BRR : 3800265 Upgradation Of Chittur 66Kv Substation To 110Kv – Erection Ofstructures And Equipments Of 1No 110Kv Feeder And Transformer Bay.-Erection Of Yard Structures And Assembling Of Columns And Beams Using Bolt And Nuts Including Punching Holes 2 Erection Of 1 No. 110 / 66Kv Ct / Pt / Cvt / Cc / 220Kv Nct On The Already Erected Structure Of Above 1.5M Height After Opening Of Crates At The Place Of Storage, Leading To Site Carefully Keeping At Vertically Not Allowing Tilting From Vertical Position More Than The Specified Angles, Keeping Lines And Levels As Per The Direction Of The Departmental Officers, Including All Labour Charges, Hire Charges Of Tools& Tackles Etc. 3 Erection Of 1 No. 110 / 66Kv Ct / Pt / Cvt / Cc / 220Kv Nct On The Already Erected Structure Of Above 1.5M Height After Opening Of Crates At The Place Of Storage, Leading To Site Carefully Keeping At Vertically Not Allowing Tilting From Vertical Position More Than The Specified Angles, Keeping Lines And Levels As Per The Direction Of The Departmental Officers, Including All Labour Charges, Hire Charges Of Tools& Tackles Etc. 4 Erection Of 1 No. 11Kv Ct / Pt / 11Kv Nct On The Already Erected Structure After Opening Of Crates At The Place Of Storage Leading To Site Carefully Keeping At Vertically Not Allowing Tilting From Vertical Position More Than The Specified Angles, Keeping Lines And Levels As Per The Direction Of The Departmental Officers. 5 Erection Of 1 No. 110 / 66Kv La / Post Insulator On The Already Erected Structure After Opening Of Crates At The Place Of Storage Leading To Site Carefully, Keeping Lines And Levels As Per The Direction Of The Departmental Officers. 6 Erection Of 1 No. 11Kv La ( Station Type ) / 11Kv Post Insulator On The Already Erected Structure After Opening Of Crates At The Place Of Storage Leading To Site Carefully, Keeping Lines And Levels As Per The Direction Of The Departmental Officers. 7 Unpacking Carefully And Leading One Set Of 3 Pole Eht110 / 66Kv Circuit Breaker From The Place Of Storage, Including Support Structure, Mechanism Box Compressor, Pipe Lines Etc. To Site, Cleaning And Erecting On Foundation Using Suitable Lifting Tools, After Disassembling Necessary Parts If Required, To Lines And Levels And Assembling All The Parts, Connecting Mechanism Etc. In Complete Shape And Making Ready For Commissioning As Per The Direction Of Departmental Officers. 8 Erection Of One Set 110 / 66Kv Bus Isolator On The Already Erected Structure Including Opening Crates And Conveyance Of All Accessories From The Place Of Storage To The Place Of Erection To Lines And Levels, Erection Of Mechanism Box , Checking Operation And Aligning Properly, Including Cutting, Welding Etc.Complete As Per The Direction Of Departmental Officers. 9 Erection Of One Set 110 Kv Line Isolator On The Already Erected Structure Including Opening Crates And Conveyance Of All Accessories From The Place Of Storage To The Place Of Erection To Lines And Levels Including Erection Of Mechanism Box Checking Operation And Aligning Properly As Per The Direction Of Departmental Officers. 10 Providinginterconnection Between Equipments Using Acsr Moose / Kundah / Wolfsingle Conductor At Both Ends With Compressed / Bolted Ends Including Uncoiling And Cutting Of Conductor As Per The Direction Of Departmental Officers. 11 Providing Droppers And Connecting To Lines / Equipments Or Jumper Between Two Buses Without Suspension Insulators Using Acsr Moose / Kundah / Wolfsingle Conductor At Both Ends With Compressed / Bolted Ends Including Uncoiling And Cutting Of Conductor As Per The Direction Of Departmental Officers. ( For One Phase ) 12 Providing Droppers And Connecting To Lines / Equipments Or Jumper Between Two Buses With Necessary Suspension Insulators For 33Kv / 66Kv / 110Kv / 220Kv Using Acsr Moose / Kundah / Wolfsingle Conductor At Both Ends With Compressed / Bolted Ends Including Uncoiling And Cutting Of Conductor As Per The Direction Of Departmental Officers. ( For One Phase ) 13 Laying Of Departmentally Supplied Gi Strip / Copper Strip Of Suitable Sizeincluding Cleaning And Neatly Bending Of Strips, Cutting, Removing Of Metal / Earth In The Yard And Burying Earth Strip To The Required Depth Re-Doing The Yard Metalling As Per The Direction Of The Departmental Officers. 14 Welding One End Of The Bended Gi Strip Of Size 50X6mm With The Riser Of The Already Laid Earth Mat, Welding 150Mm In Length, 6Mm Thick On Both Sides & End Of The Strip & Other End Of The Strip With Yard Structure At 2 Points 50Mm Apart Each Welding Points Having 50Mm Length And 6Mm Thick On Both Sides & End Of The Strip Including The Charges For Connecting The Strip With Structure Using Bolted Joints As Per The Directions Of The Department Officers. Charges Includes Hire Charges Of Dc Arc Welding Set, Current Charges, Cost Of Low Hydrogen Content Dc Arc Welding Electrodes ( No.E7018 ) Cost Of Anti Corrosive Paint Etc. Complete. 15 Welding Overlapping Joints Of 50X6mm Gi Strip With 50Mm Long, 6Mm Thick Welding On All Three Sides After Doing 2 Nos. Bolted Joints At The Centre As Specified After Cleaning The Surface. Charges Includes Hire Charges Of Dc Arc Welding Set, Current Charges, Cost Of Low Hydrogen Content Dc Arc Welding Electrodes ( No.E7018 ) Cost Of Anti Corrosive Paint Etc. Complete. 16 Welding One End Of The Bended Gi Strip Of Size 50X6mm With The Riser Of The Already Laid Earth Mat, Welding 150Mm In Length, 6Mm Thick On Both Sides & End Of The Strip And Connecting Other End With Nuts & Bolts If Required As Per The Directions Of The Department Officers. Charges Includes Hire Charges Of Dc Arc Welding Set, Current Charges, Cost Of Low Hydrogen Content Dc Arc Welding Electrodes ( No.E7018 ) Cost Of Anti Corrosive Paint Etc. Complete. 17 Welding One End Of The Gi Strip 50X6mm With The Structure With A Welding Length Of 50Mm & 6Mm Thickness On Both Sides & End Of The Strip And Connecting Other End With Bolts & Nuts If Required Including Hire Charges Of Dc Arc Welding Set, Current Charges, Cost Of Low Hydrogen Dc Arc Welding Electrodes ( No.E7018 ) Cost Of Anti Corrosive Paint Etc. Complete. 18 Fixing Departmentally Supplied Marshalling Kiosk In The Existing Pt / Ct Structure By Making Suitable Fixing Arrangements Including Cutting, Welding, Drilling Holes Etc As Required. 19 Doing Out Door / Indoor Cable Termination Of 1X500 Mm2 11Kv Xlpe Cable Very Carefully Observing Directions Of Manufactures And Departmental Staff Including Crimping Of Socket 20 Laying 1 X 500 Sq Mm Xlpe Cables In Trench Including Drawing Through Pipes Wherever Necessary 21 Mounting One 1X500 Mm2 Xlpe Out Door / Indoor Cable Termination Of Structures Very Carefully Without Causing Any Damaged To The Drilling Holes Wherever Necessary As Directed By The Departmental Officers 22 Fabrication Of Structures For Erecting Equipments. The Gi & Ms Angles Will Be Supplied Departmentally 23 Transportingby Head Load, The Materials Issued Departmentally To The Site From The Place Of Storage And Distribution To Erection Site. ( Up To 50M ) 24 Drilling Holes In Yard Structure 25 Cutting Of Steel Angle In Yard Structure Erection 26 Welding Charge For Welding On Iron Parts Using Arc Welding As Per Standards 27 Painting On G.S. Sheet With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade-New Work ( Two Or More Coats ) Including A Coat Of Approved Steel Primer But Excluding A Coat Of Mordant Solution

BRR : 10332441 tender for CONSTRUCTION OF 2 NOS AIS BAYS WITH EXTENSION OF 132KV MAIN &TRANSFER BUSFOR 132KV MALLAWAN- BANGARMAU DOUBLE CIRCUIT LINE AT 132KV S/S BANGARMAU,UNNAO UNDER ETD UNNAO. Sl. No. Item Description 1 Erection of various structures & equipments 2 Erection of main and auxiliary structure consisting of columns, beams, peaks, masts etc. and auxiliary structures required for installation of Bays ATM, AXM, YMM, XPM, BBL, BTI, BCT, ALP etc. including shifting of all material i.e. structure parts nuts, bolts washer etc. from store to site of erection, erection of structure as per drawings and practices using flat and spring washer with each bolt. Matching of holes, cutting, matching of member if required shall also be done by the contractor without any extra cost to complete the work satisfactorily. All material to be erected shall be supplied by the UPPTCL free of cost but all men, material and T&P required for satisfactorily completion of work shall be arranged by the contractor at his own cost. 3 Erection of Equipments :- Erection of following equipments as per instruction manual of various equipment and technical specification including shifting of material/equipment from store to erection site including all other associated work to complete the job satisfactorily :- 4 145 KV C.B. 5 145 KV C.T. with JB 6 145 KV P.T. with JB 7 120 KV LAs. 8 145 KV Bus Isolator. 9 145 KV Line Isolator. 10 145 KV Tendom Isolator. 11 145 KV Post Isolator. 12 132 KV Control &Relay Panel 13 Control cable laying & interconnection 14 Laying of following sizes of control cable in the cable trench from control relay panel to various equipment/marshalling boxes/JB etc. in switchyard as per cable schedule, its saddling at every 75mm. distance with MS saddles of size 25x3mm. including carriage of cable drum from store to laying site & shifting back to store and all other associated works to complete the job satisfactorily as per technical specification. 