BRR : 7904801 Repair/ Renovation To Various Residential Buildings Under Division No.Iii Shimla. (Sh -Repair Of Set No. 18 19 I/C C/O Toilets, , Tiles Work Misc Work Etc Near Nh Circle At Balakwali At Chaura Maidan Shimla.) Repair/ Renovation To Various Residential Buildings Under Division No.Iii Shimla. (Sh -Repair Of Set No. 18 19 I/C C/O Toilets, , Tiles Work Misc Work Etc Near Nh Circle At Balakwali At Chaura Maidan Shimla.) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand) : 4 Graded Stone Aggregate 20 Mm Nominal Size) , Brick Work With Common Burnt Clay Selected F.P.S. (Non Modular) Bricks Of Class Designation 7.50 In Exposed Brick Work Including Making Horizontal And Vertical Grooves 10Mm Wide 12Mm Deep Complete In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Above Plinth Level Upto Floor All Level Complete As Per Directions And Approval Of Engineer-In-Charge Including Carriage Of Materials Within All Leads And Lifts , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundations Cement Mortar 1:4 (1 Cement : 4 Coarse Sand)Complete Including Carriage Of Material Within All Leads And Lifts. , Providing Wood Work In Frames Of False Ceiling, Partitions Etc. Sawn And Fixed In Position With Necessary Stainless Steel Screws Etc.Complete. Including Carriage Of Materials Within All Leads And Lifts.:- Sal Wood. , Steel Work Including Hollow Section Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Including Hollow Section Etc. As Required Upto All Floor Levels In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works All Complete As Specified And As Directed By The Engineer-In-Charge Upto All Floor Levels Including Carriage Of Materials In All Leads And Lifts. , Providing And Fixing 50Mm Dia M.S Pipe Hand Rail Slip Resistent With Round End At Two Levels At 75Cm And 90Cm Height As Per Approved Architectural Drawings And Design Complete Upto All Floor Levelsas Specified And As Directed By The Engineer-In-Charge Upto All Floor Levels Including Carriage Of Materials In All Leads And Lifts. , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To 18: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand), Jointing With Grey Cement Slurry 60 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete.Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer), With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Brand & Manufacturer, In All Colours And Shade, In Skirting, Riser Of Steps, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is: 15477, In Average 6 Mm Thickness, Including Grouting Of Joints (Payment For Grouting Of Joints To Be Made Separately). Size Of Tile 300X450 Mm , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:6 (1 Cement: 6 Fine Sand) , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc. 15 Mm Dia Nominal Bore (Internal) , Providing And Fixingbrass Unions: 15 Mm Nominal Bore.Including Carriage Of Materials Within All Leads And Lifts. , Constructing Manhole With R.C.C Top Slab In 1:2:4 Mix In 1 Cement 2 Sand 4 Graded Stone Aggregate 20Mm Nominal Size) Foundation Concrete1:4:8 (1Cement 4 Sand 8 Graded Stone Aggregate 40Mm Nominal Size Inside Plastering 15Mm Thick With Cement Mortar 1:3 (1Cement 3 Sand)Finished With A Floating Coat Of Neat Cement And Making Channels Inconcrete 1:2:4 Mix(1Cement 2 Sand 4 Graded Stone Aggregate 20Mm Nominal Size) Finished Smooth Complete Including Curng And Testing:- Inside Size 800Mm X 800Mm And 500Mm Deep Including 455X610mm Dia Precast R.C.C. Covers Of Ntc Make Or Equivalent Manhole Coverwith Frame (Medium Duty) With 200Mm Thick Walls Of Brick Masonry Using Common Burnt Clay Building Bricks In Cement Mortar 1:3 (1 Cement : 3 Sand)Including Carriage Of Materials Within All Leads And Lifts. , Providing And Fixing High Pressure Pvc (Finolex) Type B And Socket Watse And Ventilating Pipe Icluding With Approve Dadhesive Comple.150 Mm Nominal Inner Dia Pipes , Providing And Fixing High Pressure Pvc (Finolex) Type B And Socket Watse And Ventilating Pipe Icluding With Approve D Adhesive Complete .110 Mm Nominal Inner Dia Pipes , Providing And Fixingpvc Collars Isi Marked Including Fixing With Approved Adhesive Etc.Complete Including Carriage Of Materials Within All Leads Andlifts:-110Mm Dia. , Disposal Of Moorum/Building Rubbish/ Malba/ Similar Unserviceable, Dismantled Or Waste Material By Mechanical Transport Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground For Lead Upto 10 Km For All Lifts, Complete As Per Directions Of Engineer-In-Charge.

