BRR : 3674411 Providing Cloth Mandap, Sound System And Generator On Rent Basis For Regional Agricultural Fair At Vasantrao Naik Marathwada Krishi Vidyapeeth, Parbhani- 1 Exhibition Dome 2 No. Providing and erecting temporary type waterproof arch type portal framesteel structurewith false ceilingand walls of whitecloth neat and cleanhaving minimum size 24 x 60 meter and center height 9.75 meter as per approveddrawing and widthof passage betweentwo rows of stallsis 6 meter flooring ofsyntheticcarpet. Front side of Dome with 4.57 meter should becovered by whitedecorated cloth/zalar. Domeincludes insidearrangement of exhibitionshould be in extruded aluminium type with laminatedpanels fasci in vinyl letters, each stall have to be providedthree tables with white cloths, three chairs, three spot lights, two plug points, one waste paper basket and 30 steel hooks for hangingexhibits. Electrical arrangement in dome ,150 ceilingfans 150 No. tube lights etc and 10 fire extinguisher each dome however if needed extrachairs and tables will have to be provided as per requirementetc. complete (As directed by Director of Extension Education). Dome Size :2Nos X 24X60 2 Stall Size 3X3. ( To be provided on gratis to university) 3 Mega stall Size:9.14X3. (To be provided on gratis to university) 4 Providing and erecting decorated cloth mandap for Self-Help Group food and snack stalls. The stalls frame should be made from 40 mm dia m.s. pipe or wooden ballies and ceiling and walls covered by decorated or white cloths, Syntheticcarpet for flooring , four tableswith whitecloths and ten chairs in each stall. Ceiling heightof stall is3.65 meter computersied name boardor flex at the entrance of stallssufficient lightining arrangement includingthree tube light and two plugpoints one dustbin in each stall (ON GRATIS TO THE UNIVERSITY) Self Help Group food and snacks stalls size : 5X5 (10 Nos) Front sidepassage 1.5 meter for each stall covered with white clothand fixed in bamboo ballies with green matting floor between two rows stalls (1.5X5) x 10 stalls 5 Self Help Group food and snacks stalls size : 5X5 (10 Nos) Front sidepassage 1.5 meter for each stall covered with white clothand fixed in bamboo ballies with green matting floor between two rows stalls (1.5X5) x 10 stalls 6 Providing partition wall of decorative Kanat in front of Exhibitiondome for passage kanat made from new a decorative cloth of Height3.65 meter fittedon wooden balli/bambu etc a)Kanat 7 Providing and erectingdecorativeentrance gate at the entrance of exhibition and separationof entrance gatefor men and women, includingflag posts with coloured flags and red colour carpet on pathway of main stage5 no. of halogen lightson road side. Along with series lighting at appropriateplaces 8 Providing Signage boarddisplaying general signage will have to be fixed at various places for information etc (As directedby Directorof Extension Education ) Size : 0.30X0.60 9 Providing Hydrogen Gas ballon of 7.62 Meter diameter endorsing logo and name of Vasantrao Naik Marathwada Krishi Vidyapeeth, Parbhani. at the site of Exhibiiton. All necessary arrangements viz. ballon, hydrogen gas cylinder for filling of the ballonand erection of the ballon in air will have to be arranged by the Mandap Contractor. The ballonshould be kept in air for three days i.e. 21/02/2024 to 23/02/2024 10 Providing RO Drinking water arrangement on exhibition ground 200 watercans/spot/day (Total 2 spots) and frequentlyfilled with RO Drinking water and glassesalong with a two person for distribution of water at each spots to visitors on exhibitionground includingdrainagearrangement Also give 2 water cans/day to each stalls separately 11 Providing and erecting decorated cloth mandap for control room. The stalls frame should be made from 40mm Dia. M.S. Pipe or wooden ballies, ceiling & walls covered by decorated or white cloth, synthetic carpet for flooring, five tables with white cloths and 10 chairs, ceiling height of stall is 3.65 meter computerized name board of flex at the entrance of stall, sufficient lighting arrangement including 10 tube lights & Four plug points, four stand fan one dustbin in one Big TV Panel in control room with operator. Control Room Size : 12.19X12.19 12 Waiting Room: 6.09X6.09 13 Providing Generatorsets for 24 hourspower supply with fuel and operator during the work andduring the period ofexhibition. Set should be properin working condition noiseless, smokeless. a)Generator set with mobile van 125 KVA 14 b)Generator set 40 KVA 15 Providing 500 watt P .A. /Sound system with cordlessmike, speakerand amplifiers, recordingsystem at the stage,Registrationcounter& control room etc 16 Providing fire fightingarrangement with fire brigade van. Sufficient no of fireextinguishers with operatoror as perthe statutory norms fire bucket filled with sandas per requirementetc complete 17 Providing security services with 20 security guards (Male and Female) in uniformswith cap, logo, batten, whistleform a reputedsecurity firm for a day shift and 10 guardsduring night for 2 daysetc complete 18 Providing House keeping with 20 sweepers with Uniform and labours for keeping campus cleaning, carting of wastage material, sweepers for keepingthe toilets neat and clean etc. using sanitary material included etc. complete. Cleaning of exhibition site at regularinterval will berequiredduring the period of exhibition. Garbagehas to be lifted (Approx.2 trip/day through vehicle) from ground on daily basis 19 Providing visitors counting machine of five counting sets at the entrance No. 1and counting the visitors at the end of every day and submission dataof totalvisitors in three days etc with back up of power supply 20 Providing Land Scaping at selected three spots in the guidanceof Horticulturist (Size of each spot 6.09X3) 21 Providing first aid facility as well as Ambulance 22 Providing Services of the following types, Interior Decorator, banner makers and any other related service.a) Announcers (3 Nos)b) Technology boards (6 Nos)c) Bannermakers (backdrops of main Dias all the three days for various event) 23 Providing sufficient no. of flowers bouquets for VIP 15 Big Size VVIP flower bouquets, 20 medium size flower bouquets on inaugural function & concluding days etc. and other day 20 no. regular flowers bouquets 24 Providing and supplying followingvariousitems on exhibition ground as per requirement and directions. Synthetic Carpet, for passages. 25 Jute carpetRed non woven carpet 26 Table with white cloth 27 Chairs 28 Tube light 29 Stand fan 30 Big size dezert cooler at seminar hall 31 Tower A/C at seminar hall 32 Tepoy 33 Plug point 34 Kanat 1.82 meter 35 Baricating 1.2 meter Ht 36 Sofa set 37 Lighting series (LED) 38 Street Drama stage with 0.60 meter Ht. 39 Duck point in the ground 40 Selfi Point 41 Dust bins Decorative and covered with flap having capacity 15 liter 42 CCTV Camera with PTZ Camera System installation of Fifteen CCTV Camera Set and Central Management with System 43 Providing and erecting requisite number of lavatories/urinals for gents and ladies separately, including VIP Laboratory near main dias and near waitingroom of dignitaries.Alsoready to use W.C. Toiletblocks. A) Lavatory blocks Gents 44 Lavatory blocks Ladies 45 Ready to Use Mobile Toilet (W.C) Gents 46 Ready to Use Mobile Toilet (W.C) Ladies 47 Providing temporary highmast type lighting arrangement at the cneter of exhibition ground etc. complete.Height- 9.14 No oflights 32 Nos 48 Publicity paper advertisement of event in colour in local (atleast 5 newspapers) and state level newspaper (at least 10 newspapers) in size of 5x 4 inches and as per govt. rates.Published Rabbi Agriculture Farm-2024 news in various newspapers shouldbe produce/submit to this Officefor final payment. Big hoarding for Parbhani city (5 NO) 10000 Posters(1.5X 3 ft) 3000 A4 Size coloured letters and information brochures for distributionin Marathwada and outside Marathwada) have to be doneby madap contractor. The University will do its ownpublicityof exhibitionfor larger participation of farmers. Event manager shouldsupply sufficientnumber of posters, letters and brochure to the University. 49 Big Size VIP Chairs for dais (Executive Chairs)

BRR : 6747755 Repair To Certain Misc B/R Items At Air Force Station Under Age (I) Af Amritsar; 84. CEMENT (i) The Associated Cement (xii) Lafarge Cement (Lafarge India (xxiii) M/s Dhruv Industrial Company Companies Ltd. Pvt. Ltd.) Ltd. Brand: “ACC” Brand: “LAFARGE” Brand: “DHRUV” (OPC 43 Gr. & PPC). (OPC 43 Gr. & PPC). (OPC 43 Gr. & PPC). (ii) M/s Cement Manufacturing (xiii) M/s Shree Guru Kripa Cement (xxiv) M/s Chettinad Cement Company Ltd. (Pvt.) Ltd. Corporation Ltd. Brand: “STAR” (OPC 43 Gr, Brand: “SARTAJ” Brand: “CHETTINAD” (OPC OPC 53 Gr & PPC). (OPC 43 Gr. & PPC). 43 Gr, PSC & PPC). (iii) M/s Birla Corporation Ltd Brand: (xiv) M/s Heidelberg Cement India (xxv) M/s Toshali Cements Pvt. Ltd. “BIRLA” Ltd. Brand: “GAJAPATI” (OPC 43 Gr & PPC). Brand: “MYCEM” (PPC). (OPC 43 Gr, PSC & PPC). (iv) M/s JK Cement (xv) M/s My Home Industries Ltd. (xxvi) M/s Barak Valley Cements Ltd. Brand: “JK” Brand: “MAHA SHAKTI” for Brand: “BVCL” (OPC 43 Gr & PPC). PSC, “MAHA” for OPC 43 Gr & (OPC 43 Gr) “MAHA SHAKTHI” for PPC. (v) M/s Orient Cement (xvi) M/s Ultra Tech Cement Ltd. (xxvii) The India Cement Brand: “ORIENT” Brand: “ULTRATECH” (OPC 43 (OPC 43 Gr & PPC) (OPC 43 Gr & PPC). Gr, OPC 53 Gr & PSC). (vi) M/s Mangalam Cement Ltd. (xvii) M/s Parasakti Cements Ltd. (xxviii) Andhra cement Ltd. Brand: “MANGALAM” Brand: “PRASAKTI” (OPC 43 Gr & PPC). (OPC 43 Gr & PPC). (OPC 43 Gr & PPC). (vii) M/s Shree Cement (xviii) M/s Zuari Cement Ltd. (xxix) Century Cements Brand: “SHREE” Brand: “ZUARI” Brand: “CENTURY” (OPC 43 Gr & PPC). (OPC 43 Gr & PPC). (OPC 43 Gr & PPC). (viii) M/s Jaypee Rewa Cement (xix) M/s OCL India Ltd. (xxx) Binani Cement Ltd. Brand: “JAYPEE” Brand: “KONARK” (OPC 43 Gr Brand: “BINANI” (OPC 43 Gr & PPC). & PPC). (OPC 43 Gr & PPC). (ix) M/s Dalmia Cement (Bharat) Ltd (xx) M/s Saifco Cement Pvt. Ltd. (xxxi) JK Lakshmi Cement Ltd. Brand: “DALMIA CEMENT” Brand: “SAIFCO” Brand: “JK LAKSHMI” (OPC 43 Gr & PPC). (OPC 43 Gr). (OPC 43 Gr & PPC). (x) M/s Sanghi Industries Ltd. Brand: (xxi) Ambuja Cement Ltd. (xxxii) Madras Cement “SANGHI” (OPC 53 Gr & PPC). Brand: “AMBUJA” Brand: “MADRAS” (OPC 43 Gr & PPC). (OPC 43 Gr. & PPC). (xi) M/s Prism cement Ltd. (xxii) Saurashtra Cement (xxxiii) Grasim Industries Ltd Brand: “PRISM” Brand: “SAURASHTRA” Brand: “GRASIM” (OPC 43 Gr & PPC). (OPC 43 Gr. & PPC). (OPC 43 Gr & PPC). 85. REINFORCEMENT SAIL/RINL/TISCO/ M/s Shyam Steel Industries Ltd, Durgapur (West Bengal)/M/s SPS Steel Rolling Mills Ltd STEEL (PRIMARY Durgapur (West Bengal)/ M/s Jai Balaji Industries Ltd Durgapur (West Bengal), M/s Steel Exchange India Ltd PRODUCERS) Hyderabad (AP), M/s Jindal Steel & Power Ltd Gurgaon (Haryana), M/s SRMB Srijan Ltd Kolkata (West Bengal), M/s Concast Steel & Power Ltd., M/s Adhunik Metaliks Ltd., M/s Shri Bajrang Power & Ispat Ltd., M/s JSW Steel Ltd., M/s Electrosteel Steels Ltd., M/s Shyam Metalics & Energy Ltd./any other primary steel producer approved by E-in-C‟s Branch 86. STRUCTURAL SAIL, RINL, TISCO, M/s Jindal Steel & Power Ltd Gurgaon (Haryana), any other primary steel producer STEEL (PRIMARY approved by E-in-C‟s Branch PRODUCERS) 87. STRUCTURAL (i) M/s K L Steel Pvt Ltd, Post Box No. 61, Lal Kuan, Bulandshahar Road, Ghaziabad (U.P) (Tele: 0120- STEEL 2867911, 2867915, Fax : 0120-2867917) (SECONDARY (ii) M/s Shri Badrinarain Alloys & Steels Ltd, 95, Stephen House, 4 BBD Bag, Kolkata – 700 001 (Tele: PRODUCERS) 033-2220 5381/2248 1601, Fax: 033-2248 8664) (iii) SRMB Udyog Ltd, 46, BB Ganguli Street, Kolkata – 700 012 (Tele 2236 9999) (iv) M/s Tata Steel Structure, Tata Steel-Tube Division, Jeevan Tara building, 1st Floor, 5, Sansad Marg, New Delhi-110001 (Tele: 991112334, 264601734, 309983, 309986) (v) M/s K L Concast Pvt Ltd, Z-18, Naraina, New Delhi. (vi) M/s Karam Steel Corp, Nasrali Road, PO Box No. 56, Mandi Gobindgarh – 147 301 (vii) M/s T K Ispat (Pvt) Ltd, 409, City Tower, 17, Boat Club Road, Pune-411 001 (viii) M/s Doaba Steel Rolling Mills, Amloh Road, Mandi Gobind Garh (Punjab), (ix) M/s SPS Rolling Mills Ltd, Himalaya House, 3813, 8 th floor, Chowringhee Road, Kolkata-700 071 (x) M/s Shree Sharma Steel Rolling Mills Pvt Ltd, 90 ABC & 91-B, Industrial Area, Jhotwara, Jaipur (xi) M/s Shree Krishna Steel Rolling Mills, Jaipur (xii) M/s Fortune Metal Ltd, Mandi Gobind Garh (Punjab) (xiii) M/s Kamdhenu Ispat Ltd, A-1114, RIICO Industrial Area, Phase-III, Bhiwadi-301019, Distt: Alwar (Rajasthan) (xiv) M/s Paras Nath Steel Rolling Mills, Durga Pur (WB) (xv) M/s Amba Steels, 21/6, West Patel Nagar, New Delhi-110 008 (xvi) M/s Rathi Super Steel Ltd, 3-B, Vandana Bldg, 11, Tolstoy Marg, New Delhi (xvii) M/s Madhav Udyog Pvt Ltd, PO Box No 61, Lakkuan –Buland Sahar Road, Ghaziabad (UP) (xviii) M/s Prem Steel & Allied Industries, GT Road (Sirhind Size) Mandi, Govindgarh, Punjab-147 301 (xix) M/s Kashmir Steel Rolling Mills, SIDW Industrial Complex, Bari Brahmana, Jammu (J&K) 88. Chloro-pyriphos Pest Control (India) Pvt.Ltd, Pest Delfin Pest Control Services New Delhi, emulsifiable Control Services, Delhi, Montari Dhawan Pesticides Delhi, Pest Control Services concentrate Industrial Ltd, New Delhi, JS Pest of India, New Delhi, BL Kapoor, New Delhi, (20 EC) Control Chandigarh, De-Nocil Dr Swarops Pest Control, Punjab United Pest Bombay Control Ludhiana, Pest Eradicators (India) New Delhi, Pest Control corporation Delhi, Pest Control organization Delhi, Trishul 89. Lindane-20 EC India Pesticides Ltd, Lucknow, Kanoria Chemical india Ltd, Pest Control (India) Pvt Ltd. 91. Gammax-20 India Pesticides Ltd, Lucknow, Tata Chemicals, Pest Control (India) Pvt Ltd. 92. Pressed Steel Door M/s SK Steel Fabricators Ludhiana, SS Engg Industries, Ghaziabad, Dahiya M/s Anoop Frames/Chowkhats M/s Sehgal Doors, New Delhi, M/s Industries,Panchkula, M/s Metal Window Industries, M/s for Doors/Cupboard Bhawani Steel Fabriction, Gaziabad, Corporation, New Delhi, M/s Ishwar Industries, Mohata Engg & and Window frames M/s India Mart Intermesh Ltd, Hyat Meerut, M/s Trishul Industies, M/s Aswani & Construction Co, Interiors, M/s Ashish Industries Sons, M/s Jangid Engineering Works, Bikaner, M/s Ghaziabad, M/s GS Udyog, Kanpur, Shri ChhabraSteel Krishna Associates, Panchkula, Steel Master Udyog, Meerut,M/s Industries, Panchkula, Pioneer Fabricatrion Chandni Industries, Meerut, Vardhman Precision Tubes and M/s Ashish profiles, New Delhi M/s Royal Safe Works, Industries, M/s New Delhi, M/s Delite Safe works, New Delhi, Ashwani & Sons M/s Jangid Engineering Works, M/s Steelman Industries, Jalandhar,M/s laxmi steel Works, Rohtak, M/s Ashish Industries, M/s Ashwani & Sons 93. Steel Window/Vents Agew Steel Manufacturer Pvt. Ltd, Ganpat doors, Rajpura, M/s Metal Window Anup Industires, M/s Ahmedebad, Multiwyn Industial Corp, Corporation, M/s Mohindra Fabricators, M/s Chandni Industries, Kolkata, Satkar Industies, Pathankot SK Fabrication (India) M/s Gurjeet Industries, Sen Harvic, Mumbai, Rd Jalandhar, Arcat, M/s Ashish M/s GR Kalsi & Co, M/s SKS Industires, M/s M/s Bihar Bobbin & Industries Steel Plasts Machines, M/S Surbi Metal (India), Engg Works, Katihar, Govind Enterprises,Delhi, M/s GS Udyog, M/s Mohata Engg & Kanpur, M/s Shree Krishna Associates, Construction Co. Panchkula, M/s Jangid Engineering Works, Bikaner, M/s Ashish Jaipur, Godrej and Boyce, Mfg, Mumbai, Steel Industries Master Industires, Jalandhar, Shri Krishna Associates, Punchkula, M/s Bharat Steel fabrication & Engineer, Ghaziabad, M/S Laxmi Steel Works , Rohatak, M/s Steel Man Industries Jalandhar, M/s Ashish Industries 94. Rolling Shutters & Swastik Rolling Shutters & Prakash & Co, New Delhi, Ishwar Industries, Rolling Grills manufacturing works, Mumbai, Meerut Cantt, Dahiya Industries, Panchkula, Hercules Rolling shutters Bangalore, Shubdwar, M/s Prakash Industries, SKS Steel Standard Industries Pune Industires, New Delhi , M/s Akash Rolling Shutters, Delhi, M/s Auto Rolling Shutters Enterprises, Delhi, Rama Rolling Shutters industries New Delhi, Shri Krishna Associates, Panchkula, M/s Bharat Rolling Shutters Industries, Jabalpur, M/s Prakash Rolling Shuttter Delhi,M/S Steelman Industries, Jalandhar, Chabra Steel Udyog. 95. Welded wire Multiweld Wire Co Ltd, Mumbai, Mesh/Fabric Jainsons Sales Crop, Delhi, Jaisons industries 96. Factory made M/s MP Wood Product Indore, M/s Chandigarh Timber Products, Patiala, M/s New M/s Rajendra, M/s Paneled Door Jainwood Industires (Jayana Board) Jagdamba Doors, M/s AB Composites Pvt Ltd, Neha Shutters Delhi, M/s Jain Doors Pvt Ltd Sonipat. M/s Haryana Industries, M/s Supreme Doors Indusries, M/s Goel and allied products, kanpur, M/S NND Wood Brothers, Raipur, M/s Industries, Srigananagar, M/S Shakti Industries, Surbhi, Metal India Dhanaula. M/s Sarab Enterprises, Kangra, M/s Ltd Jodhpur. Ecocell Doors, Udaipur, M/s Massonite Doors, Pathankot, Pioneer Timber Products, Chandigarh, Goyal Industiral Corporation New Delhi, Shri Krishna industries, Panchkula, M/s Laxmi Doors, M/s Joinery Manufacturing Co Kolkata, 97. Factory made Flush M/s Green Ply Industries, M/s Sitapur Plywood Manufacturers Sitapur, M/s Harkirat Industries, door Shutters Centuary Ply, M/s dura Ply. Mysore M/s Laxmi Doors, Lucknow, Merino M/s PR Ceiling Products Chip Board, Archid, Swastik Ply Flush Door, Faridabad. MP Wood, Goyal Wood, M/s Jain Wood Industries Industries Faridabad 98. PVC Door Frame/ Sintex, Rajshri Plastiwood Ltd, M/s M/s Poly Window, Pune Accura, Polytech Shutters Dura Plast Extraction PVt Ltd, M/s Ahmedabad, Fixopan indo Plast Pvt Ltd Fenesta New Delhi 99. UPVC Window/ Fenesta, Veka Industries Pvt Ltd Accura Polytech, Kumar Arch Tech, Poly Doors Mumbai, Kundli Industrial Estate, windows, Pune, H2O Solution (Window & Sonipat doors) 100. Iron Mongery Mowjee, M/s Kitch Architectural Product Pvt Ltd, RS Industries. 101. Standard Mortice Godrej, Harrison, Link lock 102. Hydraulic Door Everest, Universal, Godrej Amar, Sandhu, Priya Closer 103. Anodised Aluminium Fenesta, Jindal, Indal , Hindalco, M/s Alumininum System Corp, Mumbai, Nairs M/s Ashish Industries Doors/ Window/ Ashish Industries Arkinetal Enterprises, New Delhi, Frames/ Partitions Aluminium Manufacturing Co, Kolkatta, Santosh & Co, New Delhi, Dada Aluminum Fabricators, Jalandhar, M/s Alumilite PVt Ltd, Dhiraj, M/s Ajay Industries, Bombay,M/s Ramniklal S Raste,, Jabalpur, M/s Aluminium Tech Industries, Delhi, M/s VR Associates, Delhi, Mahavir, Ambala,Consolidated Engineer Com, New Delhi, Aluminium PVT LTd, Ajit India Pvt. Ltd, M/s Ashish Industries 104. Aluminium wooden Argent Industries, Mowjee, Crown M/s Elite Enterprises, Mumbai, M/s Doors and Window Classic New Delhi, M/s aluminium Fittings Udyog, M/s Mohan Metal Industries Delhi 105. Aluminium Section Hindalco, Jindal, Indal Valco Industries Ltd Chandigarh, Banco Aluminium Ltd. Vadodra Gujrat. 106. Aluminium Sheets NALCO Pvt Ltd, CRIL, Jindal, Jagdish Aluminium Pvt Ltd, Ahmedabad, BALCO Gurjat, Alco Industires Pvt Ltd New Delhi 107. Aluminium ALCO Bond, Aluminium Clad, Alstone Composite Alstrong, Armstrong Panels 108. Particle Board Kitply, Nova Pan Industries, New Bakelite Hylam LTd Asis Particle Board, Shirdi (Veneered Delhi, M/s Green Ply Industries Ltd, Industries, Arolite Ceiling & Unveneered Archid Ply, Bhutan Board, Dura System Pvt Ltd , M/s Laminated) Board Mysore Chip Board Ltd Associate Décor Ltd 109. Plywood for General Dura Ply, Archid ply, Bhutan Board, Swastik Ply, Jaipur, National PlywoodSh Ram Pannels Pvt Ltd Purposes Archid Board, Century, Industries Pvt Ltd, Kolkata, Merino Punjab, Rams Wood & Durian,Mysore Chip Board Ltd Plywood, Mayur Ply, Jayna Plywood, M/s General Industries Ltd, Janardhan Ply Board Industries BLJ Plyam Marketing Pvt Ltd, MP & Co. 110. Decorative Archid Lam, Sunmica, Merino, Lam, Sungloss, Formica, ecolam, Bakelite Laminates Mysore Chip Board,Greelam Hylam 111. Fibre Board(Medium Novapan, Bhutan Board, Kit Ply, Managalam Timber Products, Kolkatta, Density) Mysore Chip Board Ltd, Green Panel Ramco Industries Ltd, DECO, Green Max (plain exterior Grade Panel Max Plain exterior MDF MDF/prelam/veneered MDF/Green Floormax Laminated) 112. Pre Fab Panel Lafarge, Boral Gypsum Board Pvt Ramco Industries Pvt Ltd, Endura M/s PR Ceiling Product, Boards/Wall Lining Ltd, Shri Nepal Board Ltd, Aerolite Modular Systems, Reliance Bldg System, Dexune Marketing Pvt ceiling tiles Ceiling System Pvt Ltd, Hilux, BPB India Gypsum Ltd Ltd, M/s Bharat Steel Roll Armstrong BahadurGarh(Calsi Brand) 113. Galvanised steel SAIL, TATA, Jindal Aone Industires, Bhushan, CRIL, Prestar sheets & Colour Coated galvanized steel sheets 114. Polycarbonate Sheets Duratuff, Lexan , VMT Plaste Ltd M/s Coxwell Domes Engg Pvt Ltd 115. Galvalume sheets Indian Ispat, TATA Blue scope, JSW Multicolor, aone industries, metco Global, CRIL, Kirby, Prestar 116. AC Sheets/AC Boards Charminar, Ramco, Everest Swastik, Bombay, M/s Eternit (Corrugated, Semi Everest Ltd, UP Asbestos Ltd Corrugated) 117. Gypsum Board India Gypsum, Lafarge, Son Industries Kanpur 118. PVC Tiles/Sheet Primer Polyfilm Ltd, Wonder Floor, Rikvin Floot Ltd, New Delhi, Armstrong Fixopen Machineries, New Delhi, Krishna Tiles, Polyfin 119. Glass Mosaic Tiles Johnson, Italia, Coral Mosaic, NITCO Paladio, Accura, Bisazza, Mridul, Unistone, Arihant 120. Terrazzo Tiles / PCC NTC,NITCO, Eurocon, Duracrete Ultra Tiles Pvt Ltd Bharat Oasis vitrified Pvt Ltd. Tiles/ PCC Chequered tiles Tiles, Mehtab Tiles, Regent Tiles, Hindustan Tiles, SS tiles 121. Interlocking Tiles/Exterior Unistone, NTC, NITCO, Ultra, Johnson Terra Firma, A-One tiles, Shree Tiles Tiles/ Paver Blocks Coral, Mehtab, Tiles, Pavit, SS Tiles, Hindustan Tiles 122. Decorative Unitile, Bakelite Hylam (Heritage) NCL Luxture surface coatings, textures/Coatings AltekSeccolor, Dulux (Acratex), Apex Spectrum Paint (Duracast) 123. Exposed Brick Façade Unistone, Pioneer Bricks, Regent Tiles 124. Glazed Earthen Ware H &R Johnson, Kajaria, Somani Orient Ceramic, Asian, Tiles Vermora, Orient Bell 125. Glazed Ceramic/non Skid Kajaria, H&R Johnson, Cera, Unistone, National tiles , Ultra, tiles, Victory Ceratec, Sogo Wall/Floor Tiles Somani, NITCO, Eurotiles, Spartek Orient Ceramic, Asian, Ceramics, Oricle Swastik, Varmora, Orient Granites, Royal tiles, Bell, Bonzer-7 (Trial) GEM tiles, Regency, Romano, Ferrous- Crete, Mashusudan Ceramics, Pavit Ceramic, Oasis Vitrified 126. Vitrified Tiles Somani, Kajaria, Johnson, Orient Bell, Murdushwar Ceramics Ltd, Oasis Vitrified, Oracles (Normal/Anti skid) NITCO Orient, Asian, Swastik, Granito. Crystal, Bonzel-7 (Trial) 127. HDPE Storage Water Sintex, polycon, sheetal Rotex, Fusion, SPL, Diplast Uniplus Tanks Plastics, Aqua Polymers 128. Sanitary appliances/ fittings Hindustan Sanitary Ware, Parryware, Duravit, Madhusudan Blue Star Sanitary, (Chinaware) Cera, Jaquar, Neycer Ceramics Anupam Industires, Sona Ceramic, Prakash Industries, SFMC Solution 129. Water Closet Seats and Parryware, Jaquar, Somani, Commander, Supreme, Prayag, Polytuff, Ajanta, Precision cover (Solid Bakelite) CERA, Neycer Milennium Products Thermostat Moulded toilet seat cover 130. PVC Flushing Cisterns Hindustan Sanitary Wares, Commander, Khodiyar Pottery Works, Precision Products Parryware, CERA, Jaquar, Johnson Pedar, Milennium, Supreme, Prayag Neycer 131. CI Flushing Cistern Hindustan Sanitary Ware, Parryware, Sanifix Inida, Phenoweld Areal Bros, Hind Iron Orient Sanitary Ware Polymer, Anupam industries Foundry, Jaipur Maze Products 132. Stainless Steel Kitchen NIRALI, Kobra, Neelkanth, Jayna Blue Pheonix, Diamond, AMC, RA EngineeringSink with or without Star Prestige, Allex, Neel, Prayag Industries, Plasto Craft, Draining Board, Plate Polymers, Anupam Industries, Impex Sanitation, Kodar Rack Vardhaman Enterprises (Jain Industries ko), Elite Metal Products, Franke India Pvt Ltd Prakash Sanitary Appliance, Shakti Enterprises 133. Ball Valves (Horzontal Dripless Faucets India, Flowjet , Ball Hind Enterprises, Prakash & Plunger type) Valves India. Co, Leader valves, Bombay metal, Taurus Engineering Industries, Prima 134. Shower Roses Chromium GEM,JAQUAR Jainko, Blustar, Prima 135. Bath room Fancy fittings JAQUAR,GEM,MARC, Anchor, Spectrum, Pico, Dripless, Kingston, Prima 