BRR : 9528620 Tender For Provision Of Cgsd (Kochi) At Willingdon Island, Kochi; 1 SCHEDULE A Part - I (BUILDING & STRUCTURE WORKS)Details of prepriced schedule is given in tender documents. 2 SCHEDULE A PART-II ( SITE CLEARENCE/DEVELOPMENT & EARTH WORKS) Details of prepriced Schedule is given in tender documents. 3 SCHEDULE A PART-III (INTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents. 4 SCHEDULE A PART-IV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents. 5 SCHEDULE A PART-V (FIRE FIGHTING)Details of prepriced Schedule is given in tender documents. 6 SCHEDULE A PART-VI (ROAD/PATH/ HARD STANDING/CULVERT)Details of prepriced Schedule is given in tender documents. 7 SCHEDULE A PART-VII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents. 8 SCHEDULE A PART-VIII (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents. 9 SCHEDULE A PART-IX (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents. 10 SCHEDULE A PART-X (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents. 11 SCHEDULE A PART-XI (COMPOUND WALL) Details of prepriced Schedule is given in tender documents. 12 SCHEDULE A PART-XII (ORGANIC WASTE CONVERTER AND SMART ENERGY METER) Details of prepriced Schedule is given in tender documents. 13 SCHEDULE A PART -XIII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the rate shall be quoted by the bidder. 14 INTERNAL WATER SUPPLY S & F for 15 mm dia bore CP two way bib cock with CP wall flange (Make : Jaquar Model No. OPP15041PM / Eqvlt in Kohler/Grohe), cast copper alloy, screwed down high pressure with crutch screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. 15 S & F for 15 mm dia bore CP bib cock with CP wall flange (Make : Jaquar Model No. OPP15037PM / Eqvlt in Kohler/Grohe), cast copper alloy, screwed down high pressure with crutch, screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. 16 S & F for 20 mm bore concealed Stop cock reqular brass body with spindle extnwith Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-083CQT & ALD-089CQT)(Make : Jaquar Model No. ALD 089 CQT/ Eqvlt in Kohler/Grohe), cast copper alloy, screwed down high pressure with crutch , screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. 17 S & F for 25 mm dia bore concealed Stop cock reqular brass body with spindle extn with Flush Cock & Wall Flange 25mm Ceramic Disc Cartridge) with Plain Knob (Make : Jaquar Model No. ALD 081/ Eqvlt in Kohler/Grohe), cast copper alloy, screwed down high pressure with crutch, screwed both ends for CPVC pipes or for union and fixed complete all as specified and directed by Engr-in-charge. 18 S & F 20mm bore CP angular stop cock with CP wall flange (Make : Jaquar Model No. CQT 23053 / Eqvlt in Kohler/Grohe), cast copper alloy, screwed down, high pressure with crutch, screwed both ends for iron pipe or for union and fixed 19 S & F for 100 mm overhead shower rose round shape single flow (ABS Body chrome plated with gray face plate (Make : Jaquar Model No. 1989 with SHA 479L300S / Eqvlt in Kohler/ ESS ESS) with Shower Arm ø20mm & 300mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Stainless Steel connected to pipe complete all as specified and directed by Engr-in-charge. 20 COOLING APPLIANCESDesign, Supply, Installation, Testing and Commissioning of Invertor Type Floor Mounted Packaged AC Units including indoor and outdoor unit complete of specified capacities, combination of energy efficient Inverter compressor plus fixed compressors, nominal capacity condensing unit with all standard fittings, safety devices, like HP/LP cutout, single phase preventor, overload relays, R-410A Gas, vibration isolation pads etc. Suitable to work till 50 Deg ambient, Blue Fin Condensor and Corrosion Resistant Body, Wide Voltage Range 360V - 440V, The quoted rate shall include Group controller also asrequired for controlling AC from a single point and timer option for load sharing of AC units complete all as specified and as directed by Engineer - in - charge, of following capacities.Note: Design report shall be submitted before execution of work at site by the contractor to GE for his scruitiny/comments and further submitted to AO for his approval.Make: Blue Star/Daikin/Haeir/Godrej/Voltas/Equivalent. 21 a) 22 TR Inverter Package AC Units 22 b) 16.5 TR Inverter Package AC Unit 23 BLANK 24 BLANK 25 BLANK 26 Supply, Installation and Testing of Refrigerant pipingwith necessary clamping (suction & Discharge) Hard/Soft drawn Copper tube of suitable sizes, with copper elbows, tees, Tubular Nitrile Insulations etc as required complete all as specified and as directed by Engineer - in - charge. 27 S & F Control Cabling B/W Indoor & Outdoor units 28 M & L Refrigerant Gas - R410A 29 Supply, Installation and Testing of Hard PVC drain piping. Drain piping with Tubular Nitrile Rubber Insulation: complete in all respects, well clamped till drain Points complete all as specified and as directed by Engineer - in - charge. For All Units 30 DUCTINGSupply, fabrication, installation, testing of GI rectangular ducts, complete with all fittings such as tee, bends, special off shoots, inspection doors, transformation pieces etc. as required as per IS 655 including suspension and supporting arrangement for plenum, duct etc. required complete all as specified and as directed by Engineer - in - charge. 31 a) Using 0.63 mm (24 Gauge) GI sheet 32 b) Using 0.80 mm (22 Gauge) GI sheet 33 c) Using 1.00 mm (20 Gauge) GI sheet 34 DUCT INSULATION & LININGSupply and Installation of Acoustic Insulation of ducts using 9MM Open Cell Nitrile Rubber, well adhesived, 150 - 180 Kg/cm2 complete all as specified and as directed by Engineer - in - charge. 35 Supply, installation & testing of Thermal Insulation of ducts using 9MM Closed Cell Nitrile Rubber, well adhesived, 40-60 Kg/cm2 complete all as specified and as directed by Engineer - in - charge. 36 S & F Canvas Connection 37 AIR DISTRIBUTION PRODUCTSSupply and Fixing of Powder Coated Aluminium Grills/ Diffusers (Supply/ Return) complete all as specified and as directed by Engineer - in - charge. 38 S & F Collar Dampers 39 Supply and Installation of Fire Dampers complete all as specified and as directed by Engineer - in - charge. 40 Supply, Installation, Testing and Commissioning of Heater Bank Plus Humidistat Arrangement complete all as specified and as directed by Engineer - in - charge. 41 Supply and fixing, testing and commissioning water coolerhaving stainless steel body with inbuild purifier HIMA 7 NHC, dispencing capacity 125 ltr/hr and storage tank capacity 40 ltr normal and 40 cold electric driven (single phase), 230 volt, AC power supply with all connecting accessories complete all as specified and directed. 42 Supply and fixrefrigerator, electric driven (single phase), 220 V,50 HZ, capacity 195 Litres, 3 Star rated direct cool inverter, single door all as specified and directed by the Engineer-in-Charge. 43 Supply and install, testing and commissioning of split type air conditioner 1.5 TR Capacity of invertertechnology 5 star rating with cordless remote control single phase 240 volts complete with all accessories such as indoor and outdoor units and refrigerent tubing of adequete length as required at site indoor mounting plate, duly powder coated fixing with anchor bolts at any height, drain pipe of suitable size brought to ground level from any height, initial filling of refrigerent gas including making round hole on existing wall for taking up refrigerent tubing, drain pipe, cables, etc and making good the disturbed surface by matching with existing adjoining surface complete all as specified and directed (Cooling appliances- qty 4, Air conditioning- qty 10) 44 Supply and fix Voltage stabilizer 3 KVA for automatic operation, single phase naturally air cooled indoor type, wall mounted & designed for input variation between 170 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% 45 Supply and fix Voltage stabilizer 4 KVA for automatic operation, single phase naturally air cooled indoor type, wall mounted & designed for input variation between 170 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% (Cooling appliances-qty4, Air conditioning- qty 10) 46 AIR CONDITIONINGSupply and install,Testing & commissioning of split type air conditioner 2 TR capacity of inverter technology 5 star ratingwith cordless remote control, single phase 240 volts complete with all accessories such asindoor and outdoor units and refrigerent tubing of adequete length as required at site, indoor mounting plate, duly powder coated fixing with anchor bolts at any height, drain pipe of suitable size brought to ground level from any height, initial filling of refrigerent gas including making round hole on existing wall for taking up refrigerent tubing, drain pipe, cables etc and making good the surace by matching with adjoining surface complete all as specified and directed. 47 Supply and fix Voltage stabilizer 5 KVA for automatic operation,single phase naturally air cooled indoor type, Wall mounted type & designed for input variation between 170 V to 280 V with output voltage stabilized at230 V with accuracy of ± 2.5% 48 INTERNAL ELECTRIFICATIONS & F LED Mirror light 1 x 5W LUMOS ECCO 1 feet Make: Luker or Equivalent 49 S & F modular MCB DBOx 3 Pin Socket with MCB SP 20 Amp, 240 V including plastic enclosure as per manufacturer instruction fixed on wall surface complete for Air conditioner all as specified and as directed. (Make:-Havells, Model-DHDMCSN0251016 or equivalent) 50 Supply and fix Air circulator of 600 mm sweep AC single Phase. 230V, 1440 RPM complete all as specified and as directed. (Make: Havells model, Turbo Force Wall or equivalent) 51 S & FVertical triple pole & neutral (VTPN), double door, 16-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FPMCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. 52 S & FVertical triple pole & neutral (VTPN), double door, 4-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FPMCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed. 53 M & L for Flame ProofMCB Distribution board SPN 12 way, with case iron body, powder painted, with 100 Amps rated bus bar etc. including provision of one 32 Amps SPN MCB as incoming and 6 Amps SP MCB -10 Nos as outgoingcomplete all as specified and as directed. 54 M & L for Flame ProofMCB Distribution board SPN 8 way, with case iron body, powder painted, with 200 Amps rated bus bar etc. including provision of one 32 Amps SPN MCB as incoming and 6 Amps SP MCB- 6 Nos as outgoingcomplete all as specified and as directed. 55 Supply and fix Engage light with Green & Red LED complete all as specified and as directed 56 Supply and fix of CS mounted high intensity LED search light, long range, manually swivel in all direction, 250 W, minimum range 700 meters, Single, LED Efficiency> 140 lm/w, PF> 0.95, CCT 5500K - 6500K, Optical grade PMMA/PC lens/reflector efficiency>95%, multiple circuit to avoid complete run down, anti UV, narrow beam 5 degree, die cast LM6 body with air fins, powder coated, constant current, an average lux at 10 meter - 8000 lux with circle of approx 600 mm, working temp: -20 to +60 degree C, input Volt 100-300 VAC, 50 Hz, PF >0.95, IP-66, confirming to LM79/ LM80 and type tested as per IS: 10322/ IS: 13383, BIS approved and Govt lab tested for lux intensity. The search light is completed with manual revolving CS stand D20cm x H15cm (min.) with 3 nos. foundation holes for mounting of searchlight on watchtower structure, manual rotation of light on horizontally 360 degree with 45 degree tiltable with provision of both instant locking arrangement at desired position. Model No. CS-LRFLL-25PC25 of KALIN make or equivalent 57 Supply, install, testing and commisisong of outdoor floor/wall mounted thermoplastic polycarbonatefeeder pillar panel, Enystar EmptyEnclosures, IP-65, weatherproof, corrosion free, Halogen and Silicon Free, Frame retardant with Opaque Lid Size-[276 x 546 x 186]mm and Transparent Hinged Lid, completed all as specified and directed. 58 M & L for TV socket module metal flushed including flushed Box cover plate Box for 2 way module complete all as specified. 59 M & L for telephone jack with module metal flushed including flushed Box cover plate Box for 2 way module complete all as specified. 60 Supply and lay coaxial cable for TV Cabledrawn through conduit 61 S & F flame proof exhaust fan 300 mm sweep, single phase, 1440 RPM complete all as specified and as directed. 62 FIRE FIGHTINGSupply and fix Foot Valve conforming to IS 4038, 100 mmdia. 63 Supply and fix Foot Valve conforming to IS 4038, 150 mmdia. 64 Supply and fix Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 100 mm dia bore and fixing up in Cast Iron Water supply mains of size 100 mm dia. 65 S & F sprinkler flexible drop pipe 1 mtr long. 66 S & F sprinkler rossette 25 mm dia. 67 Supply and installation, testing and commissioning of Analog Addressable type Active Loop Repeater (Loop power/external power) Fire terminal with inbuit turbo isolator, Backlit LCD Display 6x40 characters display, having Controls For Reset, Mute, Accept, Silence alarms and Self Test, with programmable free keys and Duly Approved byEN54/LPCB/VDS/FM Make: SIEMENS/NOTIFIER/BOSCH 68 M & L for Low smoke Zero helogen flame retardent fire alarm cable2 core, 1.5 mm² copper conductor confirming to BS7629-I, BS6387 & rated for 500 v grade having plaine sraded copper coductutor with priming insulation of glass mica fire resistance tape & secondery insulation of high performancesilicon rubber with electrostatic screen of aluminium fire barrier Type LT53 outer sheath confirming to BS 7655, red in colour drawn through & including concealed steel conduit including laying,fixing,connecting complete all as specified and directed. 69 Staircase signage down of make bajaj cat part no. 111499 model no. DSDWBB 3W double side display for staircase downwards (with 2 hours built in battery backup) complete all as specified and directed at site complete all as specified and directed. 70 S & F wall mounted LED emergency Exit signage luminaire Lit up using regular mains supply comes with a unique rechargeable Ni-Cd battery capable of emergency back up upto 05 hours(Cat No. 220211 Make Bajaj or equivalent to CG/Havells. 71 Supply, Installation, test and Commissioning CPRI APPROVED factoryfabricated, indoor type, LT panel board , made out of 2 mm thick CRCA Sheetsingle door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and comprising of the following:- Make of MCCB/MCB -MDS/LEGRAND/L&T/HEGGER (Main Fire Fighting Panel)INCOMING(i) MCCB 4 Pole 400 amp 50 Hz, 415 V with rupturing capacity 35 KA with microprocessor based release - 01 No.(ii) Voltmeter Digital type 0-500 Volts range flush type with selector switch- 01 No.(iii) Aluminium Bus bar TPN - 600 amps- 1setOUTGOING(i) MCCB 3 Pole 200 amp 50 Hz, 415 V with rupturing capacity 35 KA with microprocessor based release- 02 No.(iii) MCB TPN 32 Amp - 03 Nos.(iv) 80 HP S/D soft STARTER- 02 Nos.(v) DOL STARTER 7.5 HP- 02 Nos.(vi) Motor Protection Relay32-88 amps- 2 nos. (vii) Motor Protection Relay2- 5.5 amps- 2 nos. (viii) On/Off/Trip Indication Lamps, 220 V AC- 6 nos.(ix) Start/Stop Push Button, 4 Nos. (x) Phase indicating lamps RYB for incoming and each outgoing connection.(xi) Digital type Ammeter 0- 150 amps with selector switch and CT coils of suitable capacity for incoming and each outgoing connection- 1 no. 72 M & L for coating and wrapping of under ground steel pipe buried in soil shall have protection against corrosion as per IS-10221.The coating and wrapping shall be carried out in systamatic manner to get uniform thickness of coating as per IS specification 73 Supply, Installation, test and Commissioning CPRI APPROVED factoryfabricated, Indoor type, LT panel board, made out of 2 mm thick CRCA Sheetsingle door withboth side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embeddedwith 50X50X6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete withinternal connection with suitable size of cable, cable lugs and cable glandsPCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation includingcomplete all as specified and & directedby Engr-in-charge comprising of the following :– ( Booster terrace pump panel)INCOMING:-(a) INCOMING MCCB 40 A 25 KA, 4 POLE- 01 No.(b) Busbar TPN of size 100 apms - 1 setOUTGOINGS:-(a) MCB 3 POLE TPN 32 Amps,10 KA-2 Nos.(b)DOL Starter for 7.5 HP Pump set-1 Nos.(c) Ammeter Class-1, digital panel mounting type 96mmx96mm L & T cat no WDS301FCA00 including CT 50X5 Amps 3 nos & selector switch-4 nos(d) Voltmeter Class- 1, digital panel mounting type 96mmx96mm L&T CAT NO.WDS301FEV00 & selector switch - 1 no.(e) LED TYPE indicator lamp 1 set (set of three for R,Y,B)(f) Mini protecrionRelay 4-11 amp - 1 nos. 74 Fire Extinguisher mechanical Foam type trolly mouted of 9 Liters capacity. Ceasefire 9 litrs fire Extinguisher AFFF Foam type, External Cartridge type, Pressure Guage Gross weight 14.6 Kg, empty weight5.6 Kg, Can height 611 MM, Diameter 175 MM, Discharge time less than 60 Secs controllable discharge mechanism, Minimum 6 Mtrs, Applicable on Class A, B, can construction deep down & CO2 Mig welded Valve Construction: Forging & Machining, Internal coating of can: Epoxy powder coating, External coating of can: Epoxy poyster powder coating sheet metal thickness 2.0MM,1 year warranty. Make Cease Fire Or Equivalent. (pol store) 75 Supply, Installation,Testing & commissioning of Carbon Dioxide (Co2) type fire extinguisher of 4.5 Kg confirm to IS: 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets. 76 Supply, Installation,Testing & commissioning ofDRY CHEMICAL POWDER (ABC) stored pressure type fire extinguisher of 6 Kg confirm to IS: 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets. 77 Supply and fixing single unit flame type detectors (Triple IR infrared flame detectors) Addressable type Flame detectors with UV/IR detection capacity (add up cost of module to be a complete set, the type of module shall be relaying type module) complete all as specified and directed 78 Supply and fixing,Test and Drain valve 65/50mm, forged brass body, brass chrome plated ball, 304SS stem with Polycarbonate sight glass, indicator and handle made of steel complete all as specified and directed 79 SPECIAL EQUIPMENTS FOR STORESDesign, manufacture, Supply, installation, testing and commissioning of Automated Storage and Retrieval System with storage racks, pallets, stacking crane, computer hardware with compatible inventory software as a turnkey solution complete all as specified and directed. Automated Storage and Retrieval System shall consist of computer controlled & PLC stacker crane driven system for automatically placing & retrieving materials from defined storage locations. The crane shall be capable of lifiting, stacking and retriveing the pallet loads weight upto 1125 Kg (max) complete all as specified and directed by the Engineer-in-Charge. Technical data for design of heavy duty ASRS:-(a) Dimensions:-Height:10 Mtrs for racking system which shall be designed and constructed to store the required no. and size of pallets.(b)Storage capacity:-Pallet Size: 1300 (W) x 1200(D) x 1250 (H) in mmPallet Nos.: 480Pallet load capacity: 1125 KgTotal capacity: 540 Tons(c) Stacker Crane: Double mast automated stacker crane for handling Pallet, size 1300mm(W) x 1200mm (D) x 1250mm (H) and pay load (including Pallet self weight) of 1125 Kg max. The stacker crane shall be capable of picking up the pallet from in-feed conveyor or loading station and stacking it into empty slots of racking system. Similarly, it shall also be capable of retrieving the palltet from racking system and putting it on the same conveyor or unloading station. Stacker crane will be mounted on rails at the bottom to traverse the length of the storage system. Top rails mounted on the racking system shall also support it. PMDC motars should be used with required counter weight for better efficiency of verticle travel.General technical parameters of stacker crane:Technical parameters/Type- Double Mast(i) Operation mode (Networking)- On-line automatic / Single automatic (Ground/Boarding) /Manual operation (Boarding) / Maintenance (ii) Communication Means- Wireless 80 (iii) Power supply mode- 380 to 415 V, 50 Hz, three phase five wire (iv) Addressing mode- Horizontal and verticle operation: photo electrical sensor + bar code scanners(v) Positioning / Reduction accuracy (mm) level- lifting ± 3 - 5, Fork : ± 3(vi) Fork unit- 1 Double deep fork(vii) Load unit- MS Pallet (viii) Total Height- 10 Mtr(ix) The normal lifting speed (m/min) - 10 MPM(x) The normal running speed (m/min) - 65 MPM(xi) Rated load- 1125 Kg(xii) Receipt equipment fixed platform/conveyor/lifting /platform(electric/manual)- Conveyor(d) Pallets: to stack and retrieve the pallet weighing up to loaded pallet weight 1125 Kg at height up to the last loading level in the racking system. It should have retrieval mechanism to enable stacking & retrieval of pallet from either side of the rack and also to pick up the load directly from the loading station.Pallet Details:-(i) Dimensions - 1300mm(W) x 1200mm(D)(ii) Pallet height- 1250 mm(e) Racking system:- Two single aisle having two row racking system each with 05 verticle levels for storage of material. Racking for double deep type storage of 480 Pallet of size 1300mm(W) x 1200mm (D) x 1250mm (H). Loaded pallet weight: Pay load with pallet 1125 Kg max. System details:-Working aisle -01 Nos. (Double deep)Store rack -24 Nos./RowTotal rack in 1 aisle-24 (Left) + 24 (Right)= 48 Nos.No. of level- 5 Nos/RackTotal Pallet-48 x 5 x 2 = 480 Nos.Load capacity- 1125 Kg/LevelDouble mast stacker crane-01 No. 81 (f)Aisle Equipment:-This will consist of electrical as well mechanical aisle equipments and willl be designed as per the pallet requirement. The mechanical Aisle equipment of bottom rail shall consist of I Beam and will be provided with adjustable calmps for holding the rail in position to ensure proper alignment. Top rail shall be mounted on the racking. The electrical aisle equipment shall consist of power rail (fully enclosed bus bar having 7 pole system), which is mounted on the racking system below the first loading level.(g) Details of rack members:-The racking system shall consist of cold-rolled steel sections as per manufacturers design to accommodate and store pallets and connected systems.(h) Loading- unloading station/ Conveyor(i) Pallet Load 1125 Kg max.(ii) Bearing- SKF Equivalent make(iii) Motor- Seimens/Sew Euro Drive/Nord Sew/ Bonfiglioli or equivalent(iv) Gear Box- Bonfiglioli Make or equivalent(v) V.F.D.- Yashkawa make or equivalent(j) All steel surface shall be powder coated finish with 8 tank treatment process.(k) Maintenence: The annual maintenence of complete ASRS system during the defect liability period of two years shall be included in the rate quoted for the system and the AMC contract duly signed with the manufacturer of the ASR system shall be submitted at the time of handling over the system. The AMC shall include all spares and consumables etc required during the period of two years and nothing extra shall be paid on this accountNote- 1)Mechanical safety provision (i) End of aisle shock absorbers / bumpers for stacker crane.(ii) End of travel buffer for the lifting crane.(iii) Safety catches on lifting carriage.(iv) Anti-tilt mechanism for the stacker crane. An additional antifall device must be provided for the lifting carriage. In the event of electromagnetic break motor failure or malfunction, this device should automatically engage to safely hold the carriage and prevent any freefall, thereby avoid accidents due to emergency brake failure.(v) Continuous rail cleaning brush for floor rail.(vi) Adjustable rail clamp to ensure alignment. 82 (vii) Resilient rubber pads on adjustable clamps for vibration dampening.(viii) Profile check on lifting carriage to check all three dimensions (width, depth & height) of the pallet. Note - 2 Electrical safety provision (i) There shall be Emergency stop push button at all panels and stations.(ii) Optical light beam amd mechanical safety sensor to stop the operation in case of improper storage.(iii) Back up circuitry for proper system operation.(iv) An electromagnetic brake shall be used to avoid the slippage of the hoist.(v) Stopper shall be provided for the maintenance door.(vi) Load cells shall be provided for the over weight of tray.(vii) Automatic door shall be provided for operator safety while machine in operating condition.Note - 3 Physical safety provision (i) The ASR system shall comprise of safety fences having grid size of max. 40 x 40mm & wire dia should be of min. 3 mm. Height of the fencing should be minimum 2.0 meter.(ii) One No. of electromagnetic aisle access door shall be provided. It should cover the complete length of the system on one side.(iii) A manual locking system to restrict the movement of unauthorised personnel shall be provided.NOTE: 1) Design report shall be submitted before execution of Work at site by the contractor toGE for his scrutiny / comments and futher submitted to AO for obtaining approval. Item No. 13.070 below shall be compatible with this item/ system and both should be integrated. Changes in make of different components of ASR system and minor changes in different parameters are permitted with approval of Accepting Officer as per recommendation of ASR system manufacturerprovidedthe end objective of the system is complied.2) The ASR system is to be installed in Bulk store house complex. Necessary civil works for installation of the ASRS required in the building is included in the scope of this item. Neccessary arrangements for integration of system with flooring and overhead trussess of the building shall be done at appropriate stage and shall be included in the rates quoted3) The PLC program backup for the ASRS and Advanced Inventory Management System shall be provided in an editable format. The WMS program shall be provided along with its source code to enable the user to perform maintenance, modifications and future upgrades as part of the project acceptanceMake of ASR system:Armstrong Ltd/ Godrej Koerber/ Kardex India storage solutions Pvt Ltd/ Daifuku India Pvt Ltd/ Addverb technologies Ltd/ Craftsman Automation Ltd/ Tech-mark 83 Supply, installation, testing and commissioning of Advanced Inventory Management System with compatibile computer hardware and integrated inventory and weight management system with PLC based software complete all as specified and directed by the Engineer-in-Charge. Technical specification of the system(i) System Height(Min) : 6400 (±100) mm(ii) System Width(Min) : 3150 (±100) mm(iii) System Depth(Min) : 2300 (±100) mm(iv) System Base(Min) : 7.24 Sq.Mtr(v) Tray Int. Size(Min): 300 (H) x 2450(W) x 500 (D) in mm(vi) Tray dead weight(Min) - 57 Kg (Approx.)(vii) Per tray weight capacity - 300 Kg(Min)Technical specification of the system:-(viii) Tray Quantity : 32 Nos.(ix) Usable net load - 9.6 ton(Min)(x) Storage surface area per system - 39.2 sq mtr(Min)(xi) Door - Automatic, (xii)Power supply - 440V, 50/60 Hz, 3 Phase(xiii) Motor 3 Phase 1440 RPM - Seimens make or equivalent(xiv) Chain - Diamond makeor equivalent, (xv)Bearing - SKF/NTN make or equivalent(xvi) External cladding - Epoxy powder coatedSafety Features:1. Photo curtain at access port, 2. Motor Protection relays, 3. Limit switch at door, 4. Single phase preventer,5. Switch mode power supply, 6. 15 Min battery backup for PLC, 7. Noise less than 60db, 8. Emergency stop various safety alertsNote: 1) The system and software provided under this item shall be of same make as for item 13.066 to 13.069 or a compatible system and software as recommended by the chosen manufacturer of ASR system. This system shall be integrated with ASR system.2) Comprehensive maintenance of the system during two years of defect liability period shall be a part of this item and rates shall be quoted accordingly. Comprehensive maintenance shall include all spares including software update. The ASR and advanced management system shall be operated by single warehouse management system.3) The PLC program backup for the ASRS and Advanced Inventory Management System shall be provided in an editable format. The WMS program shall be provided along with its source code to enable the user to perform maintenance, modifications and future upgrades as part of the project acceptance 84 Supply, installation and testing of Car Traffic Boom Barrier 6 mtr suitable to working on power supply 230 Volt, 50 Hz, 24V DC electric motor, adjustable with CAMS, operating ambient temperature from -20 to +55 Degree Celsius, uses cycle 2000/Day, air cooling, type of beam is rectangular with skirt, effective torque 280-290 Nm open/close time 2 to 4 Sec complete all as specified and as directed by Engineer-in- charge.Make: FAAC/Parkilo/Skidata/BFT 85 EXTERNAL WATER SUPPLYSupply and fix Foot valve conforming to IS, 100 mm dia complete all as specified and directed. 86 Supply and fix Cast iron air release valve with 100 mm bore and two outlets as per IS:14845 complete all as specified and directed. 87 Supply, installing, testing and commissioning of electrically driven horizontal Centrifugal Pump set 9.0 LPS at 50 Meter Head as per specification, motor TEFC type, 2880 rpm, 415 V, 50 Hz, 3 phase, class F insulation, IP 55 protection, starting on suitable Star Delta starter. The pump shall be horizontal, end suction, top discharge. The pump shall have cast iron casing, cast iron/bronze impeller (as per manufacturer), carbon steel shaft with common base frame (fabricated mild steel channel frame or cast iron type) placed on RCC (1:2:4) including foundation, bolts, nuts etc. complete with antivibrator pad as required capable of discharging not less than 550 LPM at 45 mtr head inclusive of suitable rated three phase starter as recommended by the manufacturer, PVC insulated copper cable connection from starter to the motor terminals all as specified and directed by the Engineer-in-charge.(01 No. Working + 01 No Stand By)Make:- Kirloskar Brothers/Crompton or equivalent. 88 Supply, install, test and commissioning of LT Panel, indoor type, powder coated, 2.0 mm thick CRCA Sheet, CPRI approved having, IP 43, MS angle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with Horizontal copper bus bar for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2.0 mm thick CRCA Sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. andcomprising as under: LT Panel for Pump House. The LT Panel comprising of the following:- 89 Incoming:-MCCB, thermal magnetic release, 4 pole, 415 Volts, 100 Amps, breaking capacity 36 KA- 01 No. Ics =100% IcuMetering Unit:- (a) R Y B Indications (LED Type)- 01 sets(b) Digital Multi function meter - 01 No.(c) CTs - 100/5A, CL-1, 15 VA - 01 set(d) Horizontal Aluminium busbar for 3 phase, 440 volts, 50Hz, 4 wire system of rating 350 Amps for phase and 350 amp for the neutral barOutgoing:-(a) MCB, TPN 40 Amp, 415 Volt, C Curve - 03 Nos.(b) Star Delta starter 12.5 HP, 3 Phase, 415 Volt- 02 Nos.(c) Digital ammeter - 2nos.(d) Single Phase Preventer - 2 nos. 90 M & L Valve chamber of internal size 0.90m X 0.90m X 0.90m (internal dimensions) including excavation of earth work in any type of soil, 150mm thick PCC in 1:4:8 type D2 foundation, brick work in CM 1:6, 15 mm thick rendering in CM 1:4 to internal surfaces and external surfaces upto 150mm depth below GL, PCC 1:3:6 type C1 as in coping, cover with two Nos. of hinges and one No. handle made out of MS round bar 10mm dia with necessary locking arrangement including painting to the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown on drg and as specified. Note:- The quoted rate shall include all earthwork and connected items. 91 M & L Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized iron strip of size 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No. 3 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessary test on completion all as specified and as directed. 92 EXTERNAL ELECTRIFICATIONM & L for HT/LT MS cable route indicator, engraved the description on the disc not less than 6 dia welded with 40x6xmm MS strip of approx length 90 cm duly painted on the steel parts as per colour code and provision of PCC 1:4:8 type D-2 using 40 mm grade stone aggregate of not less than 0.05 cum in each at base under the ground including necessary earth work and formwork complete all as specified and directed.Note: HT route indicator shall be painted as under:-(i) For HT 11 KV cables - “BROWN”(ii) For LT cables - “BLUE” 93 Supply and fix compact air insulated bus bar trunking system with copper busbar 1600 Amps, 50 KA breaking capacity, IP54 protection, bus duct 1600 A, 415 Volt, capacity sandwich type, Set RYBN complete with accessories such as flange ends, vertical bends, supporting brackets etc from transformer to LT panel board complete all as specified and directed. 94 Supply, install, testing and commissioning of Distribution transformer step-down Level 2 (Previously EE Level 3 before Amendment No 4 to IS 1180), 11KV / 0.433KV, Three Phase complying withIS: 1180/IEC-76(Part-1) 2014 with latest amendments, indoortype double copper wound suitable for 50 Hz system of capacity 800 KVA, oil immersed naturally cooled delta connected on HT side and Star connected on LT side, Vector Group Dyn11, provided with OFF load tap changer to vary secondary voltage from -7.5% to + 7.5 % in step of 2.5 %.Losses should be confined to the limits specified as follows: maximum allowable losses atfull load (100 %) & Half Load (50 %) shall not be exceeded 5838 watts & 2147 Wattsrespectively as per GRlHA RATING, Percentage Impedance: 4.5%. Losses and Impedance are subjected to tolerance as specified in IS 1180. The transformers should be supplied with first filling of oil confirming to IS 335. The transformer should have both side cable end box with neutral brought out complete all as directed by Engineer - in -Charge, and installation of transformer shall be carried out as per IS-10028and comprising with the following standard fittings/Technical specifications:-(a) Lifting lug for transformer and tank.(b) Earthing terminal rating and diagram plate.(c) Air release device.(d) Oil filling inlet pipe with plug.(e) Drain outlet pipe with brass gate valve.(f) Conservator tank with oil level indicator(g) Silica jel breather(j) First fill of oil upto level including conservator tank with fresh new oil conforming to IS335.(k) Type of connection Delta/Star(l) Type of cooling: Oil and Natural Air.(m) Vector group: DYN 11.(n) Temperature rise over an ambient of 50 °C maximum.(o) Cable end box on both side for HT/LT cables of suitable size.(p) Provision of thermometer with pocket.(q) Provision of oil and winding temperature gauge. 95 Supply, install, test and commissioning of LT Panel, Indoor type, powder coated, 2.00 mm thick CRCA Sheet, CPRI approved having, IP 43, MSangle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply,bus bar chamber with Horizontal copper bus bar for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air.The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 1.6 mm thick CRCA Sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. andcomprising as under: The LT Panel comprising of the following:- Main LT PanelHorizontal copper busbar for 3 phase, 440 volts, 50 Hz, 4 wire system of rating 1600 Amps for phases and 1600 Amps for Neutral. 96 Incoming:-Incomer:-ACB 4 Pole, 415 V, 50 KA with Thermal Magnetic Release (Manual Draw out type) of capacity 1250 AmpMetering Unit:- (a) R Y B Indications (LED Type)- 1 sets(b) Digital Multi function meter - 01 No.(c) CTs - 1600/5A, CL-1,15 VA - 1 setOutgoing:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 630 Amps, Ics =100% Icu, breaking capacity 35 KA, Ics =100% Icu- 02 No. (For DG AMF Panel & Spare)(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 400 Amps, Ics =100% Icu breaking capacity 36 KA- 02 No. (for APFC Panel & FPB 2 Near bulk Store) (c) MCCB, thermal magnetic release, 4 pole, 415 Volts, 320/315 Amps, Ics =100% Icu breaking capacity 36 KA- 01 No. (for FPB 1 Near Adm Block) (d) MCCB, thermal magnetic release, 4 pole, 415 Volts, 200 Amps, Ics =100% Icu breaking capacity 36 KA- 01 No. (for Existing Load)(e) MCCB, thermal magnetic release, 4 pole, 415 Volts,125 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for FPB 3 Near Auction Disposal Store)(f) MCCB, thermal magnetic release, 4 pole, 415 Volts, 32 Amps, Ics =100% Icu breaking capacity 25 KA- 03 No. (for MT Complex, Watch tower no 2, Guard room)(g) Digital Ammeter with suitable CT for each outgoing 97 Supply, install, test and commissioning of LT Panel, outdoor type, powder coated, 3.00 mm thick CRCA sheet, CPRI approved having, IP 54, MS angle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply,bus bar chamber with Horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables. Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, crack resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. Feeder Panel No.1 (Near Admn bldg) 98 Horizontal Aluminium busbar for 3 phase, 440 volts, 50Hz, 4 wire system of rating 600 Amps for phases and 600 Amps for Neutral.Incoming:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 400 Amps, breaking capacity 36 KA - 01 No. Ics =100% IcuMetering Unit:- (a) R Y B Indications (LED Type) - 1 sets(b) Digital Multi function meter - 01 No.(c) CTs - 600/5A, CL-1,15 VA - 1 setOutgoing:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 200 Amps, Ics =100% Icu breaking capacity 36 KA- 02 No. (for 2nd floor & spare)(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 160 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for 1st floor)(c) MCCB, thermal magnetic release, 4 pole, 415 Volts, 63 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for G floor)( d) Digital Ammeter with suitable CT for each outgoing 99 Supply, install, test and commissioning of LT Panel, outdoor type, powder coated, 3.00 mm thick CRCA sheet, CPRI approved having, IP 54, MSangle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply,bus bar chamber with Horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air.The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2 mm thick CRCA sheet duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, crack resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. Feeder Panel No.2 (Near Bulk Store) Horizontal Aluminium busbar for 3 phase,440 volts, 50Hz, 4 wire system of rating 600 Amps for phases and 600 Amps for Neutral. 100 Incoming:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 400 Amps, breaking capacity 36 KA - 01 No. Ics =100% IcuMetering Unit:- (a) R Y B Indications (LED Type)- 1 sets(b) Digital Multi function meter - 01 No.(c) CTs - 600/5A, CL-1,15 VA - 1 setOutgoing:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 200 Amps, Ics =100% Icu breaking capacity 36 KA- 02 No. (for Equipment Load & spare)(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 125 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for Bulk Store)(c) MCCB, thermal magnetic release, 4 pole, 415 Volts, 32 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for Watch Tower No. 1)( d) Digital Ammeter with suitable CT for each outgoing 101 Supply, install, test and commissioning of LT Panel, outdoor type, powder coated, 3.00 mm thick CRCA sheet, CPRI approved having, IP 54, MSangle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply,bus bar chamber with Horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natural flow of air. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 2 mm thick CRCA sheet, duly compartmentalised for each control gear with louvers and air vent gasket for natural flow of air and suitable provision to accommodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, crack resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. Feeder Panel No.3 (Near Auction Disposal Store) 102 Horizontal Aluminium busbar for 3 phase, 440 volts, 50Hz, 4 wire system of rating 200 Amps for phases and 200 Amps for Neutral.Incoming:-(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 125 Amps, breaking capacity 25 KA- 01 No. Ics =100% IcuMetering Unit:- (a) R Y B Indications (LED Type) - 1 sets(b) Digital Multi function meter - 01 No.(c) CTs - 200/5A, CL-1,15 VA - 01 setOutgoing:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 100 Amps, Ics =100% Icu breaking capacity 25 KA- 02 No. (for Store Dispatch Complex & Spare)(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 32 Amps, Ics =100% Icu breaking capacity 25 KA- 03 No. (for Pol store, Auction disposal store, Covered Hard Standing)(c) Digital Ammeter with suitable CT for each outgoing 103 Supply and fixing poly carbonate street light junction boxes IP 66/67 Weather proof suitable for outdoor installation having minimumsize255 x 355 x 122 including suitableCable connecting Terminals, Cable lugs, including provn of one No. MCB SP 6 Amps for operating the street light fittings, Suitable Cable Glands as per site requirement, all as directed by the Engineer-in-Charge. 104 S & F Street light bracket made out of GI tubing 32/40 mm dia, light grade of length1.2 mtr long bend to shape suitable for security light fitting with necessary MS clamp-02 Nos with one coat of anti corrosive primer and two coats of aluminium paint including nut, bolt, washers and 3 core FRLSinsulated sheathed, multistranded copper conductor of size 1.5 sqmm for phase and neutral and 1.5 sq mm for earthing drawn throughthe poles for connection from junction box to light fitting complete etc all as specified.Note: Phase should be Red/Yellow/Blue, neutral should be black and earthing wire should be green in colour. Two runs of cable for phase and neutral and one run of cable for earth will be measured and paid as one unit length. 105 Supply and fixing of LED flood light, 200W, watt 230 V, AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and made up of pressure die cast aluminium housing with toughened glass and high power LEDs and secondary lenses with IP protection incl system efficiency >110/120LPW 10KV SPD included Energy saving, environmental friendly and general purpose lighting complete all as specified and directed Engineer-in-Charge. Make : Make : Crompton/Philips/Wipro/Bajaj 106 Supply and fix High Mast Panel outdoor type, suitable to take load up to 6 KW, Conforms to IS/IEC 60947-4-1, Provided with Protection Degree IP 54, Extended wide band (150 Vac - 300 Vac) coil, FRLS (Fire retardant low smoke) Internal wiring, In-built Short-Circuit Protection, Class H Insulation, 3 Phase 415 Volts AC with the following accessories:Phase : 3 Phase, 415 VoltsMax Load Capacity : 6 KWTimer type: AstronomicalContactor Rating : 32 A TPMCB Rating : 63 A TPNMake : Crompton/ Philips/Wipro 107 Supply and laying DWC (Double wall Corrugated) duct pipe outer dia 63 mm and inner dia 50 mmconforming IS 16205 (Part 24 ) for protection ofelectric cable complete all as specified and directed. ( for 10 sqmm St light cable & 16 Sqmm cable) 108 AVIATION OBSTRUCTION LIGHTSupply and fix aviation obstruction light integral aviation light comprising of aluminium housing with polycarbonate enclosure, 240 volt with timer switch and one No.10 A, MCB, SPN 230 V with fixed enclosure complete all as specified and directed by Engineer-in-charge.Make:- Bajaj cat No BGAV 302 LED or equivalent in Philips/Crompton/Surya 109 INCINERATORSupply, fixing and testing and commissioning of Solid waste Electric Incinerator, single chamber type having a combustion chamber supported with electric coil for generating sufficient heat to burn 100Kg/hr solid waste, retains and re-burns the exhaust gases for minimum of 2 seconds at 850°C, Stainless steel stack for longevity, fitted with a Velocity Cowl as standard, Chamber designed for maximum air flow and circulation which in turn improves efficiency and total burn time, easy to open and close loading door, designed to increase operator safety, steel cladding to reduce risk of infection and increase longevity of system with working temperature not less 450 degree Celsius mounted on foundation as recommended by OEM including electrical control panel with suitable size MCCB, relays & contactor recommended by OEM complete all as complete all as specified and directed.Note:(a) The electrical works including electrical LT panel, internal wiring of the LT panel, suitable size copper wires from panel to Solid waste Electric Incinerator as recommended by OEM to operate the Solid waste Electric Incinerator of capacity 100 Kg/Hr to make Solid waste Electric Incinerator operational is deemed to be included in the rate quoted. (b) All Electrical works shall be carried out as per relevant BIS/lS equivalent standard norms only and also in accordance with the latest edition of the Indian Electricity Act / rules formed there under and as amended from time to time.(c) Any other works (mechanical, electrical & Civil) connected to installation, testing & functional requirement of Solid waste Electric Incinerator of capacity 100 Kg/Hr all as mentioned above and which is not mentioned or included in this Schedule but required at site necessary shall be carried out by the contractor and quoted rate shall deemed to included for the same.(d) Foundation/Plinth/Base: shall be provided as per manufactures recommendations, however minimum 0.5m space should be available all around the Solid waste Electric Incinerator and height of plinth shall not be less than 0.5 MMake: Precitech thermal Pvt. Ltd., Rram Buisiness corp, Alfa therm Ltd., Thermax Ltd, Kanti Industries, Fortec 110 Supply & fixing MCCB, thermal magnetic release, 4 pole, 415 Volts, 200 Amps, breaking capacity 36 KA- 01 No.Ics =100% Icu with Sheet metal enclosures fixed properly at directed location and connecting/testing complete all as directed. 111 ELECTRIC SIRENSupply and fixing Sirens Electronic type Horizontal Double Mounting Three Phase 400/440V, 2800 RPM 50 C/s Flame Proof, audible range 3.5 Km, 2 HP, continuous normal operation for at least 50 minutes with on/off system complete all as specified and directed. 112 Supply and fix advance Sirens controller Electronic type suitable to operate on 3 phase, 415 volt AC 50 Hzcomplete all as specified and directed. 113 Supply & fixing MCCB, thermal magnetic release, 4 pole, 415 Volts, 63 Amps, breaking capacity 25 KA- 01 No.Ics =100% Icu with Sheet metal enclosures fixed properly at directed location and connecting/testing complete all as directed. 114 SOLAR POWER PLANTDesign, supply, installation testing and commissioning of roof top solar photovoltaic power plant (ON-GRID) on roof top of existing bldg of capacity 150 KWp, power evacuation at 415 Volt 3 phase system all as per guidelines/norms issued by MNRE & Indian Metrological Deptt approved Solar Radiation Data viz Direct Normal Irradiance, Global Horizontal radiance etc complete comprising with the following Solar Photo Voltaic Plant.(a) Design, supply, installation, testing and commissioning of Solar PV Modules capable of generating 150 KWp (AC) electricity at 415 Volt 3 phase system. These Solar PV Modules of 540 watt PERC with a modular efficiency of 17-19.84% as per IEC and MNRE standard or as per approved design parameters with Poly/Multi Crystalline Silicon Solar cells of minimum wattage of 540 watt with minimum 144 cells & efficiency not less than 17 -19.84%, conforming to IEC 61215, IEC 61730, IEC 61701. Solar PV Module should be of approved Indian Brand only and Qualify under the Domestic Content requirement (DCR) norms of NVVN/SECI and testing requirement fixed by MNRE. The PV modules shall be warranted for a period of minimum 25 years, Solar PV modules used in system shall be warranted for their output peak watt capacity, which should not be less than 90% at the end of Ten years and 80% at the end of Twenty Five years. Each Solar PV Module must use RF identification tag. The following information must be mentioned in the RFID used in each module:Name of manufacture of PV module, Name of manufacturer of Solar cell, Month & year of manufacturer (for solar cell and module), Country of origin (lt is mandatory to use cells and modules manufactured in India). I-V curve of the module, Wattage, LM, V-M, & FF for the module, Unique Serial No & Model No of the module, Date & year of IEC PV qualification certificate, Name of the test lab issued IEC certificate. The PV modules used in the solar power projects must qualify to the latest edition of the following International Electro technical Commission (IEC) P module qualification test or equivalent BIS Standards. The PV module must be tested and approved by one of the IEC authorized test centres. 115 (b) Material and labour for Module Mounting structure (MMS) fabricated from hot dip galvansied iron section of suitable size with specified tilt angle according to site requirement & optimum angle to achieve maximum benefit of solar energy and suitable to withstand 180 Kmph wind speed all as per approved design parameters as per MNRE standards and to match with the existing site conditions. Necessary roof treatment to avoid any seepage in future shall be done by the Contractor and the amount included in the rate quoted. The roof tiles shall be dismantled and refixed back in original position. Structure shall be built with brick masonry basement of adequate size as per direction at site including all necessary civil work required for the foundation.(c) Supply, laying & Testing of DC cable minimum size 4/6sq mm multi stranded copper conductor, conforming to relevant IS, weather proof UV resistant with operating temperature up to 120 degrees, minimum rated voltage 1100 volt for inter connection of SPV Modules to array junction box including suitable size of cable lugs, male & female MC4 connectors & joints etc.(d) Supply, installation test and commissioning of protection devices MCCB 400 A, isolator and three phase 4 wire LT energy meter, array junction boxes having rating 150 KWp with over voltage protection and surge protection.(e) Supply, installation, test and commissioning of Grid tie Solar Power conditioning unit / inverter of minimum capacity 150 KWp(DC to AC 415 V in Three phase system) all as per approved design parameters & capable of generating output voltage 415 V AC at rated load condition with efficiency not less than 98 %, conforming to IEC 600682-2 NDE standards with power reduction, LVRT with protections for anti-islanding, Ground fault monitoring, Grid Monitoring, AC & DC Over voltage and under voltage protection, AC & DC short circuit lover current protection and DC reverse polarity protection, graphic display etc. all as specified and as directed.(f) Material and labour for Earthing for Lightning protection for SPV modules etc as per IE rule, MNRE guide line & BIS all as per approved plan complete with galvanised earth plate electrode 600x600x6 mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to and including Gl strip 32x6mm size protected with Gl medium grade pipe 40mm dia for earth electrode up to test point by means of GI nuts, bolts, check nuts and washers including earth work excavation, PCC (1:3:6) type Cl pit and RCC cover ( 1:2:4) type Bl and funnel, with necessary charcoal, salt etc complete. 116 (g) Supply and fixing aluminium strip of size 25 x 3mm thick for roof / down conductor fixed on insulators/ saddles of suitable size for SPV modules lightning protection upto interconnection between Roof top LA to Ground Earthing system. (h) AC Cable: Supply and laying of 150 Sqmm LT XLPE insulated, screened PVC bedded, sheathed with multi-stranded aluminium conductor armoured with galvanised steel wire 1100 volts grade heavy duty conforming to IS 150 Sqmm x 3.5Core as per site requirement.Note (i) :-(a) Before quoting the bid, Contractor or his authorised Engineer/consultant must visit the proposed site to study the site condition.(b) Before commencement of work, contractor shall submit drawings & lay out plan with scale including required qty to Accepting Officer for approval.Note(ii):-(a) The mechanical structures, electrical works and overall workmanship of the Grid solar power plant must be warrented for a minimum of 5 years.