BRR : 7892844 Repair/Renovation To Various Residential Buildings Under Division No.-Iii, Shimla (Sh - Providing And Fixing Windows, Repair Of Wc/Bath, Repair Of Flooring, Steel Work In Ground Floor Parking And 1St Floor Balcony And Verandah, Painting Repair/Renovation To Various Residential Buildings Under Division No.-Iii, Shimla (Sh - Providing And Fixing Windows, Repair Of Wc/Bath, Repair Of Flooring, Steel Work In Ground Floor Parking And 1St Floor Balcony And , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) C277shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Sal Wood. Including Carriage Of Materials Within All Leads And Lifts , Providing Wood Work In Frames Of False Ceiling, Partitions Etc. Sawn And Fixed In Position With Necessary Stainless Steel Screws Etc.Complete. Including Carriage Of Materials Within All Leads And Lifts.:- Rae Wood/Chill Wood. , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-Incharge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Teak Wood Wood 35 Mm Thick Shutters , Providing And Fixing Wire Gauge Shutters Using Galvanized M.S. Wire Gauge Of Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm, For Doors, Windows And Clerestory Windows With Hinges And Necessary Screws Including All Leads And Lifts And As Directed By Theengineer-In-Charge. : Teak Wood Wood 35 Mm Thick Shutters , Providing And Fixing 35Mm Thick Flush Door Shutter Complete Including Screws And Fittings Etc. Complete Including Carriage Of Materials In All Leads And Lifts , Supplying And Fixing Glass Panes With Putty And Nails Including Removal Of Broken Glass Panes Wherever Necessary Including Carriage Of Materials Within All Leads And Lifts. 8.00 Mm Float Glass Panes , 5.00 Mm Float Glass Panes , Providing And Fixing 40X12 Mm Section Wooden Moulded Beading To Door And Window Frames With Iron Screws, Plugs And Priming Coat On Unexposed Surface Etc. Complete. 2Nd Class Teak Wood , Providing And Fixing 50X12 Mm Section Wooden Moulded Beading To Corners Of Ceiling And Partitions Etc. With Iron Screws, Plugs And Priming Coat On Unexposed Surface Etc. Complete. 2Nd Class Teak Wood , Providing And Fixing 300X16mm Brass Sliding Doorbolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete , Providing And Fixing Brass Tower Bolts Anodized Trans Parent Or Dyed To Required Shade And Colour With Screws Etc. Complete 300X10mm , 250X10mm , Providing And Fixing Brass Handles Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete 250Mm. , 200Mm , 150Mm , Providing And Fixing Brass Eye Hook For Windows With Fittigs Etc. Complete Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing Godrej Door Lock With Latch Lack Lever Of Approved Quality Complete Fittings Etc. Complete Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing 65X35mm Special Quality Bright Finished Brass Godrej Cup Board Locks Or Wardrobe Locks With Six Levers Including Necessary Screws Etc. Complete Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing 100Mm Bright Finished Brass Floor Door Stopper With Rubber Cushion Scerws Etc. To Suit Shutter Thickness Complete. Including Carriage Of Materials Within All Leads. , Providing And Fixing Hydraulic Door Closer Of Godrej Make Or Equivalent Including Its Accessories Etc. Including Fixing Properly With Shutter Complete As Per The Requirement Of Site And As Per The Direction Of Engineer-In-Charge , Providing And Fixing Sheesham Wood Top Rail For Stair Of Size 80X50mm Complete Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing Sheesham Wood Ornamental Balusters For Wooden Stairs Of 1.15M Length And Section Of 100X100mm Complete With Fittings Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing Sheesham Wood Ornamental Balusters For Wooden Stairs Of 0.75M Length And Section Of 70X70mm Complete With Fittings Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing 12Mm Thick Imported Pine Wood Ceiling/ Panneling With Tongued And Groovedjointing Of Standard Quality Isi Mark And Approved Shade And Colour Complete Including Carriage Of Material Within All Leads And Lifts , Providing And Laying 1.50 Mm Thick Pvc/Rubber Tiles Flooring Plain, Coloured. Corbed Or Mosaic Or Mattled Finish, Laid With Approved Adhesive On Sub Floor Damp Proofing Treetment(To Be Measured Separately)For Payment Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Bajajleen Non Wooven Flooring Covering To Floor Having Pile Height 5.5Mm And Weight 1450-1550 Grm Per Sqm. Plain Or Coloured Laid With An Approved Adhesive On Sub Floor Including Cutting And Fixingcomplete To Sub Floor Including Damp Proofing Treatment (Damp Proofing Treatment To Be Measured Separately For Payment) As Per The Direction Of Engineer-In-Charge Including Carriage Of Material With In All Leads And Lifts , Providing And Fixing M.S. Bp Sheet 1.66Mm To 2Mm Thick In Eaves Board/Facia/ Soffits/Ceiling Including Cutting, Fixing And Welding To Steel Roof Members And Applying A Coat Of Red Lead Primer Complete As Per The Instruction Of Engineer-In-Charge , Removing White Or Colour Wash By Scrapping And Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Completeincluding Carriage Of Materials Within All Leads And Lifts , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete Within All Leads, Lifts Of Materials , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : Old Work (One Or More Coat Applied @ 1.67 Ltr/10 Sqm). Including Carriage Of Materials Within All Leads And Lifts , Melamine Polishing On Wood Work Two Or More Coats Applied On New Work Complete Including Carriage Of Materials Within All Leads And Lifts.As Per Direction Of Engineer-In-Charge , Melamine Polishing On Wood Work One Or More Coats Applied On New Work Complete Including Carriage Of Materials Within All Leads And Lifts.As Per Direction Of Engineer-In-Charge , Providing And Fixing Curtain Of Superior Quality Ofd Decor As Per Approved Sample Including Quality , Design And Shade Etc. Of Specified Length And Standard Width Including Stitching With Approved ,Curtain Tape And Curtain Rings Etc. Completein All Respectand As Per The Direction Of The Engineer In Charge Having Following Sizes. Size 2.25 To 2.50 Mtr Length. , Providing And Fixing Wall Ceiling Floor Cpvc Pipe (Heavy Duty) Tube Fittings And Clamps Including Making Good The Wall Ceiling And Floors Including Carriage Of Materials Within All Leads And Lifts. 