15 10 x 2.5 mm. 16 6 x 2.5 mm. 17 4 x 2.5 mm. 18 2 x 2.5 mm. 19 Interconnection & termination of the above laid control cables between Control and Relay Panels & erected equipments i.e. СВ , СТ , СТ Junction Box, PT, PT Junction, box,ISO Box. Including making necessary holes in Gland Plates or Boxes whereever required along with supply of Cable glands of appropriate size and providing of Ferrules for each core of the cables & its termination with crimping type Copper Lugs alongwith preparation of interconnection Drawing and Commissioning of the Panel/ Feeders in co-ordination with T&C Wing including providing 02 sets of Hard Copies of as executed Interconnection Drawing including associated works required for the satisfactorily completion of the Job as per technical specification. 20 Bus bar and jumpering 21 Stringing of 132 KV New Mallawan bay-I andMallawan Bay-II from dead end tower to main bus of ACSR panther conductor including fitting oftension clamp, hoisting ofDisc Insulator, cutting of conductor and also shifting of all materials from store site. 22 Stringing of 132 KV Main bus bar 3 phasewith ACSR Moose conductor including fitting oftension clamp, hoisting ofDisc Insulator, cutting of conductor and also shifting of all materials from store site.(1 section =24Mtr) 23 Stringing of 132 KV Transfer bus bar 3 phasewith ACSR moose conductor including fitting oftension clamp, hoisting ofDisc Insulator, cutting of conductor and also shifting of all materials from store site.(1 section =24Mtr) 24 Stringing of 132 KVJack Bus (3 phase ) for New Mallawan bay-I &IIof ACSR Moose conductor including fitting oftension clamp, hoisting ofDisc Insulator, cutting of conductor and also shifting of all materials from store site. 25 Stringing of 132 KVJack Bus (3 phase ) for New Mallawan bay-I &IIof ACSR panther conductor including fitting oftension clamp, hoisting ofDisc Insulator, cutting of conductor and also shifting of all materials from store site. 26 Jumpering of newly erected equipmentswith ACSR Moose/panther conductors work includes jumper cutting,making& tightening of jumpers with specified tools. 27 Earthing details 28 Laying of Earth Mat in Extended 132 KV Switchyard of 132KV S/S Bangarmau,Unnaoalong with connecting the newly Laid Earth Mat with Existing Earth Mat columns including cost of all labour, T&P, Misc. Consumable material etc. for proper completion of work. 29 Laying of 40 mm din MS round bar, 700 mm below the ground level along with shifting of MS round bar from store to work site including cutting straightening welding painting excavation of trench etc. along with back filling of excavated trench after laying earth mat 30 Fabrication of 3 Meter long Electrode with 40 mm dia MS Round Bar having 150 mm long contont shape and then its pleroing vertieally, mside the Ground with top 700 mm below ground level including shifting of MS Round Bar from store to Switchyard. 31 Making of 150 mm long Lap Joint of above laid 40 mm dia Round barby due cutting, Straighteningwelding on both sides. 32 Making of 150 mm long Lap Joint of above laid 40 mm dia Roundbar to connect with existing Earth Mat of the sub station by due welding on bothe sides. 33 Making of cross Joint of abvoe laid 36 mm dia MS Round Bar, 700 MM below Ground Level by due welding at all 4 corners including providing & welding of suitable size MS Angle Piepe on opposited corners. 34 Making of End Joint of above laid 36 mm dia MS Round with Top of Vertically Pierced MS Electrodes, 700 mm below Ground Level by due welding. 35 2 point earthing of structure and equipments with 75x10 and 50x6 mm MS flats by digging 0.7 meter deep trench in earth from equipments to substation earthmat which includes providing,cutting,welding and bending of MS flats as well as shifting of materials from store to site.All materials including MS flat to be provided by contractor. 36 MS Flat 50x6 mm 37 MS Flat 75x10mm 38 MS Flat 25x6mm 39 Painting of earthing strip of various size with 1 coat of red oxide and 2 coat of Bus green ISI paint including vertical suppport. Paint to be provided by contractor. 40 MS Flat 50x6 mm 41 MS Flat 75x10mm 42 MS Flat 25x6mm 43 Making mesh earthing(AS per drawing) for 120KV LA and conecting with existingearthmatefor 132KV Mallawan I&II 44 Miscellaneous work 45 Installation ,Laying,test & commissioning off links etc. of 48 fibre (DWSM) OPGW fibre optic cable alongwith all neccesary hardware 46 Supply & fixing of 150 watt LED Street light lattice Structure or 132KV GI Pipe bracket complete LED light with high power LED and unique lux value up to ensure uniform light distribution, luminaries single piece aluminum body suitable for 150 watt LED on GI pipe bracket complete in all respect including cost of lamp internal control gear Cat-A Philips / Bajaj / Crompton make with 02 year warrenty . This work including cable connection and all other associated work to complete the job as per technical specification including cost of man, material andT&P etc. 47 Installation, testing, and commissioning of a 63 kVA DG Set at 132kV S/S Bangarmau,Unnao for uninterrupted system operation. The contractor shall provide all required manpower, materials (DG set, AMF panel, cables, earthing system, foundation items), and T&P (crane, tools, test kits, safety gear). Work includes placement, interconnection, earthing, and commissioning of the DG Set with full-load testing. DG Set must conform to CPCB-II norms. A 24-month warranty with free service shall be ensured. 48 Installation, testing, and commissioning ofoutdoor 415V AC Lighting Distribution Board (LDB) at Bangarmau for proper functioning , as per instructions of the Engineer-in-Charge. All required manpower, tools, testing equipment, and earthing of the LDB shall be in the contractors scope. 49 Installation, testing, and commissioning of Bay Marshelling Kiosk at Bangarmau for proper functioning , as per instructions of the Engineer-in-Charge. All required manpower, tools, testing equipment, and earthing of the Marshelling Kioskshall be in the contractors scope. 50 Obtaining No objection certificate from office of Electrical safety Directorate, Lucknow for first time energization of 02 Nos. 132 KV Bays with extension of 132 KV Main Bus and Transfer Bus. (including payment of fee as per challan) 51 Dismantling of 132 KV CT from existing main bus and shifting of dismantled CT to store. 52 Dismantling of main and auxillary structure including their shifting from dismantling site to safe storage place at the substation

BRR : 10332509 Tender For The Work Of Construction Of 132 Kv Fci (Ii)-Bhathat Single Circuit Line With Construction Of 01 No. 132 Kv Bay At 132 Kv Substation Bhathat And 01 No. 132 Kv Bay At 132 Kv Substation Fci-Ii, Under Electricity Transmission Division-I, Mohaddipur-Gorakhpur - SUPPLY PORTION 2 N-B Washer for Tower 3 CONDUCTOR ACCESSORIES 4 Supply of Mid span compression joint 5 Supply of Vibration Damper suitable for Zebra conductor 6 Supply of Repair sleeves suitable for Zebra conductor 7 PA rod for zebra conductor 8 TOWER ACCESSORIES 9 Pipe type earthing inclusive material for above towers 10 Phase plate in set of red,yellow,blue colour 11 Danger plate 12 Ckt plate for single ckt 13 Number plate 14 Danger Instruction tape 15 HARDWARE FITTING& INSULATOR SUITABLE FOR ACSR ZEBRA conductor 16 Single Tension Fitting suitable for zebra conductor 17 Double Tension Fitting suitable for zebra conductor 18 Disc Insulator 120 KN(Porcelain type) 19 Single pilot suspension fitting suitable for zebra conductor 20 70KN porcelin insulator suitable for 132kv single pilot suspension fitting. 21 OPGW 22 48 Fibre (DWSM) OPGW FIBRE OPTIC CABLE 23 Supply &installation of hardware set for 48 Fibre OPGW 24 Joint box(48 FIBRE) with complete set for OPGW 25 FODP 48F 26 Fibre Optic approach cable for 48F OPGW 27 Supply of hardware set for 48F(DWSM,G.652D)Fibre Optic approach cable 28 WORK PORTION 29 Survey including preparation of profile & schedule of materials, marking of locations (Route Length) 30 Check survey & final peg marking (Route Length) 31 Soil investigation for all kind of soil 32 Cost of excavation of 132 KV NBMC(MD+3,03 Nos) ,DD+0(1)tower foundation pits including all earth work, back filling, dewatering by boring and leveling. The excavation has to be done manually. 33 Setting of stubs including all foundation work but excluding cost of concerning and excavation (rate per location) for following 132 KV towers. 34 132 KV DD Zebra 35 132 kv NBMD Zebra 36 Cost of concerning M:20 for all types of foundation including cost of cement ,coarse sand, stone balast, dewatering, shoring and shuttering, forming, curing but excluding cost of reinforcement bars. 37 RCC(1:1.5:3) 38 PCC(1:3:6) 39 Installation of steel reinforcemant bars in RCC foundation including cost of cutting, bending, binding and placing them in foundatiuon pits etc. 40 Erection of special structure of 132 KV tower and their extensions including all works above ground level and fitting of danger, number & phase plate,ckt plate etc and fixing& punching for 132kv sc line. 41 Stringing conductor of New erected 132KV SC LINE (from gantry of 132kv s/s FCI-II End to 132kv s/s Bhathat Gantry end) after laying,tensioning clamping,jointing etc of ACSR Zebra conductor including hoisting of insultors and fitting of all necessaryhardware fittings&accessories on all 3 phases of 132 kv SC lines with all cost of men, T&P, Tractor, steel ceiling ,cone press machine etc required for proper completion of work. 42 Stringing of NEW OPGW wireincludingfixing of all kinds of hardwares/fittingsof allnecessarytension fitting clamps of hardwares&accessories of OPGW,checking of end to end connectivity&testingetc of 132kv sc line including dismantling of existing OPGW 24 fibre from FCI-2 gantry to Existing NBMC tower no-6 . 