BRR : 2850891 Supply , Installation , Testing And Commissioning With Five Year Comprehensive Maintenance Contract Of Led Tube-Lights , Led Lamp/ Bulb And Bee 5 Star Rated Energy Efficient Ceiling Fans In 100 Government Schools In The State Of Maharashtra , Supply , Installation , Testing And Commissioning With Five-Year Comprehensive Maintenance Contract Of Energy Efficient Equipments/Appliances I . E . Led Tube Lights / Led Bulbs & Bee 5 Star Rated Ceiling Fans In 100 Government Schools , Supplying & Erecting Ready To Use Retrofit T8 20W Led Tube Light With Polycarbonate Body , Heat Sink , Integrated Hf Electronic Driver Complete & Compatible To T8 / T12 Led Luminaire By Disconnecting Starter & Ballast If Necessary , Complying With Technical Specifications As Mentioned In Section Iv Of Tender Document . , Supplying & Erecting 12W , 230V Integral Type Led Lamp Suitable For B-22/E-27 Base , Complying With Technical Specifications As Mentioned In Section Iv Of Tender Document . , Supplying & Erecting Bee 5 Star Rated Brushless Dc ( Bldc ) Fans All With Accessories And Complying With Technical Specifications As Mentioned In Section Iv Of Tender Document .

BRR : 3136444 Tender No. E-4241 / Hbpcl / Pc / Installation Testing And Commissioning Of Integrated Digital Operation Theater With All Equipment And Surgical Intensive Care Unit ( 17 Beds ) And Surgical Post And Recovery Unit ) 17 Beds ) With Turnkey Based ( 3 Modular Ot Pl Tender No. E-4241 / Hbpcl / Pc / Installation Testing And Commissioning Of Integrated Digital Operation Theater With All Equipment And Surgical Intensive Care Unit ( 17 Beds ) And Surgical Post And Recovery Unit ) 17 Beds ) With Turnkey Based ( 3 Modular Ot Pl , Name Of The Item : , Wall & Ceiling System In Operation Theatre Complex: - Supply, Installation, Testing & Commissioning Of Wall Panels In Operation Theatre As Per Tender Technical Specification & This Boq , Wall & Ceiling System In Operation Theatre Complex: - Supply, Installation, Testing & Commissioning Of Ceiling System In Operation Theatre As Per Tender Technical Specification & This Boq , Wall & Ceiling System In Operation Theatre Complex: - Supply, Installation, Testing & Commissioning Of Wall Panels In Corridor, Scrub Area, Surgeon Room And Server Room As Per Technical Specification & This Boq , Wall & Ceiling System In Operation Theatre Complex: - Supply, Installation, Testing & Commissioning Of Ceiling System In Corridor, Scrub Area, Surgeon Room And Server Room As Pe R Technical Specification & This Boq , Flooring : - Supply, Installation, Testing & Commissioning Of Antistatic & Conductive Flooring In Operation Theatre As Per Tender Technical Specification & This Boq , Flooring: - Supply, Installation, Testing & Commissioning Of Homogeneous Flooring Corridor, Scrub Area, Surgeon Room And Server Room As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Laminar Air Flow Ceiling As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Exhaust Air Shaft / Cabinets As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Pressure Relief Damper As Per Tender Technical Specification & This Boq , Hospital Doors:- Supply, Installation, Testing & Commissioning Of Operation Theatres Door’S Automatic Single Leaf Lead Lined Sliding Door With Ss 304 Door Blade Surface, Each 2100 Mm X 1500 Mm As Per Tender Technical Specification & This Boq , Hospital Doors :- Supply, Installation, Testing & Commissioning Of Ss 304 Doble Leaf Door Size 1000 X 2100Mm As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Ot Touch Screen Control Panel As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Storage Cabinet System As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Ergonomic Lights As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of X-Ray Viewing System As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Magnetic Writing Board In Each Operating Theatre. It Should Be Made Of Ceramic Having Magnetic Properties And Should Be Flushed To The Wall Of The Operating Room As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Scrub Sink 2 Bay As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Pass-Through Box Of Dimension 600Mm ( Width ) X 600 Mm ( Height ) And Depth Shall Be Minimum 600 Mm As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Double Arm Ceiling Pendant For Surgeon As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Double Arm Ceiling Pendant For Anaesthesia As Per Tender Technical Specification & This Boq , Ot Lights :- Supply, Installation, Testing & Commissioning Of Double Dome Ot Light With Full Hd Camera And Third Arm For Monitor 32” 3D 4K Medical Grade Monitor As Per Tender Technical Specification & This Boq , Ot Lights :- Supply, Installation, Testing & Commissioning Of Double Dome Ot Light With Full Hd Camera And Third Arm For Monitor 27” 4K Medical Grade Monitor As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Electro Hydraulic Fully C Arm / Radiolucent Ot Table With Accessories As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Av Management And Communication System As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Digital Pacs Viewing Station 55” As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Visualization Tower For Advance Laparoscopy Surgery As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Video Laryngoscope Set As Per Tender Technical Specification & This Boq , Electrical :- Electrical Work Inside Operation Theatre As Per Tender Technical Specification & This Boq , Electrical :- Supply, Installation, Testing & Commissioning Of Distribution Board Must Be Provided Outside Of Each Ot As Per Tender Technical Specification & This Boq , Electrical :- Supply, Installation, Testing & Commissioning Of Energy Efficient Luminaire, 2 X 36 W Cfl For Corridor And Auxillary Rooms As Per Tender Technical Specification & This Boq , Electrical :- Supply, Installation, Testing & Commissioning Of Ups :10Kva On Line 30 Min Back Up As Per Tender Technical Specification & This Boq , Electrical :-Supply, Installation, Testing & Commissioning Of Isolation Power Supply With Dips System / Qips System As Per Tender Technical Specification & This Boq , Hvac :- Supply, Installation, Testing & Commissioning Of Ahu With Air Cooled Package Chiller / Condensing Units For Operation Theatre As Per Tender Technical Specification & This Boq , Hvac :- Supply, Installation, Testing & Commissioning Of Ductwork And Accessories As Per Tender Technical Specification & This Boq , Hvac :- Supply, Installation, Testing & Commissioning Of Split Air-Conditioning Units 1 Ton As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Medical Gas Piping Inside All Ot’S As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Hand Rail Crash Guard System As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Corner Guard Protection System In Ot Complex As Per Tender Technical Specification & This Boq , Site Modification- Any Minor Demolition, Reconstruction, Water Proofing, Necessary Plumbing, Anti-Microbial Painting, Replacement Of Any Door Or Windows To Provide Structured Design Within The Ot Area For Modular Ot , Wall & Ceiling System In Sicu, Post Op & Recovery Unit :- Supply, Installation, Testing & Commissioning Of Wall Panels In Sicu, Post Op & Recovery Unit As Per Tender Technical Specification & This Boq , Wall & Ceiling System In Sicu, Post Op & Recovery Unit:- Supply, Installation, Testing & Commissioning Of Ceiling System In Sicu, Post Op & Recovery Unit As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Antistatic & Conductive Flooring In Sicu, Post Op & Recovery Unit As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Ambient Lights In Sicu, Post Op & Recovery Unit As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Nursing Station ( 4000Mm X 750Mm ) As Per Tender Technical Specification & This Boq , Sliding Door :- Supply, Installation, Testing & Commissioning Of Sliding Door 1200 X 2100 Mm As Per Tender Technical Specification & This Boq , Sliding Door :- Supply, Installation, Testing & Commissioning Of Sliding Door 1500 X 2100 Mm As Per Tender Technical Specification & This Boq , Sliding Door :- Supply, Installation, Testing & Commissioning Of Sliding Door 1800 X 2100 Mm As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Single Leaf Door Size 900 X 2100Mm As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Horizontal Head Panel-1200Mm Up To 2 Gas Outlets, 1500Mm For Up To 4 / 5Outlets Configuration And 1800Mm For 6 / 8 Outlet Configurations Along With Electrical Switches. , Sitc Of Hospital Nurse Call System :- Sitc Of Vde 0834 Certified / Approved System Switch The System Switch Forms A Decentralised Communications Node For Exchanging Data Between The Connected System Devices And The Rest Of The Communications System, Consisting Of : - 1 X Rj45 Socket, 100Mb Ip Port ( Ieee802.3100Basetx ) , Galvanically Isolated Conforming Toen 60950 And Vde 0834; - 7 X Rj45 Sockets, Each For A 100Mb Ip System Port ( Ieee802.3 100Basetx ) For Connecting All Ip Capable System Modules; - 1 X Rj45 Socket, 100Mb Ip Port ( Ieee802.3100Basetx ) For Connecting Communications, Staff And Ward Terminals As Well As Control Panel Pcsor For Redundant Connection. - Control Leds For Indicating The Current Operating State; - 2 X Rj45 Sockets For Connection Of The Externaldata Bus; - All Ip System Modules Are Supplied With Power Usingpower Over Lan Technology; - In Case Of Failure Ofsystem Switch Not More Then 20 Rooms Or 30 Beds Should Be Affected. , Sitc Of Hospital Nurse Call System :- Sitc Of Vde 0834 Certified / Approved Patient Handset - Without Speech Consisting Of A Plastic Case In Antimicrobial Finish Having - Call Button With Nurse Symbol With Integrated Finder And Reassurance Light On The Top End Of The Unit, - Membrane Keypad In Antimicrobial Finish With Integrated Leds For Operation, Consisting Of: -1 Call Key, - 2 Lighting Keys - 2.80 Metre Connection Cable With Auto-Disconnecting Rj45 Connector Plug. It Shall Be Supplied With Cradle For Holding Patient Terminals. , Sitc Of Hospital Nurse Call System :- Supply Of Vde 0834 Certified / Approved Connection Module For Patient Terminal-Without Speech Connection Module For Patient Handset Shall Consist Of: - 1 X Rj45 Socket Marked In Colour And With Measures To Ensure That The Push Button Is Correctly Connected, Including Auto Disconnect Mechanism, - 1 Membrane Keypad With: - 1 Call Button ( Red With Nurse Symbol ) Including A Finder / Reassurance Light, - 1 Presence Key / Cancel Button ( Green ) Including A Control Led, , Sitc Of Hospital Nurse Call System :- Supply Of Vde 0834 Certified / Approved Code Blue Call Vde 0834 Complied Pull Cord Shall Consist Of : - Antimicrobial Membrane Keypad With 1 Code Blue Call Button ( Blue ) Incl. Finder . Reassurance Light And 1 Cancel Button Incl. Control Led, - Integrated Piezo Buzzer - 2 X Rj45 Sockets For Connecting To The Io Bus - Incl. An Installation Frame For Screw-Free Attachment With Countersunk Backbox , Sitc Of Hospital Nurse Call System :- Sitc Of Module Providing Dvi Output Module To Provide Dvi Output To Connect With Any 3Rd Party Lcd / Led Monitor To Display Nurse Call Notification On External Led / Lcd Screen. ( Note: Lcd / Led Screen To Be Provided By Client ) , Sitc Of Hospital Nurse Call System ;- External Led Monitor For Displaying Nurse Call Status Minimum 20 Led Wall / Ceiling Mounted Screen Having Dvi Input Port , Sitc Of Hospital Nurse Call System :- Supply Of Vde 0834 Certified / Approved Lamp Module For Optical Indication Of Calls, Presences And Reminders In The Relevant Colours Conforming To Vde0834 Consisting Of: - 4 Light Chambers With Light Reflectors For Homogeneous Illumination, - 1 Light Chamber Fitted With 3 Ultra Bright Red Leds, - 1 Light Chamber Fitted With 3 Ultra Bright White Leds, - 1 Light Chamber Fitted With 3 Ultra Bright Green Leds, - 1 Light Chamber Fitted With 3 Ultra Bright Blue Leds, - The Led Life Expectancy Is Approximately 100, 000 Operating Hours, , Sitc Of Hospital Nurse Call System :- Networking & Integration Supply Of Management Center- Nurse Call Server Management Centre Server For Nurse Call System For Uploading The Firmware And The System Configuration, For Operating Interfaces To Foreign Systems, For Logging Of All System Events And As A Central Location For System Configuration And Remote Maintenance As Per Vde 0834 - Intel Xeon 3220 2, 4Ghz Or Similar - 2 Gb Ram, 1 X 160Gb Hdd - 1 X Dvd Harddrive, 2 X Gbit Lan Ethernet Rj45 - 1 X Serial Connection Rs232 And 2 X Usbv2.0 - 1 X Pci Or 1 X Pice Socket, Support For Suse Linux Enterprise Server From V10.1 - The System Working On Any Virtual Plateform ( Vm Ware / Virtual Box / Hyper V Etc ) Is Striclty Not Allowed Software- Event Database Software Software Pack Installed On The System Server For Automatically Logging All Events In The Entire Communications System, Such As, E.G., Calls, Presence Markings, Call Acknowledgements, Reminders. All The Report Should Be Able To Generate On Real Time Basis Without Any Delay. The Licesce Should Be For Life Time Without Any Additional Cost In Future. , Sitc Of Hospital Nurse Call System :- 8 Core Cat6 Utp Cable With Necessary Connectors , Sitc Of Hospital Nurse Call System :- 25 Mm Pvc Medium Grade Isi Marked Conduit , Sitc Of Hospital Nurse Call System :- Power Supply Smps 24 V / 7 Amps , Sitc Of Intelligent Addressable Fully Redundant Fire Alarm Detection System :- Sitc Of32 Bit Microprocessor Based Intelligent Addressable Fire Alarm Control Panelwith 1 Loopwith Battery Back Up To 24 Hours, The Control Panel, Batteries, Battery Charger Etc, Shall Be Vds Approved And As Per En-54 Standard. The Panel Shall Consisting With Minimum 240 Character Lcd Display.Panel Should Be Able To Record At Least 10000 Events History. Each Loop Should Be Capable To Have At Least 250 Elements / Devices Out Of Which Min. 200 Nos. Shall Be Detectors. The Panel Shall Have On Board Tcp / Ip Lan Port To Facilate Remote Operation Of The Panel. The System Should Be Vds Approved It Is Possible To Commissioning The System Through Lan Network. , Sitc Of Intelligent Addressable Fully Redundant Fire Alarm Detection System :- Supply, Installation, Testing & Commissioning Of Intelligent Addressable Type Multisensor Detector With Base, With 8 Bit Microprocessor Inbuilt, For Use As Heat ( Fixed + Rate Of Rise Or Individual ) Or Smoke Or Combined Both With Automatic Electronic Addressing, Microprocessor Type And Must Have Integrated Short Circuit Isolator ( In Case Short Circuit Isolator Is Not Inbuilt, The Price Of This Item Shall Be Inclusive Of An Independent Short-Circuit Isolator Along With Each Detector ) . The Detector Shall Have Ip 44 Protection Category & Ambient Temperature -20°C To + 60°C, The Base Shall Have No Electronics Only Dry Contact Terminals.The Quoted Item Shall Completely Comply To The Technical Specification. Shall Be Vds Approvedaccording Toen 54-5, 54-7, 54-17, 54-29 , Sitc Of Intelligent Addressable Fully Redundant Fire Alarm Detection System :- Sitc Addressable Manual Call Point Which Is Used For Manually Trigger A Fire Alarm Suitable For Interconnecting To The Loop Technology Directly. This Must Have Inbuilt Short Circuit Isolator, . The Ambient Temperature Range Shall Be -20°C To +50°C.The Quoted Item Shall Completely Comply To The Technical Specification. Shallbe Vds Approved , Sitc Of Intelligent Addressable Fully Redundant Fire Alarm Detection System :- Sitc Addressable Loop Powered Multi Tone Sounder With Integrated Short Circuit Isolator ( In Case Short Circuit Isolator Is Not Inbuilt, The Price Of This Item Shall Be Inclusive Of An Independent Short-Circuit Isolator Along With Each Loop Powered Sounder ) & Having Operating Temperature -10°C To + 55°C Shallbe Vds Approved , Sitc Of Intelligent Addressable Fully Redundant Fire Alarm Detection System :- Supply, Installation, Testing & Commissioning Of Vds Approved Analogue Addressable Input / Output Module With Ip66 Casingcontaining 2 Inputs For Monitored Quering Of Potential Free Contacts Amd One Relay Output With In-Built Short Citcuit Isolator ( In Case Short Circuit Isolator Is Not Inbuilt, The Price Of This Item Shall Be Inclusive Of An Independent Short-Circuit Isolator Along With Each Monitor Module ) , It Must Be Vds Approved And As Per En-54 Standard. The Ambient Temperature Range Shall Be -20°C To +60°C.The Quoted Item Shall Completely Comply To The Technical Specification , Sitc Of Intelligent Addressable Fully Redundant Fire Alarm Detection System:-Response Indicator , Sitc Of Intelligent Addressable Fully Redundant Fire Alarm Detection System :- Supply And Laying Of 2C X 1 Sq.Mm Twised Multistranded Frls Shielded Armoured Cable For Fas System , Sitc Of Intelligent Addressable Fully Redundant Fire Alarm Detection System :- Junction Boxes, Clamps, Conduits And All Necessary Accessories To Complete The Installation , Supply, Installation, Testing & Commissioning Of Medical Gas Piping Inside Sicu, Post Op & Recovery Unit As Per Tender Technical Specification & This Boq , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : High Side :Air Handling Unit:- Supplying, Installation, Testing And Commissioning Of Double Skin Construction Floor Mounted Draw Thru Type Air Handling Units Each Complete With Filter Suction , Refrigerat Coil Of Copper Tube & Aluminium Fins Construction Each For, Squirrel Cage Induction Motor, Centrifugal Fan With Backward Curved Fan Blades, Belt Drive, Filters, Coil Size Shall Be Selected For A Maximum Face Velocity Of 500 Feet / Minute And External Static Pressure Shall Be 35Mm Wg Or As Required To Overcome Pressure Drop In The Systems. Motor Shall Be Suitable For 415+ / -10% Volts, 50 Cycles, 3 Phase / Ac Supply. The Ahu Shall Be Supplied With Pre Filter 90% Down To 10 Microns , Puf Insulation 43 Mm And Density 38 Kg / M3. Air Moving And Tonnage Capacities Shall Be As Detailed Below, Complete In All Respect.Maxmum Noise Limit 65 Dba At 1 M Distance. 