15Mm Nominal Bore , Providing And Fixing High Pressure Pvc Finolex ( Type-B) Spigot And Socket, Waste And Ventilating Pipes Isi Marked Including Fitting With Approved Adhesive Etc. Complete Including Carriage Of Materials Within All Leads Andlifts:- (I)75 Mm Dia , Providing And Fixingpvc Finolex (Type-B) Collars Isi Marked Including Fixing With Approved Adhesive Etc. Complete Including Carriage Of Materials Within All Leads And Lifts. 75Mm Dia , Providing And Fixingpvc Finolex (Type-B) Plain Bend Isi Marked Including Fixing With Approved Adhesive Etc. Complete Including Carriage Of Materials Within All Leads And Lifts. 75Mm Dia , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type) With Seat And Lid, 10 Litre Low Level White Vitreous China Flushing Cistern & C.P. Flush Bend With Fittings & C.I. Brackets, 40 Mm Flush Bend, Overflow Arrangement With Specials Of Standard Make And Mosquito Proof Coupling Of Approved Municipal Design Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required , Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To Eureopean Type W.C. Of Quality And Make As Approved By Engineer - In - Charge. Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Single Lever Telephonic Wall Mixer 15Mm Nominal Bore Hole Of Jaqar Cat No.- Flp-5267No Of Approved Quality And Makeincluding Complete In All Respect , Providing And Fixing Wall Mixer 15Mm Nominal Bore Hole Of Cat No.- Mqt520kn Of Approved Quality And Makeincluding Complete In All Respect , Providing And Fixing 350Mmx350mm Flat Back Vitreous China Wash Basin Of Jaquar Cat No.- 801/301 With Single Hole For Pillar Tap With C.I. Or M.S.Brackets Painted White Including Cutting Holes And Making Good The Same But Excluding Fittings Including Carriage Of Materials Within All Leads And Lifts , Providing & Fixing 32Mm Dia, Pvc Waste Pipe For Wash Basin Or Sink Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Looking Mirror Of Size 600Mmx450mm With Plastic Frame (Superior Quality) Including Backing Support And Fixing With Screws Etc At Site As Directed By Engineer-In-Charge Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing 600Mmx120mm Acraylic Glass Shelf Of Cat No.- Ac-307 With C.P. Brass Bracket And Guard Rail Complete, Fixed To Wooden Plugs With C.P. Brass Screws Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Jaquar Towel Rail Of Cat No.- Akp-35711 Ps Complete With C.P. Brass Brackets Fixed To Wooden Plugs With C.P. Brass Screws Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Jaquar Towel Ring Of Cat No.- Akp-35721 P Complete With C.P. Brass Brackets Fixed To Wooden Plugs With C.P. Brass Screws Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Jaquar Towel Rack Of Cat No.- Akp-35781 Ps Complete With C.P. Brass Brackets Fixed To Wooden Plugs With C.P. Brass Screws Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Jaquar Tumbler Holder Of Cat No.-Akp-35741P Of Approved Quality Complete Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Acrylic Soap Dispensar Of Of Viking Complete Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing Jaquar Soap Dish Of Cat No.-35731 P With Brackets Fixed To Wooden Cleats With C.P. Brass Screws Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Jaquar Basin Mixer Of Cat No.- Slbm 35011 Bpm Complete Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing Jaquar Bib Cock Of Cat No.- Kup35037 Pm Complete Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing Jaquar Angle Cock Complete Including Fittings Etc, Complete Including Carriage Of Materials In All Leads And Lifts .Cat No35053 Pm , Providing And Fixing 15Mm Dia Nominal Bore Viking 18 Connection Pipe Complete With Brass Union Complete Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing 100Mm Cp Grating Of Approved Quality Including Carriage Of Materials Within All Leads And Lifts

BRR : 7904816 Annual Repair Maintenance of To Various Residential Buildings Under Division No-Iii, Shimla. (Sh- Repair Of Wood Work, Repair Of Tiles, Repair Of Ceiling And Flooring, Painting And Distempering Etc. In Common Block-83,83A, Block-2 Set No. 12 17 Block-17 A/R M/O To Various Residential Buildings Under Division No-Iii, Shimla. (Sh- Repair Of Wood Work, Repair Of Tiles, Repair Of Ceiling And Flooring, Painting And Distempering Etc. In Common Block-83,83A, Block-2 Set No. 12 17 , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Leadcomplete Including Carriage Of Materials Within All Leads And Lifts.For Thickness Of Tiles 10 Mm To 25 Mm , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Leadcomplete Including Carriage Of Materials Within All Leads And Lifts.For Thickness Of Tiles 10 Mm To 25 Mm , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level :1:3:6 (1 Cement : 3 Coarse Sand) : 6 Graded Stone Aggregate 20 Mm Nominal Size) Complete Including Carriage Of Materials In All Leads And Lifts , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). 2Nd Class Deodar Wood , Providing Wood Work In Frames Of False Celling Partitions Etc. Sawn And Put-Up In Position 2Nd Class Deodar Wood. Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-Incharge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Deodar Wood Wood 35 Mm Thick Shutters , Providing And Fixing Wire Gauge Shutters Using Galvanised M.S. Wire Guage Of Is. Gauge Designation 85 G. With Wire Of Dia 0.56 Mm For Doors Windows And Clerestorey Wondows Including Bright Finished Black Namelled Iron Hinges With Necessary Screws Etc. Complete Including Carrage Of Material Within All Leads And Lifts. 35 Mm Thick In2nd Class Deodar Wood , Providing And Fixing 12Mm Thick Water Proof Kit Ply Of Standard Quality Isi Mark And Approved Shade And Colour In Panelling & Wall Linning I/C Mitring At Junctions, Butt Jointing And Nails Complete (Frame Work For Base To Be Measured & Paid For Separately) Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing 6Mm Thickply Wood Lining With Butt Jointing And Nails (Frame Work And Cover Fillets To Be Measured And Paid For Separately) Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing 19Mm Thick Commercial Board In Shelves/Box For Cup Board With Butt Joints & Fixing With Nails & Screws Etc Complete) Including Carriage Of Materials Within All Leads And Lifts. , Providing And Fixing 19Mm Thick Commercial Board Shutters For Cup Boards I/C Fixing With Nickel Plated Piano Hinges With Screws Etc Complete) Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing 1.00 Mm Thick Coloured Or Plain Lamination Sheet (Sunmica) On Boards/Ply Wood Sheets With Approved Adhesive And Nails Etc Complete Including Carriage Of Materials Within All Leads And Lifts. , Providing And Fixing Hard Wood Square Edges Cover Fillets (Beading) 19Mmx6mm Section I/C Mitring At Junctions With Wood Screws And Nails Complete Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 250X16mm , Providing And Fixing Aluminium Tower Bolts (Barrel Type) With Necessary Screws Etc. Complete :Including Carriage Of Materials Within All Leads And Lifts.(I) 200X10mm , Providing And Fixing Aluminium Handles, Isi Marked,Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete Including Carriage Of Materials In All Leads And Lifts. 150Mm , 125Mm , Providing And Fixing Magnetic Catcher Of Approved Quality In Cupboard / Ward Robe Shutters, Including Fixing With Necessary Screws Etc. Complete Including Carriage Of Materials In All Leads And Lifts. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete , Providing And Laying 1.50 Mm Thick Pvc/Rubber Tiles Flooring Plain, Coloured. Corbed Or Mosaic Or Mattled Finish, Laid With Approved Adhesive On Sub Floor Damp Proofing Treetment(To Be Measured Separately)For Payment Including Carriage Of Materials Within All Leads And Lifts , Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete Size Of Tile 600Mm X 600Mm. , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Includingpointing In White Cement Mixed With Pigment Of Matching Shade Complete , Providing And Laying Polished Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing , Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge , Making Rounded/ Half Rounded Nosing In Granite/Kota Stone Complete. 20Mm.Thick Including Carriage Of Materials Within All Leads And Lifts , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade One Or More Coats On Old Work Complete Including Carriage Of Materials Within All Leads And Lifts , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture Complete Including Carriage Of Materials In All Leads And Lifts , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade One Or More Coat Applied Of Approved Brand And Manufacture Complete Including Carriage Of Materials In All Leads And Lifts , Providing And Fixing Wall Ceiling Floor Cpvc Pipe (Heavy Duty) Tube Fittings And Clamps Including Making Good The Wall Ceiling And Floors Including Carriage Of Materials Within All Leads And Lifts. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required :W.C. Pan With Isi Marked White Solid Plastic Seat And Lid , Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To Eureopean Type W.C. Of Quality And Make As Approved By Engineer - In - Charge. Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing Plastic Seat (Solid / Hollow Type) And Cover For Wash Down Water Closet With C.P. Brass Hinges And Rubber Buffers Including Carriage Of Materials Within All Leads And Lifts :-Solid Type :-White Plastic Seat And Cover , Providing And Fixing 550Mmx400mm Flat Back Vitreous China Wash Basin With Pedestal And Brackets Painted White Including Cutting Holes And Making Good The Same But Excluding Fittings Including Carriage Of Materials Within All Leads And Lifts , Providing & Fixing 32Mm Dia, Pvc Waste Pipe For Wash Basin Or Sink Including Carriage Of Materials Within All Leads And Lifts , Providing And Fixing 45Cm Length Upvc Connection Pipe With Brass Unions 15 Mm Nominal Bore Complete Including Carriage Of Materials Within All Leads And Lifts. , Providing And Fixing 100 Mm Dia Chromium Plated Grating Of Superior Quality For Floor, Gully Or Nahani Trapincluding Carriage Of Materials Within All Leads And Lifts , Providing And Fixing 15Mm Dia C.P.Brass Angle Cock Of Approved Quality Including Carriage Of Materials Within All Leads And Lifts. , Providing And Fixing 15 Mm C.P Brass Pillar Tap With Capstan Head Long Body Including Carriage Of Materials Within All Leads And Lifts. , Providing And Fixing 15Mm Dia C.P.Brass Two Way Angle Cock Of Approved Quality Including Carriage Of Materials Within All Leads And Lifts. , Disposal Of Building Rubbish/ Malba/Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 Mm Initial Lead, For All Leads Including All Lifts Involved.