136. Bib Taps and Stop Taps JAQUAR, PARKO, GEM, Marc, ESS ELITE, Zim, Prima, Essco, (CP) Fancy fittings ESS, Jainko, Prayag 137. Ready Made Bathroom Jaquar, Cera, Commander, Parryware Gratolite,Alpina,Prayag Cabinets 138. Salt Glazed Stone Ware Devraj Industrial, Buran, Perfect Santiary Shri Kamakshi Agencies, Hind Bhaskar Sons, TriumatiPipes/ Glazed Stone Ware Pipe, Superme Pipe and fittings Creamics, Bhardwaj stone Ware, Moulds, Kiran Potteries Pipes Binary Udyog, Creamic Industries 139. Concrete Hume Pipes Indian Hume Pipe Company Jain Spun, Daya Spun Delhi Hindustan Pressure Spun pipe, Ramnik Enterprises Pipes, Bhasker Sons 140. AC Pipes Hyderabad Asbestos,Everest, Ganga JK Super Pipes, Sarbamangala Poddar Industrial Asbestos, Konark Cement and Asbestos Manufactruing Co, Maharashra Corporation Asbestos 141. PVC Rain Water Supreme, Finolex, Reliance Kissan, Prince, Diplast Plastics Pipe/Sewage Pipes 142. GI Pipe /fittings Jindal, TATA, NECO, UNCO Steel Nidhi Pipe Ltd,Swastik Ltd, Tirupati, J-Steel, JTL Industries, Bharat Steel Tube Delhi Surya Roshni (Prakash) Indus Tubes Ltd 143. CI Pipes Fittings (For SKF,SRIF, Singhal Iron Foundry, Ashutosh Casting Ltd, Veetus Bhara Industrial corpn Sewerage/Rainwater) Hindustan Engineering Products, Jindal Industries Ltd, Anand Founders Delhi, New India Saw, NECO (Jayaswal), HEPCO (Binary & Engineers, Electrosteel, Foundry, Ludhinana, Udyog) Kesoram, BIC. Mahavir Iron Foundry 144. Soil Waste Pipes fittings/ SKF, Singhal Iron Foundry, NECO, BIC steel Manhole Cover SILC 145. PPR Pipes SFMC ,SAFE,WETFLOW Diplast Plastics, VeekayHindustan Plastics & Technocrat Pvt Ltd, AmitexMachine Corpn Polymers, Kitec Industries Ltd 146. HDFE Pipes/SNR Gamson India, Dustron, Rex Kirti Industries India Ltd, Vertex Nandi Polymer, Tirupati, Pipes(Water/Sewage) Polyextrusion Green Poly Pipes, Uniplus, Structurals Ltd, SRIF, SKF Diplast Plastics 147. Sand Cast Iron Spigot & SRIF, RIF (Gola Castings), NECO Raj Iron, Foundary, BIC KK Pumps Socket Soil Waste, Vent (Jayaswal), HIF Kolkatta, Kajecao Pipes & fittings 148. Cement Based Paints Snowcem,Asian, Jenson & Nicholson, Acquolac Paints, Godavari Gattocem, Rubycem, Berger, Duracem Paints, Rajdoot Paints, Classic Cemkote, Snow White Paints, Acro Paints Industrial Corpn149. Dry Distemper/Oil Bound Goodless Nerolac Paints, Jenson & Shalimar Paints, Godavari Distemper/ Plastic Nicholson, Berger Paints, ICI Dulux, paints, Acro Paints Emulsion/ Exterior Asian paints emulsion/ Silicon paints & Coating 150. Plastic Emulsion Paint Berger (Silk,Rangoli easy clean), Asian Berger (Rangoli emulsion), Berger (Bison emulsion), (Royale, Apcolite advance), Akzo Nobel Asian (Premium emulsion), Asia (Tractor emulsion), (Velvet touch), Nerolac (Impression Akzo Nobel (Super smooth), Akzo Noble (Rainbow), Ecoclean, impression 24 carat) Nerolac (Lotus Touch Beauty Nerolac (Beauty silver, Gold), Jenson & Nicholson Little Master), Jenson & (Eqvt. Make), Shalimar (Eqvt. Nicholson (Eqvt. Make) Make) Shalimar (Eqvt Make) 151. Paint Exterior Berger (Weather Coat all guard), Asian Berger (Weather Coat smooth), Berger (Walmasta), (Apex Ultima) Akzo Noble (Weather Asian (Apex weather proof) Asian (Ace) Akzo Noble shield max), Nerolac (Excel total) Akzo Noble (Weather shield), (Promise), Nerolac Nerolac (Suraksha Advanced) (Suraksha Plus) 152. Synthetic Enamel Paint Goodless Nerolac Paints, Jenson & Aquolac Paints, Shalimar Paints, Nicholson, Berger Paints, ICI Dulux, Acro Paints Asian paints 153. False Ceiling Tiles/ Board Lafarge, Boral, Gyproc, Armstrong, Reliance big System , BPB India Dexune Marketing, (Gypsum Board/ POP/ Diaken, Lloyds, Luxalong. Ltd, Shree Nepal Boards, Bhutan Endusa Modular System Mineral Fibre) Boards, Duratuff, Anchor 154. Drapery rods Vista Levalor Vista Levalor Vista Levalor 155. Mirror Looking Saint Gobain, Modi Float, Triveni Float Saint Gobain, Modi Float, Saint Gobain, Modi Glass Triveni Float Glass, Crown, Float, TriveniFloat Prayag polymers Glass, Crown, Prayag polymers ... more in document

BRR : 7667705 Tender For Construction Of New Library At Indra Nagar Chennai; 1 DISMANTLING WORK 2 Dismantling & removing the existing Reinforced Cement Concrete work etc., by using required mechinaries including stacking of steel bars and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge. 3 Dismantling brickwork manually by mechanical means including stacking of serviceaboe material and disaposal of unservice material within 50 meters lead as per direction of Engineer in charge.. 4 Dismantling , removing and carefully stacking Doors & windows including removal of frames,hinges and fastenings etc., complete complying with standard specification and as directed by the departmental officers at site of work. 5 DismantlingFloor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs 6 Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 10 KM from site. The rate shall include loading into the tipper/ lorry transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in- charge. 7 Dismantling & removing the existing Plain Cement Concrete work etc., by using required mechinaries and disposal of unserviceable material within 50m lead, labour charges, as per direction of Engineer in charge. 8 CIVIL WORKS 9 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size bouldersand Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrockrequiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete SS.20B 10 cum 10 Supplying and filling in foundation andbasement with excavated soil other than sand in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 11 excavated soilrefilling- foundation 12 cost of earth anf filling 13 Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 14 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 15 Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive ofgiving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12to a depth of 8 in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc., 16 Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including C & U clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc.,Rate to include all materials, labour charges, wastages ,placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by theClient / Engineer-in-charge. 17 Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slab / beams and such other members 18 Reinforced cement concrete Column footing, plinth / grade beam, bed blocks, template surfaces, steps, piers, raft slab / beams and such other members 19 For plane surfaces such as recangular or square columns, sunshades, top and bottom slab of boxing, kitchen platform, loft and such other structural members 20 Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by theEngineer-in-charge 21 FOUNDATION AND BASEMENT 22 GROUND FLOOR 23 FIRST FLOOR 24 MEZZANINE FLOOR AND HEAD ROOM 25 Supplying, fabricating and fixing in position of steelFe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge. 26 Supply and constructing Fly ash Brick masonry in Cement Mortar 1:5 (One cement and Five M sand) in foundations, basement and superstructure usingFly ash Bricks of size 230x110x75mm etc. Rate to include all materials, labour charges, wastagesfor working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by theClient / Engineer-in-charge. 27 FOUNDATION AND BASEMENT 28 Ground floor 29 First floor 30 mezzanine floor 31 Terrace floor parapet 32 compound wall 33 Supply and constructing Flyash Brick partition wall 115mm thick in Cement Mortar 1:3 (one cement and three M sand) 11.50 CM thick using usingFly ash Bricks of size 230x110x75mm including both side plastering with CM 1:5 12mm thick and usinghoop iron reinforcement if found necessary and hoop iron shall be supplied to the department at free of cost etc., complete as directed by the Engineer in- charge. 34 GROUND FLOOR 35 FIRST FLOOR 36 Providing and laying weathering course on terrace in brick jelly limeconcrete in ratio 1:2 ( I lime: 2 brick jelly ) the size of the brick jelly should not be more than 25 mm and not be less than 20 mm . The rate includes the cost of all material and lanour involved .provide and lay one course of first quality pressed clay tiles 200x 200 x 20 mm thickness size of approved brand for terrace floor and sides over a bed of cement mortor mix 1:3 with water proofing compounded added rate to include for pointing jonts with neat cement . 37 WATER PROFFING TOILETS AND OPEN TERRACE- Water proofing treatement for top surface and all side of sunken porton in the followingsequences including all labour . Materials , tools lead and lifts etc, a) cleaning of RCC remove dust completely , b). supply and application of cm 13 mixed with niobond SBF latex or equivalent polymer modified high quality cmulsionas a coving at the corners of floor and the vertical surface in the sunken area and between floor and walls in he remainig area c) apply first coat of brushbond RFX or equivalent acrylic polymar modified cementitious water proofing membrane coating on the prepared mofified cementitious waterproofing membrance coating on the prpered surface in a contionous film on the sunken floor area vertical sutfaces up to finished foorlevel , the coating also continued on the inner surfaces of the pipe penetration holes . 38 Finishing the top of roof with one course of Solar Reflective ceramic tiles of size 305 mm x 305 mm x 7 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete 39 FRONT ELEVATION - Construction of 4½thick walls usingavailable good wire cutbricks with strength 30 - 50 kg sq cm of super structure above plinth level in cement mortor 1:4 ( 1cement :4 coarse sand ) including al leads and lifts for all floors supply and placing of 25 mm x 16 gauge hoop iron for every fourth course half brick masonry wall and providing lateral supports if length of the wall exceedinf 3m as per specifications including curing , scaffolding all materials in labour etc . complete at all floors levels incuding the cost of cement 40 Providing two legged scaffolding using 15cm dia casuarinas post of 4.0 m over all length of (3 M Height+0.5 M over all length (3.0M height +0.5m projection +0.5m in to the ground ) the distance between the two rows being 1.25M and the spacing of posts being 2.0M in both the rows with two horizontal posts with 0.5M overlap on either side and braces at 2.0M centre to centre including longitudinal and traverse middle braces to step up and transverse middle braces to step up and providing a plat form with country wood planks of 40mm thick and 1 M width ,etc in a complete form using coil and nails (Rate for an initial height of 3.0M and length of 1 M) 41 Upto 3 M Height 42 For every additional height of 2.5 M (3m - 5.50m) 43 For every additional height of 2.5 M (5.50m -8.00m) 44 For every additional height of 2.5 M (8m -10.5m) 45 For every additional height of 2.5 M (10.5m -13m) 46 Supplying and fixing Shade Net (Green Net) for under construction of high rise building M-0298 47 FINISHING WORK 48 Special ceiling plastering and finishing all RCC exposed surfaces such as RCC slabs, sunshades, canopies, stair case steps, landing slabs etc with CM 1:3 (One cement and three sand) 10mm thick including hacking the surfaces and providing necessary CM nosing, beading as per size specified wherever necessary using the same mix etc., complete complying with standard specification and as directed by the Departmental Officer.S.I. 309--TNBP No. 55& 56 49 Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications 50 Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) 51 Supply and laying with best quality the following materials of Machine Polished granite slabof 18 mm thick (Fine Polished Steel Grey Granite Slab) including cuttingand edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing,cleaning, acid wash over finished surface, protection with Gypsum / Poplayeroverplastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 52 Polishing and Nosing the Granite Slab To Half Edge to round shape and finishing the surface neatly etc. complete complying with standard specification as directed by department officers 53 JOINERIES 54 ABS DOOR / EQUIVALENT Specification:Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work. Design Pre-laminated Door 55 Providing and fixing 35mm thick Factory made Prelaminated ABS (Acrolynitrile Butadyne Styrene) Sliding Door shutter moulded ofdifferent designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32x 32mm - 2 nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with prelaminated ABS sheetthickness of1.5mm .PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges-3 nos for each shutter, D SS pull handle 200 mm on both sides and SS tower bolt on one side with ISI makecomplete for finished item of work, complete complying with the standard specification.The door shall be shall move with dicast zamak rollers with ball bearings fixed over the powder coated aluminium sliding track of 2.40m length and bearing capacityof 60/80 kg.Adjustable end stop, floor guide andtwo way entry hanger bracket with locking arrangements shall be provided. Rate including all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging,fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 56 Flush doors : Supplying and fixing single leaf flush door 32/30mm thickness poth side commercial ply and approved brand Century/ Merino/ Greenlam with T.W.frames of size 100x75mm at side verticals and top, 6Nos.of iron hold fast fixed in C.C.1:2:4 and 3Nos.of butt hinges 125mm long including wind appliances furniture iron fittings 2Nos.of iron pad lock 15cm long for locking arrangements and fixed in position as directed during execution.(ISI STD) Rate as per GCC 2023-2024 - Building 57 Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile arereinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also itoperates as handle.The corners and joints should bewelded and cleaned.Radiations free pin headed plain or rown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action,security protective hinges, strong lockingsystems and asper size for arresting noise and energy loss.The connecting mechanism between sash and outer frame that enables opening of the window.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on wor 58 Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profilethe size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles arereinforcedwith GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of2mm.The EPDM rubber (black colour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers.The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on wor 59 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 60 Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Executive Engineer before use on work 61 Providing Ceramic tiles of size 305 x 305 x 6mm flooring approved make and quality with plain/colourwith base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., 62 Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading,the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. 63 Painting the new plastered walls with two coats for Interior Plastic Emulsion paint approved quality and colour over a priming coat, with two coats of wall putty including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 64 Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 65 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete 66 Supplying And Fixing Rubber Moulded Interlocking Blocks Against Available Edge Restraints 80 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To- Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (MSand)). 67 Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges et 68 Curtain Wall Glazing System 69 Structural Glazing (Curtain wall Glazing System) : Supply and fixing of (curtain wall Glazing System) having main framework of mullions and transoms made out of (64mm x 57mm x 2mm) sections for frame work designed extruded. Aluminum section should be Black colour anodized with 50 micron, mullion fixed to the beam / Column through adequately designed MS Anchor brackets expansion fasteners as required. System design to strictly considered for thermal movement, air infiltration, water preparation, seismic movement and structural movement including 6mm ST 167 Reflective Glass+1.52 PVB+6mm Clear Laminated Toughened Glass, MS Support Work with necessary 70 Smooth Finish Cement Texture + Archi Concrete + Base Coat Texture +Top Coat Design Texture + Standing and Smoothing + Warter Base Pu Coating 71 Supplying of locally made teracotta machine pressed wall cladding (Size: 230x75x16mm) & installation of the same with Sait-Gobain (Weber) make tile adhesive and sandbased grout at 10 mm spacing. 72 Supply & Fixing of Handrail using Modular Glass Railing System for Top & Bottom, 6mm Clear+1.52 PVB+6mm Clear Laminated Toughened Glass Polish with necessary accessories. 73 PLUMBING & SANITARY WORKS 74 Providing & fixing PVC RAIN WATER DOWNFALL PIPE of 110mm dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps,screws nailsetc.,complete complyingwithstandardspecification.Therateis inclusive of cost of removable iron gratings of appropriatesize.ThesizeofTeakWoodplugsusedis 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of U clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm] 75 Supply of 5000 ltrs Pvc Sintex water tankincluding cost of materials , conveyance and fixing charges etc., 76 Water supply work 77 InternalWaterSupply-CP.V.C.Pipes(6Kg/SqCm) SupplyinglayingandjointingP.V.Cpipes(6Kg/SqCm) of approvedqualityandbestvarietyconformingtoI.S.S& withI.S.Imark,ofthefollowingsizesincludingcutting, FixingtoPVCspecials usingAdhesivebutexcludingcost ofsuchspecialsandfixingtowallwithnecessaryteak- Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantledportions to original conditionwith necessary brick work and plastering wherever necessary with necessaryscaffolding charges. 78 20mm dia 79 25mm dia 80 32mm dia 81 Supplying & fixing in position first quality & approved variety of 50mm dia C.P.V.C BallValves ( Heavy type ) withI.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading ofPipes etc., complete complying with standardspecifications for both internal & external water supply arrangements. 82 25mm dia 83 32mm dia 84 INTERNAL & EXTERNAL SEWAGE WORK 85 SupplyingandfixinginpositionbestqualityP.V.Csoil/ wastepipes (6KSC) ofvarious sizeshaving ISImark and providingleakproofjointsincluding fixingtothewall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings,dismandlingmasonry/R.C.C.works wherevernecessaryandmakinggoodthedismandled portiontotheoriginalcondition,complyingwith standard specifications. 86 75mm dia 87 110mm dia 88 TOILET FITTINGS 89 Supplyingandfixinginpositionbestqualityapproved makewhiteglazedearthenwarewashhand basinof size 550 X 400 mm with a pair of cast iron brackets, including costof 15mm diametre brasschromium plated piller tape,32 mm diametreC.P. Waste union, 32 mm diametre P.V.C.waste pipe with rubber plugand chain,15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basininthewallinpositionwithapairofC.I.brackets withteakwoodplugsandscrewsandgivingnecessary water supply connection and paintiung the brackets with twocoatsofpaintoveraprimimgcoatofanticorrosive paintincludingtestingforleackageetc.,complete complying with standard specifications 90 Fabricating, Supplying, installing and testing best quality approved / equivalent make of stainless steel sink of size 600x600x200mm made using 2.00mm thick stainless steel sheet 304 grade. The sink is to be fixed over a concrete platform. Sink is to be fitted with 32mm dia CP waste coupling, 32mm dia heavy duty waste hose with extension pipe, 3 no of long body 15mm CP screw down Tap, CP inlet connection tube , CP wall flange, including necessary brackets etc complete complying with standard specification and as directed by the Department officers. 91 Supplyingandfixinginpositionindianmakebewelled edgemirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugsetc.,completecomplyingwithstandard specifications 92 Supplying and fixing best approved quality C.P.Soap Tray ofsize150mmX100mmincludingcostofTeak Woodplugs,brassscrewscompletecomplyingwith standardspecifications. 93 Supplying and fixingbest approved quality Brass C.P / Al anodisedTowelrail600mm.longand20mmDiameter withbracketsofsamematerialincludingcostofTeak- Wood plugs and C.P.Screws etc., complete complying with standard specifications 94 Supplingandfixinginposition 15mmdiameterbrass/ C.Pscrewdowntap/pillartap/swannecktap(heavy duty)ofapprovedmakeconformingtoI.S.specifications and quality including cost of shellac, thread etc.complying withstandardspecificationsandincludingcuttingand threading wherever necessary. C.P screw down tap 95 Supply and fixing in position whiteEuropean Water Closet of approved make with Porcelain low level flushing tank 12.5 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directedby the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works. 96 Supplyingandfixingthebestqualityapprovedmakeof bip cock with C.P. health faucet wall hook one metre long flexible tube, angle cock with wall flange including cutting and making good the walls wherever required etc.complete,complyingwithstandardspecificationand as directedbytheDepartmentofficers.Thequalityand make of health faucet should be got approved by Executive Engineer before use on work. 97 Supplying and fixing of White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mmwith all accessories such as 32mm dia Bell Mouth PVC Connection,15mmdiaGMWheelValue,15mmdia‘B’ Class GI WasteWater Pipe, 15mm diaNylon Connection, 15mm dia Brass Nipple etc. 98 Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings- 100 mm x 75 mm including all charges etc, complete as per standard specification. 99 Supplying & fixing in position 150 X 100 mm square mouth P or S trap stone ware Gully trap A gradewith cast iron double gratings of size 150 X 150 mmwith C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineerbefore use on works ). 100 Constructing brick masonry manhole with second sort Solid Blocks in CM 1:5 (one of cement, Msand) including earthwork excavation and sand filling for a depth of 150mm top cover slab with CC 1:2:4 (one of cement, two of sand, four of graded aggregate)20mm nominal size for fixing C.I Frame, including shuttering, reinforcement foundation concrete 1:4:8 (one of cement, four of sand, eight of graded aggregate 40mm nominal size) 100mm tk., plastering inner, outer and other exposed surface with 15mm tk., cement mortar 1:3 (one of cement, three of sand) and finishing with a floating coat of neat cement with water proofing compound as per specification, making channelsin CC 1:2:4 (one of cement, two of sand, four of graded aggregate) neatly finished including fixing C.I. Cover and frame, C.I. Rungs etc., complete complying to standard specification. 101 Supply and fixing RCC precast slab manhole cover SFRC of 50mm thick and required size 900mm x 900mm made in CM 1:3 Ratio both direction including cost and conveyance of all materials, labour and transportation etc complete complying with standard specification. 102 BORE WELL 103 Drilling of 12 dia vertical borewell so as to have a finished size of 6 dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractors rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shownincluding construction of mud pit etc. using only calyx rigs. 104 300mm (As per Twad Schedule Item No: 14f, P.No: 306) 105 150mm / 165mm (As per Twad Schedule Item No: 14a, P.No: 305) 106 Reaming 140/150 mm dia pilot bore to 300mm dia bore as directed by the TWAD Board Officer. 107 Upto 60 m depth ending below ground level 108 Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992 ( 1.1 (4,6,3), P.No: 22, Twad 109 200 mm dia CS 110 200 mm dia RS 111 150 mm dia RS 112 Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers. ( As per S.item no: 13a , p.no: 201) 113 200 mm dia CS 114 200 mm dia RS 115 150 mm dia RS 116 Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock. upto 30m rock level 117 Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directedand conducting yield test by V notch method. 