(b) All Mechanical, Electrical works shall be carried out as per relevant BIS/lS equivalent standard norms only and also in accordance with the latest edition of the Indian Electricity Act / rules formed thereunder and as amended from time to time.(c) Any other works (mechanical, electrical & Civil) connected to installation, testing & functional requirement of solar photovoltaic power plant of capacity 150 KWp (AC) all as mentioned above and which is not mentioned or included in this Schedule A but required at site necessary shall be carried out by the contractor and quoted rate shall deemed to included for the same(d) Contractor shall provide adequate Spares/items required for minimum period of 1 year maintenance including DC & AC items under scope of work.Note (iii) : Design report shall be submitted before execution of Work at site by the contractor toGE for his scrutiny / comments and futher submitted to AO for obtaining approval. 117 DG SETSupplying, installing, testing and commissioning, factory assembled silentDiesel Engine driven generator set, fully wired alternator AC to give an out put of 400 KVA continuously rating at a power factor 0.8 lagging, 3 phase 4 wire, 415 volts 50 Hzsupply, 1500 RPM, directly coupled with diesel engine liquid cooled mounted on common base frame complete with floor mounting fuel tank (service tank) of adequate capacity with fuel line & accessories, PCC foundation work as per manufacturers instructions, vibration damper pads, control panel & other accessories etc and comprising of following.(a) Diesel Engine: Liquid cooled turbo charged with after cooler to deliver suitable BHP at 1500 RPM under NTP conditions of BS 5514 and conforming to IS 10001/ 10002, DIN 6271 & ISO 3046 with an overload capacity of 10% for one hour in any 12 hours continuous operation with the following accessories: Diesel engine of rated speed at full load electric start developing with system with radiator and including electronic governor control of class A1, engine control panel, lub oil pump, water pump, fuel tank, exhaust pipe with silencer and suitable for electric start with batteries ofadequate capacity and suitable for alternator of specified capacity complete with fly wheel direct/flexible coupling and coupling guard complete.(b) Radiator with blower fan or heat exchanger with guard.(c) Pipe coupling for engine cooling system piping.(d ) Corrosion inhibitor coolant(e) Paper element filters(i) Fuel filter(ii) Lube oil filter(iii) By pass(f) Fly wheel housing and fly wheel to suit alternator.(g) Engine bearing mechanism in fly wheel housing.(h) Shut off coil with safeties for LLOP/HWT/over speed.(i) Dry type air cleaners and vacuum indicators.(j) Residential silencers.(k) Stainless steel exhaust flexible bellows. 118 (l) Battery charging alternator.(m) Exhaust piping made out of STIC C class, MS pipe inclusive of all accessories and hardware, necessary supports scaffolding as per manufacturers recommendations to sustain back pressure with rain cap.(n) Mineral wool insulation 2 inch thick suitable for 400 degree Celsius temperature cladded with aluminium sheet of30 gauge for the entire length of exhaust pipe.(o) First fill of oil, coolant and diesel during commissioning and 12 hours testing.(p) Interconnecting copper cabling of adequate capacity batteries control.(q ) Fuel pipe class STIC 1 /1.5 /2 dia - 01 lot(r) Self starter 24 volts DC.(s) Electric operated electronic governor.(t) Fuel injection pump.(u) Electronic instrument panel, complete with all accessories as per manufacturers specifications displaying the following:-(i) 12vx2 nos -24V Battery. (ii) Water temperature.(iii) lubricating oil pressure.(iv) Engine speed -1500Rpm(v) Engine hours(vi) Frequency.(vii) Voltage.(v) Safety control (Trip and indication).(i) High water temperature(ii) Low lube oil temperature(iii) Overspeed stop 119 (w) Base frame: Sturdy, fabricated welded construction, channel iron base frame (duly painted) for mounting engine and alternator as per manufacturers design alonwith AVM pads.(x) Battery:-24 volts(2x12v Battery) DC, 180AH, maintenance free battery conforming to IS:14257 with leads & terminals (Make- Excide/Amron).(y) Fuel tank:12 hrs. full load diesel storage capacity fuel tank with mounting brackets factory made of 5mm thick HR/MS sheet with level indicator fuel inlet, fuel outlet, air vent, drain plug, inlet arrangement for diesel filling for exterior canopy (without opening its panel) etc complete all as specified and directed.(z) Isolator panel with 630 amp MCCB(aa) Auto logic panel for automatic stat(ab) Alternator: Alternator suitable rated for 400 KVA, 0.8 pf , 415 volts, 3 phase, 4 wire, 50 Hz at 1500 RPM, self excited and self regulated with AVR brushless, screen protected, drip proof, insulation class-H, IP -23, voltage regulationgrade - VG 3 self ventilated and conforming to BS: 5000 / IS: 4722 suitable for engine as mentioned here-in before, conformig to IS: 13364(part-1)Make: KOEL GREEN / stampford/crompten/kirloskar/Greaves(ac) Acoustic Enclosure:- M & L for acoustic enclosure for the above 400 KVA DG set to reduce noise level to 75 dB measured at 1.0 meter distance for audible frequencies as per guide of Central Pollution Control Board andmanufacturers specification and comprising of following from authorised GOEMs of Gen Set manufacturers specified :-(i) Sound insulation : 100mm thick Rock wool (Density 64 Kg/Cum).(ii) Outer body : 1.6mm thick CRCA(iii) Door : 1.6mm thick CRCA(iv) Base frame : ISMC 300(v) Inside illumination : 1 No.- 1 x 18 watt LED fitting of make Phillips/ Bajaj/ Crompton.(ad) AMF Control panel:- Factory fabricated cubicle type, free standing, floor mounted, indoor type, IP-43, AMF control panel, provided with removable rear panels & hinged front panel for easy accessibility, fabricated out of not less than 2.0mm thick CRCA sheet including two coats of powder coated paint over a coat of red oxide primer etc and comprising of following: 120 (ae) AMF control circuit with 4 pole MCCB 630 Amps - 2 nos, with ultimate breaking capacity Icu-50 KA at 415 volts and microprocessor release conforming to IEC 60947 Part-I with breaking capacity Ics=Icu at 415 volts , thermal overload setting 70% to 100%, short circuit setting 5 to 10 times-02 Nos. for main supply & DG set supply with HRC back up fuse complete with all DC control relays/ Line voltage monitor (LVM) as per OEM specifications incorporating motorised stored energy operating Engine start, stop, three attempt starting facility and failure to start etc.(af) Digital load manager : Three phase 4 wire indicating V,I,PF, KVA, KW, F of Enercon make with serial communication port model No. EM6400 with class 1.0 accuracy meter or equivalent make suitable rating of CT per phase- one No.(i) Indication lamp R, Y, B with 3 Nos. of 2A HRC fuses-10 sets.(ii) Bottom gland plate for incoming and outgoing cables.(iii) Circuit diagram plate.Note:- DG set should be as per CPCB- 4 latest norm wef 01 July 2023 of National Clean Air programme (NACP) Act 1981.The contractor shall procure the item within the period given by CPBC in case of revision in CBPC norms. Nothing extra will be paid on account of delay from the part of contractor. DG set shall have an exhaust with stack height of minimum 2m from the top of generator with a cowl. Smoke released from the exhaust of the DG sets indicating that emission parameters are within permissible limits, as prescribed by CPCB, demonstrating compliance with emission limits prescribed by CPCB 2016. 121 Supply, install, test and commissioning of LT Panel, Indoor type, powder coated, 2.00 mm thick CRCA Sheet, CPRI approved having, IP 43, MS angle iron section of 50X50X6 mm frame, suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with Horizontal aluminium bus bar 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators, factory fabricated, roof canopy, with front and back openable double door system lockable/openable by keys from both sides, louvers & air vent gasket for natuaral flow of air. The bottom of the outer shell contains a detachable plate having provision for entry of armoured cable of adequate size with glands. The inner shell be made out of 1.6 mm thick CRCA Sheat duly compartmentalised for each control gear with louvers and air vent gasket for natuaral flow of air and suiatable provision to accomodate incomer/outgoing MCCBs/MCBs and metering devices and suitable busbar chamber for passing and connecting UG cables.Providing bus bar for phases and neutral and shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on suitable size F class insulators made on non hygroscopic, non combustile, track resistant, high strength FRP/SMC/DMC material at an interval of not more than 300 mm through out the length of the TPN bus bar all as specified and directed by the Engr-in-Charge. Feeder Panel No.1 (DG Panel ) 122 Incoming:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 630 Amps, breaking capacity 36 KA - 01 No. Ics =100% IcuMetering Unit:- (a) R Y B Indications (LED Type) - 1 sets(b) Digital Multi function meter - 01 No.(c) CTs - 800/5A, CL-1,15 VA - 1 set(d) Horizontal aluminium bus bar for 3 phase 440 V, 50 Hz, 4 wire system of rating 800 Amps for phases and 800 Amps for neutralOutgoing:-(a) MCCB, thermal magnetic release, 4 pole, 415 Volts, 400 Amps, Ics =100% Icu breaking capacity 36 KA- 03 No. (for Package AC Bulk Store, pump house and fire pump & spare)(b) MCCB, thermal magnetic release, 4 pole, 415 Volts, 160 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for Pump House & Fire Pump)(c) MCCB, thermal magnetic release, 4 pole, 415 Volts, 80 Amps, Ics =100% Icu breaking capacity 25 KA- 01 No. (for Incianator)(d) MCCB, thermal magnetic release, 4 pole, 415 Volts, 32 Amps, Ics =100% Icu breaking capacity 25 KA- 07 No. (for Terrace pump 1, Terrace pump 2, Power House, High mast 1, High mast 2, Street Light)(e) Digital Ammeter with suitable CT for each outgoing(f) Astro Time switch for 3 phase 20A- 1 No(g) 3 Phase Power contactor 20 amps, with 230 coil 123 SEWAGE DISPOSALM & L for laying of DWCPE sewage pipes line 200 mmdia borepipe sftiffnessclass SN 8 includingsealing of joints fittings etc complete with collers complte all as spcified and directed 124 M & L for laying of DWCPE sewage pipes line 150 mmdia borepipe sftiffnessclass SN 8 includingsealing of joints fittings etc complete with collers complte all as spcified and directed 125 COMPOUND WALLS & F Concertina Coil of 600/700 mm outer dia made out of 2.60 mm dia spring steel wire dipped in corrosion preventive fluid (rusilo 901) of castrol make each coil having min 50 turns (circles) covering 6 m and an average weight not less than 8.57 Kg (plus or minus 5 %) incl handle and spike at both ends of coil erected in position on top of mild steel angle by fixing with 1.70 mm GI wire for securing, coil with fish hook bars, incl necessary welding to MS Sections etc all as specified and directed. 126 GREEN BUILDING NORMS(GRIHA CONCEPT)Supply and Install Organic Waste Converter fully automatic having capacity 50Kg/day, having internal tank made of high quality stainless steel while external panels are powder coated for enhanced product life with necessary electric control panel, cabling necessary civil works for installing machine etc with following requirements:-Type of machine: Fulley automatic in-vessel composterComposting method: 24 Hrs. Micro-organisms-based compostingmachine Type of microganism used: Heat resistant thermophilic bacteria Final Output: Dry organic Soil conditioner/Soil supplementsCycle time: 24Hrs Volume reduction in 24Hrs: 80-85% Internal tank: Stainless steel type Main agitator Shaft: Stainless steel type Input voltage: 415VSpecial features: VFD as standard across all models, Touchscreen standards Daily waste processing: 150Kgs Rated capacity: 7KWPower consumption (KWH par cycle): 13-15Length: 1650, Width: 850,Height: 1455 127 Supply, installation, testing and commissioning Three phase energy meter with the following specifications: Microprocessor based three phase, smart electricity meter, equipped with a bi-directional cellular (NB-IoT) communication that allows it to interact with the head end system (HES) for data collection and configuration with adequate security including electronic static pre paid cum postpaid energy meter rating 415 Volts, 50 Hz of range 10-100 Amps, complying to IS16444:2015 (reaffrimed 2020) and conforming to IS 3779 with LED display and parameters like Voltage, Current, Frequency, Power, Power factor, KWH/KVA, default in built dual source, inbuilt long range (LORAWAN) Communication suitable for outdoor LoRa data accumulator and also compatible for Prepaid and Postpaid online energy monitoring billing system with disconnection /reconnection through remote software / data export to ERP complete with 5 Years warranty.Note:(a) The Energy Meter to be capable of running in both prepaid and postpaid mode.(b) The meters to carry 5 year warranty. (for entire system) 128 Supplying, Fixing, Commissioning and testing of configuration of cloud Hosted multi user web based software with following modules:(i) Head End System (HES): to acquire meter data automatically from DCU sand monitor parameters acquired from meters.(ii) Meter Data Management ModuleThe meter data management module would be responsible for collecting the data from the data concentrator and make the data available to the billing system. The system would support offline meter(a) 30 min instantaneous data from all the meters for seven parameters Cumulative Energy. Cumulative Apparent Energy (as applicable), Power, Current, Voltage, Power Factor and Frequency(b) Monthly billing survey data for cumulative energy and max demand(iii) Billing Module: The billing module would collect the data from the meter data management module, calculate the energy consumption, calculate billing determinant and make energy data/billing data available to admin and end users. The billing module would include functionalities for tariff setup, bill format setup, bill adjustment, occupation billing and vacation billing. It would allow postpaid and prepaid functionality as required.(iv) Occupation and Vacation Module: The system would support occupation/vacation based on the unit catagories. The system would support automatic data capture on occupation and vacation events.(v) Website: There would be a dedicated website forAGE/GE and BSO team to view all the data and information alongwith customer portal for use of customer. The designated users in MES would have the admin access to the application. The MES Staff would also have the access to the key information on mobile App (AndroiandiOS based) for admin use complete all as specified and directed.(vi) Customer Module: The system would include a customer portal for the resident/occupants to login and view their own energy /billing data and recharge facility. There shall be consumer App (Android and iOS based) also to log in and view their own energy/billing data and recharge facility.(vii) Communication Module :The system would provide communication of energy data and bills via print, email and sms methods. 129 (viii) Meter Master Data: The system would support meter data repository. The system would support meter replacement process.(ix) Excel Export: the system would support export of metering and billing data in excel and pdf format.(x) Energy Accounting module: The system would include features of energy accounting, the system would to able to account for total energy block wise, facility wise and would also allow calculations of the unaccounted energy in case total energy meter is also available.(xi) Prepayment/Recharging Facility:The system should periodically monitor the energy consumption of prepaid consumers and decrease the available credit based on the consumption. The system should allow online/digital recharging through consumer App (Androidand iOSbased) and Web portal. The configuration and necessary arrangement for payment gateway and E-MRO facility shall be deemed to be included in the quoted rate. The system should sendconnect/disconnect command on the basis of available credit.Low credit alarm: The system will give an alarm over the consumer App and SMS to the registered mobile number in case the credit in the meter goes down be low apredefined limit.Emergency credit: The meter will work even when the credit falls down to zero to prevent disconnection. This limit shall be configurable. The system should support happy hours inorder to prevent disconnection in non working hours and on holidays. The Happy hours should be configurable complete all as specified and directed. 130 Supply, Installation, Testing and Commissioning of DCUs/Gateways and the arrangement of Sim cards or Internet to enable reliable medium for two-way communication between Smart Meter & HES. The data acquisition (Push/Pull) frequency shall be, configurable. It shall push events such as tamper, power off etc. to HES immediately on occurrence/receipt from meters. It shall have provision for the cellular, WiFi and Ethernet communication for the backhaul to HES. It shall be capable to handle data of minimum 1000 Nos. of any type of smart meter (1ph/3ph).It shall be able to communicate with the nearest meters at a distance of at least 500 m, depending on topographical features. Communication of the nearest meters with other meters shall be established through appropriate mesh formation. RF Mesh shall support self-forming and self-healing features. The equipment shall be weather proof and dust proof (minimum rating: IP54 for indoor and IP65 for outdoor installation). It shall have rechargeable battery with backup for 1(one) hour for normal meter reading, to push tamper event, carry out on demand reading, etc complete all as specified and directed. 131 Hosting GPRS (4G) charges for Gateway for five years from the date of completion F Including 2 years waranty and 2 years Maintinance after warranty) Make:-Airtel/Jio/Vodafone 132 Supply and installation of digital Water flow meter 50mm suitable for domestic and commercial applications complete all as specified and directed. 133 Supply and installation of digital Water flow meter 40mm suitable for domestic and commercial applications complete all as specified and directed. 134 ARBORICULTUREM & L for excavation of pits size 30cm x 30cm x 30cm in loose soil and filling the pit with mixture of river sand and approved top soil in the proportion of 1:3 mixed with 30% of cow dung powder, 100gms of bone meal and 100gm of neem cake powder 135 All as per item No 13.121 above but pit size 60cm x 60cm x 60cm 136 Supplying and planting red palm or royal palm healthy sapling having 45cm height and shall have a minimum height of 65cm after 6 months 137 Supplying and planting coconut tree healthy sapling having 75cm height and shall have a minimum 95cm after 6 months. 138 Supplying and planting flower plants(Champa/ hybrid hibiscus/ Hybrid west Indian Jasmine/ Hybrid Plumeria white plant/ Panama yellow plant/ Oleander) healthy sapling having 10cm minimum height and shall have a minimum 25cm to 30cm height after 6 months. 139 Supplying and planting phylanthus healthy sapling having 15cm to 30cm height and shall have a minimum 45cm height after 6 months. 140 Supplying and planting bougainvillea colour flower plants healthy sapling having 15cm to 30cm height and shall have a minimum 45cm height after 6 months. 141 Supplying and planting song of India flower plants healthy sapling having 15cm to 30cm height and shall have a minimum 45cm height after 6 months. 142 Supplying and planting dracaena flower plants healthy sapling having 15cm to 30 cm height and shall have a minimum 60cm height after 6 months. 143 Supply and planting mexican grass including providing manure as directed. 144 PILE FOUNDATIONBoring 450 mm dia piles to any depthin any type of soil/ strata by anyapproved method, complete all as shown on drawings and as specified anddirected.Note:- The quoted rate shall include for mobilization and demobilisation of piling equipment, making approaches to site or point of pile boring if necessary. Nothing extra shall be paid on this account. 145 Boring for bored cast in situ pile 600 mm dia to any depth through any type of soil / strata, using DMC method (Direct Mud Circulation)and getting out & disposal of spoil to any distance outside of MD land , complete all as specified and as directedby the EngineerIn Charge 146 M & L Reinforced cement concrete of grade M-35 design mix (RMC) as per IS-456using 20 mm graded stone aggregate in cast in situ DMC bored pile of any length / any sectionscomplete all as specified and as shown on drg 147 M & L Reinforced cement concrete of grade M-35 design mix (RMC) as per IS-456using 20 mm graded stone aggregate in pile caps / grade beams complete all as specified and as shown on drg 148 Providing TMT bars (CRS/HCRM/CRM) in reinforcement 10 mm dia and over for bored cast in situ piles of any length and any dia all as shown on drgs including cut to length, bend to required shape, cranking/hooking ends if necessary and binding with and including 0.9mm dia MS wire (annealed) or welding so as to secure the bar firmly in position/ required shape complete all as specified and shown on drgs (Fe-500D). 149 Providing TMT bars (CRS/HCRM/CRM) in reinforcement 10 mm dia and over for pile caps and grade beams, cut to length, bent to shape required, hooking ends and binding with and including 0.9mm dia MS wire (annealed) or welding so as to secure the bar firmly in position/ required shape complete all as specified and shown on drgs (Fe-500D). 150 All as per item No 13.136 here-in-before but5mm dia and over upto and including 10mm dia as in helicals for piles and stirrups for grade beams complete all as specified and directed. 151 M & L for providing PCC (1:4:8) type D-2 using 40 mm graded stone aggregate for concrete layer below pile caps foundation complete all as specified and directed. 152 Formwork to sides of pile caps/ grade beams and similar work, rough finished surface of concrete flat all as specified and as directed. 153 M & L for carrying out non destructive integrity test all as per IS 2911 (Part 4) 2013 for 600 mm dia cast in situ piles including mobilising and removing the testing equipments from site after testing is completed all as specified and directed. 154 M & L for carrying out non destructive integrity test all as per IS 2911 (Part 4) 2013 for 450 mm dia cast in situ piles including mobilising and removing the testing equipments from site after testing is completed all as specified and directed. 155 M & L for carrying out Initial Load test (vertical load test) cast in situ piles of 600 mm dia as per IS 2911 (Part 4) 2013 including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(Note :- Providing and installing test piles shall measured and paid separately) 156 M & L for carrying out Initial (lateral load test) cast in situ piles of 600 mm dia as per IS 2911 (Part 4) 2013including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(Note :- Providing and installing test piles shall measured and paid separately) 157 M & L for carrying out Initial load test (pull outtest as per design load) of cast in situ piles of 600 mm dia as per IS 2911 (Part 4) 2013including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(Note :- Providing and installing test piles shall measured and paid separately) 158 M & L for carrying out Routine load Test (Vertical load)all as per IS 2911 (Part 4) 2013 for 600 mm dia cast in situ piles including mobilising and removing the testing equipments from site after testing is completed 159 Testing of piles Initial load test (verticle load test) for 450mm dia cast in situ bored piles all as per IS including removing the testing equipments from the site after testing is completed all asspecified and as directed 160 M & L for carrying out Initial Load test (lateral load test) cast in situ piles of 450 mm dia as per IS 2911 (Part 4) 2013 including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(Note:- Providing and installing test piles shall measured and paid separately) 161 M & L for carrying out Initial load test (pull outtest as per design load)of cast in situ piles of 450 mm dia as per IS 2911 (Part 4) 2013including mobilising and removing the testing equipments from site after testing is completed all as specified and directed.(Note :- Providing and installing test piles shall measured and paid separately) 162 M & L for carrying out Routine load Test (Vertical load)all as per IS 2911 (Part 4) 2013 for 450 mm dia cast in situ piles including mobilising and removing the testing equipments from site after testing is completed

BRR : 9100901 Tender For Rural Water Supply Scheme For Village Amjara, Panchayat Amjara Of Block-Dungarpur Dist Dungarpur Through Fhtc Under Jal Jeevan Mission., 1 Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended upto date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382- 1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge.excluding earth work)Note : Providing and fixing of all requisite specials as perdrawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately 2 80 mm dia 3 100 mm dia 4 150 mm dia 5 200 mm dia 6 250 mm dia 7 Providing, lowering, laying in trenches, aligning, fixing in position and jointingDuctileIron(DI)ISI markedK-9 gradeS&Spipesas per IS:8329-2000 (amendeduptodate),with internalcementmortar lining suitable for potablewater with rubber ring (EPDM)joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges,including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately. 8 100 mm dia 9 150 mm dia 10 200 mm dia 11 250 mm dia 12 Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work).Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in Meter measurement of the item and shall not be paid separately. Supply may be in coil or straight length in 6 M/12 M.HDPE PE-100 PN-6 (Dia in mm) 13 75 mm dia 14 90 mm dia 15 110 mm dia 16 Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by butt fusion/ electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work).Note : Providing and fixing of all requisite specials as perdrawing, design and layout are inclusive in Meter measurement of the item and shall not be paid separately. Supply of pipe shall be in straight length in 6/12 M.HDPE PE100 PN-6 (Dia in mm) 17 125 mm dia 18 140 mm dia 19 160 mm dia 20 180 mm dia 21 200 mm dia 22 225 mm dia 23 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safetyprovisions etc. 24 In all types of Soils 25 upto 1.5 m 26 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable materials for measurements and disposal of unserviceable materials as directed within a lead of 50 Mtr. including required all safety provisions etc.: 27 In Soft Rock 28 upto 1.5 m 29 In Hard Rock (Blasting Required) 30 upto 1.5 m 31 In Hard Rock (Blasting Prohibited) 32 upto 1.5 m 33 Dismantling of flexible pavement for pipe line line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters.Measurement for dismantled trench to be madeas per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work. 34 Bituminous courses 35 Granular courses 36 Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasksas per technical specification and scope of work. 37 Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be madeas per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified,complete work as per technical specification andscope of work. 38 Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 39 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confiMetering to BS- EN1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS (AISI 316 or equivalent) Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confiMetering to IS:1363 and IS: 1367 (Galvanised steel) Insersion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge.Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 40 80 mm dia 41 100 mm dia 42 125 mm dia 43 150 mm dia 44 200 mm dia 45 250 mm dia 46 Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specificationscompleteofthefollowingsizes includingall jointing material,costofalllabour,testingandcommissioning Technical Specifications and as per direction of Engineer. Class PN 1.0 47 80 mm dia 48 100 mm dia 49 125 mm dia 50 150 mm dia 51 200 mm dia 52 250 mm dia 53 Providing, Supplying and fixing of D/F DI Pressure Reducing Valve in pipe line including jointing etc. complete as per standard/ technical specification and direction of Engineer-in-Charge. 54 100mm diameter 55 Construction of Sluice Valve Chamber in required size and shape as per drawing including required excavationof earth in all types of soil such as murrum, sand, sandy silt, black cotton soil, hard soil, kankar and all types of rocks etc.,disposing of surplus excavated material within a lead of 50 meters. The work includes laying of 100 mm thick plain cement concrete 1:4:8(1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) in bedding and foundation, construction of 150 mm thick RCC walls in M-20 grade C.C., covering it withcovering it with class -A loading ferro cement covers of required sizes and complete with removal of excess material and making clean the site upto the satisfaction of Engineer in chargematerial within a lead of 50 meters. The work includes laying of 100 mm thick plain cement concrete 1:4:8(1 cement : 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) in bedding and foundation, construction of 150 mm thick RCC walls in M-20 grade C.C., covering it withcovering it with class -A loading ferro cement covers of required sizes and complete with removal of excess material and making clean the site upto the satisfaction of Engineer in charge 56 60cm x 60cm x 75cm (depth) for 80/100/125/150 mm dia valve 57 1200cm x 1200cm x 1300cm (depth) for 80/100/125/150 mm dia valve 58 Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Double Acting Kinetic Air Valve with isolating Sluice Valveof approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amendedupto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1.HP Orifice-HTB2/ SS,Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS 6418,Fastners - CS, Epoxy paint inside outside of food grade safe for drinking water,Valves including all mateial, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of connecting tee, pipe piece and earth work. 59 Class PN 1.6 60 50 mm 61 80 mm 62 Supply, installation, testing and commissioning ofMNRE approved Grid tied Solar Panels with inverter, meter, cable etc. suitable for Rooftop installation as well as Utility Scale Solar Power Projects with 25 years of Linear Generation warranty. Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation ofPV module on MS frame as per approved design and drawings. Mountingstructure shall be suitably designedto withstand wind velocity up to 150km/hr.Grid Tie Transformer less inverters, Multiple independent MPPTs, Peak efficiency of >98%. Connect up to multiple strings PV arrays, Easy & fast connection, Built-in string-level monitoring, IP65 protection level, Wi-Fi / internet based remote monitoring with 5 years warranty. All cabling up to panel and metre, earthing etc. required accessories and taxes are inclusive. The work shall be executed as per detailedtechnical specifications, approved drawing and direction of Engineer in Charge.Note: There shall be 5 year service warranty for panel, inverter, meter, cable etc. and suitable provision shall be included in tender document. 63 Supply, installation, testing and commissioning ofMNRE approved Grid tied Solar Panels with inverter, meter, cable etc. suitable for Rooftop installation as well as Utility Scale Solar Power Projects with 25 years of Linear Generation warranty. Work includes designing of solar panel area and MS frame and foundation on ground/roof of Pump house or CWR, showing arrangement of panel in available space, installation ofPV module on MS frame as per approved design and drawings. Mountingstructure shall be suitably designedto withstand wind velocity up to 150km/hr.Grid Tie Transformer less inverters, Multiple independent MPPTs, Peak efficiency of >98%. Connect up to multiple strings PV arrays, Easy & fast connection, Built-in string-level monitoring, IP65 protection level, Wi-Fi / internet based remote monitoring with 5 years warranty.All cabling up to panel and metre, earthing etc. required accessories and taxes are inclusive. The work shall be executed as perdetailedtechnical specifications, approved drawing and direction of Engineer in Charge.Note: There shall be 5 year service warranty for panel, inverter, meter, cable etc. and suitable provision shall be included in tender document. 64 Work includes designing of solar panel area and structure, showing arrangement of panel on rectangular OHSR with flat roof/ MS fabricated structure with polyethylene tank 65 120cm. high fencing with angle iron posts 50x50x6mm. placed at every 3 Mtr. apart 30cm. in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner & every tenth posts to be strutted with 50x50x6mm angle iron provided with three horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with G.I. staple including earth work in excavation etc. complete. 66 In flates, tees, angles & Channals 67 Providing and fixing 1.2 metres high GI barbed wire fencing with 1.8 m angle iron posts 40 mm x 40 mm x 6 mm placed every 3 metres center to center founded in M15 grade cement concrete, 0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwovenwith horizontal wires, fixed with GI staples, turn buckles etc complete as per clause 807 of MoRTH specification & type A as per IS : 278-1978 size designation 5 (line wire 2.24, point wire 2.00mm mass 97-106 g/m) includiing all material, labour. 68 Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg.including all jointing material as per specification with safety cover. 69 Providing, installation, testing and commissioning of submersible monoblock pump set conforming to IS 8034 and2 pole motor operating at syncronised speed of speed 3000 RPM, with water proof winding. Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz AC and with water lubricated bearing to accept entire hydraulic thrust. Supply, with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust. The pump set shall be suitable for direct coupling, with suitable suction strainer. Pump should have suitable discharge out let as per manufacturers design. Antithrust stream lined non return valve shall be provided with the pump and minimum 6 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump etc. completein all respect as perspecification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions mentioned in TD. 70 2.2 KW 71 3.7 KW 72 5.5 KW 73 7.5 KW 74 9.3 KW 75 11.0 KW 76 15.0 KW 77 Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB, DOL starter, overload relay, ampere meter, volt meter, phase preventer,phase indicators, lighting arrangement etc complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 300mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18 and double door including in built locking system.The legs should be embedded in M-15 cement concrete platform. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level.The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. 78 Up to 5.00 HP 79 Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay,ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM).All these equipments shall be housed by panel box made out from 18 gaugeM.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18 and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. 80 Above5 HPand upto 10 HP 81 Above 10 HP and up to 15 HP 82 Above 15 HP and up to 20 HP 83 Above 20 HP and up to 30 HP 84 Supply & Fixing of ISI marked three core PVC flat submersible cableas per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980including makingconnection etc. 85 3 core 4.0 Sq.mm 86 Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. asrequired of size. 87 10.0 Sq. mm 4 core 88 Providing & Lowering in tube well ISI marked GI Pipe “B class as per IS:1239 or amendedup to date threaded and double flanged (welded) on both ends and two number25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete inall respect. 89 32 mm dia 90 50 mm dia 91 65 mm dia 92 80 mm dia 93 Providing, lowering, aligning, fixing in position in pipe line, CIdouble flangedDual plate check valave of approved make of following Pressure rating & dia complete,as per API: 594/ API: 598 and of following specifications:Body & Cover of Grey cast iron ofIS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (food grade quality) ,Body seat of SS ,Face to face dimensions as per API: 594 ,Flanges Drilled as per IS:1538.Epoxy (Non-Toxic & suitable for drinking water) applied on body & coverinside and outside .Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,SpringSS AISI 316/304 , Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR O ring seal.Nut-Bolt confirming to IS:1363 and IS: 1367 (galvenised steel) ,Insersion rubber of black EPDM 6mm thick .Suitablesupport structure as per directions of EICincluding jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.Note: Rates are exclusive of tail piece/ dismantling jointsand earth work.as per API: 594 and flanges as per ISS of approved makeof following Class and dia complete including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 94 Class PN 1.0 95 100 mm dia 96 Providing, lowering, aligning, fixing in position in pipe line, DIdouble flanged resilient seated Dual plate check valave of approved make of following Pressure rating & dia complete,as per API: 594/ API: 598 and of following specifications: Body & Bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalentgrade as per IS :3896-part2-1985 and subsequent revisions, Disc / plates - SG-400/12 or CF- 8M,Face to face dimensions as per API: 594 , Flanges Drilled as per IS:1538. Electrostatic Epoxy Powder(EP-P) / Fusion Bonded Epoxy (Non-Toxic & suitable for drinking water) coated with minimum thickness of 250 micron applied on body and cover inside and outside.Disc seal ring of EPDM/ Neoprene (food grade quality) and disc seal retaining ring of SS/CS. Shaft of SS- AISI- 304/410 , Hinge SS AISI 316/304,SpringSS AISI 316/304,Bonnet Gasket EPDM ,Bush- Brass with EPDM/NBR O ring seal, Nut-Bolt confirming to IS:1363 and IS: 1367 (galvenised steel) ,Insersion rubber of black EPDM 6mm thick .Suitable support structure as per directions of EICincluding jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Class PN 1.6 97 80 mm dia 98 100 mm dia 99 125 mm dia 100 150 mm dia 101 200 mm dia 102 250 mm dia 103 SITC of Bulk Flow Meter with removable mechanism class B confirming to ISO:4064:2005/ IS: 2373of approved make of following dia sized pipelines and specifications complete: Media : Water (Clear ), Temp. 50 deg., Pr. rating: PN16, Protection type: IP- 68,Body Material : IS-210 Gr. FG-200, Accuracy Class :Class B (±2 % @ Nominal flow rate), Magnetic Drive,Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.Note: Rates are exclusive of tail piece / dismantling joints and earth work. 104 80 mm dia 105 100 mm dia 106 125 mm dia 107 150 mm dia 108 200 mm dia 109 Providing , lowringlaying , aligninng, fixing in position at all level/ depthC.I. class-B specials as per IS:1538, amended up to date in trench complete including all material, labour, testing and commissioning along with pipe line/ appurtenance as per Technical specification and as per direction of Engineer( Note:- E/W to be measured and paid seperately) plain ended CI specials including tail pice, spigot end and socket end. 110 Upto 300mm 111 GSM Modem for SMS Facility- 24 V DC operated for bulk flow meter to transmit reading offlow meter to LCC/MCC Centre 112 Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holdingthe riser pipe assembly of submersible pump set. 113 Construction and commissioning of RCC INTZE type Over Head Service Reservoir offollowing capacity and staging as per the Scope of work and Technical specifications, consisting of the following main activities: - 114 a) Topographic survey, preparation of site contour plan, conducting SBC testand its approval from departmentbefore construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction.b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR.The plinth protection shall consist of 150mm thick PCC in M- 15 grade concrete laid over 150mm thick layer of compacted soil.d) Providing and applying two coats of food grade epoxy paint on the inside surface on the top dome, edge beam and 600 mm height of the vertical wall.e)Conducting successfully hydro test and water tightness test as per I.S. code.f) Providing and applying three coats of anti-carbonation paint on the top surface of the Top Dome.g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc..h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top dome/Slab to bottom dome/Slab inside container.i) Providing and fixing of MS section ladder from the last landing to balcony having railing all around it and MS ladder with safety cage from balcony to top dome/slab.j) Providing and fixing water level indicator (float type). 115 k) Providing and fixing of hand railing all around the balcony, top dome and staircase consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.o) Lighting arrestor consisting of providing and fixing of 2 Nos.of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm.p) CI/DI puddle collar shall be fixed in the bottom dome/ slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately. 116 Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II20 M Staging 117 100 KL, staging Height 20 m 118 150 KL, staging Height 20 m 119 200 KL, staging Height 20 m 120 100 KL, staging Height 20 m 121 300 KL, staging Height 20 m 122 400 KL, staging Height 20 m 123 Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II18 M Staging 124 100 KL, staging Height 18 m 125 150 KL, staging Height 18 m 126 200 KL, staging Height 18 m 127 250 KL, staging Height 18 m 128 300 KL, staging Height 18 m 129 400 KL, staging Height 18 m 130 Construction and commissioning of RCC flat slab Over Head Service Reservoir of following capacity and staging including all material and labour charges as per the Scope of work and Technical Specification, consisting of the following main activities: - 131 a) Topographic survey, preparation of site contour plan, conducting SBC testand its approval from departmentbefore construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction.b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR. The plinth protection shall consist of 150mm thick PCC in M- 15 grade concrete laid over 150mm thick layer of compacted soil.d) Providing and applying two coats of food grade epoxy paint on the inside surface roof slab, and 600 mm height of the vertical wall.e) Successfully hydro test and water tightness test as per I.S. code.f) Providing and applying three coats of anti-carbonation paint on the top surface of the roof slab.g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc.h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top Slab to bottom Slab inside container.i) Providing and fixing of MS section ladder from the last landing to balcony and MS ladder with safety cage from balcony to top slab. 132 j) Providing and fixing water level indicator (float type).k) Providing and fixing of hand railing all around the balcony, roof and staircase, consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.o) Lighting arrestor consisting of providing and fixing of 2 Nos.of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mmp) CI/DI puddle collar shall be fixed in the bottom/slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately. 133 Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II & STAGING 15 M 134 50 KL, staging Height 15 m 135 75 KL, staging Height 15 m 136 Providing Household Tap Connectionas per technical specification and approveddrawing asperrelevantIScode(amendeduptodate)from HDPE/uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP mechanicalIntegrated saddle with inbuilt flow control valve made out of SS316 designed for 5 LPM discharge at 0.5 bar pressure , not exceedingtheflowof7LPMat2barandacompressionelbow, mouldedinsingle piece(Completejob)includingdiggingoutsuitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming/compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specificationfor potablewaterincludingGMFull-wayValve(IS:778 Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipe PE 80PN16asperISO4427/20mmnominal diaPPR-C(Three layered) pipe PN16 SDR7.4 (IS:15801:2008)(ISI mark)and above ground level using PPR-C pipe with standard PPR fittings/ GI pipes in the premisesforfixinga tap/ meterbox (excluding),including accessories withflushing,cleaning, disinfectingandtestingofpipelinecomplete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note:Roadcutandrestorationisnotpartofthis itemandpaid separately. 137 For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr. 138 Providing and fixing ISI mark (IS 9763: 2000 or amended upto date) PTMT bib cock 15 moinal bore minimum weight 92 gms and length 100 mm as per technical specification,approved make and direction of Engineer in charge. 139 Road cutting for house hold service connection in minimum trench width whereever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be doneby using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CC M-30 grade as per specification and direction of Engineer in charge.. 140 Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be madeas per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified,complete work as per technical specification and scope of work. 141 M20 grade Nominal Mix 142 Add extra over item no 1.21 & 1.22 for providing20 mm PE80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. 143 Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil asdirected with in lead of 50 mtr. All kinds of soil. 144 Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All workto plinth level usingcrusher broken aggregate 145 M10 grade Nominal Mix ( with graded stone aggregate 20mm nominal size) 146 M15 grade Nominal Mix ( with graded stone aggregate 20mm nominal size) 147 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases ofcolumns etc. 148 P & F on wall face A.C. pipes (IS : 1626 part-I mark) of approved make with wooden plugs and M.S. clamps, jointing with spun yarn soaked in bitumen and C.M. 1:2 complete includingmaking good the wall.: 100mm dia. 149 Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required such as duck foot bend, bend, tee etc. providing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope of work. 150 100 mm dia 151 150 mm dia 152 200 mm dia 153 250 mm dia 154 Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-incharge.MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) 155 Earth work in excavation over areas (exceeding 30cm depth, 1.5 mtr in width and 10 SQM in plan)for construction of open well, lift up to 1.5 Mtr. including taking out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 meter. All kinds of soil. 156 From0 m to 1.5 m BGL 157 Ordinary rock 158 From1.5 m to 6 m BGL 159 Hard rock (requiring blasting) usefulmaterial 30 % 160 From6 m to 7 m BGL 161 From7 m to 20 m BGL 162 Add extra over item No 1 for every additional; lift of 1.5 m or part thereof. 163 All Kind Of soil 164 In Ordinary Rock 165 In hard rock 166 From4.5 m to 6.0 m BGL 167 From6.0 m to 7.5 m BGL 168 From7.5 m to 9.0 m BGL 169 From9.0 m to 10.50 m BGL 170 From10.50 m to 12.0 m BGL 171 From12.0 m to 13.50 m BGL 172 From13.50 m to 15.0 m BGL 173 From15.0 m to 16.50 m BGL 174 From16.50 m to 18.0 m BGL 175 From18.0 m to 20 m BGL 176 Add 20% extra over item No. 2.39 for excavation in saturated soil where pumping or baling out of water is required, including shoring strutting where required and dewatering.(Respective applicable rates)From6 m to 18 m BGL 177 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for :Walls (any thickness) including attached pilasters,buttressesplinthandstring course.Add extra for shuttering in circular work in plan up to dia 10m over item Nos. 4.7.1 to4.7.2 178 Addextra for shuttering in circular work in plan upto dia 10m on item no. 4.7.1 179 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floorthree level. 180 Thermo-mechanically Treated bars (Conforming of relevent IS code) 181 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost ofcentering, shuttering and reinforcement. 182 Walls (any thickness) including attached pilasters buttresses, plinth and string courses filletscolumns pillars pears abutments posts struts etc. 183 M20 Grade nominal mix (with graded stone aggregate 20mm nominal size) 184 Structural steel work in single section fixed with connecting plate includingcutting hoistingfixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr. height 185 Filling available excavated earth (excluding rock) in trenches plint side of foundation etc. in layers not extending 20cm in depth, consolidating each deposited layer by ramming &watering including lead upto 50m. 186 Labour charges for horizontal boring 100 mm dia in open well in rocky stratawith all types of rock cutting & drilling tools etc. including all T&P required for job including dewateringarrangement. 187 Supply laying and pushing of MS casing pipe of specified thickness approved by concerned department authority by trenchless method adopting any suitable technology below ground at required depth under running traffic condition as per Highway/ Railway standard including carrying out survey work at the job site for determining underground cable trenches like telephone, cable, water & sanitary lines and resistivity test for finding the soil strata using necessary equipments for completion of works, mobilizing of machineries and specialized crew at the job site complete in all respect, including excavation of driven pit and exit pit (up to 3 meter depth) with proper protection at these sites with shoring sheets and ISMB. Providing MS cutting edges for front shield and constructing thrust bed at designated level. Necessary dewatering and providing concrete foundation at the base of the driven pit, PVC/Rubber saddle as per the requirement of Highway/Railway authority, crane for handing of pipe and any other machinery, tools, and tackles required, construction of temporary works as per design, drawing and method as per approved byauthority specification and the direction of the Engineer.Apply corrosion, resistant, protection on inside and outside of casing pipeas per technical specification.300 mm Dia 8 mm thick casing pipe with protective coating. 188 AIR PILLAR 189 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter.All kinds of soils 190 upto 1.5 mtrs 191 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). 192 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement.M20 grade Nominal Mix / Design MixProviding M-25 grade concrete by using min 410 kg of cement per cum instead ofM-20 grade design mix. 193 Providing and laying in position specified grade of cement concrete for RCC structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required) excluding the cost of centering, shuttering and reinforcement for Walls (any hickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.M20 grade Nominal Mix / Design Mix 194 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases ofcolumns etc. 195 Footing PCC 196 Base Slab 197 Pillar below GL 198 Total 199 Columns, pillars, posts and struts etc. (Pillar above GL) 200 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. Thermo-mechanically Treated bars (Conforming of relevent IS code) 201 River/Canal Crossing Estimate 202 Earth work in excavation over areas (exceeding 30cm in depth, 1.5 Mtr. in width as well as 10 Sqm on plan) including disposal of excavated earth lead up to 50m and with all liftdisposed earth to be levelled and neatly dressed: 203 Pumping out water caused by springs, tidal or river seepage, broken water mains or drainsand the like with pumping set of following H.P. including P.O.L./Power consumption etc. complete. 204 5 - 9 HP 205 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 206 M10 grade Nominal Mix (with graded stone aggregate 20mm nominal size). 207 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints excluding the cost ofcentering, shuttering and reinforcement. M25 208 Footing 209 Column upto GL 210 Column above GL 211 Subtotal 212 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 213 Centering and Shuttering with plywood or steel sheets including strutting, propping bracingboth ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level. 214 Footing 215 Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for : 216 Column 217 Columns, pillars, posts and struts etc. 218 Providing and fabricating reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. 219 Thermo-mechanically Treated bars (Conforming of relevent IS code) 220 Provision for construction of switch room of size (4m x 3 m) 221 Earth work in excavation over areas (exceeding 30 Cm. In depth, 1.5 Mtr. In width as well as 222 Random Rubble stone masonry for foundation and plinth in cement sand mortar above 30cm thick wall in 223 In cement mortar 1:6 (1 cement : 6 coarse sand) 224 Honey comb brick work 23 cm thick with bricks of class designation 75 up to third storey in : 225 Cement mortar 1:4 (1 cement : 4 coarse sand) 226 Deduction of Door 227 Deduction of Window 228 Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc.complete fine finish : (12mm thick) 229 1:4 (1 cement :4 fine/ coarse sand) 230 Deduction of Door 231 Deduction of Window 232 Cement concrtete grade 1:2:4 (1 Cement: 2 Coarse sand : 4 graded stone aggregate ) 233 75mm thick with 20mm thick nominal size aggregate 234 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishingand reinforcement: 235 M20 grade Design mix (with weight batching plant only) 236 Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strapbeams, bases of columns , etc. up to plinth level. 237 Wall (any thickness) including attached pilasters, buttresses, plinth and string course 238 Suspended floors, roofs, landings, balconies and access platform. 239 Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing inposition and binding all complete 240 Thermo-Mechanically Treated bars 241 Providing & fixing door, window, chowkhats and other frames, including antitermite treatment,M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade : Sheesham wood Grade-1 242 P & F IP-65 protected street light luminaire on existing bracket suitable for HPSV/ MH LAMP, made from powder coated single piece pressure die cast aluminium housing, electrochemically brightened and anodized POT optics aluminium reflector, heat resistant and toughened glass cover and accessories like copper ballast, electronic ignitor, capacitor, holder prewired up to terminal block etc. as required including making connection testing etc.as required(without lamp) 243 Street Light Suitable for HPSV Lamps1 X 150 Watt 244 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked( IS:9537 P - II ) rigid steel conduit & its accessories, round tiles,18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board& false ceiling point,6 A switch, 3.0 mm thick ISI markedphenolic laminated sheet, pvc bushes, check nuts, zinc plated / brassscrews, cup washers, making connections, testing etc. as required.Group-III 245 Short point (up to 3 mtr.) 246 Medium point (up to 6 mtr.) 247 Providing and fixing, flush door shutters non decorative type (hollow core construction) with internal frame of Ist grade wood having styles and top rails of 100 mm width & bottom and lock rails of 150 mm width with 3 Nos. cross battens of 50 mm thick width using 4 mm thick commercial ply on both faces of shutters & 6 mm thick beading of respective wood using with approved steel fitting as perAnnexure A :- 248 25 mm thick. 249 Sheesham wood grade – I 250 Wiring of 3/5 pin 6 amp. Light plug point as per PWD specification for electrical Works with ISI marked 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor1.1 kV grade (IS:694) and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) vergin material PVC conduit & its all accessories( J.B. , Bends etc.) , round tiles,18 SWGG.I. box with earth terminal of required size, 6 A switch, 3/5 pin 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet (IS : 2036 - 1995), Al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by Engineer in charge, making connections, testing etc. complete as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 251 Short point (up to 3 mtr.) 252 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of1.1 kV grade . Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, , in existing surface or recessed PVC/ MS conduit/casing capping including all as per pre approved by Engineer in charge,making connections, etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 253 2 x 1.5 sq.mm

