114 10000583 Supplying and fixing of control panel board with all accessories. (UPTO 3HP SINGLE PHASE) Make: KSB Ground Floor 115 10000588 Supplying and fixing of HDPE Pipes 32/40 mm (High Density Polyethylene pipes having inner dia. 32mm and outer dia. 40mm) 6Kg/Sq. cm With IS specification.(32MM NOMINAL BORE SIZE). Make Finolex/Oriplast/Supreme. Ground Floor 116 10000594 Supplying and fixing of PVC coated steel rope including cost of material, labour etc. complete. Make-Mahdev/Aerolex Ground Floor 117 10000596 Supplying and fixing of Finolex/L&T/Cable 4 Sq. mm (3core copper wire flat cable with PVC insulation). Ground Floor 118 10000600 Supplying and fixing of accessories like Nipple, Bore cover, MS clamp, Nut Bolt, Stainless steel nipple, Short piece, GI bend, Socket etc. complete. Ground Floor 119 10000602 Installation charges pump set with all accessories including transportation etc. Ground Floor 120 10001184 Supplying of 200mm inner dia. PVC casing pipe for deep bore well CD (deep well casing) type basing on IS-12818-2010, wall thick ness 13mm to 14.8mm with One end of the pipe is male-threaded whereas the other end is a female-threaded socket. Threads are either V-type or trapezoid-type, and protection caps are provided on the threads to protect the threads in transit. With pressure ratings ranging from 7.5 to 20 bar (PN). Make: ORIPLAST/SUPREME/FINOLEX Ground Floor 121 10001190 Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.1.5HP, Single phase,32D,19 Stage (head 50-129m). Make: KSB(2C/21). Ground Floor 122 10001204 Supplying Submersible Pump Set with the cost of Motor of following model including cost of transportation charges.7.5HP, Three phase, 100x75, Open well (head 14-29m) make: KSB ( MR7.5A/50X40X45) Ground Floor 123 FUR 124 50010482 Supply and fixing of GODREJ MAKE EXECUTIVE CHAIR WITH HEADMODEL NO- Aero (Large Seat) Black Ink Color FK01(56101522SD04692) +(561015 22SD04353).[NSWI] Ground Floor 125 50010484 Supply and fixing of GODREJ MAKE EXECUTIVE CHAIR WITH HEADMODEL NO- OXBO MID BACK CHAIR 7502RGC01 Black Ink Black56101522SD03157.[NSWI] Ground Floor 126 50011783 Supplying and installation of work station table of size 1050x600x750mm(H) having 25mm thick pre-laminated particle board top with 2mm thick PVC edge leaping on all exposed edges. The legs of the tables have 60x40mm and beams are 40x20mm MS powder coated. The vertical raceway with built in separator for power and data of size 250mmx70mm thick with provision to mount switches and sockets on laminate facia with vertical wire entry cover for wire uptakes from floor to raceway of 65mm dia wire manager grommet in complete set are provided. Make: Featherlite (HSN code-94031090) Ground Floor 127 50013340 Supplying and instllation of dining chair having Seat and Back made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Make: GODREJ ,Model-UNWIND, HSN CODE-94016900 Ground Floor 128 50013568 Supplying and installation of Table without CPU Hanger size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 and MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . Make: Godrej ENTERPRISE, HSN CODE-94031010 Ground Floor 129 50014300 Storage Unit:Slimline 2 Door with full locker 1900H X 900W X 507D Supplying and placing in position Home storage Unit.900mm(W)x507mm(D)x1950mm(H) (Height without leveler). Construction & Material-Aesthetically appealing Slimline, completely knock down construction. Removable Skirting to cover integral legs. Legs fitted wit h screw type leveler Made from combination of CRCA 0.8 mm & 0.6 mm Thickness. Main Door Steel Hinged Door. Main Door Locking / handle: Handle & Base Aesthetically appealing, Ergonomic, flush with door made from Zinc alloy. 3 way 90 Degree Removable key type Cam lock & locking mechanism. Locker Door & it’s locking / handle for Model ‘H’ .Fixed Half locker on RH side Hinged Door 2 way Cam lock with Knob type handle Shelving: • Finish: Epoxy Powder coated to the thickness of 50 microns (+-10).HSN CODE-94032090 Ground Floor 130 50014302 Chair:Traverse 3 Seater 2 arms Providing, supplying and placing of waiting chair.SEAT/BACK SHELL: It is powder-coated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness with circular perforations.The Side Bar is made of cold rolled M.S.sheet 0.12 ± 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts. SEAT SIZE : 50.0 cm (W) x 45.5 cm (D) BACK SIZE : 50.0 cm (W) x 56.0 cm (H)CROSS BEAM: It is made up of cold rolled steel with 0.2 ± 0.02 cm thickness. The crossbeam is powder coated. It is covered with plastic end caps LEG: It is made up of cold rolled steel with 0.12 ± 0.013 cm thickness. It is powder coated. The legs are fitted with leveller cups covered with SS304 sheet. ARMREST: It is made of SS304 round tube of Ø 3.175 ± 0.03cm x 0.12 ± 0.013 cm thick formed to make an oblong shape.WIDTH (W): 173.5 CM.DEPTH (D): 74.0 CM.HEIGHT (H): 91.0 CM SEAT HEIGHT (SH): 44.0 CM.HSN CODE-94031010 Ground Floor 131 50014304 Storage Unit:Pigeon Hole Base Supplying and placing in position Storage unitOverall Dimensions of Pigeon Hole Base 1800 H Main Modish Oak shall be 582mm(W)x400mm(D)x1200mm(H) . TheConstruction shall be Rigid Knock Down Construction . Material used shall be all side panels , top/bottom panels and shelf panels shall be made from 18 mm thick Pre- Laminated Board (interior grade) with 2 mm thick PVC edge beading . Back panel shall be made from 9 mm thick Pre- Laminated board . Stackability shall have Add on units stacked width wise to form a bank of racks having common side panel (max . 6 Add ons) . The shelfs shall be 6 Main Module has 12 shelves placing in 270 mm distance , 4 Main module has 8 shelves placing in 270 mm distance . The Configuration shall have 6 Main Module , 4 Main Module also 6 Add on module , 4 Add on module .HSN CODE-94031010 Ground Floor 132 50014306 Chair:Unwind with Desklet Providing, supplying and placing of chair with desklet.The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. The Armrest should be made of indoor grade PolyPropylene compound and assembled over the tubular frame. The L shaped desklet should be made of 1.8+-0.05cm thick prelaminated particle board with 0.2+-0.05cm thick injection moulded poly proplylene all around. Desklet should have back and front adjustment of 4.4+-0.5cm. The paper tray should be made of 0.4mm thick MS rod which is spot welded to form a mesh like structure. Overall Dimensions of Chair Seat Height - 45.0 cm. Height - 84.5cm. Width-57.5 cm and Depth-67.8 cm.HSN CODE-94016900 Ground Floor 133 50014308 VFC Filling Cabinet 1320H x 470W x 620D Supplying and placing in position Filling Cabinet Vertical Filing Cabinets whcih use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 ‘Ezee’ / ‘Visa’ files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50.HSN CODE-94031010 Ground Floor 134 50014310 Bed:APO Bunk Bed+Mattress with Pillow Providing, supplying and placing of Bunk Bed BED FRAME BED FRAME ASSEMBLIES 2 NOS. ARE WELDED OF SIDE FRAME & INNER SLAT. THE SIDE FRA ASSEMBLY ARE MADE OF RECT. TUBE 50.8 x 25.4 X 1.2MM. ASSEMBLY INNER SLAT IS SQ. TUBE OF 25.4 X 1.2 MM THK MS ERW TUBE IS:7138 GRADE.HEAD BOARD & TAIL BOARD MOSOITO ROD:-HEAD BOARD & TAIL BOARD ARE MADE UP OF SO. PIPE 38.1 X 1.6MM THK, SQ 25.4 X 1.2MM THK MS ERW TUBE IS: 7138 GRADE SUPPORT BRACKET 3.2MM THK MS SHEET IS: 513 AND CONNECT WITH BED FRAME WITH MA NUT &BOLT,MOSQUITO ROD OF $19.0 X 1.0 MM THK MS ERW TUBE TO BE FIT IN #22 X 1.0MM THK MS ERW TUBE & BOTH TUBE IS OF IS: 7138 GRADE, HOOK IS PROVIDED AT THE TOP OF ALL ROD. LADDER ASLY - LADDER ASSY IS MADE UP OF RECT 50.8 X 25.4 X 1.2MM THK & SO. 25.4 X 1.2MM THK MS ERW TUBE IS: 7138 & CONNECTED WITH BED FRAME SIDE SUPPORT :- SIDE SUPPORT IS MADE OF #25.4 X 1.2MM THK & #19 X 1.2MM THK TUBE CONNECTED WITH BED FRAME USING MB NUT & BOLT. CLADDING -12mm THK PLY.HSN CODE-94032090 Ground Floor 135 50014312 Providing, supplying and placing of Personal Locker Product Size - 375(W) x 470(D) x 1950*(H) *Height including leveler* Height of leveler is 50mm and adjustment possible is 15mm. Construction & Material - Aesthetically appealing completely knock down construction.The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main +1Addon to be offered, Maximum 1Main + 4Addon to be offered) Legs fitted with screw type leveler. Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). ** - CRCA D Grade as per IS- 513 - CRCA D Grade as per IS-513Doors (Without envelope slot) - Made from 0.6mm Thick CRCA (D Grade, IS-513) Soft closing hinge.Door size - For 4 Door locker - 373(W) X 18(T) X 473(H)Cam Lock - Oval knob that functions as a handle- Click action mechanism- Key removal in locked and unlocked position- Zinc alloy die cast housing Shelving - 3 Shelves for 4 Door locker without envelope slot.HSN-94031010 Ground Floor 136 50014314 Cafepod Table Supplying and placing in position cafeteria table of the following specifications with size shall be 800 Width mm x 800 Depth mm x 742.5 Height mm . The top shall be stainless steel top of size : 800 mm x 800 mm x 1.2 mm thick . Top Assembly shall be 24 mm thick also top shall be made from 1.2 mm thick SS - 304 Brushed steel finish sheet . The Welded Stiffener assembly made from 0.6 mm thick SS - 304 sheet glued with top with special glue .Understructure shall be foldable and stackable , made with combination of aluminium and plastic . Centre column is of Aluminium extrusion of diameter 70 mm , which is anodized . Base is made in 2 pieces of die cast aluminium with buffed finish . It is bolted together with centre column and top flange .HSN CODE-94031010 Ground Floor 137 IPH 138 10000314 Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification.Porcelin 23 inch LWC(ORISSA Pan) Ground Floor 139 10001056 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 20 mm outer dia CPVC pipes. Ground Floor 140 10001058 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 25 mm outer dia CPVC pipes. Ground Floor 141 10001060 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 40 mm outer dia CPVC pipes. Ground Floor 142 10001062 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 50 mm outer dia CPVC pipes. Ground Floor 143 10001064 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method; water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid for separately). 110mm dia. SWR pipe of Single Socket Push fit of class-3 (6Kg/Sq.cm). Make:- ORIPLAST/SUPREME/FINOLEX. 110mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 144 10001066 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method with water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid separately). 160mm dia. rigid UPVC SWR pipe Class- 3 (6Kg/Sq.cm). Make: ORIPLAST/SUPREME/FINOLEX. 160mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 145 10001068 Providing and fixing on wall face PVC 110 mm dia. offset SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. offset PVC SWR type. Ground Floor 146 10001070 Providing and fixing on wall face 110mm dia. single junction with door PVC SWR type moulded fittings, accessories for Rigid UPVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion . Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Single Junction with door PVC SWR type. Ground Floor 147 10001072 Providing and fixing on wall face 110mm dia. plain bend PVC SWR type moulded fittings / accessories for Rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Plain Bend PVC SWR type. Ground Floor 148 10001074 Providing and fixing on wall face 110mm dia. bend with door PVC SWR type moulded fittings / accessories for rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Bend with door PVC SWR type. Ground Floor 149 10001076 Providing and fixing on wall face 110 mm dia. cowel PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. cowel PVC SWR type. Ground Floor 150 10001088 Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification with 1:4 brick work in cement mortar (1:4) and 12mm thick cement plaster. For 250mm thick wall. Ground Floor 151 10001094 Cutting holes in R.C.C floor and roofs up to 19cm thick for passing G.I/PVC pipes and fittings etc. and repairing the hole after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm. Ground Floor 152 10001096 Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete, with cement concrete (1:3:6) and 12mm cement plaster (1:3) along with Cement punning. Ground Floor 153 10001098 Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX 110mm Dia Inlet & Outlet floor trap PVC SWR type. Ground Floor 154 10001100 Providing and fixing EWC Commode floor mount(S/P trap) conforming to IS 2556: Part 3- 2004 duly fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification without cistern - Long pattern size 575x345x390mm. Make: Hindware POPULAR (CAT NO-20044 S-TRAP-28.5/P-TRAP-18.0)/Parryware ELITE (P-TRAP-CO278/S-TRAP-CO297) White Vitreous China Wash Down Water Closet (EWC). Ground Floor 155 10001102 Fixing of Back to wall WC with UF soft close seat cover, hinges, accessories set with rack bolt 12mm dia stainless steel Size(360x51 5x410mm) (FOR DISABLED) Floor Mounted to the floor fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification WITHOUT CISTERN. make: JAQUAR (DIS-WHT-9 3955P180UF)/ KOHLER(K-2983IN-S-O) DISABLED PERSON COMMODE Ground Floor 156 10001116 Providing and Fixing PVC LOW LEVEL CYSTERN conforming to IS 2556 : Part 3- 2004 SIZE 415X130X305mm.Make: Hindware SUPERB (CAT NO-50 8829)/Parryware SLIMLINE ECONOMY (E-8090).White Vitreous china 10 litre (full flush) capacity manually controlled low level flushing cistern with all fittings and fixtures. Ground Floor 157 10001118 Providing and fixing stainless steel kitchen sink with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Size 600X450X225mm Steel Sink Matt single bowl. Make: (Parry ware(C857272)/Hindware(KS FLAMINGO)). Stainless steel kitchen sink - 600X450X225mm Single bowl. Ground Floor 158 10001122 Providing and fixing of Standing urinal including connecting the urinal with 32mm dia. PVC waste pipe by means of white lead mixed with chopped hemp,15mm dia. PVC Reinforced heavy duty connection pipe etc. all complete as per specification. (White vitreous china clay half stall urinal flat back size-355X345X535 mm. Make: JAQUAR(URS-WHT-13261). Standing Urinal 355x345x535mm. Ground Floor 159 10001124 Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 160 10001126 Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 161 10001132 Providing and fixing of 15mm dia. CP Screw-down two way Bib Cocks (Taps)polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux headand high quality). Make: JAQUAR( CON-041KN)/ KOHLER (K-25432IN-4-CP). 15mm dia. Two-way Short body bib cock. Ground Floor 162 10001134 Providing and fixing of 15mm CP dia. Screw-down long body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR( CON-107KN)/ KOHLER (K-27490IN-CP) 15mm dia. Long body bib cock. Ground Floor 163 10001136 Providing and fixing of 15mm dia. CP Screw-down angle Stop Cocks with flange of the following nominal sizes as per specification complete. (Deluxe Head and high quality). Make: JAQUAR (CON-059KN))/ KOHLER (K-11568IN-7B-CP). 15mm diameter Angle Stop Cock. Ground Floor 164 10001138 Providing and fixing of Screw-down 15 mm CP concealed Stop Cock with fitting sleeve, operating lever and adjustable wall flange and concealed body conforming to of the following nominal sizes as per specification complete. (Deluxe Headand high quality). Make: JAQUAR-(CON-083FTK+ALD-083FT). 15mm diameter Concealed Stop Cock. Ground Floor 165 10001140 Providing and fixing of 15mm dia. CP overhead shower rose 100mm round with rubit cleaning system including polishing all complete as per specification.