118 Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge. 119 Supply ,erection and testing & commisioning of 2HP submersible pumpset in theOpen borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge. 120 Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trailrun for 10 days. (TWAD 17C) 121 Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO)Standards with following accessories.(a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (withMedia Pubble and Fine Sand and Activated Carbon Filling) set(c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic(USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No.& Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., LowPressure Switch - 1 No., Level Switch - 1 No. & NecessaryCPVC Pipes and Fittings.The system shall be provide with Two Panel Control Systemwith necessary Stainless Valves and Fittings and Float Controletc. The rate should be inclusive of all civil works, wherevernecessary to install the System in position and intact. 122 250 Ltr (M-0721) 123 Construction of Modular type RWH Structure capacity of 4.32 cu.m by usinginfiltration modules of size 800 x 800 x 360 mm and side wall with infiltration modules of size 800 x 360 x 25 mm includingearthwork excavation in bitumen/concrete roads to a size of 1200 x 1200 x 3000 mm and providing base plate, Geo - textile 400mm - 200 micron, Fine filter media 12mm thickness, Coarse filter media 20mm thickness, FRP of 700x700mm (clear opening 600x600mm) (Grating cover with Frame - Medium duty 10 MT), including all labour charges, carting away and drilling bore well 150mm dia upto a depth of 3m with 125mm dia Blue slotted PVC Pipe., complete. (Model 6) 124 INTERIORS & FURNITURES 125 Lending Counter with Side Table - F/installing in place Lending Counter of 600mm wide top with Side table storage of 450mm wide top, the table top, side verticals, midshelves and front panel of side table made of 19mm thk. HDHMR sheet. The front panel of the lending counter of height 1050mm is made of double-skin 19mm thk. HDHMR sheet cut to shape as per design. The table edges are finished with 6mm thk. matching pine wood beading with rounded edges. The table front, top, side surfaces and storage shutter fronts are finished with PU Matt polish of approved shade. The table and storage internal surfaces are finished with 0.8mm laminate of approved shade and make and inner edges finished with matching 2mm edgeband. 8mm thk. Lacquered glass (2.1m x 0.6m) - Saint Gobain make - of approved shade is fixed on top of table. The table size is 2.1x0.6x0.75m & 1.0x0.45x0.75m (as per Architects drawing) 126 Librarian Table with Side Table - F/installing in place Librarian table of 600mm wide top with Side table of 600mm wide top, the table top, side verticals, midshelves and front panels made of 19mm thk. BWR ply. The table front, top, side surfaces and storage shutter fronts are finished with 4mm Veneer of approved shade and make on all sides. The outer edges are finished with 6mm thk. pine wood beading with rounded edges. The table and storage internal surfaces are finished with 0.8mm laminate of approved shade and make and inner edges finished with matching 2mm edgeband. The veneer and wooden beading surfaces are finished with PU Matt polish of approved shade and make. 8mm thk. Lacquered glass (2.1m x 0.6m) - Saint Gobain make - of approved shade is fixed on top of table. The table size is 2.1x0.6x0.75m & 1.2x0.6x0.75m (as per Architects drawing) 127 Magazine Rack (400mm dia) - F/installing in place magazine rack, 200mm ht. hollow base and 650mm ht. hollow top with 2.40m ht. open storage in the middle. The hollow top and base made of 15mm thk. MS round pipe framework fitted with 5mm thk. MS round plate on top and bottom and covered with 3mm thk. MS sheet skin on all round. The open storage is made of 15mm thk. MS round pipe framework covered with 3mm thk. MS sheet skin on all round with cut-outs as per designand fitted with 5mm thk. MS round plate midshelves at heights as per design. The hollow top & base and middle open storage are all welded together in place and finished with powder-coated finish of approved shade. The metal edges to be properly sanded,smoothened and curved to avoid discomfort. The magazine rack size is 0.4 dia x 3.25m height (as per Architects drawing) 128 Open Box Storage type Wall Rack in Kids Seating (300mm depth) - F/installing Wall racks made of open storage boxes stacked on top of the other and secured in place with necessary adhesives and hardwares. The open storage boxes top, front, and side verticals fabricated out of 19mm thk. HDHMR sheet with 38mm thk. front fascia. with 9mm thk. HDHMR backsheet. The box edges are curved with 9mm thk HDHMR sheet with necessary wooden framework. The entire unit is finished with PU Matt polish of approved shade. The size of the boxes are 1.15x0.35x0.30m - 30nos and 1.30x0.35x0.30m - 15nos. 129 900mm x 300mm Depth Metal Wall Racks in Reading Area - S/installation of open Metal wall racks with horizontal mid-shelves in powder-coated finish of approved shade as per design. 130 1000mm x 300mm Depth Metal Wall Racks in Reading Area - S/installation of 2.1m height open Metal wall racks withhorizontal mid-shelves in powder-coated finish of approved shade as per design. 131 1150mm x 300mm Depth Metal Wall Racks in Reading Area - S/installation of 2.1m height open Metal wall racks withhorizontal mid-shelves in powder-coated finish of approved shade as per design. 132 1000mm x 450mm Depth Metal Wall Racks in Reading Area - S/installation of 2.1m height open Metal wall racks with vertical divider to access books from both sides of rack separately with horizontal mid-shelves in powder-coated finish of approved shade as per design. 133 Janitor Storage in Toilet Lobby (350mm depth & 2100mm height) - F/installation of janitor storage box made of 19mm thk. WPC sheet with 9mm thk. WPC sheet backing. The shutter and mid-shelves are made of 19mm thk. WPC sheet. The outer surfaces are finished with 1mm Laminate of approved shade and internal surfaces are finished with 0.8mm Laminate. The edges are finished with 2mm thk. matching edgeband with rounded edges. 134 PANELINGS & PARTITIONS 135 Feature Wall behind Lending Counter - S/installation of feature wall behind Lending counter made by providing 450mm dia perforations on existing brick wall at even spacing as per design. Clay pots are used to fill in the perforations at certain places as per design. Few perforations are used for fixing photographs with the help of 19mm thick BWR plywood backing for support. The balance perforations are left as it is. The entire feature wall surface including the clay pots is prepared with a layer of touch-up putty with necessary sanding and finished with 2 coats of Asian Paints make Royale emulsion of approved shade as per design. 136 Kids Seating with Levels in Reading Area - S/fixing in place the kids leveled seating of two levels 300mm and 600mm surrounded by 300mm deep x 650mm high support base for fixing open box book storages on the sides and back. The frames for the seating levels and surrounding storage support base are made with aluminum tubular sections 2 x 1 size and appx 1.5mm minimum wall thickness, vertical members at a spacing at 20 c/c except the end panels, where the spacing maybe less than 20 as per site condition. Horizontal members shall be fixed at top, bottom and middle. the curved wooden steps made from wooden framework as per design. The aluminum frames shall be tied in position by 1 1/2 X 1 1/2 X 2.5mm thick aluminum angles, cleats of 1 1/2 long and screwed with four screws per angle by CP metal pan headed screws. 2nos-1.2m dia x 0.45m deep cut-out is given on top of the 600mm seating level for recessed seating and sides covered with 19mm thk. HDHMR sheet. The top, front and sides of all the aluminium and wooden frame work is cladded with 19mm thick HDHMR sheet with 6mm thk, HDHMR sheet used for curved surfaces. The entire unit is finished with PU Matt polish of approved shade and color. Cost to include supply and installation of seating & back cushions (10nos) inshapes as per design made of 100mm thick PU foam and cladded with fabric of approved shaded as per Architects selection. 137 Terracotta Wall Tile Cladding in First Floor Reading Area - S/installing in locally made terracotta machine pressed wall cladding (size: 230x75x16mm) on existing rough plastered wall surface in pattern as per Architects design using Saint-Gobain (Weber) make tile adhesive and sandbased grout at 10mm spacing. 138 10mm Toughened Glass handrail - S/fixing in place 10mm toughened glass handrail - Saint Gobain make - with MS top rail as per detailed drawing and specifications including flats, plates, anchor fasteners required complete with necessary hardwares. 139 Fluted Glass Divider for Tables in Reading Area - S/installation of 10mm thk. Fluted glass divider with rounded edges on top fixed on table top with U clamp as per design. 140 CEILING & WALL FINISHES 141 Gypsum false ceiling - Supplying and erecting the false ceiling with gypsum board suspended to the ceiling with commercial GI sections and suspenders as per the manufacturer’s specification and procedure metal expansion fasteners to be used for fixing soffit cleat to roof slab or beams at a distance of not exceeding 1220mm C/C. Main channel spacing at a maximum distance of 1220mm C/C max with soffit cleat. Perimeter channel fixed to ceiling section at 457mm C/C (max) to the above frame work, fixing one layer ofSaint Gobain make 12.5 gypsum board screw fixed to the underside of the suspension grid, tapered edge board tapered edge boards tapered fibre tape and filled to give a smooth seamless ceiling all as per manufacturer’s specification and procedure complete. 142 True / Gypsum False ceiling painting - Preparing the ceiling surface with necessary scraping and application of 2 coat putty, 1 coat primer and 2 coats of finishing premium emulsion paint - Asian Paints make - to achieve a smooth painted surface. 143 Ceiling Mural in Mezzanine Floor - Providing a ceiling mural of selected design in Royale emulsion paint finish - Asian Paints make - on Mezzanine floor false ceiling as per design. 144 Wall painting - Preparing the walls with necessary preparatory works including application of 2 coat putty, 1 coat primer and 2 coats of finishing Royale emulsion paint - Asian Paints make - to achieve a smooth painted surface. 145 Wall painting - Preparing the walls with necessary preparatory works including application of 2 coat putty, 1 coat primer and 2 coats of finishing Royale enamel paint - Asian Paints make - to achieve a smooth painted surface for application of wallpaper. 146 Wooden Rafter False Ceiling above Lending Counter in Ground floor Entrance Area - S/installation of wooden rafter ceiling above Lending counter the rafters made of 50mm x 100mm ht. Aluminium pipes cut and finished to shape in wooden powder coated finish as per design and fixed to the base made of 19mm thk. Ply suspended from the true ceiling with commercial GI sections and suspenders as per the manufacturers specification and procedure metal expansion fasteners to be used for fixing soffit cleat to roof slab or beams at a distance of not exceeding 1220mm C/C. Main channel spacing at a maximum distance of 1220mm C/C max with soffit cleat. Perimeter channel fixed to ceiling section at 457mm C/C (max) to the above frame work. The Wooden ceiling is finished with 1mm Laminate of approved shade and make to match the aluminium rafters. 147 Wooden Rafter False Ceiling above Reading Area in First floor - S/installation of wooden rafter ceiling above Reading area, the rafters made of 50mm x 100mm ht. Aluminium pipes cut and finished to shape in wooden powder coated finish as per design and fixed at an angle with even spacing to the base made of 19mm thk. Ply suspended from the true ceiling with commercial GI sections and suspenders as per the manufacturers specification and procedure metal expansion fasteners to be used for fixing soffit cleat to roof slab or beams at a distance of not exceeding 1220mm C/C. Main channel spacing at a maximum distance of 1220mm C/C max with soffit cleat. Perimeter channel fixed to ceiling section at 457mm C/C (max) to the above frame work. The Wooden ceiling is finished with 1mm Laminate of approved shade and make to match the aluminium rafters. 148 Wooden False Ceiling for Stretch Ceiling in Reading Area - S/installation of wooden false ceiling suspended with commercial GI sections and suspenders as per the manufacturers specification and procedure metal expansion fasteners to be used for fixing soffit cleat to roof slab or beams at a distance of not exceeding 1220mm C/C. Main channel spacing at a maximum distance of 1220mm C/C max with soffit cleat. Perimeter channel fixed to ceiling section at 457mm C/C (max) to the above frame work, fixing one layer of 19mm thk BWR ply screw fixed to the underside of the suspension grid. Another layer of 6mm thk HDF is fixed over the plywood layer. The HDF surface is finished in premium emulsion paint finish - Asian Paints make - after putty and necessary surface preparation works. Proper supports to be given to handle fixing of Stretch False ceiling as shown in design fitted over the wooden false ceiling with necessary hardwares. 149 Stretch Ceiling in Reading Area - S/installation of Stretch Ceiling of Iceil / Euroceil / Equivalent make with white translucent film 75%stretched over Metal framework custom shape as shown in design suspended from wooden false ceiling. It shall consist of custom made Stretch false ceiling to fit exact dimensions with aluminium supports. The ceiling must be stretched and hooked into aluminium rails. Aluminium rails insuring good rigidityto be fixed to the wooden false ceiling at the specified level. The stretch ceiling to have Non-flammable fabric EURO CLASS B-S2 d0 in the European classification of reaction to fire with 10 years warranty. It shall include supply and installation of Neutral White Philips LED lighting with compatible LED driver and wiring in the stretch ceiling box. The lights to be placed in such a manner that no dark patch appears or zebra pattern appears. Once lights are installed stretch ceiling to give uniform output with required lux levels as per Architect. Rates shall be inclusive of installation of stretch ceiling and LED lights by companys installers. Rates shall also include the cost of transportation of materials and also the travellinghalting and all other misc. expenses of companys certified installer. 150 Pelmet for Blinds & ACs in Laminate finish - Supply and fabrication of 150mm high pelmets for blinds and 300mm high pelmets for AC units made of 19mm BWR ply to size and shape as per design. The pelmet is finished with 1mm thk. Laminate of approved shade and make on the exposed sides and edges finished with 2mm thk. matching edgeband. 151 Wallpaper in First floor Reading Area - S/installation of designer wallpaper of selected design in smooth finish - Asian Paints or Equivalent make - on wall surface after required surface preparations with necessary adhesives as per design. 152 DOORS 153 12mm Toughened Glass Door embedded in MS Frame ( 1.0m x 2.4m - 1no ) - P/fixing of single pane 12mm toughened glass door - of Saint Gobain make - embeded in 50mm x 50mm MS powder-coated frames of approved shade in Geze or equivalent make complete with necessary fittings - floor spring, door closer, 600mm ht. H-handle, locks etc. of Geze / Ozone / Dorma XLC make. 154 12mm Toughened Glass Door embedded in MS Frame ( 1.50m x 2.4m - 3nos ) - P/fixing of double pane 12mm toughened glass door - of Saint Gobain make - embeded in 50mm x 50mm MS powder-coated frames of approved shade in Geze or equivalent make complete with necessary fittings - floor spring, door closer, 600mm ht. H-handle, locks etc. of Geze / Ozone / Dorma XLC make. 155 12mm Toughened Glass Door embedded in MS Frame ( 1.80m x 2.4m - 3nos ) - P/fixing of double pane 12mm toughened glass door - of Saint Gobain make - embeded in 50mm x 50mm MS powder-coated frames of approved shade in Geze or equivalent make complete with necessary fittings - floor spring, door closer, 600mm ht. H-handle, locks etc. of Geze / Ozone / Dorma XLC make. 156 WPC Door with Vision panel ( 1.0m x 2.4m - 1no ) - P/fixing of 100x45mm Cellular hollow WPC door frame with rebate of 37mm paintedwith color of approved shade. The frame shall have 9mm deep groove for front architrave fixing. Outer layer of Cellular frame shall be 5mm thick and other 2 layer shall be of 4mm thickness. The front architrave shall be of 45 x 18mm hollow WPC section painted with color of approved shade. 30 x 12mm rear architrave, having width of 30mm and thickness of 12mm painted with color of approved shade. The frame and architraves shall be supplied in 3 parts as per customized size assembled with miter joint. The door frame having material density of 990kg/m3 (IS 2380 - part 3), shore hardness (D) of 62 (ASTM D2240), Moisture content less than 0.01% and water absorption of less than equal to 0.2% (IS 2380 - part 16). Providing 32mm shutters, all four edges of shutter shall be made of 55mm dried Pinewood frame. The frame to be fixed using PU foam and anchor fastners and requisite hardware. The complete shutter finished in paint finish of approved shade. The shutter to be fixed on the frame with necessary hardware fittings incl. hinges, locks, handles, floor spring and Door closer with standard arm of Hettich / Ebco / equivalent make. 157 LOOSE FURNITURE (cost to include installation charges) 158 Table with Metal Legs in Ground & First Floor Reading Area - Supply and installation of Wooden table, 38mm thk. Top made of doubly pressed 19mm thk. BWR ply and finished with 3mm Veneer of approved shade and make. The edges to be finished with 6mm thk. wooden beading with rounded edges. The table top is finished with duco Matt polish of approved shade and color. Metal legsfabricated of 50x25mm and 100x25mm MS frames to match design as per drawing and finished with powder-coated finish of approved shade as per design. The legs are fixed at the ends of the table top as per drawing. 159 1500mm (L) x 1050mm (D) 4 Seater Table 160 1500mm (L) x 1200mm (D) 4 Seater Table 161 750mm (L) x 1050mm (D) 2 Seater Table 162 Table with Metal Legs in Reading Area. 2dia Wire manager to be provided on top - Supply and installation of Wooden table, 38mm thk. Top made of doubly pressed 19mm thk. BWR ply and finished with 3mm Veneer of approved shade and make. The edges to be finished with 6mm thk. wooden beading with rounded edges. The table top is finished with duco Matt polish of approved shade and color. Metal legsfabricated of 50x25mm and 100x25mm MS frames to match design as per drawing and finished with powder-coated finish of approved shade as per design. The legs are fixed at the ends of the table top as per drawing. 2 dia ss wire manager - required nos provided on top as per drawing. 163 2000mm (L) x 1200mm (D) 4 Seater Table 164 1000mm (L) x 1050mm (D) 2 Seater Table 165 Medium-back Mesh Office Chairs - Supply amd installation of Medium backmesh chairs with Gas lift, Synchro tilt mechanism and foam cusion seating installation complete. The backrest, handles, seat frame and mesh to be in white color and the seat cushion to be in Grey color of approved shade as per design. 166 Round Pouff Chairs near Metal Racks - Supply and installation of round pouff seating in all floors of 450mm dia and 450mm height as per drawing with metal frames and PU molded cushion upholstered with 2 foam and fabric of approved texture, shade and color. 167 2-Seater Medium-back Sofa with Metal Legs in Reception Area - Supply and installation of medium-back 2seater sofa with cushion handrest and metal legs near ground floor Lending counter with 40 density foam for handrest, back and seat of size and design as per drawing and finished with fabric of approved texture, shade and color as per design. Basic cost of fabric Rs.150-200 per metre. MS legs in shape as per drawing and in black powder coated finish are provided as per design. 168 BOUGHT-OUT ITEMS (cost to include installation charges) 169 Mosquito Catcher - Supply and installation of 240W wall / floor mount corded commercial electric flying insect killer machine with catchment tray. 170 Assorted Wall Paintings - Supply and installation of decorative artwork printed in canvas / high quality thick premium glossy photo paper and encased in wooden frames of approved design, shade and color with 4mm thick glass in front of artwork as per design. 171 Photo Frames behind Lending Counter - Supply and installation of photos of tamil leaders printed in high quality thick premium glossy photo paper and encased in wooden frames of approved design, shade and color with 4mm thick glass in front of photos as per design. 172 Entrance Floor Mat - Supply and sinstallation of 2m x 1m Floor mat for the front entrance area on the floor. 173 Water dispenser - Supply, installation, and commissioning of Blue Star, model no.BWD3FMRGA or equivalent, hot ,normal & cold dispenser machine with refridgerator bottled water dispenser of 20L capacity with drip tray and other necessary accessories. 174 Wall Clock - Supply and fixing of wall mounted round/square Analog clockof approved design. 175 FIRE FIGHTING ARRANGEMENTS 176 Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent) 177 Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers 178 FIRE SAFETY 179 First Aid Box complete with all First Aid Medicines 180 Shock Treatment Chart fixed in glass frame 181 Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms 182 Danger Board as required by the Electrical Authorities 183 2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS(5 set) 184 Hand Gloves 11KV Grade 185 Earth Discharge Rod 186 Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers 187 Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT 188 Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT /SAFETY FIRST / EQUIVALENT 189 FIRE ALARM 190 Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply ,consisting 230/24 volt SMPS unit, 2Nos.of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. 191 Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard method sand as directed by the Departmental Officers.(Make: Ravel / Equivalent) 192 Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent) 193 Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers. 194 ELELCTRICAL WORKS 195 LT CT TNEB METER BOX: 196 CT Metering Panel - Supply, installation, testing and commisioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS channels, fasteners, etc., including all associated control wiring. 1set of 200/5A CT with TNEB Metering provision and 1nos of 200/5A CT for APFCR 197 250A Isolator Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of 250A TPN MCCB panel, cubicle type, Free standing, floor mounted, single front,14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, 198 MAIN LT PANEL: 199 Supply, Installation, testing and commissioning of 3Phase, 415Volts, Main LT Panel board of Indoor, Cubicle floor mounting type made out of 2mm thick CRCA Sheet with powder coated finishing, MS base frame, double internal earthing arrangements, 200Amps, rating TPN Copper busbars with interconnection busbar, etc., comprising of the followings:EB Incomer :1 No. 200Amps, 25kA, 4Pole, Thermal magnetic MCCB with Ext.RHOMMetering : 1 Set of RYB LED Indication lamps1 Nos. of Multifunction Meter with RS 4851 Set of Current Tranformers (200/5A, Cl-1), 1 No. 200/5A CT Outgoings: 2 Nos. 100A, 25kA, TP+N, TM MCCB with Ext. RHOM (APFCR & Spare)5 Nos. 63A, 25kA, TP+N, TM MCCB with Ext. RHOM (PDB-1,2&3, INVERTER & Spare)4 Nos. 32Amps DP MCBs (LDB-1,2&3 & SPARE) 200 APFC Panel: Supply, installation, testing and commissioning of 40 KVAR Automatic power factor correction panel ( APFC ) with 8 steps of capacitor switching cubicle type, free standing, Powder coated, 14 SWG CRCA sheet steel,enclosed separate compartment for each capacitor, front operated, indoor type dust and vermin proof, hinged, lockable doors, electrolytic grade aluminium bus bars, with SMC /DMC insulator supports, Digital volt meter, Ammeter with selector switch, 8 stage Digital Automatic power factor correction,( APFC ), Auto / Manual selector switch, cluster LED typeindicators, in the incomer,complete with electrolytic grade aluminium bus bars, MPP type Power capacitors, with 10 KVAR x 3 nos.5 KVAR x 1 no. 2 KVAR x 2 nos. 1 KVAR x 1no. Contactors, MCCB’s, start, stop, push buttons, internal wiring, colour coding, ferrules, cable gland plates, Aluminium earth bus for the entire length of the panel with bonding to earth and painting,Panel mounting MS Channels, fasteners, etc., including all associated control wiring and interlocking circuitry, MV panel sensing CT interconnecting wiring etc.,andAPFC Panel Installation, Testing , Commissioning and Transport Charges all inclusive. 