43 Splicing&Installation of joint Box (24 Fibre) of OPGW 44 Pipe type earthing of newly erected towers with all associated material salt&coal and t&p etc for proper completion of work. 45 Tack welding of all the bolts upto the height of one section or 5 mtr from ground level whichever is higher with three tacks of 10 mm/12mm electrode & applicable of Zinc rich paint on the affacted surface including all cost of materials. 46 Refurbishing of roads,drains,any other concrete structure /Building after completion of foundation work (for road as per site requirement i.e 300x3.5mtr) 47 Bay at 132 KV S/S Bhathat 48 Item/ Equipments along with all accessories as per specifications 49 40mm diaMS electrodes (3 M long) 50 MS Flat for earthing 51 75*10 mm 52 50*6 mm 53 25*6 mm 54 70 KN antifog disc insulators 55 Single Tension Fittings Suitable for 56 ACSR Zebra 57 Single Suspension Fittings Suitable for 58 ACSR Zebra 59 PG clamps suitable for - 60 Moose /Zebra 61 Zebra/Zebra 62 Zebra/Panther 63 Panther-Panther 64 Bus Post Clamps suitable for- 65 Twin Zebra 66 Terminal connector for 132kv CT 67 Terminal connector 145KV Potential Transformers 68 Work Portion 69 Erection of (Main&Auxiliary structure) structure parts the job consist of sorting, counting, shifting of all materials structure parts, nuts and bolt etc from store to erection site, proper erection of structure as per drawing and all other associated works. 70 Erection of following equipments as per instruction in manual of all various equipments and as per technical specification including shifting of equipments from store to site including all other associated work to complete the job satisfactorily 71 132 KV Equipments For 132KV Line Bay 72 132KV C.B (200057) 73 132 KV Tendum Isolator with marshling box(200137) 74 132 KV Bus Side Isolator with marshling box(200059) 75 132 KV Line Side Isolator with marshling box(200060) 76 132 KV CT (200058) 77 132 KV CT JB (700462) 78 132 KV LA (200062) 79 132 KV Post Insulator (200061) 80 132 KV LINE C&R Panel SAS Type (401551) 81 132 KV PT (200131) 82 132 KV PT JB (200118) 83 Laying of following size of cable in three rack cable trench from control panel, relay panel to various type equipments, junction box as per cable schedule and drawing its shadding/binding at every 1 meter distance with aluminium strip size 25x6mm including carrige of cable drum from store to laying site and shifting back to store and all associated work. 84 2 C x 2.5 sq. mm (400130) 85 4 C x 2.5 sq. mm (400131) 86 6 C x 2.5 sq. mm (400132) 87 10 C x 2.5 sq. mm (400133) 88 Termination of following size of cable as led above as per cable schedule including making necessary holes in glands plate or box where ever required. Supply and fixing of cable glands of appropriate size. Supply and fixing of ferrules and cable-mark for each core as required and termination with proper size of lug and all other associated work to complete the job safisfactorily as interconnection as per technical specification.400771 89 2 C x 2.5 sq. mm (400145) 90 4 C x 2.5 sq. mm (400146) 91 6 C x 2.5 sq. mm (400147) 92 10 C x 2.5 sq. mm (400148) 93 Interconnection of jumper from equipments to equipments,to LA,to PT,to CT,TI,LSI,CB,TI,BSI to the existing bus bar etc, the work including cutting, bending of conductor and clamping and all other associated work to complete the work. ACSR Panther/Moose conductor will be provided by the department. 94 132KV BHATAHT LINE BAY (401956) 95 Fabrication of 3 meter long electrode with following MS rod having 150 mm conical shape and then its piercing vertically its side the ground with top 700 mm below ground level and its welding with earth mat execluding the cost of MS bar (401785) 96 Earthing of main and auxiliary structure,after Cutting, stringing, bending, laying of following size MS flat for equipment structure,cable racks, Equipment body including DM/M.Box, CT, PT, CB, LSI/BSI with M.Box, equipment etc including welding with main earthmat 700 mm below ground level with object to each excavation of trenches its back filling. painting with synthetic enemal green color above ground and all associated work to complete the job satisfactorily excluding cost of MS flat. 97 75x10 mm (400713) 98 50x6 mm(400714) 99 25x6 mm (400715) 100 Delta earthing for following equipments consisting 3 meter long electrode its pilling inside ground and connection of all 3 Nos electrodes with 75x10 mm MS flat and ms round bar provided by departmental at free of cost. 101 132KV LA (401785) 102 SAS Configuration&Integration of all Panel with existing ABB make SCADA system. It involves Integration of SAS Panel in existing ABB make SCADA System including all associated work and required supply(as per Patchcord LC-LC-10MTR,5 Nos, LC-ST 8mtr 5Nos,ST-ST ,10mtr 5nos etc) to complete the job satisfactory alongwith arrangement of Service Engineer (M/S ABB) by Contractor at his own cost.(702077) 103 Miscellenious Work 104 Switchyard Lighting (800107) 105 Providing and Fixing of Sodium Vapur Lamp / HPSV of 250 watt , 230 Volt (Philips / Havells / Bajaj) as per specification having 1-ph,90-300v AC ,50Hz,Make C&S/Bajaj/ Philips including minimum 1 years replacement. 106 Laying of Control cable to be provided by the department free of cost around switchyard Junction box. 107 Providing Junction box as per size 250x250x120 mm made of MS Sheet , 16 SWG inside mounting the channel with 02 Nos. HRC fuse and 02 Nos. TB4 way type and 01 No. MCB , 02 Nos. Cable gland sixe 2 centimeter cable gland front side locking / sealing arrangement and painted with one coat of red oxide primer and two coat of synthetic enamel smoke gray color paint. 108 Providing and Fixing of Clamps for fixing of GI bend pipe and top column. 109 Termination of cable junction box and lighting fitting both terminal ,testing,commissioning after its connection to complete the job including with all the cost of Labour T&p and materials as per site requirement. 110 Fixing of Junction box size 25x250x120 mm of each gantry excluding cost of Junction box. 111 Sorting,,Loading,Carriage,Unloading ofsubstation structure/materials from Electy. fabrication unit Naini Prayagraj to 132KV S/S Bhathat Gorakhpur. 112 Sorting, counting, stacking mark wise and head loading of structure on truck/tralier (18.08MT) 113 Safe carriage of loaded structure from electy. fabrication unit Naini Prayagraj To 132 KV S/S Bhathat Distance approx. 320 km ( 18.08 MT X 320 km=5785.6 MT/KM) 114 Unloading of carriage structure from Truck/Trailer its Sorting, Counting and proper Stacking at the S/S premises as per direction of supervisioning engineer ( 18.08 MT ) 115 Safely Carriage of miscellenious materials from differentsubstations (distance upto 320km ,@40KM/JOB)by private vehicle with loading &unloading charges to 132KV S/S Bhathat Gorakhpur ,if required.(400854) 116 Bay at 132 KV S/S FCI-II 117 Item/ Equipments along with all accessories as per specifications 118 40mm diaMS electrodes (3 M long) 119 40mm diaMS Roundbar (6 M long) 120 MS Flat for earthing 121 75*10 mm 122 50*6 mm 123 25*6 mm 124 70 KN antifog disc insulators 125 Single Suspension Fittings Suitable for 126 ACSR Zebra 127 PG clamps suitable for - 128 Moose /Zebra 129 Zebra/Zebra 130 Bus Post Clamps suitable for- 131 Twin Zebra 132 Terminal connector for 132kv CT 133 Terminal connector 145KV Potential Transformers 134 Work Portion 135 Erection of (Main&Auxiliary structure) structure parts the job consist of shorting, counting, shifting of all materials structure parts, nuts and bolt etc from store to erection site, proper erection of structure as per drawing and all other associated works. 136 Erection of following equipments as per instruction in manual of all various equipments and as per technical specification including shifting of equipments from store to site including all other associated work to complete the job satisfactorily 137 132 KV Equipments For 132KV Line Bay 138 132KV C.B (200057) 139 132 KV Tendum Isolator with marshling box(200137) 140 132 KV Bus Side Isolator with marshling box(200059) 141 132 KV Line Side Isolator with marshling box() 142 132 KV CT (200058) 143 132 KV CT JB (700462) 144 132 KV LA (200062) 145 132 KV Post Insulator (200061) 146 132 KV LINE C&R Panel SAS Type () 147 132 KV PT () 148 132 KV PT JB () 149 Laying of following size of cable in three rack cable trench from control panel, relay panel to various type equipments, junction box as per cable schedule and drawing its shadding/binding at every 1 meter distance with aluminium strip size 25x6mm including carrige of cable drum from store to laying site and shifting back to store and all associated work. 150 2 C x 2.5 sq. mm (400130) 151 4 C x 2.5 sq. mm (400131) 152 6 C x 2.5 sq. mm (400132) 153 Termination of following size of cable as led above as per cable schedule including making necessary holes in glands plate or box where ever required. Supply and fixing of cable glands of appropriate size. Supply and fixing of ferrules and cable-mark for each core as required and termination with proper size of lug and all other associated work to complete the job safisfactorily as interconnection as per technical specification.400771 154 2 C x 2.5 sq. mm (400145) 155 4 C x 2.5 sq. mm (400146) 156 6 C x 2.5 sq. mm (400147) 157 Interconnection of jumper from equipments to equipments,to LA,to PT,to CT,TI,LSI,CB,TI,BSI to the existing bus bar etc, the work including cutting, bending of conductor and clamping and all other associated work to complete the work. ACSR Panther/Moose conductor will be provided by the department. 