(Deluxe Head and Heavy quality). Make: JAQUAR (OHS-1989)/ KOHLER (K-163561N-A-CP). 100 mm diameter / 15 – 20 mm width shower rose. Ground Floor 166 10001142 Providing and fixing of 15mm dia. CP shower arm 160mm long light body round shape for wall mounted with flange. including polishing all complete as per specification. (Deluxe Head and Heavy quality). Make: JAQUAR (SHA -477)/ KOHLER (K-99054IN-CP). 15 mm x 160 mm long size CP shower arm. Ground Floor 167 10001146 Providing and fixing of health faucet with 1.2m long PVC tube and wall hook. Make: JAQUAR (ALD-563) including all complete as per specification. 1.2m long PVC tube CP health Faucet. Ground Floor 168 10001148 Providing and fixing Stainless Steel soap dish holder fixed to head less socket caps, wall plugs with CP brass screws as per specification. Make: JAQUAR (ACN-1131N))/KOHLER (K-10712D-CP). Stainless Steel Soap Dish Holder. Ground Floor 169 10001150 Providing and fixing of 600x120 mm glass Shelf with anodised aluminium angle frame with chromium plated brassbrackets and guard rails of required size complete, fixed to head less socket caps, wall plugs with chromium plated brass screws as per specification. Size 600x120 mm glass shelf. Make: AQUAR-(ACN-1171N)/ KOHLER(K5636IN-CP). 600mmX120mm Glass Self. Ground Floor 170 10001152 Providing and fixing standard sized stainless steel towel rail of 600mm long complete with Chromium Plated brass brackets; fixed to head less socket caps, wall plugs with Chromium Plated brass screws, complete as per specification. (Make: JAQUAR (ACN-1111SM)/ KOHLER (K-5630IN-CP),(Heavy quality). 25 x 600 mm long SS Towel Rail. Ground Floor 171 10001154 Providing and fixing standard sized stainless steel towel ring with round flange complete with Chromium Plated brass brackets; fixed to head less socket caps/wall plugs with Chromium Plated brass screws, complete as per specification. Make: JAQUAR (ACN-1121BN) /KOHLER (K-5631IN-CP). SS Towel ring with round flange. Ground Floor 172 10001158 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to head less socket caps, wall plugs and washers complete as per specification.(AR-2013,SL. NO.-3.4.26). Make: Mirror Glass (SAINT GOBIN/AIS(ASAHI)). 600mm x450mm Bevelled Edge Mirror (Heavy quality). Ground Floor 173 10001160 Providing and fixing Rotational moulded polyethylene cylindrical vertical water storage tank 3layer wall conforming to IS : 12701--1996 including cutting holes through the tank and fixing, fittings CPVC tubes and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting up to a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification. Make: SINTEX/SUPREME/ORIPLAST. Triple Layer Cylindrical Vertical water storage tanks. Ground Floor 174 10001166 Fixing wash basins WITHOUT PEDESTALwith hole for pillar taps with 10mm dia M S rack bolt (JAQUAR MAKE) painted white including cutting holes in walls and making good the damages etc all complete, with fixing of 15mm dia pillar cock, as per specification.(Vitreous china flat back wash basin 550x400x200 mm)(CODE CNS-WHT-801 JAQUAR MAKE).Pillar cock(CON-021 JAQUAR)32mm full/half thread CP waste(ALD-705/709-JAQUAR), Rack bolt(ZPS-MST-RB03)Vitreous china flat back wash basin 550x400x200mm . Ground Floor 175 10001170 Providing and fixing of Metropole flush valve dual flow,32mm concealed body with exposed shutoff provision and 100mm square plate, 3.0/6.0 litre per flushing. Make: JAQUAR (FLV-1085 NSQ),fixing accessories with accessories set. Concealed Flushing Cistern. Ground Floor 176 10001172 Providing and fixing of 692mm long stainless steel grab bar handle (FOR DISABLED)fixed to head less socket caps, wall plugs and chromium plated screws as per specification . Make: JAQUAR (WAC-WHT-BR0600N) 692mm long stainless steel grab bar handle. Ground Floor 177 10001174 Providing and fixing of stainless steel vertical swing grab bar (FOR DISABLED) fixed to head less socket caps, wall plugs and chromium plated screws as per specification. Make: JAQUAR (WAC-WHT-BG0800N) Stainless steel vertical swing grab bar. Ground Floor 178 10001209 Providing and fixing curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish size H:900XW:450mm with stainless Steel brackets including cutting holes in wall and making good the damages etc. complete as per specification. Make: JAQUAR (JSE-CHR-110UC450X/110US450X). Curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish. Ground Floor 179 MIS-CVL-Area Concr 180 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 181 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 182 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 183 50001782 Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials, bitumen and cement propertion(3:1), including cleaning before pouring 12mm to 25mm and 15 cm depth. Ground Floor 184 50011616 Providing and laying in position R.C.C. M-25 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work,<(>,<)> including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability. Without cost of reinforcement(FOR COLUMN FOOTING) Ground Floor 185 50013548 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. Ground Floor 186 MIS-CVL-Area Pavin 187 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 188 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 189 50001701 Providing and laying 80 mm thick Factory made cement concrete interlocking Paver block of M40 grade made by block making machine with strong vibratory compaction and approved size and design/ shape laid in required colour and pattern over and including 50 mm thick compacted bed of coares sand, filling the joints with coarse sand etc. all complete as per the direction of Engineer-In-Charge. Ground Floor 190 50011883 Construction of Granular Sub-Base (Gr-IV) by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401of MoRT&H specifications for Road & Bridge Works (4th Revision). Vide AR-2006, Page-160,Item-39 . Ground Floor 191 50013548 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. Ground Floor 192 MIS-CVL-Boundary w 193 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 194 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 195 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 196 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 197 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 198 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 199 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 200 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 201 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 202 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 203 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 204 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 205 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 206 MIS-CVL-Bus Washin 207 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 208 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 209 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 210 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 211 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 212 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 213 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 214 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 215 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 216 MIS-CVL-CC Road 217 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 218 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 219 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 220 50001782 Filling bitumen and cement and jute fibre in expansion joints inclusive of cost of materials, bitumen and cement propertion(3:1), including cleaning before pouring 12mm to 25mm and 15 cm depth. Ground Floor 221 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 222 50011101 Providing and laying in position 200mm thick Tremix/VDF flooring P.C.C. M-30 grade concrete using 20mmnominal size HBG down graded chips for plain cement concrete work using cement content 400kg/cum as per approved design mix having continious agitated mixer,mis design of specified grade for reinforced cement concrete work and for VDF floorng using screed board vibrator,placing of filtermat(nylon cloth to act as very fine filter),top mat (large single PVC sheet),Vaccume process using vaccume pump about 0.08MPA which ruduces water content about 15-20% ,power trawelling,brooming,T&P Charges including power,loading,unloading and hire charges,making grooves of 6mm wide and 25mm deep @ 1.5m C/C both ways ,filling the joints with sealing compound of approved quantityGrade-A(Ref:DSR-SH 16.46.1) with cost of material ,labour,conveyance,royalty etc. complete basing on IS 256:2000 minimum slump is 25mm to 75mm and minimum thiockness is 125mm . Ground Floor 223 50011103 Painting runway/taxi/track/apron marking with adequate nos of coats (minimum 2coats) to give uniform finish with road marking paint Based on solvent based acrylic resin has UV resistant colours of superior make (water based) i/c cleaning the surface of all dirt scales, oil, grease and other foreign material etc. and lining out complete. For new road work. Ref: DSR-16.47.1.Make(Asian paints:APCOTRAK, Berger:ROAD MARKING PAINT, Dulux :PROFESSIONAL WEATHER SHIELD ANTI-CARB)[NEW-NSWI] Ground Floor 224 50011883 Construction of Granular Sub-Base (Gr-IV) by providing material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401of MoRT&H specifications for Road & Bridge Works (4th Revision). Vide AR-2006, Page-160,Item-39 . Ground Floor 225 50013548 Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. Ground Floor 226 MIS-CVL-Cow Catche 227 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 228 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 229 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 230 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 231 50005727 Prividing,Fittin & fixing of cow catcher,made out of steel work (TATA make GI pipe circular hollow of 100 mm OD as per IS 1239[P-1] 4 mm thick) including RS joist of size ISLB 150X80 with cutting requird size ,welding using MS flat of 40X6mm size,fixing in position with approvd design and specification including all fitings and applying a priming coat of approvd steel primer etc all complete as per the direction & instruction of the Engineer-in-charge of the work.DATA FOR size 16X5= 80 sft Ground Floor 232 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 233 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 234 50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor 235 MIS-CVL-DG Shed 236 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 237 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 238 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 239 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 240 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 241 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 242 50000884 Enamel painting two coats including cost of all materials cleaning,brushes,putty etc. Ground Floor 243 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 244 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 245 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 246 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 247 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 248 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 249 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 250 50011936 Supplying and fixing of TATA Blue scope Steel Sheet Roofing of 0.52 mm thick as per attached Quoatation in roof drilling holes in wind ties including fixing of ridges valleys wind ties and cost of fittings.[NEW-NSWI] Ground Floor 251 MIS-CVL-Drivers R 252 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 253 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 254 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 255 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 256 First Floor 257 Second Floor 258 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 259 First Floor 260 Second Floor 261 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 262 First Floor 263 Second Floor 264 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 265 50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor 266 First Floor 267 50000568 Kotah stone flooring in floors,treads rise and landing on 25mm thick bed of cement mortar 1:1 jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing etc complete including cost of tile, material, labour T & P etc complete. Ground Floor 268 50001152 Providing & fixing aluminium work (min.thickness of powder coating 50 micron) for structural glazing including required scaffolding for fixing the aluminium sections for extruded builtup standard tubural & other sections of approved make confirming to IS:733 and IS:1285 fixing with rawl plugs & screws or with expansion hold fasteners including necessary fillings up gaps at junctions at top,bottom & sides with cement mortar,aluminium sections shall be smooth,rust free ,straight,mitred & jointed mechanically,the glazing will be 5mm thick,coloured,reflective glass of approved colours & make (SAINT GOBAINI) fixed in aluminium sections upto required height & joints filled clear weather silicon sealant etc complete in all respect as per the direction of EIC/Architect in charge. Ground Floor 269 First Floor 270 Second Floor 271 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 272 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 273 First Floor 274 Second Floor 275 50001311 Fly Ash brick masonary in cement mortar 1:4:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 276 First Floor 277 50005074 Supplying, installing RO +UV+UF+TDS control+UV in-tank and zero water wastage technology with active cupper technology, wall mounted water purifier aquaguard capacity up to 20L/hr(Make KENT-grand star/Eureka Forbes)[N.S.W.I] Ground Floor 278 50010026 Supplying, Fitting and fixing of glass reinforced concrete(GRC) screens 30mm to 32mm thick (Dry density>1800 kg/cum) on wall (Wall cladding) and module of 1.5 sqm of approved quality/ pattern shall be synthetic rubber/ FRP moulded in size, pattern, design, colour and thickness. The screens made of 53 grade white cement make Birla/JK cement, quartz, fine silica sand, alkali resistance glass fiber, super plastisizer, polymers and UV resistant synthetic inorganic pigments etc. The screen shall be fixed by dry fixing method with appropriate SS pipe 304 grade ‘L’ shaped clamps & cleat, using fasteners and necessary hardware, etc. Including MS scaffolding in building façade. The rate shall be included the structural steel frames (Horizontal & vertical members) support to hold the GRC jalli at required building height to withstand wind pressure as per IS 875(prt-3):2015. The cost includes labour, materials, transportations, T&P, etc. all complete as per direction of Engineer-in-Charge. The screen must have compressive strength>400kg/cm2 ,wet transverse strength > 7 N/mm, thermal conductivity1.63 W/m-K at 3% moisture content, water absorption<(><<)> 5% of dry weight. [NEW-NSWI] Ground Floor 279 First Floor 280 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 281 First Floor 282 Second Floor 283 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 284 First Floor 285 Second Floor 286 50010384 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC SILL BAND) Ground Floor 287 First Floor 288 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 289 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 290 First Floor 291 Second Floor 292 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 293 First Floor 294 Second Floor 295 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 296 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 