BRR : 8034303 Construction And Development Of Working Women Hostel At Kanchanwadi Chhatrapati Sambhajinagar- 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) 2 Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means 3 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means 4 Excavation for foundation in Hard-rock by blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (Lift from 1.5m To 3.0 m) By Mechanical Means 5 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steelcentering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 6 Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of clorophyrifos per One Square Metre of vertical surface area covering 10 years guarantee on bond paper. 7 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete 8 Providing and fixing 20 to 25 mm thick rough shahabad box type waterproofing treatment to vertical outside faces of Reinforced Cement concrete walls of basement or underground floor including filling the gap of 25 mm between rough shahabad and R.C.C. walls with cement grout mixed with water proofing liquid Algae proof or other alike with one tile lift method, brushing the joints horizontally with cement slurry mixed with water proofing liquid for width 30 to 35 mm and sloping coping over topmost tile with cement mortar 1:3, butting the bottom most with Cement concrete 1:2:4 mixed with water proofing liquid, curing, with 7 years guarantee on court fee stamp of Rs.100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete) 9 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 10 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 11 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 12 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 13 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 14 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 15 Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 16 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 17 Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15 cmto 20 cm including watering and compaction etc.complete. 18 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 19 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. Complete 20 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 21 Providing and fixing precast R.C.C. frames of door/windows/ ventilators of c/s 125mm X 50mm with 2 bars of 8mm dia. Of steel as r/f . In half brick wall 22 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 23 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. 24 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) 25 Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. 26 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc 27 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete 28 Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete. 29 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 30 Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 31 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 32 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or a directed etc. complete. 33 Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete 34 Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete 35 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity above 1000 to 20,000 litres 36 Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) 37 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete. 38 Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange of approved make including necessary sockets/union nut etc. complete 39 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 40 Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. 41 Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete 42 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. 43 Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete 44 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. 45 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. 46 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75Kilogramwith lid and frame fixed in cement concrete 47 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (MJP-SSR- 2023-24, Bd A1/259) 48 Lift 0 to 1.5 M Cum 140.00 140.00 Excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 M and lifts as below, stacking and spreading as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (MJP-SSR- 2023-24, Bd-A-2/259) 49 Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking as directed by Engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (MJP-SSR- 2023-24, Bd-A-4/259) 50 Providing ISI standard stoneware pipes including all taxes inspectin charges, railway freight, unloading, transoport, stacking,complete.150mm dia. SWG pipe 51 Louvering and jointing in proper grade, alignment standard stoneware pipes with cement joint 1:6 C.M. proportion including unloading, transoport, stacking, necessary excavation and jointing complete. 150mm dia. SWG pipe 52 Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete 53 Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (SSR.Item no. 35.21) 54 Providing and applying interior wall finish luster of approved make on internal wall surface as detailed below Scrapping the surface with emery paper and wipe clean wall primer with brush with mineral turpentine with brush 8 to 10% and oil 15 to 20% with roller and allowing to dry for a period 6 to 8 hours. wall putty with appropriate proportion of water allowing to dry for period 4 to 6 hours. Scrapping with Emery paper 180 and wipe clean. Applyingwall primer with brush with mineral turpentine 8 to 10% and oil 15 to 20% with roller Scrapping Emery paper 320 and wipe clean, interior wall finish luster 1st coat with brush/rubber/spray with mineral turpentine 7 to 9% and Oil with roller 19 to 21% After 8 hours of activity Applying 2nd coat or wall finish Lustre with mineral turpentine 7 to 9 % with brush and Oil with roller 19 to 21% after allowing dry for the period of 6 to 8 hours activity. (With prior approval of S.E.) 55 Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 56 Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete. 57 Transportation of surplus material from work site to any disposal place as directed by Er.incharge eith a lead of 5km including and stacking completed. 58 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. 59 Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. 60 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi- strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surfaceand nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated,Hex head, self-drilling screw etc. complete. (weight of profile 61 Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 year guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete 62 Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x 60 mm.and sill of 75mm.x 25 mm.and newel posts for staircases, including fabricating, fix-tures, erecting, painting the grill work with one coat of anticorrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish 63 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. 64 Providing, applying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fire resistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rods etc. overall weight of the ACP shall not be less than 7.5 Kilogram/ One Square Metre) 65 Providing and preparing kitchen otta up to 75 cm width, made up from 30 mm thick and 75 cm high vertical support for kadppa at 1 m. c/c of 25 mm thick both side polished kadappa middle shelf and bottom of 20 mm thick one side polished kadappa with facia patti of 20 x 50 mm kadappa including all material labour cutting fixing with cement mortar and araldite curing polished and cleaning etc. complete. 66 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc.complete 67 Providing and fixing 15 mm thick eco-friendly densified edge calcium silicate false ceiling of approved texture of size 595mm x 595mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanising at @12 gm/sq.m including both sides) consisting of main T runner suitably spaced at joints to get required length and size 24X38mm. made from 0.33mm thick (minimum) sheet, spaced 1200mm center to center and cross T of size 24X28mm made of 0.33mm thick(minimum ) sheet to be interlocked at the middle of the 1200x600 mm panel to form the grid of size 600x600mm resting on periphery walls/partitions on a perimeter wall angle precoated steel of size 24x24x3000 made of 0.4 mm thick (minimum) sheet with the help of all plugs at 450mm and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (spintone/cosmos/hexa) in the grid, including light fittings, fixtures, smoke detectors etc., wherever required. Main T runners suspended from ceiling with using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling using 12.5mm dia. And 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel levels clips of size 85x30x0.8mm, spaced at 1200mm center to center along main T bottom exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete.(currently this item should be used only for VIP cabins) 68 Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec.One Number: As directed by Engineer- in-charge. 69 Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe ( Rezan/ concentiDeleted ire 0.75 mm dia ) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete. 70 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method ( excluding reinforcement) approved by Engineer-in-charge. 71 Single Bed @ 2025LX 1000DX 650HProviding and fixing Single Bed of Size 2025Lx1000Dx650H with matress and pillow.Understructure: - The legs are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2 mm. The legs should have corner brackets welded to it at two levels. The corner brackets are made of 2mm thick CRCA having a L shaped structure to join the side panels and headboard to the leg. Three nos. of Horizontal stiffeners are provided at equal intervals. The stiffeners are made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. The middle Horizontal Stiffener has a leg attached to it to transfer the load to the ground and add to the strength and stability of the complete structure. This leg is also made of Square tube of size 25 x 25mm made out of MS with a thickness of 1.2mm. All Metal components to undergo 7 tank treatment process and should be powder coated to the thickness of minimum 50 Microns DFT.Side Panel: - The side panels are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The overall width of the side panel is 150mm. The side panels have 18mm thick prelam particle board Baton running for required length to add rigidity to the structure. Head Board :- The head board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 650mm. Foot Board :- The foot board is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The head board size to be considered as 1000 x 450mm.Bed Base: - The Bed Base is made up of 12mm thick Prelam Particle Board with both side laminate 72 Bed Side Table @ 400LX 400DX 415HProviding and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding 73 Wardrobe with Mirror @ 900LX 600DX 1965HProviding and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe side panels and doors are made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The shelves are made of 18mm thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36mm prelam particle board with decorative laminate on both sides. (18mm Prelam Particle board and 18mm batons on all sides to achieve 36mm overall thickness). The exposed edges of the top are sealed with 2mm thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required. 74 Providing & Arrangemnt of Mid Back, ECO CTS Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery 75 NOMAD Interactive Screen: Providing and Fixing NOMAD Interactive Screen with storage. Specification size : 1260L X 500D X 1800H. Prior approval of Engineer in charge in necessary. 76 Providing & Arrangemnt of MId Back, Normal SyncroMechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery. 77 Café Chrome 6 Seater Canteen tableSpecification : 1800L x 900D x 750H. Prelam Hydroshield Top with MS Understructure in Chrome finish 78 Tango Cafeteria Chair* Stackable Chairs* Without Arms* One Moulded Unbreakable Chair* Available Colors - White, Black, Green, Yellow, Red. 79 Double Bed (Compact 2 Nos.) Specification : 1980L X 900D X 450-750HMade inPrelam board with understorage 80 Full Height Steel Storage @ 750Lx450Dx2100HTProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. 81 Sofa Set 3+1+1Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length: 182.5 (cms) Breadth (cms): 100 (cms)Height (cms): 100 (cms) Weight (Kilograms): 66 (Kilogram) Seating Capacity: Five Seat 82 4 Seater Dining TableSpecification : 800L x 800D x 750H.Prelam Hydroshield Top 83 Stool for Lab and Class-IVProviding and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. 84 Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT Providing & Fixing Curviliner Workstation @ 1500/1500Lx600/600Dx750HT, Curvilinear Table Top @ 1500/1500Lx600/600D :- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, GABLE END to be made of 25 mm thick Prelaminated particle board with PVC edge band, KEYBOARD TRAY (WITHOUT MOUSE TRAY ) :- Metal Powder Coated - Black Color, CPU TROLLEY :- Metal Powder Coated - Black Color, along with 3 DRAWER PEDESTAL UNIT having overall size 392L x 450D x 680Ht. mm. with central lock and key. 3 Drawers and body are complete metal with powder coat finish, facia in 18 mm prelaminated particle board. 85 Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery. 86 Providing & Arrangemnt of High Back Chair - TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GASLIFT FOR HEIGHT ADJUSTMENT. 87 Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments, Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color. 88 Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 89 12 Seater Reading Table for Library @3600Lx1200Dx750HTProviding and Fixing 12 Seater Reading Table for Liberary @ 3600Lx1200Dx750HT Top: made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Gable Ends : made from 25 mm Prelaminated Particle board. All edges are covered by 2 mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine.Modesty panel : Made from 18mm both side prelaminated particle boards.All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. 90 Alluminium foldable ladder for store Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht. 91 Library Area Table @ 1350Lx750Dx750HTProviding & Fixing of FREE STANDING TABLE @ 1350Lx750Dx 750HT:- TOP to be made of 25 mm thick Prelaminated particle board with PVC edge band, BENT LEG to be CHROME FINISH as per drawing. 92 CHILDREN TRIANGLE TABLESize: 1300L x 1300LX1300L x 400H Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 93 CHILDREN CHAIR Size:400LX 400L Specifications Table Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 94 CHILDREN SHELF Size:2560LX 400D SpecificationsTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support:End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 95 Executives Table @ 1800Lx900Dx750HTProviding & Fixing of Table @ 1800Lx900Dx750HT - TOP & GABLE END to be made of Membrane finish with soft water fall edges & curved panel & Decorated Anodized section MODESTY PANEL to be made of 18 mm thick Prelaminated particle board with PVC edge band as per drawing. 96 CHILDREN CRIB Size:1000LX 650D SpecificationsTable Top: 25mm thick Pre laminate particle board with 2mm PVC edge lipping on all exposed edges Support: End Legs: MS powder coated PERFORM 50 X 50 Leg with support beam. Intermediate Legs: MS Powder coated 60X40mm legs And Support Leg on Fixed Pedestal and supporting MS cross beams (40X20 mm) 97 Supplying anderectingPVCtrunking (PVCcasing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON. 98 Supplying anderectingPVCtrunking (PVCcasing-n-capping)ofsize32 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON. 99 Supplying and erecting PVCboxtrunking ofsize50x50 mm. with accessorieson wall/ceiling as per specification No: WG-MA/BOX(1-2-11) 100 Supplying and erecting mains with 2x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) 101 Supplying and erecting green colour earthing with 1x 1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-1) 102 Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 103 Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 104 Supplying and erecting mains with 4x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) 105 Supplying and erecting green colour earthing with 1x 4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-3) 106 Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 107 Supplying and erecting mains with 4x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4) 108 Supplying and erecting green colour earthing with 1x 6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-4) 109 Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-6-1) 110 Supplying and erecting modular type switch 16Aduly erected on provided plate and box with wiring connections complete.(1-6-2) 111 Supplying and erecting modular type 3 pin 6Amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete.(1-6-10) 112 Supplying and erecting modular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete.(1-6-11) 113 Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.(1-6-23) 114 Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box.(1-6-24) 115 Supplying and erecting PVC Surface modular switch box with double mounting plate for 3module duly erected. 116 Supplying and erecting PVC Surface modular switch box with double mounting plate for 6module duly erected. 117 Supplying and erecting PVC Surface modular switch box with double mounting plate for 12module duly erected. 118 Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW 119 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW 120 Wiring for plug on board withSwitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW(1-7-26) 121 Supplying and erectingLED square / circular Max. 25 W down lighter/ Panel Light having pressure die-cast aluminium housing,polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50,including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 122 Supplying and erectingLEDPanel Light(600mm X 600mm) Max. 30 Whaving CRCA powder coated housing,polystyrene diffuser havingsystem lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 123 Supplying and erecting bulk head LED fittingmax. 10Wwith high transitivity diffuser withsystem lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg.,THD<10%,p.f. >0.95, operating range of140-260V, in built surge protection of 2.5 kV, Life class of50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.(2-1-15) 124 Supplying and erecting anodized aluminium corridor / passage / mirror light LED fitting (2 feet) Max. 12Wwith high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%,THD<10%,p.f. >0.95, operating range of200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver with end caps on provided PVC Block / wooden board with 3 years warranty.(2-1-16) 125 Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22Wwith high transitivity diffuser withsystem lumens output ofMin.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%,THD<10%,p.f. >0.95, operating range of200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. 126 Supplying and erecting inverter LED batten 20W tube light fitting with polycarbonate housing, heat sink, integrated HF electronic driver, Min. 2600 mAh Lithium ion Battery with charging time of 8-10 Hours and backup time of Min. 3 hrs. with minimum 25% of initial Watts having luminous efficacy of 100 lumen/watt,CRI>80, CCT of 6500K and THD<=20% havinguseful life of minimum 25000 hrs. with overheating protection with 2 years warranty.(2-1-22) 127 Supplying and erecting ding dong / electronic musical type call bell with heavy duty coilsuitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size.(2-3-13) 128 Supplying and erecting Electronic type cordlesscallbell erected on T.W.board havingportablebellpush working on 9V D.C. battery and(effective range upto 45 meter) bell on 250 V A.C. supply.(2-3-15) 129 Supplying and erecting integrated LED Highbay Fitting70W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics,having system lumens output of Min.10000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification NoFG-ODF/FLS2. 130 Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected, complete.2(-10-13) 131 Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% without IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF(2-10-22) 132 Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan. 133 Supplying and erecting ‘B’ class G.I .pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.(2-11-6) 134 Supplying, erecting, testing and commissioning self contained water cooler 230/250V 50Hz nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. AP-WCR/WC(3-3-9) 135 Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200)(3-5-1) 136 Supplying, installing, testing and commissioning of3 kVA capacity online pure sine wave with backup time of 1 hrs. PWM & IGBT based UPS with 0.9 to unity output pf, single phase input & 1 phase output complete with all protectionsas per specification no. AP-UPS(3-7-3) 137 Supplying and erecting 12V/26Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.(3-8-9) 138 Providing and erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware.(7-11-6) 139 Providing and erecting hot dipped galvanised ladder type cable traymanufactured from 16 SWG (1.6 mm thick) GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware.(7-11-8) 140 Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP(9-1-1) 141 Supplying, erectingandmarking SPMCB 6A to 32A, C-serieswith rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-2) 142 Supplying, erectingandmarking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-3) 143 Supplying, erectingandmarking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-10) 144 Supplying, erectingandmarking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-11) 145 Supplying and erecting triplepole and neutral distribution board (TPNDB),SPMCB of 4 ways/phase(12 poles), with door,1.2mm thickness, surface/flush mounted, IP 43 protection on iron/GIframe (horizontal busbar type) as per specification no. SW-SWR/MCBDB(5-4-1) 146 Supplying&erectingtriplepoleand neutral distribution board (TPNDB), SP/TP MCBs total 8 ways /24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB 147 Supplying & erecting triple pole and neutral distribution board (TPNDB), 3 pole/4 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), withdoor, 1.2mm thickness, surface/flush mounted, on iron/GI frame (vertical busbar type) as per specification no. SW-SWR/MCBDB1 148 Supplying and erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs,with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW SWR/MCBDB(5-4-9) 149 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 150 Supplying, erecting & commissioning 4 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB 151 Supplying, Erecting and Commissioning of4 pole RCCB 40A, electromagnetictype with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB(5-6-5) 152 Supplying, fixing, and commissioning 2 pole, RCBO 6/10/16/20/25A,with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO(5-6-9) 153 Providing and erecting 4 Pole MCCB,100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB(5-5-1) 154 Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 155 Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB(5-5-4) 156 Supplying and erecting metal work in CRCA sheet including Iron work for supportswith fabrication ofboxes,panelboards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment andduly powder coated or paintedwith one coat of red lead paint and 2 coats of enamel paint complete.(6-1-1) 157 Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.(6-1-19) 158 Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard(6-1-20) 159 Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 & Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB 160 Supplying and erecting panelmountingtypedigital ammeterhavingthreeandhalfdigitLEDdisplay, externalCToperated,calibratedfor suitable to operate on 500V, 0 to 1000Ahaving accuracy class of 0.5, AC supply with necessary PVC wire leads and lugs andmounting hardware on provided panel complete with calibration certificate from manufacturer.(6-3-7) 161 Supplying and erecting panelmountingtypedigital voltmeterhavingthreeandhalfdigitLEDdisplay, calibrated for 0 to 750V AC suitable to operate on 500V having accuracy class of 0.5,AC supplywithnecessaryPVCwireleadsandlugsand mountinghardwareonprovidedpanelcompletewith calibration certificate from manufacturer.(6-3-8) 162 Supplying and erecting AC Three Phase Four wire Multifunction Energy Meter of Rating 10 - 60A, Class 1.0 with din rail / Panelmounting to measures and displayparameters with RS485 Modbus communication port. mounting whole current operated meter to measures and display V, I,kWh, KVAh, KW, KVA, P.F, THD, RS 485 Communication port. Electrical parameters shall be available on com port with their mapping address open for third party software(6-3-19) 163 Supplying and erecting selector switch suitable for voltmeter/ammeter for 3 phase AC supply 500V, 50Hz, on provided box / panel and duly connecting with necessary PVC wire leads and lugs. 164 Supplying and erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on providedbox / panelwith necessary material, wiring & connections etc.(6-5-5) 165 Supplying and erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc.(6-5-6) 166 Supplying and erecting 50 kVAr,3 phase, 50 Hz., Power contactors Derated for microprocessor APFC controller with MPP / APP type capacitor with 525 Vand having minimum overcurrent capacity of 1.8 In,peak inrush current capacity 300 Inand minimum life 150000 hours with , consisting of suitable steps of MPP / APP type capacitor units with detuned aluminium filter 7% reactors with circuit breaker as main incomer and MCCB for each branch protection, as per specification no CP-ED/APFC 167 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 168 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core25sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 169 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core35sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL (7-1-31) 170 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 95sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 171 Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete(1-6-15) 172 Supplying & erecting20 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord & grey colour sheathed with FR PVC, conforming to ITD specification S/WS 113C laid in provided PVC casing capping/conduit as perspecification No. WG-TW 173 Supplying & erecting 50 pair, 0.5 mm dia. jelly filled armoured telephonecopper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed havinglaid in provided trench as per specification No. WG-TW 174 Supplying, erecting & commissioningMDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW 175 Supplying, erecting & commissioning 20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW 176 Supplying, erecting & commissioning 10 pair module for connection & disconnection of telephone cable as per specification no. WG-TW(1-9-18) 177 Supplying and installing, testing & commissioning of digital (hybrid) type EPABX of6 x 32 extensions suitable upto 96 extensions complete. 178 Supplying, Erecting and Commissioning ofpush button telephone instrument desk top/wall mount with caller ID & Speaker unit as per specification complete.(1-9-29) 179 Supplying, Erecting and Commissioning ofIP telephone instrument as per specification complete.(1-9-30) 180 Supplying and erecting unbreakable concealed typemodular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.(1-6-34) 181 Supplying and erecting 20m HDMI cord low voltage grademinimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete. 182 Supplying and installingcat-6 cable suitable for networking as per specification no. WG-COC/NC(1-10-1) 183 Supplying and erecting LSZH armoured multimode Optical Fibre Cable with 24 fibres, core dia 50/125 µm (OM4) suitable up to 10 GBPS ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC 184 Supplying and fixing1 m length, UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-Din position as per specification No. WG-COC/PC(1-10-17) 185 Supplying and fixing3 m UTP patch cord of enhanced Cat 6 type with 4-connector channel, performance test report as per ANSI/TIA-568.2-Din position as per specification No. WG-COC/PC(1-10-20) 186 Supplying, fixing, and configuring24 ports with 4 (SFP+) port, ethernet managed switch with web view/CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC/GBS(1-11-4) 187 Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack as per specification No. WG-NWC/ADSL 188 Supplying, installing & testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC.(1-12-1) 189 Supplying and fixing tool-less IO (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO 190 Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP 191 Supplying and fixing9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK(1-12-18) 192 Supplying, installing, testing and commissioning of Commercial Heat pump, having dimension: 1020 x 846 x 1840 (mm), Input power: 6.02 kW, 400 V, 3 Ph, 50 Hz, Output power: 19.8 kW having hot water temperature range 35°C to 52°C and ambient temperature range for max. efficiency 7°C to 43°C, centrally controlled operation, operational noise level: 65 dBA with necessary accessories complete with 5 years ON-SITE warranty. 193 Supplying, installation and testing and commissioning of storage type Mild Steel mixing water tank of capacity 5000 ltrs. tested to a pressure of 8 kg/cm2, insulated with 50 mm thick rock wool with wire mesh around and cladded with 26 SWG aluminium of dish end type with working pressure of 6 kg/cm2, fabricatedwith 6 mm thick plate and dished ends with 8 mm thick plates complete with man hole cover, inner side of the tank coated with FRP coating of 3 mm thickness withstand temperature of 90°C provided with collars of 2 BSP forprovision toinstall6 numbers of electrical heating coils if required with thermal sensors for automatic operation and integrated into the electrical circuits of the circulation pumps and the heat pump with safety valve drain, inlet and outlet nozzle, pressure gauge with all necessary accessories complete. 194 Supplying,erecting, testing and commissioning of10kW, 3 x 3.3 KW AC Electric Vehicle charger (suitable for 2/3/4 wheeler) havingminimum IK08/IP 54 Protection suitable for three phase, 415V AC, 50Hzincoming and 3 nos. output as per IEC 60309 industrial sockets having capacity of output current of 16A 240V ACat each socket with 3.5TFT touch screen for human interface & LED Light for status indication and metering for measurement of consumed energy having metering accuracy +/-1%, one hour battery backup for communication, emergency push stop button and having short circuit, over & under voltage, overload, over temperature, earth leakage protection and enclosure made of minimum 1.5mmduly RAL7035 Coated M.S, Erected oniron/GI frame on provided cement concrete foundation complete with one year on site warranty, confirming toIS 17017 Series as per specification. 195 Supplyinganderecting Biometric Access Control System working on 230V A.C. supply with resetting arrangement complete erected 196 Supplying, erectingandmarking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-11) 197 Supplying, fixing, and commissioning MCB type change over switch 4 pole, 40A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR / MCBCOS(5-3-25) 198 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 199 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL(7-1-27) 200 Supplying and erecting G.I. pipe‘A’ class 40 mmdia.erectedfor enclosingXLPEarmouredcable on wall/poleas per specification no. CB-CE(7-6-2) 201 Supplying and laying (including excavation)of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-9) 202 Providing earthing with galvanizediron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. covercomplete with all materials, testing & recording the results asper specification no. EA-EP(9-1-3) 203 Providing pipetype earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) 204 Supplying and erecting minimum Three & above star rated submersible pump set of 2.25 KW/3 HP with 415 V, 50 c/s AC supply suitable for 100 mm dia. borewell suitable for 60 to 170 LPM discharge at 97 to 30 m head & discharge & delivery pipe of Size-40 mm diameter with a necessary H type clamps as per specification No. WP-SMP 205 Supplying and erecting minimum Three & above star rated submersiblepump set suitable for erection on open well of 3.75 KW/5 HP with 415 V 50c/s. A.C. supply, having delivery head from 43 to 11m and discharge from 120 to 840 litres. per minute & pipe of Suction 65mm / Delivery 50 mmdiameter erected with necessary H type clamps as per specification No. WP-OSP(12-3-2) 206 Supplying and erecting D.O.L Starter suitable for 415 V, 3 phase 50 cycles with no volt coil and overload elementwith necessary materials and connected to supply up to 7.5 H.P.(12-4-2) 207 Supplying and erecting flat flexible 3 core 2.5 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.(12-4-8) 208 Supplying and erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.(12-4-9) 209 Supplying and erecting Water level controller 230/415 V, A.C. , Four way under ground & Over head tank operation only.(12-4-15) 210 Supplying and erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible/centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .(12-4-17) 211 Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay/earth plate / for laying cable/ pipe & clearing the site by removing debris & making the site as required complete.(16-1-5) 212 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 213 Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB/GP.(16-5-6) 214 Supplying and erecting high density polythene pipe ISI mark 50 mm. dia. suitable for pressure of 6 kg. / cm2 connected tojet/submersible pump with required material complete.(16-5-18) 215 Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete.(16-6-15) 216 Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.(16-6-21) 217 Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB(5-5-4) 218 Supplying, installation, testing and commissioning extendable/non-extendable indoor type 11 kV, 630A,load break switch, compliant to IEC 62271 -100, 200 and 102, on provided MS channels/trench/foundations per specification no SW-HTS / LBS 219 Supplying and erecting GI sheet 1.6mm (16 SWG) caution board of size 250 x 200 mm duly painted with red oxide and enamel paint in Marathi, Hindi and English erected at position for HV/EHV (11000 Volts) installation with compliance to IS 2551-1982(6-1-16) 220 Supplying,erecting,testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paintof required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 50/5A to 200/5A, VA 10 or 15, Class 0.2S, epoxy casted 3 nos. PT having ratio 11000/V3/110/V3 VA 50, Class 0.2 suitable for provided trivector meter, andprovision for incoming and outgoing cables complete duly tested by licensee with necessary test certificatesand erected on provided plinth/ cc foundation. 221 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core300 sq. mm. aluminiumconductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 222 Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 150 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT 223 Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT 224 Providing and erecting Heat shrinkable outdoor termination kit for 11 kV ( E ) XLPE HT cable 3x120 to 185 sq. mm. with necessary material as per specification no. CB-JT/HT 225 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 226 Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ(8-1-13) (11 mtr x 2 Pole =22) 227 Supplying and erecting single pole cut point channel set of for 11kV HT OH line two channel of size 100x50x6mm 1.6m long having stud angle of size 50x50x6mm 1.5m long with necessary clamps, nut bolts etc. complete as per drawing.(8-3-17) 228 Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI 229 Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete asper specification no. OH-INS/PN 230 Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS/LA 231 Supplying and erecting pole clamp made from 50x6mm MS flat for pole or pipe, post erected with 15mm bolts and nuts duly painted with one coat of red oxide and two coats of aluminium paint complete. 232 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9- 1-1) 233 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) 234 Supplying, installing, testing & commissioning 3 phase,11/0.433 kV,50 Hz., 250 kVA, Mineral oil immersed and naturally cooledoutdoor type, Copper wound, without gas cushioning , hermetically Sealedtransformer, delta/star connected with additional neutral brought out on load side, temperature rise should not Exceed 45℃ by thermometer in oil and 50℃ by the resistance methodin winding at full load rating, with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%, having 7 number of tap positions , with standard accessories complete with test certificate with losses below 980 Watts at 50% load, 2930 Watts at 100%load as perIS:1180 (part 1) : 2014 , with necessary permissions of Electrical Inspector, as per specification no SS- TR-SL 235 Supplying and erecting11 kV outdoor type gang operated airbreak,triple pole switch 400 A capacitywith3postpin type insulator per phase, mounted in horizontalor vertical position with necessary channels on providedcrossarmwithadequate length of C class G.l. pipe for operating handle erectedonextendedsquareshaft. Theoperatinghandle provided with lock and key at suitable heightfrom ground level with necessary clamp. 236 Supplying and erecting, 11 kV outdoor type drop out fuse with insulator complete with fuse holders, fusebarrelwithmetalfitting,fuse elementmounted onM.S.channel with working currentof15A capacity complete erected on provided cross arm. 237 Supplying and erecting fencing of section having size 2450 mm in height from ground level and 1200 mm width with angle iron frame work erected in CC foundation and painted complete as per specification no SS-AS/FSG(10-6-18) 238 Supplying and erecting 50 x 50 x 6 mm angle iron as cornersupport 2m long fixed at the middle ofthefencing frame and the otherside inclined at 30 degree angle, in cement concrete foundation of 15 x 15 x 40 cm complete duly painted with one coat of red oxide and two coats aluminium paint complete.(10-6-19) 239 Supplying and erecting double leaf hinged door each 1500 mm in width x 1850 mm in height using B class, GI pipe with angle iron supports, chain link wire mesh (jali) complete supported on channel iron, erected in foundation, and painted complete as per specification no SS-AS/DLD(10-6-20) 240 Supplying & erecting barbed wire two ply with 12 SWG ply and 12 SWG barb with a gap between two bars of 75 mm. firmly fixed on provided angle supports with necessary materials complete. (6.044 meters/kg.). 241 Providing printed instruction chart for treating persons suffering from electric shock, printedinEnglish & Marathi and duly laminated complete.(10-6-22) 242 Providing pair ofdulytestedrubber hand glovesas per IS :47705suitable forworking up to 22 kV supply complete.(10-6-23) 243 Supplying standardfirst aid box with necessary antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-Aid) adhesive tape for medicinal use, scissors, anti-septic solution, etc. (All above contents shall be of standard makes)(10-6-24) 244 Supplying and fixingPVC synthetic elastomerelectrically insulating matwith class C insulation conforming to IS: 15652 – 2006 tested having 3mm thickness up to 33 kV 245 Supplying shock proof leather safety shoes of electrical grade of standard size as IS :11226, 14544duly tested, with necessary test certificate from manufacturer.(10-6-28) 246 Supplying and spreading stone metal 25 mm size for 100 mm depth above the ground level complete. 247 Excavating hard murum / stone metal roadby chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.(16-1-6) 248 Makingtransformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40mm hard broken aggregate. External surface duly plastered by 12 mm thick including watering etc complete. 249 Makingcement concrete foundation including excavation(60 x 60) cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal,45 cm x 45 cm x 45 cm /45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)(16-3-4) 250 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 251 MSEDCL Charges 252 Providing and erecting 4 Pole MCCB 415V, 400A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure /panel as per specification no. SW-SWR/MCCB(5-5-4) 253 Supplying and erecting SS enclosure for MCCB suitable for above 250 A up to 800A MCCB.(5-11-19) 254 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core300 sq. mm. aluminiumconductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 255 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 200 mm outside dia, double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 256 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9-1-1) 257 Supplying, erecting, testing and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C supply,a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %, with performance class G2 and maximum fuel consumption 42.30 Ltr/hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspectoras per specification no. GEN-DG 258 Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 200 kVA up to 250 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF. 259 Excavating hard murum / stone metal roadby chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.(16-1-6) 260 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 261 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper Industrial cable for voltage grade up to 1.1 kV(1-3-14) 262 Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 263 Supplying and erecting three phase, 415V, street light control panel up to the max load of 6kW, TPN MCB 40A,powder coated CRCA 14 SWG sheet, outdoor type, having IP54,IK10 protection, suitable rating contactor, 24 hrs. astronomical time switch with minimum 5 years battery back up,auto/manual selector switch, ON/OFF push buttons, indicator lamps, control wiring, metering device, etc. for automatic operation, with overcurrent, short circuit, earth fault protectionon provided iron frame / CC foundation.(5-2-5) 264 Supplying, erectingandmarking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kAin provided distribution board as per specification no. SW-SWR/MCB(5-3-1) 265 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 266 Supplying and laying (including excavation)of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete.(7-6-9) 267 Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 268 Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT(8-2-21) 269 Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT 270 Providing earthing with galvanizediron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. covercomplete with all materials, testing & recording the results asper specification no. EA-EP(9-1-3) 271 Providing pipetype earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification no. EA-EP(9-1-4) 272 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) 273 MakingM- 20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity at site as 10 T/sq.mat 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole). 274 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 275 Supplying, installation, testing and commissioning of booster fire pump[BP] suitable for water discharge of 900 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of7.5 kW or of suitable kW capacityfor manual/automatic operation and consisting of following :(a) Horizontal/vertical type, single/multi stage, centrifugal casing pump of cast iron body & bronze/CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520.(b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation onwith IP 55 protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS-325.(c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d)Erected on provided suitable size cement concretefoundation duly plastered with anti vibration pads with perfect aligning, properlevelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP/BP 276 Supplying and erectingG.I. pipe‘C’ class ERW25 mm dia with necessary fittings complete asper specification no. FF-PP 277 Supplying and erectingG.I. pipe‘C’ class ERW50 mm dia with necessary fittings complete asper specification no. FF-PP 278 Supplying and erectingG.I. pipe‘C’ class ERW65 mm dia with necessary fittings complete asper specification no. FF-PP 279 Supplying and erectingG.I. pipe‘C’ class ERW75/80 mm dia with necessary fittings complete asper specification no. FF-PP 280 Supplying and erecting G.I. pipe‘C’ class ERW100 mm dia with necessary fittings complete asper specification no. FF-PP(13-6-6) 281 Supplying and erecting G.I. pipe‘C’ class ERW150 mm dia with necessary fittings complete asper specification no. FF-PP(13-6-7) 282 Providing G.I. pipe‘C’ class ERW200 mm dia with necessary fittings complete asper specification no. FF-PP(13-6-8) 283 Providing coating of bitumen paint &4mm thick wrapping for underground 150 mm ring main of fire fighting system.(13-6-10) 284 Supplying and erecting 100 mm dia cast iron foot valve ball type/flap typewith strainer for negative suction complete asper specification no. FF-VL/FV(13-7-2) 285 Supplying and erecting 100mm dia.castiron double flange sluicevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/SV(13-7-14) 286 Supplying and erecting 150mm dia.castiron double flange sluicevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/SV(13-7-15) 287 Supplyinganderecting200mm dia.castiron double flange sluicevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/SV 288 Supplying and erecting 100 mm diacast iron double flange NRV complete with PN16 pressure rating, asper specification no. FF-VL/NRV(13-7-24) 289 Supplying and erecting 25 mmdiagunmetal gatevalvecomplete with PN16 pressure rating, asper specification no. FF-VL/GV(13-7-32) 290 Supplying and erecting stainless steel single outlethydrantvalve fitted with necessary accessories complete asper specification no. FF-VL/HV(13-7-35) 291 Supplying and installingone piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000litres fitted with necessary accessories complete asper specification no. FF-FFA/PT(13-8-1) 292 Supplying and installingwall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose)along with necessary accessories complete asper specification no. FF-FFA/HV(13-8-2) 293 Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe,15m inlength, fitted with necessary accessories complete asper specification no. FF-FFA/RRL(13-8-4) 294 Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzlecomplete as per specifications no. FF-FFA/NZ(13-8-8) 295 Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete asper specification no. FF-FA/FMC(13-8-11) 296 Supplying and erecting 300 mm dia 1.5min heightair vessel / tankfabricated from min 5mm thick M.S. sheet complete asper specification no. FF-FFA/ACT(13-8-12) 297 Supplying and erecting 20/25mm dia gun metal air release cock, with necessary G.I.coupling to be fitted on top of air vessel or on wet riser complete asper specification no. FF-FFA/ARV(13-8-13) 298 Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete asper specification no. FF-FFA/PG(13-8-14) 299 Supplying and erecting 12/15 mm dia pressureswitchwith provided isolationvalve,G.I. nipple, elbow, etc complete asper specification no. FF-FFA/PS(13-8-15) 300 Supplying and erecting brass orifice plate having 6 mm. thickness, 140 mm outer diawith required diameter of inner hole at every single outlet hydrant valve as per specification no. FF-FFA/OP(13-8-16) 301 Supplying and erecting M.S./CRCA cabinet for housing single hydrant valveof size ( 400 x 400 x 400)mm or hose pipe boxof size (600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mmhaving front doors with viewing glass of size (200x150) mmandlockingarrangement with necessary fixingmaterialsuch as rubber biddingetc. dulypainted in post box red colour( Code 538 of IS 5)(13-8-18) 302 Supplying and erecting M.S./CRCA cabinet forhousing FireBrigade / SIEMESE connections (size 1250 x 400 x 300 mm.) made from 16 SWG sheet andangleiron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8 x 6) andlocking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)(13-8-19) 303 Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½) dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR. 304 Supplying, erecting, testing and commissioning ofvane type water flow detector75/80 mm dia. with1) Visual switch activation 2) Rugged switch assembly 3) Heavy duty aluminium pipe saddles 4)Durable metal enclosure 5) Steel U bolts for secure mounting 6) Two SPDT ( Single pole double track ) synchronised switches 7) serviceable without draining pipes.