158 132KV BHATAHT LINE BAY 159 Fabrication of 3 &6 meter long electrode with following MS rod having 150 mm conical shape and then its piercing vertically its side the ground with top 700 mm below ground level and its welding with earth mat execluding the cost of MS bar (401785) 160 Earthing of main and auxiliary structure,after Cutting, stringing, bending, laying of following size MS flat for equipment structure,cable racks, equipment body including DM/M.Box, CT, PT, CB, LSI/BSI with M.Box, equipment etc including welding with main earthmat 700 mm below ground level with object to each excavation of trenches its back filling. painting with synthetic enemal green color above ground and all associated work to complete the job satisfactorily excluding cost of MS flat. 161 75x10 mm (400713) 162 50x6 mm(400714) 163 25x6 mm (400715) 164 Delta earthing for following equipments consisting 3 meter long electrode its pilling inside ground and connection of all 3 Nos electrodes with 75x10 mm MS flat and ms round bar provided by departmental at free of cost. 165 132KV LA (401785) 166 SAS Configuration&Integration of all Panel with existing Schnieder make SCADA system. It involves Integration of SAS Panel in existing Schnieder make SCADA System including all associated work and required supply(as per site requirement-Patchcord LC-LC-10MTR,5 Nos, LC-ST 8mtr 5Nos,ST-ST ,10mtr 5nos etc) to complete the job satisfactory alongwith arrangement of Service Engineer (M/S Schnieder) by Contractor at his own cost.(702077) 167 Miscellenious Work 168 Switchyard Lighting (800107) 169 Providing and Fixing of Sodium Vapur Lamp / HPSV of 250 watt , 230 Volt (Philips / Havells / Bajaj) as per specification having 1-ph,90-300v AC ,50Hz,Make C&S/Bajaj/ Philips including minimum 1 years replacement. 170 Laying of Control cable to be provided by the department free of cost around switchyard Junction box. 171 Providing Junction box as per size 250x250x120 mm made of MS Sheet , 16 SWG inside mounting the channel with 02 Nos. HRC fuse and 02 Nos. TB4 way type and 01 No. MCB , 02 Nos. Cable gland sixe 2 centimeter cable gland front side locking / sealing arrangement and painted with one coat of red oxide primer and two coat of synthetic enamel smoke gray color paint. 172 Providing and Fixing of Clamps for fixing of GI bend pipe and top column. 173 Termination of cable junction box and lighting fitting both terminal ,testing,commissioning after its connection to complete the job including with all the cost of Labour T&p and materials as per site requirement. 174 Fixing of Junction box size 25x250x120 mm of each gantry excluding cost of Junction box. 175 Sorting,,Loading,Carriage,Unloading ofsubstation structure/materials from Electy. fabrication unit Naini Prayagraj to 132KV S/S Bhathat Gorakhpur. 176 Sorting, counting, stacking mark wise and head loading of structure on truck/tralier (5.33MT) 177 Safe carriage of loaded structure from electy. fabrication unit Naini Prayagraj To 132 KV S/S Bhathat Distance approx. 320 km ( 5.33MT X 320 km=1705.6 MT/KM) 178 Unloading of carriage structure from Truck/Trailer its Sorting, Counting and proper Stacking at the S/S premises as per direction of supervisioning engineer ( 5.33MT ) 179 Safely Carriage of miscellenious materials from differentsubstation (distance upto 320km ,@40KM/JOB)by private vehicle with loading &unloading charges to 132KV S/S FCI-II Gorakhpur ,if required.(400854)

BRR : 7296200 Tender For Construction Of 110 Kv Substation Kothakurussi - Erection Of Yard Structures And Equipments At 110 Kv Substation Kothakurussi-Capital work of 110kV Substation,Kothakurussi -Erection of Yard structures and Equipments at 110kV Substation Kothakurussi.-after dragging up to 50M using suitable lifting device carefully without causing any damage to equipments and fastening in the lorry make it ready for transportation as per the direction of the department officers. 2 Unloading one 110/66KV LA from department lorry to substation site using suitable lifting device and dragging to safe place without causing any damage to CT as per the direction of the department officers. 3 Loading one 110/66KV CT / CVT / PT / CC from the place of its storage to department lorry using required lifting device without causing any damage to equipment and its parts. 4 110KV CT, PT 5 110KV NCT 6 11KV NCT 7 Unloading one 110/66KV CT/PT/CVT/CC from department lorry to substation site using suitable lifting device and dragging to safe place without causing any damage to CT as per the direction of the department officers. 8 110KV CT, PT 9 110KV NCT 10 11KV NCT 11 Loading one set 110/66KV Circuit breaker with its interrupting poles, mechanism box, structures and all its accessories safely without causing any damage using necessary lifting devices to department lorry and fastening for transportation 12 Unloading one set 110/66KV Circuit breaker with its interrupting poles, mechanism box, structures and all its accessories safely without causing any damage using necessary lifting devices from department lorry to substation site and stacking properly for safe storage. 13 Loading one 110/66KV LA from the place of its storage to department lorry, if required, after dragging up to 50M using suitable lifting device carefully without causing any damage to equipments and fastening in the lorry make it ready for transportation as per the direction of the department officers. 14 11KV LA 15 Unloading one 110/66KV LA from department lorry to substation site using suitable lifting device and dragging to safe place without causing any damage to CT as per the direction of the department officers. 16 11KV LA 17 Loading one set 110/66KV Line Isolator with its insulator stacks, supporting channels, connecting pipes, isolating rods, earth switches, mechanism box, structures and all its accessories safely without causing any damage using necessary lifting devices to department lorry and fastening for transportation 18 Unloading one set 110/66KV Line isolator with its insulator stacks, supporting channels, connecting pipes, isolating rods, earthing rods, mechanism box, structures and all its accessories safely without causing any damage using necessary lifting devices from department lorry to substation compound and stacking properly for safe storage. 19 Loading 1x500 sq. mm XLPE cable from its place of storage to department lorry and properly without causing any damage to its insulation and make ready for transporting as per the direction of department officers. 20 Unloading 1x500 sq. mm XLPE cable from department lorry to substation site and stacking properly without causing any damage to its insulationas per the direction of department officers. 21 Loading MS / GI materials hard ware fittings of line work and clamps for equipments and bus from the place of its storage to department lorry and make it ready for transportation as per the direction of departmental officers. 22 Unloading MS / GI materials, hard ware fittings of line work and clamps for equipments and bus from department lorry to substation site and stacking for proper storage as per the direction of departmental officers. 23 Transportingby head load, the materials issued departmentally to the site from the place of storage and distribution to erection site 24 Drilling holes in yard structure 25 Cutting of steel angle in yard structure erection 26 Welding charge for welding on iron parts using arc welding as per standards 27 Fabrication of structures for erecting equipments. The GI & MS angles will be supplied departmentally 28 Erection of yard structures and assembling of columns and beams using bolt and nut including punching of holes. 29 Erection of 1 No. 110/66KV CT/PT/CVT/CC/220KV NCT on the already erected structure of above 1.5m height after opening of crates at the place of storage, leading to site carefully keeping at vertically not allowing tilting from vertical position more than the specified angles, keeping lines and levels as per the direction of the departmental officers, including all labour charges, hire charges of tools& tackles etc. 30 Conveying to the erection site and erecting carefully 1 No. 33KV CT/PT/110KV NCT & RVT/NCT(52/36kV) on the already erected structure after opening of crates at the place of storage leading to site carefully keeping at vertically not allowing tilting from vertical position more than the specified angles, keeping lines and levels as per the direction of the departmental officers, including all labour charges, hire charges of tools& tackles etc. 31 Erection of 1 No. 11KV CT/PT/11KV NCT on the already erected structure after opening of crates at the place of storage leading to site carefully keeping at vertically not allowing tilting from vertical position more than the specified angles, keeping lines and levels as per the direction of the departmental officers. 32 Erection of 1 No. 11KV LA (station type ) /11KV Post insulator on the already erected structure after opening of crates at the place of storage leading to site carefully, keeping lines and levels as per the direction of the departmental officers. 