201 Supply and fixing of 7 segment6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic doorcover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. withthe following on wall with earth connection only.i.63A 4P MCB- 1 no. ii.63A 4P 30MA RCCB/ELCB - 1 no. iii.63A DP MCB Isolator -3 nos. iv.6A to 32A SP MCB - 18 nos. 202 Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCBswitch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wallwith earth connection only.Higher End 203 Supply and Laying of 3 1/2x 120 sq.mm. PVC armoured LTUG cablein suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. 204 Supply and layingof 2 x 6 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting0.15metrelayerofsandand coveringthe cablecompletely withbricksandsandandrefillingtheearthto make good 205 Supply and Clamping of 3 1/2 core x 120 Sq.mm PVC armoured LTUGaluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. 206 Supply and Clamping of 3 1/2 core x 35 Sq.mm PVC armoured LTUGaluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. 207 Supply and Clamping of 3 1/2 core x 25 Sq.mm PVC armoured LTUGaluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. 208 Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection 209 Supply and fixing of brass cable gland for 3-1/2 x 35 sq.mm. PVC armoured LTUG cable with earth connection 210 Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection 211 Supply and fixing of brass cable gland for 2 x 6 sq.mm. PVC LTUG armoured cable with earth connection 212 Supply and providing cable end termination of 3-1/2 x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 213 Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 214 Supply and providing cable end termination of 3-1/2 x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete 215 Supply and Run of 4 of 10 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigidpipe concealed inwall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. 216 Supply and Run of 2 of 6 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigidpipe on wall and ceiling with continuous earth wire connection by 6 sq.mm. PVC insulated SC unsheathed FRLS copperwire with painting of suitable colour. 217 Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion 218 Wiring with 2 x1.5 sq.mm.PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigidpipe on wall and ceiling and switch dropportion PVC rigid pipe concealed in wall with PVC accessories with Module GI switch boxin flush wall with 6A one way module switch with module front plate withcontinuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colourforOpen PVCLight point / fan point (for electronic regulator) ( 6 points / Coil)Higher End - PRIMARY POINTS 219 Wiring with 2 x1.5 sq.mm.PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigidpipe on wall and ceiling and switch dropportion PVC rigid pipe concealed in wall with PVCaccessories with Module GI switch boxin flush wall with 6A one way module switch with module front plate withcontinuous earth wire connection of 1.5 sq.mm copper wire with painting of Suitable colourforOpen PVCLight point / fan point (for electronic regulator) ( 6 points / Coil)Higher End - SECONDARY POINTS 220 Wiring with 3 x1.5 sq.mm.PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigidpipe Concealed in wall and ceiling with PVCaccessories with ModuleGI switch box in flush with wall with 6A two way module switch with module front plate withcontinuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colourfor ConcealedPVC pipe Stair case Light pointHigher End 221 Wiring with 2Rx1.5 sq.mm. (22/0.3) PVC insulated Single core unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 1no. 6A one way module switch and 1no. 6A 3/2 Pin module socket with module front plate with continuous earth wire connection of 1 run of 1.5 Sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Pipe 5A Plug Point ( 8 Points / Coil ) 222 Wiring with 2Rx4sq.mm PVC insulated Single core unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module Plastic switch box in flush with wall with 1no. 16A one way module switch and 1no. 16A 3/2 Pin module socket with module front plate with continuous earth wire connection of 4.0Sq.mm copper wire and making good of the concealed portion with painting ofsuitable colourfor Concealed PVC Pipe 15A Power Plug Point ( 8 Points / Coil ) 223 Supply and fixing of 1 no.6A two module 5 pin socket , 1 no.6A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 224 Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos.6A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 225 Supply and fixing of 1 no.6/16A two modulesocket , 1 no.16A one module switch with module cover plate (plastic) onsuitable module concealedBox (GI ) in flush with wall with connections. Higher End 226 Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earthconnection (For AC Plug) 227 LED LIGHTINGS 228 Supply, fixing, testing & commissioning of 15W concealed mountingLEDCylindrical luminairewithDie-Cast Aluminium sheethousing withopal high transmission diffuserfixedinseparateDie-Cast Aluminiumsheet frame with operating voltage range (90 - 265V AC). LED driver efficiency should be greater than 83% with CRI greater than 80 and withcolourtemperature4000Krange.LEDhaving50,000 burning hours with minimum 80% lumen maintenance and power factor 0.90 with THD less than 20% & Surge protection 2.5kV. Systemconsumptionshouldbe15WLED fixture with lumen package of 2250 lumens. The luminaire shall be IP40 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: All Indoor luminaire shall have NABL certificate on Resistance to Flame & Ignition as per IS 10322 part-1 :2014. Make: K-Lite or Equivalent. 229 Supply, fixing, testing & commissioning of 15W Surface mountedLEDCylindrical luminairewithDie-Cast Aluminium sheethousing with Translucent Polystyrene diffuser fixed in separateDie-Cast Aluminium sheet frame with operating voltage range (90 - 265V AC). LED driver efficiency should be greater than 85% with CRI greater than 80 andwithcolourtemperature4000Krange.LEDhaving54,000 burning hours with minimum 85% lumen maintenance and power factor more than 0.90 with THD less than 10% & 2.5kV surge protection. System consumption should be 15W LED fixture with lumen package of 2000 lumens. The luminaire shall be IP40 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: All Indoor luminaire shall have NABL certificate on Resistance to Flame & Ignition as per IS 10322 part-1 :2014. Make: K-Lite or Equivalent. 230 Supply, fixing, testing & commissioning of 18W Surface mountedLEDCylindrical luminairewithDie-Cast Aluminium sheethousing with Translucent Polystyrene diffuser fixed in separateDie-Cast Aluminium sheet frame with operating voltage range (90 - 265V AC). LED driver efficiency should be greater than 85% with CRI greater than 80 andwithcolourtemperature4000Krange.LEDhaving54,000 burning hours with minimum 85% lumen maintenance and power factor more than 0.90 with THD less than 10% & 2.5kV surge protection. System consumption should be 18W LED fixture with lumen package of 3300 lumens. The luminaire shall be IP40 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: All Indoor luminaire shall have NABL certificate on Resistance to Flame & Ignition as per IS 10322 part-1 :2014. Make: K-Lite or Equivalent. 231 Supply, fixing, testing & commissioning of 12W surface mountingLEDCylindrical downlight luminairewithDie-Cast Aluminiumsheethousing withClear PolycarbonatediffuserfixedinseparateDie-Cast Aluminiumsheet frame with operating voltage range (100 - 265V AC). LED driver efficiency should be greater than 85% with CRI greater than 80 andwithcolourtemperature4000Krange.LEDhaving50,000 burning hours with minimum 85% lumen maintenance and power factor 0.90 with THD less than 20% & Surge protection 3kV.Systemconsumptionshouldbe12WLED fixture with lumen package of 1680 lumens. The luminaire shall be IP20 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: All Indoor luminaire shall have NABL certificate on Resistance to Flame & Ignition as per IS 10322 part-1 :2014. Make: Crompton, K-Lite, Ace or Equivalent. 232 Supply, fixing testing and commisioning of 20W Cloud shape designer pendant light in Warm white temp. as per Architects design given in Computer Section with operating voltage range (120 - 270V AC). LED driver efficiency should be greater than 85% with CRI greater than 80 andwithcolourtemperature3000Krange.LEDhaving50,000 burning hours with minimum 70% lumen maintenance and power factor 0.90 with THD less than 10% & UGR < 19 complaince to LG7guidelines. The luminaire shall be wired with PVC unsheathed copper leads from terminal to the fitting.(140 lm/W) Make: Crompton, Philips, Bajaj or Equivalent. 233 Supply, fixing, testing & commissioning of60W Linear Light [1.2 [12W]+1.2[12W]+6.1 [6W]+6.1 [6W]] combination Customized pre fixed Recatngular Linear light with Wooden JointsSuspended mountedLED luminairewith Extruded Aluminium body with Die-Cast Endcaps withpolycarbonate diffuser. LED driver efficiency should be greater than 85% with CRI greater than 80 andwithcolourtemperature4000Krange. LEDmore than 90% lumen maintenance and power factor more than 0.90 with THD less than 10%, Surge protection 3kV and UGR < 12. The luminaire shall be IP40 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: All Indoor luminaire shall have NABL certificate on Resistance to Flame & Ignition as per IS 10322 part-1 :2014. Make: K-Lite or Equivalent. 234 Supply, fixing, testing & commissioning of 9W In-ground LED luminaire with Die-Cast Aluminium housing with toughened clear diffuser and 316 grade Stainless steel front ring with operating voltage range (100 - 277V AC). LED driver efficiency should be greater than 85% with CRI greater than equal to 80 andwithcolourtemperature3000Krange.LEDhavingmore than 60,000 burning hours with minimum 70% lumen maintenance and power factor more than equal to 0.90 with THD less than 10% & Surge protection 2.5kV.Systemconsumptionshouldbe9WLED fixture with lumen package of 1350 lumens. The luminaire shall be IP67 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: Product should have Narrow beam, Moisture arrestor, IP 68 Connector for on site connections.Luminaire should have Anti Glare VisorHoneycomb assembly. Make: K-Lite or Equivalent. 235 Supply, fixing, testing & commissioning of 8W In-ground LED luminaire with Die-Cast Aluminium housing with clear toughened glass diffuser and 316 grade Stainless steel front ring with operating voltage range (150 - 270V AC). LED CRI greater than equal to 80 andwithcolourtemperature2700Krange.LEDhavingmore than 60,000 burning hours. The luminaire shall be IP67 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: Product should have Narrow beam, Moisture arrestor, IP 68 Connector for on site connections.Luminaire should have Anti Glare VisorHoneycomb assembly. Make: K-Lite or Equivalent. 236 Supply, fixing, testing & commissioning of Nebula Midi 12W Inground spike / Die-Cast Aluminium bracket mounted LEDcylindrical luminairewithDie-Cast Aluminiumalloy housing withclear toughened glass diffuser with operating voltage range (100 - 300V AC). LED driver efficiency should be greater than 80% with CRI greater than equal to 80 and with colour temperature 3000Krange. LED having power factor more than 0.95 with THD less than 10% & Surge protection 4kV.The luminaire shall be IP66 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Note: Product should have Moisture arrestor and IP 68 Connector for on site connections.Luminaire should have Anti Glare Visor + Honeycomb assembly. Make: K-Lite or Equivalent. 237 Supply, fixing, testing & commissioning of 6W / 2x6W Wall mountedLEDwall luminairewith Extruded & Die-Cast Aluminium body with clear toughened glass diffuser and Mirror finish pure Aluminium reflector. Operating voltage range (100 - 300V AC). LED driver efficiency should be greater than 80% with CRI greater than 80 andwithcolourtemperature3000Krange.LEDhaving power factor more than equal to 0.95 with THD less than 15% & Surge protection 4kV. The luminaire shall be IP65 rated and wired with PVC unsheathed copper leads from terminal to the fitting. Make: K-Lite or Equivalent. 238 Supply and fixing of 1200mm(48) sweep A ceiling fan - Havells make - complete with stepped electronic 300W regulator with 600mm down rod with fan clamp with side plates and cross arm of size 450mm(18) 239 Supply and fixing of 450mm (18) Wall mounting 5 star rated complete (Higher end) with necessary accessories and hardwares as required. 240 Supply and fixing of 300mm (12) sweep AC exhaust fan complete without provision of hole in the wall 241 Supply and fixing of louvers shutters arrangements for 300mm (12) sweep AC exhaust fan 242 Earthing as per the ISI specification with an earth electrode of 2.10 metre Class B GI pipe of dia not less than 40mm withcopperearthplateofsize125mmx50mmx6mmwithnecessaryfunnelingarrangementswithnecessary masonry work and with 38mm RCC cover slab for the brick masonry 243 Supply and erection of Copper plate earthing station with GI pipe, 600x600x3mm thick copper plate, salt, charcoal, etc., including civil works, heavy duty CI Cover, etc., as per IS 3043 standards 244 Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection 245 Supply and Run of1 of No.8 SWG copper wire for earth connection 246 Supply and Run of1 of No.8 SWG copper wire in suitable PVC rigid pipeon wall / floor / ground for earth connection 247 Supply and fixing of 10A 400V, 50 Hz 3 phase 4 wire watt hour meter on suitable TW box with earth connection 248 The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates,materials.The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fasteners, welding, anchor bolts, nuts etc.The rack shall have suitable cable clamping arrangements etc.Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements.The rate shall inclusive of necessary Wedge anchors threaded rods,nuts & bolts, making clamp for rcc roof fix/ perlin/Truss, cable tray clamps etc, (8 mm threaded rod supports shall be providedat not more than 2 mtr center to center and as per site requirement ) 249 Perforated type Supply and fixing ofGI Hot Dip / Powder Coated 16 SWG Cable Tray with 300 mm width and 50mm height 250 Perforated type Supply and fixing ofGI Hot Dip / Powder Coated 16 SWG Cable Tray with 150 mm width and 50mm height 251 Supplying and fabricating of MS structural steel supports for various applications using U channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above. 252 Supply and fixing ofRaceways Metal / GI with 150mm widthx 38mm heightwith Suitable Fixing bracket and Siutable Coupler Jiont with Connected all accessories complete work. 253 Construction of inspection chambers of following sizes 60 x 60 x 60cm with earth work excavation for foundation with 23cm thick brick jelly cement concrete bed in C.M.1:4:10 using 40mm Brick jelly for foundation, brick work in C.M.1:6 for chambers, plastering with C.M.1:3 12mm thick, benching, channelling, 75mm thick RCC loose slab covering in C.M.1:2:4 mix using 20mm blue granite jelly including necessary reinforcement, etc., complete . (GCC -2023-24, SCH No:718, P.No-45) 254 Supply,fixing and laying of Heavy duty PVC pipes complete buried in floor with joints and other accessories as required.110 mm dia, 2mm thick 255 Split Type AC UnitSupply, Installation, Testing and Commisioning of Wall mounted Split type Inverter 2.2 TR Air Conditioning Unit with supply and installation of necessary accessories including necessary length of copper pipes, suitable type double boost voltage stabilizer, pvc drain pipes, also includes necessary opening in the walls (if necessary) for the drain pipe routing, outdoor unit stand and all other required accessories for the 2.2TR split type AC unit. The quoted rate should be inclusive of materials, labour, wages, fixtures, transportation, installation, wasteages, Octroi, machinery, temporary works such as scaffolding, cleaning, overheads, profit, statutory expenses, incidental charges and all related expenses to complete the work. 256 5KVA UPSSupply, erection, testing and commissioning of the following rating of UPS Systems for emergency lightings. Supply of Micro Processor Controlled 5 KVA UPS andinput supply of 430 Volts ± 15%, 3 Phase, 50 Hz ± 5%and an out put of 230 Volts ±1%, 1 Phase 50 ± 0.01 Hzconsisting ofRectifier, Out put Isolation Transformer, Battery Circuit Breaker, Static and Manual Bypass Switches and all others accessories required as per detailed specification .The system should be suitable for independent mode of operation.Supply of Sealed Maintenance Free Batteries to support 5 KVA for 6 hrs complete with intercell connectors, battery stand made out of Powder Coated MS Angles with adequate supports to carry the load of the batteries as per specification.Installation,Testing and Commissioning of complete1 nos 5 KVA UPS system in Independent mode of operation with the battery bank including inter connection of UPS and battery banks with adequate size of copper cable, lugs etc. complete as required. 257 Supply and erection of 2mx1mRubberMatsuitablefor11KVinstallation confirming to IS (5 NOS) 258 Supply of First Aid Box complete with all First Aid Medicines 259 Supply and fixing of Shock Treatment chart with Glass frame 260 Supply and fixing of4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle 261 Supply and fixing of Fire Extinguishers Co2, 4.5Kg confirming to TAC norms 262 Supply and fixing of Danger Boards (415Volts & 230Volts) 263 XEROX MACHINE: Supply, installation, testing and commissioning of A3 Xerox 5855 Photocopier machine, Multi-function, Windows 11, laser printing with multiple features like Print, Scan, Copy, 2-sided ouput, Network connectivity, print speed upto 55 pages per minute, print resolution upto 4800x1200 dpi and paper capacity 46000 sheets (standard) / 8700 sheets (max with optional feeders) 264 DESKTOP PC: Supply, installation, testing and commissioning of Dell Inspiron 27 All-in-One Desktop PC of following specifications:1.Processor: Intel Core7 150U (12MB cache, 10 cores, 12 threads, upto 5.4 GHz Turbo)2. Operating System: Windows 11 Home Single Language, English3. Graphics Card: NVIDIA GeForce MX570A with 2GB GDDR6 graphics memory4. Monitor: 27, FHD 1920x1080, 60Hz, WVA, Touch, InfinityEdge, Narrow Border5. Memory: 16GB: 2 x 8GB, DDR4, 3200 MT/s6. Storage: 1TB M.2 PCle NVMe Solid State Drive7. Color: Pearl White Cover + Molded Speaker Grill (for Touch LCD)8. Microsoft Office: Microsoft Office Home and Student 20219. Security Software:McAfee LiveSafe 1-year (5-device)10. Keyboard: Dell Pro Wireless Keyboard and Mouse - Dell KM5221W White11. Wireless: Intel Wi-Fi 6E AX211, 2x2, 802.11ax, Bluetooth wireless card12. Power: 90W AC adapter, 4.5mm barrel 130W AC adapter 4.5mm barrel 265 PRINTER: Supply, installation, testing and commissioning of HP Smart Tank 790 WiFi All-in-One Printer Duplexer with ADF and Magic Touch Panel Inkjet Colour printer, print speed 11-20 sheets with multiple features like print, scan, copy, fax, multi-port connectivity (Hi-speed USB 2.0, Wifi, Bluetooth LE , 1 USB Host, LAN) , 2.4/5G dual band Wi-Fi, Wi-Fi Direct, mobile printing capability, etc 266 METAL SIGNAGE BOARDS: Supply and fixing of metal signages for the following:1. Mudhalvar Padaipagam text in Tamil of size 20 x 15with backlit LED placed over the base, fabricated using stainless steel sheet of minimum 16G thickness brush finish of required size and colour as required. 267 LOGO SIGNAGE BOARDS: Supply and fixing of acrylic signages for the following:1. Mudhalvar Padaipagam logo of size 2 x 22. CMDA logo of size 3 x 463. Directorate of Public Libraries logo of size 6 diawith backlit LED placed over the sun board base, SIDE EDGES(4): 5mm transparent white acrylic sheet with laser cut & 4inches manual raising all around with details. ACRYLIC SHEETS & ITS TECHNICAL PARAMETERS:Front: a. 5mm Imported (Mitsubishi/equivalent) acrylic cutting on laser cutting machine.b. Flexi bond make 25mm Sun board for the back of the logo. 268 CCTV SYSTEM 269 Supply, Installation, Testing and commissioning of 32 channel 2 SATA NVR, with 8TB Hard Disk Drive 2 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected,Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency,Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony. 270 Supply of 4MP, Internet Protocol fixed BULLET CAMERA/DOME CAMERA (INDOOR & OUTDOOR)with following specification:●1/2.5 Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection)● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied●On-board Storage -Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. with Camera Stand. (Make: Dahua/Panasonic) 271 Supply, Installation, Testing and Commissioning of 32 smart LED TV with following specifications a) Full HD 4K monitor b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remotep) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). 272 Supply and Clamping of CAT 6 unarmoured cable in suitable PVCPipe 1 thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem)i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATMii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant.Fire Rating: PVC : IEC 60332-1.iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylene v. Twisting - 2 Cores to the pairvi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm. 273 Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges. 274 Supply and fixing of POE 24 port switch with two uplink port, 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK) 275 Supply and fixing of POE 8 port switch10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK) 276 Supply and Fixing of Rack with Accessories -Higher end12u Rack with fan extra for the above rack. (speaker/data/cctv) 277 Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up andbattery stand. 278 Supply, Erection of 6mLengthpole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges. 279 Supply and Run of 3C X 2.5 sqmm insulated multistrandad flexible copper Trailing Flat/round cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with painting of suitable colour. 280 Supply, installation, testing, and commissioning of broadband WiFi connection with the following specifications: Networking Interface: (1) GbE RJ45 PortPower Method: PoE+, Pasive poE(48V)Max TX power: 5.0 GHzAntenna gain: 5.0 GHzMounting: Wall or Ceiling MountingWireless security: WPA-PSK, WPA-Enterprises (WPA/WPA2/WPA3)VLAN: 802.1QConcurrent Clients: 300+5G connectivity,300mbps speed, unlimited monthly data plan, 5G compatible router with wifi boosters provided at required areas. 281 PA SYSTEM 282 Supply, Installation,Testing & commisioning of 15W Wall Speaker 2 way high efficiency, high fidelity, long throw IP65 weather proof P.A Music Horn speaker. It combines the high efficiency of horn with wide frequency response.Music horn is weather protected and UV protected ABS plastic housing combines with the feature of easy poertap selection on a terminal strip with a two core cable.It has impedence of 250/500/1k/2k ohm with frequency response of 120-16000 hertz. (Make:AhujaAMH402T/Bosch or its equivalent) 283 Supply, Installation,Testing & commisioning of 480 watts P.A Booster Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 wattsRMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000/Bosch or its equivalent) 284 Supply, run, testing and commissioning of2Core x 1.5sq sqmm PVC insulated UnArmoured Speaker Cable in suitable 25mm dia Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour. 285 Supply & Installation of custom built M.S Powder coated wall mounting Audio rack (42U Rack) with Lock & key for housing of Amplifier & player/Recorder conforms to EIA-310,IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth.