(13-12-2) 305 Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete.(13-15-1) 306 Supplying, installing, testing and commissioning ofmanual call point (Pill box) with break glass push button andflip abort switch or agent release switch in metal enclosure complete asper specification no. FF-FAAS/MCP(13-9-7) 307 Supplying, installing, testing and commissioning ofhooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multiple sounders to be activated with CRCA enclosure complete asper specification no. FF-FAAS/HTR(13-9-8) 308 Supplying, installing, testing and commissioning ofFRLSXLPE armouredcable 2 core1.5 sq.mm. copper conductorcomplete erected on wall/ ceiling complete asper specification no. CB-LT/CU(13-9-10) 309 Supplying, installing, testing and commissioning of2 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories , 16x2CharacterLCDDisplay, provision for zone wise contact and beep sound alarm, suitable to operate on 120-220 V AC,0 - 49 Deg C,93 ± 2 Percentage RH (non- condensing) at 32± 2 Deg C complete asper specification no. FF-FAAS/FACP(13-9-14) 310 Supplying, erecting, testing and commissioning of120 W amplifiersuitable to operate on 230VoltsA.C. / 12VoltsD.C. supply complete asper specification no. FF-PA/AFR(13-11-1) 311 Supplying, erecting, testing and commissioning of15 to 30 Watts soundcolumn or ceiling mounted complete asper specification no. FF-PA/SOC(13-11-2) 312 Supplying, erecting, testing and commissioning ofstand mounted/handheld type wired microphone having 2 mV/Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metreshielded cable and 3 Pin Professional XLR Connector, stereo jack complete asper specification no.FF-PA/MIC(13-11-3) 313 Supplying, erecting, testing and commissioning ofrust free microphone floor stand of chrome plating/powder coating or S.S. material , 500 mm to 1500 mmheight and sturdy mechanism ensuring trouble free movement complete.(13-11-4) 314 Supplying, erecting, testing and commissioning ofrust free microphone table stand of chrome plating/powder coating or S.S. material,up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.(13-11-5) 315 Supplying, erecting, testing and commissioning of2 core shielded cable complete asper specification no.FF-PA/MCC(13-11-6) 316 Supplying, erecting, testing and commissioning of1.5 sq. mm speaker wire complete.(13-11-10) 317 Supplying, installation, testing and commissioning of 220/250Volts, single phase, 50 Hz Siren of 3.25 km range (Diametrical),horizontaldoublemountingtype of0.5 HP 6000 RPMon C. C.foundation complete as per specification no. SRN-AS/SM 318 Supplying and erecting ABC powder type fire exitinguisher as per IS: 13849/15683 of 6 kg capacity with necessary clamp for erection on wall (Non-CSR) 319 Supplying and Installation auto glow (Viewing up to 15 Mtr length) fire signages in PVC/Vinyl 4/6 mm thick sheet or as per sample approved by client viz fire doors, fire hose box, fire & electrical safety etc. Size 300 mm X 100 mmas per IS 12349-1988 320 Supplying and Installation auto glow (Viewing up to 15 Mtr length) fir signages in PVC/Vinyl 4/6 mm thick sheet or as per sample approved by client viz fire doors, fire hose box, fire & electrical safety etc. Size 450 mm X 100 mm as per IS 12349-1988 321 Providing and fixing of Emergency Exit Lights LED Beam-II with exit high glow LED White lamps working on battery 12 V 7.6 Ah for duration 4-5 hours (approx) wattage of LED lamp is 26 watt each 2 Nos. of lamp total wattage 52 Watts Weight of unit will be 5.4 kg input voltage 220 V AC 50 Hz Output Volatge 12 V DC the outer cabinet is powder coated, for safety purpose DC & AC fuse system is given in unit as per IS 9583-1981 322 Supplying and erectingHMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC. 323 Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. 324 Supplying and erecting 20mm dia. corrugated flexiblepolypropylene conduit 325 Supplying and erecting 10m HDMI cord low voltage grademinimum 4k compliant to be laid in provided conduits with male/female 19 pin HDMI connectors complete.. 326 Supplying and installingcat-6 cable suitable for networking as per specification no. WG-COC/NC 327 Supplying, fixing, and configuring 24 ports, POE switch in provided rack as perspecification No. WG-NWC/ENS(1-11-3) 328 Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS/UTPC. 329 Supplying and fixing POE adaptor to provide DC supply to ethernet devices as per specification No. WG-NAS/PEA 330 Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS/RAK 331 Supplying, erecting, testing and commissioning of single phase input & 1 phase output 1 kVA capacity online pure sine wave UPS, with backup time of 1 hrs. PWM & IGBT based,with 0.8 to unity output pf complete with all protections as per specification no. AP-UPS 332 Supplying and erecting 12V/100Ah SMF battery with battery terminal wire, duly charged with 24 months warranty complete.(3-8-12) 333 Supplying & erecting of High definition 4/5 Megapixel IP IR Dome Camerawith following featuresImage Sensor : minimum 1/2.8 Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520Video Compression : H.264, H.265 or higher, at least Three individuallyconfigurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D DigitalNoise Reduction, Automatic White Balance, Automatic Gain Control, BacklightCompensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Scene change detection, Facecapture, Video tampering, audio exception detection, Region entrance detection,Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalentBIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mountingheight not more than 5 meter) etc with all accessories etc complete as perspecification no. CCTV-CAM. 334 Supplying & erecting of High definition 4/5 Megapixel IP IR Bullet Camerawith following featuresImage Sensor : minimum 1/2.8 Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520Video Compression : H.264, H.265 or higher, at least Three individuallyconfigurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View :2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102°6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White,0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC & PoE, IP67, IK10 - Vandal Resistant. Built in micro SD/SDHC/SDXC card slot of minimum 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain,white balance. Image Enhancements : Day/Night-Auto (ICR)/Color/Black & White, 3D DigitalNoise Reduction, Automatic White Balance, Automatic Gain Control, BacklightCompensation, Highlight Compensation.Events : Privacy Masking, Motion detection, Scene change detection, Facecapture, Video tampering, audio exception detection, Region entrance detection,Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X,digest authentication, user access log, TLS1.2, AES - 256, SSH/Telnet closed,FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP,SSL/TLS, TCP/IP, Secure Real-Time Transport Protocol (SRTP), Bonjour,SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalentBIS/TECH/STQC or any indian standards as applicable, CE, FCC certified.duly erected in position on wall/ceiling/false ceiling/provided pole (mountingheight not more than 5 meter) etc with all accessories etc complete as perspecification no. CCTV-CAM 335 Supplying, installing, testing & commissioning of 64/80 Ch Network VideoRecorder (NVR), suitable connect Min. 64 IP Cameras, up to 5 MegapixelResolution, with HDMI 1/VGA 1 and HDMI 2/VGA 2 outputs provided,Atleast one HDMI output of 4K resolution, atleast one VGA output with outputup to 1920 × 1080,Support H.265 or higher, H.264, MJPEG,Supports Redundant Dual Power,Incoming Bandwidth 320 Mbps with minimum 8 SATA Hard Disks, ANRTechnology,8 SATA interfaces for 8 HDDs and capacity of each HDD up to 8TB,minimum 02 USB port, Alarm I/O 16/4, RJ-45 10/100/ 1000 Mbps selfadaptiveEthernet interface,support multi brand network Cameras,ONVIF conformance,Multiple network monitoring: Web viewer .support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS,iSCSI, UPnP™, HTTPS.RoHS, UL, CE, FCC certified.duly erected in provided U Rack with wiring connections, tagging andprogramming etc. complete as per specificationss no. CCTV-NVR 336 Supplying & erecting 8 TB internal Surveillance HDD suitable for SATA Portof NVR, interface transfer rate 6 GB/S, maximum sustained transfer rate 210MB/Sec to 213 MB/S. Drive bay supported 08+, Cameras supported up to 64,Cache (MB) 256, Load/Unload Cycle -3000000, Work Load Rating per Year180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected inposition in provided NVR as per specification no. CCTV-HDD 337 Supplying & erecting 43 professional LED display with 1920*1080 (FullHD) Display, suitable for 16/32 channel NVR and following featuresBrightness: minimum 500 Cd/m2Contrast Ratio: minimum 1000:1Viewing angle: 178/178 deg.Response time: maximum 8 msInputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle dulyerected on wall or table top with standard accessories like wall mount stand andwiring connections etc. complete as per specifications no. CCTV-MON 338 Supplying and erecting HMS PVC conduitFRLS grade 20 mm dia. with PVC accessorieson wall / ceiling as per specification No: WG-MA/CON(1-2-3) 339 Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW(1-3-5) 340 Supplying, installing, testing and commissioning of15 kWp ON-GRID Solar PV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 45 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnectingwires / cables up to solar ON GRIDinverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liaisoning charges, remote monitoring system with maintaining card/chip for 5 yearsincluding net charges for RMS System, complete up to net meter installation and export to the grid with 5 year ON-SITE warranty and fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG(4-5-4) 341 Supplying and erecting switch disconnector fuse (SDF) switch 415V up to 63A, open execution, four pole AC23 A rated with terminal shrouds on both sides and phase barriers along with telescopic shaft for depth adjustments and door interlock and padlock complying to IS/IEC 60947-3 Part-1/3HRC - DIN type fuse,insulation voltage 1000 Vfor enclosing in panel with rotary handle for ON / OFF operation (without HRC fuse)(5-1-17) 342 Supplying and erecting porcelain/epoxy bus bar support complete erected in provided M.S. box for 100A(5-10-26) 343 Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.(6-1-19) 344 Supplying and erecting static energy meter with 3 x 240V 50 Hz. AC supply 10 to 60 A, ISI mark,accuracy class 1.0 with backlit LCD display, (Measuring and display Trivector, V, I, kW, PF, Hz, Last month history of kWh andMD in kW) with special features like TOD, Tamper logging, Optical Communication Port & Display in absence of Power &with transparent hinge type box completeerectedonpolished teak woodboardduly wiredwithrequiredsizeof weather proofPVC wires duly testedby electric supply company.(6-3-3) 345 SupplyinganderectingAC three phase HT CT multifunctionnet meterDLMS compliance of accuracy class 0.5, 3x 63.5V, 50Hz,with backlitLCD display, optical port& RS 232 port( measures import kWh, kVAh, export kWh, kVAh, net kWh, kVAh, V, I, kW, 6 months history of energy, load survey, TOD, tamper detection & logging, power ON/OFF events, instantaneous parameters of rating 1/5A with display in absence of power)with wiring connections and mountinghardwareonprovidedpanelscompletewith calibration certificate from manufacturer. 346 Supplying, installtion & marking of surge arrestor/ surge protection device at the sub main distribution board after the incoming breaker of type 2 tested forImax 40 kAfor three phase and neutralwith compliance to IEC 61643-11 as per specification no. CP-SPD(6-6-6) 347 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 70sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL(7-1-33) 348 Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9-1-1) 349 Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results asper specification no. EA-EP(9-1-2) 350 Supplying and erecting aluminium strip of high purity required sizes used for earthing on wall and/or any other purpose with necessaryaluminiumclampsfixed on wall painted with bituminous paint with joints required as per specification no EA-EP.(9-2-1) 351 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clampsfixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.(9-2-3) 352 Supplying and erecting conventionalspike typeair termination suitable to carry lightning stroke made up of heavy gauge40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipeerected on provided foundation complete.(9-3-1) 353 Making cement concretefoundationin 1:3:6 cement concrete,(20 to 25) mm. stone metal duly plastered with necessary curing forcomplete. (pole muffing or any other purpose).(16-3-7) 354 Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.(1-6-1) 355 Supplying and erecting modular type switch 16Aduly erected on provided plate and box with wiring connections complete.(1-6-2) 356 Supplying and erecting modular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete.(1-6-11) 357 Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.(1-6-29) 358 Supplying and erecting bulk head LED fittingmax. 10Wwith high transitivity diffuser withsystem lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg.,THD<10%,p.f. >0.95, operating range of140-260V, in built surge protection of 2.5 kV, Life class of50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.(2-1-15) 359 Supplying, erectingandmarking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB(5-3-7) 360 Supplying, erectingandmarking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kAin provided distribution board as per specification no. SW-SWR/MCB(5-3-13) 361 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 362 Supplying, fixing, and commissioning 2 pole, RCBO 6/10/16/20/25A,with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO(5-6-9) 363 Supplying, fixing, and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indicationas per specification no SW-RCCB/RCBO(5-6-13) 364 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 4 sq mm copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-9) 365 Supplying, erecting & terminating FRLS XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU(7-2-33) 366 Supplying, installing & testing maintenance free earthing comprising of Electrode of 17.2 mm diameterLow Carbon Steel with 250 micronmolecular copper bonded earthing rod ofLength 3malong with 25 kg Carbonbased environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI(9-1-5) 367 Supplying and erecting annealed bare copper wireof high purity of required sizesused forearthing onwall with necessarycopperclampsfixedon wall/cable/conduitwithscrews complete.(9-2-4) 368 SITC of Electric Traction Passenger Lift with · Rated capacity :- 8 Passenger/544Kg· Floors :- B+G+8 floor (10 Stops/10 Landings)· Travel :- 21 to 32 mtrs· Location of Lift Machine:- MR/MRL· Rated speed :- 1.5mps VS· Car/Landing door clear opening of 800 mm wide x 2000 mmhigh· Clear Car size of 1300 mm wide x 1100 mm deep x 2250mm high· Lift shaft available having clear size of .1900 mm wide x 1900 mmdeep, 1500 mm Pit depth, 4250 mm Overhead.· Doors type :- COPO/TOPO Doors with frame made from SS 304 gradesolid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landingdoors with SS door architraves/frames The lift doors shall have minimum 1hour fire rating (with submission of necessary valid test certificate issuedby NABL accredited or Independent test laboratory).· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of1.5mm, thick with hairline finish with frame made from MS girders, bracing ofadequate size with minimum safety factor of 5, with Toe Guard Apron, withnecessary false ceiling with adequate LED lights, blower/fan for ventilation & SSchequered plate flooring, handrails, mirror, emergency light etc. The lift carinterior design shall be done as per the directions of engineer in charge. (CSR Item no.17.1.13) 369 SITC of Electric Traction Passenger cum Stretcher/Hospital Liftwith · Rated capacity :- 15 Passenger/1020Kg· Floors :- B+G+8 floor (10 Stops/10 Landings)· Travel :- 21 to 32 mtrs· Location of Lift Machine:- MR/MRL [applicable for PassengerLift with MRL only & Stretcher/Hospital Lift with MR & MRL]· Rated speed :- 1.5mps VS· Car/Landing door clear opening of 800/900/1000 mm wide x2000mm high· Clear Car size of 1000 mm wide x 2400 mm deep x 2250mm high· Lift shaft available having clear size of 1800 mm wide x 3000 mmdeep,1500 mm Pit depth, 4250 mm Overhead· Doors type :- COPO/TOPO Doors with frame made from SS 304 gradesolid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landingdoors with SS door architraves/frames The lift doors shall have minimum 1hour fire rating (with submission of necessary valid test certificate issuedby NABL accredited or Independent test laboratory).· Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of1.5mm, thick with hairline finish with frame made from MS girders, bracing ofadequate size with minimum safety factor of 5, with Toe Guard Apron, withnecessary false ceiling with adequate LED lights, blower/fan for ventilation & SSchequered plate flooring, handrails, mirror, emergency light etc. The lift carinterior design shall be done as per the directions of engineer in charge. (CSR Item no.17.1.17) 370 For Lift having 800mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOPs with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travellingcables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. 371 For Lift having 1000mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade solid(non-cladded) landing door [Two panel], this includes all necessary accessories like LOPs with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travellingcables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete. 372 Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification No: WG-MA/CC(1-1-9) 373 Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 374 Supplying and erecting green colour earthing with 1x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW(1-3-2) 375 Supplying, installing, testing & commissioning split type variable speed invertertechnology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.0TR to 1.2TRcapacity having ISEER minimum 5.00suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ WAC 376 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete. 377 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigeranthaving 22SWG thickness and inner dia/size 16mm complete. 378 Supplying, erecting, testing and commissioning of 10HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. 379 Supplying, erecting, testing and commissioning of 12HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000m operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. 380 Supplying, erecting, testing and commissioning of 14HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable green equivalent refrigerant, for minimum cooling capacity as delivering 100% capacity at 47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air discharge suitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technology microprocessor based control compressor starter/control panel with scroll compressor, air cooled copper condenser coil of suitable shape for increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, copper tube aluminium fin air cooled condenser, condenser fan with motor suitable for 415V±10%, 50 Hz, 3 phase power supply (all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housed in powder coated weather proof cabinet complete. 381 Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 0.6TR - 0.8TR ( 229 to 358 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. 382 Supply, installation, testing and commissioning of VRF/VRV based Hi-wall type indoor unit (IDU) of nominal cooling capacity 1.3TR (421 cfm) to 1.7TR (586 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, expansion device, cordless remote control with necessary controls, with 3-core copper flexible cord of required length and electrical terminal to receive power supply, etc. IDU shall have anticorrosive coating suitable for coastal area. Unit shall be suitable for indoor wall mounting, having an electronic control console, provided with suitable mounting brackets with any additional refrigerant and oil charge as per the requirement during installation, connected to the system complete. 383 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 2.0TR (618 cfm) to 2.3TR (671 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. 384 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR ( 1100 cfm ) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. 385 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 4 Way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 3.0TR (1100 cfm) to 3.2TR (1165 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. 386 Supplying and erecting circular flexible/rigid PVC pipe duct of size 100mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves / dampers, filters at position complete. 387 Supplying and erecting circular flexible/rigid PVC pipe duct of size 150mm dia, 4mm thickness with required couplers, reducers, T-joints, Y-joints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete. 388 Supplying, erecting, testing and commissioning centralised programmable remote control panel (HMI) touch manager controls minimum 16 system of 64 ODUs can be controlled and up to 992 IDUs can be individually mounted and controlled indoor units having colour min 200mm size LCD touch panel, yearly schedule, power proportional distribution function, temperature limitation, history function complete erected on wall integrated with provided fire alarm system. 389 Supplying and installation of high pressure grade required size copper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways, Nitrile rubber insulation, painting etc. with brazing and testing for leakages confirming the normal operation of the VRV/VRF air conditioning system. 390 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 28.6mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultra violet radiations with OEM standards of VRV/VRF air conditioning system complete. 391 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 22.2mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiation with OEM standards of VRV/VRF air conditioning system complete. 392 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 19.1mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19 mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. 393 Supplying, laying / fixing, testing and commissioning of ofappropriate nominal refrigerant copper pipe of 15.9 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.(3-11-94) 394 Supplying, laying / fixing, testing and commissioning of ofappropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.(3-11-95) 395 Supplying, laying / fixing, testing and commissioning of ofappropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete.(3-11-96) 396 supplying, laying/fixing, testing and commissioning ofappropriate nominal refrigerant copper pipe of 6.4mm dia (OD) for liquid line/suction line supply and return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance and ultraviolet radiations with OEM standards of VRV/VRF air conditioning system complete. 397 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 5000 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 398 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 3000 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 399 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 2500 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 400 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline/cabint exhaust air fan inlet unit having 1000 cfm capacity with maintaining the static pressure minimum 65mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete.With fabrication and iron work. 401 Supplying & erecting tile type modular diffuser made from aluminium sheet with powder coated matching to the ceiling shade for provided supply and return air complete. 402 Supplying and erectingelastomeric nitrile rubber / foam tube type sleeves forcoating and insulating on provided PVC / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater/AC system. 403 Supplying and erecting 25/32 mm (ID/OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 mm conforming to IS 15778 (CTS Series)with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP/CPVC 404 Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame.(5-4-13) 405 Supplying, fixing, and commissioning 2 pole, RCBO 6/10/16/20/25A,with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indication as per specification no SW-RCCB/RCBO(5-6-9) 406 Supplying, fixing and commissioning 4 pole RCBO 32/40A, with overcurrent, rated short-circuit breaking capacity (10 kA) and earth leakage protection,with 30/100/300 mA sensitivity and short circuit and earth leakage trip indicationas per specification no SW-RCCB/RCBO 407 Supplying and erecting GI sheet 0.6 mm (24 SWG) having zinc coating of 120 microns withgalvanization process compliance to IS 2629:1985 tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint.(6-1-2) 408 Supplying and erecting GI sheet 0.8 mm (22 SWG) having zinc coating of 120 microns withgalvanization process compliance to IS 2629:1985 tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint.(6-1-3) 409 Supplying and erectingGI sheet 1.25 mm (18 SWG)having zinc coating of 350 microns withgalvanization process compliance to IS 2629:1985 tobeused for fabricationofboxespanelboardsetc. including cutting, bending, drilling, welding, riveting etc. and paintingwithone coat of red leadpaint and 2 coats of enamel paint. 410 Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority.(6-1-19) 411 Supplying, erecting& terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core6 sq. mm. copperconductor completeerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU 412 Supplying, erecting& terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10 sq. mm. copperconductorcompleteerected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipeas per specification no. CB-LT/CU

BRR : 8419105 Tender For Dhule Industrial Area Interior Work Of Newly Constructed Office Building With Internal Electrification. - Providing and fixing in position Gypsum board false ceiling with 12.5mm thick Gypsum boards,screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. 2 Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7 Kilograms/M2 with a minimum pull out strength of 100 Kilograms. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. 3 Providing and supplying Armstrong ‘Optra Acoustical Wall Panelling’ with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and fire-resistant fabric with an option of colours as per the choice of the Architect/ Person in-charge of size 2100x600 or 600x600 mm providing a minimum sound absorption level of 0.90 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer. (Rates excluding GST) 4 Providing and fixing Wooden rafter or ceiling at all height including providing and fixing of aluminium frame work and rafter made up of ply using 9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge (Laminate Finish) (Rates excluding GST) 5 Providing and fixing Carpet Tile of CCIL make, shade and pattern and of the following specification: Loop pile carpet tile,of size 500 mm x 500 mm with Tufted… (Rates excluding GST) 6 Providing and Fixing in position Aluminium Frame work for Partitions, paneling, boxing, soffits with vertical members at not more than 600 mm centers & horizontal members not more than 600 mm centers.with L patti joint , Complete including necessary aditional supports, bracing runner etc. complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) Size 50 X 50 X 1.62 mm 7 Size 50 X 25 X 1.62 mm 8 Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. (Rates excluding GST) 6 mm thk Marine plywood 9 9 mm thk Marine plywood 10 12 mm thk Marine plywood 11 19 mm thk Marine plywood 12 9 mm thk Decorative MDF panelling 13 Providing and fixing 3mm - 4mm thick group matching Decorative Veneer of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .The item includes finishing the surface with 3 or more coats of melamine polish as per the direction by Architect. (Rates excluding GST) 14 Providing and fixing 1.5 MM thick group matching Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .(Basic Rate for laminate: Rs.55 per sft.) (Rates excluding GST) 15 Providing & fixing Trap Doors made out of required framework, 19mm thk plywood finished with material 1.5 mm thk laminate from outside and 1mm thk laminate from inside. Site modification as per requirement has to be undertaken without any extra cost. (Rates excluding GST) 16 35mm thk Flush Door both side Laminate - Providing & fixing 35mm thk. Phenol bonded Flush door or Partly Glazed finish with 1.5mm thk. Laminate on both sides as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required. (Rates excluding GST) 17 Storages Providing & fixing in position 460 mm deep storage / Wardrobe unit along with partitions etc with 1) sides, top, bottom shelves made out of 19mm marine plywood for all inside surfaces 2)6 mm thk. marine ply backing panels 3) Shutters made out of 19 mm thick block board finish with material & 6mm thk teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces& be finished with melamine polish.4) Finish 1mm thk laminate inside & 1.5mm thk laminate out side, hardwares such as heavy duty hinges, brass body locks (Ebco make) with extra large group key of approved quality, magnetic ball catchers, handles, towerbolt etc. All exposed woodwork to be finished with 3 coats of melamine polish & all internal surface finished with 1 mm thk laminate. The exposed surfaces shall be finished with 1.5 mm thk. laminate of approved shade & colour. All as per detailed drgs and instructions of EIC / Architect (Rates excluding GST) 18 Assistant Table (size 1500 x Number 900 x 750 mm) side table (size 1100 x 450 x 700 mm) in Laminate... Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides & bottom in 6 mm thk. Plywood Internal surfaces to be Laminate. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC / Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top & shall be finished with matching Laminate. (Rates excluding GST 19 Reception Table (2000 X 600 X Number 975)... Providing and fixing in position Reception Table of approved shape made out of 19 mm thick marine grade plywood fixed on intermediate 19mm thick marine grade plywood verticals at certain interval (as shown in the drawings) with necessary wooden members & S.S.studs with glass top finished with approved Laminate finish on all exposed surfaces. .Also including cost of all necessary wooden beading / mouldings finished with melamine polish. Rate should be including cost of hardware of approved make. complete as per detail drawing, as specified and as directed by Architect. For Reception Counter - Two pedestal with 4 nos of drawer & one keyboard tray is required. (Rates excluding GST) 20 Conference Table (size 8600 x 2000 x 750 mm)... Providing & fixing in position Meeting Room Table of approved shape shown in drawing. Table top made out of 19*19mm & 50*38mm TW frame work with both side 6mm thk marine plywood in two layers finished with approved veneer. Apron made out of 50*50 mm TW frame work with both side 9 mm thk marine plywood finished with approved veneer. Edge of Table finished with 50*50 mm TW moulding with melamine polish. Footrest & skirting made out of 19 mm thk marine plywood finished with approved veneer. Edge of footrest finished with 25 mm thk wooden half round moulding with melamine polish. 50*50 mm wooden connecting members. (Size as per enclosed drawing) Rate including cost of wooden beadings, mouldings, inlays, etc. Top should be finished with approved veneer. Sides finished with approved veneer & melamine polish complete as per detail drawing, as specified & as directed by Architect. (Rates excluding GST) 21 Dining Table Size 900 x 900 x 750 mm ht... Providing & arranging in position Dining tables made out of Laminate top and stand with proper joinery & hardware as per drawing. the top finished with bevelled edges. Item to be completed in all respect as per drawing & instructions from Engineer-incharge (Rates excluding GST) 22 CENTER-TABLE... CENTER -TABLE - Providing & arranging in position centre tables made out of TW members 40X 75 mm with proper joinert & hardware as per drawing. The top finished with 12mm thk tinted glass with bevelled edges. Item to be completed in all respect as per drawing & instruction from E.I.C. of given size & shape (Rates excluding GST) 23 CORNER-TABLE... Square/circular corner Table - Providing & arranging in position centre tables made out of TW members 40X 75 mm with proper joint & hardware as per drawing. The top finished with 12mm thk tinted glass with bevelled edges. Item tobe completed in all respect as per drawing & instruction from E.I.C. of given size & shape (Rates excluding GST) 24 Modular workstations consist of low ht. partition screen, work tops, Pedastal unit ,filing stoarges( only in few cases), key board tray & CPU trolley as specification mentioned below.The profiles of the Aluminium partition frame should be as per the attached sheet and the as per the weight per Rmt mentioned on the sheet.. Work top - 25 mm hk. Pre laminated particle board cut to size & shape as per design & drawings. Edges to be fixed with 2mm thk PVC edge binding of approved make & matching to laminate. Key board tray & CPU Trolley - Each work station shall have PVC moulded key board tray & M. S. powder coated CPU Trolley with castors. Pedastal unit - 3 drawer pedastal unit of overall size 450 deep X 450 wide X 725 ht made out of 18 / 16 mm prelaminated board for caracus & 12 mm prelaminated board for drawers. Top drawer to be on roller slides and two lower drawers to be of 3 extension ball bearing slides. Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,each workstation with one tackable board and white board. Screen in front of the table to have frosted glass panel above table top. (Rates excluding GST) 25 EXECUTIVE cabin table (size 2750 x 1200 x 750 mm) side table (size 1500 x 600 x 700 mm) in Veener.. Providing & arranging in position desk units in 19mm thk. Marine plywood including side unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides & bottom in 6 mm thk. Plywood Internal surfaces to be veneer with melamine polish. Table tops, drawer unit fronts & sides to be finished as per drawings. The front modesty panel etc shall be finished as per drawings & instructions of the EIC / Consultant all complete. All trays in writing desks, side units to have concealed stoppers. All pencil trays shall have small compartments for keeping miscellaneous stationaries. All beadings, mouldings & exposed woodwork to be in teak wood. Foot rest shall be made out of 19 mm plywood frame work with 6 mm top & shall be finished with matching veneer all molding shall be finish in 3 coats of melamine polish. All the tables shall have keyboard drawers to accommodate keyboards & mouse wherever necessary as per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock etc. drawings & also shall include CPU unit as shown in the drawings approved by Engineer-in-charge/Architect. No seperate payment shall be made for this. Tables all exposed surface finished with a approved veneer in approved pattern as per drawings. All exposed surface of side unit to be finished with an approved veneer. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved veneer from outside & French polish from inside. Item to be completed in all respects as per drawing & instructions from EIC. The item shall include a set of drawer & openable shutters, as per the drawing & details. All shelves, openable shutters, drawer box, drawer front etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shall be in 6 mm thk. Plywood. All exposed surfaces to be finished With veneer of approved shade & make. All complete 26 Staff Chair..Providing and placing in requireed position Godrej make Bravo Visitor Back 9U12RX 1 or equivalnet approved make the seat and back are made up of 1.2 cm. thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm. (W) x 58.0cm. (H) SEAT SIZE:47.0 cm. (W) x 48.0 cm. (D with the Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in 30% Glass Filled black Nylon.complete as per manufacture specifications and as per instruction of Engineer in charge. (Rates excluding GST) 27 Providing and placing in requireed position Godrej make Kareena Visitor Back or equivalnet approved make the seat and back are made up of 1.2 cm. thick hot pressed plywood, upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. BACK SIZE: 47.5 cm. (W) x 58.0cm. (H) SEAT SIZE:47.0 cm. (W) x 48.0 cm. (D with the Polyurethane foam is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2 on Hampden machine at 25% compression. TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in 30% Glass Filled black Nylon. complete as per manufacture specifications and as per instruction of Engineer in charge (Rates excluding GST) 28 Providing and placing in requireed position Godrej or equivalent make Halo Mid Back Chair Model PCh- 9200R or approved equiivalant chair of size size 50.0cm W X 49.5cm (H) with 75.o cm (D) including necessary approved type and colour fabric complete as per manufacture specifications and as per instruction of Engineer in charge. (Rates excluding GST) 29 Providing & Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery 30 Providing & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest , Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery 31 Providing & supplying multi seater sofas with teakwood internal frame out of size min. 70x40mm as mentioned in drawing with necessary spring/ rubberised coir/ 32 density polyurethene foam/100% latex rubber foam of appropriate quality & thickness as shown in the drawing with melamine polish on all exposed wooden surface. 75mm thk. for seat & 50mm thk for back. 25mm polyurethene in it to give required shape. The rate to include upholstry material of approved velvet (fabric) on outer side & on the inner side white cloth of approved qulaity shade etc. The contractor shall use appropriate size of frame work instead of mentioned to achieve desired shape & comfort as shown. All as per instructions of Engineer-incharge. (Rates excluding GST) a) Single Seater Sofa 32 b) Three Seater Sofa 33 c) Two Seater Sofa 34 palmet / Jamblining (upto 250mm wide).. Providing & fixing in position jamb lining of 19mm thk. plywood & finished as below with wooden moulding, exposed surfaces polished with 3 coats of melamine polish. All complete as per drawing & instructions of Engineer-incharge (Rates excluding GST) 35 Providing and fixing in position 12mm thick Soft Board paneling on partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per detail drawing, as specified and as directed by Architect/Enginner In Charge.. (Rates excluding GST) 36 Dust Bin (300mm Dia).. Providing & arranging in position dust bins out of perforated (min Size 350 mm dia x 400 mm Height). Item to completed in all respect as per drg & directions. (Rates excluding GST) 37 Roller Blinds..Providing and fixing Collinear Window Sahdings from Livin in 3/2 vane size having headrail and bottom rail made of aluminium alloy extruded profile, powder coated and provided in standard natural white color. The rolling tube should made up of aluminium alloy from extruded profile of Ø34 mm. The headrail dimensions should be in the range of: H 58mm x 72mm for the larger headrail. The cassette should conseal the working mechanisme rotary-- clutch that raises, lowers and tilts the shade contains and protects shading fabric when fully raised. All plastic parts are in white color. Operation options: endless cord loop. Installation to be done by quick release brackets (wall or ceiling). The fabric of this Silhouette Window Shadings should be anti static polyester vanes which have facings between 2 sheers layers (50mm wide) to reduce glare. Sheer layers made of white 100% knit polyester & the selection of colors, textures and opacities from the Livin collection as specified by the architect. The shading to be opearted by Esayrise mechanism with a continous cord loop operating option. The FABRIC shall be constructed from spun - bonded 100% polyester fibre, having Greenguard certified and recommended for sensitive areas like clean room condition and laboratories.all complete as per instructions of Engineer - in - charge. (Rates excluding GST) 38 Providing, fixing, applying by Company Trained Technicians, premium Wall Covering (Wall Fabric / Paper), as per details in attached specifications, or as per detailed specifications and colours attached, or approved equivalent, of approved colour, texture and design, including base and sub-base preparation (on top of existing P.O.P surface), all complete, in a neat and workman like manner, as per directions of Engineer-In-Charge. (Rates excluding GST) 39 Providing & fixing Artificate like Artifical Plant, Picture Artificial plants 40 Picture frame 41 providing and fixing approved Black Out Curtain to be fixed & commissioned as per manufacturers specification the work to be completed as per satisfaction and approved of EIC (Rates excluding GST) 42 Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. 43 Providing and fixing in position 12 mm thick Toughened Fully Clear Glass Door by using various glass patch fittings to be fixed with necessary fittings on the ceiling duly finished without giving any load on the false ceiling by using necessary hardware what ever necessary and required numbers to complete the job in all respect. Rate including cost of door with approval hardware such as patch fitting lock, handle, Floor Spring of approved make. Contractor is advised to submit working drawing with details patch fitting, sizes of glass panels etc and take approvals of consultants before execution of works. complete as per detail drawing, as specified and as directed by Architect. (Rates excluding GST) 44 Providing & fixing glazed partition made out of 8 mm thk clear glass with designs pattern as shown in drawing. Glass should fixed with required size of wooden beading which finished with 3 coats of melamine polish. Rate including cost of glass edge machine polishing in between 2 glass edges touching together (if required) complete all as per the drawing, details & specification & to the satisfaction of Engineer-in-charge. (Rates excluding GST) 45 Providing and applying plaster / wall punning with plaster of paris ( with plaster of paris material) in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. 46 Forssted 3m film.. Providing & fixing in position approved make colour & shade frost film on glass complete as per direction of manufacturer & instruction of Engineer - in - Charge. (Rates excluding GST) 47 Providing and fixing Indian teak wood joists and girders in timber floors of single, double or framed type including scaffolding if necessary, and one coat of primer etc. complete. 48 Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). 49 Concealing of Conduits (WG-MA/CC) Supplying & erecting HMS PVC conduit 20mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. 50 Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. 51 Supplying & erecting HMS PVC conduit 32mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. 52 Point Wiring (WG-PW) Point wiring for light/bell concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW 53 Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification no. WG-PW/CW 54 Point wiring for independent plug in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E ) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification no. WG-PW/SW 55 Wiring for plug on board with switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification no. WG-PW/CW 56 Modular switches and Accessories Supplying and erecting modular type switch 16/20 A with indicator on provided plate and box with wiring connections complete. 57 Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutter on provided plate and box with wiring connections complete. 58 Supplying and erecting modular type T.V. socket single outlet on provided plate and box with wiring connections complete. 59 Supplying and erecting modular type telephone socket two gang with safety shutter on provided plate and box with wiring connections complete. 60 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 61 Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 62 MAINS CIRCUIT WIRING- Providing and laying of following PVC Supplying and erecting PVC insulated PVC round sheathed FR 1 sq.mm (32 no. x 0.20mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV 63 Supplying and erecting PVC insulated PVC round sheathed FR 1.5 sq.mm (30 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV 64 Supplying and erecting PVC insulated PVC round sheathed FR 2.5 sq.mm (50 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV 65 Supplying and erecting PVC insulated PVC round sheathed FR 4 sq.mm (56 no. x 0.30mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV 66 Indoor LED Fittings (FG-IDF/LED) Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. 67 Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. 68 Supplying and erecting LED Panel Light (600mm X 600mm) Max. 30 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. 69 Supplying and erecting anodized aluminium light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block/wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. 70 Decorative Outdoor Fittings (FG-ODF) Supplying and erecting Gate / garden light fitting with 300mm dia. glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FG-ODF/GLT. 71 Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL. 72 Accessories for Indoor Fittings (FG-AS) Supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicator lamp working on 230V A.C. supply with resetting arrangement complete erected on double wooden / sunmica board. 73 Supplying and erecting electronic type cordless call bell erected on T.W. board having portable bell push working on 9V D.C. battery and (effective range upto 45 meter) bell on 250 V A.C. supply. 74 Accessories for Outdoor Fittings (FG-BKT) Supplying and erecting Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6 m in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC. 75 Cable Tray (CB-CT) Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. 76 Providing & erecting hot dipped galvanised perforated type cable tray manufactured from 16 SWG GI sheet of 300 mm width & 75 mm height complete with necessary coupler plates & hardware. 77 LT Cables (Copper) (CB-LT/CU) Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 3 core 2.5 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 78 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 79 Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU 80 Energy Devices (APFC Panel) (CP-ED/APFC) Supplying, erecting, testing & commisioning 100 kVAr, 440 V, 3 phase, 50 Hz., APFC Panel with contactor logic with intelligent microprocessor relay, consisting of 2,3,5,10,20.20,20,20 or suitable steps of APP/MPP type capacitor units with detuned (harmonic filter) reactors of suitable rating, APFC panel shall be compliance to IEC 61439 and power quality IEC 61921 standard as per specification no. CP-ED/APFC. 81 LT - MCBs/ MCB Change Over Switch (SW-MCB) Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 82 Supplying, erecting & marking SP MCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 83 Supplying, erecting & marking DP MCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 84 Supplying, erecting & marking TP MCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 85 Supplying, erecting & marking FP MCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-MCB 86 Supplying, erecting and marking 4 pole isolator only switch version of miniature circuit breakers of 40A in provided distribution board. 87 LT - MCBDBs (SW-MCBDB) Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 4 ways/12 Poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (vertical busbar type) as per specification no. SW-MCBDB. 88 Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 8 ways/24 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (vertical busbar type) as per specification no. SW-MCBDB. 89 Supplying & erecting triple pole and neutral distribution board (TPNDB), SP/TP MCBs total 12 ways/36 poles, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (vertical busbar type) as per specification no. SW-MCBDB 90 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB 91 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 4 ways (4 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection on provided iron/GI frame as per specification no. SW-MCBDB 92 Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as per specification no. SW-MCBDB 93 Fans (FG-FN) Providing and erecting air circulator 600 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation. 94 Supplying and erecting exhaust fan heavy duty 230 V, A.C. 50 cycles 375/380 mm. 900 RPM complete erected in position as per specification no. FG-FN/EXF 95 Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF 96 Air Conditioners (AP-AC) Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 2.1TR to 2.3TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC 97 Water Coolers & Refrigerators (AP-WC) Supplying, erecting, testing and commissioning self contained water cooler 230/250 V 50 cycles nominal cooling capacity of 80 litres per hour and storage capacity 120 litres with partially stainless steel body as per specification no. AP-WCR/WC 98 Water Purifiers (AP-WPF) 99 Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply with UV fail & filter change indication system .(for TDS more than 200) Rooftop ON grid solar systems (ESD-RT-ONG) 100 Supplying, installing, testing and commissioning of 25 kWp ON-GRID Solar pV System / Plant consisting Solar PV Poly Crystalline Panel (335 Wp X 75 Nos.) and Solar ON-GRID Inverter of similar capacity (THD<3%) with interconnecting wires / cables up to solar ON GRID inverter, proper base plate, canopy box to house Inverter and necessary accessories i.e. ACDB/ DCDB , MCB etc. wiring up to solar Inverter in casing and capping, display board, sign board, two distinct earthing, lightning arrester, liasoning charges, remote monitoring system with maintaining card / chip for 5 years including net charges for RMS System, complete upto net meter installation and export to the grid with 5 year ON-SITE warranty and 5 Years fully comprehensive maintenance contract as per Specification no. ESD-RT-ONG. 101 Concealing of Conduits (WG-MA/CC) Supplying & erecting HMS PVC conduit 25mm dia. with necessary accessories in wall/floor with chiselling appropriately as per specification no. WG-MA/CC. 102 Supplying & laying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. 103 Telephone, Audio and Video Wiring (WG-TW/TW) 104 Supplying, erecting & terminating 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW 105 Supplying, erecting & terminating 20 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, nylon rip cord & grey colour sheathed with FR PVC, confirming to ITD specification S/WS 113C laid in provided PVC casing-n-capping/conduit as per specification no. WG-TW 106 Telephone Accessories (WG-TW/TA) Supplying, erecting & commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TA 107 Supplying, erecting & commissioning 50 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TA 108 Supplying, installing, testing & commissioning digital (hybrid) type EPABX of 6 x 32 universal extensions suitable upto 96 extensions compliant to IEC 61000, EN 60950, CISPR 22, IS:9000 part 2/section 4 having LAN/WAN port, USB port, RS232 port as per specification complete as per specification no. WG-TA 109 Supplying, installing, testing & commissioning push button telephone instrument desk top/wall mount with caller ID & speaker unit as per specification complete. 110 Supplying, installing, testing & commissioning IP telephone instrument as per specification complete. 111 Modular switches and Accessories Supplying and erecting modular type telephone socket one gang with safety shutter on provided plate and box with wiring connections complete. 112 Supplying and erecting modular type telephone socket two gang with safety shutter on provided plate and box with wiring connections complete. Supplying and erecting modular type computer Jack RJ 45 with safety shutter, on provided plate and box with wiring connections complete. 113 Supplying and erecting modular type blanking plate two module, on provided plate & box. 114 Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 module complete. 115 Cable Tray (CB-CT) 116 Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG GI sheet of 300 mm width & 100 mm height with required standard accessories. 117 ELV Cabling (WG-ELVC) Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 cable with rodent proof and anti termite jacket suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/ casing-n capping as per specification no. WG-ELVC/NC 118 Supplying and installing FR PVC sheathed HDPE insulated copper cat-6 armoured cable suitable for networking compliant with ANSI/TIA-568.2-D standards as per specification no. WG-ELVC/NC 119 Supplying and erecting 24 fibers LSZH armoured multimode optical fiber cable with , core dia 50/125 µm (OM3), suitable upto 10 GBPS, compliant to IEC 60793/IEC 60794 standards, on wall/ ceiling or laid in provided pipe/trench as per specification no. WG-ELVC/OFC 120 Supplying and fixing 3 m 24 AWG multi stranded UTP patch cord with RJ-45 factory crimped connector of cat 6 type compliant ANSI/TIA-568.2-D standards in position as per specification no.WG-ELVC/PC 121 Supplying and installing LSZH sheathed HDPE insulated copper cat-6A cable suitable for networking compliant with ANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC Networking Accessories (WG-NAS) 122 Supplying, installing and testing UTP connector (RJ-45) as per specification no. WG-NAS/UTPC. 123 Supplying and fixing Cat 6, 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 & ISO/IEC 11810 complete as per specification no. WG-NAS/PP 124 Supplying and fixing 24 ports light guide unloaded interconnect unit, rack mounted type, with adapter panel for termination of optical fiber cables in provided U rack complete as per specification no. WG-NAS/ LIU 125 Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 500x550x347 mm) as per specification no. WG-NAS/RAK 126 Networking Components (WG- NWC) 127 Supplying, fixing, and configuring 8-ports managed gigabit, layer-2 switch, 10/100/1000 base-T, PoE smart switch plus 2 SFP erected in provided rack compliant with IEEE 802.3 standards complete. 128 Supplying, fixing, and configuring 24 ports, PoE switch compliant with IEEE 802.3 standards with min. 193W PoE capacity with 4GE SFP uplink in provided rack as per specification no. WG-NWC/ENS 129 Supplying, fixing, and configuring broadband router with all accessories on provided rack 130 Supply, Installation, Testing & Commissioning of 2MP, IP Camera, 1/2.8 type CMOS image sensor, fixed lens 2.8 / 3.6 mm, H.265 / H.264 & MJPEG triple-stream encoding, 25/30fps@1080P (1920 ×1080), Max IR LEDs length 30 m, IP66 rated, Fixed Dome Camera. CCTV camera - IP - Dome - Cpplus / Hikvision make 20mtr - 2.8 / 3.6mm lens 131 Supply, Installation, Testing & Commissioning of 2MP, IP Camera, 1/2.8 type CMOS image sensor, fixed lens 3.6 mm / 4 mm, H.265 / H.264 & MJPEG triple-stream encoding, Max. IR LEDs length 30 m , IP66 rated, 25/30fps@1080P (1920 ×1080), Support ICR for day time and night time operation, Fixed Lens Bullet Camera. CCTV camera - IP - Bullet - Cpplus / Hikvision make 30mtr - 2.8 / 3.6mm lens 132 Supply, installation, testing and commissioning of UL Listed Network Video Recording System (in multiple of 32 channels) should be capable of recording 32 cameras at D1 resolution @ 25 FPS for 100% recording for 30 days. Required HDD for the same to be considered. CCTV NVR 32 channel - Cpplus / Hikvision make + 8TB HDD - Toshiba / WD make Supply , Laying , Testing & Commissioning of 42” LED Display with necessary connectors , inter linking cords etc. complete as required. 133 Supply, Installation, Testing & Commissioning of Cat-6 patchcord-1Meter long. Supply, Installation, Testing & Commissioning of Jack panel 24 port fully loaded. 134 IO Box + Plate + RJ45 jack. 135 PVC box 5*5