33 Erection of 1 No. 110/66KV LA/Post insulator on the already erected structure after opening of crates at the place of storage leading to site carefully, keeping lines and levels as per the direction of the departmental officers. 34 Erection of one set 110/66KV Bus Isolator on the already erected structure including opening crates and conveyance of all accessories from the place of storage to the place of erection to lines and levels, erection of mechanism box , checking operation and aligning properly, including cutting, welding etc.complete as per the direction of departmental officers. 35 Erection of one set 110/66KV line Isolator on the already erected structure including opening crates and conveyance of all accessories from the place of storage to the place of erection to lines and levels including erection of mechanism box checking operation and aligning properly as per the direction of departmental officers. 36 Unpacking carefully and leading one set of 3 pole EHT110/66KV Circuit Breaker from the place of storage, including support structure , mechanism box compressor, pipe lines etc. to site , cleaning and erecting on foundation using suitable lifting tools, after disassembling necessary parts if required, to lines and levels and assembling all the parts , connecting mechanism etc. in complete shape and making ready for commissioning as per the direction of departmental officers. 37 Uncoiling, paving out, stringing and fixing of bus bar using ACSR Kundah / Moose single conductor for one phase of 66/110KV bus of span up to 30M by cutting the conductor to sufficient length, crimping using compressor / bolting the two ends, washing, cleaning and drying the insulator discs, fixing the conductors to the yard structure with sufficient tension using string of insulators and hardware complete. at both ends, fixing of arcing hornes including transportation of materials from the stockyard to the site under the supervision and direction of department staff at site.(All materials will be supplied departmentally at free of cost). 38 Stringing and fixing earth wire of size 7/9, 7/10 or 7/3.15 between top of the columns and to terminal tower at 33/66/110/220KV substations with compressed / bolted ends at proper tension including uncoiling and cutting of conductor , jumpering, giving earth bond connections by drawing the end of the conductor through the columns, jointing where ever necessary providing back stays at the time of stringing etc. as per the direction of the departmental officers. 39 Providinginterconnection between equipments using ACSR Moose/ Kundah/ wolfSingle conductor at both ends with compressed/ bolted ends including uncoiling and cutting of conductor as per the direction of departmental officers. 40 Providing droppers and connecting to lines / equipments or jumper between two buses without suspension insulators using ACSR Moose/ Kundah/ wolfSingle conductor at both ends with compressed/ bolted ends including uncoiling and cutting of conductor as per the direction of departmental officers. (For one phase) 41 Laying of departmentally supplied GI strip/Copper strip of suitable sizeincluding cleaning and neatly bending of strips ,cutting, removing of metal/earth in the yard and burying earth strip to the required depth re-doing the yard metalling as per the direction of the departmental officers. 42 Welding one end of the bended GI strip of size 50x6mm with the riser of the already laid earth mat, welding 150mm in length, 6mm thick on both sides & end of the strip & other end of the strip with yard structure at 2 points 50mm apart each welding points having 50mm length and 6mm thick on both sides & end of the strip including the charges for connecting the strip with structure using bolted joints as per the directions of the department officers. Charges includes hire charges of DC arc welding set, current charges, cost of low hydrogen content DC arc welding electrodes(No.E7018) cost of anti corrosive paint etc. complete.(Structure earthing) 43 Welding overlapping joints of 50x6mm GI strip with 50mm long, 6mm thick welding on all three sides after doing 2 Nos. bolted joints at the centre as specified after cleaning the surface. Charges includes hire charges of DC arc welding set, current charges, cost of low hydrogen content DC arc welding electrodes( No.E7018) cost of anti corrosive paint etc. complete. 44 Welding one end of the bended GI strip of size 50x6mm with the riser of the already laid earth mat, welding 150mm in length, 6mm thick on both sides & end of the strip and connecting other end with nuts & bolts if required as per the directions of the department officers. Charges includes hire charges of DC arc welding set, current charges, cost of low hydrogen content DC arc welding electrodes(No.E7018) cost of anti corrosive paint etc. complete.(Equipment earthing) 45 Welding one end of the GI strip 50x6mm with the structure with a welding length of 50mm & 6mm thickness on both sides & end of the strip and connecting other end with bolts & nuts if required including hire charges of DC arc welding set, current charges, cost of low hydrogen DC arc welding electrodes (No.E7018) cost of anti corrosive paint etc. complete. 46 Fixing departmentally supplied marshalling kiosk in the existing PT/CT structure by making suitable fixing arrangements including cutting , welding, drilling holes etc as required. 47 Collecting from store or substation wherever available tools and materials such as jacks pulling and lifting machines,rails,sleepers, plies, ropes, empty drums, dummy plates, bolts and nuts gaskets, etc. including loading and unloading in department vehicle and accompanying and returningthe same after completing the work as per the direction of departmental officers.( Only if required) 48 Unloadingthe power transformers of weight 20T to 30T, carefully and safely inch by inch inserting railsand trawling to the platform made with sleepers and thus lowering very carefully inch by inch for placing on the rail track and hoisting to the plinth with out causing damage to transformer and accessories as per the direction of the departmental officer observing all safety precautions. 49 Pulling the power transformers of weight 20T to 30T, on the rail track, travelling for a distance up to 30M, using sleepers, rails, jacking, pulling and keeping ready for placing on the correct plinth as per the direction of departmental officers at site, safely without damaging any equipments and observing all safety precautions. 50 Loading to the department lorry the accessories of 10/12.5MVA transformer such as bushings with proper package, coolers, conservator tank, connecting pipes, bolt and nuts, wheels, rollers, fans, driving mechanism, cooler control box and oil drums etc. safely fastening them properly, accompanying the vehiclewith transformer from ……………….. to ……………and unloading and stacking in convenient place, taking all safety precautions as per the direction of departmental officers. 51 Assembling the 10 /12.5 MVA, 110/11 or 66/11KV transformer with all accessories in complete shape and filling oil if required including arresting the movement of the transformer by locking as per the direction of the departmental officers. 52 Covering the transformer with tarpaulin using ropes, bamboos etc. 53 Giving three phase connection to the filter unit from the supply mains using cable including fitting three numbers of fuse units near the filter unit and laying the cable from control room to filter unit and trial run of filter unit after giving connection etc. complete. ( Only iffound absolutely necessary and where departmental staff is not available ). 54 Hot oil circulation after draining oil from transformer, evacuating the transformer by using vacuum pump after providing LT connection to the pump , connecting the hose to transformer, operating carefully and continuously for attaining sufficient vacuum and keeping in vacuum for 24 hours and operating filter unit carefully and continuously for 24 hours except halt due to poor voltage and trouble in filter plant etc complete as per the direction of dept. officers. 55 Disconnecting the power connections to the filtering plant/ vacuum pump, coiling the cable, disconnect the hoses and coiling them and folding and removing tarpaulin used for covering the transformer, moving the filter plant and vacuum pump to a distant place as directed by the department staff. ( where departmental staff is not available and is found absolutely necessary) 56 Loading the 6000/5000litre/hr.or above transformer oil filter plant tolorry using tripod, chain block, pulley block, rope etc., after pulling it to the convenient position for lifting and fixing it firmly for safe transportation to the location as directed by department officers, unloading the same without causing any damage and placing it carefully at convenient place etc. complete as directed by department officers at site where ever required. 57 Turning and shifting 6000 L/H capacity transformer oil filtering plant or wheel mounted 10000/15000 Litre. oil tank with all accessories for a distance of 20Mto road, towingthe machine with department lorry by the use of D-Shackle and iron ropes , accompanying the lorry including supervision through out the journey especially in turnings to avoid falling of plant. Remove the machine from the lorry and drags up to 10M for safe storage where ever required. 