BRR : 6703233 Appointment of an Event Management Agency on turnkey basis for Designing, Execution and Management/ Supervision of arrangements, activities and ancillary services for an Event being organized in conjunction with Republic Day Celebrations – 2025 at areas in front of Red Fort, Delhi (Gyan Path and two (2) adjoining lawns); 1 EntranceArchesmadeofmetalframewith fabric print 11mtr (W) x 4.5 mtr (H) duly finished as per design approved by ITDC/ Principal Organizer. 2 Entrance Arches made of metal frame with fabric print 6 mtr (W) x 4.5 mtr (H) duly finished as per design approved by ITDC/ Principal Organizer. 3 Help desk: Delhi Police, CCTV, Medical Room, Fire Control Room, Traffic police etc Waterproof Pagodas measuring 5 mtr x 5 mtr, Covered from all sides and top with lockable door for entry and exit having wooden platform base of 10 cm with new carpet (colour as per our requirement) 4 H/Desk - Octonorm Tables 3 ft x 1 .5ft 5 H/Desk· - Banquet chairs with chair covers 6 H/Desk - Power points 7 H/Desk · Dust bin 8 H/Desk - Facia 9 H/Desk - Adequate lighting (comprising of 3 light fittings of 40 Watt each or compatible LED Light Fittings in each pagoda) 10 Office set up of Concerned Ministries (Ministry of Tourism, Culture, Defence, ASI, Textile, Delhi Police,CPWD,ITDCetc.)Waterproof Pagodas measuring 5 mtr x 5 mtr , Covered from all sides and top with lockable door for entry and exithaving wooden platform base of 10 cm. with new carpet (colour as per our requirement) 11 Office setup - Octonorm Tables 3ft x 1.5ft 12 Office setup - Banquet chairs with chair covers 13 Office setup - Power points 14 Office setup - Dust bin 15 Office setup - Fascia 16 Office setup - Adequate lighting (comprising of 3 light fittings of 40 Watt each or compatible LED Light Fittings in each pagoda) 17 Office set up of Concerned Ministries ( Ministry of Road Transport,NECRT,MoEF&CC,Department of Post, Council of Architect, Ministry of Jal Shakti etc.)Water Proof Pagodas(10mtrx5mtr)Structureeachwith wooden platform base of 10 cm, carpet with each to have 12 light fittings of 40 watts each or compatibleLEDlightfittings,Furniture- OctonormTable3’x1.5’-08Nos,Banquet chairs with chair covers 8 nos, Power Points 08 Nos, Spot lights -15 Nos, Dustbin -02 No, etc. withModularstructureinside.EachModular structure within each theme Pavilion to have Presentable Almirah (all equal size) with lockable facility to be placed in each Central Ministry/ Department Pavilion pagoda and 1 No. fascia. Each Pavilion (10 mtr x 5 mtr ) to have additional average Electricity load of 6 KW for each pavilionincluding Electric load required from 22nd January,2025 for fabrication of stalls) 18 Office setup - Octonorm Tables 3ft x 1.5ft 19 Office setup - Banquet chairs with chair covers 20 Office setup - Power points 21 Office setup - Dust bin 22 Office setup - Fascia 23 Office setup - Adequate lighting (comprising of 3 light fittings of 40 Watt each or compatible LED Light Fittings in each pagoda) 24 Security Items / services - Baggage Scanning Machines(as per requirements of security agencies ) 25 Security Items / services – Door Frame Metal Detector at entry points (as per requirements of security agencies) with footfall counting device 26 Security Items/services -Manpowerfor Frisking, detection, security etc. arrangements by trained and uniformed, presentable security personnel (on shift basis of 12 Hours per day) at identified points and as required: - Male - 125 Nos. per day of event on shift basis in ( Day/Night) 27 Security Items / services - Manpower for Frisking, detection, security etc. arrangements by trained and uniformed, presentable security personnel (on shift basis of 12 Hours per day) at identified points and as required: - Female- 50 Nos per day of eventin Day Shift only 28 Bouncers for Dais / Stage arrangements by trained and uniformed, presentable security personnel (on shift basis of 12 Hours per day) required; - Female 10 Nos per day of the event in day shift only) Men 10 Nos per day of the Event. 29 Security Items / services - Queue managers (ribbonised steel barricading) ( as per requirements of security agencies ) 30 Security Items / services - Security Tower ( Machaan) ( as per requirements of security agencies ) 31 CULTURE STAGE REQUIREMENTStage set up measuring 72ft x 52 ft. of at least three different levels ( 6ft,7ft &8ft) covered with grey carpet; Stairs: one stair complete on front side; and two stairs 6 feet wide on right & left side is required.Risers: approx. 8 ft. x 16 ft. with 1½ ft. height suitable for 8 to 10 artists to sit with dari/Kaleen covered with white cloth and Frontal steps all along the width.RedCarpet coveringthefrontofthe stage up to Sofa sets seating rows. 32 CULTURE AREA INCLUDING Well Ventilated Green rooms of size of 625 sq. ft. each separate for male and female interconnected with cultural stage. The green rooms to accommodate 150 artists in each at a time in vicinity of stage area, with wooden platformof 10cm with carpet, 20 banquets chairs with covers each, Garments hanger stand- 5 Nos each, 6 mirrors each, 2 shelves each. Green Rooms to be well lit with 6 nos. each light fitting of 40 watt each or compatible LED light fittings. 33 CULTURE AREA INCLUDING - Holding areas of 10 mtrs x 5mtrs each for cultural artists at an area in the vicinity of the cultural stage with wooden platform of 10 cm, carpet, Banquet chairswithcovers-20nos.eachandlightfittings of 40 watt- 4 nos. each or compatible LED light fittings. 34 Cultural Area: Air-conditioned portable Toilets in vicinity of main cultural stage with dedicated staff deployment with toiletries, amenities and adequate water supply at all time of event. 35 CULTURE AREA INCLUDING – VIP ExecutiveHigh Back Chair for Dais 36 CULTURE AREA INCLUDING – Centre Tablefor Dais 37 CULTURE AREA INCLUDING – Podium withPodium Boards 38 CULTURE AREA INCLUDING - Seating foraudience:- Sofa Double Seaters 39 CULTURE AREA INCLUDING - Seating foraudience:- Centre Tables( Coffee Table size) 40 CULTURE AREA INCLUDING - Seating foraudience:- Banquet chairs with chair covers and bands 41 CULTURE AREA INCLUDING - StageLighting:- Box Truss( 1000mm) 80 ft x 60 ft 42 CULTURE AREA INCLUDING - StageLighting:- Centre beam 70 ft 43 CULTURE AREA INCLUDING - StageLighting:- Side Cuts Section – 16 ft 44 CULTURE AREA INCLUDING - StageLighting:- LED PAR LIGHTS 54 x 3 Watt 45 CULTURE AREA INCLUDING - StageLighting:- Par 64 sealed beam 46 CULTURE AREA INCLUDING - StageLighting:- Laser light 47 CULTURE AREA INCLUDING - StageLighting:- Sharpy 48 CULTURE AREA INCLUDING - StageLighting:- Pointy 49 CULTURE AREA INCLUDING - StageLighting:- Aura 50 CULTURE AREA INCLUDING - StageLighting:- Profile 51 CULTURE AREA INCLUDING - StageLighting:- Follow Spot 52 CULTURE AREA INCLUDING - StageLighting:- Mole fays 53 CULTURE AREA INCLUDING - StageLighting:- Haze Machine 54 CULTURE AREA INCLUDING - Stage Lighting:- Grand MA Lighting CONTROL Panel with NPU. 55 PC LED Warm-400 watts 56 LED Fresnel warm 57 Dimmer Par 500 KW Electronic 58 Avolite Board 59 Cultural Area -Video - LED WALL - Centre 52ft x 16ft 60 Cultural Area - Video - Side Wings – LED Wall3.5 ft x16ft 61 Cultural Area - Video - Watch out Servers 62 Cultural Area - Video - Plasma TV 52 inch on stand for backstage 63 Cultural Area - Multi Camera HD Set up with 04 cameras with editing table, Jimmy Jip with crane and adequate manpower to operate 64 Cultural Area - Sound Requirements - line array D and B 65 Cultural Area - Sound Requirements - Base D and B 66 Cultural Area -Sound Requirements - Stage Monitor 67 Cultural Area - Sound Requirements - Side Fill Line array approx. 800 Watt each 68 Cultural Area - Sound Requirements- Corded Mikes 69 Cultural Area - Sound Requirements - Cordless Mikes 70 Cultural Area - Sound Requirements- Headset mike 71 Cultural Area - Sound Requirements - Foot Mike 72 Dynamic wired mikes of different sizes 73 Digital Console 96 Channels (sound engineers and adequate number of technicians to be available at all times during the event.) 74 Carpet on 26.01.2025 for Parade Gyanpath and outer area with Pasting. 75 Saw dust provision 76 Spinkler for water spray 77 Drummer Technical Rider1) Drum Kit: DW Performance or Yamaha Maple Custom (or similar).Completing: drums: bass drum 22’, tom 10’, tom 12’,floor tom16’;snare 14’,Cymbalspaistechokes; Hi Hat 14”, Ride 20”, Crash 16” and Splash 10” stands: one for hi-hat, one for snare drum, 4 (four)boom stands for cymbals besides hi-hat stand; Drum chair with adjustable height; all elements of drum kit should be located on a carpet or rubber covering (against sliding);Drum Riser is a mus + Monitors + in ear monitor-One shaker,2) in-ear Monitor3) Wedge Monitor One jackOne monitorOne keyboard stand One notation stand 78 Guitar tech rider:1. Guitar amp (Fender twin reverb/ Marshall JCM 900)2. Guitar stand3. 1 Amp(Fender Twin Reverb or JCM 900 or Marshal100HCFX Amp Head with 4 Speaker Marshal Cabinet )4. 1 Mic With Stand (Shure SM57)5. 2 DI Box6. 4 Guitar Aux7. 1 Guitar Stand8. In Ear monitor-1 no.9. Notation stand- -1 no. 79 Keyboard: (Keyboard TR) stereo wires 2DI Keyboard amp Keyboard stand 80 MAIN ARTISTSEENHIESER e845 only wireless MEDIUM BOOM STANDSMultifunction Power Extension Boards- 4 Nos 81 Harmonium1. SM58 One Laptop 82 Drums:Pearl session / Master / Pearl decade maple Or• Tama superstar Hyper drive/Tama Silver star/Star Classic• HI Hat 14 inch, Crash 18 inch, 16 inch Crash Ride 20 inch, China 16 inch, Splash 10 inch, with Stands and 1 extra Boom Stand(All from K Custom series of ZILDJIAN)Drum Mic Kit- Audix Mic Kit OR PGA and( Beta 52A For Kick separately) 83 OUTPUT PATCH 84 INPUT CHANNEL MONITOR 85 TaIkBactMac.ForCoordinationStageto Mixing Console with Monitor 86 Power source must be 280V, earthed aria connected ro a safety system thai breaks tke c rcu›r whenever Phase is connected to ground, 4 Power outlet Stripe are required for the musicians on Stage placed according to where the musicians at onstage. 87 Floor Monitor Monitors fPRx 8 S/SRX 8t5) 88 8 x: Floor Monitor S wzT1 carry their individual preferred mix for the musicians on stage side file 89 JBL SRX 725 WITH SRX 718-2 PAIR 90 Channel 22-23 Keyboard 2nos. DI BOX with PowerPoint Vocal mic. SM58 1no. With Tripod 8uom stand 91 MONITOR MIK.8 & 9 92 JBL Lirte Array w th sub Low 93 Two LED Plasma 60 inches with touch screen facility with dedicated 10 MBPS lease line for internet connectivity 94 Cultural Area Console : a dedicated 100 mpbs board band internet connectivity for live coverage & sharing on various SocialMedia Platforms 95 Reserved Lounge: To cater requirements for Dignitaries as per security agencies.- Construction of Space Frame Pillar less, Water Proof, Fire Retardant Aluminum hanger Structure 20m x 10m with fabric false ceiling with top and covered from all sides with wooden platform base of 10 cm with new carpet, Double Door Entrance and Exit, Well Lit befittingthe Ambiance as per our requirement- using fittings, cables etc of ISI standards, well ventilated, with colorful fabric and befitting interiors.10Nos. for entire Event Flower Bouquets and 8 Nos. for entire Event table top flower arrangements on daily basis. All material used should be in consonance to fire safety norms and adhere to fire safety standards. 96 Reserved Lounge: 10 nos. round table of 8 pax seating capacity each and 100 banquet chairs with covers. 97 Reserved Lounge: Sound system with adequate speakers, amplifier etc. with 8 number table mikes; 2 podium mikes and 4 number cordless mikes 98 Reserved Lounge: Sofa set ( Double Seaters) 99 Reserved Lounge: Centre Tables 100 Reserved Lounge: Side Tables 101 Reserved Lounge: Air Circulators 102 Reserved Lounge: Air-conditioned portable Toilets in vicinity of VIP Hanger with dedicated staff deployment with toiletries, amenities and adequate water supply at all time of event. 103 Reserved Lounge: Internet lease line 20 Mbps forcreating Wi-Fi zone with complete set up / infrastructure 104 Hangar for Ministry of Information & Broadcasting (I&B) Exhibition - Construction of 01 Nos. for entire Event of Space Framepillar less, Water Proof, Fire Retardant, Safe Aluminum Hanger Structure (10mx20m) with fabric false ceiling, 10cm wooden platform base with carpet and covered from three sides plus top and well lit. 20 number octonorm tables, 40 banquet chairs with cover. 05 Nos. air circulators and 10 Nos pedestal fans. The average electrical load should be 10KW including load required from 22nd January 2025fabrication of exhibition area. All materialused should be in consonance to fire safety norms and adhere to fire safety standards. 105 Hangar for Ministry of Tourism Experiential Zone - Construction of 01 Nos. for entire Event of Space Frame pillar less, Water Proof, Fire Retardant, Safe Aluminum Hanger Structure (10mx20m) with fabric false ceiling, 10cm wooden platform base with carpet and covered from three sides plus top and well lit. 20 number octonorm tables, 40 banquet chairs with cover. 05 Nos. air circulators and 10 Nos pedestal fans. The average electrical load should be 10KW including load required from 22nd January 2025 for fabrication of exhibition area. All material used should be in consonance to fire safety norms and adhere to fire safety standards. 106 Hangar for Ministry of AYUSH - Construction of 01 Nos. for entire Event of Space Frame pillar less, Water Proof, Fire Retardant, Safe Aluminum Hanger Structure (10 mtr. X 20 mtr.) with fabric false ceiling, 10cm wooden platform base withcarpet and covered from three sides plus top and well lit. 20 number octonorm tables, 40 banquet chairs with cover. 05 Nos. air circulators and 10 Nos pedestal fans. The average electrical load should be 10KW including load required from 22nd January 2025for fabrication of exhibition area. All materialused shouldbe in consonance to fire safety norms and adhere to fire safety standards 107 Hangar for Ministry of Railways - Construction of 01 Nos. for entireEvent of Space Frame pillar less, Water Proof, Fire Retardant, Safe Aluminum Hanger Structure (10 mtr. x 10 mtr.) with fabric false ceiling, 10cm wooden platform basewith carpet and covered from three sides plus top and well lit. 10 number octonorm tables, 20 banquet chairs with cover. 02 Nos. air circulators and 5 Nos pedestal fans. The average electrical load should be 10KW including load required from 22nd January 2025 for fabrication of exhibition area. All material used should be in consonance to fire safety norms and adhere to fire safety standards 108 Hangar for Ministry of Food Processing - Construction of 01 Nos. for entireEvent of Space Frame pillar less, Water Proof, Fire Retardant, Safe Aluminum Hanger Structure (10 mtr. x 10 mtr.) with fabric false ceiling, 10cm wooden platform basewith carpet and covered from three sides plus top and well lit. 10 number octonorm tables, 20 banquet chairs with cover. 02 Nos. air circulators and 5 Nos pedestal fans. The average electrical load should be 10KW including load required from 22nd January 2025 for fabrication of exhibition area. All material used should be in consonance to fire safety norms and adhere to fire safety standards 109 Hangar for Footwear Design & Development Institute - Construction of 01 Nos. for entire Event of Space Frame pillar less, Water Proof, Fire Retardant, Safe Aluminum Hanger Structure (10 mtr. x10 mtr.) with fabric false ceiling, 10cm wooden platform basewith carpet and covered from three sides plus top and well lit. 10 number octonorm tables, 20 banquet chairs with cover. 02 Nos. air circulators and 5 Nos pedestal fans. The average electrical load should be 10KW including load required from 22nd January 2025for fabrication of exhibition area. All material used should be in consonance to fire safety norms and adhere to fire safety standards 110 Food Court: Gazebo: Water proof, Specialized covered structure on truss for all over the venue at food court. Flat roof structure size10mx10m with 10cm wooden flooring with carpet and thematic colorful decoration to give a festive look. 111 Food Court - Water Proof Pagodas (5 mtr. x5 mtr.) with wooden platform base of 10 cm, carpet and each pagoda consisting of 3 light fittings of 40 watts each or compatible LED light fittings, Furniture- 4 Nos. working table of 6’ x 3’ with white disposable laminated sheets (to be changed regularly) 4 Nos. Plastic/ Banquet chairs, o1 No Pedestal fan, 5 Nos. power points, 1 nos. Dustbin, and 1 No. Fascia. The average Electricity load should be 5 KW in each pagoda. 112 Food Court – 5 Kitchen Areas of 250 SQM each tin Sheds and stone / brick surface with each kitchen areas consisting working tables of 6’ x 3’ (30 No’s in each kitchen area) with facility of water for cooking and dish washing. Kitchen area to be adjoining food court area. Allkitchen areas to have adequate fire safety measures like ABC fire extinguishers, sand bags, sand buckets, fire Marshalls etc., as per the fire safety guidelines 113 Food Court – Steel Dustbin with Garbage bags with clearance at regular interval and timely cleaning to maintain hygiene during the entire period of event. Theme of Swachh Bharat to be adhered. Large size with covers. 114 Food Court - Outdoor LED Wall 16ft x 8ft, with fabric Branding, Platform and sound system. 115 Food Court – Banquet (Plastic Tables) Tables Round with approx. 1.5 mtr. Dia (25 nos) with Umbrella and Rectangular/Square Dining Tables (25 Nos) with umbrella to accommodate 4/6 chairs each. Table covers for all tables. 116 Food Court – Banquet/ Plastic chairs with chair covers and bands/ Wooden chairs 117 Food Court - Bistro Tables with covers 118 Food Court - Stage for Performance of Nukkad nataks, size 50sq mtrs with 2 Ft height and steps on two side with sound system – 4 speakers, 10- standing mikes, 2 cordless mikes and 2 collar mikes. 119 Handicraft Area- Water Proof Pagodas (3 mtr. x 3 mtr.) Structure with wooden platform base of 10 cm, carpet and each pagoda to have 3 light fittings of 40 watts each or compatible LED light fittings, Spot Lights (9 nos), Furniture- 2 Nos. Octonorm Table 3’x 1.5’, Banquet/Plastic chairs with covers 2 nos., 3 Nos. Power Points, 1 No. Dustbin etc with Modular structure inside. Each Modular structure within each pagoda to have 9 shelves/slabs (3 on each wall) for display their products, Presentable Almirah (all equal size) withlockablefacilitytobeplacedineach handicraft and handloom pagoda and 1 No. fascia. 120 Handicraft Craft Area- Including: Dustbin with Garbage bags with clearance at regular interval and timely Cleaning to maintain hygiene during the entire period of event. Theme of Swachh Bharat to be adhered. 121 Handicraft Craft Area- Including: Outdoor LED Wall 16’x 8’ with fabric Branding with platform and sound system. 122 Handicraft Area: Internet lease line 20 Mbps for creating Wi-Fi zone with complete set up/ infrastructure 123 Handicraft Craft Area- Including State Theme Pavilions: Water Proof Pagodas (6 mtr x 6 mtr) Structure each with wooden platform base of10 cm, carpet with each to have 6 light fittingsof 40 watts each or compatible LED light fittings, Furniture- Octonorm Table 3’x 1.5’ - 04 Nos, Banquet chairs with chair covers 4 nos,Power Points 08 Nos, Spot lights -15 Nos, Dustbin -01 No, etc. with Modular structure inside.EachModularstructurewithineach theme Pavilion to have Presentable Almirah (all equal size) with lockable facility to be placed in each Theme Pavilion pagoda and 1 No. facia. Each theme Pavilion (6 mtr x 6 mtr) to have additional average Electricity load of 4 KW for each pavilionincluding Electric load required from 22nd January,2025 for fabrication of stalls) 124 HandicraftCraftArea-IncludingCentral Ministries/ Departments Pavilions: Water Proof Pagodas(5mtrx5mtr)Structureeachwith wooden platform base of 10 cm, carpet with each to have 6 light fittings of 40 watts each or compatibleLEDlightfittings,Furniture- OctonormTable3’x1.5’-04Nos,Banquet chairs with chair covers 4 nos, Power Points 08 Nos, Spot lights -15 Nos, Dustbin -01 No, etc. withModularstructureinside.EachModular structure within each theme Pavilion to have Presentable Almirah (all equal size) with lockable facility to be placed in each Central Ministry/ Department Pavilion pagoda and 1 No. fascia. Each Pavilion (5 mtr x 5 mtr ) to have additional average Electricity load of 4 KW for each pavilionincluding Electric load required from 22nd January,2025 for fabrication of stalls) 125 Neat Barricading and Fencing: Strong, proper, effective, presentable and complete barricading and fencing (using good material) of each tableau. (Total Tableaux expected to be 40) in parv area without disturbing the décor of the tableaux and inconvenience to the visitors 126 Military Band Stage - 4 sides open with for Military Bands of size 12m x 8.5m size with fabric branding on four sides with two side steps, carpet, with stage lighting (20 par /LED lights) from the front side of the stage 127 Military Band Stage -Sound system for Military Bands (48-piece band), 20 Micro phone, Cordless mikes -2nos and collar mikes- 2 nos, JacksandwiresforGuitar,keyboardand Octopad, Speakers -12 nos, Monitor speaker- 4 nos, Woofers and Tweeters, Mixer Channel, amplifier etc. 128 Military Band Stage - Banquet chairs with chair covers and bands with covers on band stages- 30 each stage 129 AYUSH Stage (Yoga Performance) 4 side open and covered on top with waterproof, stage for Yoga Performance of 12m x 8.5m size with 4ft. height with fabric branding on four sides with two side steps, carpet, with stage lighting (20 par/LED lights) from the front side of the stage. Sound System with Speakers, amplifiers,04 Cordless/Collar Mike & LED Wall 20’x10’ with platform. 130 Revolving / Rotating CCTV Cameras with wiring – (in entire event area including periphery, surrounding areas and parking),Installation and operation during entire event with Night vision capacity, monitoring andrecording and including deployment of technically trained manpower to monitor CCTV Operation. At the end of the event complete recording of all the days to be submitted in hard disk. 131 Fire Fighting - Provision (in entire event area including parking and surrounding areas) with firefighting equipment and manpower including Fire Tenders- 6, ABC Type fire extinguishers (10 Kg) – 300 Nos., Sand Buckets 300 andSand Bags – 750 Nos., Fire Marshalls– 40 Nos.and Fireman – 40 Nos. duly trained as perprevailing fire safety norms in uniform as per requirements of Authorities. 132 Conservancy and housekeeping - Provision of 250 Nos.cleaningStaffeach dayfor conservancyandmaintenanceoftheentire event areas including back areas, surrounding areasincludingsurroundingtoiletareasetc. Staff should be in proper uniform with cleaning equipment’s like vacuum cleaner, brooms, garbage bags etc. 133 Ceremonial Gas Filled balloons of Tri-colors and medium size- On the Inaugural Day only 134 Catering Arrangements at Reserved Lounge for 350 Pax (Each Day Menu to be changed on daily basis) Variety of Tea, coffee, cold beverages to be available on daily basis along with savory, sweet items like samosa, pakora, mini patties, dry Indian sweet, cookies and biscuits and 2 nos. water dispensing machines with 6 nos. drinking water jars of reputed brands approved by FSSAI with glass and disposable eco-friendly paper glasses. Well- groomed and uniformed staff to cater in Reserved Lounge. Menu to be change on daily basis 135 Office equipment’s: Computer with UPS 136 Office equipment’s : Printers along with paper for printing 137 Office equipment’s : Photocopier Machine with photocopier paper 138 Office equipment’s: Data cards for internet connectivity (4 GB) 139 Creative Branding in fabric: Creative and graphic designing of symbol of event with options, designing of view cutter, signage, backdrop, gates, 3D Cut out at various locations and direction indicator panels (as per input from principal organizer) in and aroundthe entire Parv Area and periphery. In addition, Interactive wall using good material- fabric, wood crafted jaalis, fabric prints using 3-D effects, selfie points; Graffiti walls, masks; Dance Postures with Special Emphasis on concepts like “Viksit Bharat @ 2047” “Vikas bhi Virasat bi” “One District One product”, “Nari Shakti, Millets, Life Millets, Travel for Life”,”Ek Bharat Shrestha Bharat” etc. to create and enhance the ambiance to give patriotic, festive and colorful look as well as for more public participation. The entire creatives for branding will be as perthe approval of Ministry of Tourism. 140 Cloth masking on frame of entire Boundary wall with 09 Feet height as per site requirement. 141 Creative Zone: for activities like short quiz competition, face painting/ tattoos, Karaoke activities with sound systems for public participation with activity co-coordinators and any other participative concepts with adequate coordinators etc. 142 30 Nos. of Drinking water dispensers equipped with 20 Ltr. Packaged Drinking water jar of reputed brand, replenish able CAN/JAR with sufficient disposable eco-friendlycups (CAN/JAR to be replaced at regular interval for un-interrupted supply) on daily basis for entire event. 1000 jars of 20 ltr per day 143 Still and Video Photography of entire Event – comprising of two single Camera Setup withlive projection in Food Court and Handicraftarea and at least 4 still photographers. Softcopy of photo shoot and video recording to be handed over on daily basis/as and whenrequired basis to ITDC for entire event including photo Album/s, DVD’s and teasers(short clippings of 3 to 5 minutes’ duration for the event as per the requirements of Ministry). 500 nos. of photos (5”x7”) with presentable album. All data pertaining to Bharat Parv to be delivered in a separate hard disk. 144 Toilets for General Public (Male and Females) with hand washers with liquid soap, proper water facility and their cleanliness at regular intervals and to maintain proper hygiene. All the toilets in the parv area to have provision of light inside. 145 Drinking water Tanker - 5000 Ltr. in Food Court area for kitchen purpose - on Daily basis. 10 Water tankers of 5000 liter each per day 146 Central PA System for entire venue (Help desk and control rooms ) 147 Battery Operated Golf Cart with driver for VIPs ( 5 +1) seating capacity each 148 Wheel Chairs for Differently abled persons 149 Walkie-TalkiesCommunicationDeviceswith System 150 Kitchen Apron of size 42”x24” with strap andgood quality fabricwith Incredible India branding 151 Umbrella large size with Branding 152 Media Hanger structure in Food Court Area: To cater requirementsfor Media Personnel: Construction of Space Frame Pillar less, Water Proof, Fire Retardant Aluminum hanger Structure with fabric false ceiling of size 15m x 10m with top and covered from all sides with wooden platform base of 10 cm with new carpet, Double Door Entrance and Exit, Well Lit befitting the Ambience as per our requirement- using fittings, cables etc of ISI standards, well ventilated, with colorful fabric and befitting interiors, 8 nos. table top flower arrangements on daily basis. All material used should be in consonance to fire safety norms & adhere to fire safety standards. 153 Media Lounge: Sofa set ( Double Seaters) 154 Media Lounge: Centre Tables 155 Media Lounge: Side Tables 156 Media Lounge: Office set –up: Computers with UPS 157 Media Lounge: Office set –up Black and White Printers with printing paper 158 Media Lounge: Office set –up Colour Printers with printing paper 159 Media Lounge: Internet lease line 20 Mbps for creating Wi-Fi zone with complete set up/infrastructure 160 Media Lounge: Output Box with 20 Points for Media 161 Media Lounge: Office set –up Photocopy Machine with adequate photocopy paper and stationery. 162 Media Lounge: Office setup - Octonorm Tables 3ft x 1.5ft 163 Media Lounge: Office setup - Banquet chairs with chair covers 164 Media Lounge: Office setup - Power points 165 Media Lounge: Office setup – s t e e lDust bin 166 Media Lounge: Arrangements for press briefing for 75-100 pax with banquet chairs and head table for 5 pax. Audio Visual arrangements with 5 mikes for head table and 4 cordless mikes for Q and A. Podium with Podium Board and 2 mikes. Flower arrangements for head table. 167 Catering Arrangements for 300 Pax per day at Media Lounge – (Each Day; Menu to be changed on daily basis). Variety of Tea, coffee, cold beverages to be available on daily basis along with savory, sweet items like samosa, pakora, mini patties, French fries, Dry Indian sweet, cookies and biscuits and 2 nos. water dispensing machines with 4 nos. drinking water jars of reputed brands approved by FSSAI with glasses and disposable eco-friendly paper glasses. Well-groomed and uniformed staff to cater in Media Lounge. 168 Media Lounge: Enclosure with 4 tables and chairs for dedicated catering 169 Air-conditioned portable toilets in vicinity of Media Lounge with dedicated staff deployment with toiletries, amenities and adequate power supply, water supply at all time of event. 170 Air Circulators for Media Hangar 171 Studio Kitchen Stage built on 18” inches raised wooden platform with 240 degree open,one entry and exit, size 12 x 8 with running water , attached mise en place area size 6 x 12 with running water facility and wash up area size 6x12 with sink and running water facility for Washing utensils, Size of Studio kitchen tent should be 20 x 40 with waterproof roof and barricading of 3 feet height with one entry and exit 172 Studio Kitchen: Theatre seating with 50 banquet chairs with covers in front of the studio kitchen. 173 Studio Kitchen Sofa set for VIP (Single Seater) 174 Studio Kitchen Power Point 15Amp 175 Studio Kitchen Electrical Load 176 Studio Kitchen: Video Camera placed on the working area and both sides with complete recording of entire event 177 Studio Kitchen LED Screen size 12x8 178 Studio Kitchen Collar Mike 179 Studio Kitchen Sound System with four Speaker 180 Studio Kitchen Fire Extinguishers –ABC Type 10 Kg, Sand Buckets and Sand Bags 181 Studio Kitchen Chef Caps with Incredible India Print 182 Studio Kitchen: 04 Utility workers for the studio kitchen per day 183 Pathway: Wooden platform of 10cm with grey carpet properly fixed throughout the Parv area to access the food court stalls, stage, Handicrafts and Handlooms stalls, State Theme Pavilion, VIP Lounge, Media Lounge, I&B Hangar, Hangars, offices of ministries, ITDC and Public Conveniences etc. The entire pathway to be with grey carpet (properly fixed) and approx. of size 8 ft. in front and 4 ft. in back of all the areas for smooth movement of public at large. The pathway to also be disabled friendly with interconnected pathway facility with platforms at various places includingconnectivity from Gyanpath to both the lawns. The pathways to be made with clear cut space for movement of differently abled persons’ in wheelchair. 184 Green net spread all across the parv area except the wooden platform ,Pathway to control Dust 185 Arrangement of sprinkling of water on daily basis to settle dust in the Parv area 186 Office Equipment: Comprising of: Computers with UPS and skilled manpower for Registration (preparation of badges etc.) with printers for colored and black and white printing along with stationery and paper. 187 Office Equipment: Heavy Duty Photocopier machine along with stationery and photocopy paper 188 Manpower: Ushering Staff per day (Female).12Hrs Shift Presentable, soft – spoken duly uniformed as per our requirement. Uniform to be provided by the bidder. 189 Manpower: Assistants (Male) per day 12 Hrs. shift. Presentable, soft – spoken duly uniformed as per our requirement. Uniform to be provided by the bidder. 190 Augmentation of lights over and above normal lighting for a well-lit Parv Area and surrounding area with 300 nos. LED metal lights. 191 Divider Railing: To regulate smooth entry and exit of visitors to the food court area and the tableaux/ handicraft area. As per our requirement. 192 Security Items or Services: Tensil Canopies of water proof stretchable fabric with MS Frame to cover 40ftx13 ft to cover 10 No’s DFMD at entry points 193 Tableaux Lighting: LED Parcan up lighters for Tableaux area 194 Water for cultural Artists: 4 nos. water dispensing machines with 50 nos of 20 litre each drinking water jars of reputed brands approved by FSSAI for the cultural artists eachday with ecofriendly disposable paper glasses 195 Promotional Tee Shirts with assorted sizes having Incredible India & Travel for LiFE Logo (as per size requirements) 196 Lamp Lighting With accessories viz oil, wicks, candle, floral decoration etc 197 ProvisionofcoveredkioskswithiPadsor equivalentsoftwarewithgadgetsatvarious places in the parv area to provide pre - ordering of food to avoid crowd at the counters in the food court. 198 Dedicated Social Media team to promote & publish the event on various social media platforms and under overall supervision/ Guidance / requirement of Ministry of Tourism. 199 A special stage of size 24ft x 12 ft with carpet and with all necessary audio visual systems at the venue for on – the – spot performance by kids up to 14 years old.