BRR : 8523125 Tender For Regarding Supply Of Various Type Of Material /Goods At Grampanchayat Sakhali Bk. Taluka Buldhana District Buldhana , Pvc Cement Solvent / Pvc Solution For Pipe Line Work 1 Ltr , Swing Check Type Reflux (Non-Return) Valves For Water Works Purposes , Pvc Pipe 4Kg 75 Mm , Pvc Pipe 4Kg 90 Mm , Pvc Pipe 4Kg 120 Mm , Pvc Pipe 6Kg 75 Mm , Pvc Pipe 6Kg 90 Mm , Pvc Pipe 6Kg 120 Mm , Elbow For Pipe 4Kg 75 Mm , Elbow For Pipe 4Kg 90 Mm , Elbow For Pipe 4Kg 120 Mm , Coupling For Pipe 4Kg 75 Mm , Coupling For Pipe 4Kg 90 Mm , Coupling For Pipe 4Kg 120 Mm , T For Pipe 4Kg 75 Mm , T For Pipe 4Kg 90 Mm , T For Pipe 4Kg 120 Mm , Elbow For Pipe 6Kg 75 Mm , Elbow For Pipe 6Kg 90 Mm , Elbow For Pipe 6Kg 120 Mm , Coupling For Pipe 6Kg 75 Mm , Coupling For Pipe 6Kg 90 Mm , Coupling For Pipe 6Kg 120 Mm , T For Pipe 6Kg 75 Mm , T For Pipe 6Kg 90 Mm , T For Pipe 6Kg 120 Mm , Ferrule Cock 15 Mm (Brass) , Water Meter Single Jet Isi Mark 15 Mm Class B , Water Meter Double Jet Isi Mark 15 Mm Class B , Swiss Valve For 2.5 Pipe Line , Swiss Valve For 3 Pipe Line , Swiss Valve For 4 Pipe Line , Swiss Valve For 6 Pipe Line , Pvc Pipe Cid Joint For 2.5 Pipe Line , Pvc Pipe Cid Joint For 3 Pipe Line , Pvc Pipe Cid Joint For 4 Pipe Line , Pvc Pipe Cid Joint For 6 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 2.5 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 3 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 4 Pipe Line , Pvc Pipe Cid Joint Rubber Ring For 6 Pipe Line , Resilient Seated Cast Iron Single Air Relief Valves For Water Works Purposes , Resilient Seated Cast Iron Double Air Relief Valves For Water Works Purposes , Pvc Cement Solvent / Pvc Solution For Pipe Line Work 5 Ltr , U-Pvc Pipe 40 Mm , Elbow For U-Pvc Pipe 40 Mm , Coupling For U-Pvc Pipe 40 Mm , T For U- Pvc Pipe 4Kg 40 Mm , Stainless Steel Long Body Bib Cock Tap With Flange 40 Mm , O-Ring For U-Pvc Pipe 40 Mm Plane , Water Tank 4 Layer Food Grade 100 Ltr , Water Tank 4 Layer Food Grade 200 Ltr , Water Tank 4 Layer Food Grade 250 Ltr , Water Tank 4 Layer Food Grade 500 Ltr , Water Tank 4 Layer Food Grade 1000 Ltr , Water Tank 4 Layer Food Grade 1500 Ltr , Water Tank 4 Layer Food Grade 2000 Ltr , Water Tank 4 Layer Food Grade 2500 Ltr , Water Tank 4 Layer Food Grade 3000 Ltr , Water Tank 4 Layer Food Grade 5000 Ltr , Submersible Motor Pump 1 Hp , Submersible Motor Pump 2 Hp , Submersible Motor Pump 3 Hp , Submersible Motor Pump 3Hp Three Phase , Submersible Motor Pump 7.5Hp 5 Stage Three Phase , Submersible Motor Pump 7.5Hp 8 Stage Three Phase , Submersible Motor Pump 7.5Hp 10 Stage Three Phase , Submersible Motor Pump 7.5Hp 12 Stage Three Phase , Submersible Motor Pump 10.5 Hp 5 Stage Three Phase , Submersible Motor Pump 10.5 Hp 8 Stage Three Phase , Submersible Motor Pump 10.5 Hp 12 Stage Three Phase , Submersible Motor Pump 10.5 Hp 20 Stage Three Phase , Centrifugal Monoblock Pump Motor Pump 1 Hp , Centrifugal Monoblock Pump Motor Pump 2 Hp , Centrifugal Monoblock Pump Motor Pump 3 Hp , Centrifugal Monoblock Pump Motor Pump 3Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 5Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 6.5 Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 7Hp Three Phase , Centrifugal Monoblock Pump Motor Pump 7.5 Hp Three Phase , Isi Mark Starter For 5 Hp Submersible Motor Pump , Isi Mark Starter For 12 Hp Motor Pump , Isi Mark Hdpe Pipe Roll For Sub. Pump In Borewell 50Mm X 4Mm X Per Meter , Isi Mark Submersible Cable Diameter 4 Mm Length Per Meter , Isi Mark Submersible Rope Yellow Borewell Submersible Pump Rope,Poly More Virgin And Braided Twisted Cord Twine Rope String (16 Mm,Per Meter Meter) , Auto Switch For Water Moter Starter Upto 12 Hp , Aluminium Armoured Power Cable-50 Sq Mm 3.5 Core , Clorine Dosing Machine Without Stand By System , Clorine Dosing Machine With Inbuilt Stand By System , 11 Ltr Dustbeen Pvc Without Leads , 15 Ltr Dustbeen Pvc Without Leads , 20 Ltr Dustbeen Pvc Without Leads , 35 Ltr Dustbeen Pvc Without Leads , 11 Ltr Dustbeenpvc With Lead , 15 Ltr Dustbeen Pvc With Lead , 20 Ltr Dustbeen Pvc With Lead , 35 Ltr Dustbeen Pvc With Lead , 11 Ltr Dustbeenpvc Swing Bin , 15 Ltr Dustbeen Pvc Swing Bin , 20 Ltr Dustbeen Pvc Swing Bin , 35 Ltr Dustbeen Pvc Swing Bin , 11 Ltr Dustbeenpvc With Pedal , 15 Ltr Dustbeen Pvc With Pedal , 20 Ltr Dustbeen Pvc With Pedal , 35 Ltr Dustbeen Pvc With Pedal , 20 Ltr Twinbin Pedal , 11 Ltr Dustbeensteel With Pedal , 15 Ltr Dustbeen Steel With Pedal , 20 Ltr Dustbeen Steel With Pedal , 30 Ltr Dustbeen Steel With Pedal , Dustbeen Rabbit Shape 10 Ltr , Dustbeen Rabbit Shape 15 Ltr , Dustbeen Rabbit Shape 20 Ltr , Dust Bin Big Double 110 Ltr Pvc With Stand , Dust Bin Big 110 Ltr Pvc , Dust Bin Big 120 Ltr Pvc , Dust Bin Big 100 Ltr Pvc With Wheel , Dust Bin Big 110 Ltr Pvc , Dust Bin Big 120 Ltr Pvc With Wheel , Dust Bin Big 240 Ltr Pvc With Wheel , Green And Blue Garbage Tri-Cyle Rickshaw , E Garbage Hydraulic Garbage E-Cart With Tipping Facility Three Wheeler , E Garbage Hydraulic Garbage E-Cart With Tipping Facility Four Wheeler , Refrigerator For Food Storage 50 Liters - 80 Liters Single Door , Refrigerator For Food Storage 150 Liters - 250 Liters Single Door , Refrigerator For Food Storage 250 Liters - 330 Liters Single Door , Refrigerator For Food Storage 350 Liters - 490 Liters Single Door , Air Condition 1 Ton 3 Star Split Inverter Ac , Air Condition 1.5 Ton 3 Star Split Inverter Ac , Air Condition 2 Ton 3 Star Split Inverter Ac , Air Condition 1 Ton 4 Star Split Inverter Ac , Air Condition 1.5 Ton 4 Star Split Inverter Ac , Air Condition 2 Ton 4 Star Split Inverter Ac , Air Condition 1 Ton 5 Star Split Inverter Ac , Air Condition 1.5 Ton 5 Star Split Inverter Ac , Air Condition 2 Ton 5 Star Split Inverter Ac , Desert Cooler Small , Desert Cooler Medium , Desert Cooler Large , Personal Cooler Small , Personal Cooler Medium , Personal Cooler Large , Led Tv 24 With Hdmi , Led Tv 32 , Smart Led Tv 32 , Android Led Tv 32 , Led Tv 40 , Smart Led Tv 40 , Android Led Tv 40 , Led Tv 42 , Smart Led Tv 42 , Android Led Tv 42 , Led Tv 50 , Smart Led Tv 50 , Android Led Tv 50 , Led Tv 55 , Smart Led Tv 55 , Android Led Tv 55 , Led Tv 75 , Smart Led Tv 75 , Android Led Tv 75 , Wall Mount Kit For Led Tv 24 Inch To 75 Inch , Installation, Labour Charges, Other Charges For All Type Of Tv , Led Screen 19.5 Hd , Lcd/Tft/Led Monitor For Pc - 17 Normal , Lcd/Tft/Led Monitor For Pc - 18 Normal , Lcd/Tft/Led Monitor For Pc - 18 .5 Normal , Lcd/Tft/Led Monitor For Pc - 19 Normal , Led Monitor For Pc - 19 Normal , Led Monitor For Pc - 19 Branded , Led Monitor For Pc - 22 Normal , Led Monitor For Pc - 22 Branded , Led Monitor For Pc - 22 Full Hd Branded , Led Monitor For Pc - 24 Full Hd Branded , Power Cable For Pc 1.5 Mtr , Power Cable For Pc 3 Mtr , Power Cable For Pc 5 Mtr , Power Cable For Pc 10Mtr , Vga Cable 5 Meter For Pc , Vga Cable 10 Meter For Pc , Hdmi Cable 1.5 Meter For Pc , Hdmi Cable 3 Meter For Pc , Hdmi Cable 5 Meter For Pc , Hdmi Cable 10 Meter For Pc , Surge Protector 1.5 Mtr , Surge Protector 3 Mtr , Surge Protector 5 Mtr , Surge Protector 10 Mtr , Aux Audio Cable 10 Mtr For Pc To Speaker , Projector Branded , Projector Un-Branded , Projector Celeing Mount Kit , Projector Screen Size 6X4 , Installation, Labour Charges, Other Charges For Projector , Elerning Syllabus Marathi Software Per Class (1 To 4) , Elerning Syllabus Urdu Software Per Class (1 To 4) , Elerning Syllabus English Software Per Class (1 To 4) , Elerning Syllabus Marathi Software Per Class (5 To 8) , Elerning Syllabus Urdu Software Per Class (5 To 8) , Elerning Syllabus English Software Per Class (5 To 8) , Elerning Syllabus Marathi Software Per Class (9 To 10) , Elerning Syllabus Urdu Software Per Class (9 To 10) , Elerning Syllabus English Software Per Class (9 To 10) , Training Charges For E Learning Software Per Sylabus , Pendrive 8 Gb , Pendrive 16 Gb , Pendrive 32Gb , Pendrive 64 Gb , Pendrive 128 Gb , Pendrive 256 Gb , External Solid State Drives:256 Gb , External Solid State Drives:512 Gb , External Solid State Drives: 1 Tb , External Solid State Drives: 2Tb , Mouse Usb Branded , Mouse Wire Less Branded , Keyboard Usb Branded , Keyboard Mouse Usb Combo Branded , Keyboard Mouse Combo Wire Less Unbranded , Keyboard Mouse Combo Wireless Branded , Speaker / Home Theater 4.1 , Speaker / Home Theater 5.1 , Trolley Spekar 12 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike , Trolley Spekar 18 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike , Trolley Spekar 8X2 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike Option For Two 6.35Mm Port For Mic And Tws Mode , Trolley Spekar 10X2 Woofer Bt/Usb/Sd/Fm/2 Wireless Mike Option For Two 6.35Mm Port For Mic And Tws Mode , All In One Printer (Inkjet Technology Monochrome) With Adf , All In One Printer Lejer Jet All In One , Printer All In One [Print / Scan / Copy] Mini Xerox Machine , Printer All In One [Print / Scan / Copy] Colour-Ink Jet , Printer Only For Print Laserjet Monochrome , Printer Only For Print Inkjet Monochrome , Colour Printer Only For Print Inkjet , Computer System [C2d/2Gb/500Gb Hdd] , Computer System (C2d/2Gb/1Tb Hdd) , Computer System [Ci3 8 Gen 4Gb Ram,1Tb Hdd,20 Screen, ,Keyboard,Mouse] Branded , Computer System [Ci3 9 Gen 4Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , Computer System [Ci3 10 Gen 4Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , Computer System [Ci3 8 Gen 8Gb Ram,1Tb Hdd,20 Screen, ,Keyboard,Mouse] Branded , Computer System [Ci3 9 Gen 8Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , Computer System [Ci3 10 Gen 8Gb Ram,1Tb Hdd,20 Screen, Keyboard,Mouse] Branded , All In One Pc (Ryzen 3 Dual Core 4 Gb Ddr4/1 Tb/Windows 10 Home/23.8 Inch Screen) , All In One Pc (Intel Pentium Core/ 4 Gb Ddr4/1 Tb/Windows 10 Home/23.8 Inch Screen) , All In One Computer Systembranded[Core I3,4Gb Ram,1Tb Hdd,,19To 24 Led] , All In One Computer System Branded[Core I5,4Gb Ram,1Tb Hdd,19 To 24 Led, Dos Wifi,Web Cam,Keyboard,Mouse] ] , All In One Computer System Branded[Core I3,4Gb Ram,1Tb Hdd,,19 To 22 Led, Dos Wifi,Web Cam,Keyboard,Mouse] ] , All In One Computer Systembranded[Core I5,8Gb Ram,128 Ssd, 1Tb Hdd,,27 Led,Windows 10 Wifi,Web Cam,Keyboard,Mouse] , All In One Computer Systembranded[Core I5,8Gb Ram,1Tb Ssd,,27 Led,Windows 10 Wifi,Web Cam,Keyboard,Mouse] ] , Ups For Computer System , Dvr 16Ch + 1Ip 2.4Mp , Dvr 16Ch [5 Mp Supported 2Ip Camera Supported] , Dvr 8Ch 2.4Mp Supported , Nvr 8 Ch([5 Mp Supported Ip Camera Supported] , Nvr16 Ch([5 Mp Supported Ip Camera Supported] , Surveillance Internal Hard Drive 4Tb , Surveillance Internal Hard Drive 2Tb , Surveillance Internal Hard Drive 1Tb , Dome Camera 2.4Mp , Bullet Camera 2.4Mp , Dome Camera 2.4Mp Ip Cam , Bullet Camera 2.4Mp Ip Cam , Bnc Connector , Power Connector , Power Supply 20Amp , Cctv Cable Bundle , Ip Camera 2.4 Mp , Poe Switch For 8 Ch , Poe Switch For 16 Ch , Poe Splitter For Ip Camera , Cat6 Cable Per Mtr , Pipe 10Ft Unit For Cctv Setup , Iron Wire In Kg (Min 300Ft) , Hook Packet , Labour Charges For Feeting Of Cctv Equipements , Ceiling Mount Kit For Cctv , Hevy Chairs For Kids , Baby /Kids Chair , Computer Wheel Chair , S Type Chair Non-Revolving And Non-Tilting Chair With Armrest , Office Chair Full Back Wheel , Office Chair Half Back Wheel , Office Chair Mid Back Wheel , Portable Foldable Wheelchairs For Handicap , Fiber Chair , Fibre Chair With Cushion Normal , Round Table With Chair Set , Three Seatervisitor Bench-Metal , Cement Bench For Park , Iron Patient Hospital Basic Examination Table , Wooden School Benches And Desks, Seating Capacity: Double 01 To 04 , Wooden School Benches And Desks, Seating Capacity: Double 5 To 8 , Wooden School Benches And Desks, Seating Capacity: Double 9 To 12 , Office Table 3X6 Feet , Office Table 2.5X5 Feet , Office Table 2X4 Feet , Office Table 2X3 Feet , Office Table Executive , Table Top Glass Thickness 12Mm Sqr Per Feet , Table Top Cloth( Velvet Quilted Cloth, Gsm 150) Per Meter , Table Name Plate( Clear Acrylic 2-Sided V-Shaped Desktop Sign Display Stand Name Plate 2 X 8 Inch) , Office Cupboard 6.5 Feet Steel/Iron , Office Cupboard 5.5 Feet Iron , Office Cupboard 4.5 Feet /Iron , Office Cupboard 6.5Ft With Locker , Industrial Locker Steel Almirah - 8 Locker Number Of Compartments , Book Rack4 Shelves Paint Coated Iron Almirah Bookshelf , Basics Storage Rack 7 Shelf 118X12x36 Inch Udl , Basics Storage Rack 6 Shelf 118X12x36 Inch Udl , Basics Storage Rack 5 Shelf 118X12x36 Inch Udl , Basics Storage Rack 4 Shelf 118X12x36 Inch Udl , Celeing Fan 1200 Mm , Table Fan 16 Inch , Pedestal Fan 16 Inch , Wall Mount Fan 400 Mm , Steel Bucket 10 Ltr , Steel Bucket 15 Ltr , Steel Bucket 20 Ltr , Fiber Bucket 10 Ltr , Fiber Bucket 15 Ltr , Fiber Bucket 20 Ltr , Permenant Marker Pen Box 10 Nos , Sticky Notes Paper Flag 15Mm X 76Mm Multicolour , Stapler Big Size Half Strip All Metal , Stapler Pin Big Pin Size 24/6 Pin Box , Stapler Medium Size Half Strip All Metal , Regular Pin 10 No Not Stapler Pins Box , Paper Punching Machine Small Size , Paper Punching Machine Medium Size , Paper Punching Machine Big Size , Ice Pick(Tocha) , A4 Size Paper Rim Single Psc 65 To 70 Gsm , Legal Size Paper Rim Single Psc 65 To 70 Gsm , Stamp Pad,110 X 69 Mm Small , Stamp Pad 155 X95 Mm Large , Stamp Ink Bottel 25 Ml Voilet/Red/Black , Butter Flow Ball Pen Single Pcs , Gripper Pen Single Pcs , Acrylic Name Plate Size 10X24 Inch , Acrylic Name Plate Size 60X90 Inch , Calculator 112 Step Check And Correct 12 Digit , Glass Paper Weights (Set Of 1, Multicolor) , Cotton Paper Tag, Red Advocate Paper Tie Tags 50 Pieces , File Cotton Laces, (22 Inch Long Each,50 Piece) , Plane Register 1 Quire Set On 1 Piece , Plane Register 2 Quire Set On 1 Piece , Plane Register 3 Quire Set On 1 Piece , Plane Register 4 Quire Set On 1 Piece , Spring File - Fullscape, Multicolour,(Normal File) 1 Piece , Tep Finest Paper File Record File (High Quality File) 1 Piece , Cardboard Box Files 1 Piece , Head Pins Fine Satin Pin Craft Single Box 100 Pcs , Glue Stick 5G , Glue Stick 15G , Gum - Lime 50 , Paste Gum Bottle 100Ml , Paste Gum Bottle 200Ml , Gum - Lime, 200Ml Bottle , Paste Gum Bottle 300Ml , R O Can 20 Ltr , Ro 12 Ltr With Storage Tank With Feetings And Nessesory Parts , Ro 15 Ltr With Storage Tank With Feetings And Nessesory Parts , Ro 25 Ltr With Feetings And Nessesory Parts , Water Cooler 60 Ltr With Two Tap Capasity , Water Cooler 80 Ltr With Two Tap Capasity , Water Cooler 120 Ltr With Two Tap Capasity , Curtnes Per Sq Mtr , Carpate Per Sqr Ft As Per Requirement , Chappal / Shoes Stand , Mat For School Kids 26 Pcs Set , Satranji 10X20 , Satranji 10X15 , Satranji 6X9 , Printed Plastic Floor Mat, Mat Size: 6 X 9 Feet , Bhojan Patti 1.5X 6 Floor Mat , 36 Pieces Alphabet & Number Floor Mats , Mirror Plastic Frame Mirror , Led Light 15 Watt , Led Light 18 Watt , Led Light 20 Watt , Pendent Lam Holder , Led Tubelight - 20W , Led Street Light 40 Watt , Led Street Light 30 Watt , Led Street Light 25 Watt , L Shape Pipe For Led Street Light , Clamp For L Shape Pipe Streetlight And Pole , All In One 9W Solar Street Light With Pole And Installation , All In One 15W Solar Street Light With Pole And Installation , All In One 18W Solar Street Light With Pole And Installation , All In One 25W Solar Street Light With Pole And Installation , All In One 25W Solar Street Light With Decorative Pole With Simple Light And Installation , All In One 25W Solar Street Light With Decorative Pole With Round Shape Of Single Arm And Light With Installation , All In One 25W Solar Street Light With Decorative Pole With Round Shape Of Two Arm And Light With Installation , Wire 1.5 Sq Mm Black Fr Pvc Housing Length 90 Mtr , Wire 2 Sq Mm Black Fr Pvc Housing Length 90 Mtr , Wire 2.5 Sq Mm Black Fr Pvc Housing Length 90 Mtr , Solar Polycrystalline Off-Grid Solar Photovoltaic (Pv) Power Plant, Capacity 1 Kva With Installation , Solar Polycrystalline Off-Grid Solar Photovoltaic (Pv) Power Plant, Capacity 2 Kva With Installation , Solar Polycrystalline Off-Grid Solar Photovoltaic (Pv) Power Plant, Capacity3 Kva With Installation , Grid Connected Rooftop Solar System 1Kw Solar System With Installation And Other Charges Are Included , Grid Connected Rooftop Solar System 2 Kw Solar System With Installation And Other Charges Are Included , Grid Connected Rooftop Solar System 3 Kw Solar System With Installation And Other Charges Are Included , Grid Connected Rooftop Solar System 5 Kw Solar System With Installation And Other Charges Are Included , Solar Unit Complete Set With Installation For Anganwadi/School [Fan X 1, Led Bulb X 1 With Fitting & Installation] , Solar Unit Complete Set With Installation For School/Anganwadi/ Office [1 Computer, Fan,2Light,] , Solar Unit Complete Set With Installation [ Fan X 4, Pc X 1, Light X 4, 1Hr Backup With Fitting & Installation]] , Solar Hi Mast Complete 1 Set Of 20 Watt , 50W Spv Solar Combo Including 12V/40Ah Artheon Battery With Installation , Solar Pump 7.5 Hp With All Accessories, Solar Mono Pv Panels And Installation , Inverter 1225 (12V) For Office Ups, Assorted, Standard Isi Mark , Isi Mark Inverter Tubular Battry , Fogging Machine Branded Single Blor , Fogging Machine Un-Branded Single Blor , Sanitary Pad Vending Machine , Sanitary Pad Disposal , Sanitary Pad Product Dimensions: ?21 X 7.3 X 13 Cm Per Nos , Sanitary Pad Extra Long ?Product Dimensions ?23.5 X 9.2 X 13 Cm Per Nos , Custome Face Mask , 3 Ply Face Mask , Ppe Kit , Plastic First Aid Kit With Medicines , Steel/Metal First Aid Kit With Medicines , Baby Rediant Heat Warmar , Stethoscope , Human Body Weight Machine Digital , Baby Weighting Machine Digital , Baby Weight Slater , Digital Infrared Thermometer Gun , Digital Thermometer , Finger Tip Puls Oximeter , Fully Automatic Digital Blood Pressure Monitor , Analog Blood Pressure Monitor , All In One Steam Vaporizer Machine , Hemoglobin Digital Monitor , Sterile Surgical Glove 6-Inch Pre-Powdered-Box Of 50 Pairs , Compressor Nebulizer , Blood Glucose Monitor , 25 Test Strips Glucometer , Electrical Needle Syringe Destroyer , Manual Hub Cutter , Infantometer , Mortuary Cabinet Freezer Single Person/Body , Mortuary Cabinet Freezer Double Person Body , Bleaching Bag 25 Kg , Iron Patient Hospital Bed, Dimension: 2030X900x500mm Non Adjustable With Iv Rod , Iron Patient Hospital Bed Manual Dimension: 3 X 6 Feet , Steel Folding Cot Iron Frame , Laptop Office Bag Multicolour Leather P.U. Office Bag , Rechargeable Led Bulb 9Watt , Rechargeable Ultra Led Torch 0.5 Watt , No Dust Broom Xl , Ceiling Cleaning Broom , Pochha With Bucket , Dust Pan Fibre , Dust Pan Ss/Metal/Iron , Vacuum Cleaner Wet And Dry 1150-Watt , Thermos Stoneware Tea Kettle Set 1000 Ml , Cup And Soucer And Tea Set , Rack For Medicine , Magazine Stand Revolving , Plastic Jar For Water 2 Ltr , Sliding Glass Notice Board 60 X 90 , Sliding Glass Notice Board 90 X 180 , Plastic Mug For Home And Bathroom 1.5Litre , Vehicle Mountable Fogging Machine Operated Electrical Double Blor , Vehicle Mountable Fogging Machine Operated Electrical Single Blor , Commercial Slide Ladder , Presentation Dias Stand Made-Up Stainless - Steel Color Royal Red - Height 4 Ft X 1.5 Ft Width. (For Offices, School, Public Speech & Conferences) , Presentation Dias Stand Made-Up Wooden Width - 61 Cms, Depth - 45 Cms, Height - 123 Cms. Material - Engineered Wood, Laminated Board. Colour - Two-Tone , Photo With Frame Standard Size For Office , Stadiometer (Height Measuring Scale For Adults And Children) , Blanket , Pvc Floor Covering Carpets Width : 1.5 Meter Thickness 0.65, To 1.00 Mm Designs : Mat Finish (Enter Rate In Per Square Meter) , Pvc Floor Covering Carpets Width : 2 Meter Thickness 0.65, To 1.00 Mm Designs : Mat Finish (Enter Rate In Per Square Meter) , Hand Wash Station Foot Operted 1 User With Pvc Water Tank 200 Ltr , Hand Wash Station Foot Operted 2 User With Pvc Water Tank 200 Ltr , Hand Wash Station Foot Operted 3 User , Hand Wash Station Foot Operted 4 User , Automatic Sanitiser Dispenser Machine , Alcohol Based Hand Sanitizer 5 Ltr Can , Alcohol Based Hand Sanitizer/ 500 Ml Sprey Bottle , Alcohol Based Hand Sanitizer 100 Ml Sprey Bottle , Alcohol Based Hand Sanitizer 50 Ml Sprey Bottle , Sodium Hypochlorite 50 Kg Can , Jeevan Drop 100 Ml Bottel , Iron Patient Hospital Bed, Dimension: 2030X900x500mm Non Adjustable With Iv Rod , Iron Patient Hospital Bed Manual Dimension: 3 X 6 Feet , Aluminum Grain Storage Container 100 Kg Capacity , Aluminum Grain Storage Container 50 Kg Capacity , Grain Storage Tank 20 Kg , Water Jar 2 Ltr Capacity Steel , Water Jar 2 Ltr Capacity Pvc , Aluminium Kadai 8 Ltr , Gas Bhatti Single Burner , Gas Bhatti Double Burner , Stainless Steel Round Kitchen Baskset , Aluminium Pot Heavy Patila/Rice Boiler Tope No 18 (10L) Tope 10 L Capacity 26 Cm Diameter , Aluminium Pot Lead For Patila/Rice Boiler Tope No 18 26 Cm Diameter 10L , Water Tank 18 Ltr Steel , Plate Pawbhaji Style , 5 Layer 30 * 30 Inch Wall Mount Modern Kitchen Utensils Dish Rack , Pressure Cooker 5 Ltr , Pressure Cooker 10 Ltr , Pressure Cooker 12 Ltr , Pressure Cooker 14 Ltr , Pressure Cooker 22 Ltr , Ss Milk Can/Oil Can 2 Ltr , Aluminium Pot Heavy Patila/Rice Boiler Tope No 18 (25L) Tope 25 L Capacity 26 Cm Diameter , Aluminium Pot Lead For Patila/Rice Boiler Tope No 18 26 Cm Diameter , Stainless Steel Serving Spoon For Rice Boiler , Stainless Steel Kitchen Pincers/Sandshi/Pakkad , Water Pot/Handa/Beda 10 Ltr Steel Food Grade , Stainless Steel Parat, Material Grade: 202 Size 28 , Stainless Steel Bowl/Vati , Donga Spoon , Spoon Serving Ss To Cqa Steel Sarata , Stainless Steel Serving Tray Large Size , Serving Tray Set Of 3 , Tea Spoon , Break Fast Spoon , Ss Water Glass Standard Size , Chalni/Stainer For Grain , Steel Plate , Chapati/Roti/Papad Manual Maker Press , Stainless Steel Storage Containers With Lead , Capacity: 5Kg , Stainless Steel Storage Containers With Lead , Capacity: 10 Kg , Stainless Steel Storage Containers With Lead , Capacity: 15 Kg , Stainless Steel Storage Containers With Lead , Capacity: 20 Kg , Stainless Steel Storage Containers With Lead , Capacity: 25 Kg , Tople Steel , Tople Plastic/Fibre , Wagrale , Belan Polpat , Iron Kadhai 150 Litre , Aluminium Patila Big 110 Ltr , Stainless Steel 2 Burner Gas Stove, Manual Ignition , Strainer Steel Frying Spoon , Mixer Grinder 550 Watts With 3 Multi Ouroose Grinding Jars , 1.5 Hp Table Top Atta Chakki Mini Flour Mill , Magnetic Sticks Puzzle Game For Kids (36 Pcs) , Interactive Fruit Cutting Game 8-Piece , Tower Block Game , Kids Kitchen Set Game , Rocker Horse/Elephant /Etc Ride On Toy , Fruit Set Multicolour , Abcd Slate And Block , Building Abcd Name , Carrom With Coin, Striker,And Powder , Bat Ball Without Stumps For Kids Up To 12 Year Kids Plastic , Bat Ball With Stump For Kids Up To 12 Year Kids Plastic , Badminton Racket Set Of 2 Bat , Badminton Shuttlecocks 10 Psc Box , Skipping Rope Adjustabe Hights For Kids , Skipping Rope Adjustabe Hights With Counting System , Handcrafted Wooden Indian Traditional Lagori , Teddy Rings - 7 Rings , Magic Speed Rubics Cube Size 2.5 Cube , Standard Cotton Swing , Babys Tricycle (Multi -Colour 86X64x33 Cm, 1-3 Years) , Soft Foam Cricket Bat With Ball For Kids O To 8 Yrs , Vegetable Set, Multi Color , Racket Set With Ball & Shuttlecock For Kids Plastic Table Tennis Set , 12Pc Big Size Animal Kids (12 Pcs Big Animal Set) , Flying Disk For Kids Game 03 To 06 Yrs , Hula Hoop Ring - Multicolour For Kids , Flash Card 9.5 Cmx 1375 Cm Set Of 5 Pcs , Small Board Book Set Of 5 - English - 2 To 5 Year Set Of Five As Per Requirement , Building Block For Kids ,42 Pcs Bag Packing (Multicolour) , Play Ball Set Medium Multicolour Set Of 10 Balls , Play Ball Big Size Set Multicolour Set Of 6 Balls , Abcd/Education Chart 5 Pcs Set 65X55 Cm Aprrox Size , 3D Alphbets Learning And Drawing Book , Magic Slate (Multicolor-Digital Slate Lcd E-Writing Board Electronic Notebook Graphic Tab With Pen) , Basket Ball For Kids , Side Drum Steel 14 Inch With Belt, Stick And 2 Fiber Sheet Free , Thap Dhol Ss,17.2 Inch , Lezim Instruments Standard Size , Wooden Dumbbells For Pt 1 Set , Tennikoit Ring Dotted & Plain(Pack Of 6) , Mrudung / Mridangam , Nickel Plated Handmade Musical Iron Tabla Set , Wooden Standard Harmonium Harmonium , Handmade Jhanjh , Piano Portable Keyboard 61 Keys , Professional Flutes C Sharp Medium Right Hand Bansuri Size 18.5 Inches , Cricket Bat Cricket For Kids 6 To 12 Year Wood , Cricket Ball For Kids 6 To 12 Year , Cricket Stumps For Kids 6 To 12 Year Wood , Cricket Bat Cricket For Kids 12 To 16 Year Wood , Cricket Bat Standard Size , Cricket Tennis Ball Standard Size Box 6 Pcs , Cricket Stumps Standard Size 6 Nos , Foot-Ball Standard Size , Foot-Ball Net Standard Size , Volleyball , Volleyball Net , Kho-Kho Pol Pair Standard Size Wood , Chess Board With Coin , Tent House Jumbo Big Size , Doll House & Accessories For Girls Age 3Y+ , Doll House Playhouse Playset , Doctor Set Kids Game , Toy Counting Frame Plastic , Puzzle Set , Seasaw Toy , Slide , Swing Car L76xw35x48 Approx , Wooden Block Set , Foot Basic Sewing Machine , Frp Indoor Merry Go Round , Outdoor Merry Go Round , Dholki Small For Kids Playing 3 To 12 Yrs , Park Metal Single Swing 10 Feet , Park Metal Double Swing 10 Feet , Park Metal Slide 9 Feet , Magical Handwriting Workbook Pen And Refills , Nursery Board Book , Easy Copy Colouring Book With 12 Shades Wax Crayons , Kids Painting Set , Adjustable 3-In-1 Plastic Swing For Kids With Rope And Accesorries , Dart Game With 2 Dart Pin , Alpha Numeric Plastic Leeter World -Educational Toys , Flash Cards Learning & Education Game , 6 Puzzle Board , Interactive Board , Black Board 4X6 , White/Green Board 3X4 , White-Green Board 4X6 , Writing Chalk Multi Colour 50 Chalk Sticks In The Box , Writing Chalk White Or Single Colour 50 Chalk Sticks In The Box , White Board Marker Pen- Box 10 Nos , Tablet 4 G Sim Supported (10.1) Hd , Mobile 4 G Supported , Mega Phone , Nail Cutter For Kids , Paydan , Round Dust Bin Metal [Blue + Green With 2.5Ft Stand] , Wall Watch Big Size , Fibre Toilet Single User -1 Unit , Fibre Toilet Double User -2 Unit , Fibre Toilet Four User -4 Unit , T-Shirt [24 Number,Pp Cloth] , T-Shirt [26 Number,Pp Cloth] , T-Shirt [28 Number,Pp Cloth] , T-Shirt [30 Number,Pp Cloth] , T-Shirt [32 Number,Pp Cloth] , Lower [24 Number, Sp Cloth] , Lower [26 Number, Sp Cloth] , Lower [28 Number, Sp Cloth] , Lower [30 Number, Sp Cloth] , Lower [32 Number, Sp Cloth] , Shoes & Socks For Boys,Girls 1 Number , Shoes & Socks For Boys,Girls 2 Number , Shoes & Socks For Boys,Girls 3 Number , Shoes & Socks For Boys,Girls 4 Number , Shoes & Socks For Boys,Girls 5 Number , Soft Cotton Washcloths, Napkin, Hankies For Baby , Baby Gift Kit Items Included In The Gift Pack:As Per Technical Sheet , 5 Annual Periodical Maintenance Cable Wire 1 Bundle 80 Meter , 16 Annual Periodical Maintenance Cable Wire 1 Bundle 80 Meter , 5 Annual Periodical Maintenance One Way Electrical Switch , 5 Annual Periodical Maintenance Two Way Electrical Switch , 16 Annual Periodical Maintenance One Way Electrical Switch , 16 Annual Periodical Maintenance Two Way Electrical Switch , 5 Annual Periodical Maintenance Plug Socket 3 Pin , 16 Annual Periodical Maintenance Plug Socket 3 Pin , Fan Regulator Dimmer Switch , 16 Annual Periodical Maintenance Mcb Switch , 32 Annual Periodical Maintenance Mcb Switch , Mcb Swich Box -4 -Door , Mcb Swich Box -8 -Door , Mcb Swich Box -12 -Door , Mcb Swich Box -18 -Door , 16 A Modular Electrical Switch Board, Module Size: 2, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 4, Ip65 , 16 A Modular Electrical Switch Board, Module Size:6, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 8, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 12, Ip65. , 16 A Modular Electrical Switch Board, Module Size: 14, Ip65 , 16 A Modular Electrical Switch Board, Module Size:16, Ip65 , 16 A Modular Electrical Switch Board, Module Size: 18, Ip65 , Dry Soybeans Organic Soybean Seeds 1 Kg Packing(Mahabeej Or Govt A Approved By Nsc,Sfci , Swami Vivekananda Jivan Charitra Motivational Biography Book Marathi , Rashtramata Jijau Charitra Marathi , Bhartache Sanvidhan The Constitution Of India Marathi , Sanskardeep Shraddha Prakashan Marathi Book , Mazi Atmakatha, Autobiography Of Dr. Babasaheb Ambedkar Marathi Book , Lokraja Shahu Maharaj - Vyaktittva Aani Vichar Marathi Book , Yugpravartak Shivaji Maharaj Yanche Charitra Marathi Book , Kalika -V.S. Khandekar Marathi Book , Shyamchi Aai Marathi Book , Ase Ghadale Dr. A.P.J. Abdul Kalam - Marathi Book , Jhansi Chi Rani Laxmi Bai Marathi Book , Rangatdar Goshti Book Set Of (Red,Brown, Yelow,Green,Blue,Pink And Purple Clour Set) Navneet Set Of 7 Books , Hitopadesh Set Of 4 Books Navneet , Gosti Ashya Majach Maja Set Of 4 Book Navneet , Chatur Birbal Set Of 5 Books Navneet , Air Walker Single Out Door Gym , Air Walker Doudle For Out Door Gym , Shoulder Press Single For Out Door Gym , Shouler Press Double For Out Door Gym , Chess Press Single For Out Door Gym , Chess Press Double For Out Door Gym , Horizatial Bar For Out Door Gym , Abdominal Exercise Double For Out Door Gym , Eliticipal Trainer Single For Out Door Gym , Eliticipal Trainer Double For Out Door Gym , Rowing Machine For Out Door Gym , Cycle For Out Door Gym , Sit And Stand Twister For Out Door Gym , Triple Twister For Out Door Gym , Leg Press Double For Out Door Gym , Parallel Bar For Out Door Gym , Surf Board For Out Door Gym , Dipping Bar For Out Door Gym , Bench Press For Out Door Gym , Cross Walker For Out Door Gym , Knee Chair For Out Door Gym , Steeper And Twister For Out Door Gym , Shoulder And Chest Press For Out Door Gym , Horse Rider For Out Door Gym , Leg Stretch For Out Door Gym , Usb Rechargeable Electric Gas Lighter For Kitchen Gas Stove , Rod 4 Feet Zig Zag Indoor Gym , Rod 5 Feet Regular Indoor Gym , Rod 1 Feet Regular Indoor Gym , Standard 28Mm Rubber Weight Plates Indoor Gym , Dumbels Rubber Coated Olympic Rate Per Kg For Any Pair Without Rod And Other Accessories Indoor Gym , Multi Bench Premium(Chest, Leg, Curl, Leg Extension )3 In One Indoor Gym , Leg Curl / Leg Extension Indoor Gym , Bicep Curl Machine Indoor Gym , Adjustable Squat Rack Stand Material Alloy Steel Indoor Gym , Calf Muscle Machine Product Indoor Gym , Stepper With Riser For Indoor Gym , Gym Dumbbell Rack Material Iron, Indoor Gym , Weight Plates Storage Rack For Gym Material ? Indoor Gym , Yoga Mat Indoor Gym , Hbnc Kit For Asha Worker Including Including 9 Items As Per Bom , Multicolour-4K, Matte Vinyl Stickers Educational Rate Per Sq Feet Special Repair No Item Name & Its Technical Specification , Dvr 8/16Channel [Min 2.0Mp(1080P),8Ch Turbo Hd Dvr,H264,H264+ & Dual Stream Video Compression,Hd-Tvi,Support Ahd,Analog Camera With Adaptive Access,Rj45,Usbx2,Mouse Support,Upto 6Tb Hdd Support] , Dome Camera [Lance 3.6Mm,1080P,0.01 Lux @F1.2,0 Lux With Ir, True Day, & Night,,Ir Distance 20 Mm,Dc 12V,4W Max] , Bullet Camera [Lance 3.6Mm,1080P,0.01 Lux @F1.2,0 Lux With Ir, True Day, & Night,,Ir Distance 20 Mm,Dc 12V,4W Max] , Hard Disk For Dvr [Capacity Min 2Tb,Sata6.0Gb/S,Min7200 Rpm, Waranty Min 2Yr] , Cable Bundle [Minimum 80Mtr,Copper 3+1,Min 22Gadge] , Bnc Connector Copper [Screw Adjustable] , Power Connector Copper [Screw Adjustable] , Cctv Fitting Labour Charges [Cctv Cable Fitting,Dvr Installation,Camera Installation] , Power Supply [Min 12Volt,10Amp] , Led Display Screen [Size :19.5 Inch (49.5Cm) Hd (1600X900)Tn Panel, Vga Port,Dsiplay Port,Aspect Ratio: 16:9,Brightness (Typical):250Cd/M,Voltage :120Volts,Wattage:15Watt,Waranty Min 1 Year] , Projector [Projector Brightness: 300 Ansi Lumens Projection Technology: Dlp Projector Native Resolution: Wxga (1280X800) Contrast Ratio (Typical): 2200:1 Native Aspect Ratio: 16:10 Screen Size Compatibility: 36.2 - 362.7 Projection Distance: 1.2 - 10 M Service Life Of Lamp: 3000 Hbulb Power: 260 W Service Life Of Lamp (Economic Mode): 5000 H Throw Ratio: 1.28 -1.536 Ceiling Mount : Optional Accessory, Sold Separately Carrying Case : Optional Accessory, Sold Separatelywarranty : 5 Years For Product, 1 Year For Bulb] Mfg Warranty , Projector Screen [Supports Ultra Hd, 3 D And 4 K Technology, Spring Action Mechanism, Autolock/Instalock Mechanism, You Dont Need To Hook The Screen At The Bottom To Stop Size: - 6 Feet (Width) X 4 Feet (Height), In 4:3 Format, 84 Inches/7 Feet Diagonal Length, Comes With 1.2 Gainapprox.Keeps Your Eyes Strain Free While Viewing, Comes With Anti Uv Coating To Protect Eyes, A+++++ Grade Fabric, Ideal For Presentations, Meeting Rooms, Home Cinema.Comes In Imported Easy To Clean Super High Gain Fabric/Material, Black Coated Screen Material From Back Side Eliminates Light Penetration For Superior Color Reproduction, Complimentary Four Side Black Masking Borders Enhances Picture Contrast,.] , Led Tv 40 Inch Hd Ready (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1) Minimum 3 Year Warranty , Smart Led Tv 40 Inch Hd Ready- Smart Tv Minimum Android Version 4.4, Cpu- Minimum Dual Core 1.2 Ghz Storage Min. 4 Gb, Built In Wifi (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1), Pc Audio In , Ypbpr,Lan,Tf Slot,Audio Out, Spdif Out)- Minimum 3 Year Warranty , Led Tv 32 Inch Hd Ready (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1) Minimum 3 Year Warranty , Smart Led Tv 32 Inch Hd Ready- Smart Tv Minimum Android Version 4.4, Cpu- Minimum Dual Core 1.2 Ghz Storage Min. 4 Gb, Built In Wifi (80Cm,Hd Display,Max Resolutions 1366X768,Hdmix2,Usb 2.0 X 2,Vga X 1,Av In X 1, ,Tv (Rf) In X 1, Audio Out X 1), Pc Audio In , Ypbpr,Lan,Tf Slot,Audio Out, Spdif Out)- Minimum 3 Year Warranty , Speaker System 4.1 [Min Specifications: Usb + Fm+Sdcard, 1 Main Unit,4 Speaker,1 Remote,1 Audio Cable] , Trolley Speaker Small With Wireless Mic Nos -2:: Technical Specifications Wireless Bluetooth Trolley Speaker Digital Karaoke,Treble And Bass Independent Adjustment Professional Treble And ; Bass Gain Controlling Circuit Built-In Professional Wireless Microphone System Built-In Mp3 Encoding Support Connection Type:Bluetooth, Usb , Fm Radio,Tf Card, Aux In Port, Micin Compatible With Dvd/Pc And Other Sound Source Intelligent Power Switch Charging Circuit User Friendly Trolley 8 Meters Operating Range , Upto 4.5 Hours Of Playback Total Output 60W Rms Controls: Sound, Mode And Track Controls Two Wireless Mics And ; Remote Included In Box Subwoofer Size : 12 Inch , Trolley Speaker Medium With Wireless Mic Nos -2: Wireless Bluetooth Trolley Speaker . Digital Karaoke,Treble And Bass Independent Adjustment Professional Treble & Bass Gain Controlling Circuit Built-In Professional Wireless Microphone System Built-In Mp3 Encoding Support Connection Type:Bluetooth, Usb , Fm Radio,Tf Card, Aux In Port, Micin Compatible With Dvd/Pc And Other Sound Source Intelligent Power Switch Charging Circuit User Friendly Trolley 8 Meters Operating Range , Upto 4.5 Hours Of Playback Total Output 80W Rms Controls: Volume, Mode And Track Controls Two Wireless Mics & Remote Included In Box Subwoofer Size : 15 Inch , Trolley Speaker Large With Wireless Mic Nos -2:Wireless Bluetooth Trolley Speaker , Total Output 120W Rms Treble And Bass Independent Adjustment Connection Type: Bluetooth, Usb , Fm Radio,Tf Card, Aux In Port, Mic In Compatible With Dvd/Pc And Other Sound Source User Friendly & Sturdy Adjustable Trolley With Digital Led Display 10 Meters Operating Range Controls: Volume, Mode And Track Controls Two Wireless Mic. Full Function Remote Subwoofer Size : 18 Inches & Tweeter 8 Internal & External Battery Support , Ups 600Va [Minimum Specifications :Capacity:600Va/360W,Nominal Voltage:230Vac,Output Voltage :230Vac,Battery:12V/7Ahx1,Bkp Time:10-15Mins,Max Net Weight :4.2Kg] , Wall Mount Kit Compatible For 32 Tv , Elerning Syllabus Software [Animated With Sound] , Computer System All In One [Cel Quad Core,4Gb Ram, 1Tb Hdd,20 Screen] , Computer System Cpu [Dual Core,2Gb Ram,160Gb Hdd] , Keyboard [Port : Usb, Type:Standerd,Keys Minimum:104] , Keyboard [Wireless , Type:Standerd,Keys Minimum:104] , Mouse [Port :Usb, Type:Optical,Keys :Minimum :03] , Mouse Wireless Type:Standerd,Keys Minimum:104] , Power Cable 1.8Meter For Pc , Vga Cable 1.8 Meter For Pc , Surge Protector [Minimum 4 Port,1 Fuse] , Training Charges , Installation, Labour Charges,Other Charges , Cricket Bat [5Number Full Size,Kashmir Willow] , Rubber Ball [Hevy Tennis] , Rubber Ball [Light Tennis] , Stump Set (3Qty)[Full Size, Kashmir Willow] , Rubber Ring [Regular Plane] , Badmintan Racket Set [Regular] , Football [5Number, Waterproof] , Flying Ring [Fibre,Size:Regular] , Hoops Ring [Fix] , Lagori Set [Lagori Set, Wooden] , Lagori Ball [Lightweight, Rubber] , Skip Rope [Plastick Handle, Rubber Rope,1Mtr] , Hollyball[5Number,Waterproof] , Hollyball Net[Cotton,14Mesh] , Single Slide Min 3Ft , Double Swing , Single Seasaw [Gf-70A, 6] , Toys Installation Charges , Office Chair [High Back)Product Dimensions: Length (21 Inches), Width (21 Inches), Height (48 Inches) Primary Material: Leatherette Color: Black, Style: Modern Adjustable Seat Height Tilt Mechanism Nylon Wheels , Office Chair [Medium Back)Product Dimensions: Length (20 Inches), Width (20 Inches), Height (41 Inches) Primary Material: Leatherette Style: Modern Adjustable Seat Height Tilt Mechanism Nylon Wheels , Office Chair Fibre Product Dimensions: Length (61 Cm), Width (61 Cm), Height (89 Cm) Style: Modern Stylish, Modern And Sturdy Chair Wide Seat With Arm Rest For Comfortable Sitting Experience Suitable For Indoor As Well As Outdoor Distinct Design For Backrest , Fogging Machine [Black Stone] , Educational Wall Chart Set (5Pcs, Animal, Abcd, Number,Fruits,Vegitables) , Height Charts [Ph6031 W20 X H47] , Animal Set [Ph1400] , Fruit Set [Ph8001+Ph8000] , Rocker Toy [Pgs401/F L36 X W13 X H18] , Rideon [Pgs1404 L28.7 X W10 X H20.5] , Mani Slate [Ph155 Counting Frame] , Tedy Ring [Min 5Ring Set] , Plastic Ball Big , Flying Ring [Ph160,D21.5] , Playball Set [Min 50Pcs,Min D6.6Cm Pgs601] , Two Way Essel Board [Pgs 701 L28 X W24 X H42] , Grain Storage [Capacity Min 50Kg , All In One Printer- Main Input Tray 150 Sheets Of Regular Weight 75 G/M2 (20-Lb Paper )Priority Feed Slot 10 Sheets Of Paper Up To 163 G/M2 (43 Lb) Top (Face Down) Output Bin 100 Sheets Of Regular Weight 75 G/M2 (20-Lb Paper )Output Bin60 To 105 G/M2 (16 Lbsto 28Lbs ) Print Speed14 A4 Pages Per Minute (Ppm), 15 Letter-Size Ppm First Page Out In As Low As 8 Seconds Print Resolution Fastres 600: This Setting Provides 600 Dpi Effective Output Quality. Fastres 1200: This Setting Provides 1200 Dpi Effective Output Quality. Economode: Text Is Printed Using Less Toner. Duty Cycle 8,000 Single-Sided Pages Per Month (Maximum) 1,000 Single-Sided Pages Per Month (Average) Power Consumtionas Per Fcc Compliance , Suppluing And Erecting Street Light Fitting Suitable To 30W Lamp, Including Lamp, With Pf0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete As Per Specification No Fg-Odf/Fls2 Item No.2-9-3 , Suppluing And Erecting Mains With Isi Mark Wp 2 X 4 Sq.Mm. 1100V. Grade Aluminium Pvc Insulated And Pvc Sheathed Wires On G.I. Bearer Wire No. 8 Swg Complete Erected With Required Size Of Porcelain Reel Insulators And 16 Swg Gi Binding Wire , Ro Water Filter 25 Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Ro Water Filter 50Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Ro Water Filter 100 Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Ro Water Filter 200Ltr [1 Yr Onsite Service, 100+150Gpd Pump Bnqs ,Memron Tfc/Blue Mount X 3, Carben Sandfilter,Bowls] , Water Tank 4 Layer Tank 500 Ltr , Water Tank 4 Layer Tank 1000 Ltr , Non-Electric Water Purifier It Boasts Of Electro Adsorption Technology (Eat) Based Filter Which Gives The Power Of 4 Filters In One Physical Filter. Water Is Passed Through A 5 Stage Purification Process I.E. One Pre-Filter And 4 Filters Under Eat. The Filter Is Self-Serviceable I.E. We Can Change It Ourself When It Is Required. The Natural Essential Minerals Are Maintained In The Water Thus Giving Us Clean And Healthy Water. This Water Purifier Doesnt Waste Water. Tank Capacity: 6 Litres Flow Rate: 1 Litre Per Minute Life Of Eat Filter: 12 Months 2-Year Warranty And Even Works Under Low Water Pressure Conditions. Non-Electric , Electronic Infant, Baby Weighing Scale Conformity To Indian Standrad, Is:9281-3 (1981) Part I,Ii, Iii & Part Iv (Latest) Yes Bis Marked Yes Display Led Battery Backup True Speed Of Measurement 5 Second Class Type Class-Iii Rated Load/ Capacity(Kg) 20 Kg Backup Time(Hour) 12 Internal Calibration True Power Requirement Mains Operated Battery Operated Battery Type Rechargeable Type Of Sensing Element Load Cell Warranty In Years 1 Tare Provision Manual Number Of Display Single Type Of Electronic Weighing Machine Electronic Infant Weighing Scale Resolution(Gms) 10 G Dc Operating Voltage In Volts 6 Volt Power Supply Single Phasepan/ Platform Size 550 Mm X 300 Mm , Weighing Scale Bis Marked Yes Conformity To Indian Standrad, Is:9281-3 (1981) Part I,Ii, Iii & Part Iv (Latest) Yes Rated Load/ Capacity(Kg) 150 Kg Battery Type Non-Rechargeable Tare Provision Automatic Internal Calibration True Backup Time(Hour) 10 Display Led Power Requirement Battery Operated Type Of Electronic Weighing Machine Electronic Personal Weighing Scale Warranty In Years 1 Number Of Display Single Speed Of Measurement 5 Second Dc Operating Voltage In Volts 6 Volt Power Supply Single Phase Resolution(Gms) 50 Gm Class Type Class-Iii Battery Backup True Type Of Sensing Element Load Cell Pan/ Platform Size 300 Mm X 300 Mm , First Aid Box Dressing Kit Is A Blister Pack With Rigid 3 Chamber Tray Made Of Hard Film Of Min 500 Micron Thicknesses To Provide The Strength While Being Used As A Container The Other Side Should Be Packed With A Medical Grade Paper, With The Thermal Sealing Min 7 Mm Or More As Per International Standard In Easily Peelable Pouch Yes Capacity 30 Milliliter Sterlity Of The Ready To Use Kit Sterile Utility Single Use - Disposable Items In The Kit No Of Gauze Of Different Sizes, 12 Ply, British Pharmacopoeia 17 Type, With All Margins Infolded So That No Loose Thread Is Visible On The Edges 5 No Of Gauze Balls Folded Nicely By Machines Without Any Loose Fibre 5 No Double Teeth Tweezer Made Of Fibre Glass And Polypropylene To Ensure The Adequate Strength In Holding The Articles 1 No Of Non Woven Sheets Of Different Sizes With Excellent Liquid Barrier Properties 1 No Of Dressing Pads Of Different Sizes Highly Absorbable Inner Cellulose Layer Completely Sealed In Nonwoven Covering To Hold The Liquid Inside The Pad And Avoid Seepage 1 No Of White Hand Towels, Made Of Wood Pulp Paper , Tds Meter Type Microprocessor Based Display Led / Lcd / Touch Screen, 3 Digits Calibration Up To 3 Points With Auto Buffer Ph Range (Ph) 0.00 To 14.00 Accuracy (Ph) +- 0.05 Corrosion Resistant Yes Power Requirements 230 V +- 10, 50 Hz Ac Modes Ph Mv- C Parallel Temperature Indication Yes Temperature Compensation Type Automatic Temperature Accuracy (Degree C) +- 0.3 Temperature Compensation Range (Degree C) 0 To 100 Resolution (Ph) 0.01 Operating Humidity: Rh In (%) 0 Operating Temperature (Degree C) -1 , Click Scanner Document Book Scanner Type Table Top (Without Computer And Display Screen) Technology Digital Camera Scanning Image Sensor Chip Ccd Embedded Pc Configuration If Applicable No Size Of Touch Screen Diagonally , If Applicable (Cm) No Glass Plate To Provide Flat Images Not Available If Available, Shape Of Glass Plate Flat Movement Of Glass Plate Manual Number Of Digital Cameras 1 Scan Area (Book Size When Open) A3 Maximum Book Thickness (Mm) 125 Optical Resolution (Dpi) 200 Scan Speed (Sec Per Scan) 1 Processing Time / Cycle Time (Scanning + Image Processing + Storage) (Seconds) 10 Buffer Memory (Mb) 8 Light Source Na Scan Mode (Colour Format) Colour / Black & White / Gray Scale Optical Zoom No Book Holder / Cradle Flat Bed,Manually Adjustable V-Shaped Cradle,Motorized V-Shaped Cradle,Inverted V-Shaped Glass Platen,Folder Mode Book Position During Scanning Face-Down On Flat Bed With Book Edge Working Mode (Page Turning) Manual Scanner Inter Face: (Computer Connection To Scanner Nil Network Interface (Gigabit Fast Ethernet With Tcp/Ip) No Applications Programming Interface (Api) Nil Output Formats Nil Supported Operating Systems Window 10 Image Processing Abilities Nil Overall Dimensions (Lxwxh)(Mm X Mm X Mm) 100X1000 Net Weight (Kg) 1 Max Power Requirements (Watt ) 60 Operating Temperature (Degree C) 45 Operating Humidity (% Rh) 42 Availability Of Test Reports From Central Govt/Nabl/Ilac Accredited Lab Showing Conformity To The Specifications (Test Reports Are To Be Furnished When Demanded By Buyer) Yes If Yes,Test Report Number Na If Yes,Test Report Date Na If Yes,Name Of Test Lab Na If Yes,Address Of The Test Lab Na Free Installation, Commissioning And Demonstration Yes On Site Oem Warranty (Year) 1 , All In One Printer =Minimum Technical Specification Machine Type Mono Laser All-In-One Available Functions Print, Copy And Scan Printer Print Speed Up To 18 Ppm (A4) Printing Method Monochrome Laser Beam Printing Print Quality Up To 1200 X 600 Dpi With Automatic Image Refinement Print Resolution 600 X 400 Dpi First Print Out Time 7.8 Secs Printer Languages Ufrii-Lt Print Margins 5 Mm-Top, 6 Mm- Bottom, 5 Mm-Left And Right Toner Saver Mode Yes Copier Copy Speed Up To 18 Ppm (A4) First Copy Output Time (Fcot) Approx. 12 Seconds Or Less Copy Resolution Up To 600 X 600 Dpi Copy Modes Text, Text/Photo, Text/Photo+, Photo Multiple Copy Up To 9 Copies Reduction / Enlargement 50-200% In 10% Increments Toner Saver Mode No Other Features 2 On 1, Id Card Copy Scanner Type Colour Scan Resolution Optical: Up To 600 X 600 Dpi Enhanced: Up To 9600 X 9600 Dpi Colour Scanning Depth 24 Bit/24 Bit (Input/Output) Greyscales 256 Levels Compatibility Twain, Wia Max. Scan Width 216 Mm Media Handling Scanner Type Flatbed Paper Input (Standard) 150-Sheet Tray Paper Output 100-Sheet Media Types Plain Paper, Heavy Paper, Recycled Paper, Transparency, Label, Envelope, Index Card Media Sizes Tray: A4, B5, A5, Executive, Envelope (Com10, Monarch, Dl, B5, C5), Ltr, Lgl, Statement, Custom Sizes: Width 76 X 216 Mm; Length 127 X 356 Mm. Media Weights Tray: 60 To 163 G/M² Interface & Software Interface Type Usb 2.0 Hi-Speed Operating System Compatibility Windows 7/2000/ Xp/ Vista Mac Os X Version 10.4.9 - 10.7.X¹linux² Software And Printer Management Scanning Tolls General Features Duty Cycle Max. 8,000 Pages Per Month¹ Warm-Up Time Approx. 