58 Loading the empty oil tank of capacity 10000/15000 Ltr. From the place of its storage using wooden blocks, lever etc. and moving the tank to a distance of 10M from switch yard then loading the same to the dept. vehicle using chain pulley etc. carefully tying the tank in vehicle accompanying the vehicle up to Kothakurussisubstation, removing ties andunloading the tank carefully by the use of wooden blocks rails, chain pulley etc. again moving the tank to a distance of 50M, for safe storage. 59 Loading one vacuum plant of capacity 3HP with its pipelines to department lorry and unloading the same at the required substation as per the direction of departmental officers. 60 Laying 1 x 500 sq mm XLPE cables in trench including drawing through pipes wherever necessary 61 Doing out door/indoor cable termination of 1x500 mm2 11KV XLPE cable very carefully observing directions of manufactures and departmental staff including crimping of socket 62 For mounting 1 x 500 mm2 out door / indoor cable termination 63 Unpacking the transformer / feeder C&R panels, 110V battery charger, OLTC cubicle LT panel at the place of storage transporting to the place of erection and erecting after providing foundation bolt keeping to lines and levels as per the direction of departmental officers. 64 Unpacking at the place of storage and transporting 11KV indoor VCB/SF6 switch gear panel and its accessories to the place of erection and erecting after fixing foundation bolts by chipping concrete wherever necessary, tightening, keeping lines and levels taking all safety precautions including erection of potential transformers as per the direction of departmental officers. 65 Interconnection of panels and 11KV bus bars after opening covers, earthing, inter panel wiring, etc. and making ready for commissioning of breaker as per the direction of the departmental officers. 66 Assembling 55 cells of 100AH conventional battery, pore the acid in required level, connect the battery to the charger and charge to the required specific gravity level, check the specific gravity and voltage of each cells hourly. After attaining the required specific gravity and voltage keep the same for 24 hours, discharge the same up to 50% of the rating and then boost charge the same monitor the voltage and specific gravity regularly and make the battery ready for station use. 67 For 200AH Battery 68 Preparing wiring schedule per transformer / feeder bay of 110 or 66kV with details of type of cable, core and colour, ferrule No. and terminal no of equipments/panelsincluding giving full details in A4 sheet with computer print providing outer border line and sheet no etc. and supplying in the shape of book with special binding etc. and assisting the departmental officers at the time of relay testing and commissioning 69 Master Copy 70 Additional Copy 71 Uncoiling 20/19 core 2.5sqmm, 12 core 4 sqmm control cable (Armoured or un armoured) from cable drums cutting to required length and laying through trench/pipe/cable tray grouping the same neatly using cable tie and carefullyincluding for providing loop wherever necessary and providing cable marker at both ends of cable as per direction of departmental staff at site. 72 Uncoiling 12/7/6 core 2.5 sq mm control cable (armoured and un armoured) from cable drums and cutting to required length and laying through trench/pipe/cable tray grouping the same neatly using cable tie and carefullyincluding for providing loops wherever necessary and cable marker, at both ends of cable as per direction of departmental staff at site. 73 Uncoiling 4/2 core 2.5sqmm control cable (armored or unarmored) from cable drums and cutting to required length and laying through trench/pipe/cable tray neatly and carefully including for providing loops wherever necessaryand cable marker at both ends of cable as per direction of departmental staff at site. 74 Uncoiling 5/4/3/2 core 4sqmm control cable(armoured or un armoured) from cable drums and laying through trench/pipe/cable tray neatly and carefully including for providing loops wherever necessaryand cable marker at both ends of cable as per direction of departmental staff at site. 75 Fixing all type of terminal connecting strip with terminal connectors in the marshalling box or panel boardwherever necessary (terminal connecting strip will be supplied departmentally ) charges includes for providing necessary suitable hole etc complete as per direction of departmental staff at site. 76 Termination of cables in panel by using cable glands of fixing the cable rigidly by any means as per direction of departmental staff at site charges include for providing necessary suitable hole in the gland plate etc. 77 20/19 core 2.5sqmm cable/12 core 4 sqmm cable (using gland of size 28-32mm) 78 12/7/6 core 2.5 sqmm cable (using gland of size 25mm) 79 4/2 core 2.5 sq mm cable/4/2 core 4 sq mm cable (using gland of size 16-22mm) 80 Doing termination of all sizes of PVC insulated copper control cable 2.5mm², pealing, providing number and letter ferrules in the wire, stripping ends, crimping with suitable lugs and connecting to the terminals in the panel board and marshalling kiosk etc., neatly and carefully including cost of copper sockets and ferrules as per the direction of Departmental Officers at site. 81 Doing termination of all sizes of PVC insulated copper control cable 4.0 mm², pealing, providing number and letter ferrules in the wire, stripping ends, crimping with suitable lugs and connecting to the terminals in the panel board and marshalling kiosk etc., using cable tieand cable tie neatly and carefully including cost of copper sockets and ferrules as per the direction of Departmental Officers at site. 82 Supplying aluminium cable tags punching number and alphabets up to 7 digits and binding to cable using copper wire including cost of all materials as per the direction of Board Officials at site. 83 Making of cable clamps using 25x 3 mmGI strip (hot dipped)as per no of cablesin cable tray cutting and holing to required length and for fixing as per the direction of departmental officers at site including supply of suitable nut and bolts. 84 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m., asdirected by Engineer-in-Charge: All kinds of soil 85 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 86 Supplying and laying tarpaulin sheet of thickness 150GSM of approved make and quality over levelled surface including cost of tarpaulin sheet, wastage overlaps, conveyance and labour charges ect. Complete. 87 Supply and stacking Stone Aggregate (Single size) : 20 mm nominal size 88 Spreading 40mm stone aggregate/20mm stone aggregate in the yard about thickness of 15cm as per the direction of department officers at site 89 Conveying of precast RCC slabs (of various size) manually from stacking place within initial lead etc. complete and laying carefully in position without damaging the edges of slabs as well as cable trench side wall as per directions of Engineer-in- Charge. 90 Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle). 91 Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading. 92 Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads. 93 Drilling hole of various sizes on existing Channel/Cross Arm. 94 Additional rate for excavation of Pit for A type pole in Hard Laterite. 95 Providing one Earth using earth pipe including digging separate pit at standard distance away from the pole/structure & backfilling. 96 Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite 97 Fitting one Additional 3m Channel cross arm (35x35x5mm), in existing 11kV DP incl. conveyance of materials. 98 Erection of one set 11KV Isolator / AB switch (station class)on the already erected structure including opening crates and conveyance of all accessories from the place of storage to the place of erection to lines and levels including erection of mechanism box checking operation and aligning properly as per the direction of departmental officers. 99 Erecting one 250kVA Transformer to existing Plinth/Platform and giving connections,includingloading from TMR/SRS/other stacking place & unloading at site but excluding cost for transporting transformer 100 Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification). 101 Loading 3x300 sq. mm XLPE cable from its place of storage to department lorry and properly without causing any damage to its insulation and make ready for transporting as per the direction of department officers. 102 Unloading 3x300 sq. mm XLPE cable from department lorry to substation site and stacking properly without causing any damage to its insulationas per the direction of department officers. 103 Laying 3 x 300 sq mm XLPE cables in trench including drawing through pipes wherever necessary. 104 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11KV gradedirect in ground including excavation, sand cushioning,protective covering and refilling the trench etc as required. 105 Doing out door/indoor cable termination of 3x300 mm233KV XLPE cable very carefully observing directions of manufactures and departmental staff including crimping of socket 106 Mounting one 3x300 mm2 XLPE out door cable termination of structures very carefully without causing any damaged to the drilling holes wherever necessary as directed by the departmental officers 107 Random rubble masonry in CM 1:6 for foundation and basement including cost of all materials, conveyance, labour charges, etc. complete as perspecifications.