297 First Floor 298 Second Floor 299 50010458 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement. (FOR RCC FINS) Ground Floor 300 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 301 First Floor 302 Second Floor 303 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 304 First Floor 305 Second Floor 306 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 307 First Floor 308 Second Floor 309 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 310 First Floor 311 Second Floor 312 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 313 First Floor 314 Second Floor 315 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 316 First Floor 317 Second Floor 318 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 319 First Floor 320 Second Floor 321 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 322 First Floor 323 Second Floor 324 50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor 325 First Floor 326 50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor 327 First Floor 328 50010704 Providing and Fixing of Single leaf solid WPC door shutter of 30 mm thick compacted with wood grain finished with 2 Nos SS Handles (150 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 4 Nos. SS Butt Hinges (125mm x 8.5mm x 5.5mm ) with all necessary fittings Complete with approved colour . [NSWI]Make:- WPC Door(Century/Green), Hard ware fittings (Godrej). Ground Floor 329 First Floor 330 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 331 First Floor 332 Second Floor 333 50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor 334 First Floor 335 50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor 336 First Floor 337 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 338 First Floor 339 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 340 First Floor 341 50011397 Providing and fixing of factory-made 2Track 2Panel uPVC Sliding window (White Colour) frame size 70X50mm and Sash size 45X60mm complete up to and including 1.5m high, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 5mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 5 mm clear Toughened glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep glass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 342 First Floor 343 50011406 Providing and fixing of factory-made 3Track 3Panel UPVC Sliding window (White Colour) frame size 128X50mm and Sash size 45X70mm complete up to and including 1.5m high, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber. The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 5mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 5 mm clear Toughened glass in the sash, UPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep glass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 344 First Floor 345 Second Floor 346 50011486 Supplying, Fitting & Fixing of Anti-Skid Vitrified Tile (PREMIUM QUALITY) on floors of size 600mm x 600mm x 9 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY TECHSTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 347 First Floor 348 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Second Floor 349 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 350 First Floor 351 50012200 System Aluminum Casement System Doors – Double Leaf Swing single glazed door Providing and fixing System Aluminum works for casement systems door having door frame 55mmx40mm, shutter 70mmx40mm, door bottom transom 150mmx40mm, central profile 47.3x42.9mm, grazing bead 31.8mmx17.85mm with glazing of single glass panel without middle transom made of non-euro groove architectural aluminium profile. The extruded aluminums sections should be T6 tempered made from Grade 6063 alloy, approved shade of pure-polyster/ hybrid surface coating Anodized (50-60-micron powder coat), silicon coated to suit marine atmosphere. All profiles should be None insulated Profiles. Corner connection will be Butt joint with Screw using Nano gaskets for sealing. All other major Accessories should also be made by the same manufacture. The drainage slots provided at the bottom part of the frame/sash on the outerside & weather strip siliconased brush gasket will be provided. 6mm Clear Toughend Glass (Saint-Gobain / AIS) infill fitted unto Sash/Frame using micro-wave treated siliconised EPDM gasket. The casement systems having hardwares SS handle (22mmx300mm), mortise lock with both side key cylinder, floor spring. Wall Thickness - Aluminium: 1.5mm. The system should qualify Airtightness ASTM E283: 10.7m3/h.m2 at 75Pa of pressure, Water tightness ASTM E300: 240 Pa, Wind load resistance ASTM E330: 2400 Pa. This cost includes labour, materials, wastage, transportation at site, fixing, fittings, etc. all complete. (Make :- FENESTA/ REKLAD) Ground Floor 352 50012828 Supply and fixing of MCM Modified Clay Material ‐ MCM A 300X600 mm of PHOMI make,as per company standard dimension, pattern, colour as specified, manufactured through unfired patented (Ref: US patent 8505840 B2 and European Patent 2157139) manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation ‐ Class A— ASTM E84‐ 15.The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in‐charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in‐charge. Make-Phomi Ground Floor 353 First Floor 354 50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Ground Floor 355 First Floor 356 50013261 Providing, Fixing & Fitting Ceramic glazed tiles (SUPER PREMIUM QUALITY) on wall of size 300mmx600mm of approved shade on 12mm thick cement mortar of mix (1:3) and grouted with epoxy grout including cost, conveyance, loading, unloading, stacking, royalties of all Materials, cost of all Labour, Sundries, T & P required for the work, etc. complete in all respect. (JOHNSON/SOMANY/KAJARIA) [NSWI] Ground Floor 357 First Floor 358 MIS-CVL-EV Chargin 359 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 360 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 361 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 362 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 363 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 364 50005597 Providing TEXTURED POLYCARBONATE sheet with all its accessories etc complete as per the direction & instruction of the E.I.C. [N.S.W.I] Ground Floor 365 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 366 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 367 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 368 50011496 Supplying, Fitting & Fixing of Industrial parking heavy duty Vitrified Tile (PREMIUM QUALITY) on floors of size 300mm x 300mm x 10 mm with self-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete. The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free. Make: (JOHNSON ENDURA/ SOMANY DURASTONE/ KAJARIA (STONE)) Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout) (NSWI SPECIAL) Ground Floor 369 MIS-CVL-Entry & Ex 370 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 371 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 372 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 373 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 374 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 375 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 376 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 377 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 378 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 379 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 380 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 381 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 382 MIS-CVL-Inspection 383 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 384 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 385 50000008 Providing and laying reinforced cement concret of M-20 grade with 20mm and down grade black hard grinite(crusher broken) stone chips including cost of all materials, labours T&P etc. Complete but excluding the cost of reinforcement. Ground Floor 386 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 387 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 388 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 389 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 390 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 391 MIS-CVL-Land Scapi 392 50002295 Planting of Nerium Olender 3 ht. ornamental plants, well established healthy disease free in poly bag/ big container Including transportation and delivery at sites. Ground Floor 393 50005655 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts Unit = Sqm (CPWD 2.12,P-217)[N.S.W.I] Ground Floor 394 50005657 Supplying and stacking of good earth at site including royalty and carriage upto 5 k m lead complete (earth measured in stacks will be reduced by 20% for payment) (CPWD 2.2,P-213)[N.S.W.I] Ground Floor 395 50005659 Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm (CPWD 2.4.3,P-214)[N.S.W.I] Ground Floor 396 50005661 Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).(CPWD 2.8,P-216)[N.S.W.I] Ground Floor 397 50005663 Providing & laying Selection no. 1 grass turf(Bermuda) with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer in charge (CPWD 2.34,P-235)[N.S.W.I] Ground Floor 398 50005667 Planting of Murraya exotica 20 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites. This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 8.46,p-372= Rs.15.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 154.49.[N.S.W.I] Ground Floor 399 50005669 Planting of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara, Mohan, Scarlet Queen, Variegated, Glabra Formosa, Peruviana Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) 45cm ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant9.40,p-381= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25 ,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49 Ground Floor 400 50005671 Planting of Malpighia coccigera 21/2 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 8.45,p-372= Rs.50.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 189.49[N.S.W.I] Ground Floor 401 50005673 Planting of Tecoma grandiflora 21/2 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 9.13,p-383= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49 Ground Floor 402 50005675 Planting of Allamanda cathartica 30 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 9.10,p-381= Rs.45.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x0.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 184.49[N.S.W.I] Ground Floor 403 50005677 Planting of Jasmine humile (Yellow) o 30 ht. ornamental plants,well established healthy disease free in poly bag / big container including transportation and delivery at sites. This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge .Plant 9.90,p-382= Rs.30.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54 ,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x0.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 169.49.[N.S.W.I] Ground Floor 404 50005681 Planting of Hena 20 ht. well grown healthy plant species as per specified height all saplings are healthy grown well canopy,disease free etc. including transportation and delivery at sites.This cost is including hoeing soil of size 2dia and 2 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge . Plant 8.50,p-373= Rs.40.00, hole 2.14.3,p-218= Rs. 30.02, Antitermite 2.54,p-246= Rs.46.34x.3= Rs.13.9, Cattle manure 0.1 cum 2.25,p-224= Rs.374.12x.1 =Rs.37.41, fencing .3 Sqm Rs.193.58x.3=58.16, Total Rs. 179.49(Say Rs.180.00)[N.S.W.I] Ground Floor 405 50005683 Planting of Fox tail palm 70 ht.ornamental decorative specimen plants well established healthy disease free in poly bag / big container including transportation and delivery at sites.Planting of each plant at specified location by application of fortilizer and pesticide as required as per instructio of Officer in-charge.This cost is including hoeing soil of size 3dia and 3 depth, mixing spreading soil and manure in 2:1 ratio, watering, maintenance for 30 days or more till the plant establish properly, as per direction of the officer in charge . a) plant 5.3,p-324=Rs.1183.00, stacking 7.44,p-349= Rs.650.00, digging hole 2.14.1,p-218= Rs 214.77, antitermite 2.54,p-246=Rs.92.68, shaping 2.38 ,p-236=Rs.53.60, cattle manure 2.25,p-224=Rs.374.12, fencing 2.23Sqm 2.58,p-248= Rs. 193.58x2.23= Rs 431.68 Total cost=2999.85(say Rs.3000.00) [N.S.W.I] Ground Floor 406 50006323 Filling & Leveling of site by JCB.[N.S.W.I] Ground Floor 407 50006324 Supplying planting of fruit plants including digging the pit & required quantity of fertilizer & pesticides such as mango water apple, jack fruit,guava, custand apple,count., lichu, jamun,star fruit ,tamarind,citrus lime,sapeta etc. Two to three year olds slpping at least two to six ft height depend on species as per direction of E.I.C.[N.S.W.I] Ground Floor 408 50006326 Maintenance Per Month including fertilizer pesticide, man power,grass cutting, straining, Seasonal flower all etc.[N.S.W.I] Ground Floor 409 MIS-CVL-Market Com 410 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 411 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 412 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 413 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 414 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 415 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 416 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 417 50000057 Drip course mould plaster 1:4 (1:cement :4sand) including necessary scaffolding curing etc. complete at all depth and height. Ground Floor 418 50000937 Supply, Fitting and Fixing of Rolling Shutter including cost of Material & Labour Ground Floor 419 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 420 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 421 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 422 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 423 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 424 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 425 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 426 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 427 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 428 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 429 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 430 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 431 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 432 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 433 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 434 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 435 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 436 50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Ground Floor 437 50010839 Supplying, fitting and fixing of 110mm dia PVC rain water down pipe (min. 6kg/sqcm) (IS-4985) with necessary fittings and all complete. PVC Pipe Brand:-SUPREME/ORIPLAST/FINOLEX. Ground Floor 438 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 439 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 440 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Ground Floor 441 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Third Floor 442 50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Third Floor 443 MIS-CVL-Pump room 444 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 445 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 446 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 447 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 448 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 449 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 450 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 451 