10 Seconds From Power On Memory64 Mb Control Panel 1 Digit Led Operating Environment Temperature: 10 To 30ºc (50 To 86ºf) Humidity: 20 To 80% Rh (No Condensation) Power Source 220-240 V (±10%), 50/60 Hz (±2 Hz) Power Consumption Maximum: Approx. 960W Active: Approx. 450W Sleep Mode: Approx. 1.4 W Typical Electricity Consumption (Tec): 0.6 Kwh Noise Levels Sound Power Active: 65.3Db Or Less, Standby: 43.0Db Or Less Sound Pressure Active: 50.4Db, Standby: Inaudible Consumables Cartridges Cartridge 725 (1,600 Pages¹)² , Bio Metric Attendance Recorder Machine Specification Type Embedded Linux Based Biometic Attendance System Screen Size (Inch) 3 = N 5 Screen Resolution (Pixels) 800 X 480 Processor Speed (Mhz) 800 Ram (Gb) 1 Internal Storage (Gb) 4 Usb Port (Numbers) 1 Micro Usb Port Yes Battery Back Up Yes Network Connectivity Lan(Ethernet) Interface Only Mifare Card Support Yes Gprs Yes Internal Speakers Yes Queue Throughput (Number Of People To Mark Attendance Within One Minute) (Number) 20 Stqc Certified Biometric Identification Device Single Fingerprint Scanner Operational Endurance 24 X 7 Device Casing Material Polycarbonate Casing Thickness (Mm) 157 Ingress Protection Ip 65 Api/Sdk Stqc Uidai Certified Register Device (Copy Of The Certificate To Be Furnished , If Demanded By The Buyer) Yes Finger Placement The Fingerprint Scanner Should Be Ergonomically Placed To Support Ease Of Usage For Biometric Attendance In Standing Posture Of The User Drop Test Compliance For Casing From A Height Of 1 Meters No Drop Test Compliance For Casing From A Height Of 2 Meters No Separate Charging Non Usb Port Availabilty With Ac Adaptor Yes Rohs Compliant Certificate Yes Bis Under Crs Of Meity Yes Bis Registration Number Na Type Test Certificate Covering All Parameters And Environmental Tests From Stqc Certified Lab No If Yes ,Ttc Number And Date Na If Yes ,Name Of The Lab Na If Yes ,Address Of The Lab Na On Site Oem Warranty 1 , Steel Almarih /Kapat Without Lockers Conformity To Indian Standard Is:3312 Latest True No Of Shelves (Nos) 4 Type Of Shelves Fixed Locker Provided False Cloth Hanging Provision In The Almirah False Number Of Doors (Nos) 2 Door Stiffner Upto Full Door Height Provided With The Almirah Doors True Umber Of Hinges With Each Door (Nos) 3 Construction Welded Lock Three Way Bolting Device Controlled By Lock Material Material M.S Sheet Conforming To Commercial Quality Cr- 1,Grade 340 Of Is 513:2008 (Reaffirmed 2013)(Fifth Revision)Amdt. No.1 Material Of Almirah Doors M S Sheet Sheet Thickness Of Locker 0.8 Mm Sheet Thickness Of Door In Mm 0.8 Mm (Minimum) Sheet Thickness Of Sides,Back , Top And Bottom 0.8 Mm (Minimum) Sheet Thickness Of Shelves 0.6 Mm Sheet Thickness Of Pedestal In Mm 0.8 Mm (Minimum) Material Of Lock Brass And Steel Finish Material Of Keys Steel Dimension Height (Without Pedestal) (In Mm) (+/- 10 Mm) 1855 Width In Mm (± 7 Mm) 910 Millimeter Depth In Mm (±5 Mm) 430 Millimeter Inside Height Of Locker In Mm (± 5 Mm) N.A Inside Width Of Locker I Mm (±5 Mm) 910 Mm Inside Depth Of Locker In Mm (±5 Mm) 430 Mm Width Of Stiffner In Mm (±5 Mm) 115 Mm Thickness Of Ms Sheet Of Stiffner (In Mm) 0.6 Mm Stiffened Pedestal Height In Mm (±2 Mm) 120 Pedestal Width In Mm (±2 Mm) 70 Colour & Finish Finish Synthetic Enamel Colour Of Paint As Per Work Order Packing: Gutta Packing , 80 Kg Home Gym Indoor Package:(Rubber Plates) Of 20 In 1 Bench With 3Ft Curl And 5Ft Plain Rod, Gym Accessories And Dumbbell Rods 80Kg Pure Rubber, Weight 10Kg X 4Pcs 5Kg X 4Pcs 3Kg X 4Pcs 2Kg X 4Pcs 20 In 1 Bench (Features: Incline, Decline, Flat, Leg Curl And Leg Extension, Chest Press/Butterfly, Lat Pull Down, Ground Pulley, And Dips, Arm Curl) 3Ft Curl Rod And 5 Ft (25Mm) Plain Rod One Pair Of Dumbbell Rods, Hand Gripper, Hand Gloves And Skipping Rope , Weight Lifting Bar -4 Feet Utility Men Mass Of Bars 20 Kg ( Men ) Length Of Bar 1220Mm ( Men ) Diameter Of Grip Section 28 Mm ( Men ) Length Of Each Sleeve 41.5 Cm ( Men ) Rim Diameter 7.3 To 8.0 Cm ( Men ) Diameter Of Bar 28 Mm ( Men ) Knurling In Grip Section 2 Grip Sections Of 44.5 Cm With Nonknurled 0.5 Cm Strip 19.5 Cm From Inner Sleeve With Centre Knurling Of 12 Cm Long ( Men , Weight Lifting Bar -5 Feet Utility Men Mass Of Bars 20 Kg ( Men )Length Of Bar 1524Mm ( Men )Diameter Of Grip Section 28 Mm ( Men ) Length Of Each Sleeve 41.5 Cm ( Men ) Rim Diameter 7.3 To 8.0 Cm ( Men ) Diameter Of Bar 28 Mm ( Men ) Knurling In Grip Section 2 Grip Sections Of 44.5 Cm With Nonknurled 0.5 Cm Strip 19.5 Cm From Inner Sleeve With Centre Knurling Of 12 Cm Long ( Men , Weight Lifting Bar 7 Feet Utility Men Mass Of Bars 20 Kg ( Men ) Length Of Bar 2200Mm ( Men ) Diameter Of Grip Section 28 Mm ( Men ) Length Of Each Sleeve 41.5 Cm ( Men ) Rim Diameter 7.3 To 8.0 Cm ( Men ) Diameter Of Bar 28 Mm ( Men ) Knurling In Grip Section 2 Grip Sections Of 44.5 Cm With Nonknurled 0.5 Cm Strip 19.5 Cm From Inner Sleeve With Centre Knurling Of 12 Cm Long ( Men , Dumbels Rod 1Foot Heavy Duty Workout Bars/Dumbbell Rods Length:-14Inches Material:-Steel Rod With Plastic Firm Hold Grip Nickel Electroplated To Protect It From Corrosion 14Inches Rods X2pcs. + Locks To Hold Plates 4Pcs , Dumbels Plate 2.5Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainers Best Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dumbels Plate 5 Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainersbest Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dumbels Plate 7.5 Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainers Best Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dumbels Plate 10Durable & Robust Technology Plates: The Plates Are Made Up Of Pvc Plastics Material Embedded With Solid Concrete, Suitable For Universal Gym Exercises Enabled Withhugebearingcapacityandrobusttechnology Pvc Coating: The One-Piece High Quality Inspected, A Tough Premium Pvc Casing Covers Each-Plate Ergonomic Design: Designed With Latest Manufacturing Tech. To Give Uniform And Perfect Finish To Each & Every Weight Plate Ideal For Home Gym: A Perfect Choice For Home Fitness Daily Regime And Workout Sessions With Family. Best In Class Product For Gym Owners, Office Going Fitness Freaks And Trainers Best Suited For Complete Muscle Workout: Premium International Standard Quality Pvc Weight Plates That Are Used In Exercises For Building Triceps, Biceps, & For Arm Muscles While Maintaining A Complete Balance Of Power, Strength And Control , Dips Stand 1Par X450 Easy-Dismantle, Convenient And Portable, Foam Handles Suitable For Power Push Up Training With Daily Use You Can Achieve To Narrow The Abdomen, Hips, Chest While Strengthening Your Upper Abdomen, Chest Shoulder And Triceps, Biceps Suitable For Home Use And Travelling Taking Comes In Compact Design And Ergonomic Handles For A Comfortable And Secure Grip , Bench Press Multy Purpose 6 Versatile Positions Flat, Incline And Decline (F.I.D Bench) Strong Tubular Metal Frame Makes This Machine Extra Sturdy Chip Resistant Frame Coated With Epoxy Powder Easy Self Assembly Required (Full Manual Included) , Garbagecar/Ghantagadi Type Of E Cart Fully Electric, Battery Operated Motor Driven For Carrying Bins Colour Of E Cart Green And Bluethe E Cart Must Fabricated From Good Quality Steel Properly Painted To Avoid Rusting For More Than 5 Years, Yes Name And Grade Of Steel From Which E Cart Body Framed Crca Steel Kerb Weight Of E- Cart (Kg) 370 Kilogram Garbage Carrying Capacity (Kg) 310 Kilogram Run Distance (For A Full Charge Of Battery , To Be Tested With Full Load At Maximum Ais-040 )) (Km) 120 Number Of Bins 2 Capacity Of Individual Bins In Litres (Ltrs) 249 Liter Type Of Chassis For E Cart Monocoque Pressed Section Ground Clearance As Per Is : 9435 (Mm) 180 Wheel Base (Mm) 935 Millimeter Turning Radius (Mm) 1698 Millimeter Power Transmission From Motor Shaft To Wheels Direct Mounting Please Specify The Mechanical Mechanism Otherwise Put Na Na Type Of Battery As Per Ais-048 Lead Acid , Ev Grade , Tubular Deep Discharge Capacity Of The Battery Approved By Icat/Arai (Ah) 100 Battery Voltage ,Nominal (Volts) 48V Maximum Overall Dimensions Of The Battery ( L X Wx H ) (Mm3) 400X170x210 Nominal Filled Weight Of The Battery (Kg) 29.7 Kilogram Motor Controller ( Must Suitable For Starting, Accelerating, Ecelerating, Driving , And Stopping Of E Cart Availabile Battery Charger 220/230 V Nominal Input Voltage , High Efficiency Type Charging Current (A) 15 Type Of Motor Brushless Dc Motor Motor Output Power ,48V/60V At Full Load (Watt) 1209 Overall Efficiency Of The E Cart ( To Be Tested At Full Load With Maximum Speed As Per Concerned Ais Standards (%) 85 Gradeability Of E-Cart , ( To Be Tested At Full Procedure As Per Ais -003 Load (Degree) 75 Certification Vehicle Certification Arai If Vehicle Certification From Others Agency ,Name Of The Agency Otherwise Put Na Arai Vehicle Certification Number And Date Aalb 0283 1 Sep 2016 Constructional Seating Facility For Driver Only Length Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 1.69 Width Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct, 2014 (Meters) 0.987 Height Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 1.695 Dimensions Of The Cabin Provided For Bins (Mm X Mm X Mm) (Mm3) 1328X986x356 Size Of Front Tyre (Mm) 3.00-12 Size Of Rear Tyre 3.00-12 Brake Type (Front) Drum Brake Type ( Rear ) Drum Suspension System (Front) Shock Absorbers With Compression Spring Suspension System ( Rear ) Leaf Spring And Hydrolic Reverse Gear Facility Yes The Mounting Of Batteries Yes Vehicle Lighting System Lcd Based Instrument Panel Containing Speedometer And Battery Charging Indicator Yes Glass Windshield With Wiper Motor As Approved By Icat/Arai Yes Battery Make As Per Ais :048:2009 , Kachara Gadi /Hand Trolley (Collecting Garbage) Collection Conforming To Indian Standard Is 4184: 1967: Latest For Two Wheels Type Wheel Barrowproduct Isi Marked No Cm/L Number Na Nominal Capacity Of Wheel Barrow 110 Liters (Two Wheel Type Wheel Barrow) Material Used For Manufacture Steel Sheets (Steel Sheets Shall Be Not Less Than 1.60 Mm In Thickness, And Shall Conform To Is : 1079 ) Type Of Chassis Frame Any Other Suitable Steel Section, Such As Flat Of Size 30 X 6 Mm Wheel Material Ms With Solid Rubber Tyre Minimum Diameter Of The Axle / Spindle (Mm) 25Minimum Nominal Width Of Tyre (Mm) 50 Minimum Diameter Of The Wheel (Mm) 300 Minimum Bearing Length Of Axle/Spindle 25 Mm At Each End Type Of Bearing / Bush Cast Iron Maximum Clearance Between The Bearing And Axle (Mm) 0.5 Finish Of Metal Parts Other Finish Finish Other Than Two Coats Of Black Bituminous Paint And Galvanised Yes Availability Of Test Report From Nabl/ Ilac Accredited Or Central Government Lab To Prove Conformity Of Products To The Specification. Yes , Garden Bench Governing Specification Surface Mount Reinforcement Bench Conforming To Rdso Specn. (Item No. 172020 Of Ussor) Design Conforming To Drawing No. Rdso/Wks/2014/3 Date : 07.11.2014 Technique Compaction Technique And With Reinforcement Conforming To Govng. Specn. Hair Basisscope Of Supply Scope Of Supply Includes Erection And Installation Of Precast Concrete Reinforce Benches With Backrest Construction Of Bench With Concrete Mix Design - Reinforcement Steel - Connections - And Paint Members Of Bench Reinforced Cement Concrete Base Support And Planks Installation Each Seating Plank ( Bottom ) Of Bench Bolted With Leg By Help Of 12 Mm Dia. X 65 Mm Length Galvanized Steel Countersunk Bolts With Eva Washer - Backrest Planks Fitted With Half Threaded Carriage Bolts And Nuts Of Size 165 Mm X 8 Mm Dia With Eva & Steel Washer Material Concrete Mix Design M-30 Grade Concrete Mix In Accordance With Is : 10269/Latest In Gray Cement By Using Vibro - Compaction Technique And With Reinforcement As Detailed In Govng. Specn. Reinforcement Steel Tmt Reinforcement Bars Conforming To Is : 1786/Latest Of Dia 10 Mm Used As Main Reinforcement Bar And 4 Mm Dia Mild Steel Bars Used As Stirrups As Per Drawing Tirrups Details 10 Nos. - 4 Mm Dia Bar @ 150 Mm C/C Main Reinforcement Bar 4 Nos. - 10 Mm Dia Bar Adequate Clean Concrete Cover 15 Mm Minimum Material For Connecting Seating Plank With Leg 12 Mm Dia X 65 Mm Long Galvanized Steel Countersunk Bolts Confmg. To Is : 1367 / Latest With Eva Washer Material For Connecting Back Rest Plank With Leg Half Threaded Carriage Bolts And Nuts Of Size 165 Mm Length X 8 Mm Dia With Eva And Steel Reinforced Cement Concrete Planks Using M-30 Grade Gray Cement Mixed With 3 % Red Pigment Dimension , Inverter With Battry Inverter Governing Specification Generally Conforming To Is:13314 Rating In Kva & Min. Vah Capacity Of Battery 2 Kva/8640 Vah Technology Mosfet-Pwm Energy Star Rating 5 Star Trolley With Trolley Type Of Battery Tubular Battery Confirming To Is:13369 Backup Time (Minutes) Minimum 180 Minutes Constructional Thickness Of Sheet For Trolley (In Mm) Minimum 1.2 Trolley Material Crca Steel Type Of Enclosure Crca Steel Thickness Of Sheet For Enclosure ( In Mm) Minimum 1.2 Inverter Shall Have By Pass Facility Yes Functional Total Harmonic Distortion /=5% Input Single Phase Sine Wave(120 To 260 V) Output Single Phase Sine Wave 230 V Inverter Efficiency (%) /=87% Overload Time (In Minutes) /=10 Overload Of Rated Load (In %) /=10 Protection Battery Cut-Off Voltage To Protect From Overdischarge (In Volt) 10.5 Degree Of Protection Ip 21 Metering And Indications The Inverters Shall Be Provided With Output Voltage And Current Meters Conforming To Is 2419 : 1979 And Of An Accuracy Class Not Inferior To 2.5 In Accordance With Is 1248 : 1983 Yes Certifications Availability Of The Type Test Report From Central Govt. /Nabl/Ilac , Types Of Lead Acid Of Battery Stationary Cells And Batteries, Lead Acid Type (With Tubular Positive Plates) Conforming To Is:1651/1991 Nominal Voltage Of Battery (Volts) 12.0 Volt Material Of Container Polypropylene Batrry 150 Ted Capacity At C20 Discharge (Ah) 200 Warranty (Years) 1 Year Battery Condition Charged Constructional Dimensions (L X W X H) (Mm X Mm X Mm) As Per Relevant Is Specifications Volume Of Electrolyte (Ml) 5000 Weight Of Dry Battery (Kg) Shall Be As Per Relevant Is: Specn., Corresponding Ah Yes. No.Of Cells Per Battery (No.) 6 Cells For 12 Volt Battery , Air Cooler Large General Features For Rooms Up To (Mt.3 *) 142 Engg. Plastic (Blower / Fan) Double Blower Tank Capacity (Up To Brim- L) 110 Remote Control N/A Auto Louver Movement Yes Cool Flow Dispenser Yes Empty Tank Alarm Yes Cooling Media Hybrid Mosquito Repellent Yes Electronic Humidity Control Yes Air Throw Distance (Mt) 7 / 24 Natural Mode Yes Sleep Mode Yes Off Timer Yes Fully Closable Louver Yes Automatic Horizontal Louver Yes Automatic Vertical Louver Yes Ergonomic Handle Of Easy Movement Yes Easy Removable Cooling Pads Yes Voice Assist Yn/A I-Pure Technology Yes Wattage 230V / 50Hz 205 Product Dimensions (Mm) Length 763 Breadth 430 Height 1235 Carton Dimensions (Mm) Length 810 Breadth 450 Height 1275 I-Pure Technology Smell Filter Yes Bacterial Filter Yes Allergy Filter Yes Uvc Germicidal Yes Pm2.5 Wash Filter Yes , Air Cooler Medium General Features For Rooms Up To (Mt.3 *) 127 Engg. Plastic (Blower / Fan) Fan Blower/Fan Diameter (Mm) 358 Speed Control 3 Tank Capacity (Up To Brim- L) 70 Remote Control No Auto Louver Movement Yes Cool Flow Dispenser Yes Empty Tank Alarm No Cooling Media Honeycomb I-Pure Technology Yes Wattage 230V / 50Hz 205 220V / 60Hz 350 110V / 60Hz 365 Product Dimensions (Mm) Length 635 Breadth 500 Height 1125 Carton Dimensions (Mm) Length 600 Breadth 475 Height 1175 Product Weight (Kgs) 14.9 Product Weight Incl. (Pack) (Kgs) 18.8 No Of Units Per 40Ft Container (Hc) 188 I-Pure Technology Smell Filter Yes Bacterial Filter Yes Allergy Filter Yespm2.5 Wash Filter Yes , Air Cooler Small General Features For Rooms Up To (Mt.3 *) 71 Engg. Plastic (Blower / Fan) Double Blower Tank Capacity (Up To Brim- L) 55 Auto Louver Movement Yes Cool Flow Dispenser Yes Cooling Media Aspen Air Throw Distance (Mt) 7 / 24 Automatic Vertical Louver Yes Ergonomic Handle Of Easy Movement Yes Easy Removable Cooling Pads Yes Wattage 230V / 50Hz 205 Product Dimensions (Mm) Length 763 Breadth 430 Height 970 Carton Dimensions (Mm) Length 810 Breadth 450 Height 1010 , Air Condition 1 Ton Split Inverter Ac Capacity (Watts) 3440 Energy Efficiency (Iseer) 5.2 Moisture Removal (L/Hr) No Noise Level (Indoor High/Low) No Compressor Type Invertor Power Consumption 830 Watts Voltage No Auto Restart Yes On Timer Yes Off Timer Yes Dehumidification No Sleep Yes Swing Yes Remote Control Yes (Lcd) Indicators Yes Indoor Unit Size (W X D X H) Cm 84.5 X 18.0 X 27.5 Outdoor Unit Size (W X D X H) Cm 82 X 30 X 54 Indoor Unit Weight (Kg) 12.5 Outdoor Unit Weight (Kg) 33 Warranty 1 Year On Functioning And 10 Year On Compressor 5 Year Condenser Other Features R290 Greenest Refrigerant Auto Clean/Blow Function Memory Function Auto Mode Silver Ion Filter Turbo Mode Dry Mode Sleep Mode Auto Restart 10 Year Compressor Warranty & 5 Year Condenser Warranty , Air Condition 1.5 Ton Split Inverter Ac Capacity (Watts) 5000 Energy Efficiency (Iseer) 4.9 Moisture Removal (L/Hr) No Noise Level (Indoor High/Low) No Compressor Type Invertor Power Consumption 1350 Watts Voltage No Auto Restart Yes On Timer Yes Off Timer Yes Dehumidification No Sleep Yes Swing Yes Remote Control Yes (Lcd) Indicators Yes Indoor Unit Size (W X D X H) Cm 94 X 20 X 29.8 Outdoor Unit Size (W X D X H) Cm 85 X 40 X 59 Indoor Unit Weight (Kg) 16 Outdoor Unit Weight (Kg) 39 Warranty 1 Year On Functioning ,10 Years Compressor Warranty & 5 Years Condenser Warranty Other Features R290 Greenest Refrigerant Auto Clean/Blow Function Memory Function Auto Mode Silver Ion Filter Turbo Mode Dry Mode Sleep Mode Auto Restart 10 Year Compressor Warranty & 5 Year Condenser Warranty , Air Condition 2 Ton Split Inverter Ac Capacity: 2 Ton Rating: 5 Star Iseer: 4.9 Capacity: 2 Ton(S) Bee Rating: 5 Star Ac Type: Split Usage: Office Warranty: 3 Year(S) Features: 7 Years Compressor Warranty, Auto Mode, Copper Condenser And Connecting Pipe, Dry Mode, Environment-Friendly R410a Efrigerant Timers: Yes Auto Restart: Yes Sleep Mode: Yes Remote Control: Yes Active Carbon Deodoriser: Yes Catechin Filter: Yes Color: White Dimension: 800X300x690 Weight: 45 Cooling Capacity (Watts): 6155 W Power Input (Watts): 1784 W Copper Condenser 7 Years Compressor Warranty Eco-Friendly Refrigerant Other Features R290 Greenest Refrigerant Auto Clean/Blow Function Memory Function Auto Mode Silver Ion Filter Turbo Mode Dry Mode Sleep Mode Auto Restart 10 Year Compressor Warranty & 5 Year Condenser Warranty , Color Printer Printer Type - Ink Tank; Functionality - All-In-One (Print, Scan, Copy) , Scanner Type - Flatbed; Printer Output - Colour Connectivity - Usb This Printer Comes With 2 Extra Bottles Black Ink In The Box, In Addition To 1 Each Of Cyan, Yellow, Magenta And Black Pages Per Minute - 33 Pages (Black & White), 15 Pages (Colour) ; Cost Per Page - 7 Paise (Black & White), 18 Paise (Colour) - As Per Iso Standards Ideal Usage - Home And Small Office, Regular / Heavy Usage (More Than 300 Pages Per Month) Page Size Supported - A4, A5, A6, B5, C6, Dl ; Duplex Print - Manual ; Print Resolution - 5760 X 1440 Compatible Ink Bottle - T6641 (Black), T6642 (Cyan), T6643 (Magenta), T6644 (Yellow) ; Page Yield - 4500 Pages (Black & White), 7500 Pages (Colour) Warranty - 1 Year , Supplying Installing Testing & Commissioning Solar Street Light Pole Comparing Of 9 W Led Fitting 12 V Min Ah Maintanance Free Lithium Battry Box Weatherproof Mounted On 75/80 Mm Brackets Foundation Earthing And Nessasaery Accesaries Complite As Per Specification No - Esd-Sol-Stl(4-3-11) , Providing Ms Boxex With Locking Arren- Gement Fitting Etc , Providing And Fixing Of Retro-Reflectorised Informatary Sign Board Rectangular/Square Meter Made Out Of 2Mm Alluminium Sheet Bonded With White Reflective Sheeting Of Class B , Refrigerator Small Number Of Doors Single Door 5 Star Ratings Refrigerator Capacity (Total) 99 L Defrosting Type Direct Cool Shelf Type Wire Number Of Shelves 2 Voltage Range 140-260V Hfc And Cfc Free Yes Color Wine Red Dimension (Mm) 850 X 487 X 568 Warranty 10 Year Compressor Warranty Other Features Interior Light: Bulb Anti-B Technology: Yes 100% Environment Friendly Low Starting Voltage Uninterrupted Cooling Runs On Home Inverter 24 Hour Freshness , Refrigerator Medium Number Of Doors Single Door 5 Star Ratings Refrigerator Capacity (Total) 181 L Defrosting Type Direct Cool Shelf Type Wire Number Of Shelves 2 Voltage Range 140-260V Hfc And Cfc Free Yes Color Candy Wine Dimension (Mm) 1128 X 541 X 661 Warranty 10 Years Compressor Warranty Other Features Door Lock 2.5L Aqua Space In Door Shelf Interior Light: Bulb Anti-B Technology: Yes 100% Environment Friendly Low Starting Voltage Uninterrupted Cooling Runs On Home Inverter 24 Hour Freshness , Refrigerator High Number Of Doors Single Doornumber Of Doors Single Door 5 Star Ratings Refrigerator Capacity (Total) 210 L Defrosting Type Direct Cool Shelf Type Toughened Glass Number Of Shelves 2 Voltage Range 110-260V Hfc And Cfc Free Yes Color Pearl Wine Dimension (Mm) 1341 X 577 X 667 Warranty 10 Years Compressor Warranty Other Features Max Savings With Inverter Technology Runs On Home Inverter 24 Hour Freshness , Sewing Machines Specification Indian Standrad For Household Sewing Machines Is:1610 Latest Certification Isi Marked Yes Cm/L No And Date (If Yes) 23112018 Sewing Mechanism Design Single Needle Design For Producing Two Thread Lock Stitch. Reverse Stitch Mechanism Yes Thread Spool Pin Yes Driving Arrangement Driving Arrangements Foot Operated Machine Electric Motor Conforming To Is 996 Latest For Motor Driven Machine Yes Starting Switch For Electic Motor Yes Speed Controller For Electric Motor Yes Pulley And Belt For Electric Motor Yes Safety Requirements Connforming To Is302(Part I)Latest For Electrical Equipment Used Yes Table/ Base/ Stand Table/ Base/ Stand Integral Part Of Sewingmachine Yes Wooden Table Or Base Conforming To Is 12789 Latest Yes Stand(If Supplied) Conforming To Is 12740 Latest Yes Performance Sewing Machine Accuracy Requirement Conforming To Is 7491 Yes Sewing Requirements Conforming To Is 7492 Yes Durability Requirements Onforming To Is 7493 Yes Other Requirements Nickel Plus Chromium Plated Parts Conforming To Service Condition 1 With Designation Fe/Ni/0Bcr R Of Is 1068 Yes Lubrication Orifices Yes An Automatic Thread Tension Release Yes Sewing Machines Components Conforming To Is Pecifications At Annex B To Is 1610 Latest Yes Accessories Supplied With Each Machine In Service Ox(Interchangeable With Machine Of The Same Make And Model) A) One Oil Bottle Filled With 50Ml Oil Min B) Two Screw Drivers (Engineering),One Large And One Small C)Three Bobbins D)Three Needles E) One Embroidery Plate (Where Drop Feed Arrangement Is Not Provided) F) A Booklet Containing Manufacturer S Operating Instruction And Technical Characteristics G) Spool Pin Pad Or Felt Washers (4 Nos) H) Needle Threader Yes Packing Packing In Accordance With Is 8355 Yes Warranty (Years) 1 , Sanitary Napkin Disposal Machine Specification Type Wall Mountable Purpose Burn Used Sanitary Napkins To Sterile Ash And Stop Automaticallycolor Elephant Greyoperation Mode Electronically Operated, Fully Automatic Loading Type Front Loading Stand Provided No Number Of Chambers Two Trap Door Available Yes All Ms Parts Powder Coated Yes Spare Parts Should Be Available For Minimum 5 Years From Date Of Supply Yes All Electrical Parts Are Isi Marked Yes Dimensions Of Main Unit Thickness Of Thermal Insulation Material (Mm) 40 Millimeter Thickness Of Ms/Ss Sheet Of Housing Cabinet (External) (Mm) 1.2 Millimeter Thickness Of Ms/Ss Sheet Of Burning Chamber (Internal) (Mm) (Min) 5 Millimeter Machine Width(Mm) 200-300 Machine Depth (Mm) 201-300 Machine Hight(Mm) 200-500 Machine Weight(Kg) 16-30 Door Width(Mm) 101-150 Door Height(Mm) 101-150 Thickness Of Door (Mm) 25 Millimeter Internal/Burning Chamber Shape Vertical Cylindrical Flexible Emission Outlet Pipe Dia (Mm) 25 Millimeter Detachable Ash Tray Length (Mm) 100-150 Detachable Ash Tray Width (Mm) 151-200 Detachable Ash Tray Height (Mm) 5-15 Stand Height (Mm) 500 Millimeter Stand Width (Mm) 200-300 Stand Depth (Mm) 201-300 Material Of Machine Unit Material Of Housing Cabinet (External) Mild Steel(Crca) Sheet Material Of Burning Chamber (Internal) Mild Steel(Crca) Sheet Finish Of Ms Parts Of Cabinet Epoxy Anti Rust Proof Painting For Superior Finish Material Of Thermal Insulation High Density Ceramic Fiber Sheet Constructional Features Thermal Insulation Of Burning Chamber Housed In Outer Chamber Yes Burning Chamber Tray Provided Yes Emission Outlet Pipe Location Top Of Machine Means Of Connecting The Unit Outlet With Flue Gas Emission Pipe Flanged Type Of Door Lock Provided Latch Lock Control & Functional Features Temperature Indicator Provided Yes Timer Provided Yes Auto Cut-Off Temperature Display Yes Digital Display To See Actual And Set Temperature Yes Minimum Burning Temperature (Degree C) 800 Burning Capacity Per Day (Number Of Napkins) 200-500 Burning Capacity At A Time (Number Of Napkins) 1-15 Residue Ash Per Napkin (Gms) 1 Gram Burning Time Of Full Capacity Napkins/Pads (Minutes) 10 Minute Skin Temperature Of The Unit Under Operation (Deg C) 0-15 Installation, Training, Demonstration And Plumbing Included Yes Electrical And Safety Features Automatic Digital Controller For Time Yes Automatic Digital Controller For Temperature Yes Equipment On/Off Indicator Provided Yes Power Supply 230V +/-10%, 50Hz, Single Phase, Ac Supply Electrical Power Consumption(Watt) 500-1000 Minimum Length Of Power Chord To Be Supplied Along With Machine (Mtr) 2 Meter Type Of Heater Ceramic Heater Containing Coil Power Saver (Auto Power Cut-Off) Yes Safety Mcb Provided (16A To 30A) Yes Protection Against Electric Shock When Checked As Per Is:302-1/2008 Yes Minimum Insulation Resistance (Ir) At 500 Vdc (Mega Ohm) 2 Maximum Electrical Insulation And Leakage Current As Per Is:302-1/2008, (Ma) 0.21 Maximum Earthing Continuity Test When Tested As Per Is:302-1/2008 (Ohm) 0.1 Hv Test At 1000 V Rms For 1 Sec When Tested As Per Is:302-1/2008 No Reakdown Shall Occur During The Test Smoke Control Unit (Scu) Type Of Scu (Smoke Control Unit) Top Mounted Material Of Housing Of Smoke Control Unit (Scu) Mild Steel(Crca) Cabinetfinish Of Ms Parts Of Scu Cabinet Epoxy Anti Rust Proof Painting For Superior Finish Overall Height Of Scu (Mm) 300 Overall Width Of Scu (Mm) 301-500 Overall Depth Of Scu (Mm) 100-300 Number Of Chambers For Filteration Of Smoke Emission Two Both Carbon Control And Foul Odour Control Chambers For Filteration Of Smoke Emission Yes Number Of Filters In Carbon Control Chamber One Type Of Filters In Carbon Control Chamber Steel Mesh Filterr Number Of Filters In Odour Control Chamber One Type Of Filters In Odour Control Chamber Activated Carbon Filterblower Type Centrifugal, Direct Driven Blower Rpm 1800 Power Supply Of Spu 230V +/-10%, 50Hz, Single Phase, Ac Supplyminimum Length Of Flexible Emission Outlet Pipe To Be Supplied Along With Machine (Mtr) 3 Cost Of Additional Flexible Emission Outlet Pipe, If Required On Actuals To Be Paid By The User Yes Emission Standard For Smoke Conformity To Cpcb, Min Of Environment & Forests Standard Hazwams/30/2005-06 Yes Particulates (Half Hourly Average) (Mg/Nm3) (Max) 50 Hcl (Half Hourly Average) (Mg/Nm3) (Max) 50 So2 (Half Hourly Average) (Mg/Nm3) (Max) 200 Construction Of (Half Hourly Average) (Mg/Nm3) (Max) 100 Construction Of (Daily Average) (Mg/Nm3) (Max) 50 Total Organic Carbon (Half Hourly Average) (Mg/Nm3) (Max) 20 Hf (Half Hourly Average) (Mg/Nm3) (Max) 4 Nox (No And No2 Expressed As No2) (Half Hourly Average) (Mg/Nm3) (Max) 400 Total Dioxins And Furans ( 6 To 8 Hours Sampling Basis, Please Refer Guidelines For 17 Concerned Congeners For Toxic Equivalence Values To Arrive At Total Toxic Equivalence) (Ng Teq/Nm3) (Max) 0.1 Cd + Th + Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Hg And Its Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Sb+As+Pb+Cr+Co+Cu+Mn+Ni+V+Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.5 Loss On Ignition (Max) (% Dry Weight Of The Material) 5 Packing Packing Carton Box Marking And Instructions The Appliance Is Marked As Per Is:302-1/2008 Yes Certification Submission Of Test Report From Central Government /Nabl/Ilac Accredited Lab Specifically Containing Electrical & Electronic Parameters, Thermal Insulation Material Of Burning Chamber Etc In Addition To The Declared Specification Parameters At The Time Of Supply Yes Submission Test Report For Equipment For Compliance Of Flue Gas Emission And Ash Upon Combustion Of Sanitary Napkins/Pads To Central Pollotution Control Board (Cpcb) Norms From Nabl Accredited Lab At The Time Of Supply Yes Certification Available Eu-Cecertificate For Manufacturing Premises Available Iso Compliance Certificate Is To Be Furnished After Conducting Comprehensive Performance Test By The Supplier Yes Submission Of All The Certifications To The Buyer Along With Supplies Yesperformance Requirements Warranty (Yrs) 1 , Fully Automatic Coin Operated Sanitary Napkin Vending Machine -100 Pads Specification Sms Notification By Machine Yes Type Of Machine Automatic Type Of Fitting Wall Mountable Color Others Napkin Size For Loading Any Size Napkin Fold Trifoldoperating Features Coin Operated Multiple Coins Accepted Yes Number Of Napkins/Pads Provided/Loaded With The Vending Machine 4 Multiselection Of Napkin Type No Number Of Selection Options 1 Vending Option Vertical Accessibility For Free Vending Utility Service Na Type Of Loading Spiral Less Vending Napkin Individually Packed Yes Led Illumination Provided For Visibility Of Napkins In The Machine No Visibility Window No Pre-Programmable Facility Available Yes Maximum Storage Capacity (Nos)(Nos) 75-100 Digital Counter For Accounting No No Stock Message Display Available Yes Built-In Program For Automatic Coin Return/Reject System When There Is No Stock Or No Power Yes Built-In Program For Automatic Currency Block/Reject System When There Is No Stock Or No Power Yes Built-In Price Programming Software For Changing The Price Yessales Data Retrieval No Any Additional Built-In Features Available When There Is No Stock, Coin Will Not Be Accepted ,Shock Proof,Light Weight & Compact Design Functional Features Material Of The Outer Body Mild Steel(Ms)Type Of Battery Sealed Maintenance Free Lead Acid Built-In Charger No All Ms Parts Are Duly Painted By Powder Coating Mode Of Function Stand Alone Operating Power Source Electronic Input Power Supply 220V +/- 10%, 50Hz, Single Phase Ac Battery Backup Available No Battery Backup Time (Hrs) Na Power Consumption(Watt) 8 Dimensions Width (Mm) 200-400 Depth (Mm) 100-200 Height (Mm) 800-1000 Weight (Kg) 10-20 Thickness Of Ss/Ms Sheet (Mm) 1.2 Thickness Of Frp/Plastic Sheet (Mm) Na Warranty 0Ne Year , Sanitary Pads Specification Napkin / Pad Consists Of Outer Covering With Sufficient Number Of Channels For Leak Protection Yes Type Of Napkin Large Tabless Napkin / Pad Shall Have A Non-Absorbent Barrier On One Side Which Shall Have An Identifying Hread Or Marking Indicating Clearly The Side Of The Barrier Yes Adhesive Back Strip Yes Color Of Pad White Soft,Comfortable,Breathable,Odorless , Anti-Bacterial , Non-Allergic And Bio-Compatible,Bio-Degradable Yes Ph Of The Absorbent Material Of The Napkin As Per Is : 1390-1961 Yes Absorbency With Prescribed Fluid @50 Ml/Min Instead Of 30 Ml Of Cl 5 (1) Of Is : 5405/1980 (First Revision) Reaffirmed 2012, With Amendment 1, Without Leakage On Bottom And Sides Yes Disposability - Disposable Napkin /Pad With Covering Removed Shall Dis Integrate In The Water In Not More Than 5 Minutes When Immersed In 15 Litres Of Water And Stirred Yes Instructions Indicating Removal Of Non-Absorbent Barrier Before Flushing Of Napkin Yes Standard Conformity To Indian Standard Is: 5405-1980(Latest) Except For Absorbency And Size Yes Product Is Bis Marked No Cm/L No(If Product Is Isi Marked) 0 Dimensions Size Of Napkin (Length X Width X Thickness) (In Mm) (200+-10)X (75+-5) X (10 +-1.5) Weight Of Single Pad (In Grams) 9+-1 The Thickness Of The Pad Shall Be Average Of The Height Measured By Stacking 10 Complete Pads Yes Napkin / Pad Should Have Uniform Thickness Throughout Without Any Wrinkle Or Distortion Yes Material Material Of Inside Cover Rayon Absorbent Filler Material Cellulose Pulp Absorbent Filler Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material Yes The Covering Of The Absorbent Filler Shall Be Of A Good Quality Poly-Perforated Film Sleeve, Gauze Or Non-Woven Fabric With Sufficient Porosity To Permit The Assembled Pad To Meet The Absorbency Requirement Yes If Cotton Gauze Is Used For Covering Of The Absorbent Filler, It Shall Conform To Is 758-1975 Na Packing And Marking Primary Packing (No Of Pads In A Pack) 6 Type Of Primary Packing Polyethylene Bags Of Qualitative Material With Gsm 35-40 Printing On Primary Packing Include Logo In Four Colours Using Weather Proof Ink, Name, Manufacturers License No, Address, Length, Dimensions, Lot/Batch No, Date, Month And Year Of Manufacture, Date, Month And Year Of Expiry, Number Of Napkins, Advice For Storage And Any Other Printing Details Required By The Buyer As Per His Requirement Yes Secondary Packing Corrugated Box Of 5X120gsm Number Of Primary Packages In Secondary Package 125 Printing On Secondary Packaging Shall Include Generic Name Of Product, Lot/Batch No, Date, Month And Year Of Manufacture, Expiration Date, Month And Year, Manufacturers Name And Address, Consignee Address, Number Of Primary Packages, Gross Weight, Instructions For Storage, Disposal Instructions, Method Of Use And Indication As To Which Side Is Absorbent Etc And Any Other Printing Details Required By The Buyer As Per His Requirement Yes Ertifications Submission Of Form Central Govt/Nabl/Ilac Accredited Lab To Prove The Conformity To Declared Specification At The Time Of Supply Yes Certification Available Na , Ambu Bag General Type Self Filling With Air Usage Adult Utility Such As Clinic, Hospital, Ambulance Etc Clinic, Hospital Size Medium Colour Of The Bag Green Transparent Yes Flexible And Durable Yes Reusable Yes Autoclavable Yes Manual Resucitator Or Self-Inflating Bag Or Reservoir Bag For Positive Pressure Ventillating Yes Low Resistance Non-Breathing Expiratory Valve Available Yes Type Of Expiratory Valve Polysulphone Pressure Limiting Valve Available Yes Type Of Pressure Limiting Valve True Dimensions Maximum Bag Volume (Ml) 1000 Milliliter Length (Mm) 125 Millimeter Outer Diameter (Mm) 75 Millimeter Weight Including Patient Connector (Gms) 190 Gram Material Material (Medical Grade, Latex-Free, Non-Toxic, Non-Allergic And Antistatic) Silicon Rubber Functional Application Temperature 20 Deg C To 50 Deg C Yes Storage Temperature - 40 Deg C To 70 Deg C Yes Re-Breathing Bag Should Have An Expiratory Resistance Of 2 Point 2 Cms Of Water Yes Re-Breathing Bag Should Have An Inspiratory Resistance Of 3 Point 3 Cms Of Water Yes Re-Breathing Bag Should Have Controlled Flow Rates And Ventillation And With Reduced Airway Pressure Yes Port Available In The Bag To Connect With Oxygen Reservoir Yes Patient Connector Available Yes Type Of Patient Connector Psu And Silicon , 3 Seater Bench Steel Hevy Type Of Seating Separate Seat And Backrest Style With Arm And Backrest Seating Capacity (Nos) 3 Number Of Arms (Nos) 2 Delivery Status Knocked Down Supply To Be Assembeled By Seller On Site Seat Cushion Without Cushion Backrest Cushion Without Cushion Material Material Of Main Frame Mild Steel Material Of Seat And Backrest Mild Steel Material Of Arms Armrest Are Made Up Of Powder Coated High Pressure Aluminium Dye Cast Material Of Legs Powder Coated High Pressure Aluminium Dye Cast Legs Material Of Side Bar Bracket Made Up Of Chrome Plated Solid Steel Thickness Of Material Of Main Frame In Mm 1.8 Thickness Of Material Of Arms In Mm 1.5 Type Of Bolts M12 Bolts Thickness Of Pu Foam For Seat And Backrest ±2(Mm) N.A Density Of Pu Foam For Seat And Backrest ±2(Kg/Cubic Metre) N.A Covering Material For Seat And Backrest Na Dimension Overall Length In Mm (±10 Mm) 1840 Overall Depth In Mm ( ±5 Mm) 750 Overall Height In Mm (±5 Mm) 800 Seat Height From Floor In Mm (±5 Mm) 500 Mm Thickness Of Material Of Seat And Backrest (Mm) 1.2 Mm Certification Conforming To International Standard For Public Seating (*Bifma X 5 Dot 4 Or Equvalent) Yes Colour & Finish Colour Of Covering Material N.A All M S Strucure Finish Powder Coated Colour Of Paint Silver All Steel Component To Be Epoxy Powder Coated 50 Micron Thick Warantee Warantee Period In Number Of Years 1 Misc Seat And Backrest Are Perforated Yes Adjuster For Legs Yes Arms Chrome Plated Yes Legs Chrome Plated Yes Cushion On Arms No , Cushion Chair Tube Thickness - 1 Mm Tube Diameter - 16 Mm Weight: 5 Kg To 5.5 Kg Seat Material: Rexine Body Material: Steel Seat Color: Any Type Of Product: Visitor Chair Without Arms Style: Modern Primary Material: Metal Dimensions: 23 (L) X 21 (W) X 30 (H) Inch , Two Way Board One Side Black Board And One Side White Board With Magnetic Alphabets And Numbers , T-Shirts For Boys -Specification Utility: Unisex, Leeve Length ( Large Half Sleeve ), Depth Of Hemming/Binding At Neckline, Sleeve End And Bottom Binding 3 Cm, Material: Material ( Composition ), Polyester-42± 2%, Cotton-53± 2% And Lycra- 5± 1% ,Mass Of Material (G/ M²) 200 Gram, Knitting Interlock Knitted, Count Of Yarn (Ne) Double, Ph Value Of Aqueous Extract 6.0 To 8.0 ( Hot Method, As Per Is: 1390 ), Neck Binding / Collar Self Material, Bottom Hem ( Bottom Binding ) Self Material , Sleeve End Binding Self Materiallining Without Lining /Lining , Material 100% Polyester Mesh Mass Of Lining (Gram Per Square Meter) Not Applicable, Netting Mesh No Of Holes On Base & Bias Within 625 Square Millimeter Not Applicable Colour Of Mesh Lining Not Applicable Pattern Neck Type With Collars And Buttons Sleeve Type Set In Sleeve Full Sleeve Number Of Buttons In T Shirt With Collar Not Applicable Side Slit Without, Depth Of Side Slit ( In Case Of T Shirt With Side Slit) (Cm) Not Applicable Pocket Without Pocket, Size And Position Of Pocket ( In Case Of T Shirt With Pocket ) ( Width X Depth ) Not Applicable Stitching Sewing Thread 125 D Tex X 3, Polyester, Raw Edges, If Any Shall Be Bound By Overlock Stitching Yes Stitches Per Dm ( Min ) 36 Colour Colour As Per Buyers Requirements Colourfastness Of Fabric And Departmental Logo Colourfastness To Washing [Is/Iso 105-C10, Test- C (3)] Change In Colour - 4; Staining Of Adjacent Fabric - 4 Colourfastness To Perspiration ( Is 971 ) 4 Colourfastness To Rubbing ( Is 766) Dry - 4 / Wet - 4 Colourfastness To Light ( Is 2454 ) 5, Colour Fastness - Potential To Phenolic Yellowing Of Fabric 4 ( Test Method - Iso 105-X18:2007, Latest) Colourfastness To Washing ( Is/Iso 105-C10, Test- C (3))- Mesh Lining Change In Colour- 4; Staining Of Adjacent Fabric- 4 Colourfastness To Perspiration ( Is 971 )- Mesh Lining 4 Other Requirements Pilling Resistant [After 5 Hours Test As Per Is 10971 (Part 1)], Min 4 Dimensional Stability To Washing, Shrinkage Or Elongation Percentage, Max ( Is 2977 Latest), In Lengthwise And Width Wise Direction 3, Spirality, Percentage, Enumerable +/- 4 N/A Mandatory Max ( After One Wash ) ( Is/Iso 16322-1:2005 ) ( Washing As Per Iso 6330- 2A At 60 Degree C ±4, Label Tagless Logo And Marking Logo Marking As Per Grampanchayat / School/Anganwadi Requirements, Type Of Logo Embroidery Embroidery Thread For Logo Rayon , Pants For Boys -Specification Description Pants (Full Pants) For Anganwadi, Preschool,School Children/Boys Utility Utility Boys Size Size Large ( 0 To 18 Yrs ) Dimensions And Pattern Dimensions And Pattern As Per Sketch And Dimension Chart For Icds Pre-School Uniforms- Shorts For Children Of Anganwadi Centers In Gujarat, Furnished By Commissioner Of Women & Child Development, Gandhinagar, Gujarat ( Uploaded For Reference) Sketch And Dimensional Chart For Pre School Uniform- Shorts Has Been Seen And Understood Yes Material Fibre Composition (Warp & Weft) Polyester Staple Fiber (Psf) - 70% And Viscose - 30% (Tolerence ± 5%) ( Test -Method Is: 3416 , Part - 1 ) Count Of Yarn, Warp (Ne) 2/40S (Tolerence ± 5%) ( Test Method - Is: 3442 ) Count Of Yarn, Weft (Ne) 2/40S (Tolerence ± 5%) ( Test Method - Is: 3442 ) No Of Threads, Warp ( Ends Per Inch ) 64 (Tolerence + 5% / - 2.5%) No Of Threads, Weft ( Picks Per Inch ) 52 (Tolerance + 5% / - 2.5%) Mass ( Gram Per Sq Mtr ) 140G To 150G ( Test Method - Is : 1964 ) Weave Plain Stitching Sewing Thread 125 D Tex X 3, Polyester Stitches Per Dm 35 To 40 Raw Edges, If Any Shall Be Bound By Overlock Stitching No Colour Colour Any Other Colour As Per Buyers Requierment Colour Fastness To Light Change In Colour 4 Or Better ( Test Method - Is : 2454 ) Colour Fastness To Washing Change In Colour 4 Or Better , Stain On Adjacent Fabric 3 - 4 Or Better ( Test Method - Test C (3), Is / Iso 105 - C10 ) Colour Fastness To Perspiration Change In Colour 4 Or Better , Stain On Adjacent Fabric 4 Or Better ( Test Method - Is : 971 ) Colour Fastness To Rubbing Dry 4 Or Better , Wet 3 Or Better (Test Method - Is : 766 ) Other Requierments Pocket 2 Side Pockets Waist Band The Shorts Should Have Elastic For Full Portion Of Waist Band Logo And Marking Logo Marking No Type Of Logo Not Applicable Number Of Logos Not Applicable Size, Design And Location Of Logo As Per Buyers Requirement Yes , Socks For Boys And Girls -Specification Product Description Socks Nylon For Gents, Ladies And Childrens (As Per Indian Standard Is: 5084: 1990: Latest) Size Medium (As Per Ind) Colour Colour Other Colors As Per Buyers Requirement Other Colors As Per Buyers Requirement Yes Construction Type Of Knitting Fancy- Knitted (As Per Is Specification) Pattern Of Stitches (Only For Rib And Fancy Knitted Socks As Per Is) Na Kintting Structure Single Cylinder Heel And Toe Single Heel And Toe Top Of The Socks Plain Knitted Diameter Of Machine (Mm) (As Per Is) (Mm) Gauge Of Machine (As Per Is) (Number Of Needles/ Inch) 12 To 14 , Shoes For Boys -Specification Closure Velcro/Less/Slip On Care Rub Gently With A Damp Cloth And Mild Soap Occasion Formal Outer Material Pvc Sole Material Pvc Colour Black Unisex For Boys A Type Shoes Shoe Width: Medium Material Type: Synthetic Lifestyle: Casual , Shoes For Girls -Specification Closure Strap/Slip On Care Rub Gently With A Damp Cloth And Mild Soap Occasion Formal Outer Material Pvc Sole Material Pvc Colour Black Unisex For Boys A Type Shoes Shoe Width: Medium Material Type: Synthetic Lifestyle: Casual , Desk Bench Fibre For Kids Product Description Colorful Study Table For Childrens. Study Table Comes With Vibrant Colors And It Is Made Of Safe Plastic Material.With This Desk Get An Learning And Educational Feel In Atmosphere.Key Features This Table And Chair Combo Is Perfectly Sized For The Kids It Is Made Of High Quality Plastic Material, Which Is Safe And Durable. Kids Will Love To Sit And Study On The Intellect Desk Specifications Brand - Playgro Toys Type - Desk And Chair Set Carrying Capacity - Up To 20 Kg Color - Red Yellow Dimensions - 71 X 73.5 X 62.2 Cm Age - 3 To 8 Years Material - Plastic Items Included 1 Desk And Chair Set , Metal Tricycle Garbage Rickshaw Color Green, Blue, Etc Capacity 480Kg Type Garbage Length 1280 Mm , Lagori Set Material Type(S) Wood Color Multi Item Weight 499 G Package Dimensions 26.5 X 9 X 7.9 Cm With Rubber Ball , Cricket Bat Standarad , Cricket Ball Standarad , Stump Set Standarad , Skipping Rope Standarad , Badminton Set Standarad , Football Standarad , Volleyball Shape Shape Of Volleyball ( When Inflated ) Spherical Dimensions And Mass Circumference 65 Centimeter Weight 260 Gram Material Material Of Case ( Outer ) Synthetic Leather Thickness Of Material Of Case 2 Millimeter Material Of Inside Bladder Rubber Material Of Bladder If Other Than Rubber False Stitching Thread Linen Stitching Thread As Per Is 417 Part 2 Any Other Stitching Thread As Per Buyers Requirements Yes , Volleyball Net Mater+B14ial Of Net Cord Cotton Breaking Strength Of Cord As Per Is 3345 Not Applicable Circumference Of The Cord Of Net 9.5 Millimeter Rope/ Cord To Tie With Post On Both Sides Nylon Breaking Strength Of Rope/ Cord ( Min ) As Per Is 3345 Not Applicable Material Of The Band At Top, Bottom And Sides White Canvas Material Of Flexible Cable Inserted In The Top Band To Fasten The Net To Posts And Keep Its Top Taut Na Dimensions Length Of Net 9.5 Meter Width Of Net 1 Meter Width Of The Two Fold Band At Top 7 Centimeter Width Of The Two Fold Band At Bottom Through Which A Rope Is Threaded 5 Centimeter Width Of Two- Fold Side Band 5 Centimeter Length Of Net On Each Side Of Side Bands 25 Centimeter Size Of Mesh Size Of Mesh ( Square ) Max 10 Centimeter Colour Colour Of Net As Per Requiremetn , Flying Ring Concept Of Toy This Light Weight Toy Provides Endless Variety Of Activities And Games To Children Configuration Having Flying Disc - Upper Side Of The Disk Imbossed/Engraved With Number/Alphabet/Picture (To Attract The Child) : As Reference Representative Image Uploaded Colour Of Flying Disc Any Style Of Upper Side Of Disk Engraved Upper Disk Designed (Embossed / Engraved) With N.A Approval Of Advance Sample Before Bulk Supply No Advance Sample Material Plastic Fruits And Vegetables Made Up Of Non Toxic Virgin Plastic Virgin Polyethylene Terephthalate Dimension & Mass Approximate Outer Diameter 300 Mm Approximate Weight Of Flying Disc 190 Gms. Colour-Finish & Packing Made-Up Ingredients Should Not Be Harmful To Kids Yes Colour And Finish (Other Indeterminable Parameters) N.A The Complete Set Should Be Properly Packed That It Should Not Damage During Transit Yes Flying Disk Big Should Not Have Sharp Edges Or Corners (Safety Point Of View) Yes , 1 Pairs Dandia Sticks For Traditional Games In School/Anganwadi(Multicolor) (14 Inch) Product Specification Name Of The Product Category Wood Crafts / Wood Carving Name Of The Subcategory Wooden Handicraft Name Of The Product Dandiya For Garba Ku Code Sku Code 390 Description Description 1 Pair Dimensions Dimensions ( Mm ) 14 Inch Mass Mass Material Material Wood , Side Drum , Javelin Stick(Bhala Normal)Dimensions Length Of Antenna 1.8 Meter Diameter Of Antenna 10 Millimeter Colour Colour Of Antenna Antenna Is Marked With 10 Cm Stripes Of Red And White Colour Alternatively. Standards And Certifications Product Generally Conforming To Is 3345- 1989 Latest No Product Confirming To International/ National Federation Requirements Like International Volleyball Federation ( Fivb )/ Volleyball Federation Of India ( Vfi ) Yes Certification From International/ National Federations Like International Volleyball Federation ( Fivb )/ Volleyball Federation Of India ( Vfi ) Yes Date Upto Which Certification Is Valid No Warranty Warranty 1 Year Advance Sample Agree To Provide Advance Sample(S) For Buyers Approval Before Commencement Of Supply Yes , Shot Put (Gola Normal) Utility Competition Material Of The Ball Cast Iron Mass And Diameter Of Shot Put- Competition Mass- 3.005 To 3.025 Kg, Diameter- 85 Mm To 110 Mm ( 3 Kg Shot Put ) Product Generally Conforming To Is 4386: 1988, Latest Yes Product Confirming To International/ National Federation Requirements That Is International Association Of Athletics Federations ( Iaaf )/ Athletics Federation Of India ( Afi ) Yes , Lezim 1 Piece Lezim / Lazium Equipment. Product Dimensions: 33 X 2 X 2 Cm Repeatedly Used In School Dance, Military And Other Organizations As A Fitness Drill Best Sports And Entertainment Tools For Exercise And Entertainment Purposes All Material Used Steel And Wire Is Broad And Plat Is Heavy Steel Number Of Puzzle Pieces 1 Batteries Required No Material Type(S) Wood & Steel Color Multi Item Weight 200 G Product Dimensions 6 X 6 X 33 Cm , Chess Set Description Chessboard With Chess Pieces Dimensions And Mass Size ( Length X Width ) Chess Board 32 Centimeter Size Of Square In Chess Board 4.5 Centimeter Mass Of Chessboard ( Gram ) 100 Pieces Total Chess Pieces Total 32 Pieces Are Used For Playing Chess. Each Player Has 16 Pieces: 1 King, 1 Queen, 2 Rooks, 2 Bishops, 2 Knights And 8 Pawns. Height Of Pieces King - 9.5 Cm, Queen - 8.5 Cm, Bishop - 7 Cm, Knight - 6 Cm, Rook - 5.5 Cm And Pawn - 5 Cm. (These Dimensions May Differ Up To 10% From The Above Recommendation, But The Order (E.G. King Is Higher Than Queen Etc.) Must Be Kept) Diameter Of Pieces Base 40-50% Of Its Height. Material Material Of Chess Board Cardboard Material Of Chess Pieces Hard Plastic Colour Colour Of Chessboard The Colors Of The 64 Squares Alternate In Colour I.E Light And Dark Squares. Colour Of Black Pieces Black Colour Of White Pieces Cream Other Requirement Strong And Durable Yes Style Of Pieces Staunton Foldable Type Yes Provision For Storage Of Chess Pieces In Chess Board Magnetic Attraction Between Chessboard And Pieces No , Carrom Board With Carrom Man, Striker And Powder Size 26X26 Shape Shape Of Carrom Board Square Playing Surface Of Carrom Carrom Playing Surface Material Lacquered Plywood Size Of Playing Surface (Side Of Square) 73.5 Cm To 74 Cm Thickness Of Playing Surface (Min) 8 Mm Carrom Playing Surface Is Waterproof Yes Surface Finish Completely Smooth (Carrom Board Shall Be Able To Have At Least Three And A Half Runs Of A Normally Smooth Striker Of 15 Gms Weight, When Struck With The Maximum Force, From One Of The Base Lines, To The Opposite Frame Of The Carrom Board.) Carrom Frame Material Of Carrom Frame Any Other Hard Wood With Good Resistance Carrom Frame Breadth 7.2 Centimeter Carrom Frame Height From Playing Surface 2.54 Centimeter Corners Of The Frame Corners Which Are Adjoining The Playing Surface Are Inside Curved Bracing Suitable Bracings Shall Be Provided Underneath The Playing Surface And Fastened With The Frame. Pockets Of Carrom Pockets At Four Corners Pockets Should Be Round Inwardly And 4.45 Cm In Diameter With Admissible Variation Of Not More Than 0.15 Cm Pocket Net Each Pocket Net Shall Have Capacity Of Holding At Least 10 Coins Marking On Playing Surface Of Carrom Board Base Line Two Straight Lines, Black In Colour, Of 47 Cm (± 0.30 Cm) Each In Length On All Four Sides Of The Playing Surface, Parallel To The Frame. The Lower Of These Two Lines, Which Shall Be Between 0.50 Cm And 0.65 Cm In Thickness, Shall Be 10.15 Cm Away From The Frame And The Other One 3.18 Cm Away From The Lower Part Of The Base Line. Base Line Circles The Base Lines Shall Be Closed By Circles Of 3.18 Cm In Diameter At Both Ends. Within This Circle A Portion Of 2.54 Cm In Diameter Shall Be Coloured In Red. These Shall Be Drawn So As To Touch Both The Base Lines And Also The Upper Base Lines Of The Adjacent Side When Imaginably Extended. The Distance Between The Base Circle On One Side And That Of The Other May Be 1.27 Cm Approximately. Arrows Four Arrows, Black In Colour, Of Not More Than 0.15 Cm Thickness Shall Be Drawn At Each Corner Of The Carrom Board At An Angle Of 45 Degrees To Any Of The Adjacent Sides And Each Of Them Shall Pass Through The Gap Between The Two Base Circles And Point Towards The Centre Of The Pocket Leaving A Clear Distance Of 5.00 Cm From The Edge Of The Pocket. The Length Of The Arrows Shall Not Exceed 26.70 Cm. A Decorative Arch Of 6.35 Cm In Diameter With Pointers At Both The Ends, Drawn At The Starting Point Of The Arrows Leading Towards The Pocket, Is Permissible. Centre Circle Exactly In The Centre Of The Carrom Board There Shall Be A Circle Of 3.18 Cm (± 0.16 Cm) In Diameter Drawn Black In Colour. Circle Shall Be Filled In Red Colour.Outer Circle A Circle Of 17.00 Cm (± 0.30 Cm) In Diameter With The Centre Point Of The Carrom Board As Its Centre, Black In Colour. Any Decorative Design In The Circle Is Permissible. , Rubber Ring Approximate Diameter Of Outer Ring 