BRR : 3673244 Tender For Repair / Maintenance Of Ht Overhead Lines And Ug Cable At Af Stn Suratgarh ; 1 Dismantling Existing Acsr Conductor Of Any Size / Type Form Pcc / Steel Poles Including Taking Down Ms Works Such As Cross Arms, Clamps, Hooks, Stay Etc From Overhead Line Complete All As Specified And Directed. 2 Taking Down Existing Old Cross Arms Of Ms Channel Or Angle Sections Etc Complete All As Specified And Directed. 3 Taking Down Old Unserviceable Insulators Any Type And Size From Poles Inlcuding For Reuse Or Removal Complete All As Specified And Directed. 4 Taking Out Old Unserviceable God Vertical / Horizontal Mounted Including Insulators And Operating Mechanism Complete All As Specified And Directed. 5 Taking Down / Removing Existing Steel Poles Ht / Lt For Shifting From Site Complete All As Specified And Directed.Note : Damaged Poles Shall Be Removed From Site As Per Direction Of Engineer-In-Charge. 6 Taking Down Existing Unserviceable Ht Cable Complete For Replacement All As Specified And Directed. 7 Excavation In Trenches Not Exc. 1.5 M Wide And Not Exc 1.5 Mtr Deep In Softloose Soil For Laying / Taking Up / Taking Down Of Cablesand Getting Out And Leveling Of Bottom Surface To Required Level Complete All As Specified And Directed. 8 Returning Filling In, Including Spreading, Leveling, Watering And Well Ramming Soil In Layers N.Exc 25 Cm Thick Complete All As Specified And Directed. 9 Removing Excavated Material ( I.E. Soil ) From Site To A Distance N. Exc 50 Mtrs Away And Depositing Where Directed At A Level N. Exc. 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. 10 Material And Labour For River Bed Fine Sand In Trenches / Ducts 15 Cm Under Cable And 8 Cm Above The Cable For Cushioning / Protection To Cable Including Spreding, Levelling And Get Thick 18 Cm After Hand Punning Complete All As Specified And Directed. 11 Supply And Laying Precast In Reinforced Concrete Cable Covers Hvp, Type-1 Flat Of Size 300Mm X 180 Mm X 40 Mm For Ht Cable Complete All As Specified And Directed. 12 Supply, Laying And Testing Ht Cable Xlpe Insulated, Screened Pvc Bedded Galvanised Steel Strip Or Wire Armoured, Electric Power Cables ( Heavy Duty ) With Stranded Aluminium Conductor, 11000 Volts Grade ( Earthed ) Cross Sectional Area 120 Sqmm 3 Core, Laid In Trenches, Through Pipe In Road Crossing, Ducts, Fixed Along Poles Complete All As Specified And Directed. 13 Supply, Laying And Testing Ht Cable Xlpe Insulated, Screened Pvc Bedded Galvanised Steel Strip Or Wire Armoured, Electric Power Cables ( Heavy Duty ) With Stranded Aluminium Conductor, 11000 Volts Grade ( Earthed ) Cross Sectional Area 95 Sqmm 3 Core, Laid In Trenches, Through Pipe In Road Crossing, Ducts, Fixed Along Poles Complete All As Specified And Directed. 14 Supply, Laying And Testing Ht Cable Xlpe Insulated, Screened Pvc Bedded Galvanised Steel Strip Or Wire Armoured, Electric Power Cables ( Heavy Duty ) With Stranded Aluminium Conductor, 11000 Volts Grade ( Earthed ) Cross Sectional Area 300 Sqmm 3 Core, Laid In Trenches, Through Pipe In Road Crossing, Ducts, Fixed Along Poles Complete All As Specified And Directed. 15 Material And Labour For Heat Shrinkable Type End Termination Joint Kit Indoor Type Suitable For Xlpe Insulated Ht Cable 11000 Volts Grade Of Size 120 Sqmm To 185 Sqmm 3 Core Complete With Jointing Material And Acessories Alongwith Testing After Jointing Including Taking Out The Old Unserviceable Join Kit Complete All As Specified And Directed. 16 Material And Labour For Heat Shrinkable Type End Termination Joint Kit Outdoor Type Suitable For Xlpe Insulated Ht Cable 11000 Volts Grade Of Size 120 Sqmm To 185 Sqmm 3 Core Complete With Jointing Material And Acessories Alongwith Testing After Jointing Including Taking Out The Old Unserviceable Join Kit Complete All As Specified And Directed. 17 Material And Labour For Heat Shrinkable Through Joint Kit Suitable For Xlpe Insulated Ht Cable11000 Volts Grade Of Size 120 Sqmm To 185 Sqmm 3 Core Complete With Jointing Material And Acessories Alongwith Testing After Jointing Including Taking Out The Old Unserviceable Join Kit Complete All As Specified And Directed. 18 Excavation Of Road Cutting By Manuallly Including Making Good To Disturb Surface After The Completion Of Work With Pcc 1:2:4 Type B-2 On Top Not Less Than 150 Mm Thick Including Levelling And Cambering According To Existing Road Surface, Refilling, Watering, Ramming Etc Complete All As Specified And Directed. 19 Supply And Fixing For Galvanised Iron Tubing 80 Mm Dia Light Grade With All Fitting Laid Under Floor / Road Crossing Or In Trenches Or Fixed To Pole / Walls With Clamps As Required Including Sealing Of Pipe Ends With Approval Sealing Compound Etc Complete All As Specified And Directed. 20 Supply And Fixing Lightening Arrestors Expulsion Type Complete With All Fittings, Suitable For 33000 Volts Grade Transmission Class, Discharge Capacity 65 Ka Including Brackets, Clamps, Nuts Washer And Connecting To 4 Mm Dia Gi Earth Wire Complete All As Specified And Directed. 21 Supply And Fixing Lightening Arrestors Expulsion Type Complete With All Fittings, Suitable For 11000 Volts Grade Transmission Class, Discharge Capacity 65 Ka Including Brackets, Clamps, Nuts Washers And Connecting To 4 Mm Dia Gi Earth Wire Complete All As Specified And Directed. 22 Supply, Fixing, Testing And Commissioning In Replacement Air Break Isolating Switch Tripple Pole Mechnically Operated With Vertical / Horizontal Isolation, 12 Insulators Mounted On Steel Frame With Operating Mechanism Worked From Ground Level And Including Operating Rod Of 25 Mm Dia Medium Grade Gi Pipe And Locking Arragement Of Capacity 400 Amps 11 Kv With Drop Out Fuse Set Including Making All Incoming / Outgoing Connection Of Ht Cable And Overhead Conductor Using New Leads And Nuts, Bolts Etc And Painting Of Steel Work Withtwo Coats Of Aluminium Paint Over A Coat Of Red Oxide Primer Complete All As Specified And Directed. 23 Repairing / Servicing The Air Break Isolating Switch Ht 33 Kv 200 / 400 Amps By Replacing The Defective Major Spares Including Provn Of Minor Bolts Nuts Etc Complete All As Specified And Directed. 24 Supply Only 33 Kv Air Break Switch Spares All As Directed. 25 Male Contact / Moving Contact Blade 26 Female Contract / Fix Contact Jaw 27 Rotating Contactor Pipe 200A / 400A 28 Ms Jumper Carrier 29 Back Connector Plate 30 Petroleum Jelly 31 Repairing / Servicing The Air Brak Isolating Switch Ht 11 Kv 200 / 400 Amps By Replacing The Defective Major Spares Including Provn Of Minor Bolts Nuts Etc Complete All As Specified And Directed. 32 Supply Only 11 Kv Air Break Switch Spares All As Directed. 33 Male Contact / Moving Contact Blade 34 Female Contract / Fix Contact Jaw 35 Tinned Copper Flexible Jumper 200A / 400A 36 Ms Jumper Carrier 37 Back Connector Plate 38 Petroleum Jelly 39 Supply And Fixing Cable Route Indicator For Ht Ug Cable Of 11000 Volts Bolted With 40 X 6Mm Flat Iron Member Of Height 0.60M And 80Mm Dia Ci Plate, Embeded In Pcc 1:3:6, Type C-2 Of Size 20 Cm X 20 Cm X 30 Cm Block Complete All As Specified And Directed. 40 Material And Labour For For Danger Notice Plate Of 1.6 Mm Thick Mild Steel Sheet Vitreous, Enamelled White With Letters, Figures And Conventional Skull And Bones In Signal Red Colour And Fixed With Ms Clamps Made Of 25X3mm Ms Flat, Bolts And Nuts For Ht 25X20cm Size Complete All As Specified And Directed. 41 Supply, Stringing And Fixing Acsr Conductor Of Any Type / Size On Existing Poles Including Fixing To Insulators With Binding Wire Or Aluminium Taps Complete All As Specified And Directed. 42 Supply & Fixing 11000 Volts Grade Disc Type Insulator Porcelain Vitreous 145 Mm Height, 255 Mm Dia Ball And Socket Type White Or Brown Or Green With Tension Clamps Complete All As Specified And Directed. 43 Supply And Fixing Pin Type Porcelain Vitreous White Or Brown Or Green Insulator Including One Galvanized Mild Steel Spindle, Two Galvanised Iron Washers And One Galvanised Iron Nut, 150Mm Height, 150Mm Dia For 11000 Volts Grade Complete All As Specified And Directed. 44 Disconnecting The Bindings Of Loose Overhead Conductor Of Ht Lines From Insulators And Restringing The Same For Proper Sag And Rebinding With New Aluminium Binding Wires At Insulators, Making All Jumpers And Inter Connections Of Conductors At Cut Points As Well As Turnings Using Pg Clamps Of Suitable Size As Per Size Of Conductor For Any Type Of Conductor Including Restringing Of Continuous Gi Earth Wire, Complete All As Specified And As Directed By Engineer-In-Charge.Note :- ( I ) Trimming Of Tree Branches Upto 3 M All Around The Conductors Is Deemed To Be Included In The Rates Quoted. ( Ii ) Three Acsr Conductors And Two Gi Earth Wire Will Be Measured As One Unit Length For Payment. ( Iii ) Cost Of Pg Clamps, Aluminium Winding Wire And Eye Hook For Gi Earth Wire Are Included In The Rates Coated For Restringing. 45 Material And Labour For Painting Of Steel Tubular Pole 11.0 M Long, By Applying Two Coats Of Aluminium Paint After Scraping / Brushing And Cleaning The Rust On Pole And Cross Arms. Aluminium Painting Will Be Done On Pole Above 1.5 M Height From Ground Level And Balance 1.5 M From Ground Level Will Be Painted By Alternate Layer Of Red And White Enammelled Paint ( 30 Cms Each ) Pole No Will Be Written On Pole By Black Paint In Yellow Circle Of 150 Mm Dia Complete All As Specified And As Directed By Engineer-In-Charge. 46 Material And Labour Preparation Of Old Painted External Surfaces Of Ht 4 Pole Structures Consisting Of Ht 11 Mtr Steel Pole, Cross Arms, God Assy With Pipe, Do Fuse Assy, Clamps Etc., Of Any Description And Applying One Coat Of Aluminium Paint By Mannualy All As Directed. Note : This Rate Inclusive Of Painting All Minor Items Such As Clamps, Brackets, Nuts, Bolts And Washers Which Is Not Particularly Mentioned In The Structures & Each Job Will Be Measured And Paid. 47 Material And Labour For Earthing Complete With Copper Plate Earth Electrode 600X600x3.15Mm Thick Buried Directly In Ground ( Earth Pit Not Less Than 2.25 Meter Below Ground Level ) With Top Edge Of The Plate Not Less Than 1.5 Metre Below Normal Ground Level Connected To Copperstrip 20X3mm At Two Points By Means Of Bolts And Nut, Check Nut And Washers Including Charcoal Dust, Common Salt, Necessary Excavation In Hard / Dense Soil, Returning Filling In And Removal Of Surplus Soilto A Distance Up To 50Metres, Pcc Pit In 1:3:6 Type Ci ( Using 20Mm Grade Stone Aggregate ) Rcc 1:2:4 Type B-1 ( Using 20Mm Grade Stone Aggregate ) 50Mm Thick Pit Cover, Reinforced With 8Mm Dia Tmtbars 75Mm C / C, Both Ways Ms Handle 12Mm Dia, Gi Funnel, Wire Mesh And Gi Watering Pipe Of 20Mm Bore Gi ( Light Grade ) And Earth Leadprotection Pipe 40Mm Bore ( Light Grade ) , Complete All As Specified And As Directed By Engineer-In-Charge, Directed And Shown In Electrical Plate No 3 Of Ssr Part-I Including Testing Complete.Note : Gi Strip And Protection Pipes 40 Mm Dia Gi Light Grade Pipe Up To 7.5 Metre Is Included In Unit Rate And Beyond That The Same Will Be Measured Separately. 48 M&L For Earthing Complete With Galvanised Steel Plate Earth Electrode 600X600x6mm Thick Buried Directly In Ground ( Earth Pit Not Less Than 2.25 Meter Below Ground Level ) With Top Edge Of The Plate Not Less Than 1.5 Metre Below Normal Ground Level Connected To Gi Strip 32X6mm At Two Points By Means Of Bolts And Nut, Check Nut And Washers Including Charcoal Dust, Common Salt, Necessary Excavation In Hard / Dense Soil, Returning Filling In And Removal Of Surplus Soilto A Distance Up To 50Metres, Pcc Pit In 1:3:6 Type Ci ( Using 20Mm Grade Stone Aggregate ) Rcc 1:2:4 Type B-1 ( Using 20Mm Grade Stone Aggregate ) 50Mm Thick Pit Cover, Reinforced With 8Mm Dia Tmtbars 75Mm C / C, Both Ways Ms Handle 12Mm Dia, Gi Funnel, Wire Mesh And Gi Watering Pipe Of 20Mm Bore Gi ( Light Grade ) And Earth Leadprotection Pipe 40Mm Bore ( Light Grade ) , Complete All As Specified And As Directed By Engineer-In-Charge, Directed And Shown In Electrical Plate No 3 Of Ssr Part-I Including Testing Complete.Note : Gi Strip And Protection Pipes 40 Mm Dia Gi Light Grade Pipe Up To 7.5 Metre Is Included In Unit Rate And Beyond That The Same Will Be Measured Separately. 49 Taking Out The Existing Ht 5 Mva Avr Unit 11000 Volts Grade Of Make Yule Brentford Carefully By Dismantling All Incoming & Outgoing Elect / Mechnical Connections Reputed Work For Using Suitable Tools & Plants, Opening The Body Of Buck Booster / Avr Units Find Out The Defects And Servicing, Repair / Removing Incl Replacing The Defective Spare Parts And Re-Assembling Complete All As Specified And Directed. ( New Winding Will Be Measured And Paid Under Relevent Item Of This Schedule ) . The Job Involves The Following: ( A ) Disconnecting All Electrical / Mechnical Connection From Both Side Of Ht. ( B ) Opening The Body Of The Avr / Buck Booster Units Complete, Drain Out The Oil, Lift The Cover And Coil Assembly, Checking The Serveability State Of Spares Such As Moving Carbon Roller, Windings, Insulating Oil, Ht Elect Connections, Ht Bushings, Ht Brass Terminals, Tig & Tag Connectors, Chain Rack, Limit Switch, Bearings, Couplings, Motor, Mirco Processor Based Pcb Card, Ct / Pt Assy, Aux / Reverible Contactors, Winding / Oil Temp / Buchloz Relays Assy, Earthing Connections, Copper Strip, Etc. And Repair / Replace The Same Of Existing Model / Make And Making Fully Serviceable State Of Avr / Buck Booster Assy At Site Incl Testing As Per Oem Specifications Complete All As Specified And Directed. ( C ) Cleaning The Core Laminations Assembly By Oil Complete, Removign The Carbon Sediments / Dust In The Coil And Core Gently Without Making Any Damage To Coil And Core. ( D ) Re-Assembling All Dismantled Parts Including Provision Of New Gasket, Nut, Bolts, Refilling With Transformer Oil Including Electric / Mechnical Connection Testing And Commissioning Complete. 50 Supply Only Moving Carbon Rollers Of Existing Size And Make Suitable For 5 Mva Avr Unit 51 Supply And Fixing Tig & Tag Brass Connector Suitable For 5 Mva Avr Unit Complete All As Specified And Directed. 52 Supply And Fixing Chain Rack ( Double ) Including Bearing Complete All As Specified And Directed. 53 Supply And Fixing Limit Switch Suitable For 5 Mva Avr Unit Complete All As Specified And Directed. 54 Supply And Fixing Synchoronous Motor Suitable For 5 Mva Avr Unit Complete All As Specified And Directed. 55 Supply And Fixing Reversible Contactor 3 Pole 800 Amps Suitable For 5 Mva Avr Unit Complete All As Specified And Directed. 56 Supply And Fixing Buchloz Relay Assy Complete Suitable For 1600 Kva Avr Unit / Transformer Complete All As Specified And Directed. 57 Supply And Fixing Aux Contactor Suitable For 5 Mva Avr Unit Complete All As Specified And Directed. 58 Material And Labour For Filteration And Dehydration Of Transformer Oil By Dehydration Machine To Achieve The Die-Electric Strength / Insulation Value Upto 65 Kv / 40Kv ( Rms ) At Standard Gap Of Electrodes 2.5 Mm For One Minute In 5 Mva Capacity Of Avr Transformers 11 Kv Including Insulation Testing Of Oil With Help Of Suitable Equipments Before And After Dehydration Including Bdv Test Complete All As Specified And Directed.Note : ( I ) Contractor Will Have To Arrange The Dehydration Machine And Transfomer Oil Dielectric Strength Testing Equipment As Mentioned And Same Shall Be Deemed To Be Included In The Item Rate Quoted. ( Ii ) Test Result Of Transformer Oil Before And After Dehydration Is Required To Submit By Contractor Duly Signed By All Concerned. ( Iii ) The Contractor Shall Ensure That Hte Conservator Tanks Are Full To Its Level Before Commencement Of Dehydration Process. ( Iv ) Additional Quantity Of Transformer Oil If Any Required For Making The Oil Level Upto The Requirement In Transformer Shall Be Measred And Paid Separately As Supply And Filling But Is Cost Of Heating Shall Be Deemed To Be Included In The Rate Quoted For Above Item. 59 Supply And Filling Transformer Power Oil Meeting Iec 60296-2003-11, 3Rd Edition Standard Specification Astmd 1275B Test Requirements For Corrosive Sulpher Of Bdv Not Be Less Than 40 Kv At 2.5 Mm Gap For Reduced Level Of Transformer Due To Evaporation / Leakage / Losses Due To Dehydration In Ht 33 Kv Transformer / Ht 11 Kv Avr To Filling In Distribution Transformer Ht 33 / 11 Kv And 11 Kv Avr All As Specified And Directed. 60 Supply And Replacing Of Silica Gel Crystel Filled In The Breather Of Capacity Suitable For 5Mvaavr Transformer Complete All As Specified And Directed.

BRR : 5170661 Maintenance Activities Including Housekeeping And Electrical Activities At Cpcl Cbr-Panangudi And Iocl Cbmt-Muttam Housing Complex In Nagapattinam , Housekeeping Activities In Cpcl Housing Complex - Panangudi Village: Scope Includes Supply Of Manpower To Carryout Works On Daily, Weekly & Monthly Basis As Per The Sor / Scope Of Work Requirements. Rate Includes All Cleaning Tools Like Broom, Access Tools Ladders, Vehicles For Disposal Of Debris As Mentioned In Scope Of Work & Supply, Min Wages, Esi / Pf, Pt, Bonus Etc. As Per Recent Govt. Regulations, 3 Sets Of Uniform With Requisite Ppes. Jobs Has To Be Carried Out In Cbmt Quarters On Need Basis. Payment Will Be Made Upon Actual Works Done And It Shall Be Ensured That The Specified Workmen Is Available In Shifts As Specified And No Over Time Charges Will Be Paid By Cpcl. Compesation Clause As Per Gccclause 5.3.5 Is Not Applicable For This Contract , Supply Of Highly Skilled Supervisor With Minimum Diploma In Civil With 2 Years Of Experience In General Shift For Coordinating With All Activitiesand Reporting To Eic On Daily Basis. A Dedicated Mobile / Landline Phone Should Be Available In Maintenance Office Room For Communication Purpose , Supply Of Class-1 Electrician Possessing “B / C” License Issued By Ceig, Electrical Inspectorate. Tamilnadu Or Minimum 5 ( Five ) Years’ Experience For Round The Clock Services To Carry Out Electrical Works In Building & Substations Cost Includes All Tools And Tackles Required By Electrician To Carryout His Day Today Activities Unit Day Corresponds To One Shift Of 8 Hrs Duration , Supply Of Class-1 Plumber With Minimum 5 ( Five ) Years’ Experience In General Shift To Carry Out All Plumbing Related Works In Water Supply As Well As Sewage Network In Entire Housing Complex Cost Includes All Tools And Tackles Required By Plumber To Carryout His Day Today Activities , Supply Of Semi-Skilled – Operator For Ro & Stp Plant, Water Filling In Tanks Of All Buildings With 10Th / ( + ) 2 Qualification + Minimum 5 ( Five ) Years’ Experience In General Shift Cost Includes All Tools And Tackles Required By Operator To Carryout His Day Today Activities Unit Day Corresponds To One Shift Of 8 Hrs Duration , Semi - Skilled Electrical Helper With 10Th / ( + ) 2 Qualification + Minimum 5 ( Five ) Years’ For Round The Clock Services To Carry Out Electrical Works In Building & Substations Cost Includes All Tools And Tackles Required By Electrician To Carryout His Day Today Activities Unit Day Corresponds To One Shift Of 8 Hrs Duration , Unskilled Helper ( Scavenger ) Forround The Clock Services For Assisting For All Housekeeping, Toilets Cleaning &Plumbing Related Works In Water Supply As Well As Sewage Lines In Entire Housing Complex Cost Includes All Cleaning Essentials Like Brooms, Mops Etc. Required By Workman To Carryout His Day Today Activities. Cleaning Chemicals Are Excluded From Scope Of Supply , Providing House Keeping Services In Executive Hostel: Daily – Sweeping, Cleaning & Wet Mopping Of Common Areas & Occupied Rooms In Ex. Hostel Including Toilets, Dining Hall, Tv Room & Kitchen. Collection Of Garbage From All Rooms & Disposing Of In Common Point. Gardening Activities In Front Of Guest House & Ex. Hostel. Service To Be Provided In Morning And Evening Shift. Cost Includes All Cleaning Essentials Like Spade, Shovel, Trimming & Other Garden Related Accessories Etc. Required By Workman To Carryout His Day Today Activities. Weekly – Cleaning Of Common Area Walls, Ceiling & Furniture Vacuum Cleaning Of Beds & Curtains, Toilets Cost Includes All Cleaning Essentials Like Brooms, Mops Etc. Required By Workman To Carryout His Day Today Activities. Cleaning Chemicals Are Excluded From Scope Of Supply Vaccum Cleaner To Be Handed Over To Cpcl At The End Of Contract Unit Day Corresponds To One Shift Of 8 Hrs Duration , Providing Housekeeping Services In External Areas Services As Per Following: Guest House With Car Park, Ex. Hostel With Car Park, Community Hall, Security Cabin, Maintenance Building Area, Substation ( Inside & Outside ) , Stp & Ro Plant Areas, D & D-1 Block, C Block, B Block, A Block Etc. Daily – Sweeping, Cleaning Of All Paved / Unpaved Areas, Removal Of Unwanted Materials Including Dead Animals Around The Building Upto Roads, Collection Of Garbage From Houses & Disposing Of In Common Point Weekly - Cleaning Of Toilet Of Alloccupied Houses Monthly – Cleaning Of Roofs On Need Basis - Cleaning Of Manholes Cost Includes All Cleaning Essentials Like One Tricycle, Ladders, Brooms, Spade, Shovel, Trimming & Other Related Tools Etc. Required By Workman To Carryout His Day Today Activities. Unit Day Corresponds To One Shift Of 8 Hrs Duration , Sweeping Of Main Branch Roads Upto Storm Water Drain, Paved Approaches With 1 M On Either Side. Main Road And Paved Approached Has To Be Cleaned With Manual Sweeping Machines ( 2 Nos ) And Disposal To Be Done In Common Point. Road Sweeping Machine To Be Handed Over To Cpcl At The End Of Contract , Providing Of 6000 Liters Capacity Water Tanker In General Shift For Transportation Of Ro Drinking Water From Cbr Housing Complex To Cbr / Cbmt Terminal / Housing Complex Or Vice Versa As Per Directions Of Eic. Scope Includes Providing Tanker With Driver Cum Operator, Collection Of Water From Ro Plant In Cbr Housing Complex, Transporting To Refinery Premises And Unloading In Tanks Of Various Locations As Per The Directions Of Eic. Cost Includes Operator Wages, Fuels, Maintenance Of Vehicles Etc. , Housekeeping Activities In Iocl Housing Complex - Muttam Village: Guest House With Car Parks, Substation ( Inside & Outside ) , A Block, B Block, C Block & D Block And Other Areas Daily – Sweeping, Cleaning Of All Paved / Unpaved Areas, Removal Of Unwanted Materials Including Dead Animals Around The Building Upto Roads, Collection Of Garbage From Houses & Disposing Of In Common Point Sweeping Of Main & Branch Roads Upto Storm Water Drain, Paved Approaches With 1 M On Either Side Such That The Grass Do Not Grow Above 2 Inches From Ground Level At Any Point Of Time. Road And Paved Approached Has To Be Cleaned With Manual Sweeping Machines And Disposal To Be Done In Common Point Weekly - Cleaning Of Toilet Of All Houses Including Occupied And Unoccupied Houses Monthly – Cleaning Of Roofs, Overhead Tanks Of Houses, Storm Water Drains In All Areas , Supply Of Unskilled Class Labourto Carry Out Petty Works Not Assessable For Measurements / Minor Repair Works, On Day-To-Day Basis During The Cpcl General Shift Hours ( 0830- 1700 Hours ) On All Regular Working Days From Monday To Saturday. The Rates Shall Include Esi, Pf, Payroll Cost And Allowances, Fringe Benefits, Overhead Supervision, Profits And Hand Tools. Payment For Part Of The Day Will Be Made On Prorata Basis. , Supply Of Skilled Class Labourto Carry Out Petty Works Not Assessable For Measurements / Minor Repair Works, On Day-To-Day Basis During The Cpcl General Shift Hours ( 0830- 1700 Hours ) On All Regular Working Days From Monday To Saturday. The Rates Shall Include Esi, Pf, Payroll Cost And Allowances, Fringe Benefits, Overhead Supervision, Profits And Hand Tools. Payment For Part Of The Day Will Be Made On Prorata Basis. , Supply Of Housekeeping Consumables , Disinfectant Floor Cleaner, 5 Liter Bottle Can Reckitt Benckiser / Hindustan Unilever Limited / S.C. Johnson & Sons , Glass Cleaner, 500Ml Capacity Spray Bottle Reckitt Benckiser / Hindustan Unilever Limited / S.C. Johnson & Sons , Toilet Cleaner, 1 Liter Bottle Can Reckitt Benckiser / Hindustan Unilever Limited / S.C. Johnson & Sons , Liquid Hand Wash Solution, 1.5 Liter Pouch Reckitt Benckiser / Hindustan Unilever Limited / Godrej Consumer Product Ltd / Colgate- Palmolive India Ltd / Itc Ltd , Naphthalene Balls , Bleaching Powder , Phenyl Liquid, 1 Liter Bottle , Small Garbage Bins Of Plastic Body Min 5 Lt , Nilkamal 240 Ltr Blue Heavy Duty Wheel Waste / Garbage Bin Wb-240 , Grass Cutting Works , Clearing Grass And Disposal Of Rubbishoutside The Cpcl / Iocl Housing Complex Premises. Rate Includes All Labor, Materials, Vehicles Etc. , Trimming & Prunning Of Trees Ht 5M To 8M , Felling Trees Of The Girth ( Measured At A Height Of 1 M Above Ground Level ) , Including Cutting Of Trunks And Branches, Removing The Roots And Stacking Of Serviceable Material And Disposal Of Rubbishoutside The Cpcl / Iocl Housing Complex Premises. Rate Includes All Labor, Materials, Vehicles Etc. , Beyond 30 Cm Girth Upto And Including 60 Cm Girth , Beyond 60 Cm Girth Upto And Including 120 Cm Girth , Civil Sor , Earthwork In Excavationinall Types Of Soil , Includingsoft Or Hard Murrum, But Excluding Soft And Hard Rock, Using Mechanical Means ( Hydraulic Excavators ) / Manually For Depth Upto 1.5M, Including Removal Of Vegetation, Shrubs And Debris, Cutting And Dressing Of Sides In Slopes, Levelling, Grading And Ramming Of Bottoms, Dewatering Of Accumulated / Sub-Soil Water From Any Source And Keeping The Surface Dry For Subsequent Works And Disposal Or Stacking Of Excavated Material Within A Lead Of 100M, As Directed Including Providing Temporary Supports To Existing Service Lines Like Water Pipes, Sewage Pipes, Electricunderground Cables, Etc.All Complete As Per The Specifications And Directions Of Engineer-In-Charge. , Providing And Filling Fine Aggregate ( M-Sand ) Of Approved Quality In Floor, Foundation Etc. In Layer Of 15 Cm Thickness Including, Watering, Ramming, Consolidating Etc. Complete. , Dewatering - With Diesel Dewatering Pump: The Job Involves Pumping Out Of Water Including Dewatering Oily Trenches, Pits Etc. By Contractors Own Pump As Per The Direction Of The Engineer-In-Charge. The Job Also Includes Supplying Of All Types Of Pumps, Tools & Tackles, Hoses, Fuel, All Consumables And Labor To Complete The Job In All Respects As Per Eic Instructions , Dismantling Rcc Work By ( Taking All Necessary Safety Precautions ) Manually / By Mechanical Means For All Depth And Height, Below And Above Plinth Level Including Supply Of Tools & Tackles, Necessary Scaffolding, Propping, Cutting Reinforcement Bars, Breaking Into Pieces, All Labor, Etc., Cleaning And Disposal Of Unserviceablematerial Outside Township And Returning The Scrap Reinforcements To Scrap Yard Within The Refinery Premises As Per Instruction Of Engineer In Charge, All Complete. , Transporting And Disposing The Surplus Earth / Debris Generated After Backfilling From Construction Activities, Loading, Unloading, As Directedplace Outside Township Premises. , Providing And Fixing Form Work Including Centering, Shuttering And Strutting And Propping So As To Give A Rough Finish For In-Situ Reinforced Cement Concrete And / Or Plain Cement Concrete Work In Foundation And Plinth Like Footing, Raft, Basis Of Column, Pipe Supports, Equipment Foundations, Mass Concrete Etc. For All Depths Including Removal Of Shuttering After The Specified Period Is Over And As Directed By The Engineer In Charge. Complete With All Materials Labors Consumable Etc. ( Form Work Shall Be Supplied By The Contractor And Shall Remain The Property Of The Contractor ) , Providing And Placing In Position Reinforcement Hot Rolled Deformed Bars And / Or Tor Steel Of Grade Fe 500D For Rcc Work Including Transporting The Steel To Site Of Work, Straightening, Cleaning & Removing Oil Grease If Any, Cutting, Bending To Required Shapes & Lengths As Per Details, Binding With Contractors Own 16 Swg Black Soft Annealed Binding Wire At Every Inter-Section, Supplying & Placing With Proper Cover Blocks, Supports, Chairs, Overlaps, Welding, Spacers Fan Hooks Etc. ( Return All Unused / Scrapped / Unserviceable Steel To Owners Storage Point ) For All Heights & Depths Etc. All Complete As Directed. Cost Of Reinforcement Steel Is Included In Contractors Scope. , Providing And Laying Reinforced Cement Concrete Work 1:1.5:3 ( 1 Cement, 1.5 Fine Aggregate ( M Sand ) , 3 Stone Aggregate 20Mm Nominal Size ) In Foundation And Plinth Including Machine Mixing, Curing, Consolidating With Vibrator Etc. Complete As Per Instruction Of Engineer In Charge Excluding Cost Of Shuttering And Fabrication Of Reinforcement. , Providing And Laying Brick Masonry In Sub Structure With Bricks Ofclass 5.0 In Cement Mortar 1:4 ( 1 Cement And 4 Fine Aggregate ( M Sand ) ) For All Depths Including The Cost Of Materials, Labor, Tools And Tackles, Scaffolding / Staging, Sampling And Testing, Soaking Of Bricks, Cutting And Laying Of Bricks, Providing Recesses, Finishing The Joints Flush Below Ground Level , Curing, Etc. All Complete As Per Specifications, And As Directed By Engineer-In-Charge. , Providing 12Mm Thick Plaster In Cement Mortar 1:4 ( 1 Cement :4Fine Aggregate ) On Walls / Concrete Surfaces Including Cleaning, Hacking Of Concrete Surfaces, Scaffolding, Finishing, Curing Etc., For All Heights. , Providing And Laying Polished Vitrified Floor Tiles Of Size 600 X 600 Mm And Above Anti Skid Type / Gloss Finish Of Make Johnson / Kajaria / Somany / Nitco In All Colors And Shades, Laid On 20 Mm Thick Cement Mortar 1: 4 ( 1 Cement : 4 Fine Aggregate ( M Sand ) ) Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. ( Supply Of White Cement Is In Contractors Scope ) . , Providing And Fixing Ceramic Glazed / Matt Finished Wall Tiles Of Make Johnson / Kajaria / Somany / Nitcoin All Colors, Shades Of Size 600 X 300 Mm And Above As Approved By Engineer-In-Charge Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Fine Aggregate ( M Sand ) ) And Jointing With Grey Cement Grout Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. ( Supply Of White Cement Is In Contractors Scope ) . , Providing And Fixing Granite Tiles Of Shade Black Galaxy / Equivalent Of Thickness Not Less Than 18 Mm Approved By Eic Over 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Fine Aggregate ( M Sand ) ) And Nozing On Both Sides. , Providing And Fixing 20 Mm Thick Cuddappah Stone Of Shade Black / Equivalent Of Thickness Not Less Than 20 Mm As Approved By Eic Over 20 Mm Thick Bed Of Cement Mortar 1:4 ( 1 Cement : 4 Fine Aggregate ( M Sand ) ) And Nozing On Both Sides. , Providing & Applying Wall Painting In Exterior Surfaces: Surface Preparation By Water Jetting And Sander, Supply And Application Of Single Coat Of Wall Primer And Two Coats Of Exterior Emulsion. Rate Inclusive Erection Of Scaffolding / Movable Safety Harness Like Parapet Anchor For All Heights / Depths, All Tools, Materials, Labor Etc. Paint Of Make Asian Paints Apex Advanced Dust Proof Or Equivalent Of Nerolac / Dulux / Nippon / Berger Only To Be Used , Providing & Applying Wall Painting In Interior Surfaces: Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc ( Volatile Organic Compound ) Content Less Than 50 Grams / Liter Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required To Achieve Even Shade And Color. Two Coats Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc ( Volatile Organic Compound ) Content With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams / Liter. Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Removing White Or Color Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete Paint Of Make Asian Paints Apcolite Premium Emulsion Or Equivalent Of Nerolac / Dulux / Nippon / Berger Only To Be Used , Providing & Applying Enamel Painting For Masonry / Metal / Woodensurface : Surface Preparation, Supply And Application Of Metal Primer Of Zinc Base / Wood Primer / Wall Primer And Two Coats Of Synthetic Gloss Enamel Paint. Rate Inclusive Of Movable Safety Harness For All Heights / Depths Paint Of Make Asian Paints Apcolite Premium Gloss Enamel Or Equivalent Of Nerolac / Dulux / Nippon / Berger Only To Be Used , Providing And Injecting Chemical Emulsion For Post- Constructional Anti-Termite Treatment Using Chemical Imidacloprid 30.5% Sc At 2.1Ml Per Liter Of Water Covering Entire Building Internal As Well As External Wall. The Quoted Rate Shall Be Inclusive Of All Tools, Tackles, Labors, Chemical / Material Cost Etc. Complete. , Supplyingandfixing Inposition35mm Thick Single Or Double Leaf Fullpaneled Woodenshutters Of Firstclasscountry Wood, Consistingof Bottomrail 250Mm Wide, Lock Rail 150Mm Wide And Remaining Shall Be 100Mm Wide, Fixed With Panels Of 25Mmthick Wooden Plankincludingwith Black Enameled Ms Butt Hinges With Necessary Screws, Providingtwocoats Of Syntheticenamelpaint Over Acoatof Primer Etc., Complete. , Providing And Fixing Kiln Seasoned And Chemically Treated Hollock Wood For Doors, Windows, Cupboards, Air Conditioners, Frame Work For Partition And Ceiling Or Any Wooden Work With Necessary Fixtures And Fastenings Including Necessary Hold Fasts, Polishing Teak Frame Or Painting Frame With Transparent Paint, Applying Two Coats Of Coal Tar Preservatives On The Sides In Contact With Wall For Fames ( And For Ceiling Frame While Surface To Be Coal Tarred ) Including Making Necessary Grooves, Grouting, Making Good All Damages Done Inclusive Of All Labor, Material Etc. Complete. , Providing And Fixing Window / Ventilator / Door Glass Panes With Float / Pinned Glass Of Thickness 4 Mm, Fixing With Necessary Pins And Best Quality Putty Or With Wooden Batten As Necessary Including Removing Old Damaged Glass, Disposing Of The Same As Directed All Labor And Materials Etc. Complete At All Heights. Orin Wooden / Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Pvc / Neoprene Gasket Etc. Complete As Per The Architectural Drawing And The Directions Of Engineer-In-Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) , Providing And Fixing Godrej Mortise Locks Neh 07-240 Mm Satin Steel Door Handle With Lock Set 2C, Silver Or Equivalent , Providing And Fixing Stainless Steel Door Handles Of Grade 304 Of Approved Design , Providing And Fixing 18Mm Thick Prelaminated Medium Density Fibre Board Interior Grade ( Prelaminated On Both Sides ) In Cupboard Shutters And Frames Including Ss Hinges, Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge. , Providing And Fixing Fiber Glass Reinforced Plastic ( Frp ) Door Frames Of Cross-Section 90 Mm X 45 Mm Having Single Rebate Of 32 Mm X 15 Mm To Receive Shutter Of 30 Mm Thickness. The Laminate Shall Be Molded With Fire Resistant Grade Unsaturated Polyester Resin And Chopped Mat . Door Frame Laminate Shall Be 2 Mm Thick And Shall Be Filled With Suitable Wooden Block In All The Three Legs. The Frame Shall Be Covered With Fiber Glass From All Sides. M.S. Stay Shall Be Provided At The Bottom To Steady The Frame. , Providing And Fixing To Existing Door Frames 30 Mm Thick Glass Fiber Reinforced Plastic ( Frp ) Paneled Door Shutter Of Required Color And Approved Brand And Manufacture, Made With Fire - Retardant Grade Unsaturated Polyester Resin, Molded To 3 Mm Thick Frp Laminate For Forming Hollow Rails And Styles, With Wooden Frame And Suitable Blocks Of Seasoned Wood Inside At Required Places For Fixing Of Fittings, Cast Monolithically With 5 Mm Thick Frp Laminate For Panels Conforming To Is: 14856, Including Fixing To Frames. , Supply And Fixing Of Upvc White Color Ventilators With 4Mm Glass And Necessary Accessories As Per The Directions Of Eic Including Necessary Labor, Tools, Tackles Etc. , Providing And Laying 4 Mm Thick App ( Atactic Polypropylene ) Modified Reinforced Bituminous Waterproofing Membrane Over Terrace And Parapet Including Cleaning And Preparation Of The Surface Consisting Of Making Good All The Cracks And Damages, Filling Potholes / Depressions, Removing Weak Foam Concrete / Plaster And Refilling With Same Wherever Required Thus Preparing Smooth Surface Of The Terrace, Providing And Applying One Coat Of Cold Applied Bitumen Based Primer @ 0.2 To 0.4 Liter Per Sq.M.; Laying The Membrane By Torch Welding Over Primer, Providing 100 Mm Overlaps And Appropriately Pressing The Membrane To Remove Any Entrapped Air, Including Fixing On Parapet After Providing 10 Mm X 20 Mm Continuous Groove In Parapet For Terminating The Membrane And Filling The Groove With Polyurethane Sealant And Continuing This Treatment At Rain Water Outlet Points; Providing Finishing Protective Layer Of 35 Mm Thk. Pcc ( 1:2:4 ) In Panels Of Maximum Size 1200 Mm X 1200 Mm Chequered Finish With 24 Swg Chicken Wire Mesh Interposed In Between Finished Smooth With Joints Between Panels Sealed With Suitable Polyurethane Sealant; Providing Fillets Of 75 Mm Radius With P.C.C ( 1:2: 4 ) At Junctions Of Horizontal And Vertical Surfaces Finished Smooth; Providing 450 Mm X 450 Mm Khuras ( Rain Water Collecting Pits ) In 1:2:4 Cement Concrete At All Outlets, Leveled Down By Min. 25 Mm, Finishing, Curing Etc. All Complete As Per Approved Manufacture’S Standard Specifications And Recommendations. , Providing Injection Type Post Construction Water Proofing To Concrete Structures Such As Roof Slabs, Sunken Portions, Intersection Of Chajja & Masonry, Liquid Storage Tanks, Etc. By Installing Minimum 12 / 15Mm Dia Pvc / Aluminium / Gi Nozzles At Suitable Intervals And Mechanically Injecting Single Component Hydrophobic Water-Active Flexible Polyurethane Of Approved Make At Minimum Pressure Of 3 Kg / Sqcm As Per Manufacturers Recommendations. The Rate Shall Include All Materials, Labor And Operations And Finishing, Dismantling & Assembling Of False Ceiling / Under Deck Insulation Works If Any, Making Temporary Water Pool Over The Leaky Portion And Removal After Work, Include The Cost Of Providing Fixing And Cutting Off Nozzle Projections Grouting Holes, Etc. Complete As Per The Instructions Of Engineer-In-Charge. ( Only Consumed Chemical In Grouting Work To Be Measured For Payment ) , Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes - Class 1 Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing For Non-Embedded Works. This Includes Jointing Of Pipes & Fittings With On Step Cpvc Solvent Cement And Testing Of Joints, Scaffolding Complete As Per Direction Of Engineer-In-Charge For Pipes Of 1 / 2 Dia - For Concealed As Well As Open Lines , Same As Item Above, But For Pipes Of Dia 3 / 4 Concealed As Well As Open Lines , Same As Item Above, But For Pipes Of Dia 1 Concealed As Well As Open Lines , Providing And Fixing Rigid Pvc Pipes As Rain Water Pipes, Weep Hole Pipes Etc. With Ms Holder Clamps Including Fixing / Embedding Into Masonry / Concrete, Providing Connections Like Shoes, Vents, Specials, Bends Etc. Fixing In Perfect Plumb Etc. All Complete Including Jointing With Bonding Solution Of Approved Quality And Make With Pressure Rating Of 4 Kg / Sq.Cm Including Clamps, Connections, Etc. Complete As Per Specifications And As Directed By Engineer-In-Charge. , Same As Item Above, But For Pipes Of Dia 2.5 , Same As Item Above, But For Pipes Of Dia 3 , Same As Item Above, But For Pipes Of Dia 4 , Same As Item Above, But For Pipes Of Dia 6 , Supply And Fixing Of Sintex Or Equivalent Make Underground Pvc Septic Tanks Black Color Along With Allied Accessories Including Transport And Labor For Shifting And Placing Is Position. Earth Work And Connection Lines Will Be Paid Separately , Supply And Fixing Of Sintex Or Equivalent Make Underground Pvc Septic Tanks Black Color Along With Allied Accessories Including Transport And Labor For Shifting And Placing Is Position. Earth Work And Connection Lines Will Be Paid Separately , Providing And Fixing 600 X 450Mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6Mm Thick Hard Board Ground Fixed To Wooden Cleats With Cp Brass Screws And Washers Complete. , Providing And Fixing P.V.C. Waste Flexible Pipe 32 Mm Dia For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. , Braided Hose For Geyser Connection: Supply And Fixing Polymer Braided Connecting Hoses With Washers, Rings Fixtures Etc. For Hot Or Cold Water From Geyser Etc. Of Jaguar / Watertech Or