BRR : 9595724 Tender For Annual Civil Maintenance Works At K.M.C Borough-Ii Office- 1 BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 10. Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 2 SECTION 1. BUILDING WORKS (I) PLASTERING, POINTING ETC. A. ORIGINAL WORKS 1.Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](iii) With 1:3 cement mortar (b) 15 mm thick plaster 3 SECTION 1. BUILDING WORKS (J)WHITE WASH, COLOUR WASH, DISTEMPER A. ORIGINAL WORKS 7 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. (In Ground Floor) (a) One Coat i) Water based interior grade Acrylic Primer.[This item to be done under specific instruction of the Superintending Engineer] 4 BUILDING WORKS (K) PAINTING, VERNISHING ETC?(B)MISCELLANEOUS ITEMS.(5)(b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) 5 SECTION 1. BUILDING WORKS (J)WHITE WASH, COLOUR WASH, DISTEMPER A. ORIGINAL WORKS 10 Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturers specification) including cleaning and smoothning of surface. Two Coats 6 BUILDING WORKS (D) Flooring B. REPAIR AND REHABILITATION 9. Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed. 7 BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLES ETC 2. Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m In ground floor including roof. (a) upto 150 mm. thick 8 ORDINARY CEMENT CONCRETE ( MIX 1:2:4 ) WITH GRADED STONE CHIPS ( 20 MM NOMINAL SIZE) EXCLUDING SHUTTERING AND REINFORCEMENT, IF ANY, IN GROUND FLOOR AS PER RELEVANT IS CODES (BASED ON PWD SCHEDULE OF RATES, W.E.F. 01.11.2017 WITH CORRIGENDA DT.04.06.2018) 9 BUILDING WORKS (D) Flooring A. ORIGINAL WORKS 36. Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturers specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be suppliedby the contrr]e) I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. (A) Deep Colour & White. Note: 2. Add extra for each addl, floor over the rate for item 35 & 36 of subhead A. (i) upto 4 th floor-Rs 5/ Sq.m(i) above 4 th floor-Rs 6.25/ Sq.m 10 BUILDING WORKS (D) Flooring A. ORIGINAL WORKS 35. Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall. With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative. Note: 2. Add extra for each addl, floor over the rate for item 35 & 36 of subhead A. (i) upto 4 th floor-Rs 5/ Sq.m (i) above 4 th floor-Rs 6.25/ Sq.m 11 BUILDING WORKS(D) Flooring..A. ORIGINAL WORKS?(17)18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m](Add extra for each addl, floor over the rate for item 22, 25, 26, 17, 20, 31, 32 & 15 of subhead A. (I) upto 4 th floor- Rs. 12/-per Sq.m II) above 4th floor -Rs. 16/- per Sq.m 12 BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film. I) Natural white. h) Louvered window. i) Top, bottom and side member. 13 BUILDING WORKS(R) ALUMINIUM WORKS???(1)Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film. I) Natural white. h) Louvered window. ii) Louvered Section. 14 BUILDING WORKS(R) ALUMINIUM WORKS??(2)Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminiumsections for the following units:-(A) Glazed aluminium sliding windows made of extruded and annodizedalloy aluminium sectios, fabrications, including cutting to proper shapeand size, drilling and aligning of window shutter frame fitted with in builtlocking arrangements, sliding rollers and other necessary fittings, fixture,adhesives and joineries along with extruded neoprine or EPDMgasketing in between window frame and masonry work (walls, column,beam.lintels etc.) as well as between glass and shutter frame for fixingglass and Polysulphide sealant and in between shutter and window framewhere necessary including cutting to requisite size and fixing glass asper drawing, specification and direction of EIC.The rate includes the hire charge of all tools and plants, including allincidental charges, adhesive, joineries such as screw, cleat angle etc. butexcluding the cost of extruded aluminium sections, glass, neoprene /EPDM gasket, locking arrangement and rollers. v ) Louvered window.Note: Add extra for each Addl. Floor over the rate of item 2A, 2B, 2Cand 2D except 2A(vi)i) Upto 4th Floor Rs.12.00 per Sq.mii) Above 4th Floor Rs.16.00 per Sq.m 15 BUILDING WORKS (E) ROOFING, SHEET WALLING &WATERPROOF TREATMENT . A. ROOFING & SHEETWALLING 15. Supplying, fitting & fixing circular corrugated Aluminium sheet (excluding the supporting frame work) of approved make & brand in alloy 3105 conforming to IS: 1254-1991 fitted and fixed with 55 mm & 25 mm Self tapping screw ,EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (Aluminium sheet to be supplied by contractor). (i) In Roof:- c) With 0.91 mm thick sheet 16 (B) - SANITARY AND DRAINAGE WORKS.(B)-(III) WATER CLOSETS AND URINALS.a) Original Works.(6)Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.(ii) 470 mm X 280 mm X 340 mm 17 (B) - SANITARY AND DRAINAGE WORKS.(B)-(III) WATER CLOSETS AND URINALS.a) Original Works.(12)Supplying, fitting and fixing urinal flush pipe fittings of approved brand.(a) C.P. urinal flush pipe fittings range of one 18 (B) - SANITARY AND DRAINAGE WORKS.(B)-(III) WATER CLOSETS AND URINALS.a) Original Works.(3)Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.