17 Tr 6800 Cfm , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit: High Side :- Air Cooled Direct Expansion Type Condensing Unit :- The Unit Shall Be Complete With Hermetically Sealed Scroll Type Compressors With Constant Speed Designed For Operation At Ambient Temperature Of 53 Deg C. Condenser Shall Be Air Cooled Type With Copper Tubes And Extended Aluminum Fins With Anticorrosive Coating. Condenser Fan Shall Be Of Bldc Motors Are More Efficient Than Conventional Ac Motors Used By Others Bldc Motors 40% Motor Efficient At Lower Speeds About 20 More Efficient At Higher Speed. Unit Shall Be Design To Deliver Rated Cooling Capacity At 53 Deg C Ambient Temperature. Refrigerant Shall Be Cfc Free, Either R-410A . Outdoor Unit Shall Not Be More Than 50Meter Away From The Indoor Unit.& Vertical Height 30 Meter 8.5 Tr Dx Condensing Unit For Dx Ahu. , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit: High Side :- Ahu Kit & Communication Kit , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : High Side :- Remote Controller With Each Ahu , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Low Side :- Supply, Installation, Testing And Commissioning Of Refrigerant Piping , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Low Side :- Drain Piping - 50 Nb Upvc, Insulated With 9 Mm Thick Elastomeric Closed Cell Nitrile Rubber Insulation Material, Joints To Be Sealed With Adhesive Tape. , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Low Side :- Metal Ducting & Accessories-For Hvac System :- Supply, Installation Testing & Commissioning Of Factory Fabricated Gi Sheet Metal Duct As Per Smacna Standard Along With All Accessories And Feetings.All Ductwork Shall Be With Site Fabricated. ( Tantative Considered Qty ) ;- 24 G , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Low Side :- Metal Ducting & Accessories-For Hvac System :- Supply, Installation Testing & Commissioning Of Factory Fabricated Gi Sheet Metal Duct As Per Smacna Standard Along With All Accessories And Feetings.All Ductwork Shall Be With Site Fabricated. ( Tantative Considered Qty ) :- 22 G , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Low Side :- Metal Ducting & Accessories-For Hvac System :- Supply, Installation Testing & Commissioning Of Factory Fabricated Gi Sheet Metal Duct As Per Smacna Standard Along With All Accessories And Feetings.All Ductwork Shall Be With Site Fabricated. ( Tantative Considered Qty ) :- 20 G , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Supply & Installation Of Thermal Insulation & Acoustic Insulation Of Duct With Mechanical Protection As Per Technical Specification :- Thermal Insulation : Supply, Installation, Testing & Commissioning Of 19 Mm Thick Nitrile Rubber ( Class“O” Plain Sheet ) Closed Cell Insulation With Alluminum Foil For Supply & Return Air Duct After Applying Suitable Adhesive For Nitrile Rubber. The Joints Shall Sealed With 50 Mm Wide And 3 Mm Thick Self Adhesive Nitrile Rubber Tape Insulation Complete As Per Specifications And As Required.Density With 40 Kg / M3. , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Supply & Installation Of Thermal Insulation & Acoustic Insulation Of Duct With Mechanical Protection As Per Technical Specification :- Acoustic Insulation : Supply, Installation, Testing & Commissioning Of 10 Mm Thick Accoustic Insulation Open Cell Class 1 Insulation For Supply Air Duct After Applying Suitable Adhesive For Nitrile Rubber. The Joints Shall Sealed With 50 Mm Wide And 3 Mm Thick Self Adhesive Nitrile Rubber Tape Insulation Complete As Per Specifications And As Required. Density With 180 Kg / M3. , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Supplying Installation , Testing & Commissioning Of Powder Coated Extruded Aluminium Supply Air Square Diffuser With Aluminium Volume Control Dampers As Per Specifications. 600X600 Square Diffuser , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Supplying Installation, Testing & Commissioning Of Powder Coated Extruded Aluminium Return Air Square Diffuser Without Aluminium Volume Control Dampers As Per Specifications. , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Supply, Installation, Testing And Commissioning Of 18G Gi Volume Control Duct Damper Complete With Neoprene Rubber Gaskets, Nuts, Bolts, Screws Linkages, Flanges Etc, As Per Specifications. , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Motorized Fire Damper :- Fire Dampers , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Motorized Fire Damper :- Actuators , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Steel Structure Fabrication, Erection, Painting For Support ( Inclusive Supply Of Primer And Paint ) For 11 Tr Dx Condensing Outdoor Unit , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Canvas Connection Between Duct & + Ahu Unit & Duct , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Isolation Rooms :- Supply Installation Testing & Commissioning Of 5.5 Tr Dx-Type Outdoor Units For Ahu , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Isolation Rooms :- Supply Installation Testing & Commissioning Of 1375 Cfm Ahu With Dx Coil Unit & Hepa Filter. , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Isolation Rooms :- Supply Installation Testing & Commissioning Of Cabinet Type Inline Fans Of 1850 Cfm For Isolation Room , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Isolation Rooms :- Supply Installation Testing & Commissioning Of Aluminium Ducting Of Following Gauges 24 Gauge Ducting , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Isolation Rooms :- Supply Installation Testing & Commissioning Of Aluminium Ducting Of Following Gauges 22 Gauge Ducting , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Supply Installation Testing & Commissioning Of Gi Ducting Of Following Gauges :- 24 Gauge Ducting , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Supply Installation Testing & Commissioning Of Gi Ducting Of Following Gauges :- 22 Gauge Ducting , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Supply Installation Testing & Commissioning Of Thermal Insulation Of 13Mm Thick Nitrile Rubber , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Supply Installation Testing & Commissioning Of Acoustic Insulation Of 15Mm Thick Nitrile Rubber , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Grills & Dampers :- Supply Installation Testing & Commissioning Of Automatic Fire Dampers , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Grills & Dampers :- Supply Installation Testing & Commissioning Of Duct Dampers , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Grills & Dampers :- Supply Installation Testing & Commissioning Of Actuator , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Grills & Dampers :- Supply Installation Testing & Commissioning Of Supply Diffuser With Dampers , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Grills & Dampers :- Supply Installation Testing & Commissioning Of Aluminium Powder Coated Return Air Grill With Dampers , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit :Copper Piping Between Ahu & Dx Units , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Communication Cable Between Indoor & Outdoor Units. , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : 32Mm Dia. Pvc Pipe For Drain , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Table Top Ms Stand For Outdoor Units & Exhaust Units. , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Meghnalic Gauges For Isolation Rooms , Supply, Installation, Testing & Commissioning Of Hvac For Inside Sicu, Post Op & Recovery Unit : Supply Installation Testing & Commissioning Of 1Kw Heaters For Isolation Rooms Ahu , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of 12 Channel Ecg Machine As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Defibrillator As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of 7 Para Patient Monitor As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of 16 Bed Central Nursing Monitoring Station As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Syringe Pump As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Convective Patient Warming System As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Icu Ventilator As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Transport Ventilator As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Hyper Hypothermia Unit As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Hemodynamic ( Cardiac Output ) Monitor As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Motorised Hospital Bed As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Bed Cubicle With Curtains Netted As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Ceiling Mounted Iv Hanger System As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Quadra Color Dustbin Set Of 4 As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Crash Cart Trolley Stainless Steel As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Medicine Trolley With Six Drawer As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Wheelchair With Handbrake As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Food Table Over Bed Table Abs As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Bed Side Cabinet Abs As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Supply & Installation Of Foot Step Abs Top Table As Per Tender Technical Specification & This Boq , Medical Equipment’S And Furniture For Modular Sicu, Post Op & Recovery Unit :- Site Modification - Any Minor Demolition, Reconstruction, Water Proofing, Necessary Plumbing, Anti-Microbial Painting, Replacement Of Any Door Or Windows To Provide Structured Design Within The Modular Sicu, Post Op & Recovery Unit

BRR : 7203299 Tender For Construction Of One Multistoried Tower Block (Stilt +10 Storied) Comprising Of 60 Nos Of Type ‘C’ Residential Quarters Phase-3 At Kaiga Township).; 1 Part:A Civil WorksFoundation Works:Clearing jungle including uprooting of rank vegetation, grass, brush etc., and removal of rubbish and disposing outside the periphery of the work area. 2 Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting & stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools & other appurtenaces required to complete the work. 3 All kinds of soil - Upto 1.5mtr depth 4 All kinds of soil- Depth exceeding 1.5m, but not exceeding 3 m 5 Bored cast-in-situ M35 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. 6 500 mm dia piles 7 600 mm dia piles 8 750 mm dia piles 9 Carrying out Vertical loading test on following pilesas per IS: 2911 – (part-IV) including all required material, labour etc., including submission of test report as per the direction of EICIntial Load Test 10 500 mm dia piles 11 600 mm dia piles 12 750 mm dia piles 13 Carrying out Vertical loading test on following pilesas per IS: 2911 – (part-IV) including all required material, labour etc., including submission of test report as per the direction of EICRoutine Load Test 14 500 mm dia piles 15 600 mm dia piles 16 750 mm dia piles 17 Providing Pre-Construction Anti TeRMite Treatment by treating contact surface of soil with the plinth beams, top surface of plinth filling & plinth protection area etc. as per IS:6313 with a perfoRMance guarantee of five years etc. complete all as per specifications and as directed Engineer-in-charge.Note: measurement shall be for plinth area of the building. 18 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m 19 Using selected excavated earth 20 Using soil obtained from burrow pits 21 Providing and laying Rubble Stone Soling using hard granite stones below floor, for consolidated thickness of 150mm with stones vertically hand set, interstices packed with smaller stone chips, binding with murrum, watering, consolidating and finish to level etc. complete as per specifications and as directed by Engineer-in-Charge. 22 Providing and laying in proportion P.C.C1:3:6Plain cement concrete using 20mm down crushed aggregate of approved quality for mudmatleveling course for foundation, plinth and below flooring including foRM work wherever necessary, consolidation, leveling, finishing and curing etc complete as per specification and as directed by Engineer-in-Charge. 23 Providing and laying PCC 1:2:4 using 20 mm & downsize, clean, crushed, well graded, cubical shape, sharp edged aggregates of hard, durable & approved quality stones / rubbles for plinth, floor & drain bedding & all other various miscellaneous PCC works including machine mixing, transporting, laying, spreading, consolidating, levelling, finishing as directed, providing; fixing & removing necessary foRM work; as & when required / directed, preparation of base properly by dressing; levelling & hand ramming using wooden hand rammer by proper watering, racking out all the masonry joints & close hacking the old / new concrete / plastered surfaces for proper / good bonding, base shall be fully neat, clean & slightly wet before laying Concrete, Curing for a minimum period of 7 days, cleaning the work area & disposing the debris / waste materials / unwanted materials / things etc., upto a lead of 2000 meters outside the pheriphery of work premises etc. complete all as per specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights. 24 Providing and laying Cast Insitu RCC of M30 grade using graded stone aggregate 20mm max size including weigh batching, mechanical mixing, transporting and placing, vibrating, consolidation, finishing, curing,etc complete atfor Pile Cap, plinth beam, lift pits, cloumn, beams slab, stair case up to stilt floor levels for all RCC worksall heights/ levels as per drawing, specifications and as directed, but excluding foRMwork and steel reinforcement. 25 Providing centering and shuttering for Pile Cap, plinth beam, lift pits, cloumn, beams slab, stair case up to stilt floor levels etc. for all RCC works including removal of the same for in-situ reinforced concrete using approved foRMwork including sturting propping etc at all levels, heights & floors and removal of the same for in-situ reinforced concrete. Complete as per specifications, relevant IS and as directed by Engineer-in-Charge. 26 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification 27 Providing and Constructing R.R. masonry, using hard; durable & approved quality stones / rubbles, in CM 1:6 for foundation works & all other miscellaneous RR masonry works etc., including racking out all the masonry joints or simultaneous flush pointing, providing; fixing& removing necessary staging / platfoRM wherever; as & when required / directed, close hacking the old / new concrete / plastered surfaces for proper / good bonding, base shall be fully neat, clean & slightly wet before laying masonry, Curing for a minimum period of 7 days, cleaning the work area & disposing the debris / waste materials / unwanted materials / things etc., upto a lead of 2000 meters outside the pheriphery of work premises etc. complete all as per specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights. 28 Superstructue Works including finishing items:Providing and laying Cast Insitu RCC of M 30 grade using graded stone aggregate 20mm max size including weigh batching, mechanical mixing, transporting and placing, vibrating, consolidation, finishing, curing,etc complete atforcloumn, beams slab, stair case for all RCC worksall heights/ levels as per drawing, specifications and as directed, but excluding foRMwork and steel reinforcement. 29 Providing centering and shuttering for all RCC works including removal of the same for in-situ reinforced concrete using approved foRMwork including sturting propping etc at all levels, heights & floors and removal of the same for in-situ reinforced concrete. Complete as per specifications, relevant IS and as directed by Engineer-in-Charge. 30 Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete for all Heights/levelsincluding cost of transportation, cost of cover block in cement concrete M-25 / M-30 grade as per specification etc. complete. 31 Providing and constructing load bearing wall with Solid Concrete blocksof size 400x200x200mm having block density more than 1800kg/m3and minimum compressive strength of 4.00 N/mm2 confoRMing to IS2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. 32 Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 confoRMing to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications 33 Providing cement plaster 12mm thick to underside of all concrete surfaces such as ceiling, chejjas, stair case etc., at all floor and heights in CM 1:4 rubbed perfectly so as to obtain smooth and even finish including close hacking of concrete surface, scaffolding, curing etc., complete all as per specifications and as directedby the Engineer in-charge. 34 Providing and laying cement plaster 15mm thick for internal surfaces of walls and columns at all Floor and heights in CM 1:6, rubbed perfectly so as to obtain smooth and even finish including close hacking of concrete surface wherever required, scaffolding, curing etc. complete as per specification and as directed by the Engineer in-charge. 35 Rendering smooth finish; using Brila White Putty in One /Two Coats over internal plastered surfaces of wall; concrete & ceiling including rubbed perfectly so as to obtain smooth & even finish, providing; fixing & removing necessary staging / platfoRM, preparation of base properly by cleaning & washing, Base shall be fully neat, clean & drybefore application of putty, cleaning the work area & disposing the debris / waste materials / unwanted materials / things etc., upto a lead of 2000 meters outside the pheriphery of work premises etc. complete all as per specification and as directed by the Engineer-in-charge at all locations and at all lifts / heights. 