Equivalent Make As Directed By Eic With Necessary Fittings, Etc. Complete , Providing And Fixing 20 Mm Float Valve With Reducer If Required Of Approved Make , Supply And Fixing Ofwash Basin Without Pedestal Dimensions : 590X465x175mm Of Make Johnson G3715pw0403 Or Equivalent Of Make Parryware / Hindware Including Wall Mount Bolts All Necessary Labor, Tools Etc. , Supply And Fixing Ofruby Ss204 Kitchen Sink ( 24X18” ) With Waste Coupling Outer Dimensions : 610X450mm Bowl Dimensions : 550X390x225mmof Make Johnson K1010404wc Or Equivalent Of Make Parryware / Hindwareincluding All Necessary Labor, Tools Etc. , Supply And Fixing Ofruby Concealed Trap Ewc : 360X575x410mmof Make Johnson P0448pw0101or Equivalent Of Make Parryware / Hindwareincluding All S Traps, Seat Cover, Necessary Labor, Tools Etc. , Supply And Fixing Ofiwc Ruby Orissa Pan 23” ( Open Rim ) Dimensions : 450X580x255mmof Make Johnson P0461pw0400 Or Equivalent Of Make Parryware / Hindwareincluding All S Traps, Necessary Labor, Tools Etc. , Supply And Fixing Ofsega Dual Flow Health Faucet With 1Mts Ss304 Braided Hoseof Make Johnson S0901c Or Equivalent Of Make Parryware / Hindwareincluding All Necessary Labor, Tools Etc. , Supply And Fixing Of Shower Arm With Roseof Make Johnsonshower Arm ( Round ) ( S0023c ) And Royal Single Flow Overhead Shower 100 Mm Dia ( S0616c ) Or Equivalent Of Make Parryware / Hindware Including All Necessary Labor, Tools Etc. , Supply And Fixing Ofbib Cockof Make Johnson T1305c Or Equivalent Of Make Parryware / Hindwareincluding All Necessary Labor, Tools Etc. , Supply And Fixing Ofpillar Cockof Make Johnson T1301c Or Equivalent Of Make Parryware / Hindware Including All Necessary Labor, Tools Etc. , Supply And Fixing Of Angle Cockof Make Johnson T1310c1 ( Economy ) Or Equivalent Of Make Parryware / Hindwareincluding All Necessary Labor, Tools Etc. , Supply And Fixing Of2 In 1 Bib Cockof Make Johnson T1308c Or Equivalent Of Make Parryware / Hindwareincluding All Necessary Labor, Tools Etc. , Supply And Fixing Ofwall Mixer 2 In 1 With Bend Pipeof Make Johnson T1321ac ( Heavy ) Or Equivalent Of Make Parryware / Hindware Including All Necessary Labor, Tools Etc. , Supply And Fixing Ofsink Cock With Swivel Spoutof Make Johnson T1318c Or Equivalent Of Make Parryware / Hindware Including All Necessary Labor, Tools Etc. , Gi Pu Coated Wire: Supplying And Fixing Of 2Mm Gi Pu Coated Wire For Cloth Hangers On The Available Posts Gi Pu Coated Wire: Supplying And Fixing Of 2Mm Gi Pu Coated Wire For Cloth Hangers On The Available Posts , Floor Trap :Supplying And Fixing Of Heavy Duty 4 Dia 2 Way / 4 Way Pvc Multi Floor Traps Without Jali Of Reputed Make I.E. Finolex Or Equivalent , Supply And Fixing Of Waste Hose Coupling Full / Half Thread For Wash Basins And Ss Sinks Ofmake Johnson T0062c / T0061c Or Equivalent Of Make Parryware / Hindwareincluding All Necessary Labor, Tools Etc. , Supply And Fixing Ofwhite Color Ultima Single Flush Tankof Make Johnson P2827pw000kor Equivalent Of Make Parryware / Hindware Including All Necessary Labor, Tools Etc. , Supply And Fixing Of Ruby Heavy Soft Close Seat Coverof Make Johnson P0423pw0301 Or Equivalent Of Make Parryware / Hindware Including All Necessary Labor, Tools Etc. , Supply And Fixing Of Towel Ringof Make Johnson T1351c Or Equivalent Of Make Parryware / Hindware Including All Necessary Labor, Tools Etc. , Supply And Fixing Of Towel Rodof Make Johnson T1350c Or Equivalent Of Make Parryware / Hindware Including All Necessary Labor, Tools Etc. , Glass Shelf: Providing And Fixing 600X120x5 Mm Glass Shelf Of Toughened Glass With Edges Round Off, Supported On Anodized Aluminium Angle Frame With C.P. Brass Brackets And Guard Rail Complete Fixed With 40 Mm Long Screws, Rawl Plugs Etc., Complete. , Corner Stand: Supplying And Fixing Offrosted Glass Toughened Corner Stand ( Wall Mounted ) Chrome Plated Railings In Bathroom Of Minimum Size 12 Inch X 12 Inch Including All Fittings And Fixtures Etc. Complete. , Providing And Fixing Brass Gate Valve With Ci Wheel Of Approved Quality ( R Brand ) With Isi Mark ( Screw Ended ) 25Mm Nominal Bore Or Equivalent , Curtain Rods: Supplying And Installation Of Cp Curtain Rods 20 Mm Diameter With 100 Mm Long Cp Brackets ( 2 Nos. ) For Each Room Windows. , Cub Board Locks: Supplying And Fixing Of Locks With 2 Keys For Cub Boards Of Godrej Or Equivalent Make. , Supply And Fixing Bottle Traps With Outlet Pipe For Wash Basins Of Make Johnson Eco Bottle Trap With Outlet Pipe T3959c 190Mm Outlet Pipe Or Equivalent Of Make Parryware / Hindware Including All Necessary Labor, Tools Etc. , Hex Nipples: Supply And Fixing Of Gi Hexnipple Threaded Of Size 1 / 2 Inch For Plumbing Fitting As Directed By Eicetc. Complete , Door Bush: Supplying And Fixing Of Pvc Door Bush 50Mm Long With Necessary Screws And Fixtures , Door Stopper: Supplying And Fixing Of Ss Magnetic Door Stopper Wall Mounted , Aldrop 12: Providing And Fixing Stainless Steel 12 Aldrops, Size 5Mm Of Grade 304 And Of Approved Design , Aldrop 6: Providing And Fixing Stainless Steel 6 Aldrops, Size 5Mm Of Grade 304 And Of Approved Design , Tower Bolt 10: Providing And Fixing Stainless Steel Tower Bolts Of Grade 304 And Size 10 Of Approved Make , Tower Bolt 6: Providing And Fixing Stainless Steel Tower Bolts Of Grade 304 And Size 6 Of Approved Make , Insect Screens For Windows: Supplying And Fixing Of Insect Screens With Shutter Type Doors ( Aluminium With Ss Mesh ) With All Rippers, Locks, Handles Hinges Etc.With All Materials And Labors Etc. Complete Such That There Is Nogaps Between Existing Window / Ventilator Frame For Insects / Mosquitoes;For All Heights Etc., Complete. , Insect Screens For Doors: Supplying And Fixing Of Insect Screens With Shutter Type Doors ( Aluminium With Ss Mesh ) With All Rippers, Locks, Handles Hinges Etc.With All Materials And Labors Etc. Complete Such That There Is Nogaps Between Existing Window / Ventilator Frame For Insects / Mosquitoes;For All Heights Etc., Complete. , Hire Charges For Wheeled Back Hoe Loader With Backfill Blade Attachment ( Jcb ) , Hire Charges For Tractor Mounted Dozer , Hire Charges For Tractor With Trolley Of Minimum 2.5 Cum Capacity , Supply Of Gully Sucker Trucks On Hire Basis With Suction Motor / Pump And Tanker Of Minimum 6 Kl Capacity Withnecessarysuction / Delivery Hoses Of Sufficient Lengths ( Upto 50 M ) And Sufficient Personnel In Addition To A Driver And Cleaner To Handlethe Floating Oil / Other Material As Instructed By Eic. The Quoted Rate Isinclusive Of Charges Towards Fuel / Oils / Lubricants, Operator Crewscosts, Mobilization Etc. Complete. , Dismantling Of Structural Steel Works ( Bolted / Riveted / Welded ) Of All Descriptions ( Taking All Necessary Safety Precautions ) For All Heights & Depths Above & Below Plinth Level Including Supply Of All Tools & Tackles, Consumables, Necessary Scaffolding Etc. Providing Temporary Bracings As Required, Cutting Gusset Plates, Bolts, Nuts, Wildings Etc., Stacking Of Serviceable Materials At Designated Location / Cpcl Storage Yard / Scrap Yard Within The Refinery Premises As Per Direction Of Engineer-In-Charge. , Supplying, Transporting, Storing, Fabricating & Erecting In Position Bolted And / Or Welded Structural Steel Works Like Angles , Channels, Beams, Plates, Pipes, Tubes Etc.At All Heights & Levels And Locations Including All Built-Up Sections / Compound Sections Made Out Of Rolled Sections And / Or Plates / Bent Plates In Existing / New Structural Pipe Supports, Frames, Etc., Cutting To Required Size, Straightening / Bending If Required, Edge Preparation, Cleaning, Scrapping & Welding Of Unsound Joints In Existing Structural Members, Preheating, ( Including Sealing Of Box Section With Continuous Welding ) Finishing Edges By Grinding , Fixing In Line And Level With Temporary Bracings, Including Providing Staging, Scaffoldings, & Working Platforms At All Heights, And Removal Of Same After Erection, Including Preparing The Surface For Painting , Surface Cleaning, Wire Brushing, Removal Of Mill Scale, Dust, Rust, Oil Or Grease Etc. Complete Along With Providing Paint System As Follows: ( A ) Applying Inorganic Zinc Silicate Coat 50 Micron Dft ( B ) Two Coats Of Epoxy Primer Paint 50 Micron Dft Each ( C ) Two Coats Of Anti Rust Epoxy Top Coat Paint 75 Micron Dft Each As Per Manufacturers Specifications And As Directed By Engineer-In-Charge. Note:-One Coat Of Zinc Silicate And One Coat Of Epoxy Primer Shall Be Applied On Structural Steel Surfaces After Manual Cleaning Prior To Erection As Per Specifications & As Directed By Engineer-In-Charge. Supply Of All Materials In Contractors Scope. , Polishing Of Existing Mosaic Flooring Including Cost Of Labor, Materials, Tools And Tackles Etc. , Electrical Sor , Modular Box: Supply And Fixing Of Plastic / Metal Boxes Of Following Sizes With All Accessories Including Necessary Base Frame Plates / Mounting Plates Etc., Suitable For Fixing Decorative Switches Of Type Roma Or Equivalent Make Of Havells / Siemens / Anchor / L&T As Per Direction Of The Engineer-In-Charge. 1 Or 2 Module Box , 3 Module Box , 6 Module Box , 8 Module Box , 12 Module Box , Switch & Socket ( Modular Type ) : Supply, Fixing And Connection Of Modular Type Of Anchor Make ( Roma ) Or Approved Equivalent Make Switch, Socket Bell Push Etc. In Havells / Cromptons / Anchor / L&T, Complete With Labor And Materials As Per Direction Of The Engineer-In-Charge. 10 A, 1 Way Switch , 10 A, 2 Way Switch , 20 A, 1 Way Switch , 10A Bell Push Switch , Neon Indicator Red , 3 Pins Socket 10A Multi Socket , 3 Pins 10 / 20A, Heavy Duty Twin Socket , Single Module Dimmer / Fan Regulator , 3 Pins 16 Amps. Isi Marked Polycarbonate Plug Top , Pvc Battern / Angle Holder / Ceiling Rose , Ceiling Fan: Supply & Installation Of Ceiling Fan Of 1200 Mm Sweep Ceiling Fan Of Bajaj / Crompton Greaves / Khaitan / Usha / Havells Make, Including Wiring The Down Rod Of Standard Length ( Upto 30 Cm ) With 1.5 Sqmm, Pvc Insulated, Copper Conductor, Single Core Cable Etc., As Required, As Per The Specifications Of This Tender And Directions Of Engineer-In-Charge. , Exhaust Fan: The Scope Of Work Includes Supply Of Fresh Air Fan / Exhaust Fan Of Almonard / Bajaj / Crompton Greaves / Khaitan / Usha / Havells Make Of Below Mentioned Sweep And Installation In Existing Frames, Testing And Commissioning Of Fresh Air Fan / Exhaust Fan, Including Lead In Wires And Accessories As Required, All Complete With Labor And Material, With Necessary Fixing Accessories, Louvers Wherever Required, As Per The Specifications Of This Tender And Directions Of Engineer-In-Charge. Fresh Air Fan Up To 300 Mm Sweep , Socket Outlet ( 20 A ) : The Scope Of Work Includes Supply And Fixing Of 20 Amps., 240 Volts, Spn Industrial Type Or Modular Type Socket Outlet With 2 Pole And Earth, Metal Enclosed Plug Top Along With 20 Amps, G-Series, Sp, Mcb, In Enclosed Type On Surface Or In Recess, With Chained Metal Cover For The Socket Outlet, Including Connections, Testing And Commissioning Etc. As Required, All Complete With Labor And Materials, As Per The Specifications Of This Tender And Directions Of Engineer-In-Charge. Note:Isi Marked Sockets Of Approved Make Shall Be Used. , Tpn Mcb Db: Supply And Fixing Of Following Way, Havells / Legrand / Anchor / L&T Make, Pre-Wired Single Pole And Neutral Sheet Steel Mcb Consumer Unit, 240 Volts, On Surface / Recess Complete With Tinned Copper Busbar, Neutral Link, Earth Bar, Din Bar, Hinged Front Cover For The Mcb Knobs, Detachable Gland Plate, Inter Connections Including Painting, Earthing Etc. As Required ( With Ip43 Protection And Metal Door ) And As Per Direction Of Engineer-In-Charge. 8 Way , 12 Way , Mcbs: The Scope Of Work Includes Supplying And Fixing Of 5 Amps. To 32 Amps, 240 / 415 Volts, 50Hz, 10Ka Miniature Circuit Breaker ( Suitable For Motor, Lighting And Other Inductive Loads Of Following Poles In The Existing Mcb Db With Required Rails / Fasteners For Fixing, Including Connections, Testing And Commissioning Etc. As Required, All Complete With Labor And Materials, As Per Directions Of Engineer-In-Charge. Note: Isi Marked Mcbs As Per Approved Vendor Upto 32A, Single Pole , Upto 63A, 4P / Tpn , Rccb: The Scope Of Work Includes Supplying And Fixing Following Rating, Double Pole, ( Single Phase Neutral ) , 240 Volts, Residual Current Circuit Breaker ( Rccb ) , Isi Marked, Having A Sensitivity Current Indicated Miliamperes In The Existing Mcb Db With Required Rails / Fasteners For Fixing, Including Connections, Testing And Commissioning Etc. As Required, All Complete With Labor And Materials, Directions Of Engineer-In-Charge. Note: Isi Marked Rccb Shall Be Used. Upto 32 A, 30 Ma, 2P , Supply Of Pvc Conduits: The Scope Of Work Includes Supply & Laying Of Following Size Of Pvc Conduit Along With The Accessories To Be Used For Installation In Surface / Concealed As Required, As Per The Directions Of Engineer-In-Charge. Note: Only Isi Marked Conduits Shall Be Used. Upto 25 Mm , 40 Mm , Laying Of Pvc Conduits: The Scope Of Work Includes Fixing Of Following Size Of Pvc Conduit Pipes Along With The Accessories To Be Used For Installation In Surface / Concealed As Required, Including Cutting The Wall And Making Good The Same Including Plaster & Civil Works As Per The Requirement And Directions Of Engineer-In-Charge. Upto 40 Mm , Supply Of Pvc Wires: The Scope Of Work Includes Supply Of Following Size Of Pvc Insulated, Copper Conductor For Laying In The Existing Surface / Recessed, Pvc / Steel Conduit / Pvc Casing And Capping As Required, As Per The Directions Of Engineer-In-Charge. Note: Only Isi Marked Cables Shall Be Used. 1.5 Sq. Mm. , 2.5 Sq. Mm. , 4.0 Sq. Mm. , Laying Of Pvc Wires: The Scope Of Work Includes Drawing / Laying Of Following Size Of Pvc Insulated, Copper Conductor For Laying In The Existing Surface / Recessed, Pvc / Steel Conduit / Pvc Casing And Capping As Required, As Per The Directions Of Engineer-In-Charge. 1 X 1.5 Sq.Mm , 2 X 1.5 Sq.Mm , 1 X 2.5 Sq.Mm , 2 X 2.5 Sq.Mm , 2 X 4.0 Sq.Mm , Led Tube Light Fitting: The Scope Of Work Includes Supply And Fixing Of Led Tube Light Fittings Of 20 Watts, Decorative Slim Linear Led Batten Fittings With Bulb Of Havells Catalogue Or Equivalent, Including Civil Work ( If Any ) Required For Installation, All Complete With Labored Materials, As Per The Directions Of Engineer-In-Charge , Led Downlights: The Scope Of Work Includes Supply & Fixing Of Recess Mounted, Compact Vertical, Round Shaped 10W Led 6000K Downlighter With Removable Driver Of Havells Make Or Equivalent Suitable For Low Ceiling Heights, All Complete With Labor And Materials, As Per The Directions Of Engineer-In-Charge. , Water Heater / Geyser:- Supply Of Bajaj / Havells / V-Guard Or Equivalent Make Water Heater / Geyser With Following Specifications:-Type Of Geyser : Closed Storage, Capacity :15 Ltr, Wall Mounted : Vertical, Certification : Conformity To Indian Standard :Is:2082 ( Latest ) , Isi Marked : Yes, Bee Star Rating : 5 Star ( Latest ) , Generic Material Of Outer Container: Crca / Abs, Corrosion Coating : Yes, Material Of Inner Container : Copper, Warranty ( Year ) : 2 Years Or More. Geyser, Water Heater, 15 Ltrs, 230V , Earth Pit: The Scope Of Work Includes Supply , Installation , Testing And Commissioning Ofearth Pitwith 65 Mm Dia 3000 Mm Longearth Electrodes , Complete With All Necessarymaterialsincludingexcavation Of Earth Pit , Fillingwith Charcoaland Salt, Back Filling , Providing Cement ( Concrete ) Slab For Earth Pits, Paintingand Markingof Earth Pit Nosand Connectionsincluding All Labor And Materialsand As Per The Specifications Of This Tender And Directions Of Engineer-In-Charge , Supply & Installation Of 8 Swg Wire For Earthing , Supply Of Street Light Poles ( 7M ) : The Scope Of Work Includes Supply Of 7 M ( Above Ground ) Octagonal Gi Street Light Poles Of Make Bajaj Or Equivalent With Marshalling Box To Accommodate Insulated Armoured Cable With Terminals With Supply Of All Necessary Accessories And Material As Per The Direction Engineer In Charge. The Scope Of Work Also Includes Supply Of Copper Cable From Fixture To Marshalling Box. , Installation / Commissioning Of Street Light Poles: The Scope Of Work Includes Installation Of 7 Meters Street Light Poles With Marshalling Box To Accommodate 2 Nosof4 X 10 Sqmm Pvc Insulated Armoured Cable With Elmex Connectors, Earthing Of Pole / Marshalling Box & Connecting It To The Existing Earth Grid, But Excluding Lighting Fixtures, Including Suitable Foundation / Mounting Arrangement With All Labor And Material, As Per The Specifications And Drawings Attached With The Tender And Direction Engineer In Charge. If The Street Lighting Pole Is Issued As A Free Issue Item To Contractor By Cpcl, Then The Contractor Is Required To Shift The Lighting Pole Within The Cpcl Premises To The Site As Per The Direction Of Engineer-In-Charge. The Scope Of Work Also Includes Supply & Installation Of Cable From Fixture To Marshalling Box. , Supply Of 3M Light Poles: The Scope Of Work Includes Supply Of3 Meters Gi Light Poles With Supply Of All Necessary Accessories And Material As Per The Direction Engineer In Charge. The Scope Of Work Also Includes Supply Of Cable From Fixture To Marshalling Box. , Installationof 3.0 M Light Poles: The Scope Of Work Includes Installation Of 3.0 M Light Poles With 4 Way Flp / Wp Jb Including All Sundry Material As Required, Painting, Welding And All Structural Works, With All Labor And Material , As Per The Approved Drawings, Specifications Of This Tender And Directions Of Engineer In Charge. The Scope Of Work Also Includes Installation Of Cable From Fixture To Junction Box. The Scope Of Work Also Includes Shifting Of Lighting Pole Within The Cpcl Premises To The Site As Per The Direction Of Engineer-In-Charge. , Street Light Fixtures: The Scope Of Work Includes Supply, Installation And Commissioning Of Following Wattage Of Led Street Light Fitting Required To Install In The Existing Street Light Poles With Ip66 Of Bajaj Or Equivalent Including Necessary Mounting Accessories And Support Structures, As Per Requirement To Complete The Installation & Commissioning Work & Directions Of Engineer-In-Charge. 100 Watt Led Light Fixtures With Wp Ip66 Rating , 40 Watt Led Light Fixtures With Wp Ip66 Rating

BRR : 7822844 REPAIR/ MAINT OF PUMP, MOTOR, STARTER, DOZING SYSTEM, SWIMMING POOL COMPRESSOR, RAISING MAIN, GATE VALVE, PERIODICAL CLEANING OF TANKS & OTHER MISC WORKS AT AFTC, 2 DC AREA & AFS JALAHALLI EAST WEST AREA; M&L for taking down defective centrifugal pump set 100 HP capacity by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, suction pipe delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, carrying out necessary lath work, re-assembling and shifting from workshop to site, re-installation at same location as directed by Engr-in-Charge, testing on full load capacity at least for 8 hrs, complete all as specified and as directed. Note :-(a)The spares shall be measured and paid seperately in the relevent items given below.(b) Cost of labour for replacement of spares and transportation are deemed to be included in the quoted rate. (c)The pumpset shall be spared for one week for repair from the date of complaint given by AGE/ JE E/M regarding breakdown. Thecontactor is responsible for making alternate arrangement of pump set in case of time required more than one week.(d)In case services affected due to delay in repair of pump set, a penalty @ Rs 1000 per day will be levied from the contactor.(e)Please note that this penalty is exclusively other than the condition 67 of IAFW-2249 and shall be treated as interim condition of the contract.(f)The decision of the Accepting Officer in this regard shall be final and binding. 2 Supply only Ball bearing suitable for 100 HP capacity motor pump as per manufacturers design complete all as specified and as directed.Make : Tata/SKF/NBC 3 Supply only coupling Rubber Bush suitable for 100 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 4 Supply only split casing gaskets suitable for 100 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 5 Supply only shaft sleeves suitable for 100 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 6 Supply only coupling bolt with nuts suitable for 100 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 7 Supply only water seal suitable for 100 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 8 Supply only Air cock grease nipple suitable for 100 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 9 Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 100 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 10 Supply only bronze impeller suitable for 100 HPcapacity motor pump as per manufacturers design complete all as specified and as directed. 11 M&Lfor suitable size of gland packing for 100 HP pump set as per manufacturers design complete all as specified and as directed. 12 Supply & fix in replacement of 3 Pole power contactor AC 415 V 160 Amps ,AC3 ( inductive load ) type with Aux contact 2 NO + 2 NC50 Hz Model No. as per existing framesuitable for 100 HP Pump sets complete all as specified and as directed.Make : L & T / Indo Asian /Schneider 13 M & L for servicing of starter by checking and servicing the contactor coil , over load relay coiland any other parts and replacement the burnt out wiring including any modification to pump starter panel by welding,cutting , grinding ,drillingtesting the panel complete all as specified and directedfor the100 HP capacity pump setsNotes :-(i) Minor spare parts such as nuts,bolts ,washers ,indicator lamps , start,stop push button and suitable size of copper wire are deemed to be include in quoted rate. 14 Supply & fix in replacement adjustable CT/Direct operated thermal over load relay 105 to 156 A for 100 HP motor 3 phase 415v , 3 pole , with single phase protection including CTs complete all as specified and as directed.Make : L & T / Indo Asian /Schneider 15 M&L for rewinding ofsquirrel cage induction electrical motor , 3 phase, 415 volts with suitable size of copper enameled winding wire and insulating materials incl disconnecting all electrical connections ,decoupling from pump,taking down the motor from foundation , cleaning and varnishing the stator & rotor winding, heating and drying, replacement of burnt terminals, greasing to bearings, re-assembling the motor and refixing of motor on the foundation by using new nut, bolts and washers, coupling with pump,checking alignment connecting all electrical connections,checking the vibrations, RPM and testing on full load complete all as specified and directed for 100HPmotor capacity. 16 M&L for taking down defective centrifugal pump set 60 HP capacity by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, suction pipe delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, carrying out necessary lath work, re-assembling and shifting from workshop to site, re-installation at same location as directed by Engr-in-Charge, testing on full load capacity at least for 8 hrs, complete all as specified and as directed. Note :-(a)The spares shall be measured and paid seperately in the relevent items given below.(b) Cost of labour for replacement of spares and transportation are deemed to be included in the quoted rate. (c)The pumpset shall be spared for one week for repair from the date of complaint given by AGE/ JE E/M regarding breakdown. Thecontactor is responsible for making alternate arrangement of pump set in case of time required more than one week.(d)In case services affected due to delay in repair of pump set, a penalty @ Rs 1000 per day will be levied from the contactor.(e)Please note that this penalty is exclusively other than the condition 67 of IAFW-2249 and shall be treated as interim condition of the contract.(f)The decision of the Accepting Officer in this regard shall be final and binding. 17 Supply only Ball bearing suitable for 60 HP capacity motor pump as per manufacturers design complete all as specified and as directed.Make : Tata/SKF/NBC 18 Supply only coupling Rubber Bush suitable for 60 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 19 Supply only coupling bolt with nuts suitable for 60 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 20 Supply only shaft sleeves suitable for 60 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 21 Supply only split casing gaskets suitable for 60 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 22 Supply only water seal suitable for 60 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 23 Supply only Air cock grease nipple suitable for 60 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 24 Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 60 HP capacity motor pump as per manufacturers design complete all as specified and as directed. 25 Supply only bronze impeller suitable for 60 HPcapacity motor pump as per manufacturers design complete all as specified and as directed. 26 Supply and fix in replacement of mechanical flexible UT tyre rubber coupling suitable for 60 HP centrifugal pump set with cast iron flange, natural rubber coupler, mild steel clamping ring, high tensile strength Grade suitable size of Hex bolts, including aligning motor - centrifugal pump with a tolerance of +- 4mm, testing complete all as specified and directed. 27 M&Lfor suitable size of gland packing for 60 HP pump set as per manufacturers design complete all as specified and as directed. 28 M & L for servicing of starter by checking and servicing the contactor coil , over load relay coiland any other parts and replacement the burnt out wiring including any modification to pump starter panel by welding,cutting , grinding ,drillingtesting the panel complete all as specified and directedfor the60 HP capacity pump setsNotes :-(i) Minor spare parts such as nuts,bolts ,washers ,indicator lamps , start,stop push button and suitable size of copper wire are deemed to be included in quoted rate. 29 Supply & fix in replacement of 3 Pole power contactor AC 415 V AC3 ( inductive load ) type 100 Amps, AC3 type 2 NO + 2 NC50 Hz Model No. as per existing frame suitable for 60 HP Pump sets complete all as specified and as directed.Make : L & T / Indo Asian /Schneider 30 Supply & fix in replacement adjustable CT/Direct operated thermal over load relay75 to 110 A for 60 HP motor 3 phase 415v , 3 pole , with single phase protection including CTs complete all as specified and as directed.Make : L & T / Indo Asian /Schneider 31 Supply & fix in replacementSingle phase preventer for motor in the existing panel board with new one at water supply installations complete all as specified and as directed. 32 Supply & fix in replacement Star Delta timer 0-30/60 sec complete all as specified and as directed. 33 M&L for rewinding ofsquirrel cage induction electrical motor , 3 phase, 415 volts with suitable size of copper enameled winding wire and insulating materials incl disconnecting all electrical connections ,decoupling from pump,taking down the motor from foundation , cleaning and varnishing the stator & rotor winding, heating and drying, replacement of burnt terminals, greasing to bearings, re-assembling the motor and refixing of motor on the foundation by using new nut, bolts and washers, coupling with pump,checking alignment connecting all electrical connections,checking the vibrations, RPM and testing on full load complete all as specified and directed for 60 HPmotor capacity. 34 Taking down defective centrifugal pump set 25 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, suction pipe delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, carrying out necessary lathe work, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on full load capacity at least for 8 hrs, complete all as specified and as directed. Note :- (a)The spares shall be measured and paid seperately in the relevent items given below.(b) Cost of labour for replacement of spares and transportation are deemed to be incl in the quoted rate. (c)The pumpset shall be spared for one week for repair from the date of complaint given by AGE/ JE E/M regarding breakdown. Thecontactor is responsible for making alternate arrangement of pump set in case of time required more than one week.(d)In case services affected due to delay in repair of pump set, a penalty @ Rs 500 per day will be levied from the contactor.(e)Please note that this penalty is exclusively other then the condition 67 of IAFW-2249 and shall be treated as interim condition of the contract.(f)The decision of the Accepting Officer in this regard shall be final and binding. 35 Supply only Ball bearing suitable for 25 HP motor pump as per manufacturers design complete all as specified and as directed.Make : Tata/SKF/NBC 36 Supply only split casing gaskets suitable for 25 HP motor pump as per manufacturers design complete all as specified and as directed. 37 Supply only Air cock grease nipple suitable for 25 HP motor pump as per manufacturers design complete all as specified and as directed. 38 Supply only water seal suitable for 25 HP motor pump as per manufacturers design complete all as specified and as directed. 39 Supply only coupling bolt with nuts suitable for 25 HP motor pump as per manufacturers design complete all as specified and as directed. 40 Supply only coupling Rubber Bush suitable for 25HP motor pump as per manufacturers design complete all as specified and as directed. 41 Supply only shaft sleeves suitable for 25 HP motor pump as per manufacturers design complete all as specified and as directed. 42 Supply only bronze impeller suitable for 25 HP motor pump as per manufacturers design complete all as specified and as directed. 43 Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 25 HP motor pump as per manufacturers design complete all as specified and as directed. 44 M&Lfor suitable size of gland packing for 25 HP pump set as per manufacturers design complete all as specified and as directed. 45 Supply & fix in replacement adjustable CT/Direct operated thermal over load relay30 to 43 A for 25 HP motor 3 phase 415v , 3 pole , with single phase protection including CTs complete all as specified and as directed.Make : L & T / Indo Asian /Schneider 46 Supply & fix in replacement of3 Pole power contactor AC 415 V AC3 ( inductive load ) type 40 Amps with add on aux contact 2 NO + 2 NC50 Hz Model No. as per existing framesuitable for 25 HP Pump set complete all as specified and as directed.Make : L & T / Indo Asian /Schneider 47 M & L for servicing of starter by checking and servicing the contactor coil , over load relay coiland any other parts and replacement the burnt out wiring including any modification to pump starter panel by welding,cutting , grinding ,drillingtesting the panel complete all as specified and directedthe25 HP capacity pump setsNotes :-(i) Minor spare parts such as nuts,bolts ,washers ,indicator lamps , start,stop push button and suitable size of copper wire are deemed to be included in quoted rate. 48 M&L for rewinding ofsquirrel cage induction electrical motor , 3 phase, 415 volts with suitable size of copper enameled winding wire and insulating materials incl disconnecting all electrical connections ,decoupling from pump,taking down the motor from foundation , cleaning and varnishing the stator & rotor winding, heating and drying, replacement of burnt terminals, greasing to bearings, re-assembling the motor and refixing of motor on the foundation by using new nut, bolts and washers, coupling with pump,checking alignment connecting all electrical connections,checking the vibrations, RPM and testing on full load complete all as specified and directed for 25 HPmotor capacity. 49 Supply and fixing in repair of3 phase star delta pump starter suitable for 25 HP centrifugal pump with over load relay of suitable current rating,timer relay ,single phase preventor fixing in existing enclosure including all connected accessories complete all as specified and directed Make : L&T/Indoasian/Schenider/Havells 50 Supply and fix as in repair 4 Pole MCCB ,415 volts,fixed type ,160 Amp, 50 Hz, with rupturing capacity 25 KA in theexisting pump starter panel including connecting up incoming/out going cables with suitable lugs and testing complete all as specified and as directed. Make: Indoasian/L&T/ Legrand 51 Taking down and relaying of existingDI water pipe lines of size 300 mm bore but of any type including all fittings after removal of scaling, cleaning and flushing etc complete all as specified and directed.Note:Excavation & earthwork shall be measured & paid seperately 52 Taking down and relaying of existingDI water pipe lines of size 200 mm bore but of any type includings all fittings after removal of scaling, cleaning and flushing etc complete all as specified and directed.Note:Excavation & earthwork shall be measured & paid seperately 53 M&L as in replacement for Ductile Iron Pipe (DI Pipes), ISI marked, Class K-7, 300 mm dia laid in trenches including jointing material such as EPDM Rubber Gasket and suitable type of grease etc complete all as specified and directed.Note :- DI fitting/special shall be measured and paid separately.Note:Excavation & earthwork shall be measured & paid seperately 54 Supply and fixing in replacement Sluice valve of size 300 mm dia Cl body, both ends flanged duly drilled, ISI marked with IS-14846-2000, PN-1.6 having Stainless Steel spindle and check nut including operating wheel, fixing with new nuts, bolts, washers and rubber insertion/packing complete all specified and directed 55 Material and Labour for dismantling the brassspindle from 300 mm dia bore sluice valves in various locations and reconditioning the sluice valve by replacing SS/bronze spindle, spindle nuts with brass ring, gland nuts complete all as specified and as directed. 56 Material and Labour for gland packing in leaking Sluice Valves of 300 mm dia size Complete including replacing/tightening the existing bolts and nuts etc. complete all as directed . 57 Cutting the existing broken / cracked CI/DI/GI/Asbestos Cement Pipe line of size upto 300mm dia, by dewatering the leakage water from site and removing the old pipe line and addition / alteration to pipe by providing new pipe,welding,bending,grinding,including all accessories such as tee,elbow,collar etc , and ensure no leakage with pressure test complete all as specified and directed , Note : Pipes and mechanical collar shall be measured and paid seperately 58 M&L for specials fittings suitable for Cast iron / ductile iron /Asbestos cement pipe made out of MS Plate of 12 mm thick complete with mechanical/detachable type arrangement as per site requirementwith MS bolts and nuts of suitable size and MS sheet fabricated to required dia of pipe for prepration of collar/flange, on any pipe leak or cracks of pipe for arresting the leakage complete including rubber ring, packing rubber sheet,set of two collar rings of size 300 mm borecomplete all as specified and as directed. 59 M&L as in replacement for Ductile Iron Pipe (DI Pipes), ISI marked, Class K-7, 200 mm dia laid in trenches including jointing material such as EPDM Rubber Gasket and suitable type of grease etc complete all as specified and directed.Note :- (i)DI fitting/special shall be measured and paid separately. (ii)Excavation & earthwork shall be measured & paid seperately 60 S&F in replacementfoot valve (confirming to IS-4038) cast iron of size 200 mm bore including rubber insertion, packing material, nuts, bolts, and washer with suitable new one all as specified and directed. 61 Supply and fixing in replacement Non return valve (confirming to IS-5312) (NRV) of size 200 mm ISI marked, CIbody suitable for 200 mm dia pipe line complete all specified and directed 62 Supply and fix replacement of U/S leather packing suitable for foot valve 150 to 200 mm dia, suction pipe flanged connected to pumpsets including replacement ofnuts and bolts etc all as specified and directed 63 Supply and fixing in replacement Sluice valve of size 200 mm dia Cl body, both ends flanged duly drilled, ISI marked with IS-14846-2000, PN-1.6 having Stainless Steel spindle and check nut including operating wheel, fixing with new nuts, bolts, washers and rubber insertion/packing complete all specified and directed 64 Material and Labour for dismantling the brassspindle from 200 mm dia bore sluice valves in various locations and reconditioning the sluice valve by replacing SS/bronze spindle, spindle nuts with brass ring, gland nuts complete all as specified and as directed. 65 Material and Labour for gland packing in leaking Sluice Valves of 200 mm dia size Complete including replacing/tightening the existing bolts and nuts etc. complete all as directed . 66 Material & Labour as in repair for Construction ofValve pit having inner dimensions 1200 mm x 1200 mm x 1200 mm with foundation PCC 1:4:8 type D2 using 40mm grade stone aggregate, brick work with sub class B old size bricks built in Cement mortar 1:6, PCC 1:2:4 type B1 using 20mm stone aggregate for Coping, 15 mm thick rendering plaster in CM 1:4 inluding MS cover with locking arrangement all as specified and as directed.Note :- MS work as in chamber cover shall be measured and paid separately under relevant item of this schedule. 67 Cutting the existing broken / cracked CI/DI/GI/Asbestos Cement Pipe line of size upto 200mm dia, by dewatering the lekage water from site and removing the old pipe line and addition / alteration to pipe by providing new pipe,welding,bending,grinding,including all accessories such as tee,elbow,collar etc , and ensure no leakage with pressure test complete all as specified and as directed. Note : Pipes and mechanical collar shall be measured and paid seperately 68 M&L for specials fittings suitable for Cast iron / ductile iron /Asbestos cement pipe made out of MS Plate of 12 mm thick complete with mechanical/detachable type arrangement as per site requirementwith MS bolts and nuts of suitable size and MS sheet fabricated to required dia of pipe for prepration of collar/flange, on any pipe leak or cracks of pipe for arresting the leakage complete including rubber ring, packing rubber sheet,set of two collar rings of size 200 mm borecomplete all as specified and as directed. 69 Clearing the bushes trunk girth not exceeding 10 .00 cm and area around valve chambers upto 1.0 mtrs and depositing at a distance not exceeding 50 mtrs from starting point complete all as specified and directed 70 Demolition of Brickwork or precast concrete block walling including wall quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and concrete articles built in cement mortar complete all as specified or directed. 71 M&L for Pre-cast cement concrete block masonry in PCC (1:3:6) type C-1 using 20mm grade stone aggregate with solid blocks, exc.10 cm in width and setting in cement mortor 1 : 4, complete, in walls all as specified and directed. 72 Over hauling and repair to Chemical Dosing Pump Granual based chloronome plants at Range pump houseby cleaning the FRP 150 Ltrs Tank, and cleaning of filters and NRV , checking and cleaning the delivery pipe line for chocking , cleaning of chlorination plant and maintainig properly including checking the level of oil in the gauge and topping up as and when required, checking the glands and maintain the plant in all respect and replacement of minor spare for smooth functioning of Chlorination Plant all as directed by Engineer in charge. Note:- The unit rate quoted shall be deemed to include for the cost of replacement of minor spares such as O rings , nut/screws,washers,bolt, cleaning waste , toolsfor routine day to day maintenance and necessary servicing to keep the plants in running condition on all days includingSunday and holidays, Replacement of other major spares shall be measured and paid for separately under respective item of BOQ 73 All as per item No 72 but at E & ITI OH Tank complete all as specified and directed. 74 All as per item No 72 but at Double Tank complete all as specified and directed. 75 All as per item No 72 but at ETI OH Tank complete all as specified and directed. 