150 Mm Approximate Diameter Of Inner Ring 90 Mm Weight Of Ball With Tolerance Of (-) 10 Gms N.A Weight Of Ring With Tolerance Of (-) 10 Gms 100 Gms. , Wall Fantype Of Fan Mounting Bracket Mounted Fan For Wall Mounting, Method Of Mounting On Fan Base Oscillating, Type Of Fan Motor Non-Capacitor Type, Fan Size 400 Millimeter, Minimum Air Delivery (Cubic Meter/ Min) 65 For 400Mm, Maximum Input Power For Capacitor Type Fan (Watt) 61 For 400Mm, Maximum Input Power For Non - Capacitor Type Fan (Watt) 73 For 400Mm, Ingress Protection For Fan Motor And Regulators Ip 21, Generic Motor Type Ac Type Of Enclosure Of Motor And Regulator Ventilated, Class Of Insulation For Fan And Regulator Class Ii , Rated Voltage 220V Ac Speed Control Mechanism Pull Cord Or String Based Control , Rpm At Maximum Speed 1325, Number Of Blades 3 , Material Of Blade Aluminiums, Body Colour Any, Blade Colour Any ,Fan Guard Yes Fan Guard Material Powder Coated Metal Wire Number Of Speed Steps 3 Adjustable Vertical Tilt Yes Angular Movement 180 Degree, Length Of Cord With Suitable Plug Top (Inclusive In The Scope Of Supply) 2 Meter, Additional Features, If Any High Speed , List Of Items And Quantity Of Each Item Included In The Offer Wall Mounted Clip , Gas Bhatti Single Burner- General Fuel Type Lpg Material Body Material Stainless Steel(304) Leg Material Stainless Steel(304) Shape,Design & Colour Top Shape Square Number Of Burner 1 Regulator With Step In Regulator 1 Stove Leg Withleg Shape Square Pipe Stove Wheel No Number Of Wheel Na Wheel Brake No Finish Polished Dimensions Overall Length(In Mm) 300-320 Overall Width(In Mm) 301-320 Overall Height(In Mm) 300-320 Burner Diameter(In Mm) 50-60 Wheel Diameter(In Mm) 121-130 Ss Sheet Body Thickness(In Mm) 0.61- 0.7 Pipe Size(In Mm) Dia 20 Pipe Thickness(In Mm) 0.8- 0.9 Leg Height(In Mm) 41-50 , Desk Bench For Kid 6 To 10 Yrs Generic Type Of Desking Integrated Desk Cum Seating With Shelf / Storage Under Desk Desking Configuration Three Seater Length Of Desking, Seating And Backrest (If Provided) In Mm (±10 Mm) 1500 Desk / Bench Specifications Material Of Desk Top +/- 2 Mm (For Shelf / Storage +/- 4 Mm) 20 Mm Thick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 0.5 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Or Side Pannel Ss 202 Structure Height Of Desk Top In Mm (±5 Mm) 700 Width Of Desk Top In Mm (± 5 Mm) 400 Seating Specification Material Of Seat And Backrest (If Provided) (+/- 2 Mm (For Back Rest +/- 4 Mm) 20 Mm Hick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 0.5 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Ss 202 Structure Material Of Seat Cushion Without Cushion Width Of Seating In Mm (±10 Mm) 300 Height Of Seat In Mm (±10 Mm) 460 B193width Of Backrest If Provided In Mm (± 5 Mm) 280 Back Support For Seating Of Same Materail As Seating Provided Without Cushion Misc Design As Per Dgs&D Drawing No Dqa/Ge/Rc-208/Schedule 19 (Drg 1,2,3,4,5,6,7,8,9,10) Can Be Configured As Per Buyers Choice Within Offered Technical Details Colour Of Finish As Per Buyers Choice Desk Top Finishing Two Long Sides Shall Have Post Form Half Round Profile And Other Two Sides Edge Banded With 2 Mm Thick Pvc Tape With The Help Of Hot Melt Glue , Desk Bench For Kid 10To 16 Yrs Generic Type Of Desking Integrated Desk Cum Seating With Shelf / Storage Under Desk Desking Configuration Three Seater Length Of Desking, Seating And Backrest (If Provided) In Mm (±10 Mm) 1500 Desk / Bench Specifications Material Of Desk Top +/- 2 Mm (For Shelf / Storage +/- 4 Mm) 20 Mm Thick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 0.5 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Or Side Pannel Ss 202 Structure Height Of Desk Top In Mm (±5 Mm) 700 Width Of Desk Top In Mm (± 5 Mm) 400 Seating Specification Material Of Seat And Backrest (If Provided) (+/- 2 Mm (For Back Rest +/- 4 Mm) 40 Mm Hick Mdf Board Of Grade Sbg Ii Conforming To Is 12406 Laminated With Minimum 0.6 Mm Thick On Top Side Of Type S, P Or F Having Index 3.2.3 Conforming To Is 2046 And Minimum 1 Mm Thick Balancing Laminate On The Other Side Material Of Support Structure Ss 202 Structure Material Of Seat Cushion Without Cushion Width Of Seating In Mm (±10 Mm) 300 Height Of Seat In Mm (±10 Mm) 800Mm B193width Of Backrest If Provided In Mm (± 5 Mm) 280 Back Support For Seating Of Same Materail As Seating Provided Without Cushion Misc Design As Per Dgs&D Drawing No Dqa/Ge/Rc-208/Schedule 19 (Drg 1,2,3,4,5,6,7,8,9,10) Can Be Configured As Per Buyers Choice Within Offered Technical Details Colour Of Finish As Per Buyers Choice Desk Top Finishing Two Long Sides Shall Have Post Form Half Round Profile And Other Two Sides Edge Banded With 2 Mm Thick Pvc Tape With The Help Of Hot Melt Glue , Amplifire 800 Watt Power Output 1150W Rms Max., 800W Rms At 10%Thd, 770W Rms At 5% Thd 725W Rms At 2% Thd Output Regulation = 2Db, No Load To Full Load At 1Khz Input Channels 1 × Mic 1Mv / 4.7K?, 1 × Aux 100Mv / 470K?, 1 × Aux 250Mv / 20K?, 1 × Cd 250Mv / 20K?, 1 × Line 1V / 20K? Frequency Response 50Hz-18,000Hz ±3Db Signal To Noise Ratio 60Db Tone Controls Bass (100Hz) : ± 8Db, Treble (10Khz) : ± 8Db Line Output 1V/1K? Speaker Output 2O, 4O & 8O , Speaker Box 700 Watt Pairinput Power 700W Rms Configuration Two Way Frequency Response 40-20,000Hz Components 2 × 15 Lf Speaker, 16 × 7 Dynamic Hf Unit Special (1W/1M) 103Db Max. Rated Special 131Db Nominal Impedance 4O Crossover Frequency 2Khz Port Free Flow Flared Input Connectors 2 Nos. Of Speakon Sockets Dimensions W530 × H1210 × D510mm Weight 65.00Kg , Sound Mixer For Amplifier Power Requirement Ac: 220-240V 50/60Hz, Dc: 12V (1×12V Car Battery) Outputs 2 × Preamp 200Mv/600O, 4 × Line 1V/1K?, 1 × Headphone 120Mv@ 8O Frequency Response 20-20,000Hz (±3Db) Distortion 1% Signal To Noise Ratio 50Db Input Channels 12 × Mic 0.6Mv/4.7K?, 2 × Aux 100Mv/470K?, 1 × Aux 500Mv/100K? Tone Controls Bass: ± 10Db At 100Hz, Treble: ± 10Db At 10Khz Dimensions W350 × H145 × D200 Mm Weight 3.9Kg , Pa Music Horn Input Power 40W Rmspower Taps 40/20/10/5W Impedance 250/500/1K/2K? Frequency Response 120-16,000Hz Special At 1Khz 98Db/1W/1M; 114Db/40W/1M Dimensions W370 × H255 × D300 Mm Weight 6.5Kg Material Abs (Uv Protected) , Mice Stand Type Floor Stand Height 920-1500 Mm Base Dia 230 Mm Weight 4.41Kg , Wireless Mic Type Wireless Form Factor Collar (Lapel) If Wireless, Operating Range (Meter) 30 Meter If Table Top, Length Of Goose-Neck (Mm) 0 Millimeter Polar Pattern / Directionality Cardioid Microphone Transducer Type Condenser Inbuilt Speaker No Frequency Response (Hz) 20-20,000 Hz Equivalent Noise Level (Dba) 15 Signal To Noise Ratio (Db) 15 Electrical Impedance (Ohm) 0Sensitivity -50 Dbv/Pa (3.15 Mv)Led Indicator Availableon/Off Switch Availablevolume Control Yesaudio Connector Type Xlrcasing Material Plasticpower Source Acoperating Temperature Range (Degree C) 5 Operating Humidity (Rh%) 80Dimension (W X H X L) (Mm) 210 X 42 X 152Net Weight (Gram) 250 Gramwarranty (Years) 1 , Wired Mic Specificationtype Wired Form Factor Handheld If Wireless, Operating Range (Meter) 0 Meter If Table Top, Length Of Goose-Neck (Mm) 0 Millimeter Polar Pattern / Directionality Cardioid Microphone Transducer Type Dynamic Inbuilt Speaker No Frequency Response (Hz) 20-20,000 Hz Equivalent Noise Level (Dba) 14 Signal To Noise Ratio (Db) 12 Electrical Impedance (Ohm) 14 Sensitivity -54.5 Dbv/Pa (1.85 Mv) Led Indicator Not Available On/Off Switch Available Volume Control No Audio Connector Type Xlr Casing Material Plastic Power Source Dc Operating Temperature Range (Degree C) 34 Operating Humidity (Rh%) 34 Dimension (W X H X L) (Mm) Na Net Weight (Gram) 1.56 Gram Warranty (Years) 1 , Xlr To Aux 6.5 Mm Cable Xlr Female To 1/4 Ts Cable Is Made Of 100% 4N Ofc For Effective Emi And Rfi Rejection And Flexibility, Extremely Provide Low Fidelity Attenuation During The Long Distance Transmission. ?Hi-Fi Quality?: The Microphone Cable Has Double Shielding (High Density Bc Braid Shielded + Aluminium Foil) Can Provide High Stable Performance And Lowest Loss During The Transmission. Heavy Duty Alloy Metal & Gold-Plating Connectors Increase Durability , Anti-Oxidant, Plugging And Unplugging 6,000 Times To Deliver Pristine Sound. ?High Performance & Rohs Pvc?: The Furui Xlr Female To 6.35Mm 1/4 Ts Cable Has High Resistance Tensile Strength Rohs Pvc Insulation Improves High Frequency Response, Extreme Resistance To High And Low Temperature 14? - 572?(-10?-300?). ?High Strength Nylon Braid & Tensile Resistance Cotton Yarn Wrap?: Ours Microphone Cable Use High Strength Nylon Braided Support 20 - 25 Kg Pulling Force, High Resistance Tensile Strength Cotton Yarn Wrap Provides Amazingly Superior Clarity And The Highest Cancellation Of Noise And Rf Interference. And Ours Xlr Female To 1/4 Ts Cable Is Very Flexible, 23 Awg, Od 6.5 Mm (0.256 Inch), Can Bent 90 Degree. , Cymbal /Zanj Band Pair Cymbal Type Clash Cymbal Material Nickel, Silver Plated Size 20 Inch , Mop / Pocha Package Mop 1, Mop Head 2, Liquid Dispenser Mop Comes With Microfiber Mop Head Works Great Wet Or Dry Banded Strands Make The Mop Super-Absorbent Mop Cleans Easily Around And Under Furniture, In The Bathroom And Along Baseboards And Other Hard-To-Reach Places Keeps Your Hands Out Of Dirty Water Mop Head Disengages With Your Foot So Your Hands Never Have To Touch The Mess Handle Angle May Be Adjusted From 45 To 180 Degrees For The Most Comfortable Mopping Position Mop Head Is Machine , Nail Cuitter For Kids 0 To 12 Yrs Key Features: Stainless Steel Blunt Edge Avoid Hurting Your Babys Skin Easy To Clean Specifications Type - Nail Clipper Age - 2 To 4 Years Package Dimension - 12 X 7 X 5 Cm Product Dimension - 12 X 7 X 5 Cm Weight - 70 Gm Items Included In The Package 1 Nail Clipper The Baby Nail Clipper Are Made In Stainless Steel. It Has Curved Blade With Rounded Ends To Ensure Complete Safety During Use. They Come With A Cover To Hygienically Protect The Blades When Not In Use. The Front Part Of The Scissors Is Round Shape Designed. , Pencil Type And Grade Type Of Pencil General Writing Grade Hb Physical Properties Length Of Pencil (Mm) 177 No. Of Pencils In One Pack (Nos.) 10 Shape And Color Shape Of Pencil Hexagonal Body Colour Blacl Gray , Eraser-Soft And Smooth Erases Graphite Gently Without Damaging Paper Picks Up Dust While Erasing , Sharpner Body Material Plastic / Metal Blade Material Metal Blade Length (Mm) 10 Blade Width (Mm) 5 Diameter Of Sharpening Hole (Range) 9Mm-10Mm Sharpening Holes Singl , Type Ofregisters Plain Register Dimension Of Paper (Length X Width) (Mm X Mm) 148 X 210 Dimension Of Cover (Length X Width) (Mm X Mm) 160 X 215 Grammage Of Paper (Gsm) 70 Grammage Of Cover Paper (Gsm) 150 Brightness Of Paper (%) 72 Smoothness Of Paper (Bendtsen) (Ml/Min) 120 Opacity (%) 80 Number Of Pages 200 Type Of Binding Softcover Cloth Bound Content And Desciption General Format , Two Way Board (One Side Black And One Side White Board Inclidoing Magnetic Alphabets And Numbers) , Cob Web Brush Ape Of Brush Round & Curved Cobweb Brush Head Detachable Type Of Stick Telescopic Material Material Of Bristles Plastic Material Of Stick Plastic Dimensions Length Of Bristle (Mm) 100 Overall Length Of Brush Head (Mm) 225 Length Of The Stick (Full Open) (Mm) 2500 Overall Weight Of Cobweb Brush 170 , Wooden Speech Podium / Lecture Stand/Dias: Mode Of Supply Assembled Ready To Use Frame Type Free Standing Understructure Of Podium Gable End And Modesty Panel Storage No Storage Shelves Without Shelves Reading Surface Angled Surface Top Position Fixed Paper Stop No Wire Management Without Number Of Socket Box 0 In Built Sockets For Lan / Internet No Type Of Socket Box No Socket Box Material Podium Top Material Mdf Board Of Grade Sbg Ii Of Is 12406/Latest Gable End And Modesty Panel Material Flat Single Layer Prelaminated Mdf Board Conforming To Having Designation Plmdf-23 Of Is 14587/Latest Leg Material Teak Wood Misc Podium Top Long Sides To Be Post Form Half Round Profile With Corner Edge Bending Podium Top Plain Sides Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Gable End And Modesty Panel Plain Side N.A Number Of Buffers Provided N.A Dimension Thickness Of Podium Top ±2Mm 12 Millimeter Thickness Of Gable End And Modesty Panel ±2Mm 12 Millimeter Length Of Podium Top ±10Mm 600 Millimeter Depth Of Podium ±10Mm 500 Millimeter Height Of Podium ±10Mm 1100 Millimeter Presenter Side Height ± 10Mm 1050Mm Dimension Of Leg (Mmxmm) ±5Mm No Legs Shelves Width Of Shelves ±10Mm N.A Depth Of Shelves In Mm (±10Mm) Na Footrest Material Of Footrest Flat Single Layer Prelaminated Mdf Board Conforming To Having Designation Plmdf-22 Of Is 14587/Latest Length Of Footrest ±10Mm N.A Depth Of Footrest ±10Mm N.A Height Of Footrest (Front / Back) ±10Mm N.A Finish Of Exposed Edges To Be Banded With 0.5-1.0Mm Thick Pvc Tape With The Help Of Hot Melt Glue Material Thickness Of Footrest ±2Mm N.A Colour & Finish Podium Top Finish Laminate In Colour With Swede Finish 0.6-0.8Mm Thickness Of Type S,F Or P Having Index No.3.2.3 Conforming To Is 2046/Latest With Having Balancing Laminate Of 0.5Mm Thick On Other Sidetable Top Shade Peach Warranty Warranty Period In Number Of Years 1 , Pa Driver Units Weatherproof And Rugged Construction. High Spl, Crisp Penetrating Sound. Voice Coils Precision-Wound On An Aluminium Bobbin For Efficient Heat Dissipation. Degree Of Protection Ip 66 Provided, When Mounted On A Reflex Horn, Against Foreign Particles Such As Dust And Jets Of Water Thus Making Them Ideal For Outdoor Use. Meets En 60529.Input Power 60W Rms/90W Max. Impedance 16O Frequency Response 160-7,000Hz Special At 1Khz 113.5Db/1W/1M, 132Db/60W/1M Temperature Range -30°To + 70°C Throat Coupling 1-3/8 - 18Tpi, Throat Couple No.1 Dimensions Ø125 X H100 Mm Weight 2.05Kg Material Die-Cast Aluminium Acoustic Head (Flange) , Pa Trumpet Horn-Heavy Duty Aluminium Trumpet Is Ideal For Most Of The Large Outdoor Installations. Rugged Construction And Fitted With A Protective Pvc Ring On The Flare. Acoustically Well Designed, It Matches Ahuja Driver Units For An Efficient, Powerful And Clear Sound.Bell Dia 22 Cut-Off Freq. 160Hz Weight 2.27Kg , Amplifire Ideally Suited For A Wide Variety Of Music And Public Address Applications.6 Mic & 2 Aux Inputs.Built-In Mp3 Player With Lcd Display, Remote Control, For Usb, Sd/Mmc Cards.Preamplifier And Line Output For Connecting To A Booster Amplifier And For Recording The Programme.Line Input For Connecting The Output From Any External Mixer Or Permittingamplifire To Be Used As A Booster Power Amplifier Resettable Circuit Breaker For Protection Against Overload And Short Circuit.Instant Transfer To Dc Power (2Ã- 12C Car Battery) If Ac Power Fails.Box Speaker/Driver Unit Selector Switch. Bass Boost Defeated At Driver Unit Position For Safer Operation Of Driver Units. , Mic Microphone Cable 100M Material Plastic Branded Color Black Size 100M Power Source Electric Pack Type Box 2*(28/0.08Mm Bc+1/Tinsel Copper+1.75Mm Pvc)+Filling Cotton Yarn+Alp+112/0.08Mm Bc Braid +5.8Mm Pvc , Mic All Purpose Pa Microphone Reproducing Intelligible, Crisp And A Bright Sound. Suitable For Multi-Purpose Pa Installations. Supplied With Quick Detachable Holder With 3-Pin Professional Xlr Connector & 6 Mtrs. Twin Core Shielded Low Noise Cable. , P A Speaker ? 100 Watts ? Pa Speaker System ? A Compact Superior Quality Speaker System Comprising Of A Single 12 Full Range Dual Cone Speaker And A Piezo Horn Tweeter. The System Is Outstanding For Its Ability To Handle 100W Continuous Power With Undistorted Response And Is Ideal For Small Pa Applications. ? The Speakers Are Housed In A Rugged Closed Box Enclosure Made Of 18Mm Board, And Carpet Covered. ? 16.70Kg ? 12 Months Warranty , Mic Stand Microphone Stand Employ Sturdy Mechanism Ensuring Trouble Free Movement And Positioning Of Microphone. These Stands Are Functional And Resistant To Rust, Due To Superior Quality Of Chrome Plating/Powder Coating. Ahuja Stand With 5/8 27 Tpi To Match All Microphones.Type Floor Stand Height 920-1500 Mm Base Dia 230 Mm Weight 4.60Kg , Map 8 Nos Set As Following 1 Chikhali Taluka,2 Buldana District, 3 Maharashtra State, 4 India Country, 5 World Map, 6 Natural Map Of Maharashtra, 7 Social Map Of Maharashtra, 8 Political Map Of Maharashtra , Hand Held Digital Infrared Medical Thermometer For Measuring Body Temperature General Features Product Description Hand Held Digital Infrared Medical Thermometer For Measuring Body Temperature Purpose Infrared Thermometer Is A Quick And Easy-To-Use Method To Measure Body Temperature Suitable For All Age Group Product Information Type Of Thermometer Non Contact Infrared Thermometer Body Material Of Ir Thermometer Abs Color Of Device White Ergonomic Design Yes Temperature Display Unit Degree Celsius & Degree Fahrenheit Primary Measurement Mode Body Temperature Mode Measuring Site For Body Temperature Ear & Forehead Lowest Measurable Temperature For Body Mode 32°C (89.6°F) Or Lower Highest Measurable Temperature For Body Mode 42°C (107.6°F) Or Higher Accuracy Of Measurement For Body Temperature In °C (±) 0.2 Degree Celsius Accuracy Of Measurement For Body Temperature In °F (±) 0.5 Lowest Measurable Temperature For Room Temperature Mode 0°C (32 °F) Or Lower Highest Measurable Temperature For Room Temperature Mode 50°C (122 °F) Or Higher Sensor Type Thermal Sensor Display Resolution 0.1°C/0.1°F Response Time 1 Second Measuring Distance For Non Contact Type Ir Thermometer 5 Cm Or Better Number Of Recent Readings That Can Be Stored 10 Built-In Laser Pointer Weight Of Device With Battery 150 Gram Dimensions Of Device (Mm X Mm X Mm) 150X75x40 Display Display Type Lcd Display Backlit Display Yes Display Size 1.5 Inch Features Features Available Interchangeable Celsius & Fahrenheit Modes,Low Battery Indicator,Auto Power On,Trigger/Button For Operation,Auto Power Off When Not In Use,Display Of Previous Reading On Screen With Current Reading,Sound Indication When The Thermometer Is Ready To Take Or Show The Temperature,Audible Alarm For Fever,Different Backlight Colours To Differentiate Between The Fever Ranges,Silent Mode,Auto Hold Function,Waterproof Lens Easy To Clean And Disinfect,Data Transfer Facility Of Other Devices Through Usb/Bluetooth/Wifi/Rs 232,Limit Value For The Adjustable Alarm As Programmable Power Source Power Source Non Rechargeable Battery Battery Chemistry Li-Ion Battery Size, If Non Rechargeable Battery Aaa Number Of Batteries Required For Operation 2 Number Of Batteries Supplied (Inclusive In The Scope Of Supply) 2 Nominal Voltage Of Each Battery (V) 1.5 , Finger Tip Adult And Pediatric And Neonatal Pulse Oximeter Performance Parameters Type Of Pulse Oximeter Finger Tip Should Work During Motion And Very Low Perfusion Conditions Yes Special Signal Processing Technology (Motion Artifact Rejection) Nellcor Compatible Spo2 Probes Disposable Oxygen Saturation Range 0-100% Pulse Rate 25-240 Bpm Display Of Spo2 And Periodical Renewal Digital Display With Bar Graph Accuracy ± 5 % Type Of Patient Adult,Pediatric Should Be Shock Proof Yes Display (With Contrast Adjust-Ability) Lcd Display Should Be Readable From At Least 3 Feet Yes Saturation Displayed On The Screen No Pulse Rate Displayed On The Screen Yes Perfusion Index Displayed On The Screen Yes Status Of Battery Charging Displayed On The Screen Yes Sensor Off /On Status Yes Audible And Visual Alarms Yes Alarm Override Facility Should Be Present Yes Trends 72 Hrs Type Of Trend Display Graphical Data Interval In Sec 0 Power Source Battery Operated Automatic Switch From Mains To Battery In Case Of Power Failure Na Rs 232C Interface For Data Communication And Transfer Na Should Have Provisions For Wireless And Blue Tooth Connectivity Na Patient Extension Cable Not Provided Power Consumption In Watts 0 Operating Temperature Ambient Temperature Of 0 To 40 Deg C And Relative Humidity Of 15 To 90% Weight Of The Machine In Kg 10 Protective Splash Proof Case For Clean And Strogage And Safe Transport Provided No Length Of Power Cable Na Noise Level In Db 0 Display Must Allow Easy Viewing In All Ambient Light Levels Yes , Blood Pressure Machine Digital / Appratus Configuration Details Type Of Sphygmomanometers Or Blood Pressure Recording Unit: Digital Conformity To Indian Standrad For Sphygmomanometers Na For Digital Measuring Device Automated Type Portable Isi Marked Na For Digital Cm/L No And Validity Date Bp-(235)01 26/07/17 Measurement Method Oscillometric Display For Digital Bp Instrument: Lcd(Liquid Crystal Digital) Display Range: Pressure Measurement (Mmhg) 0 To 300 Range:Pulse Measurement For Digital With Accuracy &Plusmn; 5%. (Per Minute) 40 To 200 Accuracy:Pressure Measurement (Mmhg) +/- 3 Pressure Detection Capacitive Pressure Sensor Inflation Automatic Pressure Application By Pump Deflation And Rapid Air Release Automatic Pressure Release Valve Cuff Range Medium (22-32)Cm Dimensions Of The Equipment (Mmxmm) 400 X 80 X 90 Dimensions Of The Display Screen (Mmxmm) 59 X 43 Operating Temperature Range 0 To 55 Degree Celsius Stroage Temperature Range (-10) To 55 Degree Celsius Automatic Power Off If System Is Idle For 3 Minutes. Yes Weight (In Gram) 250 Power Power Source: Aa Size Chargeable Battery Set Type Of Aa Size Chargeable Battery (Aa Size) Lithium , Automatic Online Water Chiller 2 Ton Capacity Item Item Industrial Chiller Design No Of Door Single Position Of Door Top Opening Door Type Hinged Air Tight Door Yes No Of Shelves 0 Wheels No Visibility Of Item Stored No Type Of Insulation Poly Urethane Foam Method Of Defrosting Manually Deforested Type Of Cooling Direct Lock Yes Material Material Of Chamber Interior Abs Material Of Chamber Exterior Prepainted Sheet Door Material Polycarbonate Door Polycarbonate Window Door Cooling Coil Material Copper Instrument Temprature Controler Yes On/Off Switch Yes Storage Chamber Temprature Display Yes Audio Alarm Visual Alarm Digital Display No Visual Alarm Yes Digital Display Yes Capacity And Dimension Storage Volume(Net Capacity)(Liters) 1000 Over All Length(Mm) 1500 Over All Width(Mm) 1000 Over All Height(Mm) 1000 Insulation Thickness(In Mm) 60 Holdover Time(Minute) 60 Performance Eco-Friendly Refrigurator Yes Compressor Ac Reciprocating Compressor Set Temperature Range(Delta) 5 Minimum Achievable Temperature At 32 Degree Centigrade 8°C Green Refrigerants Yes Type Of Refrigerants R134a Voltage 220-240, Single Phase , 50 Hz Power Consumption(Kw/Day) 10 , Sink Hand Wash Station Item Stainless Steel Sink Built In Counter Uses Mess/School/Office And Other For Protection Against Covid-19 And Other Viruses Type Of Sink Built In Counter Stainless Steel Single Bowls Single Drain Board Sink Units Design Shape Of Sink Built In Counter Rectangle No Of Tap Holes 2 Design Feature In Stainless Steel Sink Built In Counter Tap Holes,Over Flow Holes,,Under Self Provided,Drainage Pipe Provided,Waste Jali Provided,Stiffener Provided Between Legs,Kitchen Unit Design Should Be Robust,Back Panel Above Table Provided,Three Side Panel Above Table Provided,Left Hand Side Drainage Provided,Right Hand Side Drainage Provided,Heavy Duty Rubber Shoe Dimension Length Of Counter(In Mm) 1200±10 Width Of Counter(In Mm) 700±10 Height Of Counter(In Mm) 900±10 Length Of Sink Bowl(In Mm) 450±10 Width Of Sink Bowl(In Mm) 500±10 Depth Of Sink Bowl(In Mm) 450±10 Length Of Additional Sink Bowl(In Mm) Na Width Of Additional Sink Bowl(In Mm) Na Depth Of Additional Sink Bowl(In Mm) ,Na Height Of Panel Above Counter 300±10 Height Of Panel Below Counter Na Thickness Of Stainless Steel Sheet(In Mm) 1.2 Thickness Of Sink Bowl(In Mm) 1.0 No Of Leg In Sink Built In Counter 6 Stainless Steel Structure Pipe Size 20 Dia Thickness Of Stainless Steel Structure Pipe 1.5 , Leg Operated Sanitizer Dispenser Or Foot Operated Sanitizer Dispenser Item Item Touchless Sanitizer Dispenser Type Of Dispensing Drop Mounting Type Wall Mounted Design Features Available In Touchless Sanitizer Dispenser Replaceable Liquid Bottle Sensing Range 0 - 4 Inch Rated Voltage 230V-50 Hz Material Body Material Of Touchless Sanitizer Dispenser Stainless Steel 304 Dimension Sanitizer Container Capacity (In Ml) 100-150 Dispensing Sanitizer Volume In One Use(In Ml) 10 , Sofa Set With Cushion 10Ft Material Frame Structure Material And Size (±1 Mm) Any Other Wood Of Minimum 25 Mm Thickness Seat Cusion Material Foam Density Of Cushion Of Seat Material ±3 (Kg/Cubic M) 40 Type Of Spring In The Base / Seating No Spring In The Base Generic Total Number Of Seats In The Sofa Set (Nos) 3 Type Of Sofa And Backrest Seat And Backrest Are Permanently Fixed With The Frame Structure Number Of Single Seater Units (Nos) No Single Seater Unit Number Of Two Seater Units (Nos) No Two Seater Unit Number Of Three Seater Units (Nos) 1 Number Of Four Seater Units (Nos) No Four Seater Units Frame Covering Fully Upholstered Sofa Set Is Foldable To Use As Bed No Backrest Cushion Material Foam Density Of Cushion Of Backrest Material (Kg/Cubic M) 40 Covering Material For Seat And Backrest Fabric Dimension Length Of Single Seater Units In Mm (±5 Mm) 750 Length Of Three Seater Units In Mm (±10 Mm) 3000 Depth Of Sofa Units In Mm (±10 Mm) 800 Sofa Height (Without Back Cushion) ±5 (Mm) 450 Millimeter Sofa Height (With Back Cushion) ±5 Mm 800 Millimeter Arm Width ±5 (Mm) 120 Millimeter Arm Height ±5 (Mm) 600 Millimeter Seat Height (With Seat Cushion) ±5 (Mm) 450 Millimeter Sofa Leg Height ±2(Mm) 75 Millimeter Sofa Leg Width / Diameter ±2 (Mm) 100 Millimeter Seat Cushion Length ±5 (Mm) 710 Seat Cushion Width ±5 (Mm) 510 Seat Cusion Thickness ±5 (Mm) 100 Backrest Cushion Length ±5 (Mm) 710 Backrest Cushion Width ±5 (Mm) 508 Backrest Cushion Thickness ±3 (Mm) 100 Thickness Of Foam In Arms ±2 (Mm) 50 Thickness Of Foam In Back ±2 (Mm) 76 Millimeter Thickness Of Foam In Front ±2 (Mm) 76 Millimeter Thickness Of Foam In Sides ±2 (Mm) 76 Millimeter , Wall Lamination, Decoration, Ply Running And Installation Per Feet Mdf, Paper Phenolic, Particleboard, Plywood, Baltic Russian Birch, Acrylic, Glass, Metal, Resin Panels:Thermally Fused Laminate (Tfl), Thermally Fused Melamine (Tfm), High Pressure Laminate (Hpl), Three Dimensional Laminate (3Dl), Wood Veneer, Translucent, Printed Graphic, Whiteboard, Chalkboard, Magnetic, Tackable With Installation And Its Regarding Feeting Materials Enter Rate In Running Sq Feet With Installation Feeting Chargesand Other Regarding Material , Wall Lamination, Decoration, Ply Running And Installation Per Feet Mdf, Paper Phenolic, Particleboard, Plywood, Baltic Russian Birch, Acrylic, Glass, Metal, Resin Panels:Thermally Fused Laminate (Tfl), Thermally Fused Melamine (Tfm), High Pressure Laminate (Hpl), Three Dimensional Laminate (3Dl), Wood Veneer, Translucent, Printed Graphic, Whiteboard, Chalkboard, Magnetic, Tackable With Installation And Its Regarding Feeting Materials Enter Rate In Running Sq Feet , Touchless Sanitizer Dispenser/Automatic Dispenser Item Touchless Sanitizer Dispenser Type Of Dispensing Spray Mounting Type Wall Mounted Design Features Available In Touchless Sanitizer Dispenser Built-In Sensor For Detection Of Hand,Waterproof,Battery Operated,Battery Cum Electric Operated,Anti-Interference,On/Off Button,Indicator Lamp,Speed Dispensing Of Liquid,Electric Adapter,With Battery,Liquid Filling Arrangement,Replaceable Liquid Bottle,Adjustable Dispensing Volume Sensing Range 0 - 4 Inch Rated Voltage Dc 6V,Dc 12V,230V-50 Hz Material Body Material Of Touchless Sanitizer Dispenser Abs Plastic Dimension Sanitizer Container Capacity (In Ml) 1001-1500 Dispensing Sanitizer Volume In One Use(In Ml) 5 , Flash Card 9.5 Cmx 1375 Cm (Alphabet/Fruit/Animal/Vegitable/Other) Set Of 5 Pcs , Small Board Book Set Of 5 - English - 2 To 5 Year (Domestic Aqua Animal/Birds/Wild Animals/Fruit/Vegitable/Abcd ) Any Set Of Five As Per Requirement , Abcd Chart Set Of 5 Pcs 65X55 Cm Aprrox Size (Abcd/Animal/Body Parts/Vegitable/Frouit/Animal Other) As Per Requirement , Basket Ball For Kids Type - Basket Ball Set Age - 3 To 8 Years Package Dimension - 33 X 25 X 13 Cm Ring Diameter - 14 Cm Ball Circumference - 38.5 Cm Weight - 174 Gm , Digital Infrared Thermometer Gun(High-Precision Infrared Sensor - Stable & Reliable Performance - Wide Temperature Ambience Adaptab) , Finger Tip Puls Oximeter ( Oxygen Level, Pulse Rate And Perfusion Index. It Has A Four-Colour Led Display With Adjustable Brightness And Comes With Signal Strength Display Feature.) , Fully Automatic Digital Blood Pressure Monitor( Fully Automatic Blood Pressure Monitor Operating On The Oscillometric Principle For Precise Measurements And Accurate Results. It Measures Your Blood Pressure And Pulse Rate With Easy One Touch Operation Cuff Size - Fits Arm Circumference (22-32Cm) The Device Uses Its Advanced Intellisense Technology For Comfortable Controlled Inflation Without The Need Of Pressure Pre-Setting Or Re-Inflation Even A Slight Pressure Change Can Be Detected Resulting Most Accurate Measurementalong With Blood Pressure Monitoring This Product Detects Irregular Heartbeat. It Is Loaded With Body Movement Indicator And Blinks If Your Systolic Or Diastolic Pressure Is Outside The Standard Range (Above 135 Systolic/85 Diastolic Mmhg)) , All In One Steam Vaporizer Machine For Cold And Cough With Nozzle Inhaler, Facial Sauna And Facial Steamer Machine For Adults And Kids , Hemoglobin Digital Monitor Accurately Detects Both Hb And Hct Levels Quick Hb And Hct Results Within 15 Seconds Simply Insert Strips, Apply Blood Specimen And Read Results Auto Calibration For Added Convenience No Specimen Preparation Required Low Maintenance And Quick Clean Up Urate Precise Result Equivalent To Automatic Hematology Analyser Only A Single Drop Of Fingertip Blood 10 Ul Sample Volume Required Wide Hb Measurement Range Of 5-25.6 G/Dl With Hct Range Of 15-75% Storage Maximum Test Results Portable Operated By Battery Or, Optional Ac Adapter Small And Handled For Immediate Diagnosis Ready To Use In Any Point Of Care Setting Dry Strips Hence Easy To Carry Anywhere , 3 Ply Face Mask Non Woven Disposable Face Mask Made Of Soft Non-Wove. Adjustable, Good Toughness, Good Nose Shaping, No Leakage. High-Quality Elastic Ear Loop, Stretching 19Cm, Suitable For Various Types. , 6-Inch Pre-Powdered Sterile Surgical Gloves-Box Of 50 Pairs Function:Anti-Smash, Anti-Heat, Anti-Cut, Arthritis Therapy, Anti-Static, Touch Screen, Anti-Vibration Material:Latex Aql 1.5 Colour:Blue, Violet, Black, White, Cobolt Blue Type:Powdered Or Powder Free Size:22*11*6, Xs/S/M/L/Xl Weight Of 9 Size:2.5Gsm-8Grms , Compressor Nebulizer Has An Attractive Wall-Mounting Design. The Body Is Made With Abs Plastic For Better Shock Absorption. Provides Anti-Vibration Feet. Doesnt Cause Much Noise. Comes With A Long Shelf-Life Compressor. Has An Attached Handle For Convenient Operation. , Blood Glucose Monitor With 10 Test Strips 1. Measurement Range: 1-33. 3Mmol/L 2. Blood Sample: Fresh Capillary Whole Blood 3. Blood Valume: 0. 5?L Small Blood Sample 4. Test Time: 5 Seconds 5. Operating Temperatuure: 10? To 35? 6. Automatic Alarm Clock Reminder 7. Date Management: 7, 14, 28, 60, 90 Days Averaging , Electrical Needle Syringe Destroyer/Needle Destroyer For Hospital And Laboratory Needle-Destroyers Minimize The Occurrence Of Accidental Needle-Sticks Because They Allow Immediate Removal And Containment Of The Needles, Especially If The Device Is Near The Area Of Use Provision Of On/Off Switch With Pilot Lamp Shock Proof-Main Circuit Breaker Is Provided. Portable, Compact, Handy , Pendent Lam Holder Usage/Application Laboratory Material Pvc Capacity 10L Packaging Type Box Weight Light Weight. Size 385*160*295 Mm Diameter 160 Mm , Pendent Lam Holder Material Plastic Style Classic Switch Installation Type Ceiling Colour White Brand Confident Shade Material Wood, Polycarbonate , Basics Storage Rack 7 Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 7 Shelf Type Of Product : Storage Rack , Basics Storage Rack 6 Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 6 Shelf Type Of Product : Storage Rack , Basics Storage Rack 5Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 5 Shelf Type Of Product : Storage Rack , Basics Storage Rack 4 Shelf 118X12x36 Inch 90 Kg Udl Breadth : 12 Inch Height : 118 Inch No. Of Shelves : 4 Shelf Type Of Product : Storage Rack , Rechargeable Ultra Led Torch 0.5 Watt Type : Led Torch • Material : Plastic • Color : Assorted • Rechargeable : Yes • No.Of Lumens : 60Lm • Capacity : 0.5 Watts , Mrudung / Mridangam General Shell Material Jackfruit Wood Tuning Type Lace Tuned Color Brown , Product Dimensions ?50 X 30 X 30 Cm; 6 Kilograms Batteries Included ?No Batteries Required ?No Material ?Iron And Leather Item Weight ?6 Kg , Wooden Standard Harmonium Harmonium Material Specification Reed Material Copper Material Wooden Material Of Knobs Nickled Metal Material Of Frame On The Back Keys Glass Wood Type Kail Dimension Details Length 60 Centimeter Height 20 Centimeter Width 30 Centimeter Weight 6 Kilogram General Features Types Standard Harmonium Scale Changer No Coupler Type Na Reed Set Type Na Special Reeds No Extra Notes Na No. Of Drones Na Bellow Type Seven Fold Bellow Top Body Cover No Frequency (Hz) A440 Portable Yes Keyboard With Lock No Special Keys No Number Of Keys 33 Color Brown No Of Stop Knobs 7 , Handmade Jhanjh Percussion Indian Musical Instrument Cymbal Pair (Gold) 5D , Piano Portable Keyboard 61 Keys Product Dimensions ?93 X 25.6 X 7.3 Cm; 93 Grams Batteries ?6 Aa Batteries Required. , Type Of Product: Solar Combooperating Voltage: 12Vsolar Wattage: 50W Spvbattery Include: Artheon Batteryled: Dc Ledbattery: 40Ah , Type Of Solar Module Polycrystalline Module Efficiency =15% Module Product Warranty 1 Year Charger Technology Mppt Warranty Of Pcu 12Month Output Phase Single Rated Power (Kva) 1.5 Efficiency At Stp For Linear Loading =90% Input Phase Single Nominal Battery Dc System Voltage 48 Volt Capacity Of Power Plant (Kva) 1 Battery Warranty 1 Year No Of Battery 1 Battery Capacity (Ah) 150 , Laptop Office Bag Multicolour Leather P.U. Office Bag No. Of Compartments:5 Product Dimension (Lxwxh) Cm:40X20x30 , Mobile 4 G Supported : 48Mp (F2.0) Quad Rear Camera + 8Mp (F2.2) Ultra Wide Camera + 5Mp (F2.4) Depth Camera +5Mp (F2.4) Macro Camera | 20Mp Front Camera 16.21 Centimeters (6.4-Inch) Super Amoled - Infinity U Cut Display, Fhd+ Multi-Touch Capacitive Touchscreen With 1080 X 2400 Ixels Hd+ Resolution, 412 Ppi | 16M Color Support Memory, Storage & Sim: 6Gb Ram | 128Gb Internal Memory Expandable Up To 512Gb | Dual Sim (Nano+Nano) Dual-Standby (4G+4G) Android V10.0 Operating System With 2Ghz+1.7Ghz Mediatek | Mt6768 Octa Core Processor 5000Mah Lithium-Ion Battery 1 Year Manufacturer Warranty For Device And 6 Months Manufacturer Warranty For In-Box Accessories Including Batteries From The Date Of Purchase Box Also Includes: Travel Adapter, Usb Cable And User Manual , Steel Folding Cot Steel/Iron Frame Width Of Frame +/- 5(Mm) 762 Mm Length Of Frame +/- 5(Mm) 1980 Mm Size Of Mdf Board 2100X900x17 Mm Size Of Plywood 2100X900x19 Mm , All In One Printer (Inkjet Technology Monochrome) With Adf , Stapler Big Size Half Strip All Metal Construction With Plastic Cover Quick Loading Machanism Rotating Anvil And Reload Indicator. Ideal For Frequant Stapling , Stapler Pin Big Heavy Duty Staple Pin Size 24/6 Big Staple Pin And Big Stapler Pin Use For School, Offices , Stapler Medium Size Half Strip All Metal Loading Capacity: 50/100 Pins Model: 999 Staple Used: No 10 Stapling Capacity: 20 Pages All Metal Half Strip Stapler Quality Steel Component Quick Loading , Paper Punching Machine Punching Capacity: 11 Sheets Punching Dia: 5.50 Mm Punching Distance: 80 Mm , Paper Punching Machine Medium Size Punching Capacity: 22 Sheets Punching Diameter - 5.5 Millimeters, Punching Distance - 80 Millimeters Medium Size Punch Silky Touch , Hole Diameter 5.5Mm Hole Distance 80Mm Material Metal No. Of Holes 2 Punching Capacity 36 Pages , Ice Pick(Tocha) Handle Wooden / Fibre /Plastic/Steel/ Iron Handle Size Size 4.5 , Tent House Jumbo Big Sizeextremely Light Weight Water Proof Kids Play House Tent For 10 Year Old Girls And Boys Product Dimensions Product Width 73 Cm Product Height 108 Cm Product Weight 0.4 Kg , Product Width 73 Cm Product Height 108 Cm Product Weight 0.4 Kg , Doll House Playhouse Playset Age - 3 Years+ Material - Plastic Dimensions - L 16 X B 8 X H 31 Cm , Thermos Stoneware Tea Kettle Set 1000 Ml Material Material Of Kettle Stoneware Grade Of Glass Embossed Material Of Infuser Stainless Steel Food Grade Infuser With Material Of Handle Stoneware Design Type Of Handle Fixed Artistic Design, Pattern And Logo Over Kettle Yes Artistic Design,Dimension Of Kettle Capacity Of Kettle (Mm) 1000 Wall Thckness Of Kettle (Mm) 2 Additional Items Cup And Saucer Set With Details Of Cup And Saucers Set No Of Cups And Saucers In Each Set (Nos) 2 Capacity Of Cup (Ml) 70 Wall Thickness Of Saucer 3 Overall Diameter Of Saucer (Mm) 60 Colour Of Cup And Saucer Set Na Wall Thickness Of Cup (Mm) 4 Wall Thickness Of Saucer (Mm) 60 Performance Of Kettle Suitable For Heating On Direct Flame Yes Suitable For Heating On Induction Heater Yes Suitable For Heating On Hot Plate Yes Recommended Max. Temperature For Safe Use (Degree C) 90-120 , Stainless Steel Serving Tray (Large Size) For Serving Water And Dishes Product Dimensions ? : ? 43 X 30 X 3 Cm; 330 Grams , Serving Tray Set Of 3 For Coffee/Tea/Breakfast(Printed Design) Product Dimensions ? : ? 43 X 30 X 3 Cm; 330 Grams , Tea Set Items Cup ,Soucer ,Tea Set Number Of Cup In One Tea Set 6 Pcs Number Of Soucer In One Tea Set 6 Pcs Number Of Tea Pot In One Tea Set Na Number Of Milk Pot In One Tea Set Na Number Of Sugar Pot In One Tea Set Na Material Of Tea Set Ceramic/Glass/And Other Nominal Capacity Of Tea Pot ( In Litre ) Na Nominal Capacity Of Milk Pot ( In Litre ) Na Nominal Capacity Of Sugar Pot ( In Gram ) Na Nominal Capacity Of Cup ( In Ml ) 150 Diameter Of Soucer ( In Mm ) 100 Diameter Of Cup Rim ( In Mm ) 50 Height Of Cup ( In Mm ) 50 Required Overall Length Of Tray ( In Mm ) Na Required Overall Width Of Tray ( In Mm ) Na Required Overall Diameter Of Tray ( In Mm ) Na Coller Hole Of Tray Na , Table Topglass Water Glass Lass Tableware Items Water Glass Conformity To Specification Is 1961 Product Is Bis Marked Yes Design On Glass Tableware Na Nominal Capacity Of Glass Tableware For Liquid (Ml) 300 Nominal Capacity Of Glass Tableware For Solid (Gm) Na Minimum Thickness At Any Point(Mm) 3.0 Top Diameter Of Glass Tableware(Mm) 90 Bottom Diameter Of Glass Tableware(Mm) 90, Height Of Glass Tableware(Mm) 100 Length Of Butter Dishes(Mm) Na Width Of Butter Dishes(Mm) Na , Beverage Cup, Stackable Cups, Break-Resistant Commercial Polycarbonate Glasses Table Topglass Water Glass Lass Tableware Items Water Glass Conformity To Product Is Design On Glass Tableware Na Nominal Capacity Of Glass Tableware For Liquid (Ml) 300 Nominal Capacity Of Glass Tableware For Solid (Gm) Na Minimum Thickness At Any Point(Mm) Na Top Diameter Of Glass Tableware(Mm) Na Bottom Diameter Of Glass Tableware(Mm) Na, Height Of Glass Tableware(Mm) 100 Length Of Butter Dishes(Mm) Na Width Of Butter Dishes(Mm) Na , Frame Type Free Standing Understructure Of Table Gable End And Modesty Panel Storage Provided Both Side Keyboard Tray Provided Foot Rest Not Provided Material Table Top Material Three Layer Prelaminated Particle Board(Wood Product) Of Grade Ii Type Ii Of Is 12823/Latest Gable End And Modesty Panel Material Three Layer Prelaminated Particles Board(Wood Product) Of Grade Ii Type Iii Of Is 12823/Latest Leg Material No Legs Misc Table Top Long Sides Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Table Top Plain Sides Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Gable End And Modesty Panel Plain Side Edge To Be Banded With Pvc Tape Of 2Mm Thick With The Help Of Hot Melt Glue Number Of Buffers Provided N.A Dimension Thickness Of Table Top ±2 Mm 38 Millimeter Thickness Of Gable End And Modesty Panel ±2Mm 38 Millimeter Length Of Table Top ±10 Mm 1500 Millimeter Depth Of Table ±10 Mm 850 Millimeter Height Of Table ±10 Mm 750 Millimeter Dimension Of Leg(Mmxmm) ±5Mm No Legs Storage Unit Number Of Storage Unit Provided Double Storage Width Of Storage Unit ±10Mm 400Mm Depth Of Storage Unit In Mm (±10Mm) 600 Height Of Smallest Storage Unit ±5Mm 50Mm Height Of Medium Storage Unit ±5Mm 175Mm Height Of Largest Storage Unit ±5Mm 280Mm Keyboard Tray Type Of Keyboard Tray N.A Material Of Keyboard Tray And Right Angle L-Type Supporting Bracket N.A Keyboard Adjustablity N.A Fixing Of Supporting Bracket N.A Length Of Telescopic Channe±L0mm N.A Average Weight Of Telescopic Channel ±50Gms N.A Keyboard Front Width±10Mm N.A Keyboard Depth±10Mm N.A Keyboard Height±10Mm N.A Finish Of Exposed Edges Of Keyboard Tray N.A Material Thickness Of Keyboard Tray ±1Mm N.A Footrest Material Of Footrest N.A Length Of Footrest ±10Mm N.A Depth Of Footrest ±10Mm N.A Height Of Footrest ±10Mm N.A Finish Of Exposed Edges N.A Material Thickness Of Footrest ±2Mm N.A , Table Top Glass Thickness 12Mm Type Of Glass Toughened, Heavey, Break Resistance, Smooth, , Diesel Mechanical Hopper Tipper With Three Wheeler Diesel Mechanical Hopper Tipper With Three Wheeler Generic Parametersdrawing Of The Complete Vehicle Indicating Overall Length, Width, Track And Height Will Be Provided On Demand Of Buyer Yes Vehicle Kerb Weight With Fabrication 704 Kilogram Gross Vehicle Weight 975 Kilogram Pay Load Capacity (Gvw-Vkw With Fabrication) 271 Kilogram Gradebility (Degree) 22 Maximum Speed Of Vehicle (Kmph) 60 Max Engine Bhp 9.4 Rated Rpm At Max Engine Hp 3600 Max Torque (N-M) 23.5 Rated Rpm At Max Torque 2200 Vehicle Emission Compliance Bs-Vi Vehicle Mileage (Kmpl) 26 Type Of Fuel Diesel Fuel Tank Capacity (Ltrs) (Kg In Case Of Lpg/Cng) 10.5 Engine Aspiration Natural Cooling System Liquid Anti-Air Pollution Measures Adopted Yes Electronic Control Unit (Ecu) Yes Battery Volt 12 Volt Type Of Exhaust Gas Re-Circulating System Other If Other, Mention The Type Na Lambda Sensor No Type Of Transmission Mechanical Type Of Clutch Multi Disc Wet Type Gearbox Manual No Of Forward/Speed Gears 5 Gear Ratio 26 Type Of Suspension System Hydraulic Telescopic Speedometer Yes Designation Of Front Wheel 4.5-10, 8 Periodical Renewal Designation Of Rear Wheels 4.5-10, 8 Periodical Renewal Type Of Wheel Rims Sheet Metal Type Of Steering Control Handle Bar Location Of Steering Centre Type Of Front Brakes Drum Type Of Rear Brakes Drum Head Lamp High Beam Yes Head Lamp Dipped Beam Yes Front Position Light Yes Tail / Stop Light Yes Number Plate Illumination Light Yes Direction Indicator Lights, Front And Rear Yes Parking Lights Yes Reversing Light(S) Yes Reflex Reflector Rear Yes Reflex Reflector Side(If Provided) Yes Hazard Warning Lamp (Wherever Applicable) Yes Rear-View Mirrors Yes Constructional Parameters Length Of Chassis 3145 Millimeterwidth Of Chassis 1490 Millimeter Wheelbase 2100 Millimeter Rear Overhang 1130 Millimeter Capacity Of Carrier (Cu-M) 1.25 To 2.5 Mention Capacity Of Carrier (Cu-M) 2 Tipping Facility Available Yes Tipping Angle 45 Degree Tipping Operation Hydraulic Lifting Pump , E Garbage Hydraulic Garbage E-Cart With Tipping Facility Type Of E Cart Fully Electric, Battery Operated Motor Driven For Carrying Bins Model Number Of E- Cart Maxi E Cart Colour Of E Cart Green And Blue The E Cart Must Fabricated From Good Quality Steel Properly Painted To Avoid Rusting For More Than 5 Years, Yes Name And Grade Of Steel From Which E Cart Body Framed Ms And Alloy Steel Kerb Weight Of E- Cart (Kg) 247 Kilogram Garbage Carrying Capacity (Kg) 310 Kilogram Run Distance (For A Full Charge Of Battery , To Be Tested With Full Load At Maximum Ais-040 )) (Km) 95 Number Of Bins 2 Capacity Of Individual Bins In Litres (Ltrs) 155 Liter Type Of Chassis For E Cart Tubular Ground Clearance As Per Is : 9435 (Mm) 180 Wheel Base (Mm) 2090 Millimeter Turning Radius (Mm) 2200 Millimeter Power Transmission From Motor Shaft To Wheels Direct Mounting Please Specify The Mechanical Mechanism Otherwise Put Na Na Tipping Facility Yes Tipping Angle 75 Degree Method Of Tipping Hydraulic If Others, Mention The Method Of Tipping Hydraulic Type Of Battery As Per Ais-048 Lead Acid , Ev Grade , Tubular Deep Dischargecapacity Of The Battery Approved By Icat/Arai (Ah) 110 Battery Voltage ,Nominal (Volts) 48V Maximum Overall Dimensions Of The Battery ( L X Wx H ) (Mm3) 410 X 176 X 210 Nominal Filled Weight Of The Battery (Kg) 120 Kilogram Motor Controller ( Must Suitable For Starting, Accelerating, Decelerating, Driving , And Stopping Of E Cart Yes Battery Charger 220/230 V Nominal Input Voltage , High Efficiency Type Charging Current (A) 12 Type Of Motor Brushless Dc Motor Motor Output Power ,48V/60V At Full Load (Watt) 1200 Overall Efficiency Of The E Cart ( To Be Tested At Full Load With Maximum Speed As Per Concerned Ais Standards (%) 85 Gradeability Of E-Cart , ( To Be Tested At Full Procedure As Per Ais -003 Load (Degree) 15 Constructional Seating Facility For Driver Only Length Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 2.8 Width Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct, 2014 (Meters) 1 Height Of E -Cart As Per Gazette Notification By Ministry Of Road And Transport Oct , 2014 (Meters) 1.8 Dimensions Of The Cabin Provided For Bins (Mm X Mm X Mm) (Mm3) 1500 X 900 X 1400 Size Of Front Tyre (Mm) 90 X 90 X 12 Size Of Rear Tyre 90 X 90 X 12 Brake Type (Front) Drum Brake Type ( Rear ) Drum Suspension System (Front) Shockers Suspension System ( Rear ) Leaf Spring Reverse Gear Facility Yes The Mounting Of Batteries Yes Vehicle Lighting System Filament Type Instrument Panel Containing Speedometer And Battery Charging Indicator Yes Glass Windshield With Wiper Motor As Approved By Icat/Arai Yes Battery Make As Per Ais :048:2009 Exide If Others Please Specify The Name Of Brand ,Otherwise Put Na (As Per Ais048 2009) Na Equipped With Start And Stop Button, Parking Lights , Back Lights With Reverse Gear Facility Yes Equipped With Fire Extinguisher Yes Equipped With First Aid Box Yes Yellow Color Reflective Tape On Front And Rear Side Of The E Cart Yes E Cart Integration , Yes Performance Parameters Speed Of The E- Rickshaw As Per Cmvr -2014 With Latest Amndmt (To Be Tested With Full Load ) (Kmph) 23 Battery Warranty 1 Year No. Of Free Service 1 Year Compliance Of Centre Of Gravity Of E Cart As A Compulsory Norms For Safety Yes Confirming To Applicable Environmental Test Yes Noise Level Must Be Low During Operation Yes , Diesel Bs-Vi Hopper Tipper Dumper With Capcity 2.5 Cubic Metres With Four Wheeler Generic Parameters Type Of Tipper Garbage Tipper Type Of Tipper If Other Tipper ,Please Declare Type Of Tipper, Garbage Tipper Make Of Chassis 4 Wheelr Chasis Type Of Chassis Frame Conventional Category Of Vehicle For Which Chassis To Be Used Light Capacity Commercial Vehicles Type Of Chasssis Chassis With Facecowl Type Of Fuel Diesel Vehicle Emission Complaince Bs-Vi Fuel Consumption ( Declared By Oem As Certified By Test Agency Under Rule 115Of Cmvr 1989) (Kmpl) 22Speed, Max (Km/Hr) 60Max Engine Power Bhp (Bhp@Rpm) 20Rated Rpm At Max Engine Power 3600 Max Engine Torque (N-M@Rpm) 45 Rated Rpm At Max Engine Torque 3600 Main Engine Aspiration Natural Aspiration No. Of Cylinder In Main Engine (Nos) 2 Fuel Tank Capacity (Ltrs) 30 Liter Gradeability Of Vehicle With Load( %) 13.2 Ground Clearance (Mm) 160 Millimeter Wheel Base (Mm) 2100 Millimeter Kerb Weight (Kg) 920 Kilogram Gross Vehicle Weight (Kg) 1675 Kilogram Type Of Bis Marked Vehicle Tyre Radial Chassis Transmission System Manual Number Of Speed/ Forward Gears 5 Type Of Steering Manual Turning Radius,Min (Mm) 4300 Millimeter Speed Governers/Ecu Yes Abs Fitted No Front Vehicle Brake Disc Brake Hydraulic Rear Vehicle Brake Drum Brake Hydraulic Type Of Clutch Single Plate Dry Tipping Angle (Degree) 48 Tipper Container Capacity/Volume(Cubic Metres) 2.5 Consructional Parameters Size Of Front Tyres (Mm) 145 R12 Size Of Rear Tyres (Mm) 145 R12 Size Of Wheel (Mm) 304.8 Millimeter Tipper Body Pivot Length (Mm) 1546 Millimeter Tipper Body Length (Mm) 2000 Millimeter Tipper Body Height (Mm) 670 Millimeter Overall Height Of Tipper From Ground (Mm) 1489 Millimeter Body Plate Thickness (Mm) 2 Main Frame Thickness (Mm) 3 Millimeter Hydraulic System Yes Tipping Hydraulic Cylinders(Make) Liftwell/Dantal/Eqv Hydraulic System Driven By Main Engine Tipper Container Material Mild Steel Thickness Of Sheet From Tipper Collector Container Made (Mm) 2 Millimeter Dumping Height (Mm) 550 Millimeter Engine Oil Pressure Level Indicator In Control Panel Yes Fuel Gauge Indicator In Control Panel Yes Engine Cooling Liquid Temperature Indicator In Control Panel Yes Operating Hour Meter No Locking/Unlocking Of Tipper Discharge Container Yes Lowering/Lifting Of Tipper Discharge Container Yes Counter Weight No If Yes Counter Weight (Kg) 0 Kilogram Paint Automotive Paint Performance Parameters Standard Sparewheel And Tool Kit Yes Warranty Time (Month) 12 Month No. Of Free Service (Nos) 3 Battery Warranty (Months) 12 Month Warranty Distance (Km)(Unlimited During Warranty Period) Yes , Vehicle Mountable Fogging Machine Operated Electrical Single Blor Type And Starting Of Machine Type Vehicle Mountable Starting Electrical Material Chemical Tank Material Stainless Steel Fuel Tank Material Crc Steel (Portable) Chemical Tank Material)/Thickness Stainless Steel/0.95Mm Grade X04cr19ni9 Fuel Tank (Material)/Thickness Crc Steel/1.0Mm Grade Cr4 Engine Output Engine Output (Minimum)/Chemical Discharge Capacity (Max.) (Kw/Lph) 75/160 (Vehicle Mountable) Engine Output (Minimum)/Chemical Tank Capacity (Min.) (Kw/Litres) 75/160 Engine Output (Minimum)/ Fuel Tank Capacity (Min.) (Kw/Litres) 75/20 Other Physical Characteristics Duration To Operate Without Refuel (Hrs) 1.5 Noise Level (Decibel) 109 Durability After 50 Hrs Auto Cut Off For Elimination Of Fire Accident, Non Pressurized Fuel Tank To Control Temperature Strap Test As Per Cl.8.4 Yes Standard Tools, Spares And Accessories Yes Rechargeable Battery Unit Capacity (Volts) 12 Annual Maintenance Contract For Fogging Machine (Years) 1 , Vehicle Mountable Fogging Machine Operated Electrical Single Blor Machine Type Vehicle Mountable Starting Electrical Material Chemical Tank Material Stainless Steel Fuel Tank Material Stainless Steel Chemical Tank (Material)/Thickness Stainless Steel/0.95Mm Grade X04cr19ni9 Fuel Tank (Material)/Thickness Stainless Steel/0.95Mm Grade X04cr19ni9 Engine Output Engine Output (Minimum)/Chemical Discharge Capacity (Max.) (Kw/Lph) 37/75 (Vehicle Mountable) Engine Output (Minimum)/Chemical Tank Capacity (Min.) (Kw/Litres) 37/75 Engine Output (Minimum)/ Fuel Tank Capacity (Min.) (Kw/Litres) 37/10 Other Physical Haracteristics Duration To Operate Without Refuel (Hrs) 2 Noise Level (Decibel) 102 Durability After 50 Hrs Auto Cut Off For Elimination Of Fire Accident, Non Pressurized Fuel Tank To Control Temperature Strap Test As Per Cl.8.4 Yes Standard Tools, Spares And Accessories Yes Rechargeable Battery Unit Capacity (Volts) 12 Annual Maintenance Contract For Fogging Machine (Years) 1 , Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working Machine Only ) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working + 1 Standby) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Cycle Rickshaw Garbage Container Closed Type, Box Size 12 Cft Capacity. Heavy Duty 5 Bar Frame, And Chassis Of 35X35x3.5Mm. Angle Iron With Box Fitted, Box Made Of 1.25 Mm Sheet And Manual Tilting Arrangement, Complete Painted. , Frp Indoor Merry Go Round Dimensions 44 × 44 × 44 Cm , Outdoor Merry Go Round Dimension Product Area 1500 Mm Dia Safe Play Area 2500 Mm Dia , Slide Ladder (Preschool Kit) Virgin Polyethylene And Full Arch Shape Material Slide Ladder Made Up Of Virgin Grade Polyethylene Plastic Virgin Polyethylene Bolts Quality (To Provide Greater Stability To Slide) To Provide As Per Approved Advance Sample Dimension And Mass Overall Length Of The Product (When Assembled) 2415Mm Overall Width Of The Product (When Assembled) 965Mm (Stare Supporting Base) And 432 Mm (Sliding Part) Length Of Sliding Part 1829 Mm Length Of The Stair Panel 1270 Mm Step Rise Of Each Stair 445 Mm Long Minimum Overall Plastic Weight Of Product 16 Kg , Adjustable Basketball Kids Multicolor Assembly Required ?Yes Batteries Required ?No Batteries Included ?No Material Type(S) ?Plastic Remote Control Included? ?No Color ?Red; Blue Product Dimensions ?35 X 45 X 25 Cm; 7.87 Kilograms , Jeevan Drop 100 Ml Sodium Hypochlorite Solution , Tablet-Processor Qualcomm® Snapdragon™ 429 Processor (4 Cores, 4X A53 @2.0 Ghz) Operating System Android 9 Display Type 25.65Cms (10.1) Hd (1280X800) Ips 300Nits Memory 3 Gb Soldered Lpddr3 Hard Drive 32 Gb Emmc Warranty 1 Year On Tablet, 6 Months On Accessories (Carry-In) Ac Adapter 10W Voice Service Voicecall Graphics Integrated Qualcomm® Adreno 504 Graphics Battery Integrated 4850Mah Camera Front 2.0Mp + Rear 5.0Mp Wireless 4G Calling + Wifi Volte & Bluetooth® 4.2 , Ro 15 Ltr Performance Parameters Maximum Input Water Tds Allowed To The System 2000 Type Of Water Purification Technology Ro Aavailability Of Sediment And Activated Carbon Filter Yes Operation Fully Automatic With Auto Cut Off Conformity To Standard For Ultraviolet System Is 14724 (Latest) For Water Purification System Recovery At 27 Degree Centigrade 30-40 Output Water Forming Standard Is 10500 (Latest) Filtration Capacity In Liter/ Hour 15 Provision Of Arsenic Removal Yes Provision Of Floride Removal Yes Provision Of Chloride Removal Yes Alkaline Filter No Storage Tank Inbuilt Type Of Out Put Water Storage Tank Abs Food Grade Storage Tank Capacity (Storage Tank External For Higher Capacity If Required To Be Arranged By Buyer) 8Ltr Minimum Inlet Pressure 0.6 Kg/Cm2 Maximum Inlet Pressure 3.5 Kg/Cm2 Maximum Inlet Temperature 40 Degree Digital Display No Real Time Tds Display No Real Time Ph Display No High Pressure Pump Yes Raw Water/Chemical Raw Water/Chemical Cleaning Pump Yes Micron Filter Yes Total Dissolved Solids Removal Percentage From Ro Membrane 90% Particulate Filter Porosity 20 Micron Pressure Vessel Sand Filter No Pressure Vessel Carbon Filter Yes Pressure Vessel Dual Media Filter No Membrane Housing Yes Body Of Filter Abs Food Grade Auto Cut Yes Number Of Candles 5 Power Supply 230 Volt Single Phase Installation Type Wall Mounted , Mothe Patele 5 Kg Capacity , Mothe Patele Zakan , Sarata Motha , Chamcha Motha , Plate For Break Fast Ss Food Grade , Mothi Parat , Chhoti Parat , Glass , Water Jar , Handa 10 Ltr , Water Tank 50 Ltr Steel , Fruit Set For Kids , Vegitable Set For Kids , Office Table 4X2 , Office Fibre Chair , Abcd Chart Set Of 5 (Abcd, Number, Animal, Flower, Vehicle) , Hand Wash Station 3 Stand Material Ss Grade Ss304,Ss316,Etc. Length 4-5 Feet Width 2-3 Feet Ss Sink 3 Nos Foot Operated Number Of Tap 3 , Sanitary Pad General Napkin / Pad Consists Of Outer Covering With Sufficient Number Of Channels For Leak Protection Yes Type Of Napkin Large With Tab Napkin / Pad Shall Have A Non-Absorbent Barrier On One Side Which Shall Have An Identifying Thread Or Marking Indicating Clearly The Side Of The Barrier Yes Adhesive Back Strip Yes Color Of Pad White Soft,Comfortable,Breathable,Odorless , Anti-Bacterial , Non-Allergic And Bio-Compatible,Bio-Degradable Yes Ph Of The Absorbent Material Of The Napkin As Per Is : 1390-1961 Yes Absorbency With Prescribed Fluid @50 Ml/Min Instead Of 30 Ml Of Cl 5 (1) Of Is : 5405/1980 (First Revision) Reaffirmed 2012, With Amendment 1, Without Leakage On Bottom And Sides Yes Disposability - Disposable Napkin /Pad With Covering Removed Shall Dis Integrate In The Water In Not More Than 5 Minutes When Immersed In 15 Litres Of Water And Stirred Yes Instructions Indicating Removal Of Non-Absorbent Barrier Before Flushing Of Napkin Yes Standard Conformity To Indian Standard Is: 5405-1980(Latest) Except For Absorbency And Size Yes Product Is Bis Marked No Cm/L No(If Product Is Isi Marked) 0 Dimensions Size Of Napkin (Length X Width X Thickness) (In Mm) (240+-10)X (75+-5) X (10 +-1.5) Weight Of Single Pad (In Grams) 10+-1 The Thickness Of The Pad Shall Be Average Of The Height Measured By Stacking 10 Complete Pads Yes Napkin / Pad Should Have Uniform Thickness Throughout Without Any Wrinkle Or Distortion Yes Material Material Of Outer Cover/Layer Rayon Absorbent Filler Material Cellulose Pulp Absorbent Filler Shall Be Free From Lumps, Oil Spots, Dirt Or Foreign Material Yes The Covering Of The Absorbent Filler Shall Be Of A Good Quality Poly-Perforated Film Sleeve, Gauze Or Non-Woven Fabric With Sufficient Porosity To Permit The Assembled Pad To Meet The Bsorbency Requirement Yes If Cotton Gauze Is Used For Covering Of The Absorbent Filler, It Shall Conform To Is 758-1975 Na , Automatic Sanitiser Dispenser Machine With Battry Branded 5 Ltr (Blue Mount/Dolphy/Euronics) , Alcohol Based Hand Sanitizer/Hand Cleanser 5 Ltr Can Hand Rub Contains Glycerol-1.45%,Hydrogen Peroxide I.P.