(a) With P trap (with vent)...N.B. For W.C. with trap without vent the rate will be reduced by Rs.25.00 19 SECTION (A) - PLUMBING WORKS (A)-(IV) CISTERN, G.I.TANKS WITH PARTS Item No. (a) Original Works Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make without fittings and brackets. 20 SECTION(A) PLUMBINGWORKS (A)(V) BASIN AND SINKS WITH PARTS (a) Original Works 2 Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size 21 SECTION(A) PLUMBINGWORKS (A)(V) BASIN AND SINKS WITH PARTS (a) Original Works 9 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long 22 SECTION(A) PLUMBINGWORKS (A)(V) BASIN AND SINKS WITH PARTS (a) Original Works 10 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (i) 600 mm long 23 PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 19(I) Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia) (b) 20 mm 24 PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 19(I) Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes (Dia) (d)32 mm 25 BUILDING WORKS(M) DRAIN, DOWN PIPES, CHIMNEY ETC?.(C). ADDITIONAL RATE?(21)Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. 26 BUILDING WORKS(M) DRAIN, DOWN PIPES, CHIMNEY ETC?.(C). ADDITIONAL RATE?(21)Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.B) UPVC Fittings:c) Bend 87.5 degree. (ii) 110 mm. Dia 27 BUILDING WORKS(M) DRAIN, DOWN PIPES, CHIMNEY ETC?.(C). ADDITIONAL RATE?(21)Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.B) UPVC Fittings:b) Plain Y.(ii) 110 mm. Dia. 28 BUILDING WORKS(M) DRAIN, DOWN PIPES, CHIMNEY ETC?.(C). ADDITIONAL RATE?(21)Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.B) UPVC Fittings:a) Plain Tee(ii) 110 mm. Dia. 29 SECTION(A) PLUMBING WORKS (A)(V (A)-(V) BASIN AND SINKS WITH PARTS (a) Original Works 19 Supplying, fitting and fixing pillar cock of approved make. a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 30 PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 7. Supplying, fitting and fixing bib cock or stop cock. (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar 31 PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 7. Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 32 BUILDING WORKS ( C ) Brickworks,Concrete Works etc B. CONCRETE WORKS 3. Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. (This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly a) 3.90 metre height 33 BUILDING WORKS ( C ) Brickworks,Concrete Works etc B. CONCRETE WORKS 3. Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge. (This item should be executed only after prior approval of the Engineer-incharge). Firstly, one number to be paid and then labour rate for shifting up to further nineteenth (19) times @ 10% each time to be considered. If necessary further after twenty times of total use, another one number new and labour rate for shifting to be considered accordingly b) Extra for additional 3.6 height or part thereof 34 BUILDING WORKS (G) WOOD AND PVC WORKS F. REPAIR WORKS 1..Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 4 mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor a) False Ceiling (with 4mm thick Fibre Cement Standard Ceiling Board and EGrid T-2430/1510).(For upper floors refer to item H (4) for items 1 to 7 under subhead F) 35 BUILDING WORKS. (T)MISCELLANEOUS WORKS: B. MAINTENANCE WORKS : 10)Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately). (c) Large plant of girth of exposed stem above 150 mm. but not exceeding 225 mm. lift upto 6 mtr. Note : For lift beyond initial 6 mtr. the rate will be increased @ 20% for each additional lift if 6 mtr. or part thereof. 36 BUILDING WORKS ( C ) Brickworks,Concrete Works etc..C. REPAIR AND REHABILITATION WORKS?Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturers specified rate) for concrete of various grades. 37 Sub Total 38 GST 18% 39 CESS 1%

BRR : 8119659 Tender For Miscellaneous Civil Works In Humanities And Social Science Dept. (Roof Treatment, False Ceiling, Painting, Aluminium Sliding Window Etc.), Cubical Partition In Physics Dept. And False Ceiling In Seminar Room - Demolishing cement concrete manually/ by mechanical means including disposal of materials with in 50mtr lead as per direction of Engineer in Charge. Cement concrete 1:3:6 or richer Mix 2 Dismantling old plaster orskirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50mtr lead 3 Providing and finishing with 12mm cement plaster of mix 1:4 ( 1 cement : 4 Sand) 4 Providing and laying in position Reinforced cement concrete of specified grade excluding the cost of centering and shuttering. Cement concrete in 1:2:4 (1 Cement : 2 sand:4 Coarse Aggregate 20mm Down) complete in all respect as per direction of Engineer in charge. 