76 Supply onlyO-tolodine chlorine solution in packing of 200ml bottle for testing of chlorine content in water 77 Supply onlyChlorine dosing pistonpump unit complete 78 Supply only Rubber ring for mixing chamber 79 Supply onlyPVC NRV set with glass ball for suction and delivery adopter 20 mm dia 80 Supply onlyTeflon gland square type 3 mm for smooth functioning of Chlorination plant 81 Supply only PVCdiaphram valve 25 mm dia heavy duty 82 Supply only Agitator mixing assembly with motor 83 Supply only Chlorine test kit with coloured sample Complete with all testing fitments and OT - solution in Rexene finished box Complete all as specified and as directed 84 Supply of calcium based high strength chlorination chemical for water in granular form chlorine concentration level having 65%-70% chlorine content packed in 45 Kg capacity in factory sealed HDPE Container superior quality suitable for treatment of drinking water complete all as specified and directed.Note:The material shall be delivered at watersupply installation as per direction of AGE E/M as & when required during the contract period. 85 Material and labourfor Attending day to day water supply service related complaintslike choking of rising main pipes of buildings, blockage in control valves/ float valves/ pipe fittings, etc, applying necessaryengineering efforts like dismantle of pipes and fittings to clean and remove blocking objects, descaling of pipes, re-fixing of pipes on wall, etc to restore the proper flow of water to service tanks all as specified and directed. 86 Note :- (a) The contractor has to attend above mentioned job in any location of AFTC, 2 DC and entire AFS jalahalli East and West area 87 (b)The service tanks are positioned on roof top of multi storied buildings upto three storey. Contractor is responsible to ensure that the labour employed should be equipped with safety items like industrial helmet, safety belt, extensible ladder of 40 feet length, plumbing and cuttings tools, etc. 88 (c) The cost of rethreading of GI pipes of 25mm dia and adding of new GI nipple of suitable length after rethreading is deemed to be included in the quoted rate. 89 (d) Due to shortage of water in the station, the repair work and testing required under this item need to be carried out during water supply distribution hours i.e. 5:30 AM to 7:30 AM. Nothing extra shall be permitted in this regard. 90 (e) The cost of repair to the damages of cemented surfaces/ external finishes/ metal clamps of rising pipes are also deemed to be included in the quoted rate. 91 (f)In case of any delay in attending the complaint more than 6 hrs after handing over routine/urgent complaints, the contractor shall be liable to pay the penalty as described in penalty clause given here as under. 92 (g)If the delay is more then 06 hrs period and the GE is not satisfied with the reason for delay then penalty at the rate of Rs 100/- per job shall be deducted from the dues of the contractor. Please note that this penalty is exclusively other then the condition 67 of IAFW - 2249 and shall be treated as interim condition of the contract and shall be enforce above as and when delay in individual job is noticed and no claim whatsoever on this account shall be entertained by the Deptt. 93 (h) The decision of the Accepting Officer in this regard shall be final and binding. 94 Supply and fix Nipple suitable for HDPE water tankof size 20 mm complete all as specified and as directed. 95 Supply and fix Nipple suitable for HDPE water tankof size 25 mm complete all as specified and as directed. 96 Supply and fix in repairs lids for polyethylene water storage tanks, threaded or hinged type as per existing incl PTMT nuts/binding wire suitable up to 1000Ltrs cap of tanks complete all as specified and directed by Engineer-in Charge 97 Supply and fix in replacement PVC Ball valve ISI marked high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 20 mm complete all as specified and directed 98 Supply and fix of PVC water tank 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I ,complete all as directed incl disconnecting existing tank of any description and any capacity complete. 99 Supply and fixingin repair 25 mm dia Unplasticiced PVC Pipes of pressure rating 10kgf/cm2including fittings like socket / union / Tee / Reducer / Nipple etc complete fixed to wall/ceilings/ in floors etc, complete all as specified and directed. 100 Supply and fixing in repair20 mm dia Unplasticiced PVC Pipes of pressure rating 10kgf/cm2including fittings like socket / union / Tee / Reducer / Nipple etc complete fixed to wall/ceilings/ in floors etc, complete all as specified and directed. 101 Supply and fixingin repair UPVC Gate Valve of size 25 mm dia , ISI marked complete all as specified and as directed. 102 Supply and fixingin repair UPVC Gate Valve of size 20 mm dia, ISI marked complete all as specified and as directed. 103 Supply and fixingin repair 20 mm dia Chlorinated PVC (CPVC) Pipes of pressure rating 10kgf/cm2including fittings like socket / union / Tee / Reducer / Nipple etc complete fixed to wall/ceilings/ in floors etc, complete all as specified and directed. 104 Supply and fixingin repair 25 mm dia Chlorinated PVC (CPVC) Pipes of pressure rating 10kgf/cm2including fittings like socket / union / Tee / Reducer / Nipple etc complete fixed to wall/ceilings/ in floors etc, complete all as specified and directed. 105 Supply and fixingin repair Chlorinated PVC Gate Valve of size 20 mm dia, ISI marked complete all as specified and as directed. 106 Supply and fixingin repair Chlorinated PVC Gate Valve of size 25 mm dia, ISI marked complete all as specified and as directed. 107 Supply and fix in repairs lids for polyethylene water storage tanks, threaded or hinged type as per existing incl PTMT nuts/binding wire suitable for1001 to 5000 Ltrs cap of tanks complete all as specified and directed by Engineer-in Charge 108 Supply and fix in replacement PVC Ball valve ISI marked high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 25 mm complete all as specified and directed 109 Supply and fix of PVC water tank 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I ,complete all as directed incl disconnecting existing tank of any description and any capacity complete. 110 Taking down and relaying of existingserviceable GI tubing / connection in new or old positions including cleaning, cutting, threding all as directed, along with new GI fittings where ever replaced and required at site of size 40 to 50 mm bore complete all as specified directed. Note:Excavation & earthwork shall be measured & paid seperately 111 Taking down and relaying of existing serviceable GI tubing / connection in new or old positions including cleaning, cutting, threding all as directed, along with new GI fittings where ever replaced and required at site of size 25 mm bore complete all as specified directed. Note:Excavation & earthwork shall be measured & paid seperately 112 Taking down and relaying of existingserviceable GI tubing / connection in new or old positions including cleaning, cutting, threding all as directed, along with new GI fittings where ever replaced and required at site of size 20 mm bore complete all as specified directed. Note:Excavation & earthwork shall be measured & paid seperately 113 Taking down and relaying of existingserviceable GI tubing / connection in new or old positions including cleaning, cutting, threading all as directed, along with new GI fittings where ever replaced and required at site of site of size 15 mm borecomplete all as specified directed. 114 Supply & Fix as in replacement of GI tubing medium grade of size 50 mm bore with all fittings on wall/ trenches complete including cutting and thereading all as required at site complete all as specified directed.Note:Excavation & earthwork shall be measured & paid seperately 115 S&F in replacement Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 50mm complete all as specified and directed. 116 Supply & Fix as in replacement of GI tubing medium grade of size 40 mm bore with all fittings on wall/ trenches complete including cutting and thereading all as required at site complete all as specified directed.Note:Excavation & earthwork shall be measured & paid seperately 117 S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm complete all as specified and directed. 118 Supply & Fix as in replacement of GI tubing medium grade of size 25 mm bore with all fittings on wall/ trenches complete including cutting and thereading all as required at site complete all as specified directed. Note:Excavation & earthwork shall be measured & paid seperately 119 S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm complete all as specified and directed. 120 Supply & Fix as in replacement of GI tubing medium grade of size 20 mm bore with all fittings on wall/ trenches complete including cutting and thereading all as required at site complete all as specified directed. Note:Excavation & earthwork shall be measured & paid seperately 121 S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm complete all as specified and directed. 122 Supply & Fix as in replacement of GI tubing medium grade of size 15 mm bore with all fittings on wall/ trenches complete including cutting and thereading all as required at site complete all as specified directed. Note:Excavation & earthwork shall be measured & paid seperately 123 S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of size 15 mm complete all as specified and directed. 124 S & F in replacement Bib taps, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe fixed of size 15 mmfor brass ferrule fancy type and fixed complete all as specified and directed. 125 Supply and fix Nipple suitable for HDPE water tankof size 40 mm complete all as specified and as directed. 126 Supply and fix in replacement PVC Ball valve ISI marked high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 40mm complete all as specified and directed 127 Supply and fix PVC water tank 2000 Ltrs Capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as directed incl disconnecting existing tank of any description and capacity complete. 128 Supply and fixingFramed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, hinges and handles etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 for valve pit chamber, raising main support and motor foundation supports etc.complete all specified and directed. 129 M & L for Over hauling and repair/replacement of unserviceable items ofPortable RO unit of capacity 80 LPD by disconnecting all pipe lines, filters catridges, RO Membrane , motor, float valveand water storage tank,all filter catridges(Pre Activated carbon ,Post Activated carbon, inline sedimant , pre particle filter), motor carbon brushes, pressure pump diaphram, float valve,solenoid valve,12/24v SMPS power supply unit , damaged piles lines , bends ,tee , elbow, water flow restrictor including cleaning of water storage tanks and testing (TDS ), fixing of pre filtersall respect and replacement of minor spare such as carbon brush ,tee ,elbow,pipe line,teflon tape,screws,nuts etc include in this quoted rate for smooth functioning of RO Plant complete all as specified and as directed.Note : Major spare parts shall be measured and paid seperately as supply only under relevant items of BOQ. 130 Supply only Reverse Osmosis membrane with clamps suitable for RO unit all as specified 131 Supply only Inline sediment filter with clamps suitable for RO unit all as specified 132 Supply only pre particle filter with food grade housing arrangement and with clamps suitable for RO unit all as specified 133 Supply only pre-activated carbon filter with clamps suitable for RO unit all as specified 134 Supply only Pressure pump 12/24vsuitable for RO unit all as specified 135 Supply only float switch suitable for RO unit all as specified 136 Supply only Post-activated carbon filter with clamps suitable for RO unit all as specified 137 Supply only RO pressure Pump Diaphram Head unitsuitable for RO unit all as specified 138 Supply only TDS,PH,Chlorine mesauring digital device all as specified 139 Supply only solenoid 12/24vsuitable for RO unit all as specified 140 Supply only 12/24v SMPS suitable for RO unit all as specified 141 Supply and fixing as in repair pre filter housingelementwithsuitable size of filter to protect RO includingPVC pipe of required length and all connected items complete all as specified and directed. 142 Supply, install, testing and commissioning ofChemical Dosing system havingtop dia 540mm x bottom dia 480mm x height 575 mm, net capacity 95 - 100 Ltr consisting of (i) water inlet line (ii) Dosing pump inlet arrangement (iii) Drain (iv) Overflow (v) Level Gauge (vi) inspection port (vii) Agitator 120 watt 800 - 900 RPM Single Phase flange mounted motor with plastic shaft and impeller (ix) provision of mounting Pump on Lid/wall along with dosing Injector of the following specification. Adjustble dosing pump max pressure 5kg/cm square& max flow rate 0 - 50 ltr / hr including all accessories such asLead tubing, Connecting Ferrules, check valves, non return valve all as directed. Power input 230V, 50 Hz, 40 SPM 1/30 fractional Horsepower, etc complete all as specified and directed. Make: - Model No. VST 1011 of Ravi Enterprise or equivalent as per E-in-Cs approved make.Note: Unit quoted rate shall be inclusive of taking down of old unserviceableplant and depositing same to MES store yard . 143 M&L for dewateringof Swimming Pool of size 50m x 25m (Olympic size pool ),Cleaning of Swimming pool bed,vertical walls complete with high pressure water jet to remove all masses, algae and dirt and removal of dirty waterwith sludge using non clog sludge machine and disposal of the same to a safe distance & applying of anti bacterial sterlization spray to walls, floors and applying muriatic acid, caustic soda or any other cleaning agent without damaging the existing tiles. Finally washing total surfaces with fresh water and make ready for fill up and ceilings all as directed.Note: (a) The Rate quoted by the contactor is deemed to include labours,tools and acessories andprovision of stickering of date of cleaning on the existing boardletter / figures White or Black colour and size as per existing font. (Date of Cleaned in format of (DD/MM/YY) Note : chemicals used for cleaning/PH level stablizer/anti Baterial/anti algae controller shall be supplied under relevant items 144 All as per Sl Item No. 143 here-in-before but Diving Pool of size 20 x 20 Meter complete all as specified and as directed. 145 All as per Sl Item No. 143 here-in-before but Balancing Tank of capacity 1,00,000 Gallon complete all as specified and as directed. 146 Supply only swimming pool grade Copper Sulphate crystal of superior qualityincluding stocking/ Handling and shifting complete all as specified and directed. 147 Supply only Swimming pool grade Hydro Chloric Acid (HCL) for regulating PH value of the pool complete all as specified and as directed. 148 Supplyonly swimming pool grade calcium based(Sodium Hypochloride) for water disinfectant as liquid form insealedcontainerhaving, chlorine concentration level not less than 12% and adding/mixing complete all as specified and as directed. 149 Supply only non ferrous Alum powder/crystal free from impurityclass Isuitable for swimming pools and adding/mixing as per direction of Engr-in-Charge to maintain water qualityincluding stocking/ Handling and shifting complete all as specified and directed. 150 Supply only Soda ash free from impurityclass Isuitable for swimming pools and adding/mixing as per direction of Engr-in-Charge to maintain water qualityincluding stocking/ Handling and shifting complete all as specified and directed. 151 Supply only Algae control gel/liquidfree from impurityclass Isuitable for swimming pools and adding/mixing as per direction of Engr-in-Charge to maintain water qualityincluding stocking/ Handling and shifting complete all as specified and directed. 152 Supply only chemically non reactive/lab quality Plastic mug 1 ltrs capacity complete all as specified and as directed. 153 Supply and fix in replacement ofchemically non reactive/Lab qualityPlastic bucket 35 ltrs capacity complete all as specified and as directed. 154 Supply and fix in replacement of nylon brush (soft quality) with wooden/HDPEbase of size 3 feet long, 2.5 (Inch) wide localy available best quality, suitable for fix with suction sweeper.complete all as specified and as directed. 155 Supply and fix in replacement ofnylon brushwithHDPEbase of size >18 Inch wide and handle > 20 feet long wide localy available best quality for cleaning walls of swimming pool complete all as specified and as directed. 156 Supply and fix in replacement offlexible pipe from suction sweeper pumps and Supply & fix PVC flexble hose pipe50mm OD including necessary jubilee clamps complete all as specified and as directed. 157 Supply and fix in replacement of nylon rope 25mm dia for suctionsweeper ( as per sample) complete all as specified and as directed. 158 Material and labour for opening the pressure filter vessel located in swimming pool of dia 2.8 Meter and height 2.6 meter for the following works:-(a)Opening the man hole cover and taking out entire filter media ie, existing stone aggregate , sand, quartz , slugde, algae etc(b)Cleaning of entire surfaces of sides , top and bottom of vessel by applying hydrochloric acidand thorough rinsing and make the vessel fit for re-filling the filter media.(c)Applying one coat of approved anti corrosive paint to entire internal surfaces of pressure filter including preparation of surfaces.(d) Re-fill the filter media with approved material of stone aggregate, river sand and white quartz in layers and properly packed upto existing level.All the material shall be rinsed thoroughly by using hydochloric solution and maintain the PH value at the range of 3 to 5.(e)Applying two coat of synthetic enamel paint to external surface of pressure filter vessel including preparation of surface etc and all as directed. 159 M&L for carrying out repair to trolley of suction sweeper pump set, including removing the pump and motor assembly carefully, dismantling rusted, bent or damaged MS frame members, cleaning entire surface, cutting and replacing corroded angle/channel sections with new mild steel of suitable size, welding, grinding and aligning to restore structural integrity. Work includes replacement of defective or jammed trolley wheels with new heavy-duty rubber/PU wheels of suitable load capacity, including fabrication of axle if required, welding, fitting and alignment. Entire metal frame surface shall be cleaned of rust and old paint using wire brush/scraper, then applied with one coat of red oxide primer and two coats of synthetic enamel paint of approved shade. Pump and motor set shall be re-mounted securely on trolley after repairs, reconnecting all mounting hardware as directed by Engineer-in-Charge, complete all as specified and directed. 160 M&L for carrying out repairs to 900mm wide suction sweeper head including dismantling the existing head assembly, cleaning and removing rust, replacing damaged or worn-out wheels with new nylon/plastic rollers of suitable size, fabricating and welding broken or bent brackets, repairing or replacing the metal body plate with mild steel sheet of suitable gauge, grinding sharp edges, tightening or replacing fasteners, restoring proper alignment of brush head and roller arms. Work includes thoroughly cleaning the base frame and applying one coat of red oxide primer and two coats of synthetic enamel paint for corrosion protection. The nylon bristle brush shall be checked for wear and refixed/replaced if found loose or damaged, ensuring smooth and uniform contact during sweeping operation. Complete all as specified and as directed by the Engineer-in-Charge 161 M&L for rewinding of 3-phase squirrel cage induction motor of capacity up to 3 HP, including removing the motor from its base, opening the end covers, dismantling the rotor, cleaning the stator core, removing burnt winding, preparing slots, rewinding the stator coils with super enamelled copper wire of same gauge and turns as per manufacturers specification, insulating with Class F insulation material, inserting wedges, varnishing with high-grade insulating varnish, oven drying, reassembling all components, aligning bearings, replacing terminal leads, testing for insulation resistance and load performance. Work includes cost of copper wire, insulating materials, varnish, labour, and testing equipment. Motor shall be tested under full load conditions for a minimum of 2 hours to ensure proper functioning. Complete all as specified and directed by the Engineer-in-Charge 162 M&L for carrying out repair to 3-phase DOL (Direct-On-Line) starter up to 5 HP capacity, including opening of enclosure, cleaning of all internal components, checking and tightening of loose terminals, replacing defective parts such as contactor coil, contacts, NO/NC auxiliary blocks, push buttons, overload relay, or indicator lamps with suitable rated spares as per original design, servicing of moving parts, reassembly, insulation testing, and functional testing under load conditions. The job includes cost of consumables like contact cleaner, terminal tags, and minor hardware. All replaced parts shall be measured and paid separately under relevant items. Complete all as specified and as directed by the Engineer-in-Charge 163 Taking down defective centrifugal/Monoblock pump set 10 HP to 15 HPby disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, suction pipe delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, carrying out necessary lathe work, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on full load capacity at least for 8 hrs, complete all as specified and as directed. Note :- (a)The spares shall be measured and paid seperately in the relevent items given below.(b) Cost of labour for replacement of spares and transportation are deemed to be incl in the quoted rate. (c)The pumpset shall be spared for one week for repair from the date of complaint given by AGE/ JE E/M regarding breakdown. Thecontactor is responsible for making alternate arrangement of pump set in case of time required more than one week.(d)In case services affected due to delay in repair of pump set, a penalty of Rs 500 per day will be levied from the contactor.(e)Please note that this penalty is exclusively other then the condition 67 of IAFW-2249 and shall be treated as interim condition of the contract.(f)The decision of the Accepting Officer in this regard shall be final and binding. 164 Supply only Ball bearing suitable for 10 HP to 15 HPmotor pump as per manufacturers design complete all as specified and as directed.Make : Tata/SKF/NBC 165 Supply only coupling bolt with nuts suitable for 10 HP to 15 HPmotor pump as per manufacturers design complete all as specified and as directed. 166 Supply only coupling Rubber Bush suitable for 10 HP to 15 HP motor pump as per manufacturers design complete all as specified and as directed. 167 Supply only split casing gaskets suitable for 10 HP to 15 HP motor pump as per manufacturers design complete all as specified and as directed. 168 Supply only Air cock grease nipple suitable for 10 HP to 15 HP motor pump as per manufacturers design complete all as specified and as directed. 169 Supply only shaft sleeves suitable for 10 HP to 15 HP motor pump as per manufacturers design complete all as specified and as directed. 170 Supply only water seal suitable for 10 HP to 15 HP motor pump as per manufacturers design complete all as specified and as directed. 171 Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for 10 HP to15 HP motor pump as per manufacturers design complete all as specified and as directed. 172 Supply only bronze impeller suitable for 10 HP to 15 HP motor pump as per manufacturers design complete all as specified and as directed. 173 M&Lfor suitable size of gland packing for 10 HPto 15 HP pump set as per manufacturers design complete all as specified and as directed. 174 Supply & fix in replacement adjustable CT/Direct operated thermal over load relay15 to 21 A for 10 HP to 15 HP motor3 phase 415v , 3 pole , with single phase protection including CTs complete all as specified and as directed. Make : L & T / Indo Asian /Schneider 175 M & L for servicing of starter by checking and servicing the contactor coil , over load relay coiland any other parts and replacement the burnt out wiring including any modification to pump starter panel by welding,cutting , grinding ,drillingtesting the panel complete all as specified and directedfor the10 HP to 15 HP capacity pump setsNotes :-(i) Minor spare parts such as nuts,bolts ,washers ,indicator lamps , start,stop push button and suitable size of copper wire are deemed to be included in quoted rate. 176 Supply & fix in replacement of3 Pole power contactor AC 415 V AC3 ( inductive load ) type 25 Amps with add on aux contact 2 NO + 2 NC50 Hz Model No. as per existing framesuitable for 10 HP to 15 HP Pump sets complete all as specified and as directed.Make : L & T / Indo Asian /Schneider 177 M&L for rewinding ofinduction electrical motor , 3 phase, 415 volts with suitable size of copper enameled winding wire and insulating materials incl disconnecting all electrical connections ,decoupling from pump,taking down the motor from foundation , cleaning and varnishing the stator & rotor winding, heating and drying, replacement of burnt terminals, greasing to bearings, re-assembling the motor and refixing of motor on the foundation by using new nut, bolts and washers, coupling with pump,checking alignment connecting all electrical connections,checking the vibrations, RPM and testing on full load complete all as specified and directed for 10 HP to 15 HPmotor capacity. 178 Taking down defective centrifugal /Monoblock pump set upto 5 HP by disconnecting the pump from motor after unscrewing nuts/ bolts of coupling, foundation, suction pipe delivery pipes and shifting of pump to workshop for repair/ servicing, comprising strip opening of pump, replacement of any defective parts, carrying out necessary lathe work, re-assembling and shifting from workshop to site, re-installation at location as directed by Engr-in-Charge, testing on full load capacity at least for 8 hrs, complete all as specified and as directed. Note :- (a)The spares shall be measured and paid seperately in the relevent items given below.(b) Cost of labour for replacement of spares and transportation are deemed to be incl in the quoted rate. (c)The pumpset shall be spared for one week for repair from the date of complaint given by AGE/ JE E/M regarding breakdown. Thecontactor is responsible for making alternate arrangement of pump set in case of time required more than one week.(d)In case services affected due to delay in repair of pump set, a penalty of Rs 500 per day will be levied from the contactor.(e)Please note that this penalty is exclusively other then the condition 67 of IAFW-2249 and shall be treated as interim condition of the contract.(f)The decision of the Accepting Officer in this regard shall be final and binding. 179 Supply only coupling bolt with nuts suitable for upto 5 HPmotor pump as per manufacturers design complete all as specified and as directed. 180 Supply only Ball bearing suitable for upto 5 HP motor pump as per manufacturers design complete all as specified and as directed.Make : Tata/SKF/NBC 181 Supply only split casing gaskets suitable for upto 5 HPmotor pump as per manufacturers design complete all as specified and as directed. 182 Supply only coupling Rubber Bush suitable for upto 5 HPmotor pump as per manufacturers design complete all as specified and as directed. 183 Supply only Air cock grease nipple suitable for upto 5 HPmotor pump as per manufacturers design complete all as specified and as directed. 184 Supply only shaft sleeves suitable for upto 5 HPmotor pump as per manufacturers design complete all as specified and as directed. 185 Supply only water seal suitable for upto 5 HPmotor pump as per manufacturers design complete all as specified and as directed. 186 Remetaling of shaft, turning, grinding as per the required size and polishing including provision of neck rings of impellers suitable for upto 5 HP motor pump as per manufacturers design complete all as specified and as directed. 187 Supply only bronze impeller suitable for upto 5 HPmotor pump as per manufacturers design complete all as specified and as directed. 188 Supply and fix as in repair 4 Pole MCCB ,415 volts,fixed type ,125 Amp, 50 Hz, with rupturing capacity 25 KA in theexisting pump starter panel including connecting up incoming/out going cables with suitable lugs and testing complete all as specified and as directed. Make: Indoasian/L&T/ Legrand 189 M&L for rewinding ofelectrical motor , 3 phase, 415 volts with suitable size of copper enameled winding wire and insulating materials incl disconnecting all electrical connections ,decoupling from pump,taking down the motor from foundation /base, cleaning and varnishing the stator & rotor winding, heating and drying, replacement of burnt terminals, greasing to bearings, re-assembling the motor and refixing of motor on the foundation/ base of sunction sweeperby using new nut, bolts and washers, coupling with pump,checking alignment connecting all electrical connections,checking the vibrations, RPM and testing on full load complete all as specified and directed upto 5 HPmotor capacity. 190 M & L for servicing of starter by checking and servicing the contactor coil , over load relay coiland any other parts and replacement the burnt out wiring including any modification to pump starter panel by welding,cutting , grinding ,drillingtesting the panel complete all as specified and directedfor theupto 5 HPcapacity pump setsNotes :-(i) Minor spare parts such as nuts,bolts ,washers ,indicator lamps , start,stop push button and suitable size of copper wire are deemed to be included in quoted rate. 191 Supply and fix in replacement single phase 240V50HzDOL starter with OLR relay suitable for upto 4 HP monoblock pump sets inculding proper termination,testing and all connected acessories all as are specified and directed. 192 Cleaning of service tanks of the capacity as mentioned below on roof top of bldgs upto three storey after disconnection from inlet and outlet pipe, removing of float valve of service tank and keep aside safely for reuse drain out water through drain plug, cleaning thoroughly to remove all scales and dirt by brushing internal surface, cleaning properlyinside with soda wash, flushing out with fresh water, re-positioning of tank at same place, re-connecting inlet and outlet pipes, closing of drain plug, re-installation of float valve duly cleaned, writing/ labelling the record of cleaning carried out with white bold letter such asTANK CLEANED ON--------- (month and year), including removing creepers, vegitation and roots of plants, trees branches on or surrounding of service tank complete all as directed.Note:-(i) Unit rate quoted is deemed to be included for testing of water supply in tank both inlet and outlet flow during next supply hours early in the morning or late in evening.(ii) Contractor shall maintain a pucca bound register for cleaning carried out with date and obtain users signature and remarks if any and this register to be submitted alongwith RAR.(iii)Contractor is liable to rectify any damages to the external finishes of the bldg occured during the cleaning process, i.e. scrubbing and touch up with external paints as existing specifications. Unit rate quoted is deemed too be included the cost of the same.(iv)All sort of petty T&P items such as ladder, safety equipment, nuts, bolts, washers etc. required to accomplish the job shall be provided by the contractor with out any extra cost to dept. 193 (a)For RCC /PVC tank exceeding 200 litters and not exceeding 500 ltrs 194 (b)For RCC /PVC tank exceeding 501 litters and not exceeding 1000 ltrs 195 (c)For RCC /PVC tank exceeding 1001 litters and not exceeding 2000 ltrs 196 (d)For RCC /PVC tank exceeding 2001 litters and not exceeding 5000 ltrs 197 (e)For RCC /PVC tank exceeding 5001 litters and not exceeding 25000 ltrs 198 Material and labour for preparation of old painted external surface by brooming down scrubbing with steel wire brush, scraping old distempered and painted surface and applying two coat of cement base paint to service tanks in building and under ground sump/ RCC Tanks all specified for tanks capacity of 200 to 500 Ltrs. 199 Material and labour for preparation of old painted external surface by brooming down scrubbing with steel wire brush, scraping old distempered and painted surface and applying two coat of cement base paint to service tanks in building and under ground sump/ RCC Tanks all specified for tanks capacity 501-1000 Ltrs. 200 Material and labour for preparation of old painted external surface by brooming down scrubbing with steel wire brush, scraping old distempered and painted surface and applying two coat of cement base paint to service tanks in building and under ground sump/ RCC Tanks all specified for tanks capacity 1001-2000 Ltrs. 201 Material and labour for preparation of old painted external surface by brooming down scrubbing with steel wire brush, scraping old distempered and painted surface and applying two coat of cement base paint to service tanks in building and under ground sump/ RCC Tanks all specified for tanks capacity 2001-5000 Ltrs. 202 Taking down and relaying of existingDI water pipe lines of size 150 mm bore but of any type includings all fittings after removal of scaling, cleaning and flushing etc complete all as specified and directed.Note:Excavation & earthwork shall be measured & paid seperately 203 Taking down and relaying of existingDI water pipe lines of size 100/80 mm bore but of any type includings all fittings after removal of scaling, cleaning and flushing etc complete all as specified and directed.Note:Excavation & earthwork shall be measured & paid seperately 204 M&L as in replacement for Ductile Iron Pipe (DI Pipes), ISI marked, Class K-7, 150 mm dia laid in trenches including jointing material such as EPDM Rubber Gasket and suitable type of grease etc complete all as specified and directed.Note :- (i)DI fitting/special shall be measured and paid separately.(ii)Excavation & earthwork shall be measured & paid seperately 205 Supply and fixing in replacement Non return valve (confirming to IS-5312) (NRV) of size 150 mm ISI marked, CI body suitable for 150 mm dia pipe line complete all specified and directed 206 S&F in replacementfoot valve (confirming to IS-4038) cast iron of size 150 mm bore including rubber insertion, packing material, nuts, bolts, and washer with suitable new one all as specified and directed. 207 Supply and fixing in replacement Sluice valve of size 150 mm dia Cl body, both ends flanged duly drilled, ISI marked with IS-14846-2000, PN-1.6 having Stainless Steel spindle and check nut including operating wheel, fixing with new nuts, bolts, washers and rubber insertion/packing complete all specified and directed. 208 Material and Labour for dismantling the brassspindle from 150 mm dia bore sluice valves in various locations and reconditioning the sluice valve by replacing SS/bronze spindle, spindle nuts with brass ring, gland nuts complete all as specified and as directed. 209 Material and Labour for gland packing in leaking Sluice Valves of 150 mm dia size Complete including replacing/tightening the existing bolts and nuts etc. complete all as directed . 210 Material and Labour for Cutting DI pipes in position for insertion of new tees and socket of size 150 mm dia Complete all as specified and as directed. 211 Supply and fixing in replacement butterfly valve(confirming to IS-13095) of size 150 mm dia Cl body, ISI marked with IS-13095 having double door convex shape to prevent eddies and reaches head loss, neoprene rubber sealing and fitted complete all specified and directed 212 Cutting the existing broken / cracked CI/DI/GI/Asbestos Cement Pipe line of size upto 150mm dia, by dewatering the lekage water from site and removing the old pipe line and addition / alteration to pipe by providing new pipe,welding,bending,grinding,including all accessories such as tee,elbow,collar etc , and ensure any leakage with pressure test complete all as specified and as directed.Note : Pipes and mechanical collar shall be measured and paid seperately 213 M&L for specials fittings suitable for Cast iron / ductile iron /Asbestos cement pipe made out of MS Plate of 12 mm thick complete with mechanical/detachable type arrangement as per site requirementwith MS bolts and nuts of suitable size and MS sheet fabricated to required dia of pipe for prepration of collar/flange, on any pipe leak or cracks of pipe for arresting the leakage complete including rubber ring, packing rubber sheet,set of two collar rings of size 150 mm borecomplete all as specified and as directed. 214 M&L as in replacement for Ductile Iron Pipe (DI Pipes), ISI marked, Class K-7, 100 mm dia laid in trenches including jointing material such as EPDM Rubber Gasket and suitable type of grease etc complete all as specified and directed.Note :- (i)DI fitting/special shall be measured and paid separately. (ii)Excavation & earthwork shall be measured & paid seperately 215 Supply and fixing in replacement Non return valve (confirming to IS-5312) (NRV) of size 100 mm ISI marked, CI body suitable for 100 mm dia pipe line complete all specified and directed 216 S&F in replacementfoot valve (confirming to IS-4038) cast iron of size 100 mm bore including rubber insertion, packing material, nuts, bolts, and washer with suitable new one all as specified and directed. 217 Supply and fixing in replacement Sluice valve of size 100 mm dia Cl body, both ends flanged duly drilled, ISI marked with IS-14846-2000, PN-1.6 having Stainless Steel spindle and check nut including operating wheel, fixing with new nuts, bolts, washers and rubber insertion/packing complete all specified and directed. 218 Material and Labour for dismantling the brass spindle from 100 mm dia bore sluice valves in various locations and reconditioning the sluice valve by replacing SS/bronze spindle, spindle nuts with brass ring, gland nuts complete all as specified and as directed. 219 Supply and fix replacement ofleather packing suitable for foot valve 80 to 100 mm dia, suction pipe flanged connected to pumpsets including replacement ofnuts and bolts etc all as specified and directed 220 Material and Labour for gland packing in leaking Sluice Valves of 100 mm dia size Complete including replacing/tightening the existing bolts and nuts etc. complete all as directed . 221 Material & Labour as in repair for Construction ofValve pit having inner dimensions 900 mm x 900 mm x 900 mm with foundation PCC 1:4:8 type D2 using 40mm grade stone aggregate, brick work with sub class B old size built in Cement mortar 1:6, PCC 1:2:4 type B1 using 20mm stone aggregate for Coping, 15 mm thick rendering plaster in CM 1:4 inluding MS cover with locking arrangement all as specified and as directed.Note :- MS work as in Chamber Covers shall be measured and paid separately under relevant item of this schedule. 222 Material and labour for Fabricate supply and fix valve chamber coversmade out of suitable size MS angle/MS plate/flat/rod, hinges, locking arrangement including painting with two coats of synthetic enamel paint over one coat of red oxide primer including removimg existing unserviceable rusted cover all as directed. 223 Material and labourfor Painting with two coats of synthetic enamel paint over a coat of zinc chrome on surfaces of any description, over 10cm in width or girth,not otherwise described complete all specified and directed. 224 Material and labourCleaning of valve pit chamber for sluice/gate valve of 50/80/100/150/200/ size by removing mud/ grass/ sludge/ other waste materialsfrom the chamber and from surroundings upto 1mtr distance, carryout petty cement repairs with cement mortar 1:4, apply one coat of white wash on cemented surfaces and one coat of synthetic paint on steel surfaces complete to make an operator friendly valve chamber complete as specified and directedNote :- Periodicity and locations of valve chambers shall be given as per requirement by the Engineer-in-Charge. 