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 452 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 453 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 454 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 455 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 456 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 457 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 458 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 459 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 460 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 461 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 462 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 463 50010827 Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia. of 2mm thick circular pipe with Balustrade of size 38mm x 38mm x 2mm @ 900mm C/C, stainless steel square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification and the entrance newel post will be 100mm dia. of 750mm height with top bulb, buffing, polishing etc. with cost, conveyance, labour, T and P etc. required to complete in all respect. [NSWI] Stainless steel Brand:- JINDAL/NIPPON STEEL. Ground Floor 464 50011560 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix, having continuous agitated mixer, mix design of specified grade for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismentalling then after casting at all depth and height, cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability.Without cost of reinforcement (FOR RCC WALLS). Ground Floor 465 MIS-CVL-RCC Drain 466 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 467 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 468 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 469 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 470 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 471 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 472 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 473 MIS-CVL-Security S 474 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 475 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 476 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 477 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 478 50000021 6mm thick cement plaster in cement mortar 1:4 (1 cement:4 sand) to R.C.C surfaces finished smooth including closed deep chipping and slurry treatment with necessary scaffolding, curing etc. all complete at all depth and height for inside and outside surfaces. Ground Floor 479 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 480 50000044 Providing anti-termite treatment including labour and materials etc complete.(As per specification confirming to IS Code 6313-3(2001)part-3 ). Ground Floor 481 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 482 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 483 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 484 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 485 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 486 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 487 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 488 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 489 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 490 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 491 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 492 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 493 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 494 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 495 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 496 50010644 Providing and painting two coats of Enamel paint over wood/Iron surfaces including cost of all materials,labour, cleaning, brushes, putty etc. Enamel paint :- Asian (AP Apcolite Gloss Enamel PO RED/Berger (Luxol HI Gloss Enamel PO RED)/Dulux(Gloss Premium Enamel). Ground Floor 497 50010656 Providing and Priming one coat of primer over new wood/Iron work including cost of all materials,labour,cleaning, brushes, putty etc. Wood/Iron Primer brand:- ASIAN PAINTS (Trucare wood primer pink)/BERGER (Parrot wood primer pink)/DULUX(Dulux wood pink) Ground Floor 498 50010668 Providing and Fixing of Factory made WPC Door Frame of size 125x65 provided with plug-in socket arrangement and joined together by screws. The finished door frame units to be of approved colour using high quality pigments complete in all respect as per specification. [NSWI] WPC Frame make:-Century/Green Ground Floor 499 50010680 Providing and fixing of ISI marked 30 mm thick Flush door Shutters (Single leaf) finished with 1mm thick lamination both side total thickness of 32mm flush door Shutter with 4 Nos SS butt Hinges (125 mm x 85 mm x 5.5 mm), 2 Nos SS Tower Bolt (250mm x 10mm), 1 No SS Aldrop (400mm X 300mm x 16mm dia rod), 1 No Floor type double door stopper, 2 Nos SS Handle of size 150mm, Teak wood Leaping around the edges, 1 No. Back Buffer with all materials,adhesives etc complete. (Excluding door closure, ornamental handle and Mortise Lock). [NSWI] Make:- BWP Flush door (Century Sainik 710 / Green marine gold 710), Laminate (Greenlam/ Centurylam,Marino),Hard ware fittings (Godrej). Ground Floor 500 50010716 Supplying, fitting and fixing of MS. grill,MS louvred ventiletors (make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER))including cost of labour ,material, transportation etc. as per the specification provided in Drawing. Ground Floor 501 50010815 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm of size hard granite chips with chicken welded mesh 25mmx25mm 11 gauge on new work including cost of labour, material, T and P etc. all complete. Ground Floor 502 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 503 50011029 Providing and painting the mural art painting work on wall/floor/ceiling by the selected artist/ agencies to make the art most visible of the stretch. The work includes scraping and cleaning of wall, painting one primer coat and one weather seal coat (Asian/ Berger/Dulux), applying paint for mural art painting. The paint must have a durability of at least 5 years. The cost of the work includes all the labour, man power, scaffolding, transportation, materials required, fooding, etc. for execution of the mural art to give the finish product. It must be noted that, the height shall be calculated from the point where the painting starts till the point it continues and ends. UPTO 3M HEIGHT Ground Floor 504 50011426 Providing and fixing of factory-made 3Track 3Panel UPVC Sliding window/Door (White Colour) frame size 128X50mm and Sash size 45X74mm completeabove 1.5m high, comprising UPVC multi-chambered frame having in-built UPVC roller track on top and UPVC sash with wall thickness of 2.0mm (+-0.2 mm) duly reinforced with G.I. section 1.5 mm – 2.5 mm (+-0.2 mm), profile shall be manufactured from Tropicalized Blend with TiO2 and required additives. Profile must be colorfast and conform to standard EN12608. The profile sections should have multi hollow (min 2 to 3 chambers) chamber to include GI reinforcement with 120 GSM zinc coated, fitted in continuous length, in closed chamber.The thickness of GI should be selected to meet the wind load requirement as per IS 875- Part III on sash/mullion. Supplier should be submitting wind load calculation & validation complying with IS-875-III before material supply. Minimum steel reinforcement thickness of 1.5mm to 2.5mm. UPVC Windows & Doors must be fabricated with fusion welded /Zip welded corners & must conform to the strength requirements based on wind load as per IS 875-Part III. All hardware fitted should be Non-SS, except handles to be of zinc/Al. alloy casted with powder coated. Glass should be minimum of 6mm clear Toughened Glass (SAINT GOBAIN/AIS) with weather seal (EPDM/TPE). After placing 6 mm clear Toughened glass in the sash, uPVC glazing bead, interlock, EPDM gasket, brush shall be provided including touch lock & Multi Lock and rollers & proper drainage system (holes about 8mm dia to be provided @ 300mm C/C outer side of lower sashes) shall be provided. Window frame will be fixed to the wall with 100mm long and minimum 8mm dia. fasteners and after fixing frame the gap between frame & wall should be filled with silicon sealant (not more than 5 mm x 5 mm) (UV treated silicon for outer frame sealing & Acrylic paintable silicon for inner frame sealing), complete in all respect. Standards & Tests: Follow the British Standard (BS EN 12608, UK, CEPT Ahmedabad, tested by Central Building Research Institute, Roorkee Shriram Institute of Industrial Research, New Delhi. All technical specification having wall thickness of min 2.0 mm(+-.02mm) with TPE gasket, wool pile with rollers, fasteners for fixing frame to finalised wall and necessary screws etc. and glass should be single glass with glazing bead of appropriate dimension. Reinforcement of galvanised mild steel with thick ness of 1.5 mm to 2.5 mm has to put throughout the Frame, glass shutter and mesh shutter. Glass support beading make of upvc sections will be fixed with TPE gasket to keep gl ass tight and unmoved. Multi point locking system (called Pop Up) made out of casted zamac with white powder coated and locking hook will make of SS304 grade material. Aluminum guide rail will be fixed on the Bottom part of frame on which the glass shutters will run. The roller will make of nylon and having capacity of 40-120 kg depend on glass weight. Fin seal will be provided to protect the dust in between closing point &interlocking point of glass & mesh shutters. Mesh panel (Fibre mesh & SS mesh) can also be provided depending upon the requirements of window and location wise. This cost includes fixing, wastage, transportation, labour, material, etc. complete. (NSWI SPECIAL) Make:(FENESTA/SAINT-GOBAIN) Ground Floor 505 50011926 Providing & applying water proofing treatment on SITC of Sunken floor treatment Stage1:Cleaning of concrete surface to remove dust,oil ,grease including removal of laitance and cleaning with compressed air.Repairing surface irregularities,damaged concrete,if any ,with Sika Latest modified repair mortar including a coat of bonding agent. Stage2:supply and application of 1:3 cement-sand mortar ,mixed with sika top 77-the polymer modified high quality emulsion,as a coving at the corners of floor and the vertical surface in the sunken area,and between floor and walls in the remaining area. Stage3:Supply and application of Sika Top Seal 107-the cementitious ,flexible waterproof coating onto the prepared surface in a continuous film on the floor of the sunken area,taking the coating over the vertical surfaces on the floor and over the coving on to the wall (before tilling) to at least 300mm above the final finished floor level.The coating shall also be continued on to the inner surfaces of the pipe penetration holes .Two coats shall be applied. Chemical Base Part A:liquid polymer and additive Part B:portland cement with selected aggregate and additive,Density fresh slurry density~2.00kg/I at +270C ,Layer Thicknes 1.5mm -2.00 average,water Vapour Resistance 3g/m2/day.Mechanical/Physical properties 3 days~2N/mm2,28 days~20N/mm2.Compressive Strength Above values at +270C,tensile Strength~4.56N/mm2 after 14 days exposure(According to ASTM D 2370),Bond Strength 2.0N/mm2 at +270C (failure in substrate),Elongation at Break With sika@ Fab-1,8-10% (Make:- MYK or Sika or BASF) Ground Floor 506 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 507 50013241 Supplying, Fitting & Fixing of full body Vitrified Tile (SUPER PREMIUM QUALITY) on floors of size 600mm x 600mm x 10 mm with s elf-embossed grooves, Bull nose finished, antiskid properly laid on 25 MM THICK cement mortar (1:1) and filling joints with epoxy grout of approved quality including cost of all materials, labour T & P etc required for the works all complete.The surface quality must have free from visible defects(IS-13630-1), class-1 stain resistance, no expansion on moisture, acid & alkali resistace, resistance to house hold chemicals, thermal shock resistance, less than 0.08% water resistance, frost free, coefficient of friction greater than 0.34. Make: (JOHNSON MARBONITE/ SOMANY DURASTONE/ KAJARIA E-SHIELD)Tile Epoxy Grout make: ASIAN PAINTS(code9660)/ BERGER(HS Tile grout)/DULUX (epoxy grout) [NSWI] Ground Floor 508 MIS-CVL-Septic tan 509 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 510 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 511 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 512 50000018 4 thick dry brick rammed khoa well watered and fully consolidated complete,including cost of all materials as per direction of Engineer-in-charge. Ground Floor 513 50000019 25mm. thick A.S. Flooring with cement concrete 1:2:4 including punning using 12mm. size hard granite chips including cost of all materials T & P etc complete. Ground Floor 514 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 515 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 516 50001719 12mm thick cement plaster 1:4 overbrick work with cement punning for skirting. including cost of labour, material, T&P etc. all complete. Ground Floor 517 50001839 Fly Ash brick masonary work in cement mortar 1:4 (1 cement : 4 sand) using fly ash bricks of 23cm X 11cm X 8cm having crushing strength not less than 35kg per sqcm with dimensional tolerance +/-2% including watering,curing and cost,conveyance,royality of all m aterials and cost of labour etc complete.As per the direction of the E.I.C. Ground Floor 518 50010360 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC ROOF SLAB) Ground Floor 519 50010420 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC CHHAJA and SHELVES) Ground Floor 520 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 521 MIS-CVL-Site Devel 522 50001792 Supplying, filling or Spreading of moorum by mechanical means including cost of all labour,material T & P etc. complete as per the direction of Engineer-in-charge. Ground Floor 523 MIS-CVL-Water Puri 524 50008261 Supplying and fixing Aquaguard Storage Cooler–Cum-Purifier (80 Ltr. Capacity ) with all cost complete.[N.S.W.I] Ground Floor 525 MIS-CVL-Workshop 526 50000001 Earthwork in stoney earth and gravel mixed stone and boulder not exceeding 0.014 cum in volume within 50 m. initial lead and 1.5 m. initial lift including rough dressing and breaking clods to maximum 5 cm. to 7 cm. and laying in layers not exceeding 0.3 m. depth. Ground Floor 527 50000003 Providing and laying plain cement concrete 1:4:8 (1 cement: 4 sand: 8 stone aggregate 40mm nominal size) as levelling course in foundation and plinth etc. including tempering, curing, shuttering etc. complete at all depth and height. Ground Floor 528 50000017 Supplying of filling sand in foundation and plinth including watering, ramming, consolidating and dressing, labours, tools all complete. Ground Floor 529 50000020 12mm thick cement plaster in cement mortar 1:6 (1cement:6sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 530 First Floor 531 50000022 16mm thick cement plaster in cement mortar 1:6 (1 cement:6 sand) including necessary scaffolding curing etc. all complete at all depth and height. Ground Floor 532 First Floor 533 50001303 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Foundation & Plinth Ground Floor 534 50001305 Fly Ash brick masonary in cement mortar 1:6:(1 cement:6 sand) using Fly Ash bricks of 23cm x 11cm x 8cm having crushing strength not less than 75kg./Cm2 per sqcm with dimentional tolerance +/- 2% including watering, curing and cost, conveyance, royalty of all materials & cost of labour etc complete. In Superstructure. Ground Floor 535 First Floor 536 50001692 Supplying, fitting,fixing and hoisting joists & M.S trusses and placing in position including cost of labour materials transportation etc.