36 Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge 37 Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 L per 50 kg of cement or as per direction of Engineer incharge. 38 Providing and laying vitrified floor tiles with thickness 9-10 mm s ize of Tile 600x600 mm s with water absorption less than 0.08% and confoRMing to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete. 39 Flooring 40 Skirting 41 Providing and laying Antiskid Cramic Tiles of605 mm X 605 mm or of any other approved size and make of approved shade / colourthickness of tile shall be 8 mm to 8.9 mm for Flooring with 20 mm thick CM of 1:4 [bedding] and for Skirting with 12 mm thick CM of 1:3 [backing] or using approved Adhesive [for Flooring & Skilting] pasting the Vitrified tiles on concrete or on masonry or on plastered surfaces, close jointed [with or without spacers] as directed, grout filling in the joints with matching pigmented cement slurry, finished to true line & levels / slope / plumb etc., including cutting of tiles, recommended washing, preparation of base by close hacking / roughening of existingbase, racking out all the adjoining masonry joints, cleaning & washing the base with clean water, base should be fully neat; clean & slightly wet / moist before laying mortar & tiles and base shall be fully neat; clean & dry before laying adhesive & tiles, cleaning & washing / mopping the work area and disposing the debris / unwanted materials up to a lead of 2000 meters outside the periphery of work premises etc., complete all as per specifications, as per manufacturers specification and as directed by the Engineer-in-charge at all locations & at all lifts / heights. ( Basic rate of material shall be minimum Rs. 45/- per Sq.ft) 42 Flooring 43 Skirting 44 Providing and laying Antiskid Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality confoRMing to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete 45 Providing and laying ceramic tiles for dado/ skirting using tiles of approved make, shade/ colour and of 300 x 450 mm size having minimum thickness of 5.5mm in approved pattern over a bed of 12mm thick in cement mortar 1:3, close jointed and pointed with matching pigmented cement slurry and finished to line/ levels as required including cutting of tiles, curing, acid washing etc. complete all as per specification, as per drawing and as directed by engineer-in-charge at all floors and heights. 46 Providing and laying 20mm thick Kota stonefor Staircasetreads and landing at all heights using machine cut slabs in single piece or as directed over a bed of 12mm thick in cement mortar 1:3, close jointed and pointed with matching pigmented cement slurry including rounding off the nosing, curing , polishing etc. complete all as per specification, as per drawing and as directed by engineer-in-charge at all floors and heights. 47 Providing and laying 18 to 20 mm thick Black Granitestone of approved colour & shade for Kitchen PlatfoRM & Facia using machine cut pre-polished on one face, slabs in single piece or as directed laid over 20mm thick cement morter 1:3, close jointed and pointed with matching pigmented cement slurry finished to levels, slope as required & curing, rubbing, nosing rounded off etc. complete as per specifications and as directed by the Engineer in-charge. 48 Providing and laying 20 to 25 mm thick Cuddappa Slabs of approved colour & shade for Kitchen Store & Below PlatfoRMusing machine cut pre-polished on one face, slabs in single piece or as directed laid over 20mm thick cement morter 1:3, close jointed and pointed with matching pigmented cement slurry finished to levels, slope as required & curing, rubbing, nosing rounded off etc. complete as per specifications and as directed by the Engineer in-charge. 49 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : ** Flamed finish granite stone slab Black, Cat Eye, River Pink or equivalent. 50 Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete 51 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge 52 Providing and fixing pressed steel door frames confoRMing to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile D Fixing with adjustable lugs with split end tail to each jamb including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 53 Providing and fixing pressed steel door frames confoRMing to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile C Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 54 Providing and fixing pressed steel door frames confoRMing to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer- in-charge: Profile B Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. 55 Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol foRMaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer, including cost of all SS fixtures and fittings complete as per spcification35 mm thick both side Teak 56 Providing and fixing factory made Green certified, Anti TeRMite, UV resistant, high water absorbant single extruded WPC (Wood olymerComposite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) having minimum density of 650 kg/m3 and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength of 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being teRMite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, SS fixtures and fittings The cost includes cost of materials, transportation, labour and fixing charges 30 mm thickness 57 Poviding and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for foRMing hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels confoRMing to IS: 14856, including fixing to frames. including cost of all SS fixtures and fittings 30 mm thickness 58 Providing and fixingposition Teak wood panel mesh shutter for doors with styles and railsbottom and lock rail 180mm wide top rail, styles 100mm wide , panels shall be fixed with SS weldmesh 12 gauge and mosquoto mesh ,including cost of all SS fixtures and fittings etc., complete. 30 mm thickness 59 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make confoRMing to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For Fixed Portion : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) including cost of materials, labour, usage charges of machinery complete as per specifications 60 Poviding & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(TheRMo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 81mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm x 57mm and mesh sash of size with GI reinforcement of 1.5mm thickness. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8-2.0mm. Maximum possible size – 1519mm x 1519mm (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) 61 Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(TheRMo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) 62 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 g) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/m3, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being teRMite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-InCharge. (Fixtures shall be paid for separately) Size 62 x 100mm 63 Providing and supplying cupboard shutter with 19mm thick one side Architect recommended decorative laminate (1mm thick) and other side balancing lamination(preferably white) on factory pressed BWP grade marine ply as per IS 710 of approved brand complete as per direction of engineer in-charge.(Payment for providing and fixing auto closing hinges shall be paid separately 64 Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam sheets (Single extruded) having density 600 kg/m3 and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastner with necesary stainless steel screws, all complete as per direction of Engineer-incharge 65 roviding and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 kg/m3 and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity. Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge 66 Providing and fixing Window pelmets 125mm wide, using 19mm thick water proof plywoodand providing 0.8mm thick laminate on external surfaces and one coat of primer and two coats of enamel paint on internal surfaces. The pelmets shall be provided with SS pelmet rod and fixing bracket etc., complete. 67 Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break >120% as per ASTM D 412, Tensile strength >1N/s. mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification Note:Measurement for payment shall be actual area covered by the treatment. 68 Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Pack 69 Providing and laying Cinder Concrete in 1:15 ( 1 cement : 15 cinder of 12.5mm size) for sunken floor of toilets, washing areas, water closets, etc., complete all as per specifications, as per masnufacturers specification and as directed by the Engineer-in-charge at all locations & at all lifts / heights. 70 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 g/l, of approved manufacturer, of required shade and colour complete, as per manufacturers specification. Two coats on new work to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 71 Applying priming coats with primer of approved brand and nufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. 72 Providing Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labs, roviding and removing necessary scaffolding etc. complete as per the specification and as directed by the Engineer In-charge at all heights. 73 Providing and painting of texuredd exterior paint of required shade :(Two coats on existing cement paint surface applied @ 3.28 l/10 m² including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. 74 Providing and applying one coat of approved primer and two or more coats of Premium Acrylic Smooth exterior paint of required shade : (Two coats applied @ 1.43 l/ 10 m²) over existing cement paint surface including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge 75 Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M-30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. 76 Supply and fixing metal fan box with round hook 77 Preparation of Architectural drawings, Structural design & drawings, PH, Electrical, Firefighting, communication system design & drawings and preparation of bill of quantities & rates for Electrical, Firefighting, communication system. The rates are inclusive of proof checking by serving IIT/IISc/NIT faulty 78 Part:B Water supply & Sanitory WorksProviding and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), confoRMing to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid 79 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) confoRMing to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 80 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap 81 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 225 mm 82 Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Economy Class 83 Providing and fixing Wall spout with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Economy Class 84 Providing and fixing Wall Mixer Telephonic with crutch only made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class 85 Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Economy Class 86 Providing and fixing Exposed set for concealed stop cock made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete -EconomyClass 87 Providing and fixing 15 NB PVCInlet connectionswith brass check nuts at both ends & with X Nipple of length 450 mm ofApproved brand / Makewith all its required accessories including labour charges & all required consumables and ensuring smooth functioning etc., complete all as per specification and as directed by the Engineer-in-charge at all locations & at all lifts. 88 Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete 89 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 90 Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class 91 Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class 92 Providing and fixing Single flow hand showers with Anti lime jets with 1.5m Extendable flexible tube, holder & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class 93 Providing and fixing CP grating of 6mm thick with rim including setting in floor with white cement mortar and making good the floor. 94 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having theRMal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 95 15mm dia 96 20mm dia 97 25mm dia 98 32mm dia 99 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having theRMal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 100 25mm dia 101 32mm dia 102 40mm dia 103 50mm dia 104 65mm dia 105 80mm dia 106 100mm dia 107 Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 108 80mm dia 109 100mm dia 110 150mm dia 111 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of 150mm dia confoRMing to IS : 13592 Type A, including jointing with seal ring confoRMing to IS : 5382, leaving 10 mm gap for theRMal expansion, (i) Single socketed pipes. 112 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 113 25 mm dia 114 32 mm dia 115 40 mm dia 116 50 mm dia 117 65 mm dia 118 80mm dia 119 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25mm nominal bore 120 Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover 180 x 150 mm size P type & With Non Modular common burnt clay bricks of designation 3.5 & frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 121 Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600X850 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : With common burnt clay (non modular) bricks of class designation 3.5 122 Extra for depth beyond 45 cm of brick masonry chamber : For 600x850 mm size With common burnt clay (non modular) bricks of class designation 3.5 123 Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 124 75mm nominal dia pipes 125 110mm nominal dia pipes 126 150mm nominal dia pipes 127 PART:CElectrical WorksFabrication, Supply, Installation, testing & commissioning of Following rating 3 phase with neutral medium voltage floor standing cubicle type indoor panel with the followings. The panel shall have degree of protection not less than IP 54. The panel shall be complete with internal wiring, measuring digital type meters, selector switches, CTs,LED type indicating lamps etc. shall be provided for incomer. The Panel shall be fabricated using ISA, 14SWG CRCA sheet & Painted with one coat of epoxy primer, 2 coats of epoxy grey paint. The fabrication/general arrangement/ wiring diagram and make of the materials shall be got approved by the Engineer -in- charge before fabrication.All as per technical specification and as directed by the Engineer -in- charge. 128 Supply of 800 Amps PDB panel indoor type consisting followinga) 800 Amps 4 Pole 50 kA ACB with Microprocessor Based - 01 no. as incomerb)125 Amps 4 Pole TM release 25 kA MCCB - 02 nos. as outgoingc)100 Amps 4 Pole TM release 25 kA MCCB - 10 nos. as outgoing. 129 Installation of above panel mentioned initem no. 1.1 130 Fabrication, Supply, Installation, testing & commissioningof Following rating 3 phase with neutral medium voltage wall mounting indoor panel with the followings. The panel shall have degree of protection not less than IP 54. The panel shall be complete with internal wiring, busbars,LED type indicating lamps etc. shall be provided for incomer. The Panel shall be fabricated using ISA, 14SWG CRCA sheet & Painted with one coat of epoxy primer, 2 coats of epoxy grey paint. The fabrication/general arrangement/ wiring diagram and make of the materials shall be got approved by the Engineer -in- charge before fabrication.All as per technical specification and as directed by the Engineer -in- charge. 131 Supply of 63 Amps PDB panel indoor type consisting followinga)63 Amps 4 Pole TM release 25 kA MCCB- 01 no. as incomer.b)32 Amps 2 Pole MCB (C Curve) with single phase digital energy meter - 8 nos. as outgoing.c)20 Amps 2 Pole MCB (C Curve) - 2 nos. as outgoing. 132 Installation of above panel mentioned initem no. 2.1 133 Supply, Installation, testing & commissioning of230 Volts 12 way SPN, double door, tinned copperbus bar type MCB Distribution boards with specified MCB units. Installation includes Supply of required fixing screws, nuts & washers etc. Installation covers, supply of all consumables, rawal plug/wooden screws etc to complete the installation in all respect. The DB shall suitable for surface mounting, consisting of following MCBs andneutral link & other details as per technical specifications.a) 32A SPN RCCB (30 mA) as incomer- 1 No. b) 10A SP MCB (C Curve) as outgoing -6 Nos. c) 20A SP MCB (C Curve) as outgoing -6 Nos 134 Supply and Laying of 1.1 kV grade 3.5 Core 50 SqMm, stranded aluminium conductor, XLPE insulated, PVC outer sheathed, Galvanized steel FoRMed wire aRMoured cable to IS:7098 135 Supply 136 Laying 137 Supply, Glanding, teRMination, connections & testing of3.5 Core 50 SqMm aRMouredcables. The glanding shall be done as per requirement. All materials including suitable size of gland, lugs, insulation tape, crimping paste etc., is in the scope of contract.All other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 138 Supply of maintenance free earthing stations as per technical specifications. The Maintenance free earth pit station made out of 3 Mtrs. length, 80mm dia Copper 250 micron coated/ GI Pipe and back filling compound & masonry chamber or readymade FRP pit cover as per IS - 3043 at location shown by the Engineer. All as per technical specifications. 139 Installation, testing & commissioning above earth pit supplied against item no. 6 at location shown by the Engineer in charge. The scope of work includes excavation of earth to the required depth and back filling with back filling compound after installation of earth electrode etc., as per technical specifications and as directed by the Engineer in charge. 