225 Cutting the existing broken / cracked CI/DI/GI/Asbestos Cement Pipe line of size upto 100mm dia, by dewatering the leakage water from site and removing the old pipe line and addition / alteration to pipe by providing new pipe,welding,bending,grinding,including all accessories such as tee,elbow,collar etc , and ensure any leakage with pressure test complete all as specified and as directed.Note : Pipes and mechanical collar shall be measured and paid seperately 226 M&L for specials fittings suitable for Cast iron / ductile iron /Asbestos cement pipe made out of MS Plate of 12 mm thick complete with mechanical/detachable type arrangement as per site requirementwith MS bolts and nuts of suitable size and MS sheet fabricated to required dia of pipe for prepration of collar/flange, on any pipe leak or cracks of pipe for arresting the leakage complete including rubber ring, packing rubber sheet,set of two collar rings of size 100 mm borecomplete all as specified and as directed. 227 Supply and Fixing as in replacement MCCB, 4 poles 415 Volts, 100 Amps, 16 KA, 50 Hz, AC, adjustable thermal and magnetictype in the existing pump starter panel including connecting up incoming/out going cable with suitable lugs and testing complete all as specified and as directed.Make : Legrand/Indo asian/L&T 228 M&L as in replacement for Ductile Iron Pipe (DI Pipes), ISI marked, Class K-7, 80 mm dia laid in trenches including jointing material such as EPDM Rubber Gasket and suitable type of grease etc complete all as specified and directed.Note :- (ii) DI fitting/special shall be measured and paid separately. (i)Excavation & earthwork shall be measured & paid seperately 229 M & L for DI specials and fittings as per IS for spigot and socketed pipes or flanged pipe for water mains branch lines such as bends(any type radious and angle ) tapers any type (straight, bend,increasing,decresing,or double socket etc) tee pices,single branch,Y juntion, double branch, cross, including connecting pieces one end flanged and other socket or spigot and bell mouth pices suitable for rubber joint,tyton joint up to 150 mm bore and conforming to IS-9523: 2000 complete all as specified and directed. 230 Note :-(a) In case of laying of CI/GI/DI pipe line is to be executed in civil area, it will be the responsibility of the contractor to obtain necessary permission for cutting of road & berm from BWSSB. 231 (b) For this purpose amount to be paid online to BWSSB, same is deemed to be included in unit quoted rate. 232 (c) The T&P like JCB, Drill Machine, Moveable Generator etc required for cutting of road shall be arranged by the contractor & no extra cost shall be paid for the same. 233 (d) After execution of work, the contractor will make good disturbed portion of road with bitumen or PCC complete as directed by Engineer-in-Charge. Cost of the same is deemed to be included in unit quoted rate. 234 Supply and fixing in replacement Sluice valve of size 80mm dia Cl body, both ends flanged duly drilled, ISI marked with IS-14846-2000, PN-1.6 having Stainless Steel spindle and check nut including operating wheel, fixing with new nuts, bolts, washers and rubber insertion/packing complete all specified and directed. 235 Material and Labour for dismantling the brass spindle from 80 mm dia bore sluice valves in various locations and reconditioning the sluice valve by replacing SS/bronze, spindle nuts with brass ring, gland nuts complete all as specified and as directed. 236 Material and Labour for gland packing in leaking Sluice Valves of 80 mm dia size Complete including replacing/tightening the existing bolts and nuts etc. complete all as directed . 237 S&F in replacementfoot valve (confirming to IS-4038) cast iron of size 80 mm bore including rubber insertion, packing material, nuts, bolts, and washer with suitable new one all as specified and directed. 238 Supply and fixing in replacement Non return valve (confirming to IS-5312) (NRV) of size 80 mm ISI marked, CI body suitable for 80 mm dia pipe line complete all specified and directed 239 Supply and fixing in replacement Non return valve (confirming to IS-5312) (NRV) of size 65 mm ISI marked, CI body suitable for 65 mm dia pipe line complete all specified and directed 240 Material and Labour for Cutting DI pipes of size 200/150/100/80 in position for insertion of new tees and socket of size15/20 mm dia Complete all as specified and as directed. 241 Material and Labour for Plain Cement Concrete (1:2:4), type B1 (using 20 mm graded crushed stone aggregate) as in Coping, bands benching etc including finishing the concrete surfaces even and smooth without using extra cement including necessary form work Complete all as specified and directed. 242 Supply and fixing in replacement of Air Release Valve of size 40 mm dia Cl body, ISI marked of IS 14845 of 1.6 PNincluding fixing arrangement of existing 150 mm dia DI pipe line with new nuts, bolts, washers and rubber insertion/packing complete all specified and directed. 243 Making arrangement to flush out the existing pipe line of any type upto 50mm bore and upto 100m length, applying 4.5 N/sqmm pressure to remove scalings/ sludges/ other blocking materials to make smooth flow of water including testing all as specified and directed. 244 Making arrangement to flush out the existing pipe line of any type 63 to 100 mm bore and upto 100m length, applying 4.5 N/sqmm pressure kg/sq cm pressure to remove scalings/ sludges/ other blocking materials to make smooth flow of water including testing all as specified and directed. 245 Material and labour for Making arrangement to flush out the existing pipe line of any type 110 to 150mm bore and upto 100m length, applying 4.5 N/sqmm pressure to remove scalings/ sludges/ other blocking materials to make smooth flow of water including testing all as specified and directed. 246 Material and labour for Making arrangement to flush out the existing pipe line of any type 160 to 200 mm bore and upto 100m length, applying 4.5 N/sqmm pressure to remove scalings/ sludges/ other blocking materials to make smooth flow of water including testing all as specified and directed. 247 Note for item 243 to 246 :-(i)The Contractor is deemed toarrange necessary tools and equipments, removing or alteration of fittings from existing pipe lines, arragement of plugging devices, etc to build up specified pressure required to wash out the pipes. This will be inclusive in quoted rate. (ii)Excavation and earth work required shall be measured and paid seperately. (iii)The flushing out shall be carried out with fresh filled water of well only duly chlorinated with specified sodium hypochlorite solution to disinfect the pipe lines from all pathogens and Coliform organisms.This will be inclusive in quoted rate. 248 Material and labour for dewatering & Cleaning ofRCC Over Head Tanks of the followingcapacities by comprisingof the followings 09 (NINE) stage of cleaning process complete all as specified and directed:-(i)De-watering by high pressure submersible pump all complete (Notes for item No 249 to 261) :- The Bidder shall take into consideration for following points while quoting his rate for this item andthe unit rate is deemed to be included for :-(i) The contractor shall provide dewatering pump of suitable capacity and mobile generatorfor operation of dewatering by high pressure submersible pump (or) Diesel driven high pressure pump and the rate quoted is inclusive of rent/hiring charges complete. (ii) Cuttingand filling, cleared of shrubs, vegetation, grass bush, weed, trees and sapling not exceeding 30 cm in girth, measured at a height of two metre above ground level. Useful material shall be stacked.(iii) Material removed from the tank shall be disposed off to out side MD land.(iv) Tank shall be made available for cleaning for a period of 8 hours only and contractor has to arrange sufficient labour/ T&P to complete the job with the given period only. or otherwise penalty shall be imposed @ Rs 500/- per day.(v) All safety gadgets like safety Belts, special safety ladder, Helmets, Heavy Duty Gum Boots,Gloves, Safety Goggles, Masks, Aprons, etc. for complete security safe operations, Storage and Cleaning equipment’s like Scrubbers/Wipers, Storage drums, Sludge Collectors and Cisterns, etc. must be integral part of system. (vi) Removal of sludge fromRCC Over Head Tanks(vii)Cleaning of walls, floors, ceiling etc by high pressure jet pump 80-180 bar pressure all complete(viii)Removing dirt and sludge by vacuum pump(ix) Anti- Bacterial Treatment of inside of tank effective againstall pathogens all complete.(x) Sterilization of the tank atomosphere by UV radiation inside of the tank.(xi) Applying one coat of white wash to internal surfaces.(xii)Replace nylon net for vent pipes &man hole cover(xiii)Writing letter in bold with white paint on black colour back ground such as sump number, capacity, cleaned on Date & Due on Date etc 249 250000 gallon capacity22 Mt heightat ETI Tank 250 150000 gallon capacity22 Mt heightat Bhatiya tank 251 150000 gallon capacity15 Mtr height at GLR 1 and GLR 2 Double tank 252 150000 gallon capacity12.5 Mtr height at IMH Area 253 150000 gallon capacity22 Mt height at E&ITI Tank 254 100000 gallon capacity 18 Mtr height at Bhatia tank,West 255 75000 gallon capacity 18 Mtr height at Umbrella tank 256 50000 gallon capacity18 Mtr height at Domestic Area 257 30000 gallon capacity25 Mtr height at CE Complex 258 25000 gallon capacity16 Mtr height at MAP, 54 Civ. 259 25000 gallon capacity18 Mtr height at Double tank168 WO 260 20000 gallon capacity12 Mtr height at Height at KV School 261 20000 gallon capacity12 Mtrheight at 90 CIV Pump House 262 M & L for Fixing in repairs Water Level Indicator consisting of float ball, nylon rope, Scale for water level indication made out of MS frame with pulley and indicating pointer for OHT at different places all as specified and directed . 263 Supply and fixing as in repair for aluminium earth continuity conductor or main earthing lead fixed to wall /roof top for lightning arresterfixed to OHT or other indicated situation for loop earthing etc. as required for 25 mm x 3 mm thick, aluminium using porcelain clit/post insulators with screw / selfdril GIscrew with rubber washer , complete all as specified and directed. 264 Supply and fix as in repair TPN MCB ,415 volts,fixed type ,40 Amp, 50 Hz, with rupturing capacity 10 KA in theexisting pump starter panel including connecting up incoming/out going cables with suitable lugs and testing complete all as specified and as directed. Make: Indoasian/L&T/ Legrand 265 S&F as in repair single core multistrand flexible copper cable of size 35 Sqmm x 1 core , includinglugs , connecting up with nuts and bolts, insulation tape wrappingetc , the selection of cable as per colour code all as specified and directed Make : Havells /Polycab/RPGAsian 266 Excavation in trenches not exceeding 1.5 mtr in width and not exceeding 1.5 mtr in depth for laying of cables up to proper level and laying of pipelines etcinany type of soil, complete all as specified and directed. 267 Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and directed. 268 Removing surplus excavated material (soil) not exc 50 meter and depositing where directed at a level not exc 1.5 meter above the starting point, complete all as specified and directed. 269 Material and labour for Spreading ribbed soil in trenches as in cable cushioning all as per IS 1255-1983, complete all as specified and directed.Note :- (i)Excavated approved soil shall be ribbed by using sieve to separate composite particles etc. as per IS and refilling in trenches before laying of cable 8 CM and 15 CM after laying of cable. This is then gently punned down to a depth of 10 cm above the top of upper most cable (ii) For the purpose of measurement only punned thickness shall be considered for payment. 270 Material and labour for well burnt bricks ‘B’ class as mechanicalprotection to under ground cables laying with length of the bricks equal to the width of the trench, complete all as specified and directed. 271 Material and labour for Cutting existing road/PCC/Drain for laying of GI or any type of pipe including necessary earthwork, excavation exc 600mm depth but not exc 1mtr depth, 800 mm wide including making good existing surface with 150 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate, complete all as specified and directed. Note :-The tenderer shall take into consideration for following points while quoting rate for this item andthe unit rate is deemed to be inclusive for :-(i) Earth work and excavation in any type of soil(ii) Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick complete all as specified and as directed.(iii) Removing excavated material to out side MD.(iv)Laying of any type/any bore of pipe in trenches including taking down. Supply of pipe shall be measured and paid separately(v)150 mm thickPCC 1:2:4 type B1 using 20mm graded stone aggregate as inroad to make good existing disturbed surfaces. 272 Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 100 mm dia suitable for 0.4 mpa working pressure. 273 Material and labour in repair for 3 ½ core 70 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make:- Havells/ Polycab/ RPG Asian Note - Earthwork and bricks to be paid separately in respective items. 274 Material and labour in repair for 3 ½ core 50 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make:- Havells/ Polycab/ RPG Asian Note - Earthwork and bricks to be paid separately in respective items. 275 Supply, installation, commissioning and testing of factory assembled, floor mounted, free standing type tested LT Feeder pillar panel, with canopy, as per electrical specifications for outdoor installation to be made of IP65 Polycarbonate modular enclosures. The enclosures made of polycarbonate, should be weather/vermin proof, anti -acid, anti-corrossive, UV resistance in accordance with IEC 61439-1, fire retardant and self extingushing in accordance with IEC 60695-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960 degree in accoardance with 60695-2-11.Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262,IP65 in accordance with IEC-60529 and IEC- 60439-1, should have dielectric properties, RoHS compliants & Halogen free. The manufacturer of boards/panels shall submit a copy oftype test reports as per above mentioned norms either from UL/ERDA/CPRI/NABL labs in india.The panel should be modular and compartmentalized in construction with opaque and transparent doors, properly tightened to base with thermoplastic screws having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosure should be minimum 200mm for air circulation & to minimize temp rise. Panel should be fitted with one No.polycarbonate IP 65, 9 W LED translucent bulk head luminaire color lamp not less than 6500K, PF >0.95 under canopy for easy maintenance. Panel shall be fitted outside with one No of 16 Amp 3 Pole IP65 industrial socket and 01 No. of 32Amp 5P IP 65 industrial socket. 3 Phase and neutral 630 Amp current carrying capacity of aluminium bus bar insulated with colour coded heat shrinkable sleeves with SMC/DMC insulators,complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) type C-1 using 20mm graded aggregate forbedding upto a height of 45 CM above ground level, including dismanting and taking out old U/s LT panel board and reconnecting existing LT UG Cable with new panel board amplete all as specified and all as directed and comprising of the following:- 276 (a) ON load change over switch 4 Pole, 415 V of capacity 400 Amp, 36 KA - 01 No. (b) MCCB with thermal magnetic release 4 Pole, 415 V of capacity400 Amp,36 KA- 02 Nos.(c) Multifunction Meter (V,I,PF) with suitable capacity of CTs- 01 No(d) Indicating lamp (R-Y-B) set LED type with backup MCB for 3 Phase Supply - 01 set. (e) Space for spare feeder - 01 No. Note :-(i) The Contractor shall submit the drawing for approval of GE before executing the work.(ii) Insulators, bus bar sleeves, lugs, gland etc including complete wiring with suitable size of copper wire are all inclusive in unit quoted rate. (iii) Make of Switch gear : Schneider/L&T/C&S.(vi) MCCB should be ICu =100% ICs.(v) Make of LT Panel/FPB shall be as mentioned in list of makes (PS). 277 Supply, installation, commissioning and testing of factory assembled, floor mounted, free standing type tested LT Feeder pillar panel, with canopy, as per electrical specifications for outdoor installation to be made of IP65 Polycarbonate modular enclosures. The enclosures made of polycarbonate, should be weather/vermin proof, anti -acid, anti-corrossive, UV resistance in accordance with IEC 61439-1, fire retardant and self extingushing in accordance with IEC 60695-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960 degree in accoardance with 60695-2-11.Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262,IP65 in accordance with IEC-60529 and IEC- 60439-1, should have dielectric properties, RoHS compliants & Halogen free. The manufacturer of boards/panels shall submit a copy oftype test reports as per above mentioned norms either from UL/ERDA/CPRI/NABL labs in india.The panel should be modular and compartmentalized in construction with opaque and transparent doors, properly tightened to base with thermoplastic screws having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosure should be minimum 200mm for air circulation & to minimize temp rise. Panel should be fitted with one No.polycarbonate IP 65, 9 W LED translucent bulk head luminaire colour lamp not less than 6500K, PF >0.95 under canopy for easy maintenance. Panel shall be fitted outside with one No of 16 Amp 3 Pole IP65 industrial socket and 01 No. of 3 2Amp 5P IP 65 industrial socket. 3 Phase and neutral 400 Amp current carrying capacity of aluminium bus bar insulated with colour coded heat shrinkable sleeves with SMC/DMC insulators,complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) type C-1 using 20mm graded aggregate forbedding upto a height of 45 CM above ground level, including dismanting and taking out old unserviceable LT panel board and reconnecting existing LT UG Cable with new panel board complete all as specified and all as directed. This comprising of the following:- 278 (a) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 200 Amp, 25 KA - 01 No (Incomer). (b) MCCB with thermal magnetic release 4 Pole, 415 V of capacity63 Amp,10 KA- 05 Nos (OG).(c) Multifunction Meter (V,I,PF) with suitable capacity of CTs- 01 No(d) Indicating lamp (R-Y-B) set LED type with backup MCB for 3 Phase Supply - 01 set. (e) Space for spare feeder - 01 No. Note :-(i) The Contractor shall submit the drawing for approval of GE before executing the work.(ii) Insulators, bus bar sleeves, lugs, gland etc including complete wiring with suitable size of copper wire are all inclusive in unit quoted rate. (iii) Make of Switch gear : Schneider/L&T/C&S.(vi) MCCB should be ICu =100% ICs.(v) Make of LT Panel/FPB shall be as mentioned in list of makes (PS). 279 Supply, installation, testing & commissioning of maintenance free chemicalearthing system comprising of 17mm dia copper bondedrod 3 mtr long horizontally pre welded T-terminal rod with provision for connection size of 50 x 150mm long, 6mm thickness with equal space either side, with 12mm dia hole of 02 numbers each on either side of the terminal clamp with 250 microns (average) coating thickness, tested and certified by CPRI India alongwith 50 Kg earth energizer compound and 10 litres earth resistance reducingliquid. The earthing energizer compound and resistance reducing earthing liquid shall be tested as per IEC-62561-7 read with ASTM G57-06, CI 3.4 A by any NABL accredited lab. The above mentioned rod shall be installed in 4-6 inch bore, 12 feet depth with a distance of minimum 3 meters between each installation including taking down existing one, complete all as specified and directed..Make : Model HTSP 317 of safeTrode or equivalent in Snaga/ Cubes 6 Global 280 The quoted rate shall also deemed to be included the following :- (i)Prior toinstallation of maintenance free chemicalearthing, soil resistivity test to be carried out at the location where earthingwork to be donein presence of Engr-in- Charge/JE (E/M),user and the report has tosubmitto Garrison Engineer with recommendation of manufacturer, if required additional interconnection ofearthing (not more than 08 number of earthing) to achive earth result less then 1 Ohms. The arrangement done for soil resistivity testingandsubmission of report with recommendationdeemed to be included in the quoted rate. 281 (ii) The description/ size/ qty of items mentioned in above are for indicating only however qty/ size may vary at site condition to maintain the earth resistance 1 ohm. The contractor shall quote rate by considering all factors. 282 (iii) Rateofearth energizer compound of 25 Kg of 02 bags and earthresistance reducingliquid 10 litre per cane for each pit deemed to be included in the quoted rate. 283 (iv)Resistivity of earth energizer compound and resistance reducing earthing liquid shall be certified by any NABL accredited lab carried out as per IEC-62561-7 read with ASTMG57-06, CI-3.4A and the certificate of same shall be submitted by the contractor along with the sample approval 284 (v) Earth enhancing material should not leach into the adjacent soil or underground water channels and its PH value should be in neutral range complete all as specified and as directed. It should solidify when mixed with water and set like concrete. 285 (vi) Copper strip of size 20 x 3 mm shallbe fixed on proper post insulator at the instrument end (copper strip upto 7.5 RM shall be considered in unit quoted rate and extra will be measured and paid separately). 286 (vii)Testing of earth shall be carriedout in presence ofdepartmental and user representativeand report shall be submitted to Garrison Engineer duly signed by all concerned. 287 (viii)Earth resistance tester will be provided by the contractor.Tester should be calibrated from authorised company/ lab. 288 (ix)Earthing shall be tested after completion of work by the contractor in presence of Engr-in-charge, user and proper record shall be maintained duly signed by all concerned.After testing if the desired earth resistance of less than 1 Ohm is not obtained, the earthing will be redone at no extra cost to Govt. till desired result is obtained. 289 (x) The contractor shall give a written guarantee of minimum three years for maintaining the earth resistance less than 1 Ohm after certified date of completion. 290 (xi) No further maintenance or periodic watering or recharge shall be required in earthing during its guarantee period of over 03 years in all type of soil including soft/ disintegrated or hard rock. 291 (xii) During the guarantee period, if earth resistance is not maintained less than 1 ohm the contractor has to redo or rectify at no extra cost to Govt till desired result is maintained. 292 (xiii) A security deposit of value equal to 2.5 % of the rate quoted for chemical earthing for each earthing shall be retained from payment due to the contractor from final bill for the guarantee period. 293 (xiv) The electrode shallcarry manufacturers name . 294 (xv) The connection clamp shall be permanentlly welded to the copper boundedrodto avoid any kind of connectivity loss,.The pre-welded copper bounded rod shall not need any additional clamp for termination. 295 (xvi) The acceptable earth resistance at earth busbar/ test point shall not be more than 0.1 ohm. 296 (xvii)Earth work such as auguring andmaking good the surrounding area shall carried out in any type of soil. 297 (xviii)The contractor shall submit CPRI India certified document for copper bounded rod to ensure genuineness of material. 298 (xix) Sign boardof mild steel sheet 2 mm thick duly painted with two coats of synthetic enamel paint over a coat of red oxideZinc chrome primer showing result of earthing shall be fixed near the earth pit after completion as directed by engr -in- charge. 299 Material and labour for Earth pit cover madeof heavy duty poly plastic of high grade polypropylene tested and certified by any NABL accredited lab for load bearing capacity not less than 7.2 tonnes with top dia not less than 250mm, bottom dia not less than 330 mm and height not less than 260 mm for each electrode pit complete including taking down old unserviceable pit cover of any decription all as specified and directed.Make : Model SEPC 250 of SAFE TRODE or equivalent in Snaga/ Cubes 6 Global 300 S&F in repair copper strip 20 x 3mm thick as earthing lead fixed to wall/roofs etc including taking down existing old unserviceable copper strip etc, complete all as specified anddirected. Note : - All Joints should be joined by Exothermic Welding or Brazing. 301 Supply and fix for GI pipe light grade 50 mm dia for cable protection on road crossings /plinth protection with fixed to the pole wall etc along withsuitable fittings for cable protection etc complete all as specified and directed. 302 Material and labour in repair for3 ½ core 25 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make:- Havells/ Polycab/ RPG Asian Note - Earthwork and bricks to be paid separately in respective items. 303 Material and labour in repair for 4 core 10 Sqmm XLPE insulated heavy duty electric cable with aluminium multi stranded conductor 1100 volts grade served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall sheathed laying in trenches/cable ducts, fixed to wall/pole, complete all as specified and directed. Make:- Havells/ Polycab/ RPG Asian Note - Earthwork and bricks to be paid separately in respective items. 304 Supply, installation, commissioning and testing of factory assembled, floor mounted, free standing type tested LT Feeder pillar panel, with canopy, as per electrical specifications for outdoor installation to be made of IP65 Polycarbonate modular enclosures. The enclosures made of polycarbonate, should be weather/vermin proof, anti -acid, anti-corrossive, UV resistance in accordance with IEC 61439-1, fire retardant and self extingushing in accordance with IEC 60695-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960 degree in accoardance with 60695-2-11.Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262,IP65 in accordance with IEC-60529 and IEC- 60439-1, should have dielectric properties, RoHS compliants & Halogen free. The manufacturer of boards/panels shall submit a copy oftype test reports as per above mentioned norms either from UL/ERDA/CPRI/NABL labs in india.The panel should be modular and compartmentalized in construction with opaque and transparent doors, properly tightened to base with thermoplastic screws having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosure should be minimum 200mm for air circulation & to minimize temp rise. Panel should be fitted with one No.polycarbonate IP 65, 9 W LED translucent bulk head luminaire color lamp not less than 6500K, PF >0.95 under canopy for easy maintenance. Panel shall be fitted outside with one No of 16 Amp 3 Pole IP65 industrial socket and 01 No. of 32Amp 5P IP 65 industrial socket. 3 Phase and neutral 400 Amp current carrying capacity of aluminium bus bar insulated with colour coded heat shrinkable sleeves with SMC/DMC insulators,complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) type C-1 using 20mm graded aggregate forbedding upto a height of 45 CM above ground level, including dismanting and taking out old U/s LT panel board and reconnecting existing LT UG Cable with new panel board amplete all as specified and all as directed and comprising of the following:- 305 (a) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 250 Amps, 25 KA- 01 No (Incomer).(b) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 160Amps, 25 KA- 01 Nos.(c) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 63Amps, 10 KA- 01 Nos.(d) Multifunction Meter (V,I,PF) with suitable capacity of CTs- 01 No.(e) Indicating lamp (R-Y-B) set LED type with backup MCB for 3 Phase Supply - 01 set.(f) Space for spare feeder - 01 No. Note :-(i) The Contractor shall submit the drawing for approval of GE before executing the work.(ii) Insulators, bus bar sleeves, lugs, gland etc including complete wiring with suitable size of copper wire are all inclusive in unit quoted rate. (iii) Make of Switch gear : Schneider/L&T/C&S.(vi) MCCB should be ICu =100% ICs.(v) Make of LT Panel/FPB shall be as mentioned in list of makes (PS). 306 Supply, installation, commissioning and testing of factory assembled, floor mounted, free standing type tested LT Feeder pillar panel, with canopy, as per electrical specifications for outdoor installation to be made of IP65 Polycarbonate modular enclosures. The enclosures made of polycarbonate, should be weather/vermin proof, anti -acid, anti-corrossive, UV resistance in accordance with IEC 61439-1, fire retardant and self extingushing in accordance with IEC 60695-2-11, UL subject 94 for flammability V-0, should pass glow wire test for 960 degree in accoardance with 60695-2-11.Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262,IP65 in accordance with IEC-60529 and IEC- 60439-1, should have dielectric properties, RoHS compliants & Halogen free. The manufacturer of boards/panels shall submit a copy oftype test reports as per above mentioned norms either from UL/ERDA/CPRI/NABL labs in india.The panel should be modular and compartmentalized in construction with opaque and transparent doors, properly tightened to base with thermoplastic screws having sealing gaskets of extruded silicon rubber to withstand adverse weather effects. The depth of modular enclosure should be minimum 200mm for air circulation & to minimize temp rise. Panel should be fitted with one No.polycarbonate IP 65, 9 W LED translucent bulk head luminaire color lamp not less than 6500K, PF >0.95 under canopy for easy maintenance. Panel shall be fitted outside with one No of 16 Amp 3 Pole IP65 industrial socket and 01 No. of 32Amp 5P IP 65 industrial socket. 3 Phase and neutral 600 Amp current carrying capacity of aluminium bus bar insulated with colour coded heat shrinkable sleeves with SMC/DMC insulators,complete with the following switch gears and mounting the panel board on ground with PCC (1:3:6) type C-1 using 20mm graded aggregate forbedding upto a height of 45 CM above ground level, including dismanting and taking out old U/s LT panel board and reconnecting existing LT UG Cable with new panel board amplete all as specified and all as directed and comprising of the following:- 307 (a) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 400 Amps, 36 KA- 01 No (Incomer).(b) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 200Amps, 25 KA- 01 No.(b) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 160Amps, 25 KA- 03 Nos.(b) MCCB with thermal magnetic release 4 Pole, 415 V of capacity 63 Amps, 10 KA- 02 No(c) Multifunction Meter (V,I,PF) with suitable capacity of CTs- 01 No.(d) Indicating lamp (R-Y-B) set LED type with backup MCB for 3 Phase Supply - 01 set.(e) Space for spare feeder - 01 No. Note :-(i) The Contractor shall submit the drawing for approval of GE before executing the work.(ii) Insulators, bus bar sleeves, lugs, gland etc including complete wiring with suitable size of copper wire are all inclusive in unit quoted rate. (iii) Make of Switch gear : Schneider/L&T/C&S.(vi) MCCB should be ICu =100% ICs.(v) Make of LT Panel/FPB shall be as mentioned in list of makes (PS). 308 Material and labour for dewatering & Cleaning of RCC UG sumps of the followingcapacities by comprisingof the followings 09 (Nine) stage of cleaning process complete all as specified and directed(i)De-watering by high pressure submersible pump complete (Note for item No 309 to 316 :-The Bidder shall take into consideration for following points while quoting his rate for these items andthe unit rate is deemed to be included for :-(i) The contractor shall provide dewatering pump of suitable capacity and mobile generatorfor operation of dewatering by high pressure submersible pump (or) Diesel driven high pressure pump and the rate quoted is inclusive of rent/hiring charges complete. (ii) Cuttingand filling cleared of shrubs, vegetation, grass bush, weed, trees and sapling not exceeding 30 cm in girth, measured at a height of two metre above ground level. Useful material shall be stacked.(iii) Material removed from the tank shall be disposed off out side MD land.(iv) Tank shall be made available for cleaning for a period of 8 hours only and contractor has to arrange sufficient labour/ T&P to complete the job with the given period only. or otherwise penality shall be imposed @ Rs 500/- per day.(v) Removal of sludge from sump(vi)Cleaning of walls, floors, ceiling etc by high pressure jet pump 80-180 bar pressure all complete(vii)Removing dirt and sludge by vaccum pump(viii) Anti- Bacterial Treatment of inside of tank is effective againstall pathogens all complete.(ix) Sterilization of the tank atomosphere by UV radiation inside of the tank.(x) Applying one coat of white wash internal surfaces.(xi)Replace nylon net for vent pipes &man hole cover(xii)Writing letter in bold with white paint on black colour back ground such as sump number, capacity, cleaned on Date & Due on Date etc 309 Underground sump of capacity 200000 gallon at Range pump house. 310 Semi underground sump of capacity 200000 gallon at Ayyappa Temple/ pump house. 311 Semi underground sump of capacity 120000 gallon at Service tank Pump house 312 Underground sump of capacity 50000 gallon at Gurukul 313 Semi underground sump capacity of 50000 at AFTC Pump House 314 Underground sump of capacity50000 gallon at AFTC Pump House, range pump house 315 Underground sump of capacity 20000 gallon at 91 CIV Pump house 316 Underground sump of capacity 10000 gallon at CE Complex/ pump house 317 M & L for Fixing in repairs Water Level Indicator consisting of float ball, nylon rope, Scale for water level indication made out of MS frame with pulley and indicating pointer for UG sumpat different places all as specified and directed . 318 Cleaning of UGopen static Water Tank (SWT) of the followingcapacities by comprisingof the followings 07 (Seven) stage of cleaning process for the undermentioned capcities complete all as specified and directed:-(i)De-watering by high pressure submersible pump all complete (ii) Removal of sludge/mud/silt/sand from sump and disposal out side MD land(iii)Cleaning of walls, floors, ceiling etc by high pressure jet pump 80-180 bar pressure all complete(iv)Removing dirt and sludge by vacuum pump(v) Applying one coat of white wash internal surfaces.(vi)Replace nylon net for vent pipes &man hole cover(vii)Writing letter in bold with white paint on black colour back ground such as sump number, capacity, cleaned on Date & Due on Date etc Note : The contractor shall arrange mobile generatorfor operation of dewatering by high pressure submersible pump (or) Diesel driven high pressure pump and the unit quoted rate is inclusive of rent/hiring charges complete. 319 20000 Gallons capacity at ETI. 320 15000 Gallons capacity at E & ITI. 321 10000 Gallons capacity near SSC. 322 S&F as in repair single core multistrand flexible copper cable of size 25 Sqmm x 1 core , includingof lugs , connecting up with nuts and bolts, insulation tape wrappingetc , the selection of cable as per colour code all as specified and directed Make : Havells /Polycab/RPGAsian 323 Material and labour for removing the submersible pump set of capacity for 7.5 to 15 HP including pipes and submersible cables complete from the exisiting bore well of depth up to 200 mtr by any suitable method i.e either manual.vehicle mounted motorized system and disconnecting the pump motor to locate the faults in presence of Engr-in-Charge, transporting to Wksp and carry out repairs, reassembling, lowering to bore well after repairs, testing and commissioning complete all as specified and directed 324 M&L for taking out, dismantling pump and motor of submersible pump set of capacity for 7.5 to 15 HP to carry out repairs and replacements , duly rewinding and replacing worn out parts, applying one coat of spray painting with synthetic enamel paint of existing colour and testing and inserting in borewell after repair complete all as specified and directed.Note :- (a)The spares shall be measured and paid seperately in the relevent items given below as supply only.(b) Cost of labour for replacement of spares and transportation are deemed to be included in the quoted rate. (c)The pumpset shall be spared for one week for repair from the date of complaint given by AGE/ JE E/M regarding breakdown. Thecontactor is responsible for making alternate arrangement of pump set in case of time required more than one week.(d)In case services affected due to delay in repair of pump set, a penalty of Rs 500 per day will be levied from the contactor.(e)Please note that this penalty is exclusively other then the condition 67 of IAFW-2249 and shall be treated as interim condition of the contract.(f)The decision of the Accepting Officer in this regard shall be final and binding. 325 Supply only GM Bush suitable for 7.5 HP to 15 HP submersible pumpset as per manufacturers design complete all as specified and as directed. 326 Supply only SS coupling bearing suitable for 7.5 HP to 15 HP submersible pumpset as per manufacturers design complete all as specified and as directed. 327 Supply only sleeve MS key for impeller suitable for 7.5 HP to 15 HP submersible pumpset as per manufacturers design complete all as specified and as directed. 328 Supply onlySand Guard suitable for 7.5 HP to 15 HP submersible pumpset as per manufacturers design complete all as specified and as directed. 329 Supply only oil seal thrust bearing suitable for 7.5 HP to 15 HP submersible pumpset as per manufacturers design complete all as specified and as directed. 330 M&L flat three core PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors 1100 Volt, conforming to IS 694, 6 Sqmm nominal area complete including taking out old unserviceable cable complete all as specified and directed. Make :- Havells/Polycab/Finolex/KEI 331 S & F in repair Over load Relay range of (1.6 -2.5 Amps ) , max-10A (as per sample) for 1.5 HP starter (Dol/Star delta) complete all as directed. 332 S & F as in replacementONload change over switch 4 pole 250Amps in sheet metal enclosure complete all as specified and as directed. make :-Havells /L&T/Indo Asian 333 M & L for servicing of submersible starter by checking and servicing the contactor coil , over load relay coiland any other parts and replacement the burnt out wiring including any modification to pump starter panel by welding,cutting , grinding ,drillingtesting the panel complete all as specified and directedfor the7.5 HP to 15 HP capacity pump setsNotes :-(i) Minor spare parts such as nuts,bolts ,washers ,indicator lamps , start,stop push button and suitable size of copper wire are deemed to be included in quoted rate. 334 Supply and fix as in repair TPNMCB ,415 volts,fixed type ,63 Amp, 50 Hz, with rupturing capacity 10 KA in theexisting pump starter panel including connecting up incoming/out going cables with suitable lugs and testing complete all as specified and as directed. Make: Indoasian/L&T/ Legrand 335 S&F as in repair single core multistrand flexible copper cable of size 16 Sqmm x 1 core , including of lugs , connecting up with nuts and bolts, insulation tape wrappingetc , the selection of cable as per colour code all as specified and directed Make : Havells /Polycab/RPGAsian 336 S & F in repair Over load Relay range of (0.1 -1.5 Amps ) , max- 5A (as per sample) for 0.5 HP starter (Dol/Star delta) complete all as directed . 337 Note :- An amount of Rs 1,91,800.00 on account of credit schedule for schedule A part II shall be deducted from the total amount of BOQ to arrive at the contract sum.