(make-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)) Ground Floor 537 50010372 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC COLUMNS) Ground Floor 538 First Floor 539 50010396 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR COLUMN FOOTING) Ground Floor 540 50010408 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR LINTEL BEAM) Ground Floor 541 First Floor 542 50010444 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR TIE BEAM) Ground Floor 543 50010446 Providing and laying in position R.C.C. M-20 grade concrete using 20 mm nominal size HBG down graded chips for reinforced cement concrete work using cement content as per approved design mix specified for reinforced cement concrete work, including the cost of Rigid and smooth centering and shuttering using ply, levelled works and dismantling the same after casting at all depth and height. (Excluding cost of reinforcement). (FOR RCC FLOOR BEAMS) Ground Floor 544 First Floor 545 50010470 Cutting, bending, binding and placing in position of reinforcement steel for R.C.C. work including the cost of 16 S.W.G. binding wire, steel, labour tools etc. Steel Brand:-SAIL/VIZAG/TATA TISCON/RINL/JINDAL STEEL(PANTHER)/Shyam Steel. Ground Floor 546 First Floor 547 50010572 Providing and Priming one coat of approved wall primer over interior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Interior cement based wall primer of premium quality.Interior Primer :- ASIAN PAINTS(Trucare interior-WT)/ BERGER (BP White Primer)/DULUX(Professional interior sealer-A500) Ground Floor 548 First Floor 549 50010584 Providing and Priming one coat of approved wall primer over exterior work to give an even shade including scaffolding and cleaning the surface before application etc. complete. Exterior cement based wall primer of premium quality Exterior Primer :- ASIAN PAINTS (Trucare exterior-WT)/ BERGER (Walmasta Primer)/DULUX (Professional exterior sealer-E900) Ground Floor 550 First Floor 551 50010596 Providing and Painting two coats of Anti-fungal weather coat, water proofing paint including scaffolding and cleaning the surface before application. [NSWI] Weather Coat :- ASIAN PAINTS (ULTIMA PROTEK) / BURGER (LONG LIFE-7 FLEXO) / and DULUX (PROFESSIONAL WEATHER SHIELD ELASTOMERIC). Ground Floor 552 First Floor 553 50010608 Providing and painting two coats of plastic emulsion paint of approved shade including scaffolding and cleaning the surface before application. [NSWI] Plastic Emulsion Paint :- ASIAN (Premium Emulsion)/BURGER (Easy Clean)/DULUX (Super Clean). Ground Floor 554 First Floor 555 50010620 Providing and Finishing wall surface with Acrylic Interior wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging charges with cost of all materials, labour T and P etc. complete. [NSWI] INTERIOR ACRYLIC WALL PUTTY:- (BIRLA WHITE/JK WALL PUTTY) Ground Floor 556 First Floor 557 50010813 Supplying, Fitting and Fixing Industrial Parking Vitrified Floor Tile of 10mm thick (SIZE 300X 300MM)on parking of approved shade laid on 25 mm thick cement mortar (1:1) and filling joints with epoxy grout (2mm) of approved quality including cost of all materials, labour T and P etc required for the works all complete. (For new work only) [NSWI]. Tile make:-NITCO/RAK/VARMORA , Epoxy Grout make:- ASIAN PAINTS(code9660)/ BERGER (HS Tile grout)/DULUX (epoxy grout). Ground Floor 558 50010975 Providing and finishing the wall surface with texture paint finish with approved materials of texture powder used @ 0.30Kg/Sqft of approved shade including scaffolding, cost of all materials and labour. [NSWI] Texture Paint brand:-ASIAN (Duracast Dholpurtex)/BURGER (Ruff-n-Tuff Decora Finish - Dholpur Cols)/DULUX (ultrafine honeycomb). Ground Floor 559 First Floor 560 50011936 Supplying and fixing of TATA Blue scope Steel Sheet Roofing of 0.52 mm thick as per attached Quoatation in roof drilling holes in wind ties including fixing of ridges valleys wind ties and cost of fittings.[NEW-NSWI] Ground Floor 561 50011984 Providing granite stone (plane leather finish) of 20mm thick above 0.4sqm on flooring of approved quality and size in staircase floors, kitchen platform including edge moulding and groove cutting etc in all floors at all height on 25mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the marble tile if required watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties, etc. all materials, cost of all labour, sundries, T&P required for the work including rubbing mechanically complete in all respect as per specification. Ground Floor 562 MIS-INE-ADMIN BUIL 563 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 564 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 565 40000952 Recessed wiring to Calling Bell Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular bell push ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-bell push switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 566 40000958 Recessed wiring to Television Point (Modular)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/TV socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK). Ground Floor 567 40000961 Recessed wiring to Telephone Point (socket)with 2 pair 0.5sqmm telephone cable with 20 mm dia non metalic PVC flexible conduit with socket ISI marked MS Box including all accessories and connection.( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-s witch-Telephone socket -Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK). Ground Floor 568 40000967 Recessed wiring to Ceiling Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 569 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 570 40000973 Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 571 40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 572 40000979 Recessed wiring to Security Light Point ( MODULAR) (4X24WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 573 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 574 40000985 Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 575 40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 576 40000991 Point wiring for Computer Point ( MODULAR) with 2.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with3 Nos of 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 577 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 578 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 579 40001006 Recessed wiring to submain in 2 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.4)(Make of PVC pipe-AKG/NORPACK) Ground Floor 580 40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor 581 40001015 Recessed wiring to submain in 4 x 10 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 4 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.11)(Make of PVC pipe-AKG/NORPACK) Ground Floor 582 40001039 Supply and laying of 50 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 583 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 584 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 585 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 586 40001141 Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 587 40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 588 40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 589 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 590 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 591 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 592 40001190 Supplying and fixing of Call Bell/buzzer ISI marked suitable for DC/AC single phase 230 volts complete as required (CSR sl no-1.30) Ground Floor 593 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 594 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 595 40001258 SUPPLY & FIXING OF POWER DISTRIBUTION BOX,MAKE-NET RACK/VAL RACK Ground Floor 596 40001703 Supply and fixing of 2 way single door MCB box with 1 no 32 AMP DPMCB with sheet steel encloser,distribution board,on surface /recess,complete with tinned copper bus bar,neutral bus bar,earth bar,din bar,detachable gland plate,interconnection,phosphate and power painted including earthing etc as required(Sl no-2.3.6,2.7)[Make-(a)MCB -Legrand/L &T/ABB/SCHNIDER Ground Floor 597 40001876 Supply and fixing of 16 Amp top(for inverter installation) with all accessories and conncetion(Make-Legrand/wipro/Anchor-Panasonic) Ground Floor 598 40001879 Recessed wiring in 1X1.5sqmm (For inverter)/DG wiring )FR PVC insulated single core multistrand copper conducter of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick as per direction of Engineer in charge(Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK) Ground Floor 599 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 600 40002179 Recessed wiring to Surface Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection .( Make of wire Finolex / L &T / Anchor / Havells/ V guard)Make-switch /-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor 601 40002886 Recessed wiring to bay light Point ( MODULAR) (45WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in charge . (Make of wire Finolex / L &T / Anchor / Havels/ V guard/HPL) Make-switch/etc-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor 602 40002987 Supply of 20 port Mobile Charging Station including all accessories and connections. Ground Floor 603 40007569 Supply and installation of Rubber Mats 12mm thick of size 2000mm x 1000mm x 12 mm thick Electrical tested with test certificate. Ground Floor 604 40007573 Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. Ground Floor 605 40007577 Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. Ground Floor 606 40007703 Supply and fixing of Main Panel board -I/C. 100 A 4P on load change over switch-1 no, 100 Amp four pole MCCB with stud connector (36 KA) -1 No, Bus bar - 4Nos 250 Amp,500 V copper strip , drum insulator for bus bar - 8 Nos & Bus bar sleeving -1 Job , O/G-63 Amp 4P MCB with Stud connector -2 Nos ,40 Amp FPMCB stut connector-2 Nos,63 A DPMCB with Stut connector-2 nos,32 A DPMCB with Stut connector-4 Nos with sheet metal powder coating and door gasket ,door hinges,door locks ,wiring and socketing [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)-Voltmeter,Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor 607 40008024 Providing and fixing Carbon-di-oxide fire extinguishers. Capacity 4.5 kg. ISI Marked.(Make -Fire shield/Kanex/Safex ) Ground Floor 608 40008035 Sand Bucket as per IS specification . Ground Floor 609 40008037 Bucket stand to store 3nos of Bucket also having aluminium sheet above the atand to prevent the sand from rain/Sunset. Ground Floor 610 40008126 Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR) Ground Floor 611 40008132 Supply & fixing of 600MM (24) WALL MOUNTED AIR CIRCULATOR FAN WITH COMPLETE ACCESSORIES[BROWN/WHITE].including hanging and connections as per instruction of Electrical Engineer-in-charge[MAKE- USHA MODEL-DOMINAIRE WALL/CROMPTON MODEL-ACVOTEX24 WM/HAVELLS/V-GURAD /ANCHOR-PANASONIC) Ground Floor 612 40008142 Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER) Ground Floor 613 40008150 Supply and fixing of 6 way mcb Box ( 8+18)(PDB) with I/C- 63 AMP 4PMCB + 63 AMP 4P RCCB (300MA) & O/G- 20 AMP SP MCB -09 NOS&16 AMP SP MCB -09NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.[Make-(a) MCB/MCCB-Legrand/L&T/ABB/SCHNIDER Ground Floor 614 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 615 40008385 Supply and fixing of on 15 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON(MODEL NO-LSCRM-15W-CDL/LSCSM-15W-CDL)/ PHILIPS(MODEL NO-15W DURASLIM ROUND/SQUARE 165MM/WIPRO(MODEL NO-LD80-131-XXX-60-XX) Ground Floor 616 40008387 Supply and fixing of on 24 watt round/square shape slim recessed mounted led panel with dia cast housing finished in white powder coating False ceiling with comprises of aluminium die cast housing finished in white powder coated & ABS white ring . The downlighter is pre-wired with high efficiency electronic driver. High traslucent frosted diffuser is used to get glare free, smooth light distribution. Operating Voltage Range : 150V~ - 270V, PF : > 0.9, 100 Lum/Watt with lamp , choke, connecting wire, and all accessories and connections .( Make- CROMPTON/ PHILIPS(MODEL NO-22W DURASLIM ROUND/SQUARE 208 MM/WIPRO(MODEL NO-LD80-281-XXX-60-G1) Ground Floor 617 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 618 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 619 40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor 620 40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor 621 40008495 Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL) Ground Floor 622 40008505 Supply & fixing of cat-6 UTP cable,4 pair,23AWG,FRPVC CM for LAN wiring with conduit pipe / PVC casing caping / under floor G.I. Tunk line. MAKE- D-LINK(MODEL NO-NCB-C6UGRYR)/DIGISOL/MOLEX) Ground Floor 623 40008507 Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszg ,1mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-1-LS)/DIGISOL/MOLEX) Ground Floor 624 40008509 Supply & fixing of patch cord,cat-6,utp,24awg,grey,lszh ,2mtr(Make-D-LINK(MODEL NO-NCB-C6UGRYR1-3-LS)/DIGISOL/MOLEX) Ground Floor 625 40008511 Supply & fixing of information outlet with faceplate,single port ,modular straight shu and keystone,cat-6 utp,white,toolless type(MAKE-D-LINK/MOLEX/DIGISOL) Ground Floor 626 40008513 Supplying & fixing of patch panel ,24 PORT,CAT-6 UTP 180 Degree including all accessories and connections(Make-D-Link(Model N o-NPP-C61BLK241)/MOLEX/DIGISOL) Ground Floor 627 40008585 Supply and fixing of surface mounted led 18 w square/round light with powder coated finished in white housing 1with lamp , choke, connecting wire, and all accessories and connections .(Make- CROMPTON(MODEL NO-LCDSPLN-R-18-CDL/LCDSPLN-S-R-18-CDL)/WIPRO(MODEL N O-LD80-171-XXX-60-SM/PHILIPS(MODEL NO-20W Rd Metal FullGlow LED Surface ) Ground Floor 628 40008586 Supply and fixing of 24 Port Gigabit Smart Managed Switch with 4 Gigabit SFP Ports including all accessories and connection(Make-D-LINK(MODEL NO-DGS-1210-28)/DIGISOL (MODEL NO-DG-GS1528)/MOLEX) Ground Floor 629 40008703 Supply and fixing of 60wt Ceiling mounted high bay LED luminarie with LED lamp including all accessories and connection.(Make- Crompton model-TIP-311-70-57-SL-CP-NSG /wipro/philips) Ground Floor 630 40009312 Supply and installation of 1.5Tr.(5 Star) Inverter Split type Air Conditioner with supply and fixing of 4 KVA ,130-280 Volt voltage range wall/floor mounted stabiliser including all accessories,fastner angle copper piping up to 10ft & connections MAKE of A.C. – CARRIER MODEL NO-EMPERIA DXI/BLUE STAR MODEL NO-IA518ENU,MAKE OF STABILIZER- AUTOTEK/V-GUARD/MICROTEK Ground Floor 631 40009316 Supply and installation of 2.0Tr.(5 Star) Inverter Split type Air Conditioner with supply and fixing of 5 KVA ,130-280 Volt voltage range wall/floor mounted stabiliser including all accessories,fastner angle copper piping up to 10ft & connections MAKE of A.C. – CARRIER MODEL NO-EMPERIA DXI/BLUE STAR MODEL NO-IA/IC524DNU,MAKE OF STABILIZER- AUTOTEK/V-GUARD/MICROTEK Ground Floor 632 40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor 633 MIS-INE-AREA ILLUM 634 40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor 635 40001033 Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor 636 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 637 40001367 Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 638 40002155 Supply and fixing of 16 sq.mm 04 core PVC Al. Arm Cableof 1.1 KV grade end termination.