140 Supply & installation of 25 X 3 mm sizes ofGI flat for structure/ DB/equipment earthing purpose. Flat shall be laid on floor surface /along the panel/ below finished ground level (if required) and through routes as directed by Engineer -in -Charge. The scope of work includes clamping of flat at an interval of 500 mm on wall /structure/equipment surface, laying in ground by excavating to a depth of about 300mm & in trench/floor & bending, drilling, welding & connection with required G.I hardwares etc& all other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 141 Supply 142 Installation 143 Supply and pulling of following size 1100 Volts grade PVC insulated FRLS copper conductor (multi-stranded) wire in already installed conduit/casing & capping for lighting/powercircuits. The contractor has to supply the wire of required colour code for each phase, neutral & earth. The wire shall be teRMinated at both ends with using lugs & proper identification ferrules. All other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 144 Supply of 1.5 SqMm Copper wire 145 Supply of 2.5 SqMm Copper wire 146 Supply of 4 SqMmCopper wire 147 Supply of 6 SqMm Copper wire 148 Pullingof1.5 SqMm / 2.5 SqMmcopper wire 149 Pullingof4 SqMm / 6 SqMmcopper wire 150 Supply and Installation ofConcealed type, 16 SWG GI Sheet metal boxes offollowing sizes. GI Sheet metal boxes shall be embedded in the brick/concrete wall/roof by chipping at location shown in the drg.All as per technical specifications & as directed by EIC. 151 Supply of 2 module GI sheet metal box ofsize 7.6 X 7.6 cm (similar to havells model no. ACTXMITX01) 152 Supply of 4 module GI sheet metal box ofsize 13.56 X 7.6 cm (similar to havells model no. ACTXMITX04) 153 Supply of 6 module GI sheet metal box ofsize 20.98 X 7.6 cm (similar to havells model no. ACTXMITX06) 154 Supply of 8 /9 module GI sheet metal box ofsize 22.7 X 7.6 cm(similar to havells model no. ACTXMITH08) 155 Supply of 12 module GI sheet metal box ofsize 20.98 X 13.6 cm (similar to havells model no. ACTXMITX12) 156 Installation of 2/4/6/8/9/12 module GI sheet metal box shall be embedded in the brick wall by chipping. 157 Supply and installation of modular slim switch, power socket, fan regulators, bulb holder, Blank switch plate,Ceiling roseas per following. All other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition 158 Supply of 6A, SP switch for light/power point/ceiling fans control. Similar to Havells make model No.AHFSXXW061. 159 Supply of 6A socket for 3 pin, shutter type. Similar to Havells make model No.AHFKPXW063. 160 Supply of 10A, Two wayswitch for light/power point/ceiling fans control. Similar to Havells make model No.AHFSXXW102. 161 Supply of Electronic step type fan regulator Similar to Havells make model No.AHFRFXW004. 162 Supply of 16A, SP switch with Neon Indicator for power point. Similar to Havells make model No.AHFSXIW161. 163 Supply of 16 A & 6A Twin Socket (Heavy duty), shutter type. Similar to Havells make model No.AHFKCXW253. 164 Supply of 10A Bell push switch with indicator. Similar to Havells make model No.AHFSBIW101. 165 Supply of TV Socket. Similar to Havells make model No.AHFKT0W001. 166 Supply of Telephone Socket. Similar to Havells make model No.AHFKNWW111. 167 Supply ofwhite color round angle bulb holder similar to Anchor by panasonic Cat No:39673 168 Supply of 3 plate ceiling rose similar to PentaAnchormake model No.39040 169 Installation of above item no.11.1 to 11.11 170 Supply and installation of Blank switch plate of 1 module for switch board to fill the extra/ balance gap of modular switch board. 171 Supply and installation of PVCElectrical Round plate/ Holder plate/ Junction plate 172 Supply and installation of following sizePVC base frame and front plate for accommodating above supplied switches/socket in already embededConcealed GI Sheet Metal box modular switch board . Installation covers, supply of all consumables, rawal plug/wooden screws etc to complete the installation in all respect. All other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 173 Supply of 2 modular switch board PC White inner plate & mounting plate similar to Havells modelNo: AHXPLIWV02 & AHXPL0WV02 174 Supply of 4 modular switch board PC White inner plate & mounting plate similar to Havells modelNo: AHXPLIWV04 & AHXPL0WV04 175 Supply of 6 modular switch boardPC White inner plate & mounting plate similar to Havells modelNo: AHXPLIWV06 & AHXPL0WV06 176 Supply of 8 modular switch boardPC White inner plate & mounting plate similar to Havells modelNo: AHXPLIWH08 & AHXPL0WH08 177 Supply of 12 modular switch boardPC White inner plate & mounting plate similar to Havells modelNo: AHXPLIWV12 & AHXPL0WV12 178 Installation of above 4/6/8/12Modular switch board with all accessories 179 Supply and Installation/ Embedment of 25 mm dia heavy duty, rigid PVC conduit. Heavy duty rigidPVC conduit in the brick wall surface/roof slab by chipping the wall / concrete surface. Wherever conduit is laid (surface conduiting) over struss/ pipe to be clamped by aluminium clamp and GInut bolt at an interval of 600mm. The conduit shall be embedded to a minimum depth of 50mm from the finished surface wall. The scope includes supply and providing PVC moulded conduit accessories like bends, couplers, elbow, Tee, junction/ pulling boxes etc.The job shall be completed in all respect, as directed byEIC. 180 Supply 181 Installation/ Embedment 182 Supply and installation of following Light fixtures surface mounting type, installation includes supply of required consumable, 3core 1.5 copperflexible cable etc to complete the job in all respect. All other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 183 Supply of 4 feet 20W LED batten light fixtures on wall surface 184 Supply of 12 watt round rimless surface panel LED Light fixture similar to Wipro garnetWP1180 185 Supply of 7 W LEDBULB suitable to connect angle holder 186 Installation of above lighting fixture Item no. 14.1 & 14.2 187 Supply and installation of 150W LED street light luminaries, with constant current driver(similar to Bajaj model-ENXT P 180L WH PO TG SD or equivalent) suitable for mounting on pole bracket with fiRM fixing arrangement, shall operate on 220-240 V AC 50 Hz power supply. LED fixture shall be of high power LED’s with Fixture efficiency > 80 Lm /W & operable life > 50,000 Hrs. generating cool white light, housed in pressure die cast aluminium with fins, heat resistant glass, synthetic gasket, weather proof surface coating, color rendering index shall be 75 to 80, suitable for outdoor application with IP 66 protection. The fixture shall be suitable to operate at height of about 3 to 10 Mtr. 188 Supply 189 Installation 190 Supply, installation, testing and commissioning of 5 star rated, 1200 mm sweep, silent BLDC motor ceiling fan complete with speed control remote , 3 nos. of wider tip blades, double ball bearing, down rod, mounting clamps etc, BEE maximum star rating is preferable for ceiling fan. Installation work includes supply of all accessories/consumable to complete the work including arrangement and fixing of suitable fan hook. All other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 191 Supply 192 Installation 193 Supply and installation of following single phase Exhaust Fans with louver heavy duty, continuously rated, capacitor start and run type, totally enclosed, pre lubricated double ball bearing, copper wounded, A & E class insulation, dynamically balanced. Installation of exhaust fan by making fixing arrangement on wall with all consumables such anchors/screws/bolts etc. Preferred make: Bajaj/Havells/crompton. All as per technical specifications. 194 Supply of 300 mm, 900 RPM Heavy duty metal body exhaust fan 195 Supply of 300 mm, 1000 RPM Heavy duty PVC body exhaust fan 196 Installation of Heavy duty metal body exhaust fan item no. 17.1 & 17.2 197 Supplying, Installation, Testing & commissioning of 10Ltr storage type Electric Geyser with flexible pipes and its all accessories suitable for operation on 230V single phase, 50 Hz, ISI marked, BEE-5Star, AC supply complete as required. Installation work includes supply of all accessories/consumable to complete the work including arrangement and fixing of Geyser. All other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition.(Make: Crompton model no.- ASWH - 3010 (ARNO NEO 5S) or Similar specifications of other approved makes) 198 Supply 199 Installation 200 Supply & installation of 2 mm thick 300 X 50 mm size Ladder type GI cable tray. Installation work includes supply of all accessories/consumable to complete the work including arrangement and fixing of Cable tray. All other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 201 Supply, installation, testing & commissioning of Early Streamer Emission (ESE) Lightining arrestor with the following.a) ESE lightening air teRMinal -1 Nob) 5 Mtr long GI Mast - 1 Noc) Down conductor of size 1C X 50 SqMm PVC insulated copper cable - Approx length of 55 mtrd) Strike counter - 1 Nos.e) Chemical earthling of 17.2 mm dia copper bonded electrode of 2 mtr length with associated accessories and backfill compound. - 2 NosThe scope includes installation of mounting structure, lightening rod, laying ofdown conductor by clamping on wall up to earth electrodes and installation of earth electrode atlocation shown by the EIC & supply of any required materials like copper lugs, anchor fasteners, nut & bolts and any associated materials to complete this work in all respect is in the scope of contract. 202 Supply and installation of color image video door phone entry system. Similar to legrand, cat no 3695 80 basic video kit 7 hands free. All other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 203 Supply and installation of single phase 230V wired Ding dong door bell. Similar to Anchor, model no 8272. All other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 204 Design, Manufacture, Supply, Installation, Testing, Commissioning, statutory requirements to install new lift and Handing over of 08 passenger MRL Lift (Gearless Machine) G+10 Landings, with speed of 1.0 mtr per second, variable voltage, variable frequency drive without machine room for the available well size, operating at 415V, 3 phase, 50Hz AC supply, stainless steel Designer finish car entrance door enclosure with flooring, car illumination, emergency light, intercom and fan as desired by the user, central opening/ side opening automatic door with attendant operation. Dot matrix/ 7 segment display, call register indicators, SS handrails inside car, full length infrared length curtain in car door, automatic rescue device, voice annunciation in languages, Braille buttons etc.& all other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 205 Design, Manufacture, Supply, Installation, Testing, Commissioning, statutory requirements to install new lift and Handing over of 15 passenger MRL Lift (Gearless Machine) G+10 Landings, with speed of 1.0 mtr per second, variable voltage, variable frequency drive without machine room for the available well size, operating at 415V, 3 phase, 50Hz AC supply, stainless steel Designer finish car entrance door enclosure with flooring, car illumination, emergency light, intercom and fan as desired by the user, central opening/ side opening automatic door with attendant operation. Dot matrix/ 7 segment display, call register indicators, SS handrails inside car, full length infrared length curtain in car door, automatic rescue device, voice annunciation in languages, Braille buttons etc.& all other details are as per Technical specifications and as directed by Engineer in charge on the basis of site condition. 206 PART:D Fire Fighting WorksSupplying, installing, testing & commissioning approved make heavy duty(Class C) GI pipes and fittings confiRMing to IS 1239 PI & II, Malleable Specials such as tees, long radius bends, check nuts, unions, nipples , etc including cutting, threading, welding/ flanged joints with necessary GI washers, nuts, bolts etc., for pipes running in pipe shafts, ceiling, over terrace etc., as per drawing and specifications. The quoted rate shall include for necessary chasing in walls, making bore in walls etc., and making good the chased surfaces and bores in cement mortar etc. complete. Price is inclusive of Fittings like couplings, reducers, bends, Tees, etc & all fittings .The scope of work included with One coat of yellow/etching primer & 2 coats of red enamel paint 207 80 mm dia 208 100mm dia 209 150 mm dia 210 Providing and fixing following Suitable Flanges for following dia f pipes. Flanges shall be of the forged steel, flat faced slip on type in accordance with IS:6392 with pressure class suitable for the system working pressure involved but in no case less than 16 Bar. Jointing face of the flanges shall be truly parallel to each other and in alignment. A suitable gasket of the approved type minimum 1.5mm thick shall be used between each jointing flange. Bolts shall be of hexagon head and shall be of adequate length such that at least three complete threads protrude through the hexagonal nut with washers when the flanged joints are fully tightened. 211 80 mm dia 212 100mm dia 213 150mm dia 214 Supplying, installing , testing and commissioning of PN16 CI butterfly valves of confiRMing to IS 13039 with necessary nuts & bolts etc., complete ---- etc., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in charge of the work 215 80mm dia 216 100mm dia 217 Supplying Installing, of M.S. Pressed reel of 600mm dia swinging type motion which allows a 180° swing and confoRMs to IS:884/85 or Aluminium fitting Single Piece Compact Type. including cost of materials, labour, usage charges of machinery complete as per specifications. 218 Providing and fixing of Non Percolating Polyster Jacketed Flexible Fire Fighting Delivery Hose of 15 mtr length as per IS 636: 1988 (ReaffiRMed 2003) - ‘Type B’. with all accessories as per the technical specification given in section -V. 219 FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm 2 of pressure with blank cap and wheel as per IS 5290 etc. complete including cost of materials, labour, usage charges of machinery complete as perspecifications. 220 Supplying Installing, testing and commissioning of 63mm mm dia double headed Gun mental Hydrant Valve with flanged inlet 2Nos, stop valve, spindle and cast iron hand wheel. It has a 2 Nos female instantaneous outlet with blank cap and is hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm2 of pressure confiRMs to IS : 2190 with blank cap and wheel as per IS 5290 etc. including cost of materials, labour, usage charges of machinery complete as per specifications. 221 Providingand fixing Stainless steel Delivery Hose Coupling confiRMing to IS 903 of approved make. 222 Supplying Installing, testing and commissioning of Gun metal Branch pipe size with nozzle of 63mm dia x19mm dia as per IS 903 complete including cost of materials, labour, usage charges of machinery complete as per specifications.

BRR : 8768098 Providing, Supplying, Commissioning Of Innovation Lab Equipments For Ghs Banapura Village In Ballari Taluk, Under 2515 Kkrdb Cmdq For The Year 2024-25. Six Axis Robotic ARM Consists of •Axis – 6 axis•64- bit ARM Cortex Processor8GB RAM64 GB Storage CapacityServo Motors with 9.6 Kg/cm Torque Payload – 200gReach – 200 mmUSB Support port Should have 8 MP Camera User can add various objects for detection Should identify pre trained Objects Should perform pick and place operation Dimension in mm(D x H): 1100 x 600 One pair of PCB and Mechanical casing should be provided 1 YES 2 Petro robot it should consists of Should have 8 MP Camera 64 bit ARM Cortex Processor 2-D Lidar Sensor Person RecognitionObject Recognition Should consists of 4 leg armShould perform forward and reverse motion Should have rechargeable battery Should have 12 V rechargeable BatteryPower Adapter for Battery Recharge •Dimension in cm (L x W x H): 62 x 20 x 45•One pair of PCB and Mechanical casing should be provided •Tasks performed: 1. Walking2. Running3. Pushups4. Dance5. Jumping6. Sit and Stand positions7. Lane following 1 NO 3 Line Following robo car it should consists of A Robotic car with 4 wheelsShould have 2 IR sensors Should have 4 DC motors Atmega 328P Microcontroller L298 Motor Driver for Direction and Speed control Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5 Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: Straight Weight: 250gm•One pair of PCB and Mechanical casing should be provided 1 YES 4 Obstacle avoidance robo car it shouldconsists of Robotic Car with 4 Wheels Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8 Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 YES 5 Voice controlled Robo Car it should consists of Robotic Car with 4 Wheels DC motors with drivesBluetooth controllerShould perform motions by voice command Ultrasonic Sensors4 DC motors with drive ESP32 controller Dimension (L x W x H): 70 x 19 x 22 mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (KgCm): 0.8Gearbox Shape: Straight Weight: 250gm •One pair of PCB and Mechanical casing should be provided 6 RC Tank Robot RC Tank Chassis Kit – 01ESP32 controllerLED Switch4 DC motors with Drive Battery 4 DC motors with drive ESP32 controllerDimension (L x W x H): 70 x 19 x 22mmShaft Length (mm): 8.5Shaft Diameter (mm): 5.4mm-(round side) and 3.5mm-(flat side)Rated Torque (Kg-Cm): 0.8Gearbox Shape: StraightWeight: 250gm•One pair of PCB and Mechanical casing should be provided 1 YES 7 AI Humanoid Robot The AI Humanoid robot can realize human body induction in different directions, can perform facial recognition, supports voice interaction, and can realize the function of guiding navigation and explaining. Should have obstacle avoidance algorithm, perceive the real-time changes in the surrounding environment, bypass the obstacles in the planned path, and choose the appropriate route Go forward and finally reach the target point. The robot should have a touchable high-definition display screen, which should display, video playback, product information query, map display and other functions. The robot should have an open SDK package and an open API, which can be used for development according to the application scenario, adding exclusive personality functions, and more in line with the actual application scenario. Technical specifications include a user-friendly interface, robust security measures, seamless integration, efficient performance, and scalability. Specification: Processor: Intel i5 8th Gen Motors: DC motors for smooth and precise movement.Microphone: High-sensitivity microphone for voice recognition and interaction.Speakers: High-quality speakers for audio output and ntertainment. Display: LCD display for user interaction, information visualization. Dimension in cm(L x W x H): 50 x 54 x 100 1 YES 8.1 IoT Pack IoT Based Smart Agriculture Smart Agriculture model should include an Raspberry Pi, a 10 inch LCD display, soil moisture sensor, water pump, and relay to automate irrigation for plants. The soil moisture sensor should continuously monitor the moisture levels in the soil. When the soil is wet, the relay should remain off, preventing the pump from operating. However, when the soil moisture level drops and becomes dry, the relay should activate, turning on the water pump to irrigate the soil. The LCD display should provide real-time feedback on soil moisture levels, ensuring efficient water management and promoting healthy plant growth. Constructed with a durable plastic body for resilience, this project demonstrates the effectiveness of smart technology in modern agriculture, optimizing water usage and enhancing crop health while ensuring reliable performance in various environmental conditions. Microcontroller: Raspberry piSoil Moisture Sensor – Measures soil humidity levels.DHT11/DHT22 Sensor – Monitors temperature and humidity.pH Sensor – Checks soil acidity or alkalinity.LDR (Light Sensor) – Detects sunlight intensity.Rain Sensor – Detects rainfall for irrigation control.Ultrasonic Sensor – Monitors water level in tanks.Water Pump – Automated irrigation control via relay.Servo Motor – Adjusts solar panel orientation.Relay Module (5V) – Controls high-power devices.IoT Connectivity – Data transmission via WiFi/Bluetooth.Cloud Storage – Stores real-time sensor data online.Web App – Displays real-time farm conditions.Power Adapter – Powers all connected components. 