BRR : 5061594 Tender For Park Development At Perumbakkam, Chennai; 1 Civil Works 2 Earth Work Excavation For Foundation In All Soils And Sub-Soils And To Full Depth As May Be Directed Except In Rock Requiring Blasting Inclusive Of Shoring Shuttering, Bailing Out Water Wherever Necessary And Depositing The Surplus Earth Within The Compound In Places Shown By Thedepartmental Officers With An Initial Lead Of 10 Mts And Initial Lift Of 2 Mts. And Clearing And Levelling The Site, Etc., Complete Complying With Standard Specification. 3 Supplying And Filling In Foundation, Basement, Etc With Filling M-Sand In Layers Of Not More Than 15 Cm Thick Well Watered, Rammed And Consolidated Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. 4 Supplying And Filling Approved River Sand Of Specified Quality For Sand Pits In Play Zone Area. The Rate Including The Cost Of Sand, Labour Charges, Tools And Tackles, Royalties, Transportation To Site For All Leads And Lifts, Loading, Unloading, Spreading In Layer Not Exceeding 150 Mm Thick, Watering, Ramming, Compacting With Mechanical Compactors And / Or Other Equipment To Specified Levelall Complete And As Per The Standard Specification. 5 Plain Cement Concrete 1:4:8 ( One Cement, Four Sand And Eight Hard Broken Stone Jelly ) Using 40 Mm Gauge Hard Broken Granite Stone Jelly For Foundationincluding Dewatering Wherever Necessary And Laid In Layers Of Not More Than 15 Cm Thick Well Rammed, Consolidated And Curing Etc. Complete Complying With Standard Specification 6 Plain Cement Concrete 1:2:4 ( One Cement Two Sand And Ten Broken Machine Crushed Stone Jelly ) Using Hbg Machine Crushed Stone Jelly Of Size 20Mm Gauge For Founding And Basement Including De- Watering If Found Necessary And Laid In Layers Of Not More Than 15Cms Thick Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. 7 Supplying And Erecting Centering For Sides And Soffits Including Necessary Supports And Strutting Upto 3.29 M Height For Plane Surfaces As Detailed Below In All Floors With All Cross Bracings Using Mild Steel Sheets Of Size 90 X 60 Cm And 10 Bg Stiffened With Welded Mild Steel Angle Of Size 25Mm X 25Mm X 3 Mm For Boarding Laid Over Silver Oak Joists Of Size 10Cm X 6.50 Cm Spaced At Abote 90 Cm Centre To Centre And Supported By Casurina Props Of 10Cm To 13 Cm Dia Spaced At Not More Than 75 Cm Centre To Centre Etc. Complete Complying With The Standard Specificaiton. ( Payment For Centering Shall Be Given After The Concrete Is Laid ) 8 For Plane Surfaces Such As Rcc Floor Slab, Roof Slab, Beams, Lintels, Bed Blocks, Landing Slab, Waist Slab, Portico Slabs And Beams, Etc. 9 For Plane Surfaces Such As Vertical Slab, Side Slabs Of Boxing, Vertical Drops, Facia, Vertical Walls Etc. 10 Providing And Laying M 30 Design Mix For All Reinforced Cement Concrete With Minimum Cement Content Conform To Is 456-2000 Using Ordinary Portland Cement Of Grade 53 From Approved Manufacturer, Manufactured Sand, 20 Mm And Down Graded Size Coarse Aggregates, Necessary Approved Admixtures As Per Requirement. Works For Raft, Grade Beam, Shear Wall, Rcc Walls, Lift Walls, Plinth Beams, Column, Footings, Grade Slab, Roof Slab & Beam, Curved Slab, Beam, Column Drops, Pergola, Staircase Waist And Landing Slab Lintel, Sunshades, Parapet Cum Drops, Steps, Canopy, Window Boxing Slab, Loft, Fins Facia Planter Box Binders Basement Retaining Wall, Machine Foundation, Elevation Features And Other Similar Structures Etc..Excluding Necessary Centering, Shuttering And Reinforcement Which Shall Be Measured And Paid Separately Under Relevant Items.Rate To Include All Designing The Mix, Batching Plant, Mechanical Mixing, Transporting And Placing At All Levels, Leads, Lifts, Tools & Plants, Fuels, All Materials, Labour Charges, Wastages , Laying, Pumping The Concrete To All Levels, Providing Sleeves / Openings In Rcc Slabs, Compaction By Vibrator, Curing Etc. As Complete With All Respects Complying With Relevant Standard Specification, As Directed By The Engineer- In-Charge 11 Basement Concrete Work 12 Ground Floor Concrete Work 13 Providing Under Reamed Pilesr.C.C.38 Cm ( 15 ) Dia Cast-In-Situ With Single Reamed ( Bulb ) In Cement Concrete1:1.5:3, 11.5Cm Above G.L. Including Boring, Erecting, Vibrating, Curing, Hire Charges For Drilling Equipments, Etc., Complete As Per Relevent Isi Specifications ( Excluding Cost Steel Reinforcement ) . 14 Bored Pile 450 Mm Diaproviding And Installing Bored Cast-In-Situ Reinforced Cement Concrete Pile Ofspecified Diametre And Length Below Thepile Cap In Rmc M25 Concrete To Carry A Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including Bentonite Solution Machinery Charges Labour Chargres Etc., All Complete. ( Length Of Pile For Payment Shall Be Measured From Bottom Pile To The Bottom Of Pile Cap ) 15 Supplying, Fabricating And Placing In Position Mild Steel / Ribbed Tor Steel Grills For All Rcc Works As Per Design Given Including Cost Of Steel And G.I. Binding Wire In All Floors Etc. Complete Complying With Standard Specification. ( Contractor Has To Make His Own Arrangements For The Supply Of Steel And Binding Wire ) 16 Brick Masonry In Cement Mortar 1:5 ( One Cement And Five Sand ) In Foundations, Basement And Superstructure Walls Using Second Class Ground Moulded Chamber Burnt Bricks Of Size 9”X 43 / 8”X2 3 / 4” Etc., Complete Complying With Standard Specifications And Drawings And As Directed By Departmental Engineers 17 Basement Brick Work 18 Ground Floor Brick Work 19 Brick Partition Walls Of 11.50Cm Thickness Using Best Quality Ii Class Ground Chamber Burnt Bricks Of Size9 X 43 / 8 X 23 / 4 In Cement Mortar 1:3 ( One Cement And Three Sand ) Using Hoop Iron Reinforcement If Found Necessary Including Curing Etc. Complete And As Directed By The Departmental Officers. 20 Supplying And Filling Brick Bats Of Size Various From 20To40mm In Regular Layers Of 15Cm Thick Including Watering, Consolidating And Rolling With Hand Roller, Etc., Complete As Per Direction Of Engineer In Charge 21 Supplying And Filling In Foundation, Basement, Etc With Filling Gravel Inwellrammed And Consolidated Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. 22 Supplying And Stacking Of Red Earth At Site To The Departmental Guage For Premeasurements Which Is Of Light Textured, Crystalline, Porous And Firable And Not Of Generally Acidic Or Neutral But Not Of Alkaline And Should Not Of Alkaline And Shoulde Be Fertile. The Rate Including Seignior Age Charges, Cost Of Red Earth, Transportation, Loading & Unloading, Stacking Etc., Complete And As Directed By Engineer-In-Charge. 23 Special Ceiling Plastering And Finishing The Exposed Surface Of All Rcc Items Of Work Such As Slabs, Beams, Sunshades, Facia, Canopy Slab, Staircase Waist Slab, Landing Slab Etc., With Cement Mortar 1:3 ( One Cement And Three Sand ) 10Mm Thick Including Hacking The Surfaces, Providing Cement Mortar Nosing, Beading For Sunshades, Staircases, Steps, Landing Slabs And Curing, Etc., In All Floors Complying With Standard Specification And As Directed By The Departmental Officers 24 Plastering With Cement Mortar 1:5 ( One Cement And Five Sand ) , 12Mm Thick In All Floors Including Curing Etc. Complete Complying With Standard Specification And As Directed By The Departmental Officers. 25 Supplying And Painting Of2 Coats Of Weather Proof Exterior Emulsion With High Sheen, Anti Algal Properties Over One Coat Wall Exterior Primer Of Approved Quality And Shade Etc., Complete. The Rate Including Cost Of Materials, Brush, Ladder, Scrapping, Washing, Materials, Labour Charges, Wastages , Cleaning, Necessary Lead And Lifts, Scaffolding, Stagging, Working At All Levels, Elevations, Transportaion Charges, Loading, Unloading, Curing, Sanding, Touchup Putty, Surface Thoroughly Cleaned And Wetted Before Painting As Complete With All Respects Complying With Relevant Standard Specification And As Directed By The Engineer-In-Charge. 26 Providing Granolithic Floor Finish 25Mm Thick With Pcc 1:2:4 ( One Cement Two Sand And Four Aggregate ) Using 10 To 12Mm Thick Hgb Jelly And River Sand And Including Rubbing The Top Surface Smoothly Thread Lining If Found Necessary And Curing Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officer 27 Providing And Laying Granular Sub Base ( Gsb ) By Provided Coarse Graded Material Confirming To ( Table 400-1 ) Mixing In A Mechanical Mix Plant At Omc Carriage Of Mixed Material To Work Site Spreading In Uniform Layers With Motor Grader On Prepared Surface And Compacted With Vibratory Power Roller To Achieve The Desired Dry Density To The Required Grade And Cross Slope As Per Drawings All Others Incidental Charges Etc.Complete As Per Clause Of 401 Morth Specification 28 Structural Steel Works:Supplying Fabricating, Hoisting, Erecting And Fixing In Position Mild Steel Structural Steel Works Of Pergola, Gate For Compound Wall And Grill At All Elevations, Levels And Heights Including Aligning, Leveling, Providing And Fixing Bolts, Nuts, Washers, Comprising Ms Plates, Flats, Squares Etc., Of Various Sizes And Other Structural Steel Sectionsconforming To Latest Is2062 Grade - A&B Including Straightening, Cutting, Welding, Bending To Shape, Bolting And Inclusive Of The Following Finishes. The Rate Including Cost Of All Materials, Labour Chanrges, Scafolding, Stagging, Transportation, Lead & Lifts, Wastage, Etc., Complete With All Respects Complying With Relevant Standard Specification, As Directed By The Engineer-In-Charge. All Ms Members Shall Be Painted With One Coat Of Zinc Chromite Primer And 2 Coats Of 35 Microns Dft Of Synthetic Enamel Paint Of Approved Colour And Make Etc, .The Rate Includes The Cost Of All Materials, Labour, Tools, Tackle And Plants, Wastage Etc., As Per Specification And Drawings Complete. The Rate Quoted Is To Include Cost Of Bolts, Nuts, Washers, Welding, Electrodes And Connections Required For The Work. No Extra On This Account Will Be Paid For. The Rate To Include Preparation Of Fabrication Shop Drawings For OwnerS Approval: 29 Painting New Iron Works Such As Steel Doors, Windows, Ventilators, Window Bars, Balustrades Etc., With Two Coats Of Best Approved First Quality And Colour Of Synthetic Enamel Paint Over The Existing Red Oxide Priming Coat In All Floors Including Cost Of Priming Coat Etc., Complete Complying With Standard Specification. ( The Make Quality And Colour Of Paint Should Be Got Approved By The Executive Engineer Before Use On Works. ) 30 Manufacturing, Supplying And Fixing Of Stainless Steel Hand Rails For Staircase Using 50Mm Dia 304L Grade Stainless Steel Pipe Of 1.60Mm Thick At Required Locations To A Height Of 900Mm From Finished Floor Level Welded To 38Mm Dia Stainless Steel Pipe Post Of 1.00Mm Thick As Vertical At 900Mm Centre With 2 Nos. Of 25Mm Dia Intermediate Horizontal Stainless Steel Pipe Of 1.60Mm Thick In Between. The Vertical Pipe Has To Be Welded To The 100 X 100 X 6Mm Ms Base Plate Encased In The Base Concrete. The Rate Is Inclusive Of The Charges For Cutting, Bending, Welding, Grinding, Polishing, Conveyance, Electrical Charges, Etc. Complete 31 Solid Pvc Door Shutters Using 19 Gauge 19Mm Ms Square Tubes For Styles And Outer Frames. 15Mm Ms Square Tubes For Top, Lock And Bottom Rails. The Steeltubes Shall Be Covered With 5Mm Thick Solid Pvc Sheets. Shutter Using 5Mm Thick Solid Pvc Sheets For Panelling Shall Rigidly Fixed In Position Including Necessary Furniture And Fittings. The Over All Size Of Styles Shall Be 50Mm X 30Mm. The Over All Size Of Top Rail, Lock Rail And Bottom Rail Shall Be 75Mm X 30Mm. The Over All Size Of Frames Shall Be 50Mm X 45Mm With Suitable Rabate For Housing The Shutte 32 Providingcountry Wood Wrought And Put Up Frame For Door And Window Any Other Similar Joinery Works Using Following Size Of Upto 4M In Length Country Wood Scantling Of Pillai Maruthu Or Patak Including Labour For Wrought And Putup In Position Etc., Complete Complying With Standard Specification.. 33 Frp Door Suitably Reinforced Using Ms Angle / Flats, Cost Of Holdfasts And Solid Core Frp Shutter Panel Of 5Mm Thick And Hollow Core Frames Of 3M Wall Thickness For Styles And Rails Etc., Of Sizes Specified By Engineers 34 Upvc Windowspecification:Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Windows Of Casement Type ( Open ) From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Are Reinforcement With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profiles Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With Over All The Edges Of Frame And Shutter The Shutter Will Be Provided With Espag Multi Power Point Locks And Also It Operates As Handle. The Corners And Joints Should Be Welded And Cleaned. Radiations Free Pin Headed Plain Or Brown Colour Glass 4Mm Thick Should Be Provided To The Shutter And It Should Not Allow Leakage Of Water Even At Most Ranging Storms And Should Have Key Lockable Action, Security Protective Hinges, Strong Locking Systems And As Per Size For Arresting Noise And Energy Loss. The Connecting Mechanism Between Sash And Outer Frame That Enables Opening Of The Window. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Window Should Be Got Approved From The Executive Engineer Before Use On Work 35 Upvc Ventilatorspecification:Supplying And Fixing Upvc ( Un-Plasticized Polyvinyl Chloride ) Louvered Ventilators Of From The Profile The Size Of Outer Frame 60Mm X 58Mm And Shutter Profile Size Of 60 X 78Mm Both Profiles Are Reinforced With Gi / 1Mm 125Gsm And 100% Corrosion Free, The Profile Are Multi Chambered Sections With Wall Thick Of 2Mm. The Epdm Rubber ( Black Colour ) Covered With All Over The Edges Of Frame And Shutter. The Corners And Joints Should Be Welded And Cleaned. Radiations Pin Headed Glass 4Mm Thick Should Be Provided In The Louvers. The Window Should Be Fixed To The Wall With 100% Packing With Screws And Silicon Packing All Round The Frames. The Ventilator Should Be Got Approved From The Executive Engineer Before Use On Work 36 Weathering Course In Brick Jelly Lime Concrete Using Broken Brick Jelly Of Size 20Mm Uniform Gauge In Pure Slaked Lime ( No Sand To Be Used ) To The Proportion Of Brick Jelly To Lime Being 32:12.5 By Volume And Laid Over The Rcc Roof Slab In A Single Layer Of Required Slope And Finished By Beating The Concrete With Wooden Beaters Of Approved Pattern, Keeping The Surface Constantly Wet By Sprinkling Lime Jaggery Water, Etc., Complete As Per Standard Specification And As Directed By The Deparmental Officers. 37 Finishing The Top Of Roof With One Course Of Machine Pressed Tiles Of Size 230Mm X 230Mm X 20Mm Of Approved Quality Set In Cement Mortar 1:3 ( One Cement And Three Sand ) 12Mm Thick Mixed With Water Proofing Compound Conforming To Iss At 2% By Weight Of Cement Used And The Joints Pointed Neatly To Full Depth Of Tiles With The Same Cement Mortar Mixed With Red Oxide And Water Proofing Compound Including Curing Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers 38 Flooring With Followingdesigned Antiskid Ceramic Tiles Of Size 305 X 305 X 6 Mm Laid Over 20 Mm Thick Cement Mortar 1:3 ( One Cement And Three Sand ) Base Mortar Over The Existing Slab / Floor Including Cutting The Tiles To The Required Size With Special Cutter Wherever Necessary, Laying In Position And Pointing With White Cement Mixed With Colouring Pigment At The Rate Of 0.3 Kg. / Sq.M. Etc., Complete Complying With Standard Specification. ( The Make And Brand Of The Tiles Should Be Got Approved By Executive Engineer Before Use On Works ) 39 Dadooing Walls With Following Best Approved Quality, Designed Colour Ceramic Tilesof Following Sizes Set In Cement Mortar 1:2 ( One Cement And Two Sand ) 10Mm Thick And Pointing The Joints With White Cement Mixed With Colouring Pigments At The Rate Of 0.40 Kg. / Sq.M. Neatly In All Floors, Curing, Etc., Complying With Standard Specification And As Directed By The Departmental Officers. 40 Supplying And Laying Interlocking Rubber Moulded Paver 83Mm Thk Of Approved Sample As Per Design / Drawing Made Of M40 Concrete- 83 Mm Thick Includingtransportation Of The Blocks To The Site Preparation Of Surface Including Supplying And Filling With Manufactured Sand To 50 Mm Thick, Levelling And Compacting With Plate Vibrator And Laying Of The Inter Locking Paving Blocks With Sand Binding And Final Compaction With Plate Vibrator Of 3 Tonne Capacity Finishing The Surface Including Cutting Of Blocks At The Edges Including All Labour, Materials, Transportation, Shifting Etc., Complete, As Directed By The Engineer-In-Charge 41 Supplying And Layingmanhole Cover Sfrc With Size Of 750Mm X 750Mm Including All Labour, Materials, Transportation, Shifting Etc., Complete, As Directed By The Engineer-In-Charge 42 Supplying And Laying Pvc Mould Ci Steps For Sumpincluding All Labour, Materials, Transportation, Shifting Etc., Complete, As Directed By The Engineer-In-Charge 43 Supplying And Fixing Colour Metal Roofing Sheets Made Up Of Galvalumed AluminumZinc Alloy Coated Steel, Az-150 And HiTensile Grade 550 Steel Of Thickness 0.47Mm, Trapezoidal Profile Over All Width 1080 Mm Etc As Per Direction Of Engineer In Charge 44 Supplying And Fixingweld Mesh Of Size 7.5X2.5Cm 10 Gaugeincluding All Labour, Materials, Transportation, Shifting, Welding Chargesetc., Complete, As Directed By The Engineer-In-Charge 45 Providing And Fixing 18Mm Thick Machine Cut, Mirrorpolished, Premoulded And Pre-Polished Machine Cut Granite For Platforms, Seating Top Finished Copping, Etc., Of Approved Qualityfor Wash Basin / Vanity Counters, Pantry Etc.Of Required Size Of Approved Shade, Colour, And Texture Laid 20Mm Thick Base Cement Mortar 1:4 ( 1 Cement:4 M Sand ) With Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Machine Polishing To Edge To Give High Gloss Finish, Providing Machine Cut Opening For Fixing Wash Basin, Rubbing, Curing, Moulding & Nosing Etc. Complete At All Levels As Directed By Engineer-In-Charge. 46 Plumbing 47 Supplying And Fixing In Position Best Approved Of Bis Quality Pvc Rain Water Down Fall Pipes Having A Pressure Of 4 Kg. / Sq.Cm Including Cost Of Necessry Pvc Shoe, Pvc Bend, Cast Iron Gratings Of Required Diameter And Special Clamps, Brass Screws, Nails, Etc., And Fixing Of Cast Iron Gratings At Junction Of Parapet And The Rcc Roof Slab Including Finishing Neatly Etc., Complete. The Rate Shall Be Inclusive Of Cast Of Removable Cast Iron Grating. The Pvc Pipe Shall Be Fixed In Wall With Special Type Of U Clamp At The Centre Of The Pipe Line In Addition To Those For More Than 3.0 Metre Pipe Length, Etc., Complete Complying With Standard Specification. 48 Supplying And Fixing In Position Best Quality Pvc Soil / Waste Pipes Of Various Dia Having 6 Kg / Sq.Cm. Pressure Bis Mark And Providing Leak Proof Joints Using Pvc Adhesives Including Fixing To The Wall With Special Pvc / Ms Clamp, Teak Wood Plugs, Brass Screws, Etc., And Making Connection To All Sanitary Fittings, Dismantling Masonry / Rcc Works Wherever Found Necessary And Making The Good Dismantled Portion To The Original Condition, Including Testing For Any Leakages, Etc., Complete Complying With Standard Specifications. ( The Pvc Pipes Should Be Got Approved By The Executive Engineer Before Use On Works ) . The Rate For Earth Work Excavation Will Be Measured And Paid Separately In The Cases Where The Pipe Lines Are Proposed To Laid Below Ground Level 49 Supply And Delivery And Fixing Of Hdpe Tankincluding Loading, Unloading, Transportation And Labour Charges For Fixing Of The Pipes And Specials For Pipe Connection Works Including Cutting, Threading And Fixing Charges Etc., 50 Supplying And Fixing In Position First Quality And Approved Variety Of Gun Metal Gate Valve / Wheel Valve With Bis Make Of The Following Dia Including Cost Of Shellac, Thread Balls, Etc., Complete Complying With Standard Specifications ( For Both Internal And External Water Supply Arrangements ) .The Valves To Be Used On Work Shall Be Got Approved By The Executive Engineer Before Use On Work. 51 32Mm Gun Metal Gate Valve 52 40Mm Gun Metal Gate Valve 53 Supplying And Fixing In Position 15Mm Dia Brass Long Body Tap ( Heavy Duty ) Of Approved Make Conforming To Bis Specifications And Quality Including Cost Of Shellac, Thread, Etc., Complete Complying With Standard Specification And Including Cutting And Threading Wherever Necessary. ( Taps Should Be Got Approved By The Executive Engineer Before Use On The Works ) 54 Sd Tap 55 Pillar Tap 56 Supply Andlaying And Jointingupvc Pipe ( Un-Plasticized Polyvinyl Chloride ) Upvc Used For Commercial Applications Operate And Designed To Handle Higher Water Pressure ( Schedule-80 ) Including Cost Of Such Specials And Fixing In Position Dismantling Masonry And Make The Same To Original Conditionetc Complete Complying With Standard Specification And As Directed By The Departmental Officers At Site Of Work. 57 25Mm Dia 58 32Mm Dia 59 Supplying And Fixing In Position Best Quality And Approved Make Indian Made White / Colour Glazed Earthernware Wash Hand Basin Of Size 550 X 400Mm ( With Pedestal / Without Pedestal ) With A Pair Of Cast Iron Brackets, Including Cost 15Mm Dia Brass Cp Pillar Tap, 32Mm Dia B Class Gi Waste Pipe With Rubber Plug And Chain, 15Mm Dia Gm Wheel Valve, 15Mm Brass Nipple, 15Mm Dia Nylone Connection, 32Mm Dia Cp Brass Waste Coupling Including Fixing Of Wash Basin Using Ci Brackets On To The Wall In Position With Tw Plugs And Screws, Rubber Washers, White Lead And Giving Necessary Water Supply Connection And Painting The Brackets With Two Coat Of Painting Over A Priming Coat Of Anti-Corrosive Paint Including Testing For Leakages Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. ( The Wash Hand Basin And Specials Should Be Got Approved By The Executive Engineer Before Use On Works ) . 60 Supplying And Fixing In Position Cp Shower Rose With Cp Stop Cock Arrangement Of Size 15Mm Dia Inlet And 100Mm Outlet To The Pipe Line With Necessary Cutting, Threading And Jointing Using Shellac Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers ( The Cp Shower Rose Should Be Got Approved By The Executive Engineer Before Use On Works ) . 61 Supplying And Fixing In Position Indian Make Bevelled Edge Mirror Of Approved Quality And Brand Pvc / Fibre Glass Framed 600 X 450 X 5.5Mm Thick Mirror, Shelf Type With Hard Board Backing Of Approved Colour Fixed With Brass Screws, Rawl Plug, Etc., Complete Complying With Standard Specification. ( The Mirror Should Be Got Approved By The Executive Engineer Before Use On Woks ) 62 Supplying And Fixing In Position White / Glazed European Water Closet Of Best Quality And Approved Make With 100 Mm P Or S Trap Connecting With Ci Pipe Of 100Mm Dia / Pvc Pipe Of 110Mm Dia, Double Flapped Rigid Pvc Black Seat And Seat Cover With Cp Brass Hinges Including Cost Of White Cement, Cement For Packing, Spun Yarn, Teak Wood Plugs, Brass Screws, Etc., Including Supplying And Fixing 10 Litres Capacity Pvc Porcelin Low Level Flushing Tank With A Pair Of Ci Brackets, Etc., Complete With All Fittings Such As 15Mm Brass Ball Valve With Polythene Float With Brass Handle, Union, Coupling Connected By Means Of 40Mm White Pvc Flush Hand Using Indian Adopter Joint Including All Internal Fittings..... Such As 15Mm Brass Connections, 15Mm Gm Wheel Valve, 15Mm Brass Nipple ( 2 Nos. ) , 15Mm Nylon Connection, Tw Plugs, Screws And Also Giving Necessary Connection To The Pvc Pipe Including Cost Of 600Mm Length Of 110Mm Dia Pvc Pipe And Painting The Ci Brackets With 2 Coats Of Approved Paint Over One Coat Of Red Oxide Primer, Dismantling The Masonry And Re-Doing The Dismantled Masonry To Original Condition Etc. Complete Complying With Standard Specifications. ( The Ewc And Flushing Tank Wiht All Accessories Should Be Got Approved By The Executive Enginer Before Use On Works ) 63 Supplying And Fixing Position Ci Nahani Trap / Floor Trap Of The Following Sizes With Best Stainless Steel Gratings Of Approved Brand And Quality, Fixed Over A Bed Of Brick Jelly Lime Concrete 1:2:5 ( One Part Of Lime, Two Part Of Sand And Five Part Of 40Mm Gauge Brick Jelly ) And Finished With Cement Mortar 1:3 ( One Cement, Three Sand ) Including Dismantling Masonry Works Wherever Found Necessary And Making Good The Dismantled Portions To The Original Condition And Giving Connection To The Ci / Pvc Pipes, Etc., Complete Complying With Standard Specification. ( The Nahani Trap Should Be Got Approved By The Executive Engineer Before Use On Works ) 64 Supply And Fixing In Position Of Best Indian Make White / Colour Glazed Earthernware Lipped Mouth Flat Back Urinal Of Best Quality And Approved Make Of Size 430Mm X 260Mm X 350Mm With Gi Pipe, 32Mm Dia Bell Mouth Pvc Connection And Waste Pipe, 15Mm Dia Gi Pipe Of Required Length, 15Mm Dia Gm Wheel Valve, 15Mm Dia Brass Nipple 2 Nos., And Fixing The Urinals In Position With Necessary Tw Plugs, Clamps, Screws, Etc., Including Dismantling Masnory And Re-Doing The Same To The Original Condition, Etc., Including Painting The Pipe With Two Coats Of Best Quality Approved Synthetic Enamel Paint Over One Coat Of Red Oxide Primer And Checked Without Any Leakage Etc. Complete Complying With Standard Specifications And As Directed By The Departmental Officers. ( The Urinal Should Be Got Approved By The Executive Engineer Before Use On Works. ) 65 Bore Well 66 Drilling Bore Well Anywhere In Chennai City Including Transportation From One Place To Another Place Within Alluvial Soil Or Sedimentary Rock Clay And Sand Or Stone Pebbles, Boulders Etc., By First Taking A Pilot Bore Of 140Mm / 150Mm / 200Mm And The Enlarging To Required Depth Direct Or Reverse Rig Fuel, Drilling The Betonite Mud And Water Required For Drilling By Departmental Officers Including Construction Of Mud Pts. ( Water Available With A Lead Of 1.50Km ) 67 300Mm 68 150Mm 69 Reaming From 200Mm Pilot Bore To 300Mm Dia Bore Upto 60M Depth Ending Below Ground Level And As Directed By The Departmental Officers. 70 Supply And Laying Following Dia Pvc Casing Pipe With Excise Duty As Per Is 12818 / 1992 71 200Mm Dia Cs ( Plain Pipe ) 72 200Mm Dia Rs 73 150Mm Dia Rs 74 Labour Charges For Inserting Pvc Casing Pipes Assembly ( With Slots Or Without Slots ) In The Drilled Hole Including Jointing The Pipes With Pvc Couplers With Cement Paste Etc., Complete, Supply And Packing The Annular Space With Pebbles Of Size And Quality As Approved By The Executive Engineer Of Departmental Officers. 75 200Mm Dia Cs ( Plain Pipe ) 76 200Mm Dia Rs 77 150Mm Dia Rs 78 Supplying And Filling With River Pebbles In Annular Space Between Bore And Pvc Pipe Up To Hard Rock. 79 Charges For Developing The Borewell With Air Compressor Of 300 Cfm Capacity ( Minimum 8 Hours ) Including Transportation Labour And Fuel Charges For Compressor As Directed By Twad Board Officers And Conducting Yield Test By V Notch Method. 80 Supplyand Erection Of 2.Hp Submersible Pump Set Using Nylon Rope Including Cost Of Motor , Fixing Necessary Cable Charges And Labour Charges Etc., Complete ( For Sump & Bore Well ) 81 Supplying And Fixing In Position Best Quality Of Hdpe Pipes With Isi Mark Of Following Dia With Specials Including Cost And Coveyance Of Hdpe Pipes And Specials, Labour Charges For Erection Of Pipes In The Borewell And Jointing Materials Etc., All Complete As Directed By The Departmental Officers. 82 Dismantling Removing Reinforced Cement Concrete Work And Etc., By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50M Lead As Per Direction Of Engineer In Charge 83 Conveyance Of Earth / Debris To A Lead Of Within 30 Km From Site As Directed By The Engineer Inculding Loading, Unloading, Hire Charges For Vehicle And Other Incidental Charges Etc., All Complete As Directed Bythe Departmental Officers. 84 Supplying And Erecting In Position Of Following Liters Capacity Industrial Model Reverse Osmosis Water-Cum-Purifier To Deliver Potable Water With World Health Organisation ( Who ) Standards With Following Accessories. ( A ) Ms Skid - 1 No. ( B ) Media 11054 No. Vessel With 20 Nb Multiport Valve ( With Media Pubble And Fine Sand And Activated Carbon Filling ) Set ( C ) Feed Pump 0.50 Hp – 1 No. ( D ) Vertical Pump 2-9, 2.00 Hp / Single Phase – 1 No. ( E ) Membrane 40 X 40 Filmtech ( Or ) Equilaents / Osmonic ( Usa ) - 1 No. And Membrane Pressure Vessel 40 X 40 -1 No. & Pressure Gauge - 2 Nos. ( F ) Flow Meter - 1 No. 20” Filter With Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary Cpvc Pipes And Fittings. The System Shall Be Provide With Two Panel Control System With Necessary Stainless Valves And Fittings And Float Control Etc. The Rate Should Be Inclusive Of All Civil Works, Wherever Necessary To Install The System In Position And Intact. - 50 Litres 85 Supply And Fixing Of Water Co2 Stored Pressure Type 9 Litres Capacity Fire Extinguisher As Per New Is 15683 Complete With Control Valve, Gun Metal Cap, Pressure Gauge, Operation Sticker, Discharge Hose, Wall Mounting Bracket, Safety Clip, Etc., As Directed By The Departmental Officers. 