5 Providing and laying Vitrifiedfloor tiles in different sizes(thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours shade laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including pointing the joints with white cement and matching pigment etc. complete as per direction of Engineer-in-Charge. Sizes of Tile 600 x 600 mm 6 Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4 sand) bedding in laying of floor tiles 7 Fixing glazed /ceramic /vitrified floor tiles with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477 using 5 kg Adhesive per Sq.M of tile area in average of 3mm thick ness 8 Providing and fixing aluminium work for doors and windows ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene flt etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge (glazing and panelling to be paid separately): (Section :DOOR : V:[email protected]/mt, Top: 114.30x44.45x1.35 @1.139Kg/mt, Bottom:114.30x44.45x1.49 @1.19Kg/mtr, middle: 100x44.45x2.0 @1.603Kg/mtr///Fixed Section: Top/Bottom: 63.5x38.1x1.5@ 0.861kg/mtr, Middle double groove: [email protected]/m/// Door frame:101x44.45x1.60 @1.301Kg/mtr/// Casement window: frame: 38x46x1.4 @0.622kg/m, mullion: [email protected]/m, 44x46x1.4mm @0.575kg/m, clip [email protected]/m///) Powder coated aluminium (aluminium thickness of powder coating 50Micron) For fixed Portion 9 Providing and fixing aluminium work for doors and windows ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene flt etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge (glazing and panelling to be paid separately): (Section :DOOR : V:[email protected] kg/mt, Top: [email protected]/mt, Bottom:114.30x44.45x1.49 @1.19Kg/mtr, middle: 100x44.45x2.0 @1.603Kg/mtr/// Fixed Section: Top/Bottom: 63.5x38.1x1.5 @0.861kg/mtr Middle double groove: [email protected]/m /// Door frame: 101x44.45x1.60 @1.301Kg/mtr/// Casement window: frame: [email protected]/m, mullion: [email protected]/m, [email protected]/m, clip [email protected]/m///) Powder coated aluminium (minimum thickness of powder coating 50Micron). For shutters of doors , windows & ventilators including providing and fixing of hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required (fitting shall be paid separately) 10 Providing and fixing aluminium work half glazed with 5.0mm thick glass pane and half poanelled with prelaminated particle board (Nova board) as per IS 12823 grade 1 type II in panelling for doors and windows ventilators and partitions with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene fillet etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge (all fittings such as hinges handle and beading etc all are included and measured in Sq.M) ((((DOOR : V:[email protected] kg/mt, Top: [email protected]/mt, Bottom [email protected] Kg/mtr, middle: [email protected]/mtr)))). For shutters of doors , windows & ventilators including providing and fixing of hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprene gasket required. 11 Providing and laying APP (Atactic polypropylene polymer) modified prefabricated five layer minimum 3mm thick waterproofing membrane , mineral top finished reiforced with non-oven polyster matt manufactured by Bitumat co. Ltd, Suprema general membranes ,Tamko,Sika India pvt ltd ,STP ltd,Hydrotech ltd,Dr. fixit , prodorite ltdor equivalent, consisting of a coat of bitumen primer for bitumen membrane @ 0.40 ltr /Sqm by the same membranemanufacture of density at 25°C , 0.87-0.89 kg/ltrand viscosity 70-160 cps. over the prime coat , the layer of membrane shall be laid usingButane torchand sealing all jointsetc and preparing the surface by filling undulations with cement mortar (1:6) andcuring the surfacecomplete in all respect ( to be paid separately ) and as per direction of Eng-in-charge. 12 Providing and fixing of sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall tretment Aluminum fluted strips 3.15mm thick 150mm wide 13 Providing and fixing of sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall tretment Aluminum fluted strips 3.15mm thick 200mm wide 14 Providing Filling the Expansion joint with joint sealing compound on polyeurathane based or equivalent including a backup material like Thermocole / Celatex board inside the groove of expansion joints. The width to depth ratio of sealant should be 2:150mm gap 15 Providing Filling the Expansion joint with joint sealing tape (Combiflexor equivalent ) including a backup material like Thermocole / Celatex board inside the groove of expansion joints Complete as permanufacturers Specificationand direction of Engineer in Charge. 50mm gap 16 Providing and fixing of sheet covering over expansion joints with iron screws as per design to match the colour /shade of wall tretment. ACP sheet fluted strips 3 mm thick 200mm wide 17 Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS12823 grade 1 type II in panelling fixed in aluminium doors windows shutters and partition frames with CP brass /stainless steel screws etc complete as per architectural drawing and direction of EngineerinCharge. Prelaminated particle board with decorative lamination on one side and balancing lamination on other side. 18 Providing and fixing of glazing in aluminium door window ventilator shutters and partition etc with PVC /neoprene gaskets etc complete as per architectural drawingand the direction of the Engineer in Charge (Cost of aluminium snap beading shall be paid in basic item)With float glass panesof 5.5 mm thickness 19 Providing and fixing of glazing in aluminium door window ventilator shutters and partition etc with PVC /neoprene gaskets etc complete as per architectural drawingand the direction of the Engineer in Charge (Cost of aluminium snap beading shall be paid in basic item)With float glass panesof 4.0mm thickness 20 Filling gap in between aluminium frame and adjacent RCC/ Brick /Stone work by providing weather silicon sealant over backer rod of approved quality as per