1 YES 8.2 IoT Based Home Automation The Home Automation System model should include a Raspberry Pi, MQ-2 gassensor, buzzer, ultrasonic sensor, servo motor, 7-inch display, DHT11 temperature sensor, and two relays to enhance home convenience and safety. The ultrasonic sensor should detect approaching objects, triggering the servo motor to automatically open the door, while the 7-inch display presents real-time temperature readings. In one room, an IR sensor should detect motion, activating the relay to turn on an LED and a fan. Additionally, when the MQ-2 sensor detects smoke in the kitchen, the buzzer should sound an alert until the smoke dissipates. The system must feature a durable plastic body for reliability and easy assembly, showcasing the seamless integration of smart technologies to create a safer and more efficient living environment, ensuring enhanced convenience and security. Microcontroller: Raspberry Pi for central control with WiFi and Bluetooth Ram: 4GB64 bit ARM Cortex ControllerGas Detection: MQ-2 sensor to detect smoke and gas leaksAlert System: Buzzer sounds when smoke is detectedObject Detection: Ultrasonic sensor detects approaching objects for automatic door controlDoor Mechanism: Servo motor opens the door upon object detectionDisplay: 7-inch screen for real-time temperature and system statusTemperature Monitoring: DHT11 sensor measures room temperature and humidityMotion Detection: IR sensor detects movement in the room Relay Module (x2): Controls LED and fan activationLighting & Ventilation: LED and fan turn on when motion is detectedBody: Durable plastic for reliability and easy assembly 8.3 Smart Watch health parameter monitoring kit Smart Watch is an innovative wearable device project, and the model should include an ESP processor, OLED display, and four push buttons to provide a range of functionalities. The watch must feature a custom-designed PCB for compactness and efficiency, along with a durable watch belt for comfortable wear. One push button should be dedicated to displaying the current time, date, and day, while another button should provide weather information, enhancing convenience for users. The remaining two buttons should be integrated for the IoT interface, allowing interaction with various smart devices and applications. This project demonstrates the potential of combining advanced technology with practical design, creating a multifunctional smartwatch that caters to modern lifestyle needs, ensuring reliability and user-friendly operation. ESP Processor – Core controller for smartwatch operations. OLED Display – Displays time, date, weather, and IoT interactions. Four Push Buttons – Dedicated for time, date, weather, and IoT control. Custom-Designed PCB – Ensures compactness and efficiency. Durable Watch Belt – Provides comfort for daily wear. Time, Date, and Day Display – Activated by a dedicated button. Weather Information Display – Accessed via a separate button. IoT Integration – Controls and interacts with smart devices. Energy-Efficient Design – Optimized for long battery life. Modern & User-Friendly – Enhances convenience and usability. 1 NO 8.4 IoT Based Smart Cam Vision Snap should consist of an advanced security system that includes facial recognition for identifying individuals, enhancing security in restricted areas. Key components include a Raspberry Pi, a camera, and a display for real-time monitoring. This system features motion detection, which triggers alerts for unauthorized movement, significantly improving surveillance capabilities. It provides real-time alerts, enabling immediate responses to potential threats, while secure connectivity ensures the protection of sensitive data. Together, these features create a robust security solution for various applications, making Vision Snap an effective tool for safeguarding premises and enhancing overall security measures. Raspberry Pi – Central processing unit for AI-based security.Camera Module – Captures real-time footage and facial recognition.Display Screen – Shows live monitoring and alerts.Facial Recognition – Identifies individuals for security access.Motion Detection – Detects unauthorized movement and triggers alerts.Real-Time Alerts – Sends notifications for immediate response.Secure Connectivity – Protects sensitive surveillance data.AI-Powered Surveillance – 1 YES 32 Enhances monitoring efficiency.Remote Access – Allows monitoring from any location.Robust Security System – Ideal for restricted areas and premises. 9.1 Immersive Technology Pack VR Headset Kit Should Consist of Following Line Item VR Head Set Storage: 512GBDisplay: Each eye experiences a resolution of 2064 x 2208 pixels, delivering sharp and immersive visuals.Processor: Powered by the Snapdragon XR2 Gen 2 chipset, providing enhanced performance for demanding VR applications.Refresh Rate: Supports a 120Hz refresh rate, ensuring smooth and responsive gameplay.Memory: Equipped with 8GB of RAM to handle multitasking and complex VR environments.Mixed Reality Capabilities: Features full-color passthrough, allowing users to blend virtual and real-world elements seamlessly.Design: Utilizes pancake optics to reduce the headsets size, offering a more comfortable fit for extended use. 1 YES 9.2 32-inch or more smart LED TV to Stream a VR applications Resolution: HD (720p)Smart Platform: Google TVFeatures: Google Play, Google Cast Built-in, HDR10, Dolby Audio, Voice Remote, Live TV Streaming 1 YES 9.3 AA Batteries – 10 Voltage: 3.7V (Lithium-Ion)Capacity: 1800–3500 mAhChemistry Types: Alkaline, NiMH (Rechargeable), Lithium, Zinc-CarbonSize: Diameter ~14.5mm, Length ~50.5mmWeight: ~23g to 30g 1 YES 9.4 6DoF AR-VR Educational Controller can be used as and augmented reality (AR) device. Hold virtual heart, lungs, dinosaurs, plants and so much more in your hand to get an engaging learning experience. AR provides students with opportunities to deepen their knowledge within several areas, including:ScienceWorking with numbersSpatial concepts Content creationReal-life environments & scenarios 1 YES 9.5 Samsung Galaxy M15 5G or ARCore supported Devices Display: 6.5-inch Super AMOLED, 1080 x 2340 pixelsProcessor: MediaTek Dimensity 6100+, Octa-coreRAM & Storage: 4GB/6GB/8GB RAM, 28GB/256GB storage (expandable up to 1TB)Rear Cameras: 50MP (wide) + 5MP (ultra-wide) + 2MP (macro)Front Camera: 13MPBattery: 6,000mAh, 25W fast charging OS: Android 14 with One UI 6Security: Side-mounted fingerprint sensor Connectivity: 5G, NFC supportDimensions: 160.1 x 76.8 x 9.3mm, Weight : 217g 1 YES 9.6 VR Application Content for experintial learning a) VR chemistry lab, b) VR human anatomy, c) VR tour guide, d) VR English Learning App, e) VR space exploration app, f) VR electrical simulator app, g) VR Based Lathe Machine app, h) VR Based SMD Soldering & De soldering app 1 YES 10 Drone Kit Should Consist of Following Line Item. Drone Kit with Wi-Fi and Camera is an ideal project for enthusiasts looking to build a custom drone from the ground up. This kit typically includes essential components such as a frame, brushless motors (BLDC), electronic speed controllers (ESCs), a flight controller board (FCB), and a Wi-Fi-enabled camera for real-time video transmission. It offers the flexibility of adding a LiPo battery for power, a remote controller, and propellers for flight stability. With built-in WiFi, users can easily control and monitor the drone using a mobile app or computer, while the camera provides aerial photography and video streaming capabilities. 1 x F450 Frame 4 x 1000kv BLDC Motor 4 x ESC Motor 1 x 2-3 Cell Battery Charger1 x 2200 mAh Lipo Battery1 x Fly Sky FS-CT6B 6ch 2.4GHz Transmitter & Receiver1 x APM 2.8 Flight Controller (Without Compass) 1 YES 11.1 Mini Makers Pack Thermo Sage Thermo Sage is a touch-free temperature monitoring system, and the model should include an ESP8266, OLED display, infrared temperature sensor, ultrasonic sensor, two LEDs, and a buzzer for efficient health monitoring. When the ultrasonic sensor detects a person within 10 cm, the infrared sensor measures their body temperature, displaying the result on the OLED screen. If the temperature I normal, the green LED lights up as an indication. However, if the temperature exceeds the normal range, the red LED activates, and the buzzer sounds an alert. The design must feature a durable plastic body for reliable performance, offering a safe, contactless solution for monitoring body temperature, ideal for public health and safety applications. Microcontroller: ESP8266 for wireless connectivityDisplay: OLED screen for temperature readingsTemperature Sensor: Infrared sensor for touch-free measurementDistance Sensor: Ultrasonic sensor to detect person within 10 cmLED Indicators: Green LED for normal temperature, red LED for high temperatureBuzzer: Alerts when temperature is above normal rangeBody: Durable plastic for reliable performanceOne pair of PCB and Mechanical Design will be provided 11.2 Sun Quest Sun Quest model should include an Arduino Nano, two LDR modules, a servomotor, a solar panel, and two LEDs to maximize energy efficiency. The LDR modules detect light intensity, enabling the system to track the sun’s position. When one LDR senses higher light intensity, the servo motor should rotate the solar panel toward that direction to optimize energy capture. The LEDs connected to the solar panel will demonstrate real-time power generation, lighting up to show how current is produced as the panel adjusts. The design must feature a durable plastic body for longevity, enhancing solar energy efficiency by dynamically following the sun’s path throughout the day. Microcontroller: Arduino Nano for system controlLight Sensors: Two LDR modules for detecting light intensityActuator: Servo motor for rotating the solar panelSolar Panel: Generates and demonstrates power outputLED Indicators: Show real-time power generationBody: Durable plastic for longevity One pair of PCB and Mechanical Design will be provided 1 NO 11.3 LightScape Lightscape model should include an Arduino Nano, LDR module, IR sensor, and 6 LEDs to optimize energy usage based on environmental conditions. When the LDR detects darkness (indicating nighttime), the system should activate, keeping 3 LEDs ON for basic lighting. When the IR sensor detects movement, all 6 LEDs should turn ON for 5 seconds to enhance visibility for pedestrians or vehicles, then return to 3 LEDs ON. During daylight, when the LDR senses light, the LEDs should remain OFF to conserve energy. The design must feature a durable plastic body for reliability, providing efficient, adaptive street lighting that responds to both time of day and movement, significantly improving energy conservation and safety on the streets. Microcontroller: Arduino Nano for system automationSensors: LDR for detecting light levels, IR sensor for motion detectionLEDs: 6 LEDs for adaptive street lightingLighting Control: 3 LEDs ON at night, all 6 ON when motion is detected for 5 secondsEnergy Conservation: LEDs OFF during daylight Body: Durable plastic for reliabilityOne pair of PCB and Mechanical Design will be provided 1 NO 11.4 Navwave NavWave is a sonar-inspired object detection sDesign will be provided 12 Electronics & Hardware Kit Universal Electrical/Electronic breadboard plug and play training kit designed to perform the experiments from the basic to advance level of electrical and electronics exercises, This kit is made easy to conduct experiments by plugging in the components in to the specifically designed breadboard. Should have built-in Function generator, power supply and required meters List of components Resistors SetPotentiometers Non-linear resistors VDR-, LDR-, NTC-, PTC resistors Capacitors SetTransformer 1 NO 13.1 Experiential Skilling Lab set Electrical Booth Spec - 01 Each workstation should have dimensions of 4 ft width and 6 ft height. The material used for the workstations construction must be high-quality plywood with a thickness of at least 10mm, ensuring durability and stability. The workstation should be designed in a plus-shaped configuration, where each arm of the plus symbol represents an individual training domain. The work station should have 4 station where, Electrical installation, Plumbing and CCTV installation can be practiced All necessaries aids for this training should be provided in this work station 1 NO 13.2 CCTV Installation kit To provide a comprehensive training setup for students to learn and practice the installation, configuration, and maintenance of CCTV systems, including cabling, DVR setup, and network integration for monitoring and recording. Dome Cameras –1 NoBullet Camera-1 NoDVR/NVR Unit -1 No Cables and AccessoriesPower Supply with adaptorsSwitch and RouterDisplay and MonitoringNetworking Tools 1 NO 13.3 Domestic Electric Wiring Kit To provide a comprehensive training setup for students to learn and practice the installation, wiring, and maintenance of domestic Electric wiring methods, includes reading and understanding electrical drawings, Switch gears and colour coding of cables. Domestic electric wiring kit – 1 set MCB, 4P, 25ADistribution Box 3 tier 36 modules RCCB 2P 40A 30mA ACtypeMCB xC60 1P 2A C 10000A6A 1-WAY SWITCH 6A 2-way Switch6A/16A 3-Pin Socket Outlet PVC Casing-Capping, 50mmPVC CasingCapping, 25mmPVC Conduit, High density, 19mmSaddles, 19 mmPOP screwPVC Junction Box 19mm, 1 wayPVC Junction Box 19mm, 2 wayPVC Junction Box 19mm, 3 wayPVC Junction Box 19mm, 4 wayBatten Holder2- Module Box with surface plate, PVC4-Module Box, PVC8-Module Box, PVCTools – 1 set 12V Cordless Drill machinePhilip bit Spirit Level, 30 cm Steel Rule, 30 Cm Wire Stripper Heavy duty cable cutter Try square Measurement tape Mini Hack Saw frame with blades Hack Saw Frame with blades Crimping tool, tube type lugs File Set Electrician knifeAllen key set Hole saw, 22 mm Screw Driver set Nose plier Drill Bit Set Mini screw driver set Aluminum Stair Case, 3 step 1 NO 13.4 Plumbing Installation Setup To equip a plumbing training lab with all necessary tools and equipment to provide students with hands-on experience in basic and advanced plumbing techniques, including pipe fitting, jointing, fixture installation, and system testing. Tools for Pipe Cutting and ShapingPipe Cutter:Hacksaw:Pipe Bender:PVC Pipe Cutting Scissors:Tools for Threading and JoiningPipe Threaded Set: Teflon Tape Dispenser:Plumbers Soldering Kit:Adhesive Application Kit: Wrenches and SpannersAdjustable Pipe Wrench:Basin Wrench:Ring Spanner Set:Testing and Measurement ToolsWater Pressure Gauge: Flow Rate Meter:Leak Detection Kit: Spirit Level:Plumbing Fixtures for Installation PracticeSink and Basin Fixtures:Faucets and Taps:Shower Unit: Drainage System ComponentsP-traps and S-traps:Wastewater Pipes:Junction Boxes: 1 NO 14 Smart Solar Renewable Energy Kit Solar Photovoltaic Training Kit for Lab experimentsPV Module Stand: 2nos. 1 NO 35 15 SAM S-5 Missile Educational Training Kit Missile defense systems are essential for national security, airspace protection, and strategic deterrence. This will explore the working principles of the missile system, focusing on its launch mechanism, guidance technology, and interception capabilities. Additionally, it will analyze the