86 Supplying And Planting Of Black Eyed Susanvariety Of Height 6 In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 87 Supplying And Planting Of Thornless Velvet - Rose Variety Of Height 1 In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 88 Supplying And Planting Oflilium Longiflorum Variety Of Height 1 In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 89 Supplying And Planting Of Quisqualis Indica Variety Of Height 13In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 90 Supplying And Planting Of Bougainvillea Variety Of Height 16In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 91 Supplying And Planting Of Hydrangea Macrophylla Variety Of Height 9In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 92 Supplying And Planting Of Vinca Minor Variety Of Height 3In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 93 Supplying And Planting Of Acalypha Variety Of Height 1In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 94 Supplying And Planting Of Canna Indica Varigatedvariety Of Height 14In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 95 Supplying And Planting Of Coleus Plant Ornamentalvariety Of Height 1In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 96 Supplying And Planting Of Cypress Tree Variety Of Height 6 In Polythene Bag Of Dia 30Cm Including Supporting Stack Of 5 Cm Diacasurina Pole Of 10 Feet Height, Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 97 Supplying And Planting Of Dypsis Lutescenstree Variety Of Height 8-10 In Polythene Bag Of Dia 30Cm Including Supporting Stack Of 5 Cm Diacasurina Pole Of 10 Feet Height, Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 98 Supplying And Planting Of Plumeira Albatree Variety Of Height 8-10 In Polythene Bag Of Dia 30Cm Including Supporting Stack Of 5 Cm Diacasurina Pole Of 10 Feet Height, Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 99 Supplying And Planting Of Polyalthia Longifolia Tree Variety Of Height 8 In Polythene Bag Of Dia 30Cm Including Supporting Stack Of 5 Cm Diacasurina Pole Of 10 Feet Height, Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 100 Supplying And Planting Of Neem Treevariety Of Height 8 In Polythene Bag Of Dia 30Cm Including Supporting Stack Of 5 Cm Diacasurina Pole Of 10 Feet Height, Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 101 Supplying And Planting Of Coccoloba Uniferatreevariety Of Height 810 In Polythene Bag Of Dia 30Cm Including Supporting Stack Of 5 Cm Diacasurina Pole Of 10 Feet Height, Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 102 Supplying And Planting Of Mimusops Elengitreevariety Of Height 810 In Polythene Bag Of Dia 30Cm Including Supporting Stack Of 5 Cm Diacasurina Pole Of 10 Feet Height, Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 103 Supplying And Planting Of Moringa Oleifratreevariety Of Height 3 In Polythene Bag Of Dia 30Cm Including Supporting Stack Of 5 Cm Diacasurina Pole Of 5 Feet Height, Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Requiredsize, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 104 Supplying And Planting Of Tabernaemontana Divaricatavariety Of Height 16In Polythene Bag Of Dia 30Cm Including , Including Loading And Unloading Charges, Transportation, Stacking Of Saplings At Site, Earth Work Excavation Of Required Size, Planting Of Sapling, Refilling Of Excavated Earth Etc As Directed By The Site In-Charge 105 Irrigation Work 106 Supply, Fixing & Commissioning Of Pop Up Spray Head Robust Design 1804 Seal A Matic ( Sam ) Pressure Regulating Series Spray Bodies, With Rotary Nozzle With Capable Of Covering 4.0-7.3M At 1.4 - 3.8 Bars Pressure, Rotary Nozzles Shall Have Hand Adjustable ( Without Tools ) Radius And Arc-45 To 270 Degree Or Full Circle True Flushing Mechanism, Thick Streams Andlarge Water Droplet & Low Precipitation Rate. Triple Blade Wiper Seal Precisely Balances Flushing, Flow-By And Debris Rotection To Optimize Performance And Durability At Pop- Up And Retraction. Precision-Controlled Flushing At Pop-Up And Retraction Clears Debris, Ensuring Positive Stem Retraction In All Soil Types. Unique Debris Pockets Hold Grit In Place, Removing It From Circulation And Preventing Long-Term Damage. Parts Resistant To Corrosion In Treated Recycled Water Containing Chlorine. Pop Spray Body Shall With Stand Upto 6.9 Bar. Built-In Seal-A-Matic™ ( Sam ) Check Valve. Traps Water In Lateral Pipes In Elevation Changes Of Up To 14 Feet ( 4.2 Have A Double Lacquering Made Out Of Highly Concentrated Fluomax Pvdf On Both Side, Double Pvc Coating And Be Weldable Without Grinding To Make Sure The Fabric Have Less Environmental Impact The Fabricator Has To Deliver Evidence Of R Park 107 Supply, Fixing & Commissioning Of 5004 Plus Sam Prs Series Rotor Pop Up Sprinkler Full / Part Circle Having Radius Of 6.7M - 12M @ 2.5 - 4.5 Bar With Discharge Of 0.09 - 0.61 Ltr. / Sec. The Sprinklers Having Arc Adjust Thru Top Cover W / Std. Screwdriver The Sprinkler Is Gear Driven Rotary Type With Having 3 / 4 Bottom Inlet. Oversized Wiper Seal, Rain Curtain Technology, Gentle Closein Watering And Self-Flushing Arc Adjustment Port And Also Having Tapered Riser Stem With Wiper Seal The Sprinkler Shall Have Plus ( Pressure Loss ) Flow Shut Off, 45 Psi Pressure Regulator With Flow Optimizer Technology, Internal Seal - A - Matic Device Which Prevents Low Head Drainage ( Upto 3.1M ) & Hence Puddling & Erosion. The Body Of Sprinkler Is Of Non - Corrodible, Heavy Duty, Anti Breaking System Plastic. O-Ring Slip Clutch, Racheting Slip Clutch, Side Inlet Available 6 And 12, Turret-Mounted Internal Dia Plugs, Flow Stop Available, Non-Potable Water Indication Available Etc., Complete Including Installation Charges. ( Rain Bird, Toro, K-Rain Or Equivalent Brand ) Park 108 Supply Of 3 / 4 Pop Up Connecting Swing Joint Assembly. The Tubing Shall Beof Polyetylene Having Wall Thickness Of 2.3Mm, A Working Pressure Of 5.5 Kg / Cm2 At 430 C And A Surge Pressure Of 16.6 Kg / Cm2. The Fittings Shall Be Made Of Uv Resistant Thermo Plastic.Sa Series Including Installation Charges. - Pd-1585 109 Supply Of 3.0 Twin Disc Filter 50 M³ / Hr. Including Installation Charges. ( Brands Like Rain Bird Or Equivalent ) - Pd-1587 110 Flexible Polyethelene Irrigation Pipe 16 Mm Dia / 2.5 / 1.1 - 1.4 Mm Cl - Ii. Including Installation Charges. Netafim Or Equivalent Brands. Pd-1589 111 Supply Of Pressure Compensated Dripper With 2 / 4 / 8 Lph Outlet Flow Including Installation Charges. Rain Bird / Netafim Makeor Equivalent Make. Pd-1591 112 Supply Of Endcap, Nipple, Start Nipple, Rubber Grommet 16 Mm Dia. Including Installation Charges. Netafim Or Equivalent Brands. Pd-1590 113 Supply, Installation, Testing And Commissioning Of Sperinkler System With 2 Hp, 230V Motor With 380 Lpm, 2.80 Kg / Cm2 Pressure, With A Head Range Of 22-30 Meter, Suitable To Support Sprinkler And Dripper, Including Installation All Inclusive. 114 Supply, Fixing & Commissioning Of A Double Acting Airand Vaccum Release 2 Air Release Valve . The Air Release Valve Shall Be Capable Of Both Releasing And Admitting Air From And Into The Line. The Working Pressure Shall Be 10 Ksc Etc., Complete, The Rate Including Cost Of All Materials, Labour Charges, Transportaion Charges Etc., Complete Complying With Standard Specifications As Per The Direction Of Departmental Engineer-In-Charge. 115 Children Play Equipment 116 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Puppy Dog Rider With A Size Of 0.9 M X 0.40 M X 0.76 M Comply With En 1176 Safety Standards. The En 1176 Certificates Issued By An International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Etc. Specialized Connectors Such As Clamps And Couplings Are To Be Cast From Aluminium Which Is Pre-Treated, And Cured, With A Baked On Powder Coat Finish. The Rider Is Of Size 0.9 M X 0.4 M X 0.55 M, Bolts, Nuts, Screws, Washers And Etc., Used For Assembly Shall Be Stainless Steel 304 Grade And Shall Be Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As A Safety Feature. All Joints Are Robotic Welded Including All Civil Works As Required Complete 117 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Elephant Rider With A Size Of 0.9 M X 0.40 M X 0.76 Mcomply With En 1176 Safety Standards. The En 1176 Certificates Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only. Specialized Connectors Such As Clamps And Couplings Are To Be Cast From Aluminium Which Is Pre-Treated, And Cured, With A Baked On Powder Coat Finish. The Rider Is Of Size 0.9 M X 0.4 M X 0.55 M. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Grade And Shall Be Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As A Safety. All Joints Are Robotic Welded Including All Civil Works As Required Complete 118 Supply And Fixing Of Arch Sea Saw Sea Saw Made Of G.I.Sheets With 2 Stainless Steel Pipes Boards To Play 4 C Hildren Simultaneously. Seats Made Of Fiber Reinforced Plastic. 119 Design, Manufacture, Supply, Erection And Testing And Commissioning Ofpod Swingwith A Size Of 2.83 M X 1.30 M X 2.50 M Comply With En 1176 Safety Standards. The En 1176 Certificates Issued By An International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Etc.All Products Must Be Tested And Certified To Meet En 1176 Safety Standards. The En 1176 Certificates Must Be Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only. An Inverted ‘U’ Shaped Structural Posts Of Height 2.50 M Are To Be Schedule Hot Dip Galvanized Steel With A 114Mm Od And 2.2Mm ( Wall ) Thickness Of The Tubing. The Poles Are Welded On To A Base Plate Made From Steel With 114Mm Inner Diameter. At Top A Metal Sheet Is Provided Which Shall Be An All-Robotic Welded Unit, Fabricated Fromgalvanized Steel Pipes. Swing Seats Are All Robotic Welded Fabricated The Electro- Statically Applied Polyester Powder Has A Tough Finish With Maximum Durability. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As Per En1176 Standards. All Joints Are Robotic Weldedincluding All Civil Works As Required Complete. 120 Supply And Fixing Of See Saw 4 Seater Withfiber Reinforced Plastic Of Width 7Ft 0” And Supporting Frame Made Of 40Mm Stainless Steel Pipes And Swinging Arm Made Of 50Mm Stainless Steel Pipes Of Length 8Ft 0”.Handle Made Of 19Mm Stainless Steel Pipes Seats Are Fiber Reinforced Plastic Etc. Including All Civil Works As Required Complete. 121 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Multi Play System ( Kpsnk 005 ) With A Size Of735 X 735 Mm Comply With En 1176 Safety Standards. The En 1176 Certificates Issued By An International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Etc. The New Hdpe Play Panels Include Different Games, Each With Their Own Unique Hdpe Panel Design. All Panels Are Available In Other Colours Or Languages On Request. The Mounting Holes Must Be Drilled On Installation. 3 In A Row- Form Three Discs Of Your Colour In A Row In This Classic Game For Two .Unique Hdpe Panel Design. Solid Hdpe Material - Thickness 19 Mm. Available In Other Colours / Languages On Request. Mounting Holes To Be Drilled Depending On Installation. All Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En1176 Safety Standards Including All Civil Works As Required Complete. 122 Supply And Fixing Of Merry Go Round – 6 Seater ( Frp ) Height :3” Gi Pipe, 2.5Mm Thick, B Class Seat Size:15” X 14”, Paint: Pu Coating. 123 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Multy Play System Type 1 ( Kpsnk 008 ) With A Size Of980 X 735 Mm Comply With En 1176 Safety Standards. The En 1176 Certificates Issued By An International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Etc. The New Hdpe Play Panels Include Different Games, Each With Their Own Unique Hdpe Panel Design. All Panels Are Available In Other Colours Or Languages On Request. The Mounting Holes Must Be Drilled On Installation. Race Your Sliding Disc As Quick As Possible From Start To Finish. Unique Hdpe Panel Design. Solid Hdpe Material - Thickness 19 Mm. Available In Other Colours / Languages On Request. Available In Other Colours / Languages On Request. All Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En1176 Safety Standards Including All Civil Works As Required Complete. 124 Supply And Fixing Of Duck Merry Go Round: [ Measurement ] Height:2Ft Width:7Ft [ Component ] Leg :3” Galvanished ‘B’ Class Pipe Seat :Frp Duck -4Nos. With Isotolic Gel Coat With Uv Pigment.Support : 1 ½” Galvanished ‘B’ Class Pipe. Painting With Pu Coating [ Wanted Area ] Product Area : Ø 7’Ft Play Area : Ø 9’Ft 125 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Triangle Rope Climber With A Size Of 2.33 M X 1.5 M X 1.5 M Comply With En 1176 Safety Standards. The En 1176 Certificates Issued By An International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Etc. Support Posts Of Height 2.1 M Are To Be Schedule Galvanized Steel With A 89 Mm Od { Outer Diameter } . Specialized Connectors Such As Clamps And Couplings Are To Be Cast From Aluminium Which Is Pre-Treated, And Cured, With A Baked On Powder Coat Finish. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Grade And Shall Be Oftamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As A Safety. All Joints Are Robotic Welded Including All Civil Works As Required Complete. 126 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Hexa Climber With A Size Of 2.2 M X 2.1 M X 2.3 M Comply With En 1176 Safety Standards. The En 1176 Certificates Issued By An International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Etc. These En 1176 Certificates Must Be Clearly Displayed On The Notified Certifying Bodies Websites As Online Verification Is Mandatory. Upright Structural Posts Of Height 2.3 M, Are To Be Schedule Galvanized Steel With A 114Mm Od { Outer Diameter } . Parallel Climber Of Size 1.9 M X 1.17 M , Horizontal Ladder 1.9 M X 1.17 M , Pull Up Bar, Chain Climber Of Size 1.9 M X 1.17 M, And Gymnastic Rings Of Size 0.77 M X 1.17 M Shall Be An All Patent Welded Fabricated From 54 Mm O.D. Galvanized Steel Pipes. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Grade And Shall Be Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As A Safety. All Joints Are Robotic Welded Including All Civil Works As Required Complete. 127 Design, Manufacture, Supply, Erection And Testing And Commissioning Ofcrawl Tunnel With A Size Of 1.94 M X 1.54 M X 1.3Mcomply With En 1176 Safety Standards. The En 1176 Certificates Issued By An International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Etc. Upright Structural Posts Of Height 1.3 M Are To Be Schedule Galvanized Steel With A 114Mm Od { Outer Diameter } . The Tunnel Of Size 1.94 M And Dia 900 Mm. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Grade And Shall Be Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As A Safety. All Joints Are Robotic Welded Including All Civil Works As Required Complete. 128 Design, Manufacture, Supply, Erection And Testing And Commissioning Oftoddler Multi Play System Type 2 With A Size Of4.10 M X 2.30 M X 2.60 M Comply With En 1176 Safety Standards. The En 1176 Certificates Issued By An International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Etc. With Upright Structural Posts Of Height 2.0 M, Are To Be Schedule Galvanized Steel With A 114Mm Od { Outer Diameter } . Deck Of Size 0.80 M X 0.80 M And Staircase Of Size 0.91 M X 0.39 M Shall Be An All-Robotic Welded Assembly Fabricated From Perforated Solid Punched Steel. Deck Perimeter Is Precision Pre Punched For Attachments. Decks Are Pre Pressed, Punched, And Welded, Powder Coated To 2.2Mm Thickness Or Vinyl Plastic Coated To A Thickness Of 4Mm. Handrail Of Height 1.5 M And Dia 32 Mm Shall Be An All-Robotic Welded Unit, Fabricated From 32 O.D. Galvanized Steel Pipes. Frisby Climber, Piped Walls Of Size 1.52 M Shall Be An All Robotic Welded Fabricated From 32 O.D. Galvanized Steel Pipes For The Outer Pipes And 25Mm O.D. Galvanized Steel For The Inner Parallel Bars. Roof Of Size 1.17 M X 1.17 M X 0.85 M Straight Slide Of Size 1.46 M X 0.45 M X 0.95 M. A Shaped Swing Of Size 1.73 M X 1.24 M Shall Be Fabricated From 32Mm O.D. Galvanized Steel Pipe. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Grade And Shall Be Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As A Safety. All Joints Are Robotic Welded Including All Civil Works As Required Complete. 129 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Customized Adventure System Hps-2 With A Size Of10 M X 8.56 M X 4.2 M Comply With En 1176 Safety Standards. The En 1176 Certificates Issued By An International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Etc.Curved Structural Poles Of Height 2.6 Are To Be Schedule Galvanized Steel With A 114Mm Od { Outer Diameter } . Handrails Of Dia 60 Shall Be An All-Patent Welded Unit, Fabricated From 32 O.D. Galvanized Steel Pipes. Wiggle Triangle Crawl Of Size 1.08 M X 0.13 M ( Single Triangle ) , Stepping Stones Of Dia 0.32 M ( Single Stone ) , Elliptical Shaped Climber Of Size 2.12 M X 0.64 M, Plastic Components, Net Climbers Shall Be An All Patent Welded Fabricated From 32 O.D. Galvanized Steel Pipes For The Outer Pipes And 25Mm O.D. Galvanized Steel For The Inner Parallel Bars. Slide Of Size 2.77 M X 0.46 M X 1.21 M. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Grade And Shall Be Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As A Safety. All Joints Are Robotics Welded Including All Civil Works As Required Complete. 130 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Multiplay System Type 3 With A Size Of 10.04 M X 6.19 M X 4.2 M Comply With En 1176 Safety Standards. The En 1176 Certificates Issued By An International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Etc. Upright Structural Posts Of Height 2.3 M, 2.9 M And 3.3 M Are To Be Schedule Galvanized Steel With A 114Mm Od. Deck Of Size 1.16 M X 1.16 M And Staircase Of Size 1.4 M X 1.35 M Shall Be An All-Robotic Welded Assembly Fabricated From Perforated Solid Punched Steel. Deck Perimeter Is Precision Pre Punched For Attachments. Decks Are Pre Pressed, Punched, And Welded, Powder Coated To 2.2Mm Thickness Or Vinyl Plastic Coated To A Thickness Of 4Mm. Handrail Of Height 1.88 M And Dia 32 Mm Shall Be An All-Robotic Welded Unit, Fabricated From 32 O.D. Galvanized Steel Pipes. Step Climber Size Is 1.0 M X 0.5 M X 2.7 M, Piped Walls Of Size 2.4 M, Shall Be An All Robotic Welded Fabricated From 32 O.D. Galvanized Steel Pipes For The Outer Pipes And 25Mm O.D. Monkey Bar Size Is 2.35 M X 1.0 M X 2.13 M Shall Be An All Robotic Welded Fabricated From 32 O.D. Galvanized Steel For The Inner Parallel Bars. Roof Of Size 1.5 M X 1.5 M X 0.93 M, 131 Straight Slide Of Size 1.68 M X 0.66 M X 1.8 M, Wavy Slide Of Size 3.17 M X 0.58 M X 2.4 M, Spiral Slide Of Size 1.31 M X 1.73 M X 2.7M, Plastic Climbers Of Size 1.06 M X 0.73 M X 0.96 M, Tunnel, Panels, Plastic Components. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Grade And Shall Be Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As A Safety. All Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 1176 Safety Standards Including All Civil Works As Required Complete. 132 Gym Equipment 133 Supply, Erection And Fixing Of Arm & Shoulder Wheels 1300 X 1200 X1350 Mm 4Mm Pipe Main Post Made Of 4 Inch Pipe And Other Main Pipes 1-1 / 2 Inch Pipes. 3 Mm Thickness Pipes Double Coat Powder Coating, Heavy Duty Branded Sealed Ball Bearing, For Long Lasting Life. 134 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Tai Chi Spinners With A Size Of 1.25 M X 1.09 M X 1.49 M Comply With En16630 Safety Standards With Gs Test Mark. The En16630 Certificates Must Be Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only.The Gs Mark-En 16630 Certificates Must Be In The Name Of The Supplier By Themselves Or Through Their Authorised Dealers Or Contractors.All Products Must Clearly Display The Gs Mark As Has Been Issued In The En16630 Safety Certificates. Upright Structural Posts Of Height 1.49 M Is To Be Schedule Hot Dip Galvanized Steel With A 114Mm O.D. And 2.2Mm ( Wall ) Thickness Of The Tubing. Circular Handrail Of Dia 477 Mm Made With The Pipe Dia Of 32 Mm Shall Be An All-Robotic Welded Unit, Fabricated From 32 O.D. Galvanized Steel Pipes. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As Per En16630 Standards. Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 16630 Safety Standards Including All Civil Works As Required Complete. 135 Supply And Fixing Of Double Cross Walker Cardio, Lower / Upper Body Exercise. Main Post Made Of 4 Inch Pipe And Other Main Pipes 1-1 / 2 Inch Pipes. 3 Mm Thickness Pipes ( 1680 X 515 X 1780 Mm ) 4 Mm Pipe Double Coat Powder Coating, Heavy Duty Branded Sealed Ball Bearing, For Long Lasting Life. Steel Foot Rest / Foot Paddle For Long Lasting Life. 136 Design, Manufacture, Supply, Erection And Testing And Commissioning Ofelliptical Cross Trainerwith A Size Of 1.02 M X 0.53 M X 1.52 M Comply With En16630 Safety Standards With Gs Test Mark. The En16630 Certificates Must Be Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only. The Gs Mark-En 16630 Certificates Must Be In The Name Of The Supplier By Themselves Or Through Their Authorised Dealers Or Contractors.All Products Must Clearly Display The Gs Mark As Has Been Issued In The En16630 Safety Certificates. Upright Structural Posts Of Height 1.25 M Is To Be Schedule Hot Dip Galvanized Steel With A 114Mm O.D. And 2.2Mm ( Wall ) Thickness Of The Tubing. Two Numbers Of Foot Rest Of Size 320 Mm X 132 Mm Are Attached To The Standing Bars 998 Mm X 40 Mm Shall Be An All-Robotic Welded Unit, Fabricated From 40 O.D. Galvanized Steel Pipes. Lower Part Of Support Handrails Of Size 0.8 M High And Dia 47 Mm And Upper Part Of Support Handrails Of Size 0.51 M High And Dia 32 Mm Are All Robotic 137 Welded Fabricated From 47 Mm O.D. And 32 Mm O.D. Galvanized Steel Pipes. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As Per En16630 Standards. Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 16630 Safety Standardsincluding All Civil Works As Required Complete. 138 Supply And Fixing Of Push Pull Up Chair Promotes Upper Body And Triceps Strength Lat Pull Down Develops Upper Body Strengths Size 2900 X 775 X 2060Mm Main Post Made Of 4 Inch Pipe And Other Main Pipes 1-1 / 2 Inch Pipes. 3 Mm Thickness Pipes Double Coat Powder Coating, Heavy Duty Branded Sealed Ball Bearing, For Long Lasting Life. Steel Foot Rest / Foot Paddle For Long Lasting Life. . 139 Supply And Fixing Of Twister & Leg Trainer Back And Spinal Joint Exercise. Strengthens Abdominal And Spinal. Also Increase Flexibility Of Upper And Lower And Spinal. Also Increase Flexibility Of Upper And Lowerback. Size 1700 X 510 X1425mm ) 4 Mm Pipe Main Post Made Of 4 Inch Pipe And Other Main Pipes 1-1 / 2 Inch Pipes. 3 Mm Thickness Pipes Thick Rexin Covered Cushioned Seat. Double Coated Powder Coating, Heavy Duty Sealed Ball Bearing, For Long Lasting Life Supply And Fixing Of Twister & Leg Trainer Back And Spinal Joint Exercise. Strengthens Abdominal And Spinal. Also Increase Flexibility Of Upper And Lower Back. Size 1700 X 510 X1425mm ) 4 Mm Pipe Main Post Made Of 4 Inch Pipe And Other Main Pipes 1-1 / 2 Inch Pipes. 3 Mm Thickness Pipes Thick Rexin Covered Cushioned Seat. Double Coated Powder Coating, Heavy Duty Sealed Ball Bearing, For Long Lasting Life 140 Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As Per En16630 Standards. All Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 16630 Safety Standardsincluding All Civil Works As Required Complete. 141 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Self Weight Rower With A Size Of1.26 M X 0.80 M X 1.59 Mcomply With En16630 Safety Standards With Gs Test Mark. The En16630 Certificates Must Be Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only. The Gs Mark-En 16630 Certificates Must Be In The Name Of The Supplier By Themselves Or Through Their Authorised Dealers Or Contractors.All Products Must Clearly Display The Gs Mark As Has Been Issued In The En16630 Safety Certificates. Horizontal Bars Of Length 1.08 M Is To Be Schedule Hot Dip Galvanized Steel With A 114Mm O.D. And 2.2Mm ( Wall ) Thickness Of The Tubing. Handle Bars Of 0.74 M And Dia 38 Mm. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As Per En16630 Standards. Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 16630 Safety Standardsincluding All Civil Works As Required Complete. 142 Design, Manufacture, Supply, Erection And Testing And Commissioning Ofmini Ski With A Size Of 1.07 M X 0.78 M X 1.40 M Comply With En16630 Safety Standards With Gs Test Mark. The En16630 Certificates Must Be Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only. The Gs Mark-En 16630 Certificates Must Be In The Name Of The Supplier By Themselves Or Through Their Authorised Dealers Or Contractors.All Products Must Clearly Display The Gs Mark As Has Been Issued In The En16630 Safety Certificates. Upright Structural Posts Of Height 1.40 M Is To Be Schedule Hot Dip Galvanized Steel With A 114Mm O.D. And 2.2Mm ( Wall ) Thickness Of The Tubing. The Standing Bars 991 Mm And Dia 60 Mm. Upper Part Of Support Handrails Of Size 1.04 M High And Dia 38 Mm Are All Robotic Welded Fabricated From 40Mm O.D. And 32 Mm O.D. Galvanized Steel Pipes. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Of Tamper Resistant 143 Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As Per En16630 Standards. Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 16630 Safety Standardsincluding All Civil Works As Required Complete. 144 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Bicycle Of Size 0.97M X 0.49 M X 1.30 M Comply With En16630 Safety Standards With Gs Test Mark. The En16630 Certificates Must Be Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only. The Gs Mark-En 16630 Certificates Must Be In The Name Of The Supplier By Themselves Or Through Their Authorised Dealers Or Contractors.All Products Must Clearly Display The Gs Mark As Has Been Issued In The En16630 Safety Certificates. Upright Structural Posts Of Height 1.33 M Is To Be Schedule Hot Dip Galvanized Steel With A 60 Mm O.D. And 2.2Mm ( Wall ) Thickness Of The Tubing. Two Numbers Of Pedal Of Size 113Mm X 40Mm & Rotating Disc Of Dia 380 Mm Shall Be An All-Robotic Welded Unit, Fabricated From 40 O.D. Galvanized Steel Pipes. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be 145 Covered With Safety Caps As Per En16630 Standards. Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 16630 Safety Standardsincluding All Civil Works As Required Complete. 146 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Squat Pusher With A Size Of 1.93 M X 0.56 M X 1.70 Mcomply With En16630 Safety Standards With Gs Test Mark. The En16630 Certificates Must Be Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only. The Gs Mark-En 16630 Certificates Must Be In The Name Of The Supplier By Themselves Or Through Their Authorised Dealers Or Contractors.All Products Must Clearly Display The Gs Mark As Has Been Issued In The En16630 Safety Certificates.Vertical Bars Height Of 1.50 M Is To Be Schedule Hot Dip Galvanized Steel With A 114Mm O.D. And 2.2Mm ( Wall ) Thickness Of The Tubing. L Shaped Bars Of 960 Mm X 600 Mm Carrying Two Seats Of 0.34 M X 0.34 M Shall Be An All-Robotic Welded Unit, Fabricated From 40 O.D. Galvanized Steel Pipes. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As Per En16630 Standards. Joints Are Robotic Welded. All Components Designed And Manufactured Tomeet With En6630 Safety Standardsincluding All Civil Works As Required Complete. 147 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Sit-Up Station With A Size Of 1.48 M X 1.21 M X 0.63 M Comply With En16630 Safety Standards With Gs Test Mark. The En16630 Certificates Must Be Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only. The Gs Mark-En 16630 Certificates Must Be In The Name Of The Supplier By Themselves Or Through Their Authorised Dealers Or Contractors.All Products Must Clearly Display The Gs Mark As Has Been Issued In The En16630 Safety Certificates.Upright Structural Posts Of Height 0.63 M Is To Be Schedule Hot Dip Galvanized Steel With A 114Mm O.D. And 2.2Mm ( Wall ) Thickness Of The Tubing. Two J Shaped Bars Of 1.07 M And Dia 48 Mm. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Safety Caps As Per En16630 Standards. Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 16630 Safety Standardsincluding All Civil Works As Required Complete. 148 Supplying And Fixing Of Leg Extension / Leg Curf : Pl 9019 Of Glass Fiber Reinforced Nylon Pulleys With Deep V- Groove Provides Secure Cable Seating And Fluid Bearing Rotation. Shroud Is Applied To Protect The Equipment Or The Possible Injury During Operation. Tubing: 2.5 Mm To 2.75 Mm Square Tube Differ Into Any Types, From 30 X 60X 2.75 Mm Square Tube Differ Into Any Types, From 30 X 60Mm To 50 X 100 Mm, Electro-Welded To Maximum Integrity. Pad Total Thickness Is 70 Mm Dimension: 1465 L X 1245 W X 1520 H ( Mm ) Product Weight: 115.5 Kg / 255 Lbs Warranty: 1 Year. 149 Design, Manufacture, Supply, Erection And Testing And Commissioning Ofdouble Air Skier Comply With A Size Of1.61 M X 0.52 M X 1.51 M With En16630 Safety Standards With Gs Test Mark. The En16630 Certificates Must Be Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only. The Gs Mark-En 16630 Certificates Must Be In The Name Of The Supplier By Themselves Or Through Their Authorised Dealers Or Contractors.All Products Must Clearly Display The Gs Mark As Has Been Issued In The En16630 Safety Certificates.Upright Structural Posts Of Height 1.25 M Is To Be Schedule Hot Dip Galvanized Steel With A 114Mm O.D. And 2.2Mm ( Wall ) Thickness Of The Tubing. The Foot Rest Of Size 365 Mm X 164 Mm Is Fixed To The Standing Bars Of Length 1640 Mm X 40 Mm Shall Be An All-Robotic Welded Unit, Fabricated From 40 O.D. Galvanized Steel Pipes. Lower Part Of Support Handrails Of Size 0.8 M High And Dia 47 Mm And Upper Part Of Support Handrails Of Size 0.51 M High And Dia 32 150 Mm Are All Robotic Welded Fabricated From 47 Mm O.D. And 32 Mm O.D. Galvanized Steel Pipes. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered Safety Caps As Per En16630 Standards. Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 16630 Safety Standardsincluding All Civil Works As Required Complete. 151 Supplying And Fixing Of Lat Pull Down / Seated Row: Pl 9002 Of Glass Fiber Reinforced Nylon Pulleys With Deep V-Groove Provides Secure Cable Seating And Fluid Bearing Rotation. Shroud Is Applied To Protect The Equipment Or The Possible Injury During Operation Equipment Or The Possible Injury During Operation Tubing: 2.5 Mm To 2.75 Mm Square Tube Differ Into Any Types, From 30 X 60 Mm To 50 X 100 Mm, Electro-Welded To Maximum Integrity. Pad Total Thickness Is 70 Mm Dimension: 1764 L X 1019 W X 2182 H ( Mm ) Product Weight: 90.5 Kg / 200 Lbs Warranty: 1 Year 152 Exposed Hardware Shall Be Covered With Safety Caps As Per En16630 Standards. Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 16630 Safety Standardsincluding All Civil Works As Required Complete. 153 Design, Manufacture, Supply, Erection And Testing And Commissioning Of Seated Chest Press With A Size Pof 1.82 M X 0.69 M X 1.88 M Comply With En16630 Safety Standards With Gs Test Mark. The En16630 Certificates Must Be Issued By A Reputed Notified International Certifying Body Such As Ipema, Tuv, Cpsc, Or Sgs Only. The Gs Mark-En 16630 Certificates Must Be In The Name Of The Supplier By Themselves Or Through Their Authorised Dealers Or Contractors.All Products Must Clearly Display The Gs Mark As Has Been Issued In The En16630 Safety Certificates.Upright Structural Posts Of Height 1.88 M Is To Be Schedule Hot Dip Galvanized Steel With A 114Mm O.D. And 2.2Mm ( Wall ) Thickness Of The Tubing. Two Pair Of U-Shaped Bars Of 1.02 M And Dia 40 Mm While The Handles Are Placed At A Spacing Of 698 Mm Shall 154 Be An All-Robotic Welded Unit, Fabricated From 40 O.D. Galvanized Steel Pipes. Joints Are Robotic Welded. Bolts, Nuts, Screws, Washers And Etc Used For Assembly Shall Be Stainless Steel 304 Of Tamper Resistant Stainless Steel. Exposed Hardware Shall Be Covered With Caps As Per En16630 Standards. Joints Are Robotic Welded. All Components Designed And Manufactured To Meet With En 16630 Safety Standardsincluding All Civil Works As Required Complete. 