BRR : 7946971 Tender For Work of replacing damaged door frames in house number 6/12, Type-4, located in Upper Dalibagh Colony, work of installing mesh doors, work of aluminium partition in balcony for security purposes - Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DAR 9.21.1 2 Providing and fixing of 35, mm thick UP Teak Wood Jali Door and Window Shutter withheavy quality S.S. Jali with necessary beading, including supply and fixing of wooden cleats and stopper and including fixing and adjustment of hinges, bolts, locks handles, spring & or otherfitting but excluding their supply etc. Painting two Coats of Black Japan on All Frame fitting in necessary etc. Complete work as Per Direction of E/I. 3 Providing and Fixing of aluminium work for doors, window, Ventilators and Partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS:733 and ISl;1285, Fixing with dash fasteners of required dia and size, including necessary filling up the gape at junctions, i.e. at top, bottom and sides with required EPDM rubber/neorapan gascket etc. aluminium section shall be smooth rust free straight mistred and jointed machanically whrever required including clear angle, aluminium snap beading for glazing/Paneling, C.P. Brass/Stainless Steel Screws, all complete as per architectural Drawing and the directions of Engineer-in-charge. (Glazing, Paneling and dash fasteners to be Paid for Separately) (For Fixed Portion) Power coated Aluminium (minimum thickness of power Coating 50 micron) DAR-21.1.2.2, 4 Providing And Fixing Float Glass Panes 6.00 mm thick Glass Panes, (DAR-9.7.7.2) 5 Providing and fixing of glazing in Aluminium door/window, Ventilator shutter and Partitions etc, with EPDM Rubber/ neoprene gasket etc, complete as per the architectural drawings and the direction fo E/I (Cost of aluminium snap beading shall be paid in basic item with APC Sheet (Aluminium Power Coated Sheet). 6 Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Sl.N0-10.2, (Rs-75) 7 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) DAR 14.5.1

BRR : 9440940 Tender For Under The Eco-Tourism Development Work Of Ranipur Tiger Reserve, Construction Of Luxury Tent Area, Landscape For Parking (Lawn Area), Cane Bench And Interpretation Center Work., 1 Luxury Tent Area 2 ExcavationEarth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the 2.8.1 All kinds of soil. PWD LUCKNOW SOR-2020-21,I/P-7.2.8.1/10 3 PCC for BaseProviding and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: 1:2:4 (1 cement: 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size) PWD LUCKNOW SOR-2020-21,I/P-8.4.1.3/12 4 Brick SolingLaying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolling the same with three wheel road roller 80-100 KN as per Technical Specification Clause 412. PWD LUCKNOW SOR-2020-21,I/P-25.20.MORD-412 (4.18)/49 5 FillingSupplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. CPWD SOR-2021 Vol-I ,I/P- 2.27/95 6 Uncoursed Rubble MasonryRandom rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : 7.1.1 Cement mortar 1:6 (1 cement : 6 coarse sand) CPWD SOR-2021 Vol-I ,I/P- 7.1.1/149 7 Steps Brick work with common burnt clay (non modular) bricks of class-150 in foundation and plinth in Cement mortar 1:4 (1 cement: 4 coarse sand) PWD LUCKNOW SOR-2020-21,I/P-9.6.1.1/16 8 Flooring - Wooden38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete. CPWD SOR-2021 Vol-I ,I/P- 11.34/240 9 Bathroom WallsBrick work with common burnt clay (non modular) bricks of class-150 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement 4 coarse sand) PWD LUCKNOW SOR-2020-21,I/P-9.6.4.1/49 10 Bathroom FlooringProviding and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. CPWD SOR-2021 Vol-I ,I/P- 11.37/240 11 Bathroom DadoBrick work with common burnt clay (non modular) bricks of class-150 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement 4 coarse sand) CPWD SOR-2021 Vol-I,I/P-11.37A/241 12 Ceiling FanSupply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. CPWD DSR 2022 E&M (I/P - 19.1/72) 13 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.1.1.3 Group C. CPWD DSR 2022 E&M (I/P - 1.1.3/1) 14 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. CPWD DSR 2022 E&M (I/P - 1.12/3) 15 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1.27.5 8 Module (125mm x 125mm) CPWD DSR 2022 E&M (I/P - 1.27.5/6) 16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 14.15.2 90 mm dia (OD-90 mm & ID-76 mm nominal) CPWD DSR 2022 E&M (I/P - 14.15.2/43) 17 Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. CPWD DSR 2022 E&M (I/P - 1.41/7) Sanitary Installations. 18 W.C. Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :17.3.1 W.C. pan with ISI marked white solid plastic seat and lid CPWD SOR-2021 Vol-II ,I/P- 17.3.1/356 19 Wash BasinProviding and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. CPWD SOR-2021 Vol-II ,I/P- 17.7A/358 20 Bottle TrapProviding and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. CPWD SOR-2021 Vol-II ,I/P- 17.22A/360 21 Towel RingProviding and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. CPWD SOR-2021 Vol-II ,I/P- 17.72/369 22 Bib CockProviding and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 18.50.1 15 mm nominal bore. CPWD SOR-2021 Vol-II ,I/P- 18.50.1/409 23 Stop CockProviding and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms. CPWD SOR-2021 Vol-II ,I/P- 18.63/411 24 Water TapProviding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:17.7.11 