applications of the model in air defense, including target tracking, threat neutralization, and military strategy. SAM S-5 Missile System should consist of the following items. Raspberry Pi x 1Camera Module x 1Lidar or Ultrasonic sensor x 1 Servo MotorsGyroscope x 1Shooter x 1Battery x 1 Battery Adapter x 1 1 NO 16 GEO Satellite Communication Educational Training Kit Satellites play a crucial role in modern communication, navigation, weather forecasting, and scientific research. This will explore the communication and data transmission process in GEO satellites analyze the applications of GEO satellites in telecommunications, weather forecasting, and remote sensing. GEO Satellite Communication Kit should consist of the following items. Raspberry Pi x 3ESP8266 x 3ZigBee Module and adapter x 3 RF Module x 3 Temperature and Humidity Sensor x 2 Soil Moisture Sensor x 1 NPK Sensor x 1 Pressure Sensor x 2Co2 Sensor x 1Camera Module x 1Buzzer x 3 LEDsRover Model x 1Base station Model x 1Battery Battery Adapter 1 NO 17 LUNAR PATH Explorer- Educational Rover BOT It should comes with Matt finished metal chassis. Included all sensor metal clamps, and high torque DC Johnson A grade motors. Compatible with Arduino, raspberry, etc. Easy to assemble. Assembly manual provided in the kit. All required components, sensors, and tools are provided in the kit. It should consists of following items: 12V DC 10 RPM MOTORS -2ULTRASONIC SENSORS - 3IR SENSORS - 5 WIDE TRACK WHEELS - 4WIDE TRACK BELTNUT BOLTSSPANNER TWO IN ONE SCREWDRIVER,JUMPER WIRESSG90 SERVO MOTOR -1 ON/OFF ROCKER SWITCH -2TOGGLE SWITCH - 2MOTOR WIRES 1 NO 18 Package No. 1 Atal Tinkering Lab The package should include all items As per QR/specification for Package No. 1 - Atal Tinkering Lab of NITI AAYOG Electronics Development, Robotics, Internet of Things and Sensors approved by NITI AAYOG (Approved Copy of Qrs / Specification uploaded in Gem portal) Specification: Microcontrollers & Boards:Arduino Uno/Nano/Mega (or equivalents).Raspberry Pi 3 Model B+.ESP32, Node MCU.Prototyping Tools:Solderless breadboards (400 and 800 pins).Self-adhesive proto shield and FR2 A-grade materials.Hook-up wires, jumper cables (M-M, M-F, F-F), and alligator connectors.Sensors & Modules:Wide range of sensors: Humidity, temperature, motion, gas (MQ series), IR, ultrasonic, PIR, and more.RFID Reader, Bluetooth, GSM, GPS, and Wi-Fi modules.Capacitive touch, soil moisture, rain, and color recognition sensors.Displays & Actuators:16x2 LCD display with I2C interface. LED matrices, RGB LEDs, and various single-color LEDs.Motors: DC, stepper, servo, vibrating, and BO motor with driver modules.Miscellaneous Components: Resistor and capacitor kits, diodes, transistors, and ICs (LM555).Relays, motor drivers, and piezoelectric plates.Robotics, drone, and application-specific DIY kitsPower & Connectivity:USB cables, battery packs, power banks, and clips. 1 YES 19 Package No. 2 Atal Tinkering Lab – Rapid Prototyping Tools The Package should include all items As per QR/specification for Package No.2 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI AAYOG Specifications: 3D Printer Kit and tools Dedicated UPS/Power back up Filament for 3D printer Filament Storage Box Set of Arts & Crafts Accessories – e.g.- stationary items and basic prototyping materials 1 YES 20 Package No. 3 Atal Tinkering Lab – Mechanical, Electrical and Measurement Tools The package should include all items As per QR/specification for Package No.3 - Atal Tinkering Lab of NITI AAYOG Rapid Prototyping Tools approved by NITI 1 YES 36 AAYOG Specification: Cutting Tools: Hacksaw frame with blades (standard & mini).File set, mini file set, and flexible cutting mat. Hand Tools: Pliers (4.5-inch), tweezers, ball pein hammer, claw hammer, C-clamp, spanner set, Allen key set, wrench, and wire strippers. Drilling Tools: Drill machine set with workstation.Drill bit set and vice (normal). Screwdrivers & Soldering Tools: Precision screwdriver set, electric screwdriver set, soldering kit, and soldering helping hand. Measuring & Testing Tools: Digital multi meter, digital Vernier caliper, spirit level, measuring tape, and pen electric tester. Digital oscilloscope, adapters, telescope, DIY paper microscope Power Tools: Cordless rotary multi tool, dual-temperature heat gun, air blower, and hot glue gun.Organization & Workspace: Plastic trays, pegboard, and return measuring tools 21 Intel Core i5 - 1245U Mid Level Laptop - Notebook Specification: Laptop Type: Mid LevelIntel Core i5 - 1245UOperating System (Factory PreLoaded)Window 11 HomeRAM Size (GB)16Display Size (in cm) – Diagonal: 35.56 to 38.09 (14 In to 14.99 In)Capacity of Storage Drive (in GB)512 1 YES 22 65 Inch Display Interactive Panel with CPU Size (Diagonal): 65 or higher Panel Technology: IPS / VA Resolution: (Minimum) 4K (3840 x 2160) Viewing Angle (Hx V): 178*178RAM: 4 GB or higher On-board memory: 32 GB or higher Input (Minimum): 3 x HDMI, 4 x USB (Out of, which min 2xUSB3.0),1 xAudio, 1 x OPS slot, 1 x USB Type C Port Output: (Minimum) 1 x HDMI, 1 x Audio The software enables teachers to generate presentations using Al in PPT or PDF format. The teachers can select their Class, Subject, Topic and language to generate the presentations. The software supports all Indian and Global languages including English, Hindi, Marathi, Kannada, Tamil, Telugu, Gujarati, etc. Using Al, the software is able to analyse the Class and Subject and generate output accordingly. Using the Ask Me Anything tool, the teachers can search queries related to any topic and the Al is able to generate Class-wise and Subject-wise results including Images, Videos (YouTube Videos) and Explanation. Connected Classroom Software has in-built Generative Al capability to search and import filtered content relevant to Class and Subject. - images, videos, explanation for queries given by teachers in all languages. Teachers are able to import images and videos for teaching in class. The software has a text-to-speech function (for all languages) to convert text-based explanation into speech and read out loud in class. Software has Two-Way Live Conferencing Feature with education specific features Live conferencing feature also enables recording which gets directly uploaded to cloud.. Reports: Detailed reports for Attendance, Assessments, Study Material, are available for administrators to access. Administrators should be able to access to view the whiteboard saved by the teachers and monitor the usage.. Below tools and simulations are provided for enhancing the teaching-learning experience: - Graph: Demonstrating equations using 2D and 3D visualizations - Calculator: Standard and scientific - PHET simulation library with 100+ simulations across Maths, Physics, Chemistry, Biology. 1 YES 23 2 kVA OFF LINE UPS Supplying, erecting, testing & commissioning of OFF- LINE UPS system suitable for operation on 230V, 50Hz, A/C supply, with all accessories complete and Excluding batteries and wiring complete 1 YES 24 Battery 75/80 AH capacity Supplying, installation, testing & commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries. 1 YES 25 6Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 NO 37 26 8 Module Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 NO 27 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire with switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch 1 NO 28 Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. Point wiring using Copper wire without switch. Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box 1 NO 29 1.5 mm2 Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS694:2010 1 NO 30 Fans : 48 Sweep (1200 mm) Regular model Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system 1 NO 31 LED Down Light 15-18W Supplying of recess mounting non integrated type LED down light W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB with CCT 6500 degree K, CRI> 70%. efficacy >100 lumen per W, 120degree beam spread, life> 25000 burning hours and Compliance to IS10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level. LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp Wage, short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 V. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition. 1 NO 32 Fall Ceiling for Innovation lab to cover entire Area Providing and fixing in position 12mm thick plaster of paris (Gypsum anhydrous) for ceiling reinforced with hessian cloth flat surface with ceiling tiles up to a height of 5 m above floor level over aluminium strips 25mm x 6mm and rendered smooth with plaster of paris including cost of materials, labour, curing complete as per specifications. 1 NO 33 Floor Mat for Innovation lab to Cover the entire Lab Providing and laying linoleum plain flooring or coloured 3.2mm thick sheet / tiles laid with an approved adhesive on sub floor stretching, cutting and fixing complete , including cost of materials, labour, complete as per specifications 1 NO 34 Repair and Replacement of Windows and Doors (if required) Repairing door and window frames with available wood to the required size. 1 NO 35 Painting Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of Special primer applied @ 0.75 L/10 m² 1 NO 38 with paint of approved quality to give an even shade, after thoroughly rooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-ccharge. (The gloss should be 50% @ 60 degree angle with 10 years life) 36 Providing and laying Cement concrete flooring 40 mm thick with 20 mm nominal size stone aggregate using 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate) finished with a floating coat of neat cement,including cement slurry complete.(P No.59, SI.No 9.1 PWD SR 2023-24 Volume 2) 1 NO 37 Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:3 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish with a lead of 50m including curing cost of materials, labour, complete as per specification.( SI.No 8.33.1 PWD SR 2023-24 Volume 2) 1 NO 38 Polyurethane based ingle Component for Existing surface Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/Chajjas/Sunken portion of WC:Bathroom applied @ 1.2 l/per m2 , having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 l/m2 , and spreading 60 gsm geotextile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification (P No.A-149, SI.No 15.2 PWD SR 2023-24 Volume 1) 1 NO 39 Model Table - Modular Table with MDF Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface not to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 1 NO 40 Student Table - Modular Table with Particle Board Table Top and Metal Understructure Item Description:Providing and supplying PROGARCE Rectangular N.A Classroom tables Mode of supply assembled ready to use. Shape of the table Rectangular. Style of table supported by set of leges. Design of table with four legs and foot rest ring. Loading capacity of table top in KG (+-5 Kg) 150 Kg. Foot rest provided, Approval of advance sample (in respect of design) MATERIAL Table top material Ply wood. All side beeding on eddge of table top, 5 mm thick Teak wood Shoes material rubber. Padestal (under structure) Mild steel dquare section of outside side minimum 25 mm and wall thicknes sminimum 1.2 mm. Foot rest material Mild steel square section of size 25x25 mm and wall thickness minimum 1.6 mm. Leg material 25 mm MS pipe heavy duty. DIMENSION Table top length +- 10 (mm) 900 mm. Table top width +- 10 (mm) 600 mm. Table Height +- 10 (mm) 750 mm. Table top thickness 19 mm. MISCELLANEOUS Number of buffers four number at bottom. Wleding joint to be smooth fnished sharp edges to 1 NO 39 be removed - Free from objectionable projection or irregulatiries. Top to be ftted by welding. Number of Bolt 2 bolt in length side and 1 bolt in width side. Table placed on even surface not to wobble. Distance between legs length of table top (minus 75 mm) x width of table top (minus 75 mm). 41 Trainer Table - Executive Table with Pedestal, 3 Side Storage Unit 1 NO 42 Student Chair – Providing and supplying Unbranded wood chair/stool, already assembled Technical Specifcation Chair feature painting. Color-Other, Style Traditional. Furniture Assembly Already Assembled. Material Wood. Additional Parameters Additional Features good quality wooden arm chairs. 1 NO 43 Trainer Chair - Revolving Chair with Synchronic tilt mechanism 1 NO 44 Training of Teachers The Master Trainer will conduct a 2-day Training of Trainers (ToT) program for educators on effectively utilizing the Innovation Lab . The training should cover hands-on learning methodologies, STEM education, and practical applications of lab tools and technologies (P No.A-48, SI.No 1 PWD SR 2023-24 Volume 1) 1 NO 45 Technical Support 1 NO Schedule II Paystem, and the model should include an ESP8266, OLED display, ultrasonic sensor, and servo motor to detect and display nearby objects. The ultrasonic sensor, mounted on the servo motor, should continuously rotate from 0 to 180 degrees, scanning the surroundings for obstacles. As objects are detected, the system should display a dotted pattern on the OLED screen, similar to a submarine radar interface, providing a real-time visual representation of object proximity and location. The design must feature a durable plastic body for reliability, simulating sonar navigation and offering a dynamic way to monitor nearby obstacles through the rotating ultrasonic sensor and radar-like display. Its robust design ensures optimal performance in various environments, making it an excellent tool for obstacle detection and navigation. •Microcontroller: ESP8266 for processing and wireless capabilityDisplay: OLED screen with radar-like visual representationSensor: Ultrasonic sensor for object detectionActuator: Servo motor for 0°-180° scanning motionDetection Mechanism: Real-time scanning and obstacle mappingBody: Durable plastic for reliabilityOne pair of PCB and Mechanical

BRR : 9460338 Tender For Baragaon Nagar Panchayat Reorganization Water Supply Scheme Under Amrit 2.0; CIVIL WORK Pump House 2 Supply of all materials labour for Construction of Pumphouse (3.60 x 3.00 x 3.00 M) CUM Chloronating Room (2.80 x 1.50 x 3.00 M) Including all material labour t&p etc Complete as per design & drawing. As per type design of Jal Nigam as per direction of engineer incharge. 3 Supply of all materials labour for Construction of Additional Dozer Room at every zone for DMA (2..50 x 3.00 x 4.00 M) Including all material labour t&p etc Complete as per design & drawing. as per direction of engineer incharge 4 Supply of all materials labour for Construction ofMCS Room (8.00 x 5.00 x 4.00 M) Including all material labour t&p etc Complete as per design & drawing. as per direction of engineer incharge 5 RISING MAIN FOR ZONE 1 AND 2& BYE-PASS ARRANGEMENT 6 Supply of the following sizes of D.I. pipes Class K-9 conforming to latest I.S. 8329/2000 complete in all respect F.O.R. destination including all taxes and insurance including speials. 7 150 mm DI K-9 8 Supply of the following sizes of C.I. Double flanged sluice valves as per I.S. 780/1960 for testing 10kg/Sqcm F.O.R Destination including all taxes and Insurance. 9 150 mm. dia. 10 Excavation in ordinary soil (lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 10 KM from the center of the foundation trenches.as per direction of engineer incharge 11 Excavation for pipe line in all type of rock by chieselling /blastingincluding supply ofblasting materials and stacking properly useful materials with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within10 KM.as per direction of engineer incharge 12 Carting from the store (up to 8 Km.) The following sizes of D.I. double pipe K-9 and specials to the site of work lowering them in to trenches and laying true to alignment and gradient including jointing, testing of pipeline and including supply of jointing material such as nut & bolts, rubber insertion, white lead etc. com- plate but excluding cost of trenching and cutting of pipes etc. For making of lengths but including making joints. 13 150 mm. dia. 14 Carting of D/F Sluice valves of following sizes to the site of workslowering them into already prepared trenches and fixing them In position including supply of jointing materials such as bolt nut, rubber insertion white lead complete with excluding values and specials required but including the testing etc. complete excluding values and specials required but including the testing etc. complete. 15 150 mm. dia. 16 Supply of all materials, labour T&P etc. required and construct masonry type sluice valves chamber as per type design including supply and materials labour, T&P etc. complete. 17 Supply of all materials, labour, T & P etc. required and construct thrust blocks in RCC 1:2:4 at the bends and below the Valves. 