BRR : 9481110 Construction Of Main Location For T.F.C. Ram Van Gaman At District Chitrakoot (U.P.) - TFC, RAMVANGAMAN 3 Carriage of good earth by mechanical transport including loading, unloading and stacking 4 (upto 20KM) 5 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 6 All kinds of soil 7 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 8 All kinds of soil (From 1.5 to 3 m depth) 9 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 10 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 11 Supplying chemical emulsion in sealed containers including delivery as specified. 12 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 13 Diluting and injecting chemical emulsion for pre-constructional anti-termite treatment (excluding the cost of chemical emulsion) : 14 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : 15 With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. 16 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 17 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 18 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 19 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 20 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 21 Centring and shuttering including strutting,propping etc. and removal of form for 22 Foundations, footings, bases of columns etc. for mass concrete. 23 Suspended floors, roots, landings, balcnies and access platform. 24 Shelves (Cost in situ) 25 Lintels, beams, plinth bams, griders, bressumers and cantilevers. 26 Columns,Pillars, Piers, Abutments, Posts and Struts 27 Stairs, (excluding landings) except spiral-staircases 28 Edges of slabs and breaks in floors and walls Under 20 cm wide 29 Weather shade, Chajjas, corbels etc., including edges 30 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured)Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). 31 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 32 Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 33 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 34 All works upto plinth level 35 Concrete of M30 grade with minimum cement content of 350 kg /cum 36 All works above plinth level upto floor V level 37 Concrete of M30 grade with minimum cement content of 350 kg /cum 38 Add for using extra cement in the items of design mix over and above the specified cement content therein. 39 ANCHOR BLOCK FOR STONE BENCHES 40 Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 41 400 mm dia piles 42 Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid) 43 400 mm dia piles 44 Vertical load testing of piles in accordance with IS 2911 (Part IV) including installation of loading platform by Kentledge/Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & the direction of Engineer in-charge. 45 Single pile upto 50 tonne Safe capacity 46 Initial test (Test Load 2.5 times the Safe capacity) 47 Routine test (Test Load 1.5 times the Safe capacity) 48 MASONRY WORK 49 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 50 Cement mortar 1:6 (1 cement : 6 coarse sand) 51 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). 52 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100mm/125mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. 53 WOOD WORK 54 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 55 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 56 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 57 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): 58 Rectangular or square. 59 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 60 1.0 mm thick 61 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. 62 With 12 mm mild steel U beading 63 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). 64 Providing and fixing 12 mm thick frameless toughened glass partitions of approved brand and manufacturer, including providing and fixing partitions at top & bottom with aluminum channel etc. all complete as per direction of Engineer-in-charge 65 Providing and fixing approved brand and manufacturer SS 304 grade hardwares for Doorsetc. 66 Providing and fixing approved brand and manufacture SS 304 grade D type 300mm Pull Handle with 22mm dia fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 67 Providing and fixing approved brand and manufacture SS 304 grade Glass door Lock, top and bottom patch fitting with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 68 Providing and fixing approved brand and manufacture SS 304 Lever Handle D-type, 22mm dia fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 69 Providing and fixing approved brand and manufacture SS 304 grade SS 304 grade Mortise Dead Lock with 60mm Backset fixed fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 70 Providing and fixing approved brand and manufacture SS 304 grade Tower bolt 250mm long with 10mm dia fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 71 Providing and fixing approved brand and manufacture SS 304 grade Tower bolt 150mm long with 10mm dia fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 72 Providing and fixing approved brand and manufacture SS 304 grade wall mounted door buffer fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 73 Providing and fixing approved brand and manufacture SS 304 grade Door Stopper - door mounted hanging type fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 74 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromiumplated brass screws, nuts, bolts and washers etc. complete. 75 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 76 125 mm 77 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 78 Toilet CubicalProviding and fixing Toilet Cubicle (of following standard dimension which includes 600 mm door size width) made of heat, bacteria, water, chemical, scratch, impact and anti bacterial resistant 12 mm thick solid compact laminate panelsFinish of the compact laminate should be raw silk which include doors, pilasters and intermediate panels finished with approved texture/shade as per the detail drawing and as per IS 2046 (Indian Standard) and as per fire retardant BS-476/97 standard.This also includes providing and fixing in position necessary hardware made out of Stainless Steel (Grade 316) as per manufacturers specifications and EIC instructions like (1) Door Knob, (2) Gravity Hinges, (3) Thumb turn lockset indicators, (4) Coat hooks, (5) U- Channels, (6) SS-Shoe Box Plate, (7) MS-Base Plate, (8) Rubber noise deafening tape, (9) Screws and wall Plugs. 79 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 80 Using M.S. angels 40x40x6 mm for diagonal braces 81 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 82 Hot finished welded type tubes 83 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 84 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 85 Providing and fixing stainless steel (Grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 86 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 87 25 mm thick 88 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 89 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 90 Glazed Vitrified tiles Matt/Antiskid finish of size 91 Size of Tile 600 x 600 mm 92 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. 93 Size of Tile 600 x 600 mm 94 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 95 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 96 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 97 Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent 98 Extra for pre finished nosing to treads of steps of Granite stone. 99 Extra for Granite stone flooring in treads of steps and risers using single length up to 2.00 metre . 100 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 101 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 102 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. 103 Granite of any colour and shade 104 Area of Slab over 0.50sqm 105 Extra for providing edge moulding to 18mm thick marblestone counters, Vanities etc. including machine polishing to edge to give high glossfinishetc.completeasper designapprovedbyEngineer-in-Charge. 106 Granite work. 107 Extra for fixing marble /granite stone over and abovecorresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. 108 Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete. 109 12mm cement plaster of mix : 110 1:6 (1 cement: 6 coarse sand) 111 15 mm cement plaster on the rough side of single or half brick wall of mix : 112 1:6 (1 cement: 6 coarse sand) 113 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 114 6 mm cement plaster of mix : 115 1:3 (1 cement : 3 fine sand) 116 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 117 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 118 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 119 Painting with synthetic enamel paint of approved brand and manufacture of required color to give an shade. 120 Two or more coats on new work including priming coat of ordinary paint approved brand. 121 Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 122 Providing & fixing galvanized low carbon wire, anealed wire Chicken mesh formed by twisting two adjacent wires at least four times, forming a hexagonal shaped strong honeycomb mesh structure on joints of RCC & Brick work before plastering, of required gauge (not less than 21 gauge)and size with nails etc. complete as specified in drawing and as per the Direction of Engineer-in-charge. 123 Stone work ashlar sunk or moulded or sunk and moulded upto floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : 124 White sand stone 125 Extra for stone work ashlar sunk or moulded or sunk and moulded or carved in : 126 Triangular or Square or rectangular pillars 127 Circular or polygonal pillars 128 Extra for stone work ashlar sunk or moulded in cornices. 129 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. 130 White sand stone 131 DRY CLADDINGProviding and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). 132 White sand stone - 30mm thick gang saw cut stone 133 Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-incharge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). 134 Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-incharge. 135 Applying breathable, non-reactive, antifungal, and water repellant Silane/Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the existing sand stone masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-charge (The rate is inclusive of all materials & labours involved except scaffolding). 136 Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. 137 White sand stone 138 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 139 12.5 mm thick tapered edge gypsum moisture resistant board 140 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 141 With 15 mm thick Tegular edged light weight calcium silicate false ceiling tiles 142 Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gsm/sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross T of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main T at 600mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 143 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineering-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineering-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65mm. 144 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 145 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 146 In 75x75 mm deep chase 147 Providing and laying broken AAC Block in sunken portion of W.C. & kitchen. These broken Block mixed with cement mortar 1:8 ( 1 cement : 8 coarse sand) laid and compacted properly including supply of labour, material, and tools and plant etc. as per instruction of Engineer-in-charge. 148 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 149 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : 150 For fixed portion 151 Powder coated aluminium (minimum thickness of powder coating 50 micron) 152 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). 153 Powder coated aluminium (minimum thickness of powder coating 50 micron) 154 Providing and fixing 6 mm thick high performance toughened glass from approved manufacturer complete in all respects as per direction of the Engineer-in-charge. (Required properties Solar factor 0.43, U-Value (W/sq.m-K) 5.6, Visible light transmittance 0.43). The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 155 PLUMBING Work 156 SANITARY INSTALLATIONS 157 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 158 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. 159 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 160 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 161 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- 162 White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 163 Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink of approved makeas per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting offittings and brackets,cuttingandmakinggoodthe walls wherever required 164 Kitchen sink with drain board 165 510x1040 mm bowl depth 250 mm 166 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 167 Providing and fixing Differecially abled toilets including Wash basin, Water closet,Cistern, grab bars & hand rails etc. The rate include cost of all material & labour involved in the item complete and all as per direction of engineer incharge.For physically handicap person consisting of; 168 Providing & fixing heavy quality PVC waste pipe for sink including PVC waste fitting Complete 169 Flexible Pipe 170 40mm Dia 171 Providing & fixing toilet paper holder 172 C.P. brass 173 Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipesfor soil, waste SWR Type-B as per IS : 13592 suitable for rubber ring joints for vertical pipes and solvent cement joints for horizontal pipes, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors),reducers, couplers, cowels, clamps, hangers, rubber rings, clean outs, provision for C P Grating fixing for any waste connection from washing machine etc. fixing at wall / ceiling / floor level supported by clamp & hangers etc.inside duct / suspended from floor under false ceilingfor proper completion of the work. The rubber ring shall confirm to IS:5382. ( (SOIL, WASTE, RAIN WATER & VENT) 174 110 mm diameter pipe 175 Providingandfixingin position Upvc full bore P / S trap with 50 mm water seal(IS : 14735) of the following sizes .Making proper connection with solvent cement. 176 Providing, fixing & testing uPVC pipes, conforming to IS 4985 class 3 (6 kg/cm2) including injection moulded fittings, jointing with solvent cement, cutting and making good the floors and walls and jointingto trap/waste pipe, complete of outer dia. (Indirect waste) 177 40mm diameter pipe 178 50 mm diameter pipe 179 63 mm diameter pipe 180 Providing & fixing Nickel Chromium Platedliquid soap dispenser with metallic bottle of approved brand & make112 mm distance from wall of standard shape with bracket (Nickel chromium plating should pass Salt Spray Test for 200 hours) of the same materials with snap fittings of approved quality and colour, complete as per direction of Engineer in Charge. 181 Providing & fixing soap dish holder of approved design. 182 Providing and fixing CP brass single lever low flowwall mounted Sink mixer with 15 mm CP brass single lever swivel spout with waste complete with flow rate 2.5 litre per minute at 3 bar including cutting and making good the walls where required. 183 Providing and fixing of approved make following-a) Concelaed type CP Brass diverter(for hot and cold water), overhead shower with arm with rubit cleaning system with flow rate 6 litre per minute at 3 bar complete with all accessories as requiredand spoutwith flow rate 3.8 litre per minute at 3 bar, wall flange complete with all accessories as required and making good the walls wherever required. 184 Providing,Fixing wall mounted of approved make Double Coat hookon door complete. 185 Providingand fixing CP brass 2 Way Bib cock with wall flange with flow restrictor with flow rate 2.5 litre per minute at 3 bar. 186 Providing, fixing, testing & commissioning of Floor drain made of uPVC reducing elbow (110x63 mm) with horizontal drain outlet of 63 mm OD, round top of 110 mm OD. (Floor Drain) 187 Providing & fixing uPVC clean out plug with suitable opening with threaded uPVC socket fixed to uPVC pipe joints as required complete in all respects. 188 110 mm dia 189 Providing, fixing and testing of uPVC SWR inlet fittings with two or three saddle inlets of 40, 50 or 63 mm size, fabricated from 110 mm outer dia uPVC pipes and fixed to uPVC traps with solvent cement joint complete in all respect. 190 Providing and fixing SS Grating of 125 mm dia of approved quality and colour complete as per direction of engineer in charge. 191 Circular Type 192 125 mm nominal dia with 25 mm waste hole 193 Providing, Installing & fixing storage type water heater of approved make (vertical/horizontal type ) with copper container, glasswool insulation,stove enamelled M.S jacket, thermostatically controlled inner heater with pilot neon lamps, 15mm inlet stop cock valve, on inlet connection, 15mm dia C.P flexible connection pipe in inlet & outlet suitable for working pressure of 8 kg/sqcm complete as required. 194 Capacity 25 litres 195 Capacity 40 litres 196 Capacity 06 Litres 197 WATER SUPPLY 198 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 199 Concealed work, including cutting chases and making good the walls etc. 200 15 mm nominal outer dia Pipes 201 20 mm nominal outer dia Pipes 202 25 mm nominal outer dia Pipes 203 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 204 Internal work - Exposed on Wall 205 20 mm nominal outer dia Pipes 206 25 mm nominal outer dia Pipes 207 32 mm nominal outer dia Pipes 208 40 mm nominal outer dia Pipes 209 50 mm nominal outer dia Pipes 210 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 211 External Work 212 50 mm nominal outer dia Pipes 213 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 214 20mm nominal bore 215 25mm nominal bore 216 32mm nominal bore 217 40mm nominal bore 218 50mm nominal bore 219 65mm nominal bore 220 Providing and fixing uplasticised PVC connection pipe with brass unions : 221 45 cm length 15 mm nominal bore 222 Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : 223 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 224 Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 225 65 mm diameter pipe 226 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 227 15mm nominal bore 228 Providingand fixingC.P. brass angle valve for basin mixture and geyser points of approvedqualityconfirming to IS: 8931. 229 Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. (The tail pieces if required will be paid separately) : 230 100 mm dia nominal bore 231 Providing, fixing, testing & commissioning of level operated water type butterfly valve conforming to IS : 13095/BS 5155 having CI iron body , ss 316 grade dick, EPDM / nitride complete with 2 Nos. matching flanges, rubber insertion, nuts, bolts and washer etc. of following sizes with locking arrangement. 232 Pressure Rating PN 25 : 233 80 mm dia. 234 Non - return valve with dual plate of CI Body SS plates vulcanized NBR seal flanged end & PN 25 rating as specified. 235 65mm dia. 236 Providing & fixing CI `Y Strainer (screwed/ flanged) with stainless steel fine wire mesh perforated sheet basket with necessary flange/ unions nuts, bolts and washers complete as required. 237 80mm nominal bore 238 Supplying and fixing in position of approved quality Solenoid Valve with by-pass arrangement, isolation cock etc. complete with all required accessories such as level sensor, level indicator, level controller and required cabling for the same. 239 50 mm dia 240 Providing, Installing and Giving satisfactory field testing of Static (Ultrasonic) Domestic Battery operated, MID (Measuring Instrument Directives) approved Static AMR Water Meters diameters having no moving/fixed part in contact with water, with fully body made up of composite material, confirming to ISO 4064 along with manufacturing test certificate and Guarantee certificate with Meter & Battery Guaranteed up-to 10 years with RF Technology for communication. Memory of the device should be directly accessible through an optical scanner. 241 50 mm dia 242 DRAINAGE 243 Providing, laying and joining in position HDPE DWC (Double Wall Corrugated)and conforming to I.S. 16098 of required grade SN-4/SN-8 and suitable for the respective working pressures with all fittings and specials, e.g. couplings, tees, bends, reducers, screwed adapters, flanged tail pieces, etc., jointing as per manufacturers recommendations, all complete including trenching, backfilling & pressure testing etc. (For Sewer & Storm water line). 244 200 mm dia (SN-4) 245 250 mm dia (SN-4) 246 250 mm dia (SN-8) 247 300 mm dia (SN-8) 248 400 mm dia (SN-8) 249 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round HDPE pipes/ RCC pies/S.W. pipesincluding bed concrete as per standard design: 250 200 mm diameter HDPE pipe/ RCC pipe / S. W. pipe 251 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up to haunches of HDPE pipes/ RCC pies/S.W. pipes including bed concrete as per standard design : 252 200 mm diameter HDPE pipe/ RCC pipe / S. W. pipe 253 300 mm diameter HDPE pipe/ RCC pipe / S. W. pipe 254 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 255 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 256 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 257 300mm dia RCC pipe 258 450mm dia RCC pipe 259 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610mm internal dimensiions total weight of cover and frame to be not less than 38 Kg. ( weight of cover 23 Kg. and weight of frame 15 Kg.), with FPS bricks with class designation 7.5With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 260 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : 261 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 262 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 263 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 264 Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand), in side cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design :0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately): 265 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 266 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 267 Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS : 1786 having minimum cross section as 23 mmx25mm and over all minimum length 263 mm and width as 165mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. 268 Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality 269 HD - 20 270 Circular shape 560 mm internal diameter 271 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : 272 For pipes 100 to 250 mm diameter 273 For pipes 350 to 450 mm diameter 274 Constructing brick masonry road gully chamber 50x45x60cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450mm precast RCC horizontal grating with frame complete as per standard design. 275 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 276 EARTH WORK, CONCRETE WORK 277 Excavating trenches by mechanical / manual means of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,for all depth including getting out the excavated soil,& then returningthe soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposingof surplus excavated soil as directed, within lead of 50m. 278 All kinds of soil 279 Pipes, cables etc exceeding 80 mm dia but not exceeding 300 mm dia 280 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm 281 Excavating trenches of required width for pipes, cables, etc including excavation for sockets,depth upto 1.5 m, including getting out the excavated matterials, returning the soil as requred in layers not exceeding 20 cm in depth including consolidating each deposited layers by by ramming, watering,etc. and stacking serviceable material for measurements and disposal of unserviceable matterial for measurement and disposal of unserviceable matterial as directed within a lead of 50m: 282 Ordinary rock 283 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 284 Hard rock (requiring blasting) 285 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia 286 Earth Work in excavation by mechanical means (Hydraulic / excavator ) manual means over area (exceeding 30 cm in depth ,1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed as engineer incharge. 287 Ordinary Rock 288 Hard Rock(requiring blasting) 289 TUBE WELL BORING WITH PUMP 290 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 291 400 mm dia 292 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 293 400 mm dia 294 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.ection of Engineer -in-charge. 295 200 mm nominal size dia 296 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 297 200 mm nominal size dia 298 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 299 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by V notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 300 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 301 200 mm dia 302 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp. 303 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia. 304 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 65 mm dia nominal bore 305 Sypply and Installation of 800 LPM Submersible Pump Set of 10 H.P. capacity, K.S.B. Make including Starter panel, support wire, A. Meter etc. complete. 306 Supply and fixing of nylon jali around the slotted pipes complete as required. up to 10 meter 307 Sypply and laying of alluminium conductor pvc insulated armoured served sheathed cables 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt brick on sides and on top. On surface the cable run shall be fixed on m.s clamps etc. of suitable size or as directed by the Engineer in charge , complete in all respect . the armouring of the cable shall be properly connected with the earth conductor by clamps etc. 308 35 SQ.MM 3-1/2 core 309 Water testing chemical and bactriological 310 RAIN WATER HARVESTING 311 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. 