155 Play Equipment 156 Supply And Fixing Of Badminton Court Poles 2 Nos. Ss 304With 46 X 46 Mm 3Mm Poles With A Overall Height Of 2.0 M Height White Colour Powder Coated With 80 Micron Thick, 1550 Mm Above Ground And 450 Mm Below Ground, Nylon Net With 1.0 M Heightincluding Excavation, Civil Work Including Cost Of All Materials , Labour, Lead Lift Etc., Complete. 157 Supply And Delivery Of Aluminium Alloy Ovel Frame With Steel Handle Badminton Racquetswith Overall Dimension Of 680 Mm Long, 230Mm Frame Width, 280 Mm Long String Area, 95 Mm Grip Perimeter String With High Quality Nylon Confirming To The Badminton Federation Of India Standards.. 158 Supply, Installation Of Basket Ball Pole Of 10 Feet Height 65 Mm Dia, With Back Stop Unit, Approved Colour Of Powder Coated With 80 Micron Thick, 25 Mm Acrylic Sheetincluding Excavation, Civil Work Including Cost Of All Materials , Labour, Lead Lift Etc., Complete. 159 Supply And Delivery Of Rubberbasket Ball For Competition ( Competition In All Categories-Size- 7. With Inner Nylon Cloth Lining, The Outer Surface Of The Ball Shall Be Made Of Toxic Free Leather Or Rubber Material With Ball Circumference Range From 749 Mm To 780 Mm And Mass Of 567 G To 650 G ) 160 Supply And Delivery Of Rubberfootball Made Out Od Moulded Synthetic Material With 32 Panels, Hand Stitched, With A Size Of 580 - 600Mm Dia, Weigh Of 3002 To 320 Grams All Inclusive. 161 Supply And Delivery Of Rubbervolleyball Spherical Shaped, Made Out Of Moulded Synthetic Material, Hand Stitched, With A Circumference, Latex Bladder, Of 660 Mm Size Weigh Of 270 Grams Cotton Stitching, All Inclusive. 162 Electrical 163 Tneb Metering Boardsupply And Fixingof Tneb Meter Board Suitable For 3 Phases 100 A Service Connection Made Up Of Suitable Iron Angel Frame Work Of Size 2 Feet X 1.5 Feet Using Angle Iron Of Size 1 1 / 2 X 1 1 / 2 X 1 / 4 Rigidly Fixed On Wall Covered With Hylem Sheet Of Size 2 Feet X 1.5 Feet Of 12 Mm Thickness With Necessary Bolts And Nutt Supports And Supply, Installation And Commissioningof 3 Nos 100 A Fuse Units ( 500V ) , 1 No Neutral Link , Copper Flat Of Size 1 X 1 / 4 With Interconnection Of Eb Meter To Fuse Units By 19 / 16 Pvc Insulated Copper Wire With Earth Connection And To Complete The Work Etc. 164 250A Isolator Switch- Supply And Fixing Of 200A Tpn Switch Disconnector Fuse Units In Sheet Steel Enclosure With Hrc Fuses Double Break On Suitable Angle Iron Frame Work With Ms Cable Entry Boxes With Pwd Earthing. 165 Supply And Fixing Of 6 Way Vertical Triple Pole And Neutral Mccb Sheet Steel Enclosure Distribution Board ( With Mccb Incomer ) With Double Door ( Metal Door ) With 1 No. 160 A 4 P Mccb Switch As Incoming And 4Nos. 63A 3P Mcb , 6 Nos. 6A To 32A Sp Mcb As Outgoing With Suitable Cable End Box On Wall With Earth Connection Only. 166 Supply And Fixingof8 Way Verticaltpmcbsheetsteel Industrial Type Tpmcb Db With Ip54 Protection Of Surface Type Fitted With Bus Bars And Neutral Links With1 No. Of 63A Fp Mcb As Incoming And 4 Nos. Of32a, 10Ka Triple Pole Mcb In Flush With Wall And Making Good Of The Concealed Portion With Earth Connection. ( Industrial Type Tpmcb Db With Ip54 Protections ) 167 Supply And Fixing Of 7 Segment8 Way63a Tpn Mcb Sheet Steel Distribution Board ( Higher End ) With Metal / Acrylic Doorcover Flush Type / Surface Type Fitted With Busbars And Neutral Links With Single / Three Phase Mcb Outgoings And Separate 4 Way Provision For Accommodating One No. 4 Pole Incoming Mcb / Isolator And Another Separate 4 Way Provision For Accommodating One No. 4 Pole Elcb / Rcd ( Totally 8 Ways In One Segment ) ( 3X 6 Ways In Each Segment ) And Separate Provision For Mcb / Isolators ( Totally 18 Nos. ) For Sub Incomers In 3 Segments With Label Holder And Provision For Taking Up Cable For Size Not Less Than 35 Sq.Mm. Withthe Following In Flush With Wall With Earth Connection Only. 168 Supply And Fixing Of 12Way Single Pole And Neutral Mcb Sheet Steel Enclosure Distribution Board With Double Door ( Metal ) 1No. 32A 30 Ma 4 Pole Elcbas Incoming And10 Nos. 6A To 32A Sp Mcb Outgoing In Flush With Wall. The Mcb Db And McbS Should Be With Isi Mark ( Like Standard Make ) 169 Supply And Laying Of Following Xlpe Armoured Ltug Cable In A Trench / Tray With Suitable Cable Tie Tag Etc As Required. 170 Supply And Laying Of 3 1 / 2 X 70 Sq.Mm. Pvc Armoured Ltug Cable In Suitable Size Hdpe Pipe In A Trench To Be Excavated At A Depth Of 0.75 Metre And Refilling The Earth To Make Good. 171 Supply And Laying Of 31 / 2 X 35Sq.Mm. Pvc Armoured Ltug Cable In Suitable Size Hdpe Pipe In A Trench To Be Excavated At A Depth Of 0.75 Metre And Refilling The Earth To Make Good. 172 Supply And Laying Of 31 / 2 X 25Sq.Mm. Pvc Armoured Ltug Cable In Suitable Size Hdpe Pipe In A Trench To Be Excavated At A Depth Of 0.75 Metre And Refilling The Earth To Make Good. 173 Supply And Laying Of 4C X 16 Sq.Mm. Pvc Armoured Ltug Cable In Suitable Size Hdpe Pipe In A Trench To Be Excavated At A Depth Of 0.75 Metre And Refilling The Earth To Make Good. 174 Supply And Clamping Of Following Xlpe Armoured Ltug Cable On Post Or On Wall Ms-Clamps , Saddles, Plugs, Screws Etc., As Required. 175 Supply And Clamping Of 3 1 / 2 Core X 70 Sq.Mm Pvc Armoured Ltugaluminium Cable On Post Or On Wall Ms-Clamps, Saddles, Plugs, Screws Etc., Complete Including Transport Charges Of Ug Cable. 176 Supply And Clamping Of 3 1 / 2 Core X 35 Sq.Mm Pvc Armoured Ltugaluminium Cable On Post Or On Wall Ms-Clamps, Saddles, Plugs, Screws Etc., Complete Including Transport Charges Of Ug Cable. 177 Supply And Clamping Of 3 1 / 2 Core X 25 Sq.Mm Pvc Armoured Ltugaluminium Cable On Post Or On Wall Ms-Clamps, Saddles, Plugs, Screws Etc., Complete Including Transport Charges Of Ug Cable. 178 Supply And Clamping Of 4C X 16 Sq.Mm Pvc Armoured Ltugaluminium Cable On Post Or On Wall With Ms-Clamps, Saddles, Plugs, Screws Etc., Complete Including Transport Charges Of Ug Cable. 179 Supply And Fixing Of Double Compression Brass Cable Gland For Following Aluminium Conductorxlpe Insulatedarmoured Cable Of 1100 V Grade With Earth Connection. 180 Supply And Fixing Of Brass Cable Gland For3 1 / 2 Cx 70 Sq.Mm Pvc Ltugarmoured Cable With Earth Connection 181 Supply And Fixing Of Brass Cable Gland For3 1 / 2 Cx 35 Sq.Mm Pvc Ltugarmoured Cable With Earth Connection 182 Supply And Fixing Of Brass Cable Gland For3 1 / 2 Cx 25 Sq.Mm Pvc Ltugarmoured Cable With Earth Connection 183 Supply And Fixing Of Brass Cable Gland Suitable For4c X 16 Pvc Armoured Ltug Cable With Earth Connection. 184 Supply And Providing Cable End Termination Of The Following Sizepvc Ltug Aluminium Armoured Cable With Necessary Aluminium Cable Sockets By Crimping Etc With Electrical Connection Complete ( Copper Sockets For Copper Cables And Alu. Sockets For Alum. Cable ) 185 Supply And Providing Cable End Termination Of 3 1 / 2Corex 70 Sq.Mm Pvc Ltug Aluminium Armoured Cable With Necessary Aluminium Cable Sockets By Crimping Etc., With Electrical Connection Complete. 186 Supply And Providing Cable End Termination Of 3 1 / 2Corex 35Sq.Mm Pvc Ltug Aluminium Armoured Cable With Necessary Aluminium Cable Sockets By Crimping Etc., With Electrical Connection Complete. 187 Supply And Providing Cable End Termination Of3 1 / 2Corex 25Sq.Mm Pvc Ltug Aluminium Armoured Cable With Necessary Aluminium Cable Sockets By Crimping Etc., With Electrical Connection Complete. 188 Supply And Providing Cable End Termination Of 4 C X 16Sq.Mm Pvc Ltug Aluminium Armoured Cable With Necessary Aluminium Cable Sockets By Crimping With Electrical Connection Complete. 189 Wiring With 2 X1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Single Core Unsheathed Copper Conductor Of 1100 V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling With Pvc Accessories With Module Gi Switch Box In Flush With Wall With 6A One Way Module Switch With Module Front Plate Continuous Earth Wire Connection By 1.0 Sq.Mm. Pvc Insulated Sc Unsheathed Copper Wire And Making Good Of The Concealed Portion With Suitable Colour For Concealed Pvc Light Point / Fan Point ( For Electronic Regulator ) ( 4Points / Coil ) Higher End 190 Wiring With 2 X 1.5 Sq.Mm. ( 22 / 0.3 ) Pvc Insulated Sc Unsheathed Copper Conductor Of 1100V Grade In Suitable Pvc Rigid Pipe Concealed In Wall And Ceiling Withmodule Gi Switch Box In Flush With Wall With 6A One Way Module Switch With Module Front Plate Continuous Earth Wire Connection By 1 Sq.Mm. Pvc Insulated Sc Unsheathed Copper Wire And Making Good Of The Concealed Portion With Suitable Colour For Pvc Concealed Light ( 6 Points Per Coil ) ( For Rooms Like Bath, Toilet & Pumproom, Etc. ) . 191 Wiring With2rx1.5Sqmm ( 22 / 0.3 ) Pvc Insulated Unsheathed Sc Cu. Conductor Of 1100Vpvcconduit Pipeconcealed Wall And Ceilingwith Pvcaccessoriesgi Metal Back Box And 6A Modularswitch & 6A Modular Socket ( Board Itself Point ) In Flush With Wall Mounted On Poly Carbonate Front Plate With Switch Mounting Metal Parts, For Making Good Of The Concealed Portion With Suitable Colour For Pvc Concealed Point ( 8 Points / Coil ) 192 Supply, Run, Testing And Commissioning Of2 Run X 2.5 Sqmm And 1R Of 1.5Sq Sqmm Pvc Insulated Sc Unsheathedof 1100V Grade In Suitable Pac Conduit Pipe Onconcealed Wall And Ceiling With Continuous Earth Wire Connection With Painting Of Suitable Colour. 193 Supply And Run Of 50Mm Dia.Hdpe Pipe Of 4Kgf / Cm2 Approved Quality And Best Variety Conforming To Iss And Isi Markbelow Ground Inhdpe Pipes 194 Supply And Installationof 16M High Mast Shaft In Two Sections Suitable For 50 M / Sec Wind Speed, With Head Frame, Winch Mounting Bracket, Luminaries Carriage Suitable To Install 8 Nos Of 150W Led Light Fittings Luminaries ( Semi- Circle Arrangement ) With Counter Weight Arrangements , Mounting Clamp And Brackets Etc. Raising , Lowering System Comprising Double Drum Winch, Suitable Ss Wire Rope, Trailing Cable, Connector, Integral Power Tool Motor, Manual Handle, Junction Box, Lighting Finial, Lightning Spike If Require, Wiring Material From Jb To Individual Luminaire & Mcb In Base Compartment Are Included And Are A Part Of Installation, Foundation Bolts Manufactured From Special Steel Along With Nuts, Washers, Anchor Plate And Common Template. 150W Led Single Light Fitting Dome Aviation Obstruction Light, Outdoor Stand Mounted Feeder Pillar With 63A 4Pole Rccb With 100Ma, Single Dial Time Switch, 45A Tp Contactor For The Automatic Switching Of Luminaries , Power Tool Control With 2 No 9A Contactors And Raise Lower Push Button, Incoming 35 Sq. Mm And Outgoing 25& 4.0 Sq. Mm Terminals, Shallow Foundation With M25 Grade Concrete For The High Mast Considering The Safe Soil Bearing Capacity At Site As 10 T / Sqmtr At 2 Metre Depth With All Materials And Labour, Gi Pipe Earthing For High Mast With 2.5 M Long 40Mm Die Gi Pipe Including Connection To High Mast Earth Terminal With 25 X 3 Mm Gi Flats With All Materials And Labour ( 2Nos Per Mast Required ) , Wiring Of Luminaires With All Wiring Materials Like Pvc Insulated Pvc Sheathed Flexible Cable Of Suitable Copper Conductor Cores Of 2.5 Sq. Mm, Lugs, Mcb And All Labour, Mast Feeder Pillar By Grouting The Stand In Concrete. With Allnecessary Components For The Complete Functional Operation. Contractor To Getstructural Approval From The Civil Team For The High Mast Foundation 195 Supply And Fixing Of 150 Mm Dia. Gi Pipe ( Class B ) Of 9 Metre Length With 300Mm X 300Mm X 6Mm Ms Base Plate Duly Welded At The Bottom With Concreting With Construction Of Masonry Pedestal With Suitable Smc Box With Door Arrangement To House 10A Sp Mcb , 2 / 4Way Connector On Suitable Hyleg Sheet And With Supply And Fixing Of Unique Modular 250W Led Floodlight Made Up Of Pressure Die Cast Aluminium Housing With Toughened Glass And High Power Leds And Secondary Lenses With Ip66 Protection. Available In Nb / Mb / Wb Angles. 10Kv Spd Included, System Efficacy = 110 / 120 / 135 Suitable To Operate In 120 - 280 V Ac, 50 / 60 Hz Complete With Suitable Ms Brackets For 200W Led Floodlight Fitting And Smc Box With Pvcunsheathed Copper Leads From Smc Box To Fitting And With Painting Of Suitable Colour. Crompton Cfs-501-300-57-60D-Hl3-Gl-Nbkg 196 Supply And Fixing Of 65 Mm Dia. ( 2 -1 / 2 ) Gi Pipe ( Class B ) Of 6 Metre Length With 300Mm X 300Mm X 6Mm Ms Base Plate Duly Welded At The Bottom With Concreting With Construction Of Masonry Pedestal With Suitable Smc Box With Door Arrangement To House 10A Sp Mcb , 2 / 4Way Connector On Suitable Hylem Sheet And With Supply And Fixing Of Floodlight Luminaire With Superior Polycarbonate Optics Pressure Die-Cast Housing, Ip66 Ingress Protection, 4Kv In-Built And 10Kv External Surge Protection. Efficacy 110Lm / W. Available In Nb / Mb / Wb Angles. Complete With Suitable Ms Brackets For 200W Led Floodlight Fitting And Smc Box With Pvcunsheathed Copper Leads From Smc Box To Fitting And With Painting Of Suitable Colour. ( Sd 543 ) . ( Bajaj Gleam F 220L Wh Sy Pc Sd V2 ) 197 Supply And Fixing Of 65 Mm Dia. ( 2 -1 / 2 ) Gi Pipe ( Class B ) Of 4 Metre Length With 300Mm X 300Mm X 6Mm Ms Base Plate Duly Welded At The Bottom With Concreting With Construction Of Masonry Pedestal With Suitable Smc Box With Door Arrangement To House 6A Sp Mcb Switch, 2 / 4 Way Connector On Suitable Hylem Sheet And Supply And Fixing Of 45W Led Toplight Fitting With Led ( Higher End ) With 1 Metre 32Mm Dia. Gi Pipe ( Class B ) Complete With Suitable Ms Clamps For Led Street Light Fitting And Smc Box With Pvcunsheathed Copper Leads From Smc Box To Fitting And With Painting Of Suitable Colour ( Sd 541 ) ( 45W Led Top Light Fittings 198 Supply, Installation, Testing & Commissioning Of 10W Led Bollard Light Fittings Fitting. The Light Fitting Should Be Powder Coated With High Pressure Die-Cast Aluminium Led Housing. And The Led Fixed On Die-Cast Aluminium Heat Sink For Proper Thermal Management.And The Operating Voltage Range 140 – 270V Ac, Provided With Open And Short Circuit Protection And Input Surge Voltage Protection. The Driver Should Be Constant Voltage Constant Current Smps Protection Of Fitting Should Be Ip 66. Led Having 50, 000 Burning Hours With Minimum 70% Lumen Maintenance And Power Factor 0.95.System Consumption Should Be Require With Lumen Package As Per Requirement. Crompton Cat Ref : - Lbla3-10-Cdl / Equivalent- ( Landscape Light ) . Rate Shall Inclusive Of Necessary Joint Kit, Glands, Etc., For Loop In / Outconnection Suitable To Outdoor Application . 199 Supply And Fixing Of 30W Led Street Light Fitting With Led ( Higher End ) With 25 Mm Dia. Gi Pipe ( Class B ) With 1 No. 25 Mm Gi Bend Complete On The Existing Post / On Wall With Pvc Unsheathed Copper Leads With Ms Clamps And Withpainting. 200 Supply, Installation, Testing And Commissioning Of 18 W Led Down Light Fittingwith Ip55 Cool Day Light Suitable For Pole Mounting, Made Outcrca Powder Coated Body, Aluminium Reflectors, Poly Methyl Meth Acrylate ( Pmma ) Diffuser, Glare Free Light, Including Electronic Drivers, Day Light Colour Led Lamps, Inter Connecting Wiring With Suitable Fixing Clams, Hooks As Required Including Accessories All Inclusive. 201 Supply, Installation, Testing And Commissioning Of 40 W Led Tube Light Fitting With Cool Day Light Made Out Of Crca Powder Coated Body, Poly Methyl Meth Acrylate ( Pmma ) Diffuser, Glare Free Light, Suitable For Recessed / Surface Mounting Including Electronic Drivers, Day Light Colour Led Lamps, Inter Connecting Wiring Including Accessories All Inclusive. 202 Supply And Fixing Ofpressure Die Cast Aluminium Housingbulk Head 10W Led Fitting With Ip65 Protected Withpvc Unsheathed Copper Leads From Terminals To The Fitting. Model Equivalent To Cromptonlbhe-10-Cdl ( Rate As Per Quotation ) ( Philips / Bajaj / Crompton / K.Lite ) 203 Supply And Fixing Of 1200Mm ( 48 ) Sweep Ac Ceiling Fan 5 Star Rated Complete ( Higher End ) With 2 Module 100W Fan Step Regulator ( Higher End ) With 600Mmdown Rod With Fan Clamp, And Wiring To The Nearby By Point With 1.5 Sqmm Frls , Pvc Insulated Copper Wires, Including Necessaryaccessories And HardwareS As Required. 204 Supply And Fixing Of 300Mm ( 12 ) Sweep ( Heavy Duty ) Ac Exhaust Fan Complete With Necessary Wall Opening And Making Good Of The Wall And Wiring To The Nearby By Point With 1.5 Sqmm Frls Pvc Insulated Copper Wires Including Necessaryaccessories And HardwareS As Required. 205 Supply And Fixing Of Louvers Shutters Arrangements For 300Mm ( 12 ) Sweep ( Light Duty ) Ac Exhaust Fan, Including Necessaryaccessories And HardwareS As Required. - 206 Supply And Fixing Of 1 No.16A Two Modulesocket , 1 No.16A One Module Switch With Module Cover Plate ( Plastic ) Onsuitable Module Concealedbox ( Gi ) In Flush With Wallwith Connections. Scope Cover Wall Cutting , Grouting , Flushing And Making Good On The Wall. Higher End.- 207 Supply And Fixing Of 2Nos.6A Two Module 5 Pin Socket , 2 Nos. 6A One Module Switch With Module Cover Plate ( Plastic ) On Suitable Module Concealed Box ( Gi ) In Flush With Wall With Connections. Scope Cover Wall Cutting , Grouting , Flushing And Making Good On The Wall. Higher End. 208 Earthing As Per The Isi Specification With An Earth Electrode Of 2.10 Metre Class B Gi Pipe Of Dia. Not Less Than 50Mm And 2 Mtr Long Earth Electrode Of Low Carbon Steel Rod With 100 Micron Bonding And 25 Kgs Of Carbon Based Environment Friendly Backfill Compound And Suitable Clamp Andwithcopper Earth Plate Of Size 125Mm X 50Mm X 6Mm With Necessary Funnelling Arrangements With Necessary Masonry Work And With 38Mm Rcc Cover Slab For The Brick Masonry 209 Coil Earth To Street Light Poles With No.8 Swg Gi Wire Of 11.5 Metres Of Length In Which 10 Metres Of Total Length Compressed In To A Coil Of One Meter Length ( 75Mm To 100Mm Dia. ) Connected Suitable With Hexagonal Earth Bolt Of Size 8Mm In To 25Mm Welded On The Pole At One End With A Coil Position Fixed On The Earth. 210 Supply, Fabrication, Of Gi / Copper Earth Flatof Following Size In Provided Trench, Clamping In Wall, Ceiling, With Suitable Clamps / Saddles, Connecting The Joints Through Bracing / Welding Covering Withtermination In The Earth Pits, Panels, Distribution Boards And EquipmentS With Bitumen Paint Including Accessories Wooden Plugs, Screws, Fastener Etc., All Inclusive 211 25 Mm X 6Mm Gi Flat ( Sd-77 ) 212 No8 Swg Copper ( M-1571 ) 213 No8 Swg Gi 214 Lighting Rodsupply Of Early Streamer Emission Air Terminal ( Eseat ) .Model: Sthe Eseat Has Corrosion Resistant Stainless Chrome Body Made Up Of Aisi 316 Grade Of Height 0.50 Metres Capable Of Working In Hazardous Atmosphere. The Air Terminal Is Non-Radioactive And Requires No Special Licensing. The Unit Is Fully Autonomous ( No Battery, No External Power Supply Is Required ) , Collects Energy From The Ambient Electric Field. The Eseat Model Has Been Tested In A High Voltage Laboratory In Accordance With Nfc 17 102 In Order To Measure The Average Gain In Triggering. The Average Gain In Triggering Time ( ?Ts ) Obtained During The Lab Test For The Offered Model Is 60 Μs. The Eseat Works On Negative As Well As Positively Polarized Discharges. Eseat Has Been Tested For Such Discharges In Central Power Research Institute ( Cpri ) . A Dedicated Tester Is Available To Test The Healthiness Of The Eseat On Request ( Page No. 37, Point No. 3 Of Clause 8.6 Of The Revised Nfc 17-102 Version 2011 ) . Eseat Model : S - Radius Of Protection : 46 Metres Level Of Protection Considered For The Project-Ii Level 215 Mounting Structuresupply Of Standard / Special Mounting Structure Of Height 4.5 Mts. Pipe, And 300 X 300 X 8Mm Ms Plate, 3 Mts. 48Mm Odclass C Gi Outer Pipe, 1.8 Mtr, 38Mm Od Inner Pipe, For Roofmounting On Concrete Base And With Frp Adapter 216 Down Conductorsupply And Run Of 25Mm X 6Mm Gi Flat Down Conductor With Necessary Clamps / Supports On Wall / Floor / Ground For Earthconnection 217 Test Linksupply Of Test Link Box For Each Down Conductor In Order To Disconnect The Earth Termination System To Enable Measurement Of Resistance 218 Supply And Installation Maintenance Free Gi Earthing System Comprising Of 50Mm Dia. And 2 Mtr. Long Earth Electrode Of Low Carbon Steel Rod With 100 Micron Bonding And 25 Kgs. Of Carbon Based Environment Friendly Backfill Compound And Suitable Clamp 219 Surge Protectionsupply And Installation Cabinet Type Class 1 And 2 Combined Model Spd To Arrest Surges And Over Voltage In The Power Line Due To Lightning Switching Action Etc. They Must Be Installed In The Incoming Mcc Panel / Db Of The Respective Building In Parallel To The Power Circuit. Model: Psv4-12.5 / 400Tt ( 3 Phase Power Network ) 220 First Aid Box Complete With All First Aid Medicines ( M-1977 ) 221 Shock Treatment Chart Fixed In Glass Frame ( M-1978 ) 222 Danger Board As Required By The Electrical Authorities ( M-1981 ) 223 Supply And Kept In Position Of 9 Litres Capacity Fire Buckets Of 4 Nos. With Bucket Stand As Per Standard Specifications And As Directed By The Departmental Officers 224 Supply And Fixing Of Carbon-Di-Oxide Gas Type 2 Kg. Capacity Fire Extinguisher As Per New Is15683, Complete With Control Valve, Discharge Hose With Horn, Wall Mounting Bracket, Safety Clip Etc., Including Conveyance, All Incidental Charges, Necessary Scaffolding And Re-Doing The Dismantled Portions To Its Original Condition Wherever Found Necessary Etc., Complete As Per Standard Specification And As Directed By The Departmental Officers. Make: Excellent / Safety First / Equivalen 225 Cctv System 226 Supply, Installation, Testing And Commissioning Of 32 Channel 8 Sata Nvr, With 6T Hard Disk Drive 4 Nos, New Logical And Visualized Gui Design Dual-Os Design To Ensure High Reliability Of System Running, Anr Technology To Enhance The Storage Reliability When The Network Is Disconnected, Configurable Normal Or Hot Spare Working Mode To Constitute An N+1 Hot Spare System Video Input And Transmission, Connectable To The Third-Party Network Cameras Compression And Recording, H.265+ Compression Effectively Reduces The Storage Space By Up To 75%, Full Channel Recording At Up To 12Mp Resolution Hd Video Output ? Hdmi1 / Vga1 Outputs Provided ? Hdmi1 Video Output At Up To 4K ( 3840 × 2160 ) Resolution Storage And Playback, Upton 16 Sata Interfaces And 1 Esata Interface For Hdd Connection, Support Up To 10Tb Capacity For Each Hdd, Smart Search For Efficient Playback. And Smart Playback To Improve The Playback Efficiency, Supports Vca Search For Fire / Ship / Temperature / Temperature Difference Detection Triggered Video Files, Pos Information Overlay On Live View And Playback, Pos Triggered Recording And Alarm Network & Ethernet Access ? Hik-Connect For Easy Network Management, 2 Gigabit Ethernet Network Interfaces. ( Make : Hikvision / Dahua / Sony. 227 Supply Of 8Mp, Internet Protocol Fixed Bullet Camera With Following Specification:?1 / 2.5 Progressive Scan Cmos, ? 3840 × 2160 @15 Fps, 2.8 / 4 Mm Fixed Lens, 01 Lux @ ( F1.2, Agc On ) , 0.028 Lux @ ( F2.0, Agc On ) , 0 Lux With Ir, H.265+, H.265, H.264+, H.264, 2 Behaviour Analyses ( Line Crossing Detection, Intrusion Detection ) ? Face Detection ? 120Db Wdr, ? Blc / 3D Dnr / Roi, Ip67 Complied?On-Board Storage -Built-In Micro Sd / Sdhc / Sdxc Card Slot, Up To 128 Gb, ? Shutter Speed 1 / 3 S To 1 / 100, 000 S, ? 3-Axis Adjustment Pan: 0° To 360°, Tilt: 0° To 100°, ? Rotate: 0° To 360°, 2.8 Mm, ? Horizontal Fov: 102°, Vertical Fov: 53°, Diagonal Fov: 124°, ?Lens Mount M12 ? Ir Range I5: Up To 50 M, ? Image Settings Rotate Mode, Saturation, Brightness, Contrast, Sharpness Adjustable By Client Software Or Web Browser, ? Power Consumption And Current-12 Vdc, 0.7 A, Max. 7.5W Poe: ( 802.3Af, 36V To 57V ) , 0.3 A To 0.2 A, Max. 9W 228 ? Camera Out Fitted With Metal Housing So As To Prevent The Lens From Damages During Physical Abuse. ( Make: Dahua / Panasonic ) ( Rate As Per Quotation Enclosed ) 229 Supply, Installation, Testing And Commissioning Of 55 Smart Led Tv With Following Specifications A ) Full Hd 1920 X1080 ( 4K Monitor ) B ) Ips Panel C ) Slim Back Light Led Module D ) 900 Pmi E ) Triple Xd Engine F ) Dynamic Scanning G ) Anrh ) True Colour Generatori ) 8Modes Of Picture J ) Picture Wizardiii K ) Real Cinema 24P L ) Hdmi -3Nos M ) Usb -3Nos N ) Built In Lan O ) Magic Remotep ) Dimension 1242 X 724 X 55.1Min ( 37 ) . ( Make: Sony / Lg / Samsung ) . 230 Supply And Fixing Of Outdoor4x6pvc Box With 102Mm X 77Mm X 102Mm With All Fixing Accessories. 231 Supply And Clamping Of Cat 6 Armoured Cable In Suitable Pvcpipe 1 Thick On Wall / Ceiling With Connected Pvc Accessories With Clamps, Saddles Etc., Complete. ( Between Ethernet Switch To Camera And Radio Modem ) I. Application : Primary ( Campus ) , Secondary ( Riser ) , Tertiary ( Horizontal ) Ieee 802.3 : 10Base-T; 100Base-T; 1000Base-Tieee 802.5 16 Mb; Isdn; Tpddi; Atmii. Standards: Iso / Iec 11801 2Nd Ed.; Iec 61156-5 2Nd En 50173-1; En 50288-6-1, Eia / Tia 568C.2, Rohs Compliant.Fire Rating: Pvc : Iec 60332-1.Iii. Conductor - Bare Copper Wireiv. Insulation - Polyethylene V. Twisting - 2 Cores To The Pair Vi. Cable Lay Up - 4 Core To The Pair It Has Diameter Of ( 23 Awg ) 0.550 ± 0.015.Insulation : Polyethylene.Gi Wire Of Size Is 0.90 ± 0.030Mm. 232 Fixing And Termination Of Cat 6 Cable Rj 45Jack Single Point ( Point To Point ) Crimping, Testing And Arrangement Charges. 233 Supply, Run, Testing And Commissioning Of2 Run X 2.5 Sqmm And 1R Of 1.5Sq Sqmm Pvc Insulated Sc Unsheathedof 1100V Grade In Suitable Pac Conduit Pipe Onconcealed Wall And Ceiling With Continuous Earth Wire Connection With Painting Of Suitable Colour. 234 Supply And Fixing Of Poe 24 Port Switch10 / 100 / 1000 Base -T / 2 X 1000Base-Fx / 20Gbps Bandwidth / Ieee803.Af / At Compliant Poe+ / Rj45 Supports Auto Mdi / Mdi-X Function / Auto Negotiation Speed, Half / Full-Duplex / Store And Forward / Max Packet Size: 10Kbytes / Wide Range Power Design ( 12~56Vdc ) / Operating Temperature ( -40 °C ~ +75 °C ) / Reverse Polarity Protection / Resettable Fuse To Protect Against Overcurrent / Ip-40 Protection / Eft Protection For Power Line. 235 Supply And Fixing Of Poe 8 Port Switch10 / 100 / 1000 Base -T / 2 X 1000Base-Fx / 20Gbps Bandwidth / Ieee803.Af / At Compliant Poe+ / Rj45 Supports Auto Mdi / Mdi-X Function / Auto Negotiation Speed, Half / Full-Duplex / Store And Forward / Max Packet Size: 10Kbytes / Wide Range Power Design ( 12~56Vdc ) / Operating Temperature ( -40 °C ~ +75 °C ) / Reverse Polarity Protection / Resettable Fuse To Protect Against Overcurrent / Ip-40 Protection / Eft Protection For Power Line. ( Make: Dlink, Netgear / Tplink ) 236 Supply And Fixing Of Out Door Weather Proof Box 2Ft X 2Ft Out Door Weather Proof Box 2Ft X 2Ft 237 Supply And Fixing Of Rack With Accessories -Higher End 42 U Rack With Lns Unit And Fan Extra For The Above Rack. 238 Supply And Fixing Of 2 Feet Cctv Camera Stand With Attachment Fittings As Follows:* Weather Heads And Couplings * Cabinet Mounting Fittings, Plates, Brackets As Needed. * Reinforced Couplings For Wire Entrances To Cabinets. 239 Supply And Installation For 2Kva Ups With Battery, Single Phase Ups ( Single Phase In & Single Phase Out ) Capacity - System With Battery - 2Hours Back Up 240 Supply And Installation For 1Kva Ups With Battery, Single Phase Ups ( Single Phase In & Single Phase Out ) Capacity - System With Battery - 1 Hours Back Up 241 Of 6Mlengthpole With Base Plate Of Size 250X250x6mm As Per Is-875 With Following Specification. Pole Outer Die -76.10Mm X 3.65Mm Thick X 6 Meter. 242 Supply And Filling In Foundation And Basement With M Sand / Filling Sand In Layers Of Not More Than 15Cm Thick Well Watered, Rammed And Consolidated Etc., Complete As Per Standard Specification. 243 Providing And Relaying Plain Cement Concrete 1:2:4 ( One Cement Two Sand And Ten Broken Machine Crushed Stone Jelly ) Using Hbg Machine Crushed Stone Jelly Of Size 20Mm Gauge For Founding And Basement Including De-Watering If Found Necessary And Laid In Layers Of Not More Than 15Cms Thick Etc., Complete Complying With Standard Specification And As Directed By The Departmental Officers. 244 Pa System 245 Supply, Installation, Testing & Commissioning Of 30 Watts 2 Way High Efficiency, High Fidelity, Long Throw Ip65 Weather Proof P.A Music Horn Speaker. It Combines The High Efficiency Of Horn With Wide Frequency Response. Music Horn Is Weather Protected And Uv Protected Abs Plastic Housing Combines With The Feature Of Easy Poertap Selection On A Terminal Strip With A Two Core Cable. It Has Impedance Of 250 / 500 / 1K / 2K Ohm With Frequency Response Of 120-16000 Hertz. ( Make: Ahujaamh402t / Bosch Or Its Equivalent ) 246 Supply, Installation, Testing & Commissioning Of 240 Watts P.A Mixer Amplifier With The Output Power Of 1350 Watts Maximum, 500Watt Rms At 10% Thyristor Harmonic Distortion ( Thd ) , 850Watt Rms At 5% Thd, 800 Wattsrms At 2% Thd And The Power Supply Ac Voltage Ranging From 220-240 Volt, 50 / 60 Hertz. With The Dc Input Of 48 Volt And 1000Watts Has Tone Controls Of Bass=+- 10 Db At 100 Hz Weighing 42Kg With The Speaker Output Of2q, 4Q.70Volt&100Volt Has Power Consumption Of 1600Va Ac &12A Dc And 100Db Output Regulation At 1Khz No Load To Full Load Ratio. The Signal To Noise Ratio Is 60Db With The Input Channels Of 0.8Mv / 4.7Kq, 3*Aux 100Mv / 50Kq.The Frequency Response Of 50-15000Hz+-3Db. ( Make: Ahuja Ssa 10000 / Bosch Or Its Equivalent ) 247 Supply, Installation, Testing & Commissioning Of10 Gooseneck With Suitable Base Incorporates Separate Bush Switches For Momentary And Dynamic Microphone With 600Ohm Impedance And Has 2.5Mv / Pa Sensitivity And Frequency Response Ranging From 50-15000Hz With Multi Tone Chime Model. ( Make:-Acm66 Ahuja / Bosch / Its Equivalent ) 248 Supplyand Run Ofarmoured Speaker Cable 2 Core 2.5 Sqmm And 1R Of 1Sq Sqmm Pvc Insulated Sc Unsheathedof 1100V Grade In Suitable Pac Conduit Pipe Onconcealed Wall And Ceiling With Continuous Earth Wire Connection With Painting Of Suitable Colour. 249 Supply & Installation Of Custom Built M.S Powder Coated Wall Mounting Audio Rack With Lock & Key For Housing Of Amplifier & Player / Recorder Conforms To Eia-310, Iec-60297 And Able To Withstand The Load Of 40Kg With Welded Construction Made Up Of Crca Steel With Suitable Height, Width And Depth. 250 Supply, Installation, Testing & Commissioning Ofcordless Mic Uhf Model. ( Make:-Acm66 Ahuja / Bosch / Its Equivalent ) 251 Maintenance Of Garden For A Period Of Six Months Including All Required Materials And Man Power Etc., All Inclusive.