- 0.125% V/V,Ethanol 60-95% W/W Conformity To Standard Ip , Composition Ethanol Form Of Supply Liquid Shelf Life (In Months) From The Date Of Manufacturing 36 Efficacy Of Killing ~ 100% Germs After Contact Yes Hand Rub Shall Be Clear And Colorless Yes Hand Rub Shall Not Have Any Unpleasant Odour Or Smell Yesspecial Precaution For Storage Room Temperature Special Warnings And Precautions For Use Stay Away From Eyes , Sodium Hypochlorite 50 Kg Can Sodium Hypochlorite Solution (Grade 1) Conforming To Indian Standard Is 11673(Latest) Yes Whether Isi Marked No Cm/L Number(Must Declare,If Isi Marked) Na Food And Drug License Available No Test Report Details Availability Of Test Report From Central Govt/Nabl/Ilac Accredited Lab To Prove Conformity To Specification Yes Test Report To Be Submitted To The Buyer On Demand Yes Food And Drug License Number(Write Na ,If Not Available) Ad/006 Physical Characteristics Form Liquid Colour Pale Yellowish Green Requirements For Sodium Hypochlorite Solution Relative Density(At 25?/25?C) 1.18 Available Chlorine Percent By Mass By Volume 10 Total Chlorine Percent By Volume(As Cl) 10 Free Alkali (As Naoh) (Min)G/L 1 Free Sodium Arbonatena2co3 (Max)G/L 0.5 Iron(As Fe)(Max) Ppm 0.4 Sodium Chlorate 0.05 , Shoes Stand , Dustbeen 10 Ltr , Rocker For Kids - Multi-Color Plastic Horse Ride-On Toy For Kids 0 To 5 Year Material:- This Rocker For Kids Is Made Up Of Non-Toxic Harmless Plastic. , Longevity: These Playgro Rockers For Kids Are A Standout Toy For Both Its Quality And Its Longevity And Is 100% Manufactured In India. High Precision: The Parts Of This Kids Rocker And Ride Are Made Using High Precision Machines. , Kids Toy Tricycle With Heavy Iron Pipe & Plastic Product Type Tricycles For Kids Age 6-12 Months;12-24 Months;2-4 Years Ideal For Infants Color N/A Material Plastic;Iron Power Required Yes Product Dimension 55 Cm X 38 Cm X 59 Cm , Tower Block Game Set For Children To Learn Shapes, Colours And Sizes Keeps Kids Engaged By Building Various Structures Safe For Toddlers To Use; Tested In An Nabl Accredited Lab Against 72 Different Safety And Performance Parameters Is9873 Certified Product Meets Quality And Safety Standards Ideal For Homeschooling, Playgroups And Kindergarten Made In India , Shoes Stand Plastic Made , Play Ball (Set Of 10 Ball ) With Different Colours Suitable For Kids Age 0 To 6 Years , Diesel Mechanical Hopper Tipper With Three Wheeler Certification Arai/Vrde/Icat Chassis Certification Arai/Vrde/Icat No Aaon 0406 F01 Form 22 A - For Compliance With Pollution Standards, Safety Standards Of Components And Road Worthiness As Per Cmvr Rules Yes Registration To Local Rto (Regional Transport Office)/Rta(Regional Transport Authority) By Seller Yes Generic Parameters Drawing Of The Complete Vehicle Indicating Overall Length, Width, Track And Height Will Be Provided On Demand Of Buyer Yes Vehicle Kerb Weight With Fabrication 700 Kilogram Gross Vehicle Weight 974 Kilogram Pay Load Capacity (Gvw-Vkw With Fabrication) 496 Kilogram Gradebility (Degree) 23.8 Maximum Speed Of Vehicle (Kmph) 60 Max Engine Bhp 9.4 Rated Rpm At Max Engine Hp 3600 Max Torque (N-M) 23.5 Rated Rpm At Max Torque 2200 Vehicle Emission Compliance Bs-Vi Vehicle Mileage (Kmpl) 30 Type Of Fuel Diesel Fuel Tank Capacity (Ltrs) (Kg In Case Of Lpg/Cng) 10.5 Engine Aspiration Natural Cooling System Liquid Anti-Air Pollution Measures Adopted Yes Electronic Control Unit (Ecu) Yes Battery Volt 12 Volt Type Of Exhaust Gas Re-Circulating System Cooled If Other, Mention The Type Na Lambda Sensor Yes Type Of Transmission Mechanical Type Of Clutch Multi Disc Wet Type Gearbox Manual No Of Forward/Speed Gears 5 Gear Ratio 26 Type Of Suspension System Spring With Damper Speedometer Yes Designation Of Front Wheel 4.50-10.8Pr Designation Of Rear Wheels 4.50-10.8Pr Type Of Wheel Rims Sheet Metal Type Of Steering Control Handle Bar Location Of Steering Centre Type Of Front Brakes Drum Type Of Rear Brakes Drum Head Lamp High Beam Yes Head Lamp Dipped Beam Yes Front Position Light Yes Tail / Stop Light Yes Number Plate Illumination Light Yes Direction Indicator Lights, Front And Rear Yes Parking Lights Yes Reversing Light(S) Yes Reflex Reflector Rear Yes Reflex Reflector Side(If Provided) Yes Hazard Warning Lamp (Wherever Applicable) Yes Rear-View Mirrors Yes Constructional Parameters Length Of Chassis 3145 Millimeter Width Of Chassis 1490 Millimeter Wheelbase 2100 Millimeter Rear Overhang 735 Millimeter Capacity Of Carrier (Cu-M) 1.25 To 2.5 Mention Capacity Of Carrier (Cu-M) 2 Tipping Facility Available Yes Tipping Angle 45 Degree Tipping Operation Hydraulic Lifting Pump , Fogging Machine Single Blor Type And Starting Of Machine Type Portable Pulse Jet Type Starting Manual Material Chemical Tank Material Hdpe Fuel Tank Material Hdpe (Portable) Chemical Tank (Material)/Thickness Hdpe Density:0.935G/Cc,Polymer Content 99.45% Fuel Tank (Material)/Thickness Hdpe Density:0.935G/Cc,Polymer Content 99.45% Engine Output Engine Output (Minimum)/Chemical Discharge Capacity (Max.) (Kw/Lph) 10/20 (Portable) Engine Output (Minimum)/Chemical Tank Capacity (Min.) (Kw/Litres) (10/17.5)/5 Engine Output (Minimum)/ Fuel Tank Capacity (Min.) (Kw/Litres) 10/1.2 Other Physical Characteristics Duration To Operate Without Refuel (Hrs) 1 Noise Level (Decibel) 102 Durability After 50 Hrs 50 Strap Test As Per Cl.8.4 Yes Standard Tools, Spares And Accessories Yes Rechargeable Battery Unit Capacity (Volts) 12 Annual Maintenance Contract For Fogging Machine (Years) 1 , Sanitary Pad Vending Machine General Type Of Machine Automatic Type Of Fitting Wall Mountable Color Others Napkin Size For Loading Extra-Large Napkin Fold Trifold Operating Features Coin Operated Multiple Coins Accepted Yes Number Of Napkins/Pads Provided/Loaded With The Vending Machine 35 Multiselection Of Napkin Type Yes Number Of Selection Options 1 Vending Option Vertical Accessibility For Free Vending Utility Service Token Type Of Loading Spiral Vending Napkin Individually Packed Yes Led Illumination Provided For Visibility Of Napkins In The Machine No Visibility Window Yes Pre-Programmable Facility Available Yes Maximum Storage Capacity (Nos)(Nos) 25-50 Digital Counter For Accounting Yes No Stock Message Display Available Yes Built-In Program For Automatic Coin Return/Reject System When There Is No Stock Or No Power No Built-In Program For Automatic Currency Block/Reject System When There Is No Stock Or No Power No Built-In Price Programming Software For Changing The Price Yes Sales Data Retrieval Yes Any Additional Built-In Features Available Easy Access To Use Functional Features Material Of The Outer Body Mild Steel(Ms) Type Of Battery Na Built-In Charger No All Ms Parts Are Duly Painted By Powder Coating Mode Of Function Stand Alone Operating Power Source Electronic Input Power Supply 220V +/- 10%, 50Hz, Single Phase Ac Battery Backup Available No Battery Backup Time (Hrs) Na Power Consumption(Watt) Na Dimensions Width (Mm) 100-200 Depth (Mm) 200-400 Height (Mm) 800-1000 Weight (Kg) 10-20 Thickness Of Ss/Ms Sheet (Mm) 1.2 Thickness Of Frp/Plastic Sheet (Mm) 1-2 , Sanitary Pad Disposal / Incinerator Machine General Type Floor Mountable Purpose Burn Used Sanitary Napkins To Sterile Ash And Stop Automatically Color Operation Mode Electronically Operated, Fully Automatic Loading Type Top Loading Stand Provided Yes Number Of Chambers Two Trap Door Available Yes All Ms Parts Powder Coated Yes Spare Parts Should Be Available For Minimum 5 Years From Date Of Supply Yes All Electrical Parts Are Isi Marked Yes Dimensions Of Main Unit Thickness Of Thermal Insulation Material (Mm) 40 Millimeter Thickness Of Ms/Ss Sheet Of Housing Cabinet (External) (Mm) 1.2 Millimeter Thickness Of Ms/Ss Sheet Of Burning Chamber (Internal) (Mm) (Min) 3 Millimeter Machine Width(Mm) 401-500 Machine Depth (Mm) 501-700 Machine Hight(Mm) 901-1200 Machine Weight(Kg) 51-250 Door Width(Mm) 500-100 Door Height(Mm) 151-200 Thickness Of Door Including Insulation (Mm) 25 Millimeter Internal/Burning Chamber Shape Vertical Cylindrical Flexible Emission Outlet Pipe Dia (Mm) 76 Millimeter Detachable Ash Tray Length (Mm) 301-400 Detachable Ash Tray Width (Mm) 151-200 Detachable Ash Tray Height (Mm) 31-50 Stand Height (Mm) 500 Millimeter Stand Width (Mm) 200-300 Stand Depth (Mm) 100-200 Material Of Machine Unit Material Of Housing Cabinet (External) Mild Steel(Crca) Sheet Material Of Burning Chamber (Internal) Stainless Steel Sheet Of Ss-304 Grade Finish Of Ms Parts Of Cabinet Na Material Of Thermal Insulation High Density Ceramic Fiber Sheet Constructional Features Thermal Insulation Of Burning Chamber Housed In Outer Chamber Yes Burning Chamber Tray Provided Yes Emission Outlet Pipe Location Top Of Machine Means Of Connecting The Unit Outlet With Flue Gas Emission Pipe Flanged Type Of Door Lock Provided Latch Lock Control & Functional Features Temperature Indicator Provided Yes Timer Provided Yes Auto Cut-Off Temperature Display Yes Digital Display To See Actual And Set Temperature Yes Minimum Burning Temperature (Degree C) 800 Burning Capacity Per Day (Number Of Napkins) 700-1000 Burning Capacity At A Time (Number Of Napkins) 26-50 Residue Ash Per Napkin (Gms) 2 Gram Burning Time Of Full Capacity Napkins/Pads (Minutes) (Max) 30 Minute Skin Temperature Of The Unit Under Operation (Deg C) 16-20 Installation, Training, Demonstration And Plumbing Included Yes Electrical And Safety Features Automatic Digital Controller For Time Yes Automatic Digital Controller For Temperature Yes Equipment On/Off Indicator Provided Yes Power Supply 230V +/-10%, 50Hz, Single Phase, Ac Supply Electrical Power Consumption(Watt) 500-1000 Minimum Length Of Power Chord To Be Supplied Along With Machine (Mtr) 2 Meter Type Of Heater Ceramic Heater Containing Coil Power Saver (Auto Power Cut-Off) Yes Safety Mcb Provided (16A To 30A) Yes Protection Against Electric Shock When Checked As Per Is:302-1/2008 Yes Minimum Insulation Resistance (Ir) At 500 Vdc (Mega Ohm) 2 Maximum Electrical Insulation And Leakage Current As Per Is:302-1/2008, (Ma) 0.21 Maximum Earthing Continuity Test When Tested As Per Is:302-1/2008 (Ohm) 0.1 Hv Test At 1000 V Rms For 1 Sec When Tested As Per Is:302-1/2008 No Breakdown Shall Occur During The Test Smoke Control Unit (Scu) Type Of Scu (Smoke Control Unit) Top Mounted Material Of Housing Of Smoke Control Unit (Scu) Mild Steel(Crca) Cabinet Finish Of Ms Parts Of Scu Cabinet Epoxy Anti Rust Proof Painting For Superior Finish Overall Height Of Scu (Mm) 300 Overall Width Of Scu (Mm) 100-300 Overall Depth Of Scu (Mm) 100-300 Number Of Chambers For Filteration Of Smoke Emission Two Both Carbon Control And Foul Odour Control Chambers For Filteration Of Smoke Emission Yes Number Of Filters In Carbon Control Chamber One Type Of Filters In Carbon Control Chamber Ceramic Blanket As A Filter Number Of Filters In Odour Control Chamber One Type Of Filters In Odour Control Chamber Activated Carbon Filter Blower Type Centrifugal, Direct Driven Blower Rpm 1800 Power Supply Of Scu 230V +/-10%, 50Hz, Single Phase, Ac Supply Minimum Length Of Flexible Emission Outlet Pipe To Be Supplied Along With Machine (Mtr) 3 Cost Of Additional Flexible Emission Outlet Pipe, If Required On Actuals To Be Paid By The User Yes Emission Standard For Smoke Conformity To Cpcb, Min Of Environment & Forests Standard, Solid Waste Management Rules (Swm), 2016 Yes Particulates (Half Hourly Average) (Mg/Nm3) (Max) 50 Hcl (Half Hourly Average) (Mg/Nm3) (Max) 50 So2 (Half Hourly Average) (Mg/Nm3) (Max) 200 Construction Of (Half Hourly Average) (Mg/Nm3) (Max) 100 Construction Of (Daily Average) (Mg/Nm3) (Max) 50 Total Organic Carbon (Half Hourly Average) (Mg/Nm3) (Max) 20 Hf (Half Hourly Average) (Mg/Nm3) (Max) 4 Nox (No And No2 Expressed As No2) (Half Hourly Average) (Mg/Nm3) (Max) 400 Total Dioxins And Furans ( 6 To 8 Hours Sampling Basis, Please Refer Guidelines For 17 Concerned Congeners For Toxic Equivalence Values To Arrive At Total Toxic Equivalence) (Ng Teq/Nm3) (Max) 0.1 Cd + Th + Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Hg And Its Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.05 Sb+As+Pb+Cr+Co+Cu+Mn+Ni+V+Their Compounds (Sampling Time Anywhere Between 30 Minutes And 8 Hours) (Mg/Nm3) (Max) 0.5 Loss On Ignition (Max) (% Dry Weight Of The Material) 5 , Water Cooler 60 Ltr/80 Ltr/100 Ltrtype Storage Cooling Capacity Litres/Hour 60/80/100 Liters/Hour Storage Capacity 80 /60/100 Liter Maximum Energy Consumption (Watt) 775 Watt For 60 Ltr/Hr Cooling Cap. Power Factor 0.85 Eco-Friendly (Non Cfc Refrigerant) Es Water Tank Sheet Material And Thickness Stainless Steel (Grade Aisi 304) With Puf Insulation, Thickness =0.6 Mm Water Tank Cover And Lid Bottom Sheet Material High Impact Polystrene(Hip) Water Tank Cover And Lid Bottom Sheet Thickness 1.5 Millimeter Cooler Cabinet Sheet Material Stainless Steel (Grade Aisi 304) Cooler Cabinet Sheet Thickness 0.8 Millimeter Warranty On Machine 1 Year , Ss Skid- The Basic Assembly Of Ro Is Mounted On The Skid The Quality Of The Skid Is Made Of Stainless Steel 304 -For Suitable For 1000 Ltr Ro , Raw Water Tank The Filtered Product Water Is Stored In This Tank. This Tank, Too Is Maded Pvc 4 Layer Food Grade Tank Capicity : 3000 Ltr-For Suitable For 1000 Ltr Ro , Treated Water Tank . The Filtered Product Water Is Stored In This Tank. This Tank, Too Is Maded Stainless Steel Water Tank Steel Grade 304 Food Grade Tank Capicity : 1000 Ltr. -For Suitable For 1000 Ltr Ro , Raw Water Pump The Rwp Sucks Water From The Raw Water Tank & Forwards It To The Ro System. Having Capacity Of 3000 Lit Per Hr. Of Self Priming Centrifugal Pump Its Make Of Cri/Groundfos .5 To 1Hp Power Consumption And Pressure 3-4 Kg Per Sq.Cm Etc Complete-For Suitable For 1000 Ltr Ro , Pressure Sand Filter Pressure Sand Filter Is Of Vertical Type Of Diameter 13 Inches And 54 Inches In Height Having Volume Of 110Liters (Pentair) Made Up Of Frp Its Operation Type Is Manual Multiport Valves Etc Complete -For Suitable For 1000 Ltr Ro , Pressure Carbon Filter Pressure Carbon Filter Is Of Vertical Type Of Diameter 13 Inches And 54 Inches In Height Having Volume Of 110Liters (Pentair) Made Up Of Frp Its Operation Type Is Manual Multiport Valves Etc Complete -For Suitable For 1000 Ltr Ro , Anti Scalnt Dosing System -Having Pump In A Set Made Of Edose It Is Electronic Diaphragm Type Its Capacity Is 0.3 Liter Per Minute. Having One Hdpe /Plastic Tank Capacity 80 Liters. -For Suitable For 1000 Ltr Ro , Cartidge Jumbo Filter Housing Cartidge Jumbo Filter Housing In Two Numbers Made Of Food Grade Pp And Diamentions Are 20X4 -For Suitable For 1000 Ltr Ro , Jumbo Micron Cartidge Filter 2 Nos - It Is Made Of Poly Propylene And Having Flow Rate Is 5000 Lit Its Diamentions Are 20 X 4 Its Rating Is 5 Micron In 2 Nos-For Suitable For 1000 Ltr Ro , High Pressure Pump -It Has The Power Of 3Hp It Is Vertical Centrifugal Multi Stage Pump Make Of Cri/Cnp/Shakti Hpp Sucks Water From The Micron Filter & Passes It To The Membrance. -For Suitable For 1000 Ltr Ro , Pressure Tube Ro Module Consisting Of Membrane Housing With Ro Membrane Mounted On Skid It Is Made Of Ecoline (Penteir)Uki/Ss Its Size Is 8X40 In A One Number -For Suitable For 1000 Ltr Ro , R.O Membrane The Membrane Contains Minute Holes Of Size 0.0001 Micron.As A Result No Bacteria Or Any Virus Can Pass Through This It Its Tfc Polymide And Size Is 40 Diameter And 40 Length Make Of Hydronautics Cpa-2 Equivalent -For Suitable For 1000 Ltr Ro , Flow Indicator Flow Indicators In Two Numbers Made Up Of Flot Type Pannel Mountedits Max Temp 40 Degree Cal.And Measured At Ro Module Product Flow And Ro Module Reject Flow-For Suitable For 1000 Ltr Ro , Pressure Gauge -Pressure Gauge Are In Two Nos And Range In Between 0 To 20 Kg / Sq Cm Its Location Are At Ro Module Inlet And Ro Module Reject Flow-For Suitable For 1000 Ltr Ro , High Pressure Switch And Low Pressure Switch- These Are In Two Numbers Locations Are One Before High Pressure Pump And Another Is After. -For Suitable For 1000 Ltr Ro , Pressure Controlled Valvex -These Are In Two Numbers Locations Are One Before High Pressure Pump And Another Is After.-For Suitable For 1000 Ltr Ro , Flushing Switch With Solenoid Valve-Size : 3/4 Inch Working 230Volt Ac.-For Suitable For 1000 Ltr Ro , Electronic Panel Board - The Mains Supply Is Connected To The Panel Board. The Ro Is Controlled By The Panel Board. -For Suitable For 1000 Ltr Ro , Water Dispenser Machine(Water Atm)- (Atm)Aster Make With Digital Panel & Control Sensor And 100 Scratch Cards-For Suitable For 1000 Ltr Ro , Supplying Of Water Controller Sensor (Flot Type) At Site As Directed By Incharge Of Work. -For Suitable For 1000 Ltr Ro , Multiport Valve - Supplying Of Multiport Valve Manually Operational Required For The Pressure Sand Filter Including All Charges At Site As Directed By Incharge Of Work -For Suitable For 1000 Ltr Ro , Other Accecories - Providing Walls/ Ceiling/Floors, Medium C.P.V.C. (Chlorinated Poly Vinyl Chloride) Pipe Having Embossed Isi Mark On It, Of Required Diameter With Screwed / Plain Sockets, Joints, Necessary C.P.V.C. And Brass Fittings Such As Sockets, Back Nuts, Elbows, Bends, Tees, Reducers, Enlargers, Plugs, Clamps Etc. - For Suitable For 1000 Ltr Ro , Water Level Switch Providing Ball Cock Medium Type With Pvc Float Including Sockets And Necessary Fittings And Tested As Per Municipal Requirement, Testing Etc. Complete. 40Mm-For Suitable For 1000 Ltr Ro , Chiller -Cooling Capicity : 300 Lph Working Tempreture 25Degree To 15 Deegree.Cerculation Pump. Chiller Ms Stand. Working Full Automatic. Dry Run Indication - For Suitable For 1000 Ltr Ro , Stabilser -Working Up To Volt Single Phase 160V To 260V. 15Kva -For Suitable For 1000 Ltr Ro , Chiller Plumbing -Pvc Pipe Suitable Of 1000 Ltr Ro And Chiller -For Suitable For 1000 Ltr Ro , Green And Blue Garbage Tri-Cyle Rickshaw Color Green And Blue Seating Capacity 1 Maximum Run Unlimited Usage/Application Waste Collection Size/Dimension 250 Litre X 2 , Standard Aluminium Anodized Crutch Under Arm Crutches 1 Pieces Constructional Parameters Type Of Crutches Crutch Under Arm Crutch Tips Size 7/8 Inch Size Type Standard Size In Centimeter 60 Centimeter Material Of The Type Selected Aluminium Anodized Performance Parameters Type Of Hand Grip Na Height Of Rod Adjustable Upto (Centi Meter) 100 Centimeter Fitted With Non - Slip Rubber Shoe Yes Adujstable Rod Type Yes , Medium Aluminium Crutch Elbow Or Forearm Crutches 1 Pieces Constructional Parameters Type Of Crutches Crutch Elbow Or Forearm Crutch Tips Size 3/4 Inch Size Type Medium Size In Centimeter 50 Centimeter Material Of The Type Selected Aluminium Performance Parameters Type Of Hand Grip L Height Of Rod Adjustable Upto (Centi Meter) 86 Centimeter Fitted With Non - Slip Rubber Shoe Yes Adujstable Rod Type Yes , Plastic First Aid Kit With Medicines Crepe Bandage (Unit-1, Size: 6 Cm) Adhesive Bandage (Unite-1) Adhesive Bandage Round 25Mm (Unite-1, Size: 25 Mm) Pain Relief Gel (Unite-1) Povidone Iodine Ointment(Unite-1) Oral Clinical Thermometer (Unite-1) Antiseptic Liquid (Unite-1) Absorbent Cotton I.P. (Unite-1) Microporous Surgical Tape (Unite-1) Paracip/Parachoice (Unite-1) Gauze Swab (Unite-1) Roller Gauze Unite-1, Size: 7.5 Cm) A Pair Of Scissors (Unite-1, Size: Small) First Aid Leaflet Sticker (Unite-1) , Mortuary Cabinet Freezer Door Material Stainless Steel Refrigeration System- Unitary Type Rtu-06 Number Of Bodies 1 Trolley Material Stainless Steel Body Material Stainless Steel Technical Specification Integral Temperature Gauge Yes Electronic Temperature Indicator Cum Controller No Separate Doors And Handles For Each Chamber Yes Refrigerant Gas R134a Temperature Display Led Temperature Of Mortuary Cabinet(Degree Celsius) -15 Degc To 10 Degc Internal Lighting Vapor Proof Incandescent Lamp Insulation Thickness 50 Millimeter Locking System Standard Key Locks Trolley Sliding On Telescopic Rails No Defrosting Type Na Safety Alarm Visual Insulation Between The Walls High Grade Polyurethane Type Of Alarm Temperature Variation Alarm Internal Drainage Yes Air Circulation Forced Air Circulation Power Suppy Voltage,+/-10% 230 Volt Phase Single Phase Frequency 50 Hertz Dimension & Size Height 800 Millimeter Width 800 Millimeter Height With Cooling Unit And Plain Cement Concrete Platform 800 Millimeter Depth 2000 Millimeter , Pre School Uniform For Girls And Boys Including Tie , Socks And Shies In Anganwadi Center (Check Pattern In Colours As Per Buyers Requirements Description Pinafore With Embedded Collar And Sleeves For Anganwadi, Preschool Childrenutility Girls And Boys Size ( 1 To 5 Yrs Kids ) Dimensions And Pattern As Per Sketch And Dimension Chart For Icds Pre-School Uniforms- Pinafore With Embedded Collar And Sleeves For Children Of Anganwadi Centers In Mharashtra , Sketch And Dimensional Chart For Pre School Uniform- Pinafore Has Been Seen And Understood Yescollar Reinforcement With Reinforcementopening Opening At Back Upto Waist Portion With Buttonsbelt At Waist Portion As Per Buyers Requirementsnumber Of Loops For Belt2 Material-Pinafore Fibre Composition (Warp & Weft) Polyester Staple Fiber ( Psf ) - 70% And Viscose - 30% ( Tolerence ± 5% ) ( Test -Method Is: 3416 , Part - 1 ) Count Of Yarn, Warp (Ne) 2/30S ( Tolerence ± 5% ) ( Test Method - Is: 3442 ) Count Of Yarn, Weft (Ne)15S ( Tolerence ± 5% ) ( Test Method - Is: 3442 ) No Of Threads, Warp ( Ends Per Inch )46 (Tolerance + 5% / - 2.5%) No Of Threads, Weft ( Picks Per Inch ) 46 (Tolerance + 5% / - 2.5%) Mass ( Gram Per Sq Mtr ) 145 To 150 Gram ( Test Method - Is : 1964 ) Weave Plain Material- Sleeves| Top Portion Including Collar ( Embedded Stitched Shirt Fabric ) Fibre Composition - Warp 100% Polyester Filament Yarn ( Pfy ) Full Dull Roto Yarn Fiber Composition - Weft White Yarns - 100% Cotton, Colour Tex X 3, Polyester Stitches Per Dm 35 To 40 Raw Edges, If Any Shall Be Bound By Overlock Stitching Yes Colour Of Pinafore Any Other Colour As Per Buyers Requirement Colour/ Pattern Of Embedded Shirt Fabriccheck Pattern In Colours As Per Buyers Requirements Colour Fastness To Light Change In Colour 4 Or Better ( Test Method - Is : 2454 ) Colour Fastness To Washing Change In Colour 4 Or Better , Stain On Adjacent Fabric 3 - 4 Or Better ( Test Method - Test C (3), Is / Iso 105 - C10 ) Colour Fastness To Perspiration Change In Colour 4 Or Better , Stain On Adjacent Fabric 4 Or Better ( Test Method - Is : 971 ) Colour Fastness To Rubbing Dry 4 Or Better , Wet 3 Or Better (Test Method - Is : 766 ) Logo & Marking Logo Marking As Per Buyers Requirements Type Of Logo Embroidery Number Of Logos 2 Size, Design And Location Of Logo As Per Buyers Requirement Yes , Isi Mark Inverter Tubular Battry Battery Type: Tall Tubular Inverter Battery That Provides Many Years Of Service; Construction: Rugged Construction; Water Level Indicators: 6 Nominal Voltage: 12V; Rated Capacity At 27 Degree Celsius: 200 Ah; Electrolyte Volume: 19.90 Liter; Safety: Overload Protection With Auto Reset Dimensions Of The Container (L X W X H): 502Mm X 191Mm X 440 Mm Dry Battery Weight: 34.3Kg; Filled Battery: 59.0 Kg [Charging Current] Boost Mode Starting Current: 20.20; Boost Mode Finishing Current: 10.10;[Trickle Mode] Min: 168 Ma; Max: 672 Charging: Fast Battery Charging With Adaptive Battery Charging Control Technology Efficiency: Highly Efficient Battery Which Is Ideal For Heavy-Duty Application With Excellent Overcharge Tolerance, Superior Performance During Long Frequent Power Cuts, And Minimum Maintenance , Isi Mark Starter For 5 Hp Submersible Motor Pump Provided With 16 Amps Lt1 Type Contactor 4 Pole [Ac3 Motor Duty] With Easy Replaceable Heavy Duty Fixed And Moving Contacts And Coil Voltage Range Between 280-480 Volts With Easy Replacement Of Coil. Thermal Overload Relay Ensures Overload Protection And Manual Reset Facility [Range ?9~14 Amps For 5 Hp Motor Pump] Starter Provided With Red, Yellow And Blue Neon Bulbs For 3 Phase Power Indication. , Photo With Frame Standard Size For Office As Per Requirement Of Photo Like (Chhatrapati Shivaji Maharaj/Rajmata Jijau/Savitribai Fule/Mahatma Gandhi/Dr.Babasaheb Ambedkar Etc) , Foot Basic Sewing Machine Floral Face Plate And Arm Side Cover Round Stitch Indicator Plate Nickel Plated Needle Bar Auto Trimping Spring Loaded Bobbin Winder For Uniform Winding Of Bobbin Sheet Metal Bobbin Winder , Solar Hi Mast Complete 1 Set Of 20 Watt [20 Watt X 4 Light,Panel 75 Watt Panel X Qty, 20Ah Battery X4, 6 Hr Constand After 6Hr Dim With Motion Sensor =Total 12Hr Backup,Oct 6Mtr Pole, Foundation Bolt, Solar Panel Structure X 4, Light Arm X 4, Labour Charges, Foundation Materail, Wire] , All In One 9W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55, Ip66 Lighting Color Cool White Lumens 1170 Features Inbuilt Battery And Solar Panel Battery Capacity 12.8 V 6 Ah Maximum Lumens 1170 Pole Height5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 30W Color Temperature Range 2700K-6500K Cri 70-82 Material Typemetal) , All In One 12W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55 Lighting Color Cool White / Warm White Lumens 1560 Featuresinbuilt Battery And Solar Panel Battery Capacity 12.8 V 12 Ah Maximum Lumens 1560 Pole Height 5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 40W Color Temperature Range 2700K-6500K Cri 70-82 Material Type Metal) , All In One 15W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55 Lighting Color Cool White / Warm White Lumens 2000 Featuresinbuilt Battery And Solar Panel Battery Capacity 12.8 V 15 Ah Maximum Lumens 2000 Pole Height 5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 40W Color Temperature Range 2700K-6500K Cri 70-82 Material Type Metal) , All In One 18W Solar Street Light(Usage/Application Out Door Lighting Input Voltage 12 V Body Material Metal Lighting Type Led Ip Rating Ip55 Lighting Color Cool White / Warm White Lumens 2000 Featuresinbuilt Battery And Solar Panel Battery Capacity 12.8 V 15 Ah Maximum Lumens 2000 Pole Height 5-6 M Battery Voltage 12.8 Efficiency 95% Operating Temperature -40 C To 60 C Optical Cover Optical Lens Pv Module 40W Color Temperature Range 2700K-6500K Cri 70-82 Material Type Metal) , Sliding Glass Notice Board Color Green, Blue, Red Board Material Softboard Core,Felt Frame Material Anodised Aluminium Frame Brand Indoh Boards Board Size (Inches) 24 X 48 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Material Softboard Core,Felt Frame Material Anodised Aluminium Frame Brand Indoh Boards Board Size (Inches) 60 X 90 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Material Softboard Core,Felt Frame Material Anodised Aluminium Frame Brand Indoh Boards Board Size (Inches) 90 X 180 With Frame Yes , Isi Mark Starter For 12 Hp Motor Pump Provided With 16 Amps Lt1 Type Contactor 4 Pole [Ac3 Motor Duty] With Easy Replaceable Heavy Duty Fixed And Moving Contacts And Coil Voltage Range Between 280-480 Volts With Easy Replacement Of Coil. Thermal Overload Relay Ensures Overload Protection And Manual Reset Facility [Range ?9~14 Amps For 5 Hp Motor Pump] Starter Provided With Red, Yellow And Blue Neon Bulbs For 3 Phase Power Indication. , Belan Polpat Belan Wooden Chapati Maker Circular Board With Rolling Pin Set Wooden Circular Board Hand Made , Flash Cards Learning & Education Game For Kids Alphabets 52 Cards With Pictures , Aluminium Patila Big 110 Ltr Technical Properties Height 14 Inchgrade Nathickness Lid 2 Inchstrong Handle Withdiameter 40 Inchmaterial Stainless Steeltype Patilathickness Body 3.5 Inchcapacity 110 Liter , Iron Kadhai 150 Litre Technical Properties Thickness Of Kadhai (Mm) 6 Outer Diameter Of Kadhai (Mm) 310 Depth Of Kadhai (Mm) 50 Diameter Of Handle Rod In (Mm) 5 Capacity Of Kadhai( In Litre) 150 , Flash Cards Learning & Education Game For Kids Alphabets 52 Cards With Pictures , Alpha Numeric Plastic Leeter World -Educational Toys For 3-8 Year Olds Girls Boys, 105 Pcs See And Spell Learning Toys, Matching Letter Spelling Game Sight Words Games Educational Preschool Toys , Kids Painting Set Including 1 Mini Pre- Drawn Canvas Panel With Easel And 6 Poster Colors Set With A Painting Brush For Kids Hobby Learning Painting Drawing Art And Craft Diy Sets Gift Sets, , Ceiling Cleaning Broom/ Multi Purpose Broom Stick (Spider / Cob Web) , Magical Handwriting Workbook(4 Book) With (1 Pen+4 Refill)Pen And Refills , 6 Puzzle Board - Birds,Flower, Vegetable Fruits, Transport And Animals (Multicolor) , Flexible Long Garden Water Pipe/Pvc Pipe/Garden Outdoors Pipes With Hose Connector Per Mtr , Chalk Multicolour Writing Chalk, 50 Chalk Sticks In The Box , Chalk White Or Single Colour Writing Chalk, 50 Chalk Sticks In The Box , 36 Pieces Alphabet & Number Floor Mats For Kids, Puzzle Eva Foam Mat For Children , Portable Foldable Wheelchairs For Handicap Patient Old People Children Manual Wheelchair (Self-Propelled Wheelchair) , Vacuum Cleaner Wet And Dry 1150-Watt Powerful Suction And Blower Function , Stethoscope Exterior Finish Brass;Chrome Item Dimensions Lxwxh 26 X 13 X 3 Centimeters Material Metal , Toy Counting Frame Plastic Approx: Width320 Mmheight440 Mm , Blanket (Dimension Approx Length Of The Blanket 230 Centimeter Width Of The Blanket 150 Centimeter Mass Mass 685 Gram Mass Per Blanket 2.3 Kilogram) , Round Table With Chair Set [Front Round Table,L54 X W30 X H20,Kids Chair L13 X W15.5,H20 X 5Qty] , Magnetic Board For Kids [2 Way Board One Sude White & One Side Black Board With Magnetic Alphabets & Number L15 X W20 X H54] , Commercial Slide Ladder (Preschool Kit) Virgin Polyethylene And Full Arch Shape , Sliding Glass Notice Board Color Green, Blue, Red Board Size (Inches) 24 X 48 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Size (Inches) 60 X 90 With Frame Yes , Sliding Glass Notice Board Color Green, Blue, Red Board Size (Inches) 90 X 180 With Frame Yes , Magazine Stand Revolving Made By Iron With Powder Coated Finish. Easy To Move. Having 16 Pockets. , Curtnes For Windows Material Silk Gsm Quality 300 Material Care Machine Wash,Hand Wash,Dry Clean Lining Included Yes Color As Per Grampanchayat Choice. Patterns Plain Fitting Eyelits Per Sq Mtr , Table Top Glass Thickness 12Mm Type Of Glass Toughened, Heavey, Break Resistance, Smooth, Sqr Per Feet , Stainless Steel Serving Tray (Large Size) For Serving Water And Dishes , Serving Tray Set Of 3 For Coffee/Tea/Breakfast(Printed Design) , Head Pins Fine Satin Pin Craft, Stainless Steel, 1 1/16 Inch Single Box 100 Pcs , Stamp Pad, 110 X 69 Mm - Violet/Red /Black Small , Stamp Pad 155 X95 Mm Violet /Red /Black Small Large , Mirror Plastic Frame Mirror In Square Shape With Shelf Display Area Of Mirror Is 8 Inch By 11 Inch Appx , No Dust Broom Xl For Floor Cleaning, Long Handle Broom Stick For Home Floor Cleaning , Electrical Needle Syringe Destroyer/Needle Destroyer For Hospital And Laboratory , Iron Patient Hospital Basic Examination Table 1830 Mm (L) * 575 Mm (W) * 850 Mm (H) , Iron Patient Hospital Bed Manual White Hospital Bed, Stainless Steel/ Iron With Coted, Size/Dimension: 3 X 6 Feet , Iron Patient Hospital Bed, Dimension: 2030X900x500mm Non Adjustable With Iv Rod , Thap Dhol (S.S),17.2 Inch, Silver Steel Drum Duga Nut & Bolts Dholak , Side Drum Steel 14 Inch With Belt, Stick And 2 Fiber Sheet Free Acoustic 1 Drum Kit Set (Professional, Student) , Standard Cotton Swing For Kids Baby Jhula Washable 1-8 Years With Safety Belt , Magic Speed Rubics Cube 3 * 3 * 3Puzzle(Size 2.5 Cube) , Alcohol Based Hand Sanitizer/Hand Cleanser 5 Ltr Can , Alcohol Based Hand Sanitizer/Hand Cleanser 500 Ml Sprey Bottle , Alcohol Based Hand Sanitizer/Hand Cleanser 100 Ml Sprey Bottle , Alcohol Based Hand Sanitizer/Hand Cleanser 50 Ml Sprey Bottle , Trolley Spekar Driver Type 2 Subwoofer, 2 Atellitesbt/Usb/Sd/Fm/2 Wireless Mike , 5 Layer 30 * 30 Inch Wall Mount Modern Kitchen Utensils Dish Rack Stainless Steel Kitchen Rack Utensil Rack Utensil Stand , Baby Weight Slater ( Hanging Scale Tubular Spring Balance Dynamo Meter Up To 5 Kg With 1 Baby Hanging Bag) , Mixer Grinder 550 Watts With 3 Multi Ouroose Grinding Jars Technical Specification: Voltage Supply 230 V Ac 50 Hz Motor Wattage550 Watts... Rating 30 Minutes. . Speed Control Switch 3 Peed With An Incher. Speed 1500 (Rpm) ( No Load). Body Material Abs Plastic .. Jar Material Stainless Steel .. Blade Material Stainless Steel . Dome Material Polycarbonate .. Rated Liquidizer Jar Capacity 1.50 Ltr. Rated Grinding Jar Capacity 150 Ml ... Normal Load 150 Gm Urad Dal Well Soaked In Water , Resilient Seated Cast Iron Double Air Relief Valves For Water Works Purposes Standard Type With In-Built Isolating Valve(Ds 1) Nominal Pressures Pn 1.6 Specificationconformity To Specification Is 14845:Latest Isi Marked Yes Material Material Of Stem High Tensile Brass-Hsb1 Material Of Low Pressure Seat Ring And Face Ring Epdm Material Of High Pressure Orifice High Tensile Brass Material Of Stem Nut High Tensile Brass Material Of Body Seat Ring Stainless Steel Material Of Bolts Stainless Steel Material Of Nuts Carbon Steel Material Of Gland Packing Jute Material Of Float(High Pressure Orifice) Timber Core With Rubber Coating Material Of Float Guide High Tensile Brass Dimension Nominal Size Of Single Air Valve(Small Orifice) S1 Na Nominal Size Of Single Air Valve(Large Orifice) S2 Na Nominal Size Of Standard Double Air Valve With In-Built Isolating Valve(Ds 1) Na Nominal Size Of Standard Double Air Valve Without Isolating Valve(Ds 2) Na Nominal Size Of Kinetic Air Valve(Dk) Na Direction And Colour Direction Of Operation Clock Wise Colour Black/Blue , Resilient Seated Cast Iron Single Air Relief Valves For Water Works Purposes Standards Specification Conforming To Standard As Per Is:14845 (Latest) Whether Product Is To Be Isi Marked? Yes Cml No If Isi Marked (Write Na If Not Isi Marked) Na Generic Valve Types Single Air Valve Temperature Rating Upto 45 Deg C Maximum Permissible Gauge Working Pressure(Mega Pascal) 1.6 End Connection For Single Air Valve Screwed Type According To Is:554 End Connection For Double Air Valve Flanged Type According To Is:1538 End Connection For Kinetic Air Valve Flanged Type According To Is:1538 Size & Dimension Nominal Size Of Single Air Valve 50 Millimeter Nominal Size Of Single Air Valve 50 Millimeter Nominal Size Of Kinetic Air Valve 50 Millimeter Material Body And Component Parts As Per Clause 9.1 Of Is:14845 (Latest) Coating Material Type B Of Is:341 (Latest) Body Thickness As Per Clause 10.2.4 Of Is:14845 (Latest) Float Diameter As Per Clause 10.5.1 Of Is:14845 (Latest) Marking Marking As Per Clause - 15 Of Is:14845 (Latest) , Swing Check Type Reflux (Non-Return) Valves For Water Works Purposes Type Type Illustration Of Reflux Valve With Inclined Seating And Side By-Pass Arrangement Specification Conformity To Specification Is 5312 (Part 1) Latest Product Is Bis Marked Yes Material Material Of Body , Door , Bearing Holder Grey Cast Iron Material Of Hinge Pin , Door Pin And Door Suspension Pin Stainless Steel Material Of Body Seat Rings Stainless Steel Material Of Door Face Ring Stainless Steel Material Of Bearing Bushes/Bearing Block P.T.F.E Material Of Plugs For Hinge Pin/Air Release Plug Stainless Steel Material Of Gaskets Compressed Asbestos Fibre Material Of Hinges Malleable Cast Iron Dimension Nominal Sizes Of Reflux Valve (Mm) 350 Type Of By-Pass Valves (As Per Is 778) Class 1 For Pn 1.0 Mpa , Rod 4 Feet Zig Zag , Rod 5 Feet Regular , Rod 1 Feet Regular , Standard 28Mm Rubber Weight Plates (2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories , Dumbels Rubber Coated 2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories , Multi Bench Premium(Chest, Leg, Curl, Leg Extension )3 In One , Leg Curl / Leg Extension Main Frame: Large Rounded Rectangular Pipe,Cushion: Made Of Pu,Shroud: Metal Shroud With One Step Injection Moulding, Seat Adjustment : 5 Level Adjustment System, Adjustable Range : 0-100Mm, Guide Rail : Made Of Alloy Steel, Pulley : Made Of Engineering Aluminium, Handlebar : Pvc, Weight Plate : Alloy Steel, Guide Rod : Stainless Steel Hollow Pipe, Steel Cable : Max Load 1000 Kgs, Passes 100,000 Rounds,Weight Stacks : 110 Kgs , Bicep Curl Machine ,Pulley: Cast Iron, Ø106x20mm, With Sealed Bearing, Cable: Steel Cable Ø3.5 Jacketed With Pvc Ø5.5Mm Outside Diameter, Powder Coating: 2 Rounds (Silver/Black/Dark Grey Varnish), Tube 1: Oval Elliptical Tube, 60*120Mm T.: 3Mm, Tube 2: Round Tube, Dia 90Mm T.: 3.0Mm, Weight Stack: Made Of Cast Iron, Stuffing: Pu Foam With Synthetic Leather, Wrap Around Gas Assist Seat Adjust, Unilateral Motion, Converging Axis, Right And Left Pre-Stretch Positioning, Contoured Upholstery With Lumbar Support, Size: (L)1000*(W)1500*(H)1600Mm Stack Weight 80Kgs-N.W.: 248Kgs , Adjustable Squat Rack Stand Material Alloy Steel, Product Dimensions ?23.54D X 41.8W X 59.5H, Style ?Adjustable, Item Weight16.32 Kilograms, Number Of Racks ?2, Weight Limit?600 Pounds , Calf Muscle Machine Product Dimensions 152.4D X 61W X 48.3H Cm, Frame Material ?Iron, Weight Limit ?250 Kg , Stepper With Riser For Gym Adjustable Height In 3 Steps:15Cm, 20Cm,25 Cm, Non Slip Top Surface, Dimension: 100 X 38 X 15/20/25Cm, Weight Apx. 8 Kg , Gym Dumbbell Rack Material Iron, Product Dimensions 45D X 40W X 60H Centimeters, Style ?Multi-Level, Item Weight ?17000 Grams, Number Of Racks ?3, Weight Limit ?1000 Kg. , Weight Plates Storage Rack For Gym Material ?Iron, Product Dimensions ?68D X 57W X 119H Cm, Style Weight Plate Tree, Item Weight?2Kg, Number Of Racks 6, Weight Limit 300 Kg, Frame Type Weight Plate Tree. , Yoga Mat For Women And Men Material ?Thermoplastic Elastomers, Product Dimensions 182L X 60W X 0.6Th Cm , Submersible Pump Solar Micro Pumping System Capacity 7.5 Hp Specifications: Model Number As Per Mnre Specification Model-Ii Motor Capacity 7.5 Hp, Pv Array (Wp)M Others, Shut Off Dynamic Head 45 Meter, Types Of Motor Pump Set, Submersible Pump, Pump Set Type, A.C. Induction Motor Pump Set With A Suitable Inverter Pv Array Operation Of Spv Pumping System The Spv Water Pumping System Should Be Operated With A Required Pv Array Capacity Measured Under Standard Test Conditions (Stc). Number Of Modules In Series And Parallel Could Be Used To Obtain The Required Pv Array Power Output24 ,The Power Output Of Individual Pv Modules Used In The Pv Array, Under Stc (In Watts Peak)335, Source Of Pv Module Indigenously Produced Pv Module (S) Containing Mono/ Multi Crystalline Silicon Solar Cells Efficiency Of The Pv Module (%)17 Fill Factor For Pv Module (%)70. Types Of Motor Pump Set Submersible Pump Pump Set Typen A.C. Induction Motor Pump Set With A Suitable Inverter, Numbers Of Poles Of Motor2 Motor Speed(In Rpm)2800. Bore Size 6 Inch, Delivery Size 2.5 Inch, Suction Head For Surface Pump 6 Meter, The Suction/ Delivery Pipe (Gi/Hdpe), Electric Cables, Floating Assembly, Civil Work And Other Fittings Required To Install The Motor Pump Set Yes, Inclusive Material Of Suction Pipe,Isi Marked Hdpe Pipe To Is 4985 Length Of Suction Pipe 45 Meter, Material Of Delivery Pipe Isi Marked Hdpe Pipe To Is 4985 Length Of Delivery Pipe 45 Meter, Pump Material Construction Of The Pump Be Made Using Parts Which Have A Much Higher Durability And Do Not Need Replacement Or Corrode For At Least 1 Years.Marking On Motor Pump The Following Details Should Be Marked Indelibly On The Motor Pump Set A) Name Of The Manufacturer Or Distinctive Logo. B) Model Number. C) Serial Number. , Usb Rechargeable Electric Gas Lighter For Kitchen Gas Stove(Windproof , Flameless, Smarter , Safer -Gas Lighter Chargeable Plasma Technology Generates A Windproof Plasma Annual Rate Contract Pulse Hotter Than Fire , Low Sound, Multi-Purpose Usage To Easily And Safely Fulfill All Your Lighting Needs ; No Butane , No Flame , A Eco Friendly , Cleaner , Easier And Safer Way To Light Usb Rechargeable -Long Lighter For Candle Plazmatic Lighter Comes With The Usb Cord , Could Be Charged With Any Usb Power Port ; Gets Fully Charged In About An Hour And Gives More Than 400 Sparks Or 3 Hours Of Use Per Charge ; Excellent Battery Life ,Multipurpose Use : Flexible Gas Lighter Ideal For Gas , Candles , Kitchens , Stovetops , Grill , Barbeque , Fireplaces , Fireworks , Lanterns , Fragrance Lamps , Pipes , Camping , Outdoors And Much More) , Standard 28Mm Rubber Weight Plates (2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories Indoor Gym , Dumbels Rubber Coated Olympic 2.5Kg, 5Kg, 7.5Kg, 10Kg, 15Kg, 20Kg, 25Kg, 30Kg, 35Kg, 40Kg ) Rate Per Kg For Any Pair Without Rod And Other Accessories Indoor Gym , Multi Bench Premium(Chest, Leg, Curl, Leg Extension )3 In One Indoor Gym , Leg Curl / Leg Extension Main Frame: Large Rounded Rectangular Pipe,Cushion: Made Of Pu,Shroud: Metal Shroud With One Step Injection Moulding, Seat Adjustment : 5 Level Adjustment System, Adjustable Range : 0-100Mm, Guide Rail : Made Of Alloy Steel, Pulley : Made Of Engineering Aluminium, Handlebar : Pvc, Weight Plate : Alloy Steel, Guide Rod : Stainless Steel Hollow Pipe, Steel Cable : Max Load 1000 Kgs, Passes 100,000 Rounds,Weight Stacks : 110 Kgs Indoor Gym , Bicep Curl Machine ,Pulley: Cast Iron, Ø106x20mm, With Sealed Bearing, Cable: Steel Cable Ø3.5 Jacketed With Pvc Ø5.5Mm Outside Diameter, Powder Coating: 2 Rounds (Silver/Black/Dark Grey Varnish), Tube 1: Oval Elliptical Tube, 60*120Mm T.: 3Mm, Tube 2: Round Tube, Dia 90Mm T.: 3.0Mm, Weight Stack: Made Of Cast Iron, Stuffing: Pu Foam With Synthetic Leather, Wrap Around Gas Assist Seat Adjust, Unilateral Motion, Converging Axis, Right And Left Pre-Stretch Positioning, Contoured Upholstery With Lumbar Support, Size: (L)1000*(W)1500*(H)1600Mm Stack Weight 80Kgs-N.W.: 248Kgs Indoor Gym , Adjustable Squat Rack Stand Material Alloy Steel, Product Dimensions ?23.54D X 41.8W X 59.5H, Style ?Adjustable, Item Weight16.32 Kilograms, Number Of Racks ?2, Weight Limit?600 Pounds Indoor Gym , Calf Muscle Machine Product Dimensions 152.4D X 61W X 48.3H Cm, Frame Material ?Iron, Weight Limit ?250 Kg , Stepper With Riser For Gym Adjustable Height In 3 Steps:15Cm, 20Cm,25 Cm, Non Slip Top Surface, Dimension: 100 X 38 X 15/20/25Cm, Weight Apx. 8 Kg Indoor Gym , Gym Dumbbell Rack Material Iron, Product Dimensions 45D X 40W X 60H Centimeters, Style ?Multi-Level, Item Weight ?17000 Grams, Number Of Racks ?3, Weight Limit ?1000 Kg. Indoor Gym , Weight Plates Storage Rack For Gym Material ?Iron, Product Dimensions ?68D X 57W X 119H Cm, Style Weight Plate Tree, Item Weight?2Kg, Number Of Racks 6, Weight Limit 300 Kg, Frame Type Weight Plate Tree.Indoor Gym , Yoga Mat For Women And Men Material ?Thermoplastic Elastomers, Product Dimensions 182L X 60W X 0.6Th Cm Indoor Gym , Hbnc Kit For Asha Worker Including 1. (Baby Weighing Scale With Sling Dial Type Analogue Display Light Weight Portable 25Kg- 1Nos.). 2. (Digital Thermometer, Pocket Type, Digital Display-1 Nos.) 3.(Digital Timer, Led Display, 2 Size -1 Nos.) 4.(A Suitable Bag To Carry All Things (With Nhm Logo)- 1Nos.) 5.(Cotton 400Gm-1 Nos.) 6.( Gauzes Swab 7.5X7.5 Cm(1 Pack Of 50 Nos)-1 Nos) 7.( Soap And Soap Case-1Nos) 8.( Baby Blanket Locally Made, Woollen Type, Size 120Cm X90cm-1Nos) 9.( Palada/Spoon Stainless Steel-1 Nos) , Multicolour-4K, Matte Vinyl Stickers Educational Like (Abcd, Human Body Parts, Good Habits /Bad Habit Etc.)As Per Requirement Wall Stick Chart For Anganwadi Rate Per Sq Feet , Baby Gift Kit Items Included In The Gift Pack: 1) Baby Shampoo - 100 Ml, 2)Diaper Rash Cream - 20 Gm, 3)Baby Massage Oil - 100 Ml, 4) Gentle Baby Soap - 75 Gm, 5) Baby Lotion - 100 Ml, 6) Baby Powder - 100 Gm, 7) Gentle Baby Wipes 12 Pieces(20 X 21 Cm). Branded Himalaya/Mee Mee/Johnsons/The Moms Construction Of Etc , 1.5 Hp Table Top Atta Chakki Mini Flour Mill Specification:Weight Approx.28, Capacity Approx. 10 To 12 Kg, Stone Size 7 Inch X 20 Mm, Electric Motor 1.5 Hp Single Phase, Rpm 960 Rpm, Voltage 220 V, Power Consumption1.2 Unit, Type Semi Automatic. , Grid Connected Rooftop Solar System 1Kw Solar System Specification: Capacity1 Kw Solar Panel, Qty.335 Watt X 3 Nos., Solar Inverter1 Kw (On Grid) ,Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc. ,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Grid Connected Rooftop Solar System 2 Kw Solar System Specification: Solar System 2 Kw, Solar Panel Qty. 335 Watt X 6 Nos., Solar Inverter 2 Kw (On Grid), Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc.,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Grid Connected Rooftop Solar System 3 Kw Solar System Specification: Solar System 3 Kw, Solar Panel Qty. 335 Watt X 9 Nos., Solar Inverter 3 Kw (On Grid), Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc.,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Grid Connected Rooftop Solar System 5 Kw Solar System Specification: Solar System 5 Kw, Solar Panel Qty. 335 Watt X 15 Nos., Solar Inverter 5 Kw (On Grid), Accessories Complete Accessories Included Structure, Wires, Acdb/Dcdb, Etc.,System Warranty 1 Years, Bidder Shall Enter Their Rates Including Panels, Inverter, Structure, Wires, Inclusive Of All Taxes And Other Required Accessories Considering A Standard Bom And On Site -All Installation Charges. , Clorine Dosing Machine Without Stand By System Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working Machine Only ) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Clorine Dosing Machine With Inbuilt Stand By System Chemical Dosing System Consists Of 150 Ltr Tank Mounted On Ms Frame With Pump System With Upvc Piping. Imd-50 Flow Rate 0-50 Ltr Per Hour (1 Working Machine Only ) With Agitator Mixer Mounted On Tank Specification : 0.5Hp 3 Phase Motor With 0.5Hp Worm Gear Assemble Suitable Shaft. (System Make : Iflow) , Isi Mark Submersible Rope Yellow Borewell Submersible Pump Rope,Poly More Virgin And Braided Twisted Cord Twine Rope String (16 Mm,Per Meter Meter) , Aluminium Armoured Power Cable-50 Sq Mm 3.5 Core Product Category Aluminium Power Cable, Size Of Conductor 50 Sq Mm, Core 3.5 Core, Conductor Material Aluminium, Colour Black, Overall Diameter (Strip/Wire) 29.5 Mm / 27.9 Mm, Current Rating 140 Amp, Thickness Of Pvc Insulation 1 Mm, Min.Thickness Of Pvc Inner Sheath 0.3 Mm, Nominal Dimensions Of Armoui (Strip / Wire) 4 X 0.8 Mm, Min. Thickness Of Pvc Outer Sheath (Strip / Wire) 1.56 Mm, Max Dc Resistance Ohm 0.641 Ohm, Max. Ac Resistance Ohm 0.82 Ohm, Approx. Reactance At 50Hz Ohms/Km 0.08, Capacitance Mfd/Krr 0.24 , Stainless Steel Kitchen Pincers/Sandshi/Pakkad Style Modern, Product Dimensions 26.5L X 1W Cm, Item Weight ?160 Grams. , 1.5 Hp Table Top Atta Chakki Mini Flour Mill Specification:Weight Approx.28, Capacity Approx. 10 To 12 Kg, Stone Size 7 Inch X 20 Mm, Electric Motor 1.5 Hp Single Phase, Rpm 960 Rpm, Voltage 220 V, Power Consumption1.2 Unit, Type Semi Automatic. , Baby Gift Kit Items Included In The Gift Pack: 1) Baby Shampoo - 100 Ml, 2)Diaper Rash Cream - 20 Gm, 3)Baby Massage Oil - 100 Ml, 4) Gentle Baby Soap - 75 Gm, 5) Baby Lotion - 100 Ml, 6) Baby Powder - 100 Gm, 7) Gentle Baby Wipes 12 Pieces(20 X 21 Cm). Branded Himalaya/Mee Mee/Johnsons/The Moms Construction Of Etc , Multicolour-4K, Matte Vinyl Stickers Educational Like (Abcd, Human Body Parts, Good Habits /Bad Habit Etc.)As Per Requirement Wall Stick Chart For Anganwadi Rate Per Sq Feet , Pvc Pipe Cid Joint Rubber Ring For Pipe Line Material Rubber, Pvc Pipe, Structure Pipe, Hydraulic Pipe Brand, Bew Surface Finish, Paint Coated, Cid Joint Size Up To 1000Mm, 3 4 2.5 6 , Cast Iron Detachable Joints Material Ci Application, Pvc Pipe, Structure Pipe, Hydraulic Pipe Brand, Bew Surface Finish, Paint Coated, Cid Joint Size Up To 1000Mm, 3 4 2.5 6 , Stainless Steel Bowl/Vati/Katori-Size5- (9.5Cm Wide)(Capacity 150 Ml)