312 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil 313 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 314 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 315 Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform 316 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation-7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 317 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 318 15 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) in single coat on rough side of single or half brick wall. 319 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar 320 Supplying and fixing C.I. cover without frame for manholes : 500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg 321 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 322 All types of soil 323 400 mm dia 324 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 325 200 mm nominal size dia 326 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, onforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 327 200 mm nominal size dia 328 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. 329 Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. 330 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 331 Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin- charge. 332 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in pproved laboratory, i/c disinfection of ubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per uirement and direction of Engineer-in-charge. 333 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia 334 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia 335 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m: 336 All kinds of soil 337 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. 338 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 339 150 mm dia. R.C.C. pipe 340 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round P.V.C. pipes including bed concrete as per standard design: 341 150 mm diameter P.V.C. pipe 342 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 coarse sand (Zone III) : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 343 Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 344 FIRE FIGHTING WORKS 345 Supply, installing, testing and commissioning of clear water packagedFire Fighting Pumping System - to be placed near water tank on Terrace ( fixed speed type) as per following details: 346 Supplying,Installation,testing & commissioning of dust & vermin proofdouble door with canopy type taperd roof wall / floor mounted compartmentlised feeder piller type cubical control Panel for fire fighting terrace pump of front area not less than 1.0 Sqmtr. and depth not less than 300 mm, made out of 2mm thick CRCAsheet with 100 Amp. 4 strip aluminium bus bars with front openable door & locking arrangement, interconnection, control wiring, intrigation with pressure switch i/c suppying & fixing following switchgears & control gears/starters etc. as required.Incomming63 Amps. TP & N SFC with HRC fuses Voltmeter (0-500 Volt) with selector switch.Ammeter (0-60 Amps.) with selector switch & CTs.Set of 3 phase indication lampSuitable HP fully automatic Star/Delta Starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation.Selector switch for local/remote, auto/manual/off operation ON/OFF indication etc. 347 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. It should be complete as per specifications & directions of Engineer-in-charge. 348 3 X 10 sq. mm (22mm) 349 Supplying & laying one number XLPE insulated PVC sheathed Aluminium Conductor armoured UG cable of1.1 KV grade Conforming to IS 7098/1988 with upto date ammendment of following size in the existing RCC/HUME/ METAL /GI /CI /Stoneware/DWC pipe/masonary Open Duct/ cable tray/ open in air etc. as requred. 350 3 core,10 sq.mm. Aluminium Armoured 351 Providing laying, testing & commissioning of C class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. ( For Underground ) 352 100 mm. Dia 353 Providing, laying, testing & commissioning of C class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.(Plant Room piping/Vertical Riser/Downcomer/Floor) 354 25 mm dia 355 32 mm dia 356 40 mm dia 357 50 mm dia 358 65 mm dia 359 80 mm dia 360 100 mm dia 361 Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : 362 Single headed Gunmetal 363 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : 364 Single headed Gunmetal 365 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 366 100 mm dia 367 Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. 368 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 369 100 mm dia 370 Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 371 100 mm dia 372 Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : 373 Gun Metal 374 Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required.20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.36 m 375 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : 376 Gun metal 377 Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 378 2 way-100 mm dia M.S. Pipe. 379 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. 380 Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : 381 Upright Sprinkler 382 Providing & fixing flow switch in following sizes M.S. pipe including connection etc as required. 383 100mm dia 384 Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass/bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser/sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required 385 100mm dia 386 Supply, fixing, testing and commissioning of screwed type brass/bronze lever operated ball valve of full flow with stainless steel ball (AISI 304 & spindle AISI 410) with setting & gland of superior quality having minimum working pressure of 16 kg/sqcm. 387 25 mm Dia 388 Providing and fixing 25 mm dia inspection & testing assembly with gun metal ball valve, gun metal sight glass ,Reducer ,union, G.I PIPE. connection to drain pipe/riser. 389 Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required 390 Providing and fixing standard firemans axe with heavy insulated rubber handle conforming to IS: 926 complete. 391 Providing & Fixing of MS door made up of 16 gauge MS Sheet capable of accommodating fire hose reel, landing valve, hose pipes, fittings, 1 No. CO2& 1 No. Dry podwer type portable fire extinguishers & accessories. The door shall have a front glass with lock and key arrangement & shall be painted with one coat of primer & two coat of finished stove enamelled post office red colour paint & FIRE HOSE written on front. (Approx. size of door: 2100 mm HEIGHT, WIDTH OF DOOR AS PER SHAFT SIZE ) 392 Providing and fixing hose cabinet of size 750mmX600X250mm made of 16 gause thick MS sheet with 4 mm thick float glass doors in front painted FIRE in red paint i/c recessary locking arrangement suitable to accommodate external hydrant with butterfly valve 2 nos. 15 mtr. long hose pipe. 1 no. brach pipe mounted on wall or raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respects for external hydrant. as directed by Engineer-in-Charge. 393 Providing, Fixing, testing and commissioning of resilient rubber lined single arch vibration eliminators suitable for raw water up to 45 deg. C temperature, working pressure 11 Kg/cm2 and test pressure 16 Kg/cm2 to provide relief from stresses at pipe flanges. 394 80 mm dia 395 Supply and fixing of 4 Nos G.I round bottom FIREBUCKETof 9 LTR. Capacity field with stand including proper supporting /mounting arrangement MS Angle Iron Frame painted by fire red colour over 2 coats of red oxide paint and written with white paint FIREcomplete in all respects as per direction of Engineer Incharge . 396 Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below: 397 Concealed work, including cutting chases and making good the walls etc. 398 Providing and fixing of 4.5 Kg. carbon-di-oxide type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase ingernal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming ro IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with internal charge. 399 Providing and fixing 6.0 Kg. ABC Powder type fire extinguishers consisting of welded M.S. cylinderical body, squeeze lever discharge valve fitted with pressure indicating guase internal discharge tube 30 cms long high pressure discharge hose, discharge nozzle, suspension bracket conforming to IS:15683 finished externally with re enamel paint and fixed to wall with brackets complete with inernal charge. 400 Providing, fixing, testing and commissioning of 50 Litres (trolley mounted) Mechanical Foam type Fire Extinguisher. In HP Mild Steel Cylinders ISI marked TAC approved fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged complete in all respects including wall suspension bracket / trolley mounted and confoming to IS:13386 . 401 Providing, fixing, testing and commissioning of CO2 type Fire Extinguisher of capacity 22.5 kg filled with Co2 Gas as per IS 15222 with controll discharge mechanism fitted with Hose, Horn & TROLLEYconfirms to IS 2878 bearing ISI mark. Co2 Cylinder as per IS 7285. 402 Providing and fixing 2 kg capacity clean agent-HFC 236FA Stored Pressure type fire extinguisher ISI marked under IS:15683 complete with importedNovec 1230 manufactured by 3M, with Zero Ozone Depeltion Potential and Very Low Global Warming Potential of 1 with 20 Years Blue Sky Warantee against any regulatory Bans and Restrictions. 403 ELECTRICAL WORK 404 WIRING 405 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 406 Group C 407 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. 408 Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steelconduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. 409 Group C 410 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 411 1 or 2 Module (75mm×75mm) 412 3 Module (100mm×75mm) 413 4 Module (125mm×75mm) 414 6 Module (200mm×75mm) 415 8 Module (125mm×125mm) 416 12 Module (200mm×150mm) 417 Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 418 5/6 amps switch 419 2 way 5/6 amps switch 420 15/16 amp switch 421 3 pin 5/6 amp socket outlet 422 6 pin 15/16 amp socket outlet 423 Telephone socket outlet 424 TV antenna socket outlet 425 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 426 2 x 1.5 sq.mm. + 1 x 1.5 sq.mm. earth wire. 427 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire. 428 2 x 4 sq.mm. + 1 x 4 sq.mm. earth wire 429 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. 430 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 431 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 432 Installation of exhaust fan in the existing opening , including making good the damage, connection, testingcommissioning etc. as required. 433 (a): Up to 450mm sweep 434 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 435 Extra for fixing the louvers / shutters complete with frame for a exhaust fan of all sizes. 436 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required. 437 Installation, testing and commissioning of ceiling fan,including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. 438 Providing and fixing M.S. Fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. 439 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 440 Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 441 20 mm 442 25 mm 443 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 444 20 mm 445 25 mm 446 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. 447 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required 448 Supplying and fixing Data Socket Outlet including modular base and cover plate and 1.6mm thick GI Box etc, complete as required with all acessories and upto the satisfaction of engineer-in-charge. 449 Supply, Installation, Testing & Commissioning of LSZH Cat 6 unshielded twisted pair computer cable with 23 AWG solid copper conductors in existing concealed / surface conduits / Raceways, complete as required and as per technical specifications. (for DATA & Voice outlets) (From ONT box / Rack to Outlets). 450 DISTRIBUTION BOARD 451 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB / Isolator). 452 8 way , Double door 453 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as r.equired. (But without MCB/RCCB/Isolator). 454 6 way (4 + 18), Double door 455 8 way (4 + 24), Double door 456 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally usedwhere 3 phase outlets are required.) 457 12 way (4 + 36), Double door 458 Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required. 459 For 8 way, Double door SPN MCBDB 460 Supplying and fixing Cable End Box (Loose wire box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. 461 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 462 Single pole 463 Supplyingand fixingsingle pole, blanking plate in the existing MCB DB complete etc. as required 464 Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 465 25 A 466 40 A 467 63 A 468 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 469 12 way (4 + 36), Double door 470 Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and 471 For 8 way, Double door FP MCBDB 472 Supplying and fixing of following MCBs, 415 volts, C curve, miniature circuit breaker suitable for inductive load offollowing poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 473 25A 4P MCB 474 40A 4P MCB 475 63A 4P MCB 476 EARTHING 477 Earthing System 478 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. 479 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. 480 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 481 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 482 Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. 483 LT CABLES & TERMINATIONS 484 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 485 Above 35 sq. mm and upto 95 sq. mm 486 Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on cable tray as required. 487 Upto 35 sq. mm (clamped with 1mm thick saddle) 488 Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp) 489 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 490 4 X 25 sq. mm (28 mm) 491 3½×70 sq.mm (38mm) 492 Supplying, unloading, storing of following sizes of 1.1 kV grade XLPE insulated, FRLS outer sheath (Heavy duty) Aluminium/copper conductor, armoured/unarmored cables as per mentioned code, suitable for working voltage upto and including 1100 Volts,to be laid and tied on existing overhead cable trays; or buried underground or laid and tiedover MS supports in masonry trenches alongwith the test report of following sizes of cable to be submitted by the contractor at the time of delivery of material at site. 493 3.5C X 70 Sqmm Al. Armd. 494 4C X 25 Sqmm Al. Armd. 495 4C X 6 Sqmm Cu. Armd. 496 3C X 6 Sqmm Cu. Armd. 497 1C X 6 Sqmm Flexible wire including termination 498 Supplying following 1.1kV grade, XLPE insulated, FRLS type control cables,suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation and with all components as mentioned in BOQ, specifications and schedule, complete as required. 499 4C X 2.5 sqmm copper conductor 500 6C X 2.5 sqmm copper conductor 501 Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE copper conductor cable of 1.1 kV grade as required. 502 4C X 6 Sqmm Cu. Armd. 503 3C X 6 Sqmm Cu. Armd. 504 CABLES MANAGEMENT 505 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 506 100 mm width x 50 mm depth x 1.6 mm thickness 507 150 mm width x 50 mm depth x 1.6 mm thickness 508 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray bends (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 509 100 mm width X 50 mm depth X 1.6 mm thickness 510 150 mm width X 50 mm depth X 1.6 mm thickness 511 Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray Tee (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 512 100 mm width X 50 mm depth X 1.6 mm thickness 513 150 mm width X 50 mm depth X 1.6 mm thickness 514 LIGHTING FIXTURES & FANS 515 The CRI of the fixtures used in should be minimum 90. LED binning < 3-Step MacAdam UGR<19All fixtures shall be with prismatic diffuser. All light fixtures shall be LED having LM79 and LM80 certification from NABL accreditedlaboratory and relevant approved IES files for Dialux. Before dispatch of approved light fixtures,third party test shall be carried out by NABL accredited lab and the test reports shall be submitted.The Service Life of the fixture including driver/control gear should be minimum 50,000 burning hours. The THD should be less than 10%.The housing of the indoor fixtures should be extruded aluminium/CRCA.The IP category should be IP20 or higher for indoor applications and IP65 or higher for outdoorapplications. The Surge Protection to be provided conforming to relevant IS standards/IEC 61643-II Class-2 &EN 61643-II Type-2. The manufacturer’s name/logo should be engraved/embossed on the housing/body or Name/Logo onaluminium plate labels or Name/logo printed on housing/body. The warranty period on complete luminaire including driver/control gear, LED, all accessories should be 5 years from the actual date of completion of work. The Power factor should be 0.95 or higher.All light fixtures (internal/external) and drivers shall be BIS certified. The manufacturer shall submitBIS certificates with respective R codes for each fitting and driver for approval before execution. Number of fittings shall be provided on the basis of average illumination range for different areasmentioned below subject to maximum LPD specified in CPWD internal specification 2013 & ECBC 2017 (ECBC+ Building). All the light fixtures used for indoor applications should be available with DALI Dimmable driver option (for Apartments & Club Areas) 516 2ft x 2ft LED Panel - Surface Mounted.- Wattage : 30W -36W - Minimum System Efficacy-120 lm/W. 517 Downlight - Surface Mounted.- Wattage : 10W -15W - Minimum System Efficacy-120 lm/W. 518 Wall Bracket light- Wall Mounted.- Wattage : 10W -15W - Minimum System Efficacy-120 lm/W. 519 4ft LED Batten Tube Light -Surface Mounted.- Wattage : 36W -40W - Minimum System Efficacy-120 lm/W. 520 4ft LED Batten Tube Light -Wall Mounted (IP-65)- Wattage : 36W -40W - Minimum System Efficacy-120 lm/W. 521 Mirror Light.- Wattage : 5W -10W 522 Bulkhead Wall mounted - Lumen Package 700 lm- Minimum System Efficacy - 100 lm/W 523 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 140-285V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 524 Supply, Installation ,Testingand Commissioning of Exhaust fansforexhaust air as shown on drawings. Eachfan shall be complete with permanent split capacitor, mountingplate andaccessorieslike wire guard, birdscreen andgravitylouvers forweatherprotection as required. Fan selection, arrangement andelectrical characteristics shall be as follows: 525 450 mm dia 900/1400 RPM fan suitable for 220+6%Volts, 50 Hz, single phase AC supply. 526 Main L.T. Panel :Supply& Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entrise Electrical control panel with TPN ACB (65 KA,4Pole Elect draw out , Micor processer Release IPR2) and TPN MCCBs (Four Pole 36 KA with thermal magnatic release) Switches and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter,Selector switches for ammeter and Voltmeter, instrument fuses, current transormer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/ DMC support with detEachable side covers and shall be suitable for extension on the sides. The switches entry boxes shall be complete with suitable cable end boxes reverse. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above Will be provided with Amp Metre, current transfomers and selector switches etc and insurtrment fuse. The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6 mm/2mm.Cubicle type switch board shall be of cat A & B Only. CAT. B Cubicle TypeIncoming - 527 1600 Amp /415 Volt ACB -1 No.Bus-Bar -1600 Amp /415 Volt ACB -1 No.Outgoing -200 Amp MCCB - 1 Nos.( to Audi block light panel )400 Amp MCCB - 1 Nos.( to Audi block AC panel )630 Amp MCCB - 1 Nos.( to fedder pillar panel )250 Amp MCCB - 1 Nos.( to fire pump room panel )40 Amp FP MCCB - 4 Nos.(Street light feeder pillar panel)200 Amp FP MCCB - 2 Nos.(Spare) 528 Bus-Bar -1600 Amp /415 Volt ACB -1 No.Outgoing -200 Amp MCCB - 1 Nos.( to Audi block light panel )400 Amp MCCB - 1 Nos.( to Audi block AC panel )630 Amp MCCB - 1 Nos.( to fedder pillar panel )250 Amp MCCB - 1 Nos.( to fire pump room panel )40 Amp FP MCCB - 4 Nos.(Street light feeder pillar panel)200 Amp FP MCCB - 2 Nos.(Spare)FEEDER PILLAR PANEL: 529 Incoming -630 Amp MCCB - 1 No.Outgoing - 200 Amp 4P MCCB - 3 Nos. 100 Amp 4P MCCB - 2 No.100 Amp 4P MCCB - 1 No. 40 Amp 4P MCCB - 1 No. (for Spare)(Complete as per requirment directed by Project Manager.) 530 Design, manufacture, testing at works, supply, including supervision during installation testing & commissioning of following floor / wall mounted clad switchboard, factory built, modular, sectionalised, dead front, fully compartmentalized with hinged lockable detachable front & back openable, Form IIIB type extensible Partial Type Tested Assembly, IEC-60439 compliant LT cubicle panel of suitable size, suitable for operation on 415 volts, 50 Hz AC 3 phase 4 wire supply system fabricated from powder coated CRCA sheet steel, with all load bearing members of minimum 2mm thickness , all non-load bearing members of minimum 1.6mm thickness and minimum 3mm thick gland plates. The panels shall be fabricated in easily transportable sections, length, height, depth etc. to match with site condition, having vibration free structure with stiffeners provided as required. EXTERNAL LIGHTING PANEL 531 Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories . The panel shall be compatible for IBMS system with open protocol BACnet/ Modbus over IP complete as per specifications. Two Loop Panel. 532 Supplying, installation, testing & commissioningof intelligent analog addressablephotothermaldetectorcompletewithmountingbase complete as required. 533 Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. 534 Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. 535 Supplying, installation, testing & commissioning of fault isolator complete with base as required. 536 Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. 537 Supplying, installation, testing & commissioning of addressable fire control module complete as required. 538 Supplying, installation, testing & commissioning of addressable manual call point complete as required. 539 Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. 540 Supplying, installation, testing & commissioning of intelligent interface unit BACnet/ Modbus protocol i.e. supplying communication links between building management system and fire alarm control panel complete as required. 541 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. 542 Supplying & laying of 2x1.5 sqmm fire survival armouredcable, 600/1000V rated with annealed copper conductorhaving glass mica fire barrier tape covered by an extrudedlayer of Cross Linkable Ethylene Propylene Rubber (EPR)insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required. 543 Supplying & Fixing in position GI Box for installation of detectors on true Ceiling complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. 544 Supply, installation,testing and commissioning of EXIT light, self contained 6W luminaire complete with flush mounting frame ,sign label,fluorescent tube and battery and with label EXIT/RIGHT/LEFT/UP/DOWN as required.. 545 Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required. 546 Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required. 547 Supplying, installation, testing & commissioning of digital audio amplifier 150 Watt, 25V rms operating at 240 Volt AC Supply complete as required. 548 SITC of 1X500W/480W Class-D Amplifier with 2 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection 549 Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required. 550 Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. 551 speaker cable Two pair, 2-core, 1.5 sqmm 552 Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. 553 UPS & INVERTERS 554 Supply, installation, testing and commissioning of 10 kVA UPS, 3 phase (415 V + 15%) Volts input & 3 phase output (440 V + 1%), 50 Hz, 100% IGBT inverter & converter, Input harmonic Current THD 3% typical at 100% load, 6% maximum at 50% load and 30 min battery backup for UPS along with battery cabinet complete in all respect including supporting steel structure for UPS and Battery as required. Quotedprice shall be inclusiveof approved rating single core copper conductor cable connecting UPS and batteries. 555 EXTERNAL LIGHTING 556 Pole Light -Pole mounted - Lumen Package -4000/6500/7200/9200 lm- Minimum System Efficacy - 120 lm/W 557 Bollard - Surface mounted - Lumen Package - 300/400 lm - Minimum System Efficacy - 35 lm/W 558 Supply, Installation, Testing & Commissioning of Recessed Inground Up Light fixture 10 Watt LED , integral driver, protection IP 66, CLASS I as complete as required. (Tree Up Lighting) 559 Supply, installation, testing & commissioning of LED Post Top Luminaire consuming a system wattage of 36 - 42W & the luminaire shall be with system efficacy >75lm/W. Housing: Die Cast Aluminium , IP66 ,The operating CCT shall be 5700K with CRI of ≥70. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD ≤ 10% & PF ≥ 0.9, 50,000 Hrs LED Life with L70 Criteria.The LED Driver shall be easily avaiable in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 4KV.The luminaire shall be with following certifications: LM79& LM80 issued by LED manufacture along with Photo Biological Safety Standard. CAT REF: LT Primus PT 40Wor approved Equivalent. 560 Height = 5 MetresTop dia = 70mmminBottom Dia = 130mm minThickness =3mmSingle arm pole suitable for mounting of with base plate of size 200 mm x 200 mm x 12 mm thick, suitable for mounting of light fixture 561 Height = 6 MetresTop dia = 70mmminBottom Dia = 155mm minThickness =3mmSingle arm pole suitable for mounting of with base plate of size 260 mm x 260 mm x 16 mm thick, suitable for mounting of light fixture 562 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 563 63 mm dia (OD-63 mm & ID-51 mm nominal) 564 120 mm dia (OD-120 mm & ID-103 mm nominal) 565 EXTERNAL LIGHTING PANELIncoming :One (1) No 100 Amp. 4P MCCB of 25KABreaking capacity Metering :One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch.One (1) No. (0-100A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc.One (1) No. of Phase Indication Lamp each incomingBus Bar :One (1) No. 120 Amp.TPN aluminimum bus bar of suitable length.Outgoing :10 No.16 Amp DPMCB. (10 KA)SPARE & SPACE - 2 NoPanel described as above 566 SUBHEAD IV-MISCELLANEOUS 567 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required. 200mm Dia200mm dia 568 SUBHEAD V-EXTERNAL LIGHT 569 Conical Arch Street Lighting Pole of 6000mm Height suitable for mounting street light luminaires, made out of hot rolled steel grade E250, as per IS 2062:2011 and designed suitably for wind speedupto 50m/s wind conforming to IS 875: PART -3:1987. The perfect conical profile extends from the square base plate of MS (grade E250) of size 300mmx300mm, 16mm thick and facilitated with 4 elongated slots 48mm x 24mm at CC 215mm to suit the 500mm, J-type, M20 bolts (Grade 4.6). The cable entry hole Ø70mm is provided at the centre of the baseplate. The continuously tapered pole shall have top Ø 70 mm and bottom Ø 155 mm, 3mm thick suitable to mount an artistically designed and angularly curved arm bracket that suits the conical form factor of the pole. The pole should be Arched on the top to mount the luminaire with the help of bracket. A base compartment for weather proof control box is provided at a height 300mm above the base plate with a die cast door contoured to the poless shape housing the gear tray, prewired with 2.5 Sq.mm cable, Siemens/Anchor make MCB, terminal connectors for loop in loop out arrangement. The make of poles should be as per Ligman/RR Ispat/Klite. The surface preparation of the pole & components shall be done by shot blasting which is environmentally safe eliminating the chemical and acid use and ensuring the thorough removal of impurities like, rust, oxides and other unwanted particles from the surface for high standard coating. The surface finish of the pole shall be Zinch rich primer coat & pure polyester powder coating providing 60 Microns DFT. with KL 4392 Avenue 100, Dimension 526x174 x 90 mm wattage upto 100w LED 570 Supply, Installation, Testing and Commissioning of LED RGB / RGBW flood lighting luminaire for facade lighting with Die-cast aluminium housing, powder-coated finish, of following wattage. Luminaire shall be capable of producing dynamic color changing light for with 16 million colors by DMX / Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100-270VAC, 50Hz with powerfactor > 0.9. Fixture shall be suitable to operate at an ambient temperature range of -10°C to + 50°Cand shall be IP65 and IK06 rated. Life time shall be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS (IS10322 and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. 30 W 571 Supply, Installation, Testing and Commissioning of LED RGB / RGBW Linear Wall Washer luminaire for Facade lighting with aluminium extruded housing, of following wattage. Luminaire shall be capable of producing dynamic color changing light with 16 million colors by DMX / Ethernet based control. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 VAC, 50 Hz, power factor > 0.9. Fixture shall be suitable to operate at ambient temperature range of-10°Cto+50°Cand shall be IP65 and IK06 rated. Life time should be at least L70 : 50000 burning hours at 50 C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required. 