(Brass compression) Ground Floor 639 40002239 Supply and laying of 2.5Sqmm 3 Core Cupper Cable 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick (Make of wire Finolex/L &T/Anchor/Havels/V Guard) Ground Floor 640 40002349 Supply & errection of 8.0 Mtr galvanized Octagonal pole ,continuosly tapered,single piece,3mm thick,The face to face dimension is 130mm at bottom and 70mm at top dia.base plate.size is 200 x 200 x16 mm thick The pole should be manufactured from special steel plate suitable for lighting Arrangement System ,Galvanized Founation bolt specification of bolt length 600mm circle dia 200mm bolt size 20mm,Template size is 200mm PCD,thickness 3mm with 10/4 Bakelite Cover,63 Amp 4 way Stud Connector-01No,10 Amp SPMCB-01 No,MCB Channel-01 No,Mudguard Nut,Bolt & washer-06 Nos,Aluminium Socket-08 Nos.(make-Bajaj/havells/RR-ISPAT) Ground Floor 641 40002353 Supply and fixing of 1mtr. Long Galvanized deocartive single arm welded with top canopy at an angle of 120 degree with the pole.The outer dia of arms are 46mm,4 nutbolts suitable for 70mm Top. Ground Floor 642 40002355 Supply and fixing of 1mtr. Long Galvanized deocartive double arm welded with top canopy at an angle of 120 degree with the pole.The outer dia of arms are 46mm,4 nutbolts suitable for 70mm Top. Ground Floor 643 40002360 Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thickness Ground Floor 644 40002497 Supply of outdoor type auxillary panel board made out from 20guage thick CR Sheet duly painted with clamping arrangement to be fixed on street light pole equipped with 04 nos bus bar 03 nos indication lamp with 1 No toggle switch ,1 no timer switch , 1 No Stud type 4 way terminal I/P) 63 Amp ) 1 No 63A TPN MCB, 1 No 3 Pole Contractor 65 A, 1 No Single Pole MCB 10A, 3 Nos 16 amp TPN MCB , 3 Nos Stud type , 4 way terminal (O/P) 63A A with earthing arrangement [Make-(a)MCB /MCCB - Legrand/ Schnider/L &T/ ABB, ( b)Volt meter, Ammeter-AE/CAPPA, (d) all other acessories ISI mark] Ground Floor 645 40003041 Supply, installation, testing and commissioning of GI coil earthing including excavation of earth pit in all kinds of soil/rock filling with charcoal & salt, connections to earthing stids/ bolt of the pole complete including all accesories and connections. Ground Floor 646 40005870 Supply and laying of 25 sq.mm 3.5 core End termination for Cableof 1.1 KV grade ISI Marked Ground Floor 647 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 648 40008383 Supplying & installation, testing and commissioning of post top lantern of 40 watt LED luminare with all accessories and including connection etc. ( Gate light )(Make-CROMPTON(MODEL NO-LPTO-40-CDL-M (40 WATT)/PHILIPS/WIPRO MODEL NO-LP07-501-XXX-57-CL) Ground Floor 649 40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor 650 40009686 Supply & Fixing of 2 core 6 sqmm Cable end termination Ground Floor 651 40010339 Supply, delivery, errection, testing & commissioning of 20 Meter , 20 sided polygonal hot dip galvanized high mast suitable for wind velocity of 250 KM/HR wind speed or more. The high mast must be supplied in two sections .The top dia and bottom dia of high mast should be 150 mm and 610 mm respectively . The thickness of top and bottom section should be 5 mm and 6 mm respectively . It shall include all accessories like head frame, Two points suspension system with steel wire rope of 6 mm dia, double drum winch ,galvanized lantern carriage with 8 nos. 300 wt LED flood light fitting having die cast aluminium controlgear box complete with ignitor & capacitor. The high mast to be supplied along with LED aviation obstruction light complete with all accessories, lightening final, integral power tool ,1.5 HP motor, EPR trailing cable installed inside the base compartment. 12 nos. 1200mm length foundation bolts for foundation. .outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP conta ctor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and out going 16 & 2.5 sq. mm terminals. The scope of work also includes to construct RCC foundation , Erection of high mast, installation of feeder pillar, 2 nos. earthing with 2.5 mtr long 40 mm dia GI earth electrode. . The high mast to be supplied along with double drum winch . Wind tunnel report of high mast shaft should confirm the force coefficient and the mast must be suitable for 250 Km/HR wind speed or more. The entire high mast lighting system should be warrantied for a period of 2 years from the date of handing over . (Make- of Luminaries- Crompton Greaves/ Philips / Wipro )(Make of mast-RR ispat/Bajaj Ground Floor 652 MIS-INE-CCTV 653 40002360 Supply and fixing of 40mm dia HDPE pipe -PE 80 grade PN-6. 2.0 wall thickness Ground Floor 654 40003368 Supply,Installation,Testing and Commissioning of RJ 45/DC Connector as per theTechnical specification and direction of EIC. Ground Floor 655 40008495 Supply of 6U wall mounted rack including all accessories and connection(make-D-link(Model no-NWR-6U-5545-GR)/MOLEX/DIGISOL) Ground Floor 656 40008498 SUPPLY OF 9U WALL MOUNTED RACK INCLUDING ALL ACCESSORIES AND CONNECTION(MAKE-D-LINK(MODEL NO-NWR-9U-5545-GR)/MOLEX/DIGISOL) Ground Floor 657 40010307 Supply , Installation, testing , commissioning of 4MP IR Network Bullet Camera: (1/3 4MP PS CMOS Image Sensor,Max. 4MP (2560 × 1440) @25/30 30fps,IR Range of 30 Mtrs, Instastream, H.265 and Smart H.264+ dual-stream encoding,DWDR, Day/Night (ICR), 3D-DNR, IP67, PoE Support) Make - CP Plus/ Prama Ground Floor 658 40010309 Supply , Installation, testing , commissioning of 4MP IR Network Dome Camera: (1/3 4MP PS CMOS Image Sensor,Max. 4MP (2560 × 1440) @25/30 30fps,IR Range of 30 Mtrs, Instastream, H.265 and Smart H.264+ dual-stream encoding,DWDR, Day/Night (ICR), 3D-DNR, IP67, PoE Support) Make - CP Plus/ Prama Ground Floor 659 40010313 4MP WDR 32x IR Network PTZ Camera: 1/2.8 2MP CMOS Image sensor (0.9071 centimeters), Max. 50/60fps@4MP, Powerful 32x Optical zoom and 16x Digital zoom, WDR(120dB), 2D/3D-DNR, Day/Night (ICR), EIS, Electronic Defog, ROI, AGC,AWB, BLC, HLC, IR Range of 150 Mtr., Max 300° /s pan speed, 360° endless pan rotation, Support Face Detection, Make - CP Plus/ Prama Ground Floor 660 40010317 Supply , Installation, testing , commissioning of 24 Port Gigabit Ethernet PoE Smart Switch SFP port (192wt)2 . Make-Netgear/Junip er/Aruba Ground Floor 661 40010327 Supply , laying of Cat 6 Cable into PVC Pipe with casing Capping accessories CAT6 UTP Cable with LSZH Roll (305 Mtr) Make- D-link/Digisol Ground Floor 662 40010331 Supply , Installation of PVC IP55 Junction Box Ground Floor 663 40010401 Supply , Installation, testing , commissioning of 32Ch. 4K Network Video Recorder(Instastream/H.265/Smart H.264+/H.264/MJPEG codec decoding, Support 4 SATA HDDs up to 10TB Each,Support Multi-brand network cameras) Make - CP Plus/ Prama Ground Floor 664 40010403 Supply , Installation, testing , commissioning of 8 Port Giga Eth Unmanaged PoE Switch with 6KV surge protection , 150 Watt . Make- Netgear/Juniper/Aruba Ground Floor 665 40010405 Supply , Installation, testing , commissioning of 4-Port Gigabit Ethernet PoE Unmanaged Switch . Make-Netgear/Juniper/Aruba Ground Floor 666 40010407 Supply , Installation, Testing of 8 TB Surveillance HDD, Make- SEGATE/WD Ground Floor 667 40010408 Supply , Installation, Testing of HD Display LED 43 Inches or Higher Make - Samsung /LG Ground Floor 668 40010410 Supply , laying of Solid Cat 6 Outdoor Armed (ECCS Tape) Cable Make- D-link/Digisol Ground Floor 669 40010412 Supply , Installation, testing , commissioning of 1KVA Online UPS with Battery with 30 Mins Backup Make-Numeric/APC/Microtek Ground Floor 670 MIS-INE-DG SET 671 40001036 Supply and laying of 35 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 672 40010576 Design, supply, erection, testing and commissioning of 25 KVA silent type DG set(Only for light, fan , computer & 1 no Acquaguard point) with AMF, 440 V three phase 1500 RPM ,50HZ ,3 Cylinder with 4 nos earthing, 63 AMP 4 POLE CHANGE OVER ,ms pipe exhaust system, residual silencer, thermal logging and cladding of exhaust pipe complete , D.G. Plinth & Shed as per specification as required and as per direction of engineer-in-charge. Make- Mahindra Powerol Ltd/Cumins . Ground Floor 673 MIS-INE-Driver Res 674 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 675 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 676 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 677 40000973 Recessed wiring to Exhaust fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 678 40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 679 40000979 Recessed wiring to Security Light Point ( MODULAR) (4X24WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 15 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 680 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 681 40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 682 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 683 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 684 40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor 685 40001042 Supply and laying of 70 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 686 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 687 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 688 40001132 Supplying and fixing of 8X6 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam) Ground Floor 689 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 690 40001141 Supplying and fixing of two modular GI Box 18 swg with Modular base & cover for 2 module (Sl. No- 1301,1421)(Make-switch/Socke t-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 691 40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 692 40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 693 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 694 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 695 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 696 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 697 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 698 40001876 Supply and fixing of 16 Amp top(for inverter installation) with all accessories and conncetion(Make-Legrand/wipro/Anchor-Panasonic) Ground Floor 699 40001879 Recessed wiring in 1X1.5sqmm (For inverter)/DG wiring )FR PVC insulated single core multistrand copper conducter of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick as per direction of Engineer in charge(Make of wire Finolex/Anchor/Havells/V guard)(Make of PVC pipe-AKG/NORPACK) Ground Floor 700 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 701 40008126 Supply and fixing of 250 mm sweep air ventilating fan with Louvers (PVC BODY) fan with connecting wire and all accessories including fixing and connections . [MAKE- USHA MODEL-CRISP AIR VX/CROMPTON MODEL-VENTILUS/HAVELLS/ANCHOR) Ground Floor 702 40008142 Supply and fixing of 6 way mcb Box ( 8+18)(BDB) with I/C- 32 AMP 4PMCB & O/G-25AMP DP RCCB (100MA)-3 NOS&10 AMP SP MCB -12NOS with sheet steel encloser ,distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection ,phosphate and power painted including earthing etc as required.Make-MCB-(Legrand/L &T/ABB/SCHNIDER) Ground Floor 703 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 704 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 705 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 706 40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor 707 40008405 Supply & fixing of 90 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 having LM 79 LM 80 tested including bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire with all accessories . (Make- CROMPTON(MODEL NO-TRP-412-90-57-SL-LM-NSG)/PHILIPS(MODEL NO-BRP033 LED90S 90W 9000LM)/WIPRO(MODEL NO-LR08-102-XXX-57-XX ) Ground Floor 708 40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor 709 40010399 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top & bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a) MCB/MCCB- Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming- 1 No 200 Amp FP MCCB [35 kA] Busbar : 4 Nos 400A, 500V Electrolytic copper strips Outgoing - 2 nos 125Amp 4PMCCB with stud connector (36 KA) ,3 nos 63 A FPMCB with Stud connector,2 nos 40 A FPMCB with Stud connector,3 nos 63 A DPMCB with Stut connector Instrument - 03 Nos. Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 03 Nos : LED type phase indicating lamps with control fuses,Door gaskets ,Door Hinges,Door locks,Wiring with socketing Ground Floor 710 MIS-INE-EV CHARGER 711 40001039 Supply and laying of 50 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 712 40001045 Supply and laying of 95 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. (Sl. No -25 sl no- 5.1.2)(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 713 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 714 40001367 Supply and laying of 16 sq.mm 4 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required.(MAKE CABLE - FINOLEX/ HAVELLS/ POLYCAB/ KEI) Ground Floor 715 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 716 40002152 Supply and fixing of 95 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade end termination Ground Floor 717 40002519 Supply & Fixing of 4 core 16 sqmm Cable end termination(Brass comression) Ground Floor 718 40002745 Supply and laying of 50 sq.mm 3.5 core End termination for Cableof 1.1 KV grade ISI Marked(Brass compression) Ground Floor 719 40003522 Supply and installation of HDPE pipe inspection chambers with die cast lid Ground Floor 720 40006311 Main Distribution Board-Incoming power Distribution Panel/board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes,gasket,powder coated,top & bottom terminals and properly painted with anticorrosive primer and paints,comprising the following [Make-(a)MCB/MCB Box-LEGRAND/ L&T/ ABB/ SCHNIDER (b) meter,Ammeter-AE/CAPPA(c)all other acessories ISI mark] Main incoming- 125 amp. TPNMCCB [25 ka] - 01 set 125 amp. 415 volt cut out - 03 nos. without meter space out going- 63 amp. TPNMCB [10 ka] - 03 nos 125 amp , 25 / 3 mm. copper bus bar - 04 nos indicating lamp and controlling switch - 03 set for 63 amp. tpnmcb instruments 0 – 100 amp. ammeter with selector switch - 01 set 100 / 5 amp. ct - 01 set 0 – 500 volt. voltmeter with selector switch - 01 set indicating lamp with controlling switch - 01 set size – 900 x 900 x 200 mm Ground Floor 721 40006385 Main Distribution Board -Incoming power Distribution panel/ board suitable for flush mounted type made of 14 SWG sheet with MS angles channels suitable sizes, gasket, powder coated, top & bottom terminals and properly painted with anticorrosive primer and paints, comprising the following: [Make-(a) MCB/MCCB- Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC(b)-Voltmeter, Ammeter-AE/CAPPA (d) all other acessories ISI mark] Incoming- 1 No 200 Amp FP MCCB [35 kA] Busbar : 4 Nos 400A, 500V Electrolytic copper strips Outgoing - 3 nos 125Amp 4PMCCB Busbar : 4 Nos 200A, 500V Electrolytic copper strips 125 Amp FP Change Over ,Bus bar-200A Cupper Busbar ,Instrument-Multifunction meter,Indicator-1 set 3 Nos 63Amp 4PMCCB Instrument - 03 Nos. Multi-function meters showing voltage, current, pf, frequency, MD and THD with required 500/5A CTs 03 Nos : LED type phase indicating lamps with control fuses Ground Floor 722 40007703 Supply and fixing of Main Panel board -I/C. 100 A 4P on load change over switch-1 no, 100 Amp four pole MCCB with stud connector (36 KA) -1 No, Bus bar - 4Nos 250 Amp,500 V copper strip , drum insulator for bus bar - 8 Nos & Bus bar sleeving -1 Job , O/G-63 Amp 4P MCB with Stud connector -2 Nos ,40 Amp FPMCB stut connector-2 Nos,63 A DPMCB with Stut connector-2 nos,32 A DPMCB with Stut connector-4 Nos with sheet metal powder coating and door gasket ,door hinges,door locks ,wiring and socketing [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)-Voltmeter,Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor 723 40010369 Supply & laying of 75mm Dia HDPE pipe PN - 6 PN - 80 required for cable laying. Make - Magunm, Supreme, Sudhakar. Ground Floor 724 40010415 Design,Supply ,erection,testing and commissioning of 10 KW- 3 x 3.3 KW AC E-Rickshaw charger having following specification Input Voltage 415 VAC, 3 ph 5wire(L1, L2, L3, N & PE) Input Frequency 50 Hz Number of Outputs- 3 Output 1 Rating- Each outlet 230VAC, Max 15A (MAKE- Anchor Panasonic/Siemens) Ground Floor 725 MIS-INE-FAST AID K 726 40007577 Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room. Ground Floor 727 MIS-INE-FIRE FIGHT 728 40008024 Providing and fixing Carbon-di-oxide fire extinguishers. Capacity 4.5 kg. ISI Marked.