18 Dismantling and reinstatement of following type of surface including sorting out and staking of serviceablematerials of disposal of unserviceable materials up to a distance of 50 m. as per direction of engineer incharge 19 BITUMINOUS ROAD 20 C.C. ROAD 21 Renovation of O.H.T. :- Dismantiling of OHT Flooring , Removing weak concrete hacked, roughended and clean thoroughly of OHT Coloumn for strenthening of OHT Coloumn M S or Iron Work in Plain work Supply of Aporxy resin for Old surface to joint new surface of cement concrete.Jacketing of Cement Concrete 1:1:5:3 Coment Course Sand, Stone Grit Thickness 60 mm Around old coloumn in OHT Including labour T&P etc complete.Construction of RCC foundation of Coloumn Pedestal with 1:1:5:3 cement concrete Dismantling of inner portion old plaster including disposal of malba (vertical wall, cone wall, bottom dome and top dome ).Repairing of Railing of Stair and Balcony with 20mm GI Pipe including changing of old pipe and reflexing new pipe, 12 mm thick Plaster 1:3 Cement and Course sand andwater Proofing Coumpond Chemical over the tank intenal wall and bottom dome to remove the leakage and seepage of tank(vertical wall, cone wall, bottom dome and top dome ). Changing of old & Damaged manhole cover including its fixing Scafoldingfor repairing & Painting of OHT, Dismantling/ Fixing of Inlet, Outlet, Over Flow washout pipe of OHT ,Changing of inlet outlet and washout unserviceable DI Pipe including dismantiling of old pipeand fixing of new pipe 40mm thick PCC (1:2:4) flooring with cement coarse sand and 20mm gauge stone ballast laid in pannels finished with 3mm thick floating coat of neat cement over base concrete 75mm thick consisting of cement, local sand 40mm brick ballast in 1:4:8 including Painting two coats of approved paint Apex Ultima or varnish including supply of all materials, labour and T&P etc required for Proper completion of the work in OHT. as per direction of engineer incharge 22 Design & Supply of all materials, T&P etc required for construction of specified capacity OHT with specified stagingas per following requirements:- 23 Capacity-As Specified in Item No 1.1 to 1.12Grading of OHT- M--35 The food grade epoxy coating of FOSROC / CIEBA GAIKI or reputated brand on the all inside surface area of water container after treatment of water tightness.Stair case- Seperate two column basedRCC staircase and 1 m wide balcony with box type RCC structure at the entrance of the staircase to protect the entry of unwanted persons & locking arrangement with MS door.Railings- 20 mm dia G.I. Pipe (medium quality steel tubes as per IS 1239) railing consisting of 3 rows of with posts height (50x50x6 mm MS angle) (1.0 m) of same pipe around stair case (both sides), balcony & at the top dome periphery, including epoxy 3mm thick coating above base coat, 65mm dia GI pipe (medium quality steel tubes as per IS 1239) ladder with FRP coating from opening of top dome to inside the tank and top of bottom dome. Supply and fixing of CI man hole cover with locking device at opening on the top dome to go inside the tank. Ventilator and Water level indicator - RCC ventilator with SS grill (10 sqm at the spacing of 30 mm) with steel mosquito mesh,electronic digitalwater level indicator with ultrasonic sensor including supply & fixing of solar energy arrangements. Lightening conductor- A good quality lightening conductor covered with PVC casing Vertical pipes- Inlet Pipe - 150 mm, outlet pipe - 250 mm, overflow - 150 mm & washout pipe - 100 mmC.I. D/F pipe as per design criteria upto 1 m beyond the apron, IVC/Kirloskar sluice valve on inlet, out let & at wash out pipe, duck foot bend, puddle collers and bell mouths. 10 mm thick & 150 mm wide S S plate clamp for fixing of verticle pipes with RCC columns (minimum 2 clamps between ends of each pipe). It also includes bye pass arrangement of OHT. The velocity in the pipes shall not exceed 1.5 m/sFlooring, Apron & Drain- 100 mm thick PCC of 1:2:4 & 100 mm thick CC of 1:1:2 with 6 mm thick glass strips not more than 1 sqm area upto 2 m from outer edge of the columns of OHT, drain of size 200 mm x 200 mm with 150 mm thick CC of 1:1:2 including necessary sluice valve chambers and pipe line required for proper drainage of rain water from the campus.Sluice valve chambers- 3 nos. of sluice valve chamber (minimum size 1.5 x 1.5 x 1.5 m or larger size as per requirements of site) of brick work with 200 mm thick RCC slab..Sluice valve chambers- 3 nos. of sluice valve chamber (minimum size 1.5 x 1.5 x 1.5 m or larger size as per requirements of site) of brick work with 200 mm thick RCC slab.Two coat apex painting over one coat primer of approved colour of asian / berger paints after fixing of RCC surface with grinder, repair of minor holes, unevenness etc. proper completion of work.Soil bearing capacity- Structure shall be design on the basis of maximum bearing capacity of 8 tonne/sqm or minimum as per actual on the basis of test report of soil bearing capacity. as per direction of engineer incharge 24 Sub Zone of Proposed OHT 18 m Staging ( Including 1m made of Gl or as per site condition ) 25 Proposed OHT Zone-II 400 kl Capacity and 18 m Staging 26 Cost of Testing for bearing capacity of soil for various sites of proposed OHT 27 DISTRIBUTION SYSTEM 28 Supply of following sizes D.I. K-7 pipes,as per I.S.- 8329/2000 or its Latest ammenmendsuitable for pipe with rubber gasket, coupling, coupler, including supply of specials DI DF/DI DS like Tees, Vertical / Horizontal Bend, Gap Pieces required for case of sectional testing etc and making S/S joints all materials T&P etc. all complete. as per I.S. F.O.R. destination including all local cartage etc complete.. ( Rising main Purpose ) 29 250 mm dia D.I.K-7 30 200 mm dia D.I K-7 31 Supply of the following HDPE Pipes as per B.I.S. code no. 4984/2016 or its latest amendment including cost of 1 HDPE coupler per pipe length and all bend , reducer, tee and all type of spacial which are required in Electro fusion joint fitting inclusive of all taxes and duties, 3rd party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges etc. F.O.R. destination etc. complete 32 180 mm dia HDPE PN10/PE100 33 160 mm dia HDPE PN10/PE100 34 140 mm dia HDPE PN10/PE100 35 110 mm dia HDPE PN10/PE100 36 Supply of following type of valves as per specifications F.O.R. desination rates per meter (exclusive of GST) in Rs. every where in UP upto stores of consignees inclusive of third party inspection charges, packing and forwarding charges, transit insurance charges, road transportation charges, unloading & stacking the same etc. complete.Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 37 250 mm dia 38 200 mm dia 39 150 mm dia 40 100 mm dia 41 Supply of the following sizes of C.I. Double flanged scour valves as per I.S. 780 class-1 working pressure 10 kg/Sqcm F.O.R Destination including all taxes and insurance. 42 80 mm dia 43 Supply of 50 mm dia screwed down type air valve with gun metal seat at site stone including all taxes. 44 Supply of underground sluice valves type fire hydrant consisting of 80 mm dia tail pieces, 80 mm dia duck foot band and 63 mm dia standard make iron coupling with cap and chain etc. complete to IS.369/1995 at site including all taxes. 45 Excavation for pipe line work in ordinary soil(lime, clay or sand Including lift up to 1.5m and lead up To 50m and refilling, watering, Ramming of excavated earth in to trenches and disposal of surplus earth up to 10 KM from the center of the foundation trenches. as per direction of engineer incharge 46 Excavation for pipe line in all type of rock by chieselling /blastingincluding supply ofblasting materials and stacking properly useful materials with lift up to 1.5 m and lead up to 50 m and including filling back, watering and ramming of excavated earth into the trenches and removal and disposal of surplus earth within 10 KMas per direction of engineer incharge 47 Dismantling and reinstatement of following type of surface including sorting out and staking of serviceablematerials of disposal of unserviceable materials up to a distance of 50 m. as per direction of engineer incharge 48 INTERLOCKING ROAD 49 BITUMINOUS ROAD 50 C.C. ROAD 51 Carting from store (upto 8 Km) the following sizes of D.1. Pipes (class K-9) and AC pipes (class-15) and specials to the site of work, lowering them in to trenches and taying true to alignment and gradient including testing of pipeline D.I. (K-9) pipes 52 250 mm dia D.I.K-7 53 200 mm dia D.I K-7 54 Carting of following pipes, specials and fittings from site store to site of work, lowering them into trenches, laying true to alignment and gradient, laying and jointing with electro fusion fitting of pipe line including cutting of pipe for making up lengths as required for proper completion of work. 55 180 mm dia HDPE PN10/PE100 56 160 mm dia HDPE PN10/PE100 57 140 mm dia HDPE PN10/PE100 58 110 mm dia HDPE PN10/PE100 59 Carting, lowering, laying, aligning, fixing in position and installation of following valves in pipe line including all material, labour, testing and commissioning as per direction of Engineer-in- charge. Double flanged Ductile Iron Sluice valves as per IS 14840 : 2000 60 250 mm dia 61 200 mm dia 62 150 mm dia 63 100 mm dia 64 Carting of scour valves to the site of workslowering them into already Prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete. 65 80 mm dia 66 Carting of 50 mm dia screwed down air valves of following sizes to the site of workslowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete. 67 Carting of 80 mm dia flanges fire hydrant of the site of workslowering them into already prepared trenches and fixing them In position including supply of Jointing materials such as bolt nut, Rubber insertion white lead complete with Excluding values and specials Required but including the testing etc. complete Excluding values and specials required but including the testing etc. complete. 68 Supply of all materials, labour T&P etc. required and construct masonry type sluice / scour valve chamber as per type design including supply and materials labour, T&P etc. complete. 69 Masonry type 70 Supply of all materials, labour T&P Etc. required and construct 350 x 350 x 500 mm size air valve chamber as per type design including supply and fixing the 500 mm dia CI manhole cover. 71 Supply of all materials, labour T&P Etc. required and construct 750 x 750 x 1000 mm size fire hydrant chamber as per type design including supply and fixing the 500 mm dia CI manhole cover. 72 Construction of thurst block in RCC 1:2:4 at bends & Tee in feeder main to DMAsincluding supply of all labour, material, T&P etc. complete as per the details given below :-No. of DMAs - 4Total no. of bends & Tee - 120 (considering 3 no. bends & Tee in each DMA)Qty. of concrete - 120 x 0.5 cum = 60 cum. (considering 0.5 cum concrete at each bend) 73 Repairing of drain/ public ramp/other miscellaneous structures which are coming in alignment of pipe line and damaged during the laying of pipe line including supply of all materials, labour, T&P etc. required for proper completion of the work. 74 Brick masonry in cement mortar 1:4 75 12mm thick plaster in cement mortar 1:4 76 Providing and laying in position reinforced cement concrete (mix 1:1.5:3)including batching, mixing, placing, vibrating, curing, formwork, finishing,including cost ofall material (Providing nominal reinforcement @ 0.15% of above itemincluding cutting bending, hooking the bars, binding with wires or tack welding and supporting as required etc. complete (including cost of binding wire and MS Bar)) and labour, tools and plants required with transportation, loading, unloading,etc., complete for all leads and lifts etc required for proper completion of the work. 77 Provision for crossing of Nalas (0.5mto 2.0 m width) for laying of pipe line including necessary specials, T&P and arrangement of diversion of water, baricatings etc required, with dismantelling of drains and reconstruction of same as per type design of the existing drain. 78 0.3 - 0.5 m 79 0.5 - 1.0 m 80 1.0 - 1.5 m 81 1.5 - 2.0 m 82 Making House Connection in Distribution main including Dismantling of Road, Supply, carting of Specials lowering them into trenches, fixing them including bailing out of water necessary labour, T&P etc. required for proper completion of worksas per direction of engineer incharge 83 250 mm dia D.I.K-7 84 200 mm dia D.I K-7 85 180 mm dia HDPE PN10/PE100 86 160 mm dia HDPE PN10/PE100 87 140 mm dia HDPE PN10/PE100 88 110 mm dia HDPE PN10/PE100 89 Provision of Shifting water house hold connection. 90 For140 mmto 160 mm dia 91 For110 mm dia 92 Barricading of pipe line trenches by using 2 m high hard MS barricading board 2.5x2.0 M, with red flags, Glow-caution boards, diversion boards & red lights. 93 BOUNDARY WALL, GATE SITE DEVELOPMENT & APPROACH ROAD 94 Construction of compound wall comprising of RCC Columns @ 3.0 m c/c distance with beam at plinth and top, brick work in 1:4 of as per type design including supply of all material, labour, T& P etc complete ( 2m height above plinth level 230 mm thick brick wall )as per direction of engineer incharge 95 Supply and fixing 3.60 m wide MS main gate & 1.0 m wide a wicket gate with RCC Columns as per type design & drawing including primer and painting, meterial, labour, T&P etc all complete, as per direction of engineer incharge 96 Supply and Carting of additional earth required to fill up the site to the required formation level At Zone -I and At Zone -II including leveling dressing ramming with proper compection work completed. as per direction of engineer incharge 97 Provide all materials, labour T&P etc. required for proper completion of work and construction of interlocking approach road in water works campous. At Zone -I and At Zone -IIas per direction of engineer incharge 98 Construction of 250X250 mm size drain at W/W sites At Zone -I and At Zone -IIas per direction of engineer incharge 99 GENERAL RESIDENTIAL QUARTERS 100 Construction of staff quarters (1 G.F) including other miscellaneous works. The plinth area of each staff quarter is 57.706 sqm. As per jal nigam type designas per direction of engineer incharge 101 construction ofStaff Quarter at Zone-I 102 construction ofStaff Quarter at Zone-II 103 E AND M WORKS 104 CONSTRUCTION OF NEW TUBEWELL (ZONE-1) 105 Resistivity and hydrological Survey 106 Transportation from store: 107 Transportation, Erection, Dismantiling of DC/RC/DTH Rig machine 108 Transportation, Erection, Dismantiling of 150 PSI Compressor 109 Transportation, Erection, Dismantiling of 1 Cusec / 3 Cusec OP Unit and Yield test 110 Drilling of Tube well bore : 111 Drilling and reaming of 600mm dia bore from GL to 60 m BGL by DC method 112 Bentonyte Powder Bags 113 Tube Well Assembly : 114 M.S. Tubewell Assembly with all required parts like planin pipe, slotted pipe, rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. 115 300mm dia M.S.E.R.W. houseing plain pipe of wall thickness 7.1 mm. 116 Lowering of Tube well Assembly 117 Electrical logging of the bore 118 Lowering of 300mm. Dia M.S. housing pipe G.L. to 59 mtr. BGL 119 Supply of 1.6 to 4.8mm size pea gravel and shrouding of tube well 120 Development of Tube well 121 By Air Compressor 122 Development of Tube well by 150 PSI capacity air compressor 123 By Over Pumping Unit 124 Development of Tube well by OP Unit 125 Chemical & Bacteriological test of water 126 PUMPING MACHINARY TO FEED 400 KL OHT (ZONE-1) 127 SITC of Pumping Plant including, panel, cable, complete in all respect with all required material T&P labour etc. (1000LPM , 61 m Head , 2900RPM, 25 H.P) 128 SITC of Main piping & Valves with 24 mtr. Column pipe, Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 150 mm dia 129 TOOLS (REPUTED MAKE ) IN A TOOL KIT - 1 Set1. Pipe wrenches - 2 No.2. D/E Spanner 22/6 mm - 6 Pcs3. Adjustable wrench 300 mm- 1No.4. Screw driver5. 250 mm- 1No.6. 200 mm - 1No.7. 150 mm- 1No.8. Combination pliers 200 mm- 1No.9. Nose pliers 150 mm - 1No.10.hammer with handle 1 kg.- 1No.11. Line tester (Taparia make)- 1No. 130 SITC of Soft Starter with RS 485 Port- 400 V Class, 18.5 KW, Rating 131 SITC of Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank. ( SCADA Compatible ) 132 SITC of Motor Operated Actuator with Sluice Valve - 150 mm size 133 SITC of CE/UL Certified Electromagnetic Flowmeter-150 mm size 134 SITC of Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable 135 SITC of Auto Phase reversal unit with inbuilt time delay & enclousare ( confirm to IEC:60947-1 & IEC:-60947-b-1) 136 125 Amp Rating 137 ElectricalWorksfor Zone-1 138 Electrical System ( For Tubewell ) 139 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - internal & external lighting of 01 tubewell as follows:- 140 Indoor Lighting 141 Surface Mounting 142 Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD < 10 % , p. f.≥ 0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard 143 Suspended Mounting / Surface Mounting 144 36W LED light fixture 2×2 with acrylic / prismatic front cover. 145 Outdoor Lighting 146 Supply and fixing of all in one solar LED light fixture with integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate Battary wih BIS approved make. Luminaire should be secondary optic lences for better distribution with delivered efficacy of > 100 lumen per watt. Bidder shall have in house R & D Laboratory which is recognised by Ministry of Science & Technology Department , Govt of India/NABL.Bidder shall in house pole and luminaire manufacturing facility.Luminaire can be supplied with hybrid switch along with indicator to understand the source of power ( either from solar or AC supply).All the above should be integrated and should 1 system. 147 Compact Solar LED Street Light- 60W(MONO)18V / 12.8V27Ah /40W for TW & MCS 148 Complete wiring of Pump house with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc. 149 Complete earthing / lightning protection system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories 150 Electrical System ( MCS ) 151 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - internal & external lighting of MCS as follows:- 152 Indoor Lighting 153 Surface Mounting 154 Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD < 10 % , p. f.≥ 0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard 155 Suspended Mounting / Surface Mounting 156 36W LED light fixture 2×2 with acrylic / prismatic front cover. 157 Providing & Fixing of Heavy duty capacitor start, copper wind Double ball bearing 900/1400 RPM single phase Exhaust fan as per PWD specification for electrical Works, conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required.