25 W 572 SITC OF DG SETS 573 Design, manufacturing, testing at works, supply of 3 Phase, 415V, 50 Hz and 1500 RPM Diesel Generator Set of following ratings. Engine shall be complete with turbo charger, base frame, lube oil system, Heat Exhanger (HE cooled), Control Panels, Electric Starter 24V DC, required batteries, battery charging alaternator, electronic governor, instrumentation, day service diesel fuel tank, exhaust silencers including insulation, engine mounted control panel with monitoring and alarm features, utility piping, anti-vibration pads, Alternator direct coupled to Engine along with static excitation system and AVR Panel, and all required accessories complete as required and as per the specifications. The scope of work shall not include AMF Panel, cabling and earthing. DG shall be procured to the standards as in MoEFCC notification No.Q-1s017losl 2OL2-CPW and GSR 804(E) dated 03.1 1 .2022 The DG Set shall be provided with genset controller for AMF,Auto-load sharing, and shall have electrical and mechanical parameter monitoring. The controller shall include following electrical protections - under & over frequency and voltage, overload (KW), overcurrent, short circuit, reverse power, excitation failure etc. 62.5 KVA(with Acoustic Enclosure) 574 Supply of 4mm thick MS diesel day oil tank duly painted with two coats of primer after pre-treatment, and one coat of synthetic enamel paint with manhole, inlet and outlet connections with gate valves, drain plug, piping between tank and engine incase of inbuilt day oil tank, vent, mechanical oil level indicator, low level/ high level alarms, including support arrangement etc. mounted on suitably painted MS staging to maintain gravity flow of diesel oil from tank to DG Set. 575 120 Litres Capacity for 62.5kVA DG set 576 Fuel Pipe Line & Misc. Items Works 577 Supply, installation, testing & commissioning of 40mm dia MS C Class fuel supply and return piping from diesel day oil tank to the DG Set, including all necessary fittings like tees, bends, ball valves etc. complete in all respects as per the specifications. 578 Supply, installation, testing & commissioning of 25mm dia MS C Class fuel supply and return piping from diesel day oil tank to the DG Set, including all necessary fittings like tees, bends, ball valves etc. complete in all respects as per the specifications. 579 Providing and fixing of Valves and NRV for fuel line of following sizes: 580 40mm ball valve 581 25mm ball valve 582 40mm NRV valve 583 25mm NRV valve 584 BOUNDARY WALL WITH GATES 585 CARRIAGE OF MATERIALS 586 Carriage of good earth by mechanical transport including loading, unloading and stacking (upto 20KM) 587 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. All kinds of soil 588 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 589 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 590 Centring and shuttering including strutting,propping etc. and removal of form for 591 Foundations, footings, bases of columns etc. for mass concrete. 592 Lintels, beams, plinth bams, griders, bressumers and cantilevers. 593 Columns,Pillars, Piers, Abutments, Posts and Struts 594 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 595 Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 596 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 597 All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum 598 All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum 599 Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 600 300 mm dia piles 601 Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid) 602 300 mm dia piles 603 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 604 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). 605 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 606 Hot finished welded type tubes 607 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 608 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 609 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 610 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 611 Painting with synthetic enamel paint of approved brand and manufacture of required color to give an shade. Two or more coats on new work including priming coat of ordinary paint approved brand. 612 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 613 Providing & fixing galvanized low carbon wire, anealed wire Chicken mesh formed by twisting two adjacent wires at least four times, forming a hexagonal shaped strong honeycomb mesh structure on joints of RCC & Brick work before plastering, of required gauge (not less than 21 gauge)and size with nails etc. complete as specified in drawing and as per the Direction of Engineer-in-charge. 614 Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with machine cut edges of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately). 615 White sand stone - 30mm thick gang saw cut stone 616 Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-incharge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid). 617 Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-incharge. 618 Applying breathable, non-reactive, antifungal, and water repellant Silane/Siloxane chemical as approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand and manufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approved chemical :12 Part of Turpentine oil), on the existing sand stone masonry surface with two or more coats to give uniform application of chemical on the surface, all complete as per direction of Engineer-In-charge (The rate is inclusive of all materials & labours involved except scaffolding). 619 ESS 620 Carriage of good earth by mechanical transport including loading, unloading and stacking (upto 20KM) 621 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 622 All kinds of soil 623 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 624 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 625 Supplying chemical emulsion in sealed containers including delivery as specified. 626 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 627 Diluting and injecting chemical emulsion for pre-constructional anti-termite treatment (excluding the cost of chemical emulsion) :Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. 628 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 629 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 630 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 631 Centring and shuttering including strutting,propping etc. and removal of form for 632 Foundations, footings, bases of columns etc. for mass concrete. 633 Suspended floors, roots, landings, balcnies and access platform. 634 Shelves (Cost in situ) 635 Lintels, beams, plinth bams, griders, bressumers and cantilevers. 636 Columns,Pillars, Piers, Abutments, Posts and Struts 637 Weather shade, Chajjas, corbels etc., including edges 638 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). 639 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 640 Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 641 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 642 All works upto plinth level 643 Concrete of M25 grade with minimum cement content of 330 kg /cum 644 All works above plinth level upto floor V level 645 Concrete of M25 grade with minimum cement content of 330 kg /cum 646 Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :300 mm dia piles 647 Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid) 648 300 mm dia piles 649 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 650 Cement mortar 1:6 (1 cement : 6 coarse sand) 651 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). 652 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100mm/125mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. 653 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 654 Hot finished welded type tubes 655 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 656 80x1.25 mm M.S. laths with 1.25 mm thick top cover 657 Providing and fixing ball bearing for rolling shutters. 658 Extraforprovidingmechanicaldevice chain andcrankoperation for operating rolling shutters. 659 Exceeding 10.00 sqm and upto 16.80 sqm in the area. 660 Extra for providing grilled rolling shutters manufactured out of 8mm dia.M.S. bar instead of laths as per design approved by Engineer-in-charge.(area of grill to be measured). 661 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 662 25 mm thick 663 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 664 15 mm cement plaster on the rough side of single or half brick wall of mix : 665 1:6 (1 cement: 6 coarse sand) 666 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 667 6 mm cement plaster of mix : 668 1:3 (1 cement : 3 fine sand) 669 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 670 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 671 Painting with synthetic enamel paint of approved brand and manufacture of required color to give an shade. 672 Two or more coats on new work including priming coat of ordinary paint approved brand. 673 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 674 Providing & fixing galvanized low carbon wire, anealed wire Chicken mesh formed by twisting two adjacent wires at least four times, forming a hexagonal shaped strong honeycomb mesh structure on joints of RCC & Brick work before plastering, of required gauge (not less than 21 gauge)and size with nails etc. complete as specified in drawing and as per the Direction of Engineer-in-charge. 675 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineering-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineering-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65mm. 676 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : 677 In 75x75 mm deep chase 678 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 679 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) : For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 680 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). 681 Powder coated aluminium (minimum thickness of powder coating 50 micron) 682 Providing and fixing 6 mm thick high performance toughened glass from approved manufacturer complete in all respects as per direction of the Engineer-in-charge. (Required properties Solar factor 0.43, U-Value (W/sq.m-K) 5.6, Visible light transmittance 0.43). The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 683 GUARD ROOM 684 Carriage of good earth by mechanical transport including loading, unloading and stacking 685 (upto 20KM) 686 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 687 All kinds of soil 688 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 689 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. 690 Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% 691 Diluting and injecting chemical emulsion for pre-constructional anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration. 692 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 693 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 694 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 695 Centring and shuttering including strutting,propping etc. and removal of form for 696 Foundations, footings, bases of columns etc. for mass concrete. 697 Suspended floors, roots, landings, balcnies and access platform. 698 Shelves (Cost in situ) 699 Lintels, beams, plinth bams, griders, bressumers and cantilevers. 700 Columns,Pillars, Piers, Abutments, Posts and Struts 701 Edges of slabs and breaks in floors and walls Under 20 cm wide 702 Weather shade, Chajjas, corbels etc., including edges 703 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth & above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. 704 Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 705 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 706 All works upto plinth level 707 Concrete of M25 grade with minimum cement content of 330 kg /cum 708 All works above plinth level upto floor V level 709 Concrete of M25 grade with minimum cement content of 330 kg /cum 710 Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 711 300 mm dia piles 712 Extra over single under ream for providing additional bulbs in under reamed piles, under specified diameter(only the nos. of extra bulbs are to be paid) 713 300 mm dia piles 714 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 715 Cement mortar 1:6 (1 cement : 6 coarse sand) 716 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). 717 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 718 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 719 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 720 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): 721 Rectangular or square. 722 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 723 1.0 mm thick 724 Providing and fixing approved brand and manufacture SS 304 Lever Handle D-type, 22mm dia fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 725 Providing and fixing approved brand and manufacture SS 304 grade SS 304 grade Mortise Dead Lock with 60mm Backset fixed fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 726 Providing and fixing approved brand and manufacture SS 304 grade Tower bolt 250mm long with 10mm dia fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 727 Providing and fixing approved brand and manufacture SS 304 grade wall mounted door buffer fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 728 Providing and fixing approved brand and manufacture SS 304 grade Door Stopper - door mounted hanging type fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 729 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 730 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm 731 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm 732 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade 733 Area of slab upto 0.50 sqm 734 Area of Slab over 0.50sqm 735 Extra for providing edge moulding to 18mm thick marblestone counters, Vanities etc. including machine polishing to edge to give high glossfinishetc.completeasper designapprovedbyEngineer-in-Charge. 736 Granite work. 737 Extra for fixing marble /granite stone over and abovecorresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. 738 15 mm cement plaster on the rough side of single or half brick wall of mix : 739 1:6 (1 cement: 6 coarse sand) 740 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 741 6 mm cement plaster of mix : 742 1:3 (1 cement : 3 fine sand) 743 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 744 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 745 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 746 Painting with synthetic enamel paint of approved brand and manufacture of required color to give an shade. 747 Two or more coats on new work including priming coat of ordinary paint approved brand. 748 Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 749 Providing & fixing galvanized low carbon wire, anealed wire Chicken mesh formed by twisting two adjacent wires at least four times, forming a hexagonal shaped strong honeycomb mesh structure on joints of RCC & Brick work before plastering, of required gauge (not less than 21 gauge)and size with nails etc. complete as specified in drawing and as per the Direction of Engineer-in-charge. 750 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 751 12.5 mm thick tapered edge gypsum moisture resistant board 752 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 753 With 15 mm thick Tegular edged light weight calcium silicate false ceiling tiles 754 Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 gsm/sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross T of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main T at 600mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 x mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. 755 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineering-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineering-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge :With average thickness of 120 mm and minimum thickness at khurra as 65mm. 756 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase 757 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 758 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and paneling to be paid for separately) :For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) 759 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). 760 Powder coated aluminium (minimum thickness of powder coating 50 micron) 761 Providing and fixing 6 mm thick high performance toughened glass from approved manufacturer complete in all respects as per direction of the Engineer-in-charge. (Required properties Solar factor 0.43, U-Value (W/sq.m-K) 5.6, Visible light transmittance 0.43). The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 762 UNDER GROUND TANK (UGT) 763 Carriage of good earth by mechanical transport including loading, unloading and stacking 764 (upto 20KM) 765 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 766 All kinds of soil 767 Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. 768 All kinds of soil (From 1.5 to 3 m depth) 769 All kinds of soil (From 3.00 to 3.50 m depth) 770 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 771 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 772 Centring and shuttering including strutting,propping etc. and removal of form for 773 Foundations, footings, bases of columns etc. for mass concrete. 774 Walls (any thickness) including attached pilasters. Butteresses, plinth and string courses etc. 775 Suspended floors, roots, landings, balcnies and access platform. 776 Shelves (Cost in situ) 777 Lintels, beams, plinth bams, griders, bressumers and cantilevers. 778 Columns,Pillars, Piers, Abutments, Posts and Struts 779 Stairs, (excluding landings) except spiral-staircases 780 Edges of slabs and breaks in floors and walls 781 Under 20 cm wide 782 Weather shade, Chajjas, corbels etc., including edges 783 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 784 Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 785 Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 786 All works upto plinth level 787 Concrete of M25 grade with minimum cement content of 330 kg /cum 788 All works above plinth level upto floor V level 789 Concrete of M25 grade with minimum cement content of 330 kg /cum 790 Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry with 150mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). 791 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 792 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 793 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 794 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): 795 Rectangular or square. 796 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 797 1.0 mm thick 798 Providing and fixing approved brand and manufacture SS 304 Lever Handle D-type, 22mm dia fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 799 Providing and fixing approved brand and manufacture SS 304 grade SS 304 grade Mortise Dead Lock with 60mm Backset fixed fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 800 Providing and fixing approved brand and manufacture SS 304 grade Tower bolt 250mm long with 10mm dia fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 801 Providing and fixing approved brand and manufacture SS 304 grade wall mounted door buffer fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 802 Providing and fixing approved brand and manufacture SS 304 grade Door Stopper - door mounted hanging type fixed with SS screws etc. complete in all respects as per manufacturers specifications & as directed by Engineer-in-charge. 803 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 804 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 805 Hot finished welded type tubes 806 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 807 25 mm thick 808 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 809 Extra for pre finished nosing to treads of steps of Kota/Sand stone. 810 Extra for Kota/Sand flooring in treads of steps and risers using single length above normal size up to 2.00 metre . 811 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 812 Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 813 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. 814 12mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 815 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). 816 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) 817 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 818 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 819 Painting with synthetic enamel paint of approved brand and manufacture of required color to give an shade.Two or more coats on new work including priming coat of ordinary paint approved brand. 820 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm 821 Providing & fixing galvanized low carbon wire, anealed wire Chicken mesh formed by twisting two adjacent wires at least four times, forming a hexagonal shaped strong honeycomb mesh structure on joints of RCC & Brick work before plastering, of required gauge (not less than 21 gauge)and size with nails etc. complete as specified in drawing and as per the Direction of Engineer-in-charge. 822 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineering-charge.(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineering-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : 823 In 75x75 mm deep chase 824 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 825 Road Work 826 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 827 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 828 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 829 All kinds of soil 830 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 831 Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). 832 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 833 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBRValue-30 834 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 835 Providing and laying 400 micron thick PVC Sheet on WBM Surface complete as per direction of engineer-in-charge. 836 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).(Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). 837 Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) 838 Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. Using grade A sealing compound conforming to IS: 1834. 839 Painting runway/taxi track/apron marking with adequate no. of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge i/c cleaning the surface of all dirt, scales, oil, grease and other foreign material etc. and lining out complete 840 New work (Two or more coats) 841 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line , level and curvature jointed with cement mortar 1:3 (1 cement : 3 coarse sand) including making joints with or without grooves (thickness of joints except sharp curve shall not be more than 5mm) including making drainage opening wherever required complete etc. as per direction of engineer-in-charge (length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by engineer-in-charge). 842 FOOTPATH & STONE BENCHES 843 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. 844 All kinds of soil 845 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 846 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 847 Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth & above plinth level. 848 Thermo-Mechanically Treated bars of grade Fe-500D or more. 849 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but , excluding cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). 850 Providing and fixing 70 mm thick Lalitpur Grey sand stone over prefix sand stone legs including polishing, pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. 851 Providing and fixing 10x10x7.50 cm Granite stone block hand cut and chisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1 cement : 4 coarse sand) with joints 10mm wide filled with same mortar including ruled pointing etc. complete as per direction of engineer-in-charge. 852 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: 853 All kinds of soil 854 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead upto 50 metres. 855 Extra for compaction of earth work in embankment under optimum moisture conditions to give at least 95% of the maximum dry density (proctor density). 856 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. 857 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBRValue-30 858 Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 859 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern. 860 HORTICULTURE & LANDSCAPING WORK 861 Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). 862 Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment). 863 Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : 864 Screened through sieve of I.S. designation 20 mm 865 Screened through sieve of I.S. designation 16 mm 866 Screened through sieve of I.S. designation 4.75 mm 867 Fine dressing of the ground 868 Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Officer-in-charge (Cost of sludge, dump manure and / or good earth to be paid separately). 869 Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.. 870 Providing and laying Neelgiri/Korean grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light watering with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge. 871 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : 872 Holes 60 cm dia, and 60 cm deep. 873 Holes 45 cm dia, and 45 cm deep. 874 TREE PLANTS 875 Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 876 Providing and stacking of Bauhinia purpurea (Kachnar) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 877 Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. 878 Providing and stacking of Mimusops elengi (Maulsri) of height 180-195 cm., well developed with thick stem in big in big size HDPE bag as per direction of the officer-in-charge. 879 Providing and stacking of Callistemon lanceolatus of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 880 Providing and stacking of Saraca indica (Sita Ashok) of height 105-120cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 881 GROUND COVERS PLANTS 882 Providing and stacking of Tradescantia, full of leaves in Earthen Pot/Plastic Pot of size 15 cm. as per direction of the officer-in-charge. 883 Providing and stacking of Wedelia trilobata,full of leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 884 Providing and stacking of Syngonium golden of height 30-45 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 885 SHRUBS AND PERINNIAL HERBS 886 Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. 887 Providing and stacking of Cassia biflora of height 90-105 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge. 888 Providing and stacking of Ficus panda of height 60-75 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge. 889 CREEPER PLANTS 890 Providing and stacking of Quisqualis indicia of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 891 Providing and stacking of Clerodendrum splendens of height 30 cm to 45cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 892 FURNITURE AND FURNISHINGS 893 Cafe Table, S.S. Pipe Frame, PLPB Edge Banded Top, 38mm Thick, Size in mm - 900mm (Dia.) 894 Café Chair, PP Seat & Back 895 DiningTable, Powder Coated + Chrome Plated Pipe Frame, PLPB Edge Banded Top, 25mm Thick, Size in mm - 1500 X 900 896 Medium Back Chair, PU Arms, Silver Powder Coated Pipe Frame,Gas Lift, Powder Coated Base, Seat Back Leatherite Tapestry. 897 Reception Table, Particle Board Top 898 2 Seater Sofa With Wooden Frame, Powder Coated Leg, Twin Colour Leatherette Tapestry Size in mm - 1180 (L) X 835 (D) X 785 (H) 899 Centre Table, 18mm PLPB Top, Annodize Aluminium Section Frame 900 Corner Table, MDF Top With Veneer Polish, MS Gold Finish Leg 901 1 Seater Sofa With Wooden Frame, Powder Coated Leg, Twin Colour Leatherette Tapestry Size in mm - 810 (L) X 835 (D) X 785 (H) 902 Medium Back Chair, Wooden Frame, Cushion Arm, Synchro Knee Tilt, Gas Lift, Aluminium Base 903 Visitor Chair, Wooden Frame, Cushion Arm, Chrome Plated pipe stand 904 Executive Table, PLPB Top, Flaper Box, Extruded Aluminium Profile 905 Conference Table, Particle Board Edge Banded Top 906 Medium Back Chair, PP Cushion Arm, Swivel Tilt, Gas Lift, Nylon Base 907 Executive Table, Particle Board Top, Fixed Metal Pedestal, Metal Frame, Powder Coated 908 Visitor Chair, Cushion Arm, PU Moulded Seat Back, Chrome Plated Pipe stand 909 Bunk Bed, CRCA Pipe Frame, Powder Coated, PPCP Shoes, With 12mm Plywood, Without Mattress Uppder Size- 1950 X 965 Lower Size- 1950 X 1250 910 Study Table, Particle Board Top, MS Powder Coated Legs 911 METAL BED 912 WARDROBE WITH MIRROR ,PLPB BOARD 913 SUBHEAD I-EARTHING 914 Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. 915 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required 916 Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and two earthing lead of two no. 8 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in 917 all respects. 918 Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 919 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 920 50 sqmm3.5 core 921 6 sqmm3 core 922 6 sqmm2 core 923 Supply & fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per dire 924 50 sqmm3.5 core 925 6 sqmm3 core 926 6 sqmm2 core 927 Supplying and fixing of Palm / pin type copper tin plated cables sockets (lugs) to the cable leads, insuslating with tape and making of connections etc. complete in all respects as per direction of Engineer-Incharge. 928 50 sqmm 929 GST Extra as per applicable