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. CPWD SOR-2021 Vol-II ,I/P- 17.7.11/358 25 TENTProviding and Installing of tents OUTER LAYER IS IN PVC 720 GSM IN WATERPROOF, PROOF, UV PROTECTIVE AND ANTIFUNGAL.TOP MIDDLE LAYER IS BLACKOUT.TOP INNER LAYER IS COTTON PRINTED WHICH COTTON IS LINING IN 220 GSM.SIDEWALL OUTER PORTION IS IN CANVAS 450 GSM WHICH IS WATERREPPLENT.MIDDLE LAYER FOR SIDEWALL IS BLACKOUT TO AVOID THE SHADOW (FOR PRIVACY) THIS IS ALSO WATER REPPLENT.INNER LAYER IS IN COTTON PRINTED WHICH IS 220 GSM LINING COTTON.STRUCTURE IS IN M.S WHICH IS FOLDABLE AND PLATE SYSTEM AT THE BOTTOM OF POLES TO FASTEN.WINDOWS WITH WATERPROOF COVER AT OUTDIDE, COTTON CURTAINS AT INSIDE AND MOSQUITO NET IN THE MIDDLE.EXTRA MS PIPES AT THE BOTH THE SIDES WITH COLOUR. DOORS WITH ZIP TO OPEN OR CLOSE FROM BOTH SIDE.ETC. FLAP AT THE BOTTOMQuotation item 26 Land Scape for Parking (Lawn Area) 27 Cast-in-Situ Cement Concrete M 20 Kerb.Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per Clause 408. PWD LUCKNOW SOR-2020-21 MORTH 804(8.1),I/P-26.17/57 28 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) CPWD Horiticulture-2020,I/P-2.13/84 29 Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment). CPWD Horiticulture-2020,I/P-2.2/83 30 Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for payment). CPWD Horiticulture-2020,I/P-2.3/83 31 Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment). CPWD Horiticulture-2020,I/P-2.25/87 32 Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).In rows 5 cm apart in both directions. CPWD Horiticulture-2020,I/P-2.10/83 33 Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) Shrubs Plant. CPWD Horiticulture-2020,I/P-2.57.2/101 34 Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. CPWD Horiticulture-2020,I/P-6.12/155 35 Ficus panda of height 30-45 cm. with 3-4 branches and healthy foliage in polybag of size 20 cm. CPWD Horiticulture-2020,I/P-10369/49 36 Providing and stacking of Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bags of size 25 cm as per direction of the officer-in-charge. CPWD Horiticulture-2020,I/P-8.49/181 37 Providing and stacking of Michelia champa (Golden Champa) of height 90- 105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. CPWD Horiticulture-2020,I/P-7.55/167 38 Interpretation Centre Work 39 Interpretation CenterProviding and installing of Interpretation Center of Wooden base sheesham wood 1/2 inch with 3mm clear A-Cast Acrylic (Reverse UV - Printing with white layer) & SS piller (3x3x42)inch with plate As directed by Engineering incharge includingtools and tackles as per drawing and specifications. 40 Cane Bench 41 Cane Benches:Cane Garden Bench (Product Details Material: Indian Cane And Malaysian Rattan Color: Natural Cane Tone with Clear Touch Wood Finish Dimensions Height: 17 inches Length: 5Feet Width: 16inches)

BRR : 8109696 Tender For Repair / Maintenance Of Joinery In Domestic Area At Af Stn Jaisalmer.; 1 Taking down shutters of any description exc 1.00 but n.exc 2.00 Sqmeach complete all as specified and directed by Engr-in-Charge. 2 Taking down shutters of any description n.exc 1.00 Sqmeach complete all as specified and directed by Engr-in-Charge. 3 Taking down window /ventilator/ door frame with shulters (without taking off shutters from the frames) area not exc 1.5 Sqm each 4 Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc 1.50 Sqm but n. exc. 4 sqm each complete all as specified and directed. 5 M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe290 Gde E-165complete all as specified and directed. 6 S&F 35mm factory made second class hard wood 35 mm thick plain framed, panneled framed panneled shutter ( two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both side facespecification complete all as specified and directed by Engr-in-Charge. 7 S&F 30mm flush door shutters, soild core construction, with block board core and plywood face panels, commercial type both sides with and including 1mm thick plain colour PVC sheet fixed or laid on around the all side surface of flush doors by using rubber based adhesive as per specification complete all as specified and directed by Engr-in-Charge. 8 S&F for second class hardwood glazed and skeleton door shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc , sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 (a) fitted to chowkat complete all as spd andas directed. 9 S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded single side prelam PVC C channel instead of plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single prelam PVC sheet used instead of plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90degree bent edge & as gap insert for top rail & bottom rail;Panelling of single side prelam colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed. 10 S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheetreinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specifiedand directed 11 S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame/shutter work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including roller for sliding window, handle, locking device, necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. 12 S&F4.8mm thick sheet glass, ordinary quality n exc 0.5 sqm in each pane, fixed in doors/windows/Ventillators etc complete all as directed. 13 S&F 4.0 mm thick figured sheet glass as in panes and louvered ,n exc 0.5 sqm in each, fixed in windows/Ventillators etc complete all as directed. 