(Make -Fire shield/Kanex/Safex ) Ground Floor 729 40008026 Providing and fixing stored pressure portable (powder type) ABC - 6.0 kg fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug(Make -Fire shield/Kanex/Safex .) Ground Floor 730 40008033 Providing and fixing of 4kg clean agent type fire extinguishers including all accessories as per latest IS with wall bracket and rawl plug (Make -Fire shield/Kanex/Safex .) Ground Floor 731 40008073 Supply and fixing of wall mounting type Auto glow signages of different type like, fire exit with one side arrow /do not use lift in case of fire/Emergency Exit/Staircase Indicating Arrow etc . Sizes :-300x150mm . type .(Make-Prolite autoglow) Ground Floor 732 40008075 Supply and fixing of Location & Map Auto glow Signages . Sizes900x1200mm . Ground Floor 733 MIS-INE-LIGHTING P 734 40002086 Air-Terminal Supply, Installation, Testing & Commissioning of Early Streamer Emission (ESE-30))type Lightning Air Terminal. Supporting Mast The mounting pole used to support the lightning air terminal shall be minimum length of 05 Mtr. , non corrosive and made up of medium class GI / SS pipe of 1.5″ diameter having base plate at bottom for securely fixing the mast on roof top. The mounting pole and supports shall be securely fixed with the brackets and PVC insulated metallic guy wires to withstand the maximum wind velocity of that area. Protection Radius :- 48 Mtr Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 735 40002089 Lightning Strike Counter Supply, Installation, Testing & Commissioning of non-electronic & non-resettable (Not require any external power supply) type lightning strike counter to count the lightning stroke having display with IP-67 enclosure including all accessories and connection..(6/7 digit) Make :- ABB / STROMKING All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Engineer-in-Charge. Ground Floor 736 40002095 Supply, Installation, Testing & Commissioning of maintenance free chemical earthing having enhancing chemical compound with 3 Mtr. Long copper bonded steel rod and suitable termination clamp including all accessories. Make :- ABB / STAR-X / UNIVERSAL All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 737 40002098 Supply, connection &Testing of sub earthing with 16 Sq.mm single core multi stranded copper flexible wire from surge protection device (SPD) panel to earth electrode & Main panel board to SPD panel including all accessories, cable socketing and connections. Make :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge Ground Floor 738 40002101 Supply, Installation, Testing & Commissioning of indoor type wall mounted Surge protection device (SPD) panel made of 2 mm thick CRCA sheet, dust and vermin proof duly powder coated having the following arrangement & complete factory wired by 16 Sq.mm single core multi stranded copper flexible wire. [A] Type 1+2 AC Surge Protection Device (SPD) (TP+N) (50 KA) - 01 Set [B] 63 Amp. HRC fuse with link – 03 Nos [C] 100 Amp. 4 pole stud connector – 01 No Make of SPD & HRC Fuse :- HAVELLS / L&T / LEGRAND Make of Wire :- FINOLEX / ANCHOR / HAVELLS All the work should be carried out as per the specified specifications and instruction of the Engineer-in-Charge. Ground Floor 739 40002720 Supply and laying of 70sqmm single core FR PVC insulated unseathed copper conductor for voltage grade 1100 volt as per IS-694 in sur face/underground as required(sl no-5.5.2)(Make-KEI/FINOLEX/HAVELLS) Ground Floor 740 MIS-INE-ONGRID SOL 741 40003442 Supply,Installation,Testing & Commissioing of Net Meter in Consultation with Distribution utility. Ground Floor 742 40011901 Design,Supply,Installation,Testing & Commissioing of Grid Connected Roof top solar PV System(Through net metering)(Make-Solar PV Panel(VIKRAM/WARREE/TATA POWER SOLAR SYSTEM/PANASONIC SOLAR) ,Solar-P.C.U-LUMINOUS/STATCON/MICROTEK/SU-KAM POWER SYSTEM,Solar Battery-EXIDE/OKAYA/LUMNOUS,DC and AC distribution-MCB-Legrand/L &T,HRC fuse-L&T/ABB,Copper cable-Finolex/Havells/Polycab) Ground Floor 743 MIS-INE-PA SYSTEM 744 40001708 Wiring to Loudspeaker with 2x1.5 sqmm stranded copper conductor unarmoured cable for loud speakers clamped with PVC pipe saddles,base etc.on ceiling/wall complete including termination,testing etc as required (Make-Finolex/Anchor/Havells/V-guard) Ground Floor 745 40001709 Installation,testing,commissioning charges of audio system. Ground Floor 746 40004559 Supplying and fixing of 25 mm dia conduit of PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.( Sudhakar / AKG / BEC/ANCHOR) Ground Floor 747 40008481 Supply of wall mounted speaker make- Ahuja (ASX-312bt) including all accessories. Ground Floor 748 40008483 Supply of wireless speaker Microphone Make-Ahuja(AWM 700UH)including all accessories Ground Floor 749 40008487 Supply of Audio amplifier Make-Ahuja(SSA-250DP) including all accessories Ground Floor 750 40010436 Supply of 30 Watts Outdoor Horn Speaker ( Make- Ahuja/ Sonodyne) Ground Floor 751 40010439 Supply of ahuja Two Way Counter Communication System (Make-ahuja (CCS-2300 ) Ground Floor 752 MIS-INE-SECURITY R 753 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 754 40000976 Recessed wiring to Security Light Point ( MODULAR)(1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/HPL/KEI) Make-switch-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 755 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 756 40000985 Point wiring for 5/ 6 amp socket outlet ( Separate) ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 757 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 758 40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor 759 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 760 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 761 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 762 40001237 Supply and fixing of 4 way , single Door MCB Box with 1 No 32 Amp. DP MCB & 2 Nos of 20 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.,2.7, )Make-MCB-(Legrand/L &T/ABB/SCHNIDER/ANCHOR-PANASONIC) Ground Floor 763 40008124 Supply & fixing of 400mm (16) wall mounted fan with complete accessories[brown/white].including hanging and connections [MAKE- USHA MODEL-MIST AIR DUOS/ CROMPTON MODEL-TROPEDO HI SPEED//HAVELLS/V-GURAD MODEL-PETAL WF 17/ANCHOR) Ground Floor 764 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 765 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 766 40008399 Supply & fixing of 25 Wt. LED Street light fitting comprises of Pressure die cast Aluminium housing powder coated in silver grey and toughened glass, Surge Arrester 1 No & 100lum/wt, Protection IP66 with bulb,choke,cover,G.I bracket,clamp & nut bolt connecting wire all accessories (Make- CROMPTON(MODEL NO-TRP-415-25-57-SL-LM-NBK)/ PHILIPS(MODEL NO-BRP029 LED25S 25W 2500LM)/ WIPRO) Ground Floor 767 MIS-INE-SHOP 768 40000946 Recessed wiring to Angle Holder Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havells/V guard/KEI) Make-switch /Angle holder-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 769 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 770 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 771 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 772 40000988 Point wiring for 15/16 amp socket outlet ( MODULAR) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 15/16 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 773 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 774 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 775 40001024 Supply and laying of 6 sq.mm 2 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/ Polycab/KEI) Ground Floor 776 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 777 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 778 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 779 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 780 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 781 40001187 Supply and fixing of 8 way , Double Door MCB Box with 1 No 32 Amp. DP MCB & 6 Nos of 20 Amp. SPMCB with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.6,2.7, )Make-MCB-(Legrand/L&T/ABB/SCHNIDER) Ground Floor 782 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 783 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 784 40002179 Recessed wiring to Surface Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection .( Make of wire Finolex / L &T / Anchor / Havells/ V guard)Make-switch /-Legrand /Wipro /Anchor /havells /Panasonic) Ground Floor 785 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 786 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 787 40008393 Supply and fixing of 9 WT. LED Bulb installred at angle holder/ batten holder.(Make- CROMPTON/ PHILIPS(MODEL NO-AceSaver 9W)/WIPRO(MODEL NO-N09001) Ground Floor 788 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 789 40008585 Supply and fixing of surface mounted led 18 w square/round light with powder coated finished in white housing 1with lamp , choke, connecting wire, and all accessories and connections .(Make- CROMPTON(MODEL NO-LCDSPLN-R-18-CDL/LCDSPLN-S-R-18-CDL)/WIPRO(MODEL N O-LD80-171-XXX-60-SM/PHILIPS(MODEL NO-20W Rd Metal FullGlow LED Surface ) Ground Floor 790 MIS-INE-VIDEO WALL 791 40010417 LED Display Board 126 LX63 H/10LX63H/80LX63HP outdoor 6 pixel density 160000 dots/sqm module resolution128x64 dots frame frequency 60Hz single LED unit pixel ,brightness 800-1000cd/sqm,gray scale up to 16bit /2.81 billion,optimum viewing angle 140x120,input voltage 220V AC ,operating tempreature 200C to 500C,Cabinet size 960mmx960mm die cast,english/odia/any language for text,video,image,outdoor active LED video fixed on unipole structure with ACB box with supply and installation.Thickness of the screen>120mm wall(BIS certified module)LED:NATION STAR SMP. Ground Floor 792 40010419 Novastar TB 40 processor with 4G module(BIS certified module),Novastar IND 528 receiving card,cloud based software inbuilt,LAN/Cloud data entry system having multiscreen playback synchronization mechanism (Make-Novastar TB 40) Ground Floor 793 40010423 Fixing of frame unipole structure 106x63 with ACP box for supporting LED sign board 40x40x3 mmsq SS 304 grade pipe and top plate for pole 580x500x12 mm with base plate 450x450x20mm and single pole size 275mm diax5x3000mm working platfrom made by 25x25x3 mm SS-304 grade square pipe panel size 768x768mm of ACP work(Make-Ahuja 100 watt speaker SS-304 JINDAL/NIPPON STEEL of premium quality. Ground Floor 794 40010428 LED Display Board 12.2 length X 4.2height.,10.6 length X 4.2height. Indoor P 2.5 pixel, density 160000 dots/sqm, module resolution 128x64 dots, module dimension 320 x160x15 mm frame frequency 60hz, single LED unit pixel, brightness 800-1000cd/sqm, gray scale up to 16bit/2.81 billion, optimum viewing angle 140x120, input voltage 220V AC, operating temperature 20°C to 50°C, cabinate size 320mmX160mm magnetic module, english/odiya/ any language for text, video, image, Indoor Active LED Video fixed on wall mounting with steel structure supply and installation Thickness of the screen>60mm Wall. (BIS certified module) LED: NATION STAR SMP. Ground Floor 795 MIS-INE-WORK SHOP 796 40000949 Recessed wiring to Tube Light Point ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection. ( Make of wire Finolex / Anchor / Havels/ V guard/KEI)(Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 797 40000970 Recessed wiring to Ceiling Fan Point ( MODULAR)with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V one way modular switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/ceiling rose-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 798 40000982 Point wiring for 5/ 6 amp socket outlet ( MODULAR) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V modular type switch & socket , phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc . (Make of wire Finolex / Anchor / Havels/ V guard/KEI) Make-switch/Socket-Legrand /Wipro-North West /Anchor-Panasonic/ havells)(Make of PVC pipe-AKG/NORPACK) Ground Floor 799 40001000 Recessed wiring to submain in 2 x 2.5 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.2)(Make of PVC pipe-AKG/NORPACK) Ground Floor 800 40001003 Recessed wiring to submain in 2 x 4 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.3)(Make of PVC pipe-AKG/NORPACK) Ground Floor 801 40001012 Recessed wiring to submain in 4 x 6 sqmm FR PVC insulated single core multistarnd copper conductor of ISI marked confirming to IS-694/1990 in 32 mm dia non metalic heavy duty flexible conduit 1.6 mm thick along with 2 x 2.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire Finolex / Anchor / Havells/ V guard/KEI) CSR SL .No- 1.8.10)(Make of PVC pipe-AKG/NORPACK) Ground Floor 802 40001033 Supply and laying of 25 sq.mm 3.5 core PVC Al. Arm Cableof 1.1 KV grade ISI Marked direct in ground including excavation , sand cushioning , protective covering and refilling the trench etc. as required. ( sl no- 5.1.1)(Make Cable- Finolex/ Havells/Polycab/KEI) Ground Floor 803 40001126 providing and fixing 8 SWG(4mm)dia copper wire on surface or in recess for loop earthing as required (sl no-3.18) Ground Floor 804 40001129 Supplying and fixing of 6X4 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-National / Royalam) Ground Floor 805 40001132 Supplying and fixing of 8X6 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr s l.no-1.24.5)(Make-(National / Royalam) Ground Floor 806 40001135 Supplying and fixing of 8X10 16/18 swg,2 deep G.I box of following size on surface / recesss with suitable size of 3mm thick phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required.(csr sl.no-1.24.5)(Make-(National / Royalam) Ground Floor 807 40001145 Supplying and fixing of 4 modular GI Box 18 swg with Modular base & cover for 4 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 808 40001148 Supplying and fixing of 6 modular GI Box 18 swg with Modular base & cover for 6 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 809 40001151 Supplying and fixing of 8 modular GI Box 18 swg with Modular base & cover for 8 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 810 40001154 Supplying and fixing of 12 modular GI Box 18 swg with Modular base & cover for 12 module (Sl. No- 1301,1421)(Make-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 811 40001166 Supply and fixing of 63 AMP 4P MCB-1NO,63 AMP,415 V CUTOUT-3 NOS WITH COPPER BUS BAR & INDICATOR ETC including all accessories and connections . [Make-(a) MCB/MCCB- Legrand/L&T/ABB/SCHNIDER(b)- Voltmeter, Ammeter-AE/CAPPA (c) ALL OTHER ACCESSORIES ISI MARK] Ground Floor 812 40001172 Supply of U-type fan hook(Make-TATA) Ground Floor 813 40001193 Blanking Plate(Make-Legrand /Wipro-NorthWest /Anchor-Panasonic/ havells) Ground Floor 814 40001228 Supply & fixing of 45 W LED STREET LIGHT FITTING on wall with , G.I. Bracket, Clamp & Nut Bolt connecting wire all accessories refer to catalouge No- MAKE- CROMPTON, CODE-LSTO-45-CDL /MAKE-PHILIPS, MODEL-GREEN LINE , CODE-BRP320 / MAKE-HPL, CODE-HPLLEDST4060S & HPLLEDSL4560S including fixing and connections as per instruction of Electrical Engineer-in-charge. Ground Floor 815 40001234 supply of Stepped type modular fan regulator.