architecural drawings and direction of Engineer in Charge complete. Upto 5mm depth and 5mm width 21 Providing and fixing aluminum round shape Designer handle of 200mm size with ss screws etc complete as per direction of Engineer in Charge.Anodized (AC 15) Aluminium 22 Providing and fixing SS patch fitting lock for glass doorof godrej/link (best quality of approved make for toghened glass doors including cutting and making goodetc and fixingwith ss screws etc complete as per direction of Engineer in Charge 23 Providing and fixing of IS 12817 marked stainless steel butt hinges with stainless steel screw etc complete100x58x1.90mm 24 Providing and fixing of IS 12817 marked stainless steel butt hinges with stainless steel screw etc complete 75x47x1.70mm 25 Providing and fixing of IS 12817 marked stainless steel butt hinges with stainless steel screw etc complete 50x37x1.50mm 26 Providing and fixing ISI marked aluminium butt hinges anodised coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with necessary screws etc complete: butt hinges(Heavy type) with necessary screw etc complete as per direction of Engineer in Charge. 125x75x4mm 27 Providing and fixing of aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shades with necessary screw etc complete as per direction of Engineer in Charge. 250x10mm 28 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screw etc . Complete: 250x16mm 29 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS 1868) transparent or dyed to required colour or shade with necessary screw etc. complete: 100mm 30 Providing and fixing aluminum hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour and shade with necessary screws etc complete: Double rubber stopper 31 Dismantling aluminium/ gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unservicable materials and stacking of servicable materials within 50mtr lead as directed by Engineer-in-Charge. 32 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair to scratches etc complete 33 Providing and fixing at all heightfalse ceiling excluding cost of frame work made of special sections power pressed from M.S sheet and galvanised in accordance with zinc coating of grade 350 as per IS 277 with 25mm long drive all screw @230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufacturer specification and also including the cost of making opening for light fittings and grills, diffusers, cutouts made of frame of perimeter channels suitably fixed all complete as per drawing and specification and diretion of Engineer in Charge including the cost of painting with oil bound distemper.12.54mm thick tapered edge gypsum fire resistant board conforming to IS 2095-Part-I 34 Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I chanels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c,including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufactures specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with: 8 mm thick Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. 35 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design andpatterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metalT-Grid of hot dipped galvanised iron section of 0.33mmthick(galvanized@120gramspersqmincludingbothsides)comprising ofmain-Trunners of size 24x38 mm of length 3000 mm,cross-Tofsize24x32mmoflength1200mmandsecondaryintermediate cross-Tof size 24x32 mm of length 600mm to formgrid module of size 600 x 600 mm, suspended from ceiling usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50 mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in-Charge. With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles 36 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread offlame of Class Acategorywith property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and lengthcomplete as per direction of Engineer-In- Charge.Frame size 65 x 100 mm 37 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimumcompressive strength50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread offlame of Class Acategory with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all complete as per direction of Engineer-In- Charge. 30 mm thick 38 Providing and fixing 1.5 mm thick Laminates (MARINO)glossy finish or simple mat finish as per requirement and direction of EngineerinCharge with adhesive of approoved make complete as and where required cost including all wastage and adhesive etc complete. 39 Applying one coat of acrylic primer of approved brand and manufacturer on wall surface as per manufacturers specification. 40 Providing and finishing wall/ceiling surface with acrylic wall care putty (water based) of approved make (Birla or Equivalent) and finished smooth and even surface to receive painting including cost of scaffolding staging charges with all cost of materials taxes labour T&P etc complete 41 Distempering with 1st quality acrylic distemper (readymade) of approved manufacture and of required shade and colour complete, as per manufacturers specification. New Work( Two or more coats ) 42 Conveyance of materials such as dismantled materials, garbage, rubbish, stone metalrefuse etc. including labour for loading and unloading beyond the initial lead complete as per direction of Engineer-in-charge. Truck load upto 2 km