BRR : 9231079 Tender For 66 Kv Substation Sullar; 1 25/31.5 MVA, 66/11kV T/Fs 2 66 kV SF-6 Breaker along with 20% extra SF-6 Gas 3 66 kV Isolator with E/Switch 4 66 kV Isolator without E/Switch 5 66 kV Surge Arrestor 6 66 kV CTs for Line & Bus Coupler (600-300-150/1-1-1A) 7 66 kV CT for T/F (300-200-150/0.577-1-1A) 8 66 kV PT for line 9 66 kV NCT (300-200-150/1A) 10 11 kV NCT (1800-900/5A) 11 11 kV Surge Arrestor 12 11 kV 15 Panel Board (2000A)(including one no. bus sectionalizer panel) 13 66kV C&R Panels with SAS:a) Bus Coupler Protection and Circuit Breaker Panel (Without Auto Reclose) with SAS 14 b) Line Protection and Circuit Breaker Panel (Without Auto Reclose) with SAS with line current differential- cum- distance protection relay 15 c) Transformer Protection and Circuit Breaker Panel (Without Auto Reclose) with SAS 16 9000 KVAR 12.65 kV Automatically Switched Capacitor Bank along with allied equipment as per technical specification 17 220V 100AH Battery San Tubular 18 220 V 20/30 A Battery charger (SMPS) 19 220V D.C.D.B. 20 415 V LT AC Distribution Board 300 A 21 11/0.4 kV Station T/F 200 KVA 22 (a) 1.1 kV Copper Control Cable unarmoured for 66kV bays of size 7Cx4mm2, 4Cx4mm2, 2Cx4mm2,2Cx6mm2, 3Cx2.5mm2, 16Cx2.5mm2, 10Cx2.5mm2 & 7Cx2.5mm2 including junction box etc. refer Section-5 of copper & control cable & Section-7 for switchyard erection. 23 (b) Stainless steel MK (200 TB) 24 11 kV Power Cable XLPE 1C x1000mm2 for T/F to 11kV incomer (4 run per phase for each transformer allocating them 2 runs per phase for each 11kV I/C). 25 Termination kit at both ends for 11 kV XLPE Power Cable(1C x1000 mm2 ) Termination kits for (indoor/outdoor) both ends alongwith assessories constitute a set of each cable. 26 11 kV Power Cable XLPE3C x 400sq mm for Capacitor Bank 27 Termination kit at both ends for 11 kV XLPE Power Cable( 3C x 400 mm2) Termination kits for (indoor/outdoor) both ends alongwith assessories constitute a set of each cable. 28 11 kV Power Cable XLPE 3C x 50 sq mm for station T/F 29 Termination kit at both ends for 11 kV XLPE Power Cable( 3C x 50 mm2) Termination kits for (indoor/outdoor) both ends alongwith assessories constitute a set of each cable. 30 650/1100 Volts 3.5 core 240 mm2 aluminium power cable from Aux. T/F to ACDB. 31 650/1100 Volt 3.5 core 70 mm2 aluminium cable for oil filtration set. 32 650/1100 Volt 4core 16mm2 unarmoured with copper power cable for MLDB and other cable required as per contract for 66 kV bays. 33 Earthing Mat Material. The earth mat will be designed/ quoted for soil resistivity of 50Ωm. In case soil resistivity is more than 50Ωm then the earth mat will be designed for actual soil resistivity. The payment of extra material to be used for earth mat shall be made on pro rata basis. The approximate area of earth mat to be laid is given in the corresponding columns of the substations. However, item will remain a Lot item. (calculations may be made considering fault/shock duration of 1 sec., 5400 m2) 34 Fire Fighting equipments as per section-6:i) 22.5 Kg Capacity FE CO2 type, Trolley Mounted 35 ii) 25 Kg Capacity FE DCP type, Trolley Mounted 36 iii) DCP 10 Kg Capacity, Wall mounted 37 iv) FE CO2 6.5 Kg Capacity, Wall mounted 38 v) DCP 5 Kg Capacity, Wall mounted 39 vi) Foam Type 9 Litre Capacity, Wall mounted 40 vii) Water CO2 9 Litre, Wall mounted 41 viii) Fire Buckets (12 Nos. with stand in one set) 42 Complete lightning of control room building, switch yard area, road and street as per section-7 of the specification:a) Supply and installation of 2 fittings of 240W LED lamps with all accessories for Complete lighting of outdoor Switch yard area as per clause 16.0 of section 7 of the specifications. 43 b) Supply and installation of 35W LED tube on tubular steel poles along with the boundary wall at a distance of 30 meter as per as per clause 16.0 of section 7 of the specification 44 c) Complete lighting of road and street by providing 90W LED lamps on tubular steel poles at a distance of 15meter along the roads and streets as per as per clause 16.0 of section 7 of the specification. 45 d) Supply and installation of post top lantern 40W LED Lamps with all complete accessories at the entrance gate of sub-station. 46 e) Supply and installation of 40W LED Lamps with all complete accessories on corners of control room building. 47 Complete Substation automation system of 66/11kV substation including hardware (along with transducers) and software along with associated equipment for the bays (bay as defined in the technical specification, sec-sub-station automation system) as per technical specification. Name of 66 kV BayPresent Future66 kV T/F Bay2 66 kV Line Bay 46*66 kV Bus Coupler Bay 1 * Provision shall be made in SAS to accomodate future scope (i.e. 6 No. 66 kV bays as per space available in GELO) alongwith present scope.Note: Signals from protection relays in 11 kV incomer would also be wired to substation automation system (SAS) 48 Time synchronization equipment 49 High wall type split AC unit2 Ton capacity for C&R Panel room and SCADA room: (as per technical specification). 50 Computer system (SFF) with: Intel core i5 processor with 11th generation or higher as specified in sectiion-04 51 Multi-Function Monochromatic Laser Jet Machine (A4-25 PPM or more) with print copy and scan function, Duplexing feature, composite cartridge, ADF, A4 or larger flatbed size, Networking and wi-fi both, at least 1 input tray, 3 years on site OEM warranty. 52 BOM FOR SAMAST COMPLIANT IEM (ON SEPARATE CUBICLE) FOR 11KV I/C: 1. (a) 3P4W Interface Energy Meters (ABT type) 0.2s Class 1A with TTB & BCS 53 1 (b) Testing of IEM System from NABL accredited lab 54 2. Wired Indoor Meters Panel suitable for 8 meters 55 3. 16 P Industrial Grade un-managed Network switch 56 4. (a) Data concentrator unit (DCU)/ communication Gateway (IG) with dual SIM Modem along with enclosure and accessories 57 4. (b) 3C x 2.5 Sq. mm Un-armoured cable for DCU and Switches 58 5. Cat-6 cable-unshielded 59 6. PVC conduit Pipe - 3/4 with accessories for Cat-6 cable 60 7. Armored Fibre Optic Cable (2 pair) 61 8. HDPE conduit - 40/33 with accessories 62 9. 4Cx4 Sqmm armoured cable for PT 63 10. 4Cx4 Sqmm armoured cable for CT 64 48V 120AH Battery Bank San Tubular 65 48V SMPS Battery Charger (for 48V 120AH Battery Bank San Tubular Battery) 66 For 66kV Substation HVPNL Chaurmastpur 1. The supply of Numerical Line Current Differential-cum- Back up Distance Protection Relay in place of existing Distance Protection Relay on the existing C&R panels (non-SAS compliant) installed at 66kV S/stn. HVPNL, Chaurmastpur (for 66 kV D/C Chaurmastpur - Sullar Lines)2. The erection/ retrofitting, testing & commissioning of Numerical Line Current Differential-cum- Back up Distance Protection Relay in place of existing Distance Protection Relay on the existing C&R panels (non-SAS compliant) above at sr. no. 40 (1) installed at 66kV S/stn. HVPNL, Chaurmastpur shall be the part of scope of successful bidder. 67 For 66kV Substation HVPNL Layalpur Basti 1. The supply of Numerical Line Current Differential-cum- Back up Distance Protection Relay in place of existing Distance Protection Relay on the existing C&R panels (non-SAS compliant) installed at 66kV S/stn. HVPNL, Layalpur Basti (for 66 kV D/C Layalpur Basti – Sullar Lines).2. The erection/ retrofitting, testing & commissioning of Numerical Line Current Differential-cum- Back up Distance Protection Relay in place of existing Distance Protection Relay on the existing C&R panels (non-SAS compliant) above at sr. no. 41 (1) installed at 66kV S/stn. HVPNL, Layalpur Basti (for 66 kV D/C Layalpur Basti – Sullar Lines) shall be the part of scope of successful bidder. 68 Bolted type 11kV tension string assembly with 3 numbers Anti FOG type disc insulators (E&M strength 9000 kg) per string with all hardware accessories including ball & socket connections and tension clamp sets suitable for twin tarantulla conductor. Alternatively the bidder may quote silicon polymer composite insulator string in place of Disc Insulators 69 66 kV Bolted type tension string assembly with 6 numbers Anti FOG type disc insulators (E&M strength 9000 kg) per string with all hardware accessories including ball & socket connection and tension clamp set suitable for single zebra conductor. Alternatively the bidder may quote silicon polymer composite insulator string in place of Disc Insulators 70 66 kV bolted type tension string assembly with 6 numbers Anti FOG type disc insulators (E&M strength 9000 kg) per string with all hardware accessories including ball & socket connections and suspension clamp set suitable for Twin zebra conductor. Alternatively the bidder may quote silicon polymer composite insulator string in place of Disc Insulators 71 66 kV bolted type suspension string assembly with 5 numbers Anti FOG type disc insulators (E&M strength 9000 kg) per string with all hardware accessories including ball & socket connections and suspension clamp set suitable for Singlezebra conductor. Alternatively the bidder may quote silicon polymer composite insulator string in place of Disc Insulators 72 66 kV bolted type suspension string assembly with 5 numbers Anti FOG type disc insulators (E&M strength 9000 kg) per string with all hardware accessories including ball & socket connections and suspension clamp set suitable for Twin zebra conductor. Alternatively the bidder may quote silicon polymer composite insulator string in place of Disc Insulators 73 Boltless C-Type Wedge connectors matching with conductor size. 74 Copper lugs glands, PVC ferrules for control cabling. 75 Fiber cleats, Aluminium clamps, bolts, nuts, washers etc., for fixing control cables in trenches. 