(Make-Regulator-Legrand/Wipro/ Anchor-Panasonic/ havells) Ground Floor 816 40001653 Recessed wiring to Security Light Point (1X36WT) with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS Box having front bakelight cover of suitable size, MS Box with 1.0 sq. FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection as per direction of Engineer in charge . ( Make of wire Finolex / L &T / Anchor / Havels/ V guard/HPL) Ground Floor 817 40002173 Point wiring for Instrument Point(modular) with 4.0sq.mm FR PVC insulated single core multistrand copper conductor ISI marked in recess 20 mm dia non metalic PVC flexible conduit with 2 nos of 15/16 Amp, 250 V modular type switch & socket ,& 2 nos 5 amp modular type switch & socket phenolic laminated sheet suitable size ISI marked MS Box & earthing Point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required as per direction of Engineer in charge . ( Make of wire Finolex / L &T / Anchor / Havels/ V guard/HPL) Ground Floor 818 40002868 Supply and fixing of 4 way , single Door MCB Box with 1 No 63 Amp. 4P Isolator with sheet steel encloser , distribution board, on surface/ recess, complete with tinned copper bus bar , neutral bus bar, earth bar, din bar , detachable gland plate, interconnection , phosphate and power painted including earthing etc as required.( Sl. No- 2.3.,2.7, ) Ground Floor 819 40008158 Supply and fixing of 1200 mm BLDC (ISI mark 5 star rated)(28wt with aluminium blade)ceiling fan (without remote) with connecting wire and all accessories including hanging and connections .- [MAKE- USHA MODEL-TECHNIX/ CROMPTON MODEL-ENERGIA GROOVE /V-GUARD /HAVELLS MODEL-EFFICIENCIA NEO/ANCHOR-PANASONIC MODEL-PENTA TURBO) Ground Floor 820 40008291 Supply and fixing of Earthing with GI earth pipe 3 meter long 40 mm dia Heavy Duty TATA make including accessories and providing masonary enclosure with cover plate having locking arrangement and water pipe etc with charcoal and salt as required.(Minimum 1.5 mtr distance from building & 3 mtr distance from earthing to earthing) Ground Floor 821 40008397 Supply and fixing of 4 FT 20 W LED Tube light fitting with lamp including fixing and connections (Make- CROMPTON(MODEL NO-CCS-102- 20-65-SL-DP-NWH/ PHILIPS(MODEL NO-SLIMLINE NEXT 4/ WIPRO(MODEL NO-LL20-221-XXX-65NE3) Ground Floor 822 MIS-IPH-Drivers R 823 10000314 Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification.Porcelin 23 inch LWC(ORISSA Pan) Ground Floor 824 10001056 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 mtr. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 20 mm outer dia CPVC pipes. Ground Floor 825 10001058 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 25 mm outer dia CPVC pipes. Ground Floor 826 10001060 Providing and fixing Chlorinated Poly Vinyl Chloride (CPVC) pipes conforming to IS:15778,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints should be at 430 Kg/Sq.Cm/1hr at 20 degree Centigrade complete. Make: ORIPLAST/SUPREME/FINOLEX (All SDR-13.5). 40 mm outer dia CPVC pipes. Ground Floor 827 10001064 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method; water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid for separately). 110mm dia. SWR pipe of Single Socket Push fit of class-3 (6Kg/Sq.cm). Make:- ORIPLAST/SUPREME/FINOLEX. 110mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 828 10001066 Laying in trenches/fixing on walls UPVC pipes IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by push fit method with water tightness joint test 0.5Kg/sq.cm/15min as per specification complete. (Earth work in trenches to be measured and paid separately). 160mm dia. rigid UPVC SWR pipe Class- 3 (6Kg/Sq.cm). Make: ORIPLAST/SUPREME/FINOLEX. 160mm dia. UPVC pipe, Class-3 (6Kg/Sq.cm). Ground Floor 829 10001068 Providing and fixing on wall face PVC 110 mm dia. offset SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. offset PVC SWR type. Ground Floor 830 10001070 Providing and fixing on wall face 110mm dia. single junction with door PVC SWR type moulded fittings, accessories for Rigid UPVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion . Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Single Junction with door PVC SWR type. Ground Floor 831 10001072 Providing and fixing on wall face 110mm dia. plain bend PVC SWR type moulded fittings / accessories for Rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Plain Bend PVC SWR type. Ground Floor 832 10001074 Providing and fixing on wall face 110mm dia. bend with door PVC SWR type moulded fittings / accessories for rigid UPVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. Bend with door PVC SWR type. Ground Floor 833 10001076 Providing and fixing on wall face 110 mm dia. cowel PVC SWR moulded fittings / accessories for PVC SWR pipes conforming to IS: 13592 Type B, including jointing with seal ring leaving 10 mm gap for thermal expansion. Make: ORIPLAST/SUPREME/FINOLEX. 110 mm dia. cowel PVC SWR type. Ground Floor 834 10001088 Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc. all complete as per specification with 1:4 brick work in cement mortar (1:4) and 12mm thick cement plaster. For 250mm thick wall. Ground Floor 835 10001094 Cutting holes in R.C.C floor and roofs up to 19cm thick for passing G.I/PVC pipes and fittings etc. and repairing the hole after insertion of pipes etc. with cement concrete (1:2:4) including finishing complete so as to make it leak proof. Details cost of 1 hole of average size 15cm X 15cm X 25cm. Ground Floor 836 10001098 Fixing floor traps of the following nominal diameter of outlet of self cleaning design with serewed down or hinged grating with or without vent arm complete includingcost of cutting and making good the walls and floors all complete as per specification. 110mm INLET & OUTLET FLOOR TRAP.make: ORIPLAST/SUPREME/FINOLEX 110mm Dia Inlet & Outlet floor trap PVC SWR type. Ground Floor 837 10001100 Providing and fixing EWC Commode floor mount(S/P trap) conforming to IS 2556: Part 3- 2004 duly fixed to head less socket caps/wall plugs and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification without cistern - Long pattern size 575x345x390mm. Make: Hindware POPULAR (CAT NO-20044 S-TRAP-28.5/P-TRAP-18.0)/Parryware ELITE (P-TRAP-CO278/S-TRAP-CO297) White Vitreous China Wash Down Water Closet (EWC). Ground Floor 838 10001116 Providing and Fixing PVC LOW LEVEL CYSTERN conforming to IS 2556 : Part 3- 2004 SIZE 415X130X305mm.Make: Hindware SUPERB (CAT NO-50 8829)/Parryware SLIMLINE ECONOMY (E-8090).White Vitreous china 10 litre (full flush) capacity manually controlled low level flushing cistern with all fittings and fixtures. Ground Floor 839 10001122 Providing and fixing of Standing urinal including connecting the urinal with 32mm dia. PVC waste pipe by means of white lead mixed with chopped hemp,15mm dia. PVC Reinforced heavy duty connection pipe etc. all complete as per specification. (White vitreous china clay half stall urinal flat back size-355X345X535 mm. Make: JAQUAR(URS-WHT-13261). Standing Urinal 355x345x535mm. Ground Floor 840 10001124 Providing and fixing of 25mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 25 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 841 10001126 Providing and fixing of 40mm dia. CPVC Full Way Valve/ Ball Valve conforming to the following nominal sizes with wheel as per specif ication complete . Make: ORIPLAST/SUPREME/FINOLEX. 40 mm dia. CPVC Full Way Valve / Ball Valve. Ground Floor 842 10001130 Providing and fixing of 15mm dia. CP Screw-down short body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR(CON-047KN-)/ KOHLER (K-27490IN-CP). 15mm diameter Short body bib cock. Ground Floor 843 10001132 Providing and fixing of 15mm dia. CP Screw-down two way Bib Cocks (Taps)polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux headand high quality). Make: JAQUAR( CON-041KN)/ KOHLER (K-25432IN-4-CP). 15mm dia. Two-way Short body bib cock. Ground Floor 844 10001134 Providing and fixing of 15mm CP dia. Screw-down long body Bib Cocks (Taps) polished bright with CP flange and CP extension piece of the following nominal sizes as per specification complete. (Delux Headand high quality). Make: JAQUAR( CON-107KN)/ KOHLER (K-27490IN-CP) 15mm dia. Long body bib cock. Ground Floor 845 10001136 Providing and fixing of 15mm dia. CP Screw-down angle Stop Cocks with flange of the following nominal sizes as per specification complete. (Deluxe Head and high quality). Make: JAQUAR (CON-059KN))/ KOHLER (K-11568IN-7B-CP). 15mm diameter Angle Stop Cock. Ground Floor 846 10001138 Providing and fixing of Screw-down 15 mm CP concealed Stop Cock with fitting sleeve, operating lever and adjustable wall flange and concealed body conforming to of the following nominal sizes as per specification complete. (Deluxe Headand high quality). Make: JAQUAR-(CON-083FTK+ALD-083FT). 15mm diameter Concealed Stop Cock. Ground Floor 847 10001140 Providing and fixing of 15mm dia. CP overhead shower rose 100mm round with rubit cleaning system including polishing all complete as per specification.(Deluxe Head and Heavy quality). Make: JAQUAR (OHS-1989)/ KOHLER (K-163561N-A-CP). 100 mm diameter / 15 – 20 mm width shower rose. Ground Floor 848 10001142 Providing and fixing of 15mm dia. CP shower arm 160mm long light body round shape for wall mounted with flange. including polishing all complete as per specification. (Deluxe Head and Heavy quality). Make: JAQUAR (SHA -477)/ KOHLER (K-99054IN-CP). 15 mm x 160 mm long size CP shower arm. Ground Floor 849 10001146 Providing and fixing of health faucet with 1.2m long PVC tube and wall hook. Make: JAQUAR (ALD-563) including all complete as per specification. 1.2m long PVC tube CP health Faucet. Ground Floor 850 10001148 Providing and fixing Stainless Steel soap dish holder fixed to head less socket caps, wall plugs with CP brass screws as per specification. Make: JAQUAR (ACN-1131N))/KOHLER (K-10712D-CP). Stainless Steel Soap Dish Holder. Ground Floor 851 10001150 Providing and fixing of 600x120 mm glass Shelf with anodised aluminium angle frame with chromium plated brassbrackets and guard rails of required size complete, fixed to head less socket caps, wall plugs with chromium plated brass screws as per specification. Size 600x120 mm glass shelf. Make: AQUAR-(ACN-1171N)/ KOHLER(K5636IN-CP). 600mmX120mm Glass Self. Ground Floor 852 10001152 Providing and fixing standard sized stainless steel towel rail of 600mm long complete with Chromium Plated brass brackets; fixed to head less socket caps, wall plugs with Chromium Plated brass screws, complete as per specification. (Make: JAQUAR (ACN-1111SM)/ KOHLER (K-5630IN-CP),(Heavy quality). 25 x 600 mm long SS Towel Rail. Ground Floor 853 10001154 Providing and fixing standard sized stainless steel towel ring with round flange complete with Chromium Plated brass brackets; fixed to head less socket caps/wall plugs with Chromium Plated brass screws, complete as per specification. Make: JAQUAR (ACN-1121BN) /KOHLER (K-5631IN-CP). SS Towel ring with round flange. Ground Floor 854 10001158 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to head less socket caps, wall plugs and washers complete as per specification.(AR-2013,SL. NO.-3.4.26). Make: Mirror Glass (SAINT GOBIN/AIS(ASAHI)). 600mm x450mm Bevelled Edge Mirror (Heavy quality). Ground Floor 855 10001160 Providing and fixing Rotational moulded polyethylene cylindrical vertical water storage tank 3layer wall conforming to IS : 12701--1996 including cutting holes through the tank and fixing, fittings CPVC tubes and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting up to a height of 5 metres above ground level and placing the tank to the required position etc. all complete as per specification. Make: SINTEX/SUPREME/ORIPLAST. Triple Layer Cylindrical Vertical water storage tanks. Ground Floor 856 10001166 Fixing wash basins WITHOUT PEDESTALwith hole for pillar taps with 10mm dia M S rack bolt (JAQUAR MAKE) painted white including cutting holes in walls and making good the damages etc all complete, with fixing of 15mm dia pillar cock, as per specification.(Vitreous china flat back wash basin 550x400x200 mm)(CODE CNS-WHT-801 JAQUAR MAKE).Pillar cock(CON-021 JAQUAR)32mm full/half thread CP waste(ALD-705/709-JAQUAR), Rack bolt(ZPS-MST-RB03)Vitreous china flat back wash basin 550x400x200mm . Ground Floor 857 10001209 Providing and fixing curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish size H:900XW:450mm with stainless Steel brackets including cutting holes in wall and making good the damages etc. complete as per specification. Make: JAQUAR (JSE-CHR-110UC450X/110US450X). Curved/Rectangular shaped urinal partition with 10mm thick frosted glass chrome finish. Ground Floor 858 SIG 859 50014253 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering<(>,<)>fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel-JINDAL/NIPPON of premium quality, Signage-3M (90CM EQUILATERAL TRIANGLE)# Ground Floor 860 50014255 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (80cmX60cm Rectangular) Ground Floor 861 50014257 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60cm circular) Ground Floor 862 50014259 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (90cm circular size) Ground Floor 863 50014261 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60CmX45Cm Rectangular) Ground Floor 864 50014263 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (90 cm high octagon) Ground Floor 865 50014265 Manufacturing, supplying and fixing retro reflective sign boards made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 25mmx25mm along with theft resistant measures, mounted and fixed with 2 Nos. S.S. square tube of 25mmx25mm to a vertical post made up of S.S. tube schedule 40 of 40mm dia tube welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 40mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M (60X60 cm square) Ground Floor 866 50014267 Manufacturing, supplying and fixing informative retro reflective sign boards/ prismatic retro reflective information sign board made up of 3 mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c and screws and anchor bolts including making holes in plates, providing & fixing ACP message plate of required size. The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect to fix on the wall. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M Ground Floor 867 50014269 Manufacturing, supplying and fixing retro reflective sign boards (single side) 8’x6’ made up of 3mm thick aluminium composite panel sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of S.S. tube schedule40 of size 40mmx40mm along with theft resistant measures, mounted and fixed with 4 Nos. S.S. square tube of 40mmx40mm to a vertical post made up to S.S. tube of schedule 40 of 50mm dia welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, flats, providing & fixing ACP message plate of required size. The post of the board will be 50mm dia SS tube of schedule40 grade The cost includes labour, material, civil works for fixing, buffering, fabrication, wastage, transportation, high intensity retro reflective sheet, finishing, etc. complete in all respect. FOR 2 VERTICAL POSTS. Make: steel- JINDAL/NIPPON of premium quality, Signage-3M Ground Floor 868 a) APPROVED MAKE /BRAND FOR CEMENT : ULTRATECH, NUVOCO, ACC, JSW (PSC),RAMCO(PSC),DALMIA(PSC),SAGAR(PSC) 869 APPROVED MAKE / BRANDS ARE TO BE UTILISED STRICTLY DURING EXECUTION OF ABOVE RELATED ITEMS OF WORK 870 Provision For 5 Year Repair & Maintenance (as stated in DTCN cl no.111) 1.75% 871 CESS