(For MCS) 158 450mm sweep (900/1400 RPM) 159 Outdoor Lighting 160 Supply and fixing of all in one solar LED light fixture with integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate Battary wih BIS approved make. Luminaire should be secondary optic lences for better distribution with delivered efficacy of > 100 lumen per watt. Bidder shall have in house R & D Laboratory which is recognised by Ministry of Science & Technology Department , Govt of India/NABL.Bidder shall in house pole and luminaire manufacturing facility.Luminaire can be supplied with hybrid switch along with indicator to understand the source of power ( either from solar or AC supply).All the above should be integrated and should 1 system. 161 Compact Solar LED Street Light- 60W(MONO)18V / 12.8V27Ah /40W for TW & MCS 162 Complete wiring of MCS with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc. 163 Instrumentation Worksfor Zone-1 164 Automation of Proposed OHT ( 400 KL ) with DMA 165 Supply of Motor operated actuator without sluice valve at OHT outlet :- Supply of DI/DF Electrically integrated actuater without sluice valve (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 166 250 mm dia 167 Supply of flow control valve with electric actuator for flow controling,pressure monitoring and web based with cable PLC etc Complete at DMA inlet. 168 200 mm 169 Supply of dismantling joint as per requirement and departments approved drawing and specifications, including machining and rubber ring and suitable for 16 kg/cm2 working pressure with required flanges of suitable side with nut and bolt etc. complete. The joint should have long bolts so that during normal working pressure there should be no sliding movement of sliding flanges LOF (length over flange) should not be less than 75% of dia at DMA inlet. 170 200 mm 171 Supply of CE/UL Certified level transmitter for OHT :- Supply of Radartype leveltransmitter with CEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 172 Supply of CE/UL Certified Electromagnetic flow meter at DMA inlet :- SupplyofCE/ULFullBore ElectromagneticFlowMeterofapproved make for remote placesof following dia and specificationscomplete:Media: Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable and also interfacing with PLC panel. 173 200 mm dia 174 Supply of CE/UL Certified Pressure transmitter at DMA inlet :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 175 Supply of Dosing System at DMA inlet :-Supply of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.( SCADA Compatible ) 176 Supply of Residual chlorine analyser / meter at DMA inlet :-Supply of RCA must have automatic sensor cleaning facility at pure water sump and Interfacing with PLC panel. Residual Chlorine meter shall comprises of 3 components i.e. sensors, flow through assembly and transmitter with indicator andgives 2 outputs one to Local display & other to PLC including Mounting arrangement.Overall Range : 0 - 8 mg/l (ppm)Accuracy : 2% of full scaleSupply Voltage : 230 V ac+B7Output : 4-20 mAMembrane free sensor of 2 gold plated electrodes for long term stability and reference electrode (ag/Agcl) must beprovided to avoid maintenance. IP 65 Nema 4 housing protection class required. 177 Installation, cabling of OHT including all equipments with all power and control cable,testingand commissioning complete in all respect. 178 Master Control Station (MCS) 179 CE & BIS approved manufacturers industrial grade LCD monitor with latest configuration as per specification of size 65 180 Desktop/PC as per spec. mentioned 181 CE/UL approved manufacturers 5 KVA UPS with batteries as spec. mentioned for Computer as per requirement 182 Full development version of required TAGS SCADA Software with customization of software for MCS as per requirement as per specification mentioned. 183 CE & UL approved manufacturers control room PLC with CPU & power supply at MCS in IP65 enclosure as per spec. mentioned 184 CE/UL certified field gateway agent for transfering data from MCS to control room 185 GSM based wireless / broadband/Equipment communication system for PLC capable to transfer and gather data from remote sites to control stations, including all accessories complete 186 CE/UL approved manufacturers Firewall for network protection 187 Lightning surge protector for ethernet communication protection 188 CE/UL approved manufacturers industrial grade ethernet switch 189 Mobile App facility system architecture complete. 190 Canon/HP 1018/equivalent Laser printer 191 Security Survelliance IP camera 192 Installation, testing and commissioning with required furniture,Air Conditioner etc 193 Automation of Tubewells (Zone-1) 194 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 195 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 196 CE & UL certified Inteligent Smart Energy Meter 197 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 198 CE & UL certified pressure transmitter 199 CE & UL certified Surge protector for above control panel 200 CE/UL approved manufacturers 3 KVA UPS with batteries as spec. mentioned for Computer as per requirement 201 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 202 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT both. 203 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 204 Installation, commissioning & testing for tubewells 205 AUTOMATION OF DMA (ZONE-1) 206 CE & UL Certified PLC/RTUin IP 54 enclosure suitable to Communicate with GSM based modem unit withCPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 207 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 208 CE/UL Certified Intelligent energy meters 209 CE/UL Certified Surge protector for control panel 210 CE/UL Certified 1 KVA UPS with batteries as per technical bid documents 211 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 212 Control Panel with IP-54 Protection, industrial grade for all equipment. Separate for control (24V) and power equipments 213 Cable 214 (i) Complete cabling 215 Security Survelliance IP Camera with recorder (optional) 216 Installation, commissioning & testing 217 CONSTRUCTION OF NEW TUBEWELL ( ZONE-2) 218 Resistivity and hydrological Survey 219 Transportation from store: 220 Transportation, Erection, Dismantiling of DC/RC/DTH Rig machine 221 Transportation, Erection, Dismantiling of 150 PSI Compressor 222 Transportation, Erection, Dismantiling of 1 Cusec / 3 Cusec OP Unit and Yield test 223 Drilling of Tube well bore : 224 Drilling and reaming of 600mm dia bore from GL to 60 m BGL by DC method 225 Bentonyte Powder Bags 226 Tube Well Assembly : 227 M.S. Tubewell Assembly with all required parts like planin pipe, slotted pipe, rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. 228 300mm dia M.S.E.R.W. houseing plain pipe of wall thickness 7.1 mm. 229 Lowering of Tube well Assembly 230 Electrical logging of the bore 231 Lowering of 300mm. Dia M.S. housing pipe G.L. to 59 mtr. BGL 232 Supply of 1.6 to 4.8mm size pea gravel and shrouding of tube well 233 Development of Tube well 234 By Air Compressor 235 Development of Tube well by 150 PSI capacity air compressor 236 By Over Pumping Unit 237 Development of Tube well by OP Unit 238 Chemical & Bacteriological test of water 239 PUMPING MACHINARY TO FEED 450 KL OHT (ZONE-2) 240 SITC of Pumping Plant including , panel, cable, complete in all respect with all required material T&P labour etc. (1000LPM , 61 m Head , 2900RPM, 25H.P) 241 SITC of Main piping & Valves with 24 mtr. Column pipe, Painting, Tools with wiring of pump house (internal & external) complete in all respect with required material, T&P labour, chain pully and gauges. - 150 mm dia 242 TOOLS (REPUTED MAKE ) IN A TOOL KIT1. Pipe wrenches - 2 No.2. D/E Spanner 22/6 mm - 6 Pcs3. Adjustable wrench 300 mm - 1 No.4. Screw driver5. 250 mm - 1 No.6. 200 mm- 1 No.7. 150 mm - 1 No.8. Combination pliers 200 mm - 1 No.9. Nose pliers 150 mm - 1 No.10. hammer with handle 1 kg. - 1 No. 243 SITC of Soft Starter with RS 485 Port- 400 V Class, 18.5 KW, Rating 244 SITC of Supply and fixing of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank. ( SCADA Compatible ) 245 SITC of Motor Operated Actuator with Sluice Valve - 150 mm size 246 SITC of CE/UL Certified Electromagnetic Flowmeter-150 mm size 247 SITC of Servo voltage stabilizer oil cooled having capacity 40 KVA fully copper winding three phase A.C supply 50 Hz. Input voltage 240-450 output voltage 415 volt +/- 1% withearthling wire and power cable 248 SITC of Auto Phase reversal unit with inbuilt time delay & enclousare ( confirm to IEC:60947-1 & IEC:-60947-b-1) 249 125 Amp Rating 250 Electrical Worksfor Zone-2 251 Electrical System ( For Tubewell ) 252 Complete lighting system including energy efficient lighting fixtures, lighting poles, wires, conduits, cables, and necessary accessories - internal & external lighting of 01 tubewell as follows:- 253 Indoor Lighting 254 Surface Mounting 255 Providing & Fixing of IP40 LED Surface/ Recessed / suspended mounting Mid power SMD type LED Light fixture made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non - yellowish diffuser for uniform light distribution. High efficiency with 2.5 KV internal/external surge protection BIS certified isolated driver having efficiency > 85%, with Short & Open circuit protection and in compliance to IEC standards (Integral with light fixture). System lumen efficacy of ≥ 120 Im/Watt, THD < 10 % , p. f.≥ 0.95,CRI >80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K / 16000° / 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard 256 Suspended Mounting / Surface Mounting 257 36W LED light fixture 2×2 with acrylic / prismatic front cover. 258 Outdoor Lighting 259 Supply and fixing of all in one solar LED light fixture with integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate Battary wih BIS approved make. Luminaire should be secondary optic lences for better distribution with delivered efficacy of > 100 lumen per watt. Bidder shall have in house R & D Laboratory which is recognised by Ministry of Science & Technology Department , Govt of India/NABL.Bidder shall in house pole and luminaire manufacturing facility.Luminaire can be supplied with hybrid switch along with indicator to understand the source of power ( either from solar or AC supply).All the above should be integrated and should 1 system. 260 Compact Solar LED Street Light- 60W(MONO)18V / 12.8V27Ah /40W for TW 261 Complete wiring of Pump house with 1.5 sqmm and 2.5 sqmm with multistarned copper conductor 1.1 KV with required 6A,16A switches,sockets,MCCB etc. 262 Complete earthing / lightning protection system including earth electrode, earth strip, wires, junction box for test links, treated and non-treated earth pits, etc. with necessary accessories 263 Instrumentation Worksfor Zone-2 264 Automation of Proposed OHT ( 450 KL ) with DMA - Zone-2 265 Supply of Motor operated actuator without sluice valve at OHT outlet :- Supply of DI/DF Electrically integrated actuater without sluice valve (Totally enclosed,weather-proofanddustproofconstructionwithIP-67, protectionclass suitable for installationin any positionwithout lubrication,leakageorotheroperationaldifficultywithspecialgrease filledgearboxandsuitableformanualoperationforemergencywhich will automatically dis-engage on restoration of power to motor and with10wattsingle phase spaceheaterandcontinuouslocalmechanical positionindicatorandindividuallyreplaceablecountergearassembly and with two torque and four limit switches with S.S. flap and operated withgeardrivencamsandofrating250Volt,5Amp,AC/DC,torque switch dialand with TEFC squirrel cageinduction) operatedsuitable to SCADAoperationsluicevalvehavingbodydoorcoverof gradedincast irontoIS:210Gr.Fg.260bodyanddoorringsofSSASTMA743Gr.CF8 andbearingblockofleadedtinbronzetoIS:318Gr.LTB2hingepinof stainlesssteelAISI:431.ValvesgenerallyconformtoIS:5312.Flangesto bedrilledasperIS:1538Part-IV&VI. Valves aresuitable for hydrostatictestpressureof10Kg./Cm2 forseatand15Kg./Cm2for body(PN-1.0)of following sizes 266 250 mm dia 267 Supply of flow control valve with electric actuator for flow controling,pressure monitoring and web based with cable PLC etc Complete at DMA inlet. 268 200 mm 269 Supply of dismantling joint as per requirement and departments approved drawing and specifications, including machining and rubber ring and suitable for 16 kg/cm2 working pressure with required flanges of suitable side with nut and bolt etc. complete. The joint should have long bolts so that during normal working pressure there should be no sliding movement of sliding flanges LOF (length over flange) should not be less than 75% of dia at DMA inlet. 270 200 mm 271 Supply of CE/UL Certified level transmitter for OHT :- Supply of Radartype leveltransmitter with CEmarkedwith following technical parameters and Interfacing with PLC panel including mounting arrangement.Output-4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDRange- 0 to …30... mtrsAccuracy - +/- 0.25% of Full Scale or better Enclosure- IP 68 272 Supply of CE/UL Certified Electromagnetic flow meter at DMA inlet :- SupplyofCE/ULFullBore ElectromagneticFlowMeterofapproved make for remote placesof following dia and specificationscomplete:Media: Water (Raw/ Chlorinated), Pressure:upto1.0 MPa,Processtemp:-50degC, Flow/MeterTube:SS304, Electrode:SSAISI316L/ HastelloyC276/ Tantalum, Lining Material : Hard Rubber/ Neoprene/ Poly-urethane(PU), Flange: SS /CS, FlangeStandard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Càst Aluminium,with anticorrosivepaint&providecompletely sealed (leak proof) constructionasperrequirement‘ofIEC 60529, Accuracy : + 0.5 % M.V. velocity0.3to10m/s,Transmitter/signaconvertor Enclosure :Die CastAluminium, Power Supply: 80-240 V AC-5OHz,Output1: 4-20 mA,Output2:Pulse,CommunicationOutput:RS485/Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parametersand totalizer value during power failure, Protection category- IP 68for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, cable and also interfacing with PLC panel. 273 200 mm dia 274 Supply of CE/UL Certified Pressure transmitter at DMA inlet :- Supply of CE/UL Certified pressure transmitter CE markd with following technical parameters and Interfacing with PLC panel includingmounting arrangement. Output 4-20 mA / HART Power supply - 24V DC ext. Display - 4 LEDAccuracy - +/- 0.1 % of full scale or better Enclosure- IP 68 275 Supply of Dosing System at DMA inlet :-Supply of Electro Mechanical type Chemical dosing system 0 to 6 LPH capacity on working pressure 4kg/cm2 to feed Sodium hypo chloride complete set with 100 Litre solution tank.( SCADA Compatible ) 276 Supply of Residual chlorine analyser / meter at DMA inlet :-Supply of RCA must have automatic sensor cleaning facility at pure water sump and Interfacing with PLC panel. Residual Chlorine meter shall comprises of 3 components i.e. sensors, flow through assembly and transmitter with indicator andgives 2 outputs one to Local display & other to PLC including Mounting arrangement.Overall Range : 0 - 8 mg/l (ppm)Accuracy : 2% of full scaleSupply Voltage : 230 V ac+B7Output : 4-20 mAMembrane free sensor of 2 gold plated electrodes for long term stability and reference electrode (ag/Agcl) must beprovided to avoid maintenance. IP 65 Nema 4 housing protection class required. 277 Installation, cabling of OHT including all equipments with all power and control cable,testingand commissioning complete in all respect. 278 Automation of Tubewells (Zone-1) 279 CE & UL Certified PLC/ RTU in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & Power supply with analog & digital parameter & features as specified, for each tubewell/ OHT & stand alone OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations. 280 G.S.M./G.P.R.S. based wireless communication with 4G modem for RTU/ PLC Capable to transfer and gather data from remote sites to control stations all accessories included with signal enhancer anteena made for pumping plant internet charges. 281 CE & UL certified Inteligent Smart Energy Meter 282 CE & UL certified Hydrostatic type sub soil water level transmitter for tubewell. 283 CE & UL certified pressure transmitter 284 CE & UL certified Surge protector for above control panel 285 CE/UL approved manufacturers 3 KVA UPS with batteries as spec. mentioned for Computer as per requirement 286 CE & UL certified 7 HMI touch screen suitable to communication with PLC/RTU local display and control of process parameter. 287 Complete cabling of tubewell including all power and control cables of all equipment at pump house and OHT both. 288 Control panel with IP-54 protection industrial grade for all equipment separate for control (24V and power equipments) 289 Installation, commissioning & testing for tubewells 290 AUTOMATION OF DMA (ZONE-2) 291 CE & UL Certified PLC/RTUin IP 54 enclosure suitable to Communicate with GSM based modem unit withCPU & Power Supply with analog & digital parameter & features as specified for each ZPS/OHT to store and transmit data on GSM backbone, RTU/PLC designed with logic to transfer data at multiple stations with control panel as specified in tender technical specification. 292 GSM / GPRS based wireless communication with 4G modem for RTU/PLC Capable to transfer & gather data from remote sites to control stations all accessories including with signal enhancer antanna made for pumping plant internet charges as specified in tender technical specification. 293 CE/UL Certified Intelligent energy meters 294 CE/UL Certified Surge protector for control panel 295 CE/UL Certified 1 KVA UPS with batteries as per technical bid documents 296 CE/UL Certified 7 touch screen suitable for communication with PLC/RTU for local display & control of process parameters. 297 Control Panel with IP-54 Protection, industrial grade for all equipment. Separate for control (24V) and power equipments 298 Cable 299 (i) Complete cabling 300 Security Survelliance IP Camera with recorder (optional) 301 Installation, commissioning & testing 302 TRAIL & RUN (Without Electricity) for03 Months Trial & Run for Zone-1,2