76 Galvanized iron perforated tray with side coupler plate bolts, nuts, washers and clamps etc. of size 75x25x2 mm, 150x25x2mm, 100x25x2mm etc. & G.I. Conduits of 50mm/100mm dia from equipment to main trench as per Section-7, Switchyard erection. 77 ACSR Zebra Conductor 78 AAC Tarantulla Conductor 79 7/3.15 GS Earth wire 80 Spacers for Twin Tarantullaand Twin Zebra Conductor 81 U-bolt 20mm dia. 82 Mandatory spares for hardware/mechanical/Electrical auxiliaries to be supplied. 10 % of the finally approved quantities for item mentioned from Sr. No. 68 to 72. 83 2.5 ″ dia HDD/PVC pipe for 4c x 4 mm2 c/cable from CT, VT to maintaining system as per sec-5. 84 Item for associated structure workA)‘Lattice type steel structure for 66 kV AIS Sullar. Supply of material, preparation of fabrication drawing, galvanizing and delivery of lattice type steel structure for tower and beams for 66/11KV switchyard fabricated from steel conforming to IS: 2062 including nuts-bolts gusset plates foundation bolts and other accessories as per drawings supplied by the owner:Main S/Stn. tower and beam:a)Tower type CT-4 85 b) Tower type CT-5 86 c) Tower type CT-6 87 d) Tower type CT-8 88 e) Beam type CB-6 89 f) Beam type CB-7 90 g) Tower type DT-2 91 h) Tower type DT-3 92 i) Beam type DB-2X 93 B) Equipment Structure:a) 66 kV CT Drg. No. HTD/ST-88R 94 b) 66 kV NCT Drg. No. HTD/ST-145 (if required ) 95 c) 66 kV PT Drg. No. HHW/ST-66 96 d) 66 kV Surge Arrestor Drg. No. HTD/ST-89 97 e) 66 kV Isolator Drg. No. HTD/ST-87R 98 f) 66 kV L&E Switch Drg. HTD/ST-87R 99 g) 11 kV NCT Drg. HTD/ST-149 (if combined structure used) or 11 kV NCT Drg. HTD/ST-88R (if required). 100 EARTH WORK :Earth filling with good earth (as per satisfaction of Executive Engineer/Civil Works Division), laying in layers (as per specification), dressing, including carriage, irrespective of lead, loading, unloading, watering and compaction in layers with roller including compensation of earth complete in all respect. 101 2. FOUNDATIONS:Supply of labour, T&P, material and construction of RCC footings & pedestals etc. for steel gantry and equipment structures complete in all respects as per technical specifications & approved drawings including cost of excavation, concreting, cement, reinforcement steel, form work, grouting, holding down bolts, backfilling etc.and other items not mentioned herein but required for the completion of work.A. GANTRY TOWERS66kV sidei) CT-4 102 ii) CT-5 103 iii) CT-6 104 iv) CT-8 105 33kV sidei) DT-2 106 ii) DT-3 107 B. EQUIPMENT 66kV sidei) 66KV LA 108 ii) 66KV CVT/PT 109 iii) 66KV NCT 110 iv) 66kV CT 111 v) 66kV L&E & Isolator 112 11kV sidei) 11kV NCT 113 3. BREAKER FOUNDATIONDesign, engineering, supply of labour, material, equipment & const. of foundations for breaker including all associated works PCC, RCC, structural steel, steel reinforcement & any other item not specifically mentioned herein but reqd. for completion of work as per tech. spec.i) 66 kV Breaker Foundation 114 4. CAPACITOR BANK FOUNDATIONSDesign, Engg. & supply of labour, material & construction of foundations for following rating capacitor bank with capacitor unit (with allied equipments) & series Reactor etc. including chain link fencing 1.8M height around cap. bank complete in all respect including any other items not specifically mentioned herein but required for completion of job as per technical specification.i) 9000KVAR 12.65 kV Capacitor Bank 115 5. TRANSFORMER FOUNDATION5.1 Design, Engg., supply of labour, material and construction of foundation for station transformer including all associated works, RCC, PCC, Reinforcement steel, misc. structural steel and other items not mentioned herein but required for the completion of work as per technical specifications.i) 11/0.4kV 200KVA Station T/F 116 5.2 Construction of transformer foundation including all associated works, RCC, PCC, reinforcement steel, misc. structural steel and other items not mentioned herein but required for completion of work as per technical specifications & approved drgs. In case extra foundation(s) has/have to be constructed (as per approved T/F drawing) to complete the job, nothing extra would be paid on this count.i) 25/31.5 MVA 66/11 kV T/F Foundation 117 6. CABLE TRENCHESSupply of labour, material such as cement, reinforcement steel, GI angles, flats, PCC & brick pillars below cable trenches for construction of Out-Door Cable Trenches (ODCT) of required depth/ type with pre-cast RCC covers including associated works like Cable Trench Culverts,crossings for roads and sump- pit-cum-pump chamber with 2HP motor of reputed make, starter, volt meter, amp-meter etc. as per foundation & trench layout plan attached, HVPNL drgs. & tech. specs. complete in all respect. i) D-type trench 118 ii) E-type trench 119 iii) G-type trench 120 iv) H-type Trench 121 v) GI Pipe 122 vi) Sump Pit Cum Pump Chamber 123 7. SITE SURFACING7.1 Providing, supplying & laying 100mm thick PCC (1:4:8) using 20mm nominal coarse aggregates and supplying & spreading 100mm thick layer of 40mm nominal size uncrushed/ crushed/broken stone pebbles over the PCC including construction of toe wall (exposed wall plastered with cement mortar 1:5) to hold 40mm single size uncrushed/ crushed /broken stone pebbles wherever required in the bays covered under the present scope as detailed in the GELO & instructions of engineer incharge. 124 7.2 Providing, supplying & laying 100mm thick in two layers of 50mm each of 20mm nominal size uncrushed/crushed/ broken stone pebbles gravel fill including dressing, rolling & compacting complete in all respects as per specs. & instructions of engineer incharge. 125 8. ROADS & PCC PAVEMENT8.1 Supply of labour, material and construction of cement concrete roads and walkways/shoulders from NH/SH/etc. to Switch yard/Switch house building as per GELO/CLO as per sectional detail drawing no. HCD/SK-181 R1 and technical specification.i) 6.0M wide road (Near main gate of substation) 126 ii) 3.66m wide road within substation land 127 iii) PCC in front and rear of parking area of SH Building as per tech. specification and drawing HCD/SK-172. 128 9. ROAD CULVERTSDesign Engineering and construction of Pipe culvert(s) at suitable locations under the approach road (from main PWD/ HUDA/Municipal/Village road to the sub-station entry point) including, cost of labour, material complete in all respects as per I.R.C. Standards. 129 10. BOUNDARY WALL10.1 Supply of labour, material and construction of front, C & U/C boundary walls including main gate foundations as per GELO/CLO, technical specifications. & HVPNL drg. HCD/TS-1176 R3 including excavation backfilling, lean & DPC complete in all respect.i) 6 ft. high with GI barbed wire on angles at top. 130 ii) 4½ ft. high front wall including providing grill at top of wall & construction of main entrance gate (with wicket gate). 131 iii) 4½ ft. side wall with GI barbed wire 132 10.2 Supply of labour, T&P, material and construction of front, side & U/C boundary walls including main gate(s) (brickwork below DPC level) as per GELO/CLO, tech. spec. & HVPNL drawings complete in all respects. 133 11. U/C FENCING & GATESProviding & fixing chain link fencing including foundations, GI angle iron posts and gate(s) complete as per electrical layout & tech. spec. & as per drawing attached. 134 12. DRAINAGE–CUM-RAIN HARVESTING SYSTEMThe successful bidder shall evolve design & drawing for drains, manholes with RCC covers andsettlement tankincluding preparation of drainage layout drawing for disposal of rain water from building’s roof top & switch yard (s/stn.) area into respective bore well(s) in such a way that there shall be no ponding of water on the roof and switch yard (s/stn.). The layout so developed shall be got approved from the employer. The location of sump-pit-cum-pump chamber shall preferably be locatedon corner(s) of the s/stn. and shall be got decided from the concerned XEN/Civil Works Division on the basis of surroundings of the substation(s). The successful bidder will also supply labour and material for construction of sump-pit-cum-pump chamber as per HVPNL drgs. & provide one no. non clog pump(s) of 5HP of reputed make capacity with main switch, starter, volt meter, Amp. Mtr. etc. (for each sump pit) for disposal of excess water to outfall point. Any other item(s) not mentioned herein but is/are required for completion of works shall be done by the successful bidder without any extra cost to the employer.i) Drain Section-1 135 ii) Drain Section-2 136 iii) Drain Section-3 137 iv) Road Crossing 138 v) Trench Crossing 139 vi) Sump Pit Cum Pump Chamber 140 13. CONTROL ROOM BUILDINGSupply of labour, material, T&P and construction of control room building complete in all respect as per tech. specs. including exterior weather proof paint, interior emulsion, all internal services like water supply including supply & providing of 5000ltr. capacity double layer Sintex/Diplast PVC tank, Sewerage system, electrification including wiring, modular switches, maximum 20W 4ft. long LED tubes with fittings minimum 1960 lumens, ceiling/exhaust fans, Finishing, Plinth protection, RCC flooring, Indoor trenches, Soakage pit near the switch house building, connection of sewerage system to Soakage pit/Sewerage system of local authorities (as applicable), connection to main water supply system of local authority, bore (Tubewell) (as applicable) etc. & any other item not mentioned herein but required for completion of works. 141 14. RCC M-20 inclusive of labour, material, shuttering, Steel reinforcement etc. complete in all respects to compensate excess quantity required to be executed due to difference in existing ground level and the formation level to be fixed after contouring or difference on account of revised drg issued at the time of construction and the tender drg.