BRR : 1522450 Tender For Repair / Maintenance To Ht Oh Lines, Ug Cables, Transformers And Other Connected Items At Domestic And Technical Area At Afs Sarsawa Under Ge ( Af ) Sarsawa ; 1 Disconnecting Ht / Lt Cables & Earthing Connectionsof Burnt / Defective Transformer Of Capacity 50Kva To 630Kva, 11Kv / 433 Volts, 3 Phase, From Pole / Floor Mounted, Taking Down From Site Of Installation Carefuly With The Help Of Cranes And Transporting The Same To Workshop For Repair, Opening, Draining Out Transformer Oil, Dismantling Complete & Taking Out Core Assembly & Removing Burntout Windings, Cleaning / Washing Of Tank Removing The Dirt Sludge And Sticky Materials From All Parts Of The Transformerincluding Core Tank And Cooling Tubes, Removal Of Damaged Parts, Dehydrating The Core Assembly, Re-Assembling After Replacement Of Damaged Parts Of The Transformer After Repairs, Making Connections And Filling Dehydradated / Fresh Transformer Oil And Testing For All Type Of Tests ( Routine Test & Full Load Test ) Including Transportation Back & Reinstallation / Connection Of Transformer At Site Complete All As Specified & Directed..Notes:- ( I ) Spare Parts Shall Be Measured And Paid Seperately. Taking Down / Out Of Old Spare Parts Are Included In Quoted Rates If Specifically Not Otherwise Specified Here-In-After. ( Ii ) All Parts / Components Replaced Shall Be Identical To Those Specified By Original Manufacturer. ( Iii ) Winding, New Transformer Oil & Dehydration Of Old Transformer Oil Shall Be Measured & Paid Separately. ( Iv ) The Repair / Maintenance Shall Be Carried From Oem Or Authorized Agency Of Oem As Approved By The Ge. 2 M&L Winding Of Transformer Any Capcity At Lt Side With Copper Strip Of Suitable Size / Gauge, Fixing The Coil In The Position In Core Assembly And Making Connection As Per Original Pattern Including Providing Insulation, Complete All As Specified & Directed. 3 M&L Winding Of Transformer Any Capcity At Ht Side With Super Enamelled Copper Wire Of Suitable Size / Gauge, Fixing The Coil In The Position In Core Assembly And Making Connection As Per Original Pattern Including Providing Insulation, Complete All As Specified & Directed. 4 S&F Tap Changer Switch Suitable For Transformer 50Kva To 200Kva Complete All As Specified & Directed. 5 S&F Tap Changer Switch Suitable For Transformer 250Kva To 630Kva Complete All As Specified & Directed. 6 M&L Oil Temperature Gauge / Thermometer Suitable For Transformers Of Any Make, Model , Location Etc With Shape And Size As Existing At Site Complete All As Specified & Directed. 7 S&F Ht Bush Assembly Made Out Of Brass With Heavy Duty Brass Complete With Brass Spindle, Nuts, Bolts, Washers Etc Without Bushing Insulators All As Per Existing Size, Shape And Length Suitable For 50Kva To 63 Kvacapacity Transformerscomplete All As Specified & Directed.. 8 Description All As Per Boq Item No. 7.00 Here-In-Above But For 100 Kva To 200 Kvacapacity Transformers. 9 Description All As Per Boq Item No. 7.00 Here-In-Above But For 250 Kva To 630 Kvacapacity Transformers. 10 S&F Lt Bush Assembly Made Out Of Brass With Heavy Duty Brass Complete With Brass Spindle, Nuts, Bolts, Washers Etc Without Bushing Insulators All As Per Existing Size, Shape And Length Suitable For 50Kva To 63 Kvacapacity Transformerscomplete All As Specified & Directed. 11 Description All As Per Boq Item No. 10.00 Here-In-Above But For 100 Kva To 200 Kvacapacity Transformers. 12 Description All As Per Boq Item No. 10.00 Here-In-Above But For 250 Kva To 630 Kvacapacity Transformers. 13 S&F 11 Kv Porcelain Bushing Insulators For Ht Side, Outdoor / Indoor Type Transformer Of Capacity 50Kva To 63Kva As Per Is-2099 Of 1973 Complete All As Specified & Directed.. 14 Description All As Per Boq Item No. 13.00 Here-In-Above Buttransformer Of Capacity 100Kva To 200Kva 15 Description All As Per Boq Item No. 13.00 Here-In-Above Buttransformer Of Capacity 250Kva To 630Kva 16 S&F 433 Volt Porcelain Bushing Insulators For Lt Side, Outdoor / Indoor Type Transformer Of Capacity 50Kva To 63Kva Complete All As Specified & Directed.. 17 Description All As Per Boq Item No. 16.00 Here-In-Above Buttransformer Of Capacity 100Kva To 200Kva 18 Description All As Per Boq Item No. 16.00 Here-In-Above Buttransformer Of Capacity 250Kva To 630Kva 19 S&F Cork Sheet Gasket, 6 Mm Thick, Superior Quality, On Top Cover Plate Of The Transformer 50Kva To 630 Kva Complete All As Specified & Directed. 20 S&F In Replacement Gun Metal Globe Or Gate Valve 20 / 25 Mm Bore, Isi Marked, Class-2With Spindle And Iron Wheel Head, Screwed Both Ends For Iron Pipe With & Including Fittings And Fixturescomplete All As Specified & Directed. 21 Taking Down / Out Old Unservieableair Break Gang Operated Switch, Removing God Including Supply And Installing Switch Air Break Gang Operated, Triple Pole, For Horizontal Or Vertical Operation, Mechanically Operated, Mounted On 12 Insulators And Steel Frame With Operating Mechanism & Operating Rod Of 25Mm Bore, Medium Grade Gi Pipe From Ground Level With Locking Arrangements, 200 Amps Rating 11000 Volts Working Pressure Including Making Electrical Connectionsto Make It Functional After Testing Complete All As Specified & Directed. 22 S&F In Replacement Ht / Lt Side Cable Box Cover Plate Made Out Of Ms Sheet Of 16 Swg Complete With Nuts, Bolts, Washers, Gasket & Painting Suitable For Indoor / Outdoor Type Transformer Of Capacity 50Kva To 630Kva Complete All As Specified & Directed.. 23 Taking Out Breather Assembly From The Transformer Of Any Make, Capacity 50Kva To 63 Kva, Removing Of Moisturized / Unserviceablesilica Gel With And Including Supply Of New Breather Assembly And Pouring Of Silica Gel With Fresh Deep Blue Coloured Silica Gel All As Per Existing At Site Complete All As Specified & Directed.. 24 Description All As Per Boq Item No. 23.00 Here-In-Above But Capacity 100Kva To 200Kva 25 Description All As Per Boq Item No. 23.00 Here-In-Above But Capacity 250Kva To 630Kva 26 Disconnecting Of All Ht / Lt Cable & Earthing Connections Of Transformer Of Capacity 50Kva To 63Kva , 11Kv / 433Volt, 3 Phase, Any Make, From Pole / Floor With The Help Of Crane To Carryout Overhauling Of Transformer Comprising Of Following Services Complete All As Specified & Directed:- ( I ) Opening Of Top Cover, Disconnecting Winding Connection From Bushing And Taking Out Carefully Core Assembly Complete With Winding ( Ii ) Draining Out Of Transformer Oil From Chamber ( Iii ) Checking Compactness Of Core & Tightening The Same Wherever Required ( Iv ) Chemical Washing Of Winding To Remove Dirt, Dust & Carbon Particles. ( V ) Cleaning Of Oil Tank To Revmove Oil Sludge Followed By Painting Inner Surface Of Tank With Zinc Chromate Base Paint ( Vi ) Refixing Of Core & Winding Assembley And Making Connection With Ht / Lt Bushing ( Vii ) Replacement Of Worn Out Gaskets Nut / Bolts With New One. ( Viii ) Refilling The Transformer Oil After Filtering / Dehyderation Or Filling New Transformer Oil. ( Ix ) Satisfactory Testing Of Transformer On Full Load.Note: ( I ) The New Transformer Oil & Dehydration Of Transformer Oil Shall Be Measured & Paid Sepratrly. ( Ii ) The Repair / Maintenance Shall Be Carried From Oem Or Authorized Agency Of Oem As Approved By The Ge. 27 Description All As Per Boq Item No. 26.00 Here-In-Above But Transformer Of Capacity 100Kva To 200Kva 28 Description All As Per Boq Item No. 26.00 Here-In-Above But Transformer Of Capacity 250Kva To 630Kva 29 Dehydration / Centrifuging Transformer Oil By Means Ultra High Vaccum Double Stage Machine To Remove Impurities From Oil Such As Moisture, Dirt, Air And Other Gases At Site Of Installation In Running Condition Of Transformer Including Testing The Oil Before And After Centrifuging From Top And Bottom Of Transformer To Achieve The Bdv Value More Than 45Kv ( Rms ) At 2.5Mm Air Gap Complete All As Specified & Directed..Note:- ( I ) Oil Test Value Record Register Shall Be Prepared In Presence Of Engineer-In-Charge / Jeand Handed Over The Register To Sub Division On Completion Of Work. ( Ii ) The Contractor Is Required To Submit The Di-Electric Repot After Dehydration And Filtration Of Each Transformer Before Claiming Payment. 30 Supply Only Transformer Oil Of Dielectric Strength Not Less Than 45 Bdv To Comply Is-335 Of 1993 In Company Sealed Barrels Complete All As Specified & Directed.Note:- Empty Container Shall Be Returned To Contractor After Use Of Oil. 31 Preparation Of External Surfaces Of Transformer Of Capacity 50Kva To 200 Kva For Paintingincluding Fins / Radiators, Removal Of All Rust / Oil / Grease And Unwanted Material And Applying Two Coats Of Synthetic Enamel Metallic Paint, Smoke Grey, By Means Of Spray Gun At Site Of Installation Of Transformer Including Writing Sm / Mes Number, Capacity Of Transformer Etc With Black Synthetic Enamel Paint Complete All As Specified & Directed. 32 Description All As Per Boq Item No. 31.00 Here-In-Above But Transformer Of Capacity 250Kva To 315Kva. 33 Description All As Per Boq Item No. 31.00 Here-In-Above But Transformer Of Capacity 400Kva To 630Kva. 34 M&L Cleaning And Preparation Of Surfaces Of Ht Steel Tubular Poles ( Six Pole Structure Having Channels Upto 54 Nos. Of Length Upto 2.5Mtr, Various Angle, Clamps, Anticlimb Device ) With Emery Paper, Filling The Voids With Suitable Filler Materials And Applying Two Coats Of Aluminium Paint Over & Including One Coat Of Zinc Oxide Primer To Poles, Cross Arms, Brackets, Hooks, Junction Box, Stay Clamps With And Including Making Blue & White Strip 30Cm Wide ( 5 Nos ) Upto 1.5 Mtr From Pcc Coping And Marking The Numbering On Poles With Synthetic Enamel Paint Complete All As Specified & Directed. 35 M&L Cleaning And Preparation Of Surfaces Of Ht Steel Tubular Poles ( Four Pole Structure Having Channels Upto 28 Nos. Of Length Upto 2.5Mtr, Various Angle, Clamps, Anticlimb Device ) With Emery Paper, Filling The Voids With Suitable Filler Materials And Applying Two Coats Of Aluminium Paint Over & Including One Coat Of Zinc Oxide Primer To Poles, Cross Arms, Brackets, Hooks, Junction Box, Stay Clamps With And Including Making Blue & White Strip 30Cm Wide ( 5 Nos ) Upto 1.5 Mtr From Pcc Coping And Marking The Numbering On Poles With Synthetic Enamel Paint Complete All As Specified & Directed. 36 M&L Cleaning And Preparation Of Surfaces Of Ht Steel Tubular Poles ( Two Pole Structure Having Channels Upto 07 Nos. Of Length Upto 2.5Mtr, Various Angle, Clamps, Anticlimb Device ) With Emery Paper, Filling The Voids With Suitable Filler Materials And Applying Two Coats Of Aluminium Paint Over & Including One Coat Of Zinc Oxide Primer To Poles, Cross Arms, Brackets, Hooks, Junction Box, Stay Clamps With And Including Making Blue & White Strip 30Cm Wide ( 5 Nos ) Upto 1.5 Mtr From Pcc Coping And Marking The Numbering On Poles With Synthetic Enamel Paint Complete All As Specified & Directed. 37 M&L Cleaning And Preparation Of Surfaces Of Ht Pcc Poles ( Four Pole Structure Having Channels Upto 28 Nos. Of Length Upto 2.5 Mtr ) And Applying Two Coats Of Exterior Cement Base Paint Over & Including One Coat Of Primer To Poles And Applying Two Coats Of Aluminium Paint Over & Including One Coat Of Red Oxide Primer To Cross Arms, Brackets, Hooks, Junction Box, Stay Clamps, And Making Blue & White Strip 30Cm Wide ( 5 Nos ) Upto 1.5 Mtr From Pcc Coping And Marking The Numbering On Poles With Synthetic Enamel Paint Complete All As Specified & Directed. 38 M&L Cleaning And Preparation Of Surfaces Of Ht Pcc Poles ( Two Pole Structure Having Channels Upto 07 Nos. Of Length Upto 2.5 Mtr ) And Applying Two Coats Of Exterior Cement Base Paint Over & Including One Coat Of Primer To Poles And Applying Two Coats Of Aluminium Paint Over & Including One Coat Of Red Oxide Primer To Cross Arms, Brackets, Hooks, Junction Box, Stay Clamps, And Making Blue & White Strip 30Cm Wide ( 5 Nos ) Upto 1.5 Mtr From Pcc Coping And Marking The Numbering On Poles With Synthetic Enamel Paint Complete All As Specified & Directed. 39 M&L Cleaning And Preparation Of Surfaces Of Angle Iron By Emmery Paper And Applying Two Coats Of Synthetic Enamel Paint Over & Including One Coat Of Zinc Oxide Primer To Angle Iron And Two Coats Ofaluminium Paint To Chain Link Fencing Around The Transformer Yards With And Including Applying Two Coats Of Exterior Cement Base Paint To External Surfaces Of TransformerS Platform Including Stairs Etccomplete All As Specified & Directed.. 40 M&L Cleaning And Prepartion All Metal Parts Of 33 / 11 Kv Main Receiving Station And Applying Two Coats Of Aluminium Paint Over & Including One Coat Of Zinc Oxide Primer Including Painting To CtS / Gods, Chain Link Fencing, Angle Iron Posts Around The Transformer Yards With And Including Two Coats Of Exterior Cement Base Paint To External Surfaces Of TransformerS Platform Including Fire Walls Etccomplete All As Specified & Directed. 41 Supply, Laying, Jointing, Testing & Commissioning In Replacement Ht Xlpe Cable ( Heavy Duty ) , 11000 Volts ( Earthed ) , Cross Sectional Area 95 Sqmm, 3 Core, Insulated, Screened, Sound Compacted Aluminium Conductor, Screening With Extruded Semi Conducting Layers, Insulation Screening With Copper Tape Covers Laid Up With Pvc ( St-2 ) , Extruded Inner Sheathed Gi Strip Armoured Pvc ( St-2 ) Out Sheathed, Isi Marked With Is-7098 Part Ii With Amendment Upto Date, Laid In Trenches / Pipes / Ducts Or Fixed Along Poles / Walls Etc Complete All As Specified & Directed.. Notes:- ( I ) Cable Shall Be Of Manufacturing Date Not Earlier Than Jul 2023. All The Cable Shall Be Embossed With Year Of Manufacturing, Meterage At Every Metre, In Addition To Its Own Standard Markings As Per Is I.E. Size, Voltage Etc. ( Ii ) Excavation & Earth Work, Sand Cushioning, Protection Pipes, End Termination Joints & Protection Covers Shall Be Measuredand Paid Separately. 42 Excavation In Trenches, Not Exceeding 1.5Mtr Wide & Not Exceeding 1.5Mtr In Depth; For Foundation, Laying / Taking Out Pipes / Cables Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. Not Exceeding 10Sqm On Plan & Not Exceeding 1.5Mtr In Depth And Getting Out, In Any Type Of Soil Complete All As Specified & Directed. 43 Excavation In Trenches, Not Exceeding 1.5Mtr Wide And Exceeding 1.5 Mtr But Not Exceeding 3.0 Mtr In Depth; For Foundation, Laying / Taking Out Pipes / Cables Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. Not Exceeding 10Sqm On Plan And Exceeding 1.5 Mtr But Not Exceeding 3.0 Mtr In Depth And Getting Out, In Any Type Of Soil Complete All As Specified & Directed. 44 Returning Filling In Including Spreading Leveling Watering And Well Ramming In Layers Not Exceeding 25Cm Thick Each In Any Type Of Soil Complete All As Specified & Directed. 45 Removal Of Excavatedsurplus Soil To A Distance Not Exceeding 50 Mtr & Depositing Where Directed At A Level Not Exceeding 1.5 Mtr Above The Starting Point Complete All As Specified & Directed. 46 M&Lun-Reinforced Precast Concrete Cable Cover, Class Hv Type-1, Flat, Size 300Mm X 180Mm X 40Mm, Laid Flatfor Protection Of Cable, Adjacent To Each Other, Perpendicular To Central Axis Of Cable Complete All As Specified & Directed. 47 M&Lsand Cushioning With Fine Dry Sand To Cable With A Layer Of Sand 8 Cm Thick Before Laying The Cable And 15 Cmthick After Laying The Cable ( Punned Down To 18 Cm Thick After Laying And Stretching Of Cable ) Complete All As Specified & Directed. 48 S&F In Replacement Cable Route Indicator, Showing Mes Ht Under Ground Cable And Arrow Mark Painted With Two Coat Synthetic Enamel Paint Over & Including One Coat Of Zinc Oxide Primer, Made Out Of Ms Plate Of Size 200Mm X 200Mm, 6Mm Thick Fixed On Ms Flat Of Size 25Mm X 4Mm, 600Mm Long, Including Cutting, Chasing, Drilling, Welding Etc. ( Whichever Required ) And Embedded In Pcc Block 1:3:6, Type C-2 Of Size 30Cm X 30Cm X 30Cm In The Ground Including Excavation And Earth Work Complete All As Specified & Directed.Note: Excavation & Earthwork And Pcc Work Included In Quoted Rates. 49 M&Lin Replacement Double Wall Corrugated ( Dwc ) Hdpe Pipe Outer Dia 90Mm & Inner Dia 75Mm As Per Is 14930 ( Part-2 ) :2001 With End Cap Laid As In Trenches / Under Road / Under Floor Or Fixed To Wall / Pole With Fixing Arrangement With Suitable Size Of Ms Clamps For Cable Protectioncomplete All As Specified & Directed. . 50 S&F In Replacement Cable Jointing Kitfor 11000 Voltearthed Grade, Straight Through, Heat Shrinkable Type Joints With Jointing Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size95sqmm Complete All As Specified & Directed. 51 S&F In Replacement Cable Jointing Kitfor 11000 Voltearthed Grade, Outdoor Type, End Termination Heat Shrinkable Type Joints With Jointing Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size 50Sqmm To 95Sqmm Complete All As Specified & Directed.. 52 S&F In Replacement Cable Jointing Kitfor 11000 Voltearthed Grade, Indoor Type, End Termination Heat Shrinkable Type Joints With Jointing Material And Accessories Suitable For 3 Core Xlpe Armoured Aluminium Conductor Cable Of Size 50Sqmm To 95Sqmm Complete All As Specified & Directed. 53 Cutting The Worn Out / Unserviceable Lugs From The Cables Of Size Upto 50 Sqmm Size With And Including Supply & Fixing Lugs After Cutting The Worn Out / Faulty Cable End Fromht / Lt Side Of Transformer / Lt Pillar / Panel Box Including Necessary Earth Work For Taking Out The Cable From Loop, Returning Fillingetc And Providing Aluminium Lugs Lead Including Crimping With Crimping Tools In The Existing Lt Cable And Making Necessary Connections To Make It Functional Complete All Asspecified & Directed. 54 Description All As Per Boq Item No. 53.00 Here-In-Above Butcables Of Size 70 Sqmm To 120 Sqmm. 55 Description All As Per Boq Item No. 53.00 Here-In-Above Butcables Of Size 150 Sqmm To 185 Sqmm 56 Description All As Per Boq Item No. 53.00 Here-In-Above Butcables Of Size 240 Sqmm To 300 Sqmm 57 S&F Composite Polymer 11 Kv, Pin Insulator Alongwith Pin 260 Mm Long Creepage Distance 320 Mm Pf Dry / Wet Withstand Voltage Kv / Mint 65 / 40 After Taking Down / Out Insulator As Existing At Site Complete All As Specified & Directed.. 58 S&F Pin Type Insulator Capacity 33000Volt After Taking Down / Out Insulatoras Existing At Site Complete All As Specified & Directed.. 59 S&F In Replacement Ht Lightning Arresters For Outdoor Use, Non-Liner Resistor Type, Horn Gap And Choking Coil, Maximum Working Pressure 11000 Volts, Transmission Class, Discharge Capacity 65 Kiloampere Complete All As Specified & Directed.. 60 M&L Defect Rectificatoin Of Ht 11 Kv Cable Laidin Trenches By Locating Fault With The Help Of Electronic Fault Locating Machine Comprising Of Surge Generator Pulse, Cable Route Tracer, Echo Fault Locator With Hight Frequency Distance Calculator Etc Including And Additional Excavation In Normal Alluvial Strata Required For Exposing The Cable Fault, Removal Of Deteriorated Potion Of Cable, Treating Of Cable And Keeping The Same Ready For Jointing Work For Cable Of Size Up To 185 Sqmm 3 Core Complete All As Specified & Directed.Note: The Fault Locating Equipments Will Be Brought To Site Within 24 Hours Of Instruction From Engineer-In-Charge. S&F Of Cable Joints Shall Be Measured & Paid Seperately. 61 S&F In Replacement 33Kv, 10 To 25 Amp, Do Fuse Complete All As Specified & Directed. 62 S&F In Replacement 33 Kv, 30 Amp, Do Fuse Complete All As Specified & Directed.. 63 S&F In Replacement 33 Kv, 40 Amp, Do Fuse Complete All As Specified & Directed.. 64 S&F In Replacement 11Kv, 10 To 25 Amp, Do Fuse Complete All As Specified & Directed. 65 S&F In Replacement 11Kv, 30 Amp, Do Fuse Complete All As Specified & Directed.. 66 S&F In Replacement 11Kv, 40 Amp, Do Fuse Complete All As Specified & Directed.. 67 M&L In Replacement True Vertical Steel Tubular, Swaged Welded Pole Conforming To Is-2713 Part Ii , Type 410 Sp 55, 11 Metre Long Complete With Mild Steel Base Plate Of 6 Mm Thick Of Size 300Mm X 300Mm, Finial Taper Plug, Cap, Bolts, Nuts, Washer And Screws Hole Of Required Size And Nos. For Fixing Cross Arms Including Painting Externally With Two Coats Of Aluminium Paint Over & Including One Coat Of Zinc Oxide Primer For Exposed Surface And Two Coats Of Black Bituminious Paint For Embeded Portionin Concrete As Well As Throughout Internally Including Provision Of White & Blue Colour Strips With Fluorescent Paint Upto 1.5 Mtr Height & Nubmering Of Pole Complete All As Specified & Directed..Note:-Excavation, Earth Workandpccshall Be Measured And Paid Separately. 68 M&L Plain Cement Concrete ( Pcc ) 1:4:8, Type D-2 Using 40 Mm Graded Mechanically Crushed Stone Aggregates As In Foundations, Filling And Mass Concrete Etc Complete All As Specified & Directed. 69 M&L Plain Cement Concrete ( Pcc ) 1:3:6, Type C-2, Using40 Mm Graded Mechanically Crushed Stone Aggregates As In Foundations, Filling And Mass Concrete Etc Complete All As Specified & Directed. 70 M&L Plain Cement Concrete ( Pcc ) 1:2:4, Type B-1, Using20 Mm Graded Mechanically Crushed Stone Aggregates As In Coping To Pole / Stay / Panel Etcincluding Necessary Formwork To Exposed Surface Finished Even & Smooth Complete All As Specified &Directed. 71 S&F Aluminum Conductor Steel Reinforced ( Acsr ) Any Typeweasel, Beaver, Ferret, Mink Including Stretching On Insulators With Aluminium Taps, Jumping, Binding On Poles With Minimum Sag Including Binding Wire, Jointing Sleeves, And Pg Clamps Ofsuitable Size Including Dismantling Of Old Acsr As Existing At Site Complete All As Specified & Directed.Notes :-The Rates Quoted Includes ( I ) Jumper Oncutout Point, 2 Pole / 4 Pole Structureshall Be Provided With Pvc Sleeves . ( Ii ) Cutting Of Branches Of Trees Coming Across The Oh Line. 72 S&F Cross Arms, Bracings, Supports, Clamps And Back Plates Fabricated From Structural Steel Sections Including Nuts, Bolts, Washers, Welding, Bending Cold Or Hot, Drilling Holes For Bolts, In Any Shape Or Size As Indicated Or Directed And Applying Two Coats Of Aluminium Paintover & Including One Coat Of Zinc Oxide Primerincluding Dismantling Of Old Unserviceable Cross Arm As Existing Complete All As Specified & Directed.. 73 S&F Anti Climbing Device , Spikes Type Fabricated Out Of Ms Bars , Round Square And Flat With And Including Providing Required Nuts , Bolts, Washers Etc., Welding In Two Halves, Made To Shape, To Suit The Cross Section Of The Pole And Applying Two Coats Of Aluminium Paint Over & Including One Coat Of Zinc Oxide Including Dismantling Of Old Unserviceable Climbing Device As Existing Complete All As Specified & Directed. 74 M&L In Replacement Danger Notice Plate Of 1.6 Mm Thick Mild Steel Sheet, Vitreous Enamelled White, With Letters , Figures And Conventional Skull And Bones In Signal Red Colour, Fixed With Ms Clamps , Bolts And Nuts, For Ht Of 25 Cm X 20 Cm Size As Per Ssr Part-I 2009 Complete All As Specified & Directed.. 75 S&Fin Replacement Cast Resin Cts Ratio 60-30 / 5 A +5, Class I, 26.3 Ka, Type Ectt 3, ( Set Of Three ) For Out Going Feeders Complete All As Specified Directed. 76 S&Fin Replacement Cast Resin Ctsratio 100-50 / 5 A +5 Class I, 26.3 Ka, Type Ectt 3 ( Set Of Three ) For Out Going Feeders Complete All As Specified & Directed.. 77 S&F In Replacement 11 Kv, Single Phase, Indoor Resin Cast, Pt Of Ratio 11 Kv / Rt 3 / 110V / Rt 3 / 110V / Rt 3, Class 0.5-3, Burden 50 Va - 50 Va, Insulation Level 28 / 75 Kv, Voltage Factor 1.2 Cont And 1.9 For 30 Sec, ( Set Of Three ) Conforming To Is-3156 Complete All As Specified & Directed. 78 S&F 3 Phase Over Current And Earth Fault Relay With Instantanteous High Set Functions After Taking Down / Out Relayas Existing At Site Complete All As Specified & Directed.. Make: L&T Model No Mc61a-Nxor Equivalent In Legrand And Crompton Greaves. 79 Labour For Augering Upto 100Mm Bore For Road Crossing 3 Mtr To 10 Mtr ( In Length ) Not Exceeding 1.5 Mtr In Depth For Laying Of Electric Cable And Gi Tubing In Soft / Loose Soil Complete All As Specified. 80 Supply, Installation, Testing & Commisioning Outdoor Type Feeder Pillar Box Suitable For 11 Kv, Made Out Of 3.15Mm Thick Ms Sheet, Powder Coated, Dust And Vermin Proof With Rain Water Protection, Double Door Type With Locking Arrangements Of Size 1.2Mtr X 1.2Mtr X 0.6Mtr ( Minimum ) With Provision Of Ht 11 Kv Post Insulators. 3 Nos Fixed Inside With Suitable Size Of Copper Busbars For Cable Connections And Danger Notice Plate, Panel To Be Fixed At 45Cm Above Ground Level On Brick Masonry Plateform Including 75Mm Thick Pcc ( 1.3.6 ) , Type C1 ( Using 20 Mm Graded Stone Aggregates ) Around The Area Upto 1.5Mtr In All Directions From The Panel, Cable Joints Inside The Panel Provided With Suitable Insulators And Copper Bus Bars Inlcuding Dismantling Of Old Feeder Pillar Box As Existing At Site Complete All As Specified & Directed. 81 S&F In Replacement Post Insulator 11 Kv Porcelain Typesuitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 82 S&F In Replacement Male Contact Blade Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 83 S&F In Replacement Moving Contact Blade Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 84 S&F In Replacement Female Contact Jaw Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 85 S&F In Replacement Fix Contact Jaw Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 86 S&F In Replacement Tinned Copper Flexible Jumper 200 Ampsuitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 87 S&F In Replacement Ms Jumper Carriersuitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 88 S&F In Replacement Back Connector Plate Suitable For 11Kv Godat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 89 S&F In Replacement Operating Lever Made Of Msfor Verticle Mounting Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 90 S&F In Replacement Operating Gi Pipe Medium Grade 25 Mm Bore Length 5 Mtrsuitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 91 S&F In Replacement Arcing Horn Made Of Mild Steel Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 92 S&F In Replacement Terminal Pad Made Of Copper Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 93 S&F In Replacement Contact Pressure Leaf Strips Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 94 S&F In Replacement Phase Coupler Rodsuitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 95 S&F In Replacement Spring With Teflon Insert Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 96 S&F In Replacement Terminal Connector With Bimetallic Strip Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 97 S&F In Replacement Fuse Elements Suitable For 11Kv Gooat 2 Pole / 4 Pole Structure Complete All As Specified & Directed. 98 M&L In Replacement Earthing Complete With Galvanized Steel Earth Plate Electrode 60 Cm X 60 Cm, 6Mm Thick Thick Buried Vertically In Ground To Depth Not Less Than 2.25 Mtr Below Ground Level, With Top Edge Of Earth Plate Not Less Than 1.5 Mtr Below Ground Level, Connected To Gi Earth Lead Strip 32Mm X6mm Upto 7.5 Mtr Long By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanized Iron And Connection To Earthing Test Point& Earth Dolly & Gi Pipe Medium Grade 20 Mm Bore 1.5 Mtr Long For Watering Including Gi Pipe Medium Grade 40Mm Bore Upto 7.5 Mtr Long For Protection Of Earth Lead, Wire Mesh, Funnel, Lugs, Salt, Charcoal Dust, Excavation & Earthwork In Soft / Losse Soil And Refilling Pit Chamber With Pcc 1:3:6 Type C1 Using 20 Mm Graded Mechnically Crushed Stone Aggregates , Rcc 1:2:4 Type B-1 Using 20 Mm Graded Mechnically Crushed Stone Aggregates Pit Cover Slab 40Mm Thick Reinforced With 8 Mm Dia Tmt Bars @ 15Cm C / C Both Ways Including Necessary Form Work All As Shown In Electrical Plate No 3 Of Ssr Part-I, Including Testing On Completion At Site Complete All As Specified & Directed. Notes:- ( I ) Any Variation In Length Of Earth Lead And Protection Pipe Of Earth Lead Shall Be Measured & Paid Seperately. ( Ii ) On Testing If The Desired Earth Resistance Is Not Obtained, Earthing Will Be Generated At No Extra Cost, Till The Desired Earth Resistance Is Obtained. ( Iii ) The Chamber Shall Be Constructed Atleast 1.5 Mtr Away From The Earth Electrode. 99 S&F In Replacement 32Mm X 6Mm Gi Strip In Short Pieces On Surface Or In Recess For All Interconnecting Complete All As Specified & Directed. 100 M&L In Replacement Gi Pipe Medium Grade Of Size 80 Mm Bore With All Fittings Such As Socket, Union Etc Complete All As Specified And Directed. 101 Supplying, Laying, Jointing, Testing & Commissioning Under Ground Xlpelt Electric Cable 1100 Volts Grade, Heavy Duty, Pvc Insulatedand Sheathed Armoued Electric Power Cable With Stranded Aluminium Conductor Of Cross Sectional Area 150 Sqmm 4 Core Conforming To Is- 7098 ( Part-I ) 1988 Laid As In Trenches Or Fixed Along The Wall / Pole Through Pipe Etc. Including Taking Down / Out Old Unserviceable Lt Cable Any Size Complete All As Specified & Directed. 102 Description All As Per Boq Item No. 101.00 Here-In-Above But Cross Sectional Area 185 Sqmm 3.5 Core. 103 M&L In Replacement Cable Endjoints Heat Shrinkable Type For Xlpe / Pvc Insulated And Sheathed Aluminium Conductor Cable 1100 Volts 3.5 / 4 Core, Cross Sectional Area 70 Sqmm To 120 Sqmm & Testing After Jointing Complete All As Specified & Directed. 104 Description All As Per Boq Item No. 103.00 Here-In-Above But Cross Sectional Area 150Sqmm To 185Sqmm . 105 Description All As Per Boq Item No. 103.00 Here-In-Above But Cross Sectional Area 240Sqmm To 300Sqmm . 106 Supply & Laying Old Size, Common Burnt Clay, Sub Class B Bricks, Designation 75, Laid Flat & Dryfor Protection Of Electric Cable In Trenches, Adjacent To Each Other, Perpendicular To Central Axis Of Electric Cable Complete All As Specified & Directed. 107 Supply Only White Grase Complete All As Specified & Directed. 108 Disconecting Primary & Secondary Side Cable And Earthing Connections Of Transformers Of Capacity Upto630 Kva , 11Kv / 433 Volts 3 Phase And Shifting To Open Space Within The Yard With The Help Of Crane For Repair / Increase Of Transformer Plinth Foundation Pcc Height And Shifting Back Of Transformer After Proper Curing Of Pcc Work Of Foundation Making Cable Connection All As Per Original Complete All As Specified & Directed.Note:- Pcc / Brick Work Etc. Will Be Measured & Paid Saperately. 109 M&L Consolidated Broken Stone Or Boulders Hardcore Of Gauge Not Exceeding 63Mm, Deposited, Spread And Levelled In Layers Not Exceeding 15Cm Thick Each, Watered And Rammed To A True Surfacecomplete All As Specified & Directed. 110 M&L Brick Work With Sub Class B, Burnt Clay Bricks Of Old Size, Designation 75, Straight Or Curved On Plan Exceeding 6 Mtr Mean Radius, Built In Cement Mortar 1:6 Complete All As Specified & Directed. 111 For Credit Schedule Refer Tender Documents. The Amount Of Credit Schedule Shall Be Deducted From Total Quoted Amount Of Boq To Arrive Contract Sum.