14 S&F Stainless steel (Grade S 304) wire cloth 0.36mm nominal dia of wire and average width of aperture1.4mm and fixed with stainless steel wire staple fixed with aluminium beading etc complete all as specified and as directed. 15 Supply and fixing powder coated aluminium grill for aluminiumwindow and ventilator as per direction of egr in charge 16 S&F aluminium (extruded section body) door closer hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000mm in width. 17 S&F 140 mm size floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor. 18 M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. 19 M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. 20 M&L 20mm thick Granite (of any type) work(table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over and including cement screed bed in CM 1:6laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishingcomplete necessary cutting, notching etc for sink. 21 M&L for Rounding to edges of stone slabs one edge such as in steps,cooking platform, window cill and other similer situations 22 S&F butt hinges medium weight cold rolled mild steel of size 125 mm fixed with stainless screws complete all as specified and directed. 23 S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. 24 S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed. 25 S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. 26 S&F in repairs floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm. complete all as specified and directed. 27 S&F in repair 25mm dia stainless steel curtain rod with fancy type sides cups and brackets all as specified and directed by Engr-in-Charge, sample kept in GE office 28 S&F in repair 25mm dia powder coated curtain rod with fancy type sides cups and brackets all as specified and directed by Engr-in-Charge, sample kept in GE office 29 S&F in repairs Door closer hydraulically regulated aluminium (extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed by Engr-in-Charge. 30 S&F in repair double actionfloor spring hydrolicallyregulatedmade up of minimum 1.25 mm thick aluminum alloy sheet foundation box main body withstainless steel cover governing pivot made of brass , other prts made of mild steel heavey duty and fixed in repairs. complete all as specified and directed. 31 S&F in repair 4 lever vertical size 100mm motice lock for aluminium door as per direction of engr-in -charge. 32 Taking down/Dismantling of false ceiling boards of any description size or thickness including frame work etc complete all as directed. 33 S&F solid PVC fire resistant wall panelling/ Lining consisting of 5mm thick prelaminated PVC sheet inclusive of solvent cement & fixing at site on PVC frame etc complete all as per specifications and as directed.Note:- Rate shall be inclusive of refixing of dismantled E/M fittings and fixtures. 34 S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall with screws to make PVC frame as per specification and drawing. 35 M&L for Anodised aluminium snap grid frame work for false ceiling as specified 36 S&F hangers from RCC soffit/Steel trusses with 6mm dia GI rod (upto 1200mm length) adjusting level fixed to roofby means of ceiling cleats made out of GI flat 40x3mm size 60mm long etc complete all as specified. 37 M&L 7 to 9 mm thick prelaminated design gypsum boardfor fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately). 38 M&L in repair only7 to 9 mm thick prelaminated design gypsum boardfor fixing in 600 mm x 600mm grid.. 39 Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in-Charge. 40 M&L 18/19 mm thickblock boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber & iron frame-work as in cupbords shutters including suitable size of fillets to cover the edge of boards including hinges,fancy type handle, Magnet, and fixing with fastner on wall. complete all as specified and directed. 41 M&L 35 mm thick second class hard wood, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber & iron frame-work as in cupbords frame including suitable size of fillets to cover the edge of boards complete all as specified and directed. 42 S&F figured glass 3.00 mm thick, pin head type and glazing with oil putty in squares/rectangle exc 0.5 Sqm in each pane complete all as specified and as directed and directed by Engr-in-Charge. 43 S&F glass pane ordinary quality 3mm thick not exc 0.50 Sqm each pane with fixingclips, putty or wooden beads and makinggood the surfaces matchingexisting surfaces fixing glass to wooden/ steel window/doors/alu doors etc. 44 Hacking out old broken glass any thicness size quality or description from metal frame incl puching or drilling out old glazing pin/spring clips and providing and fixing new once. 45 S&F in repair towel rail 600 mm long of chromium plated fixed incl screws complete all as specified and directed 46 S&F in repair towel rack 600 mm long of chromium plated fixed incl screws complete all as specified and directed 47 S&F in repair soap dish, any type, fixed to plugs with chromium platedbrass screws complete all as specified and directed. 48 S&F in repair stainless steel fancy type peg set 8. (not less 450 mm length) complete all as specified and directed by Engr-in-Charge. 49 S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick PVC board and fixed to wooden plugs with chromium plated brass screws and cup washers. 50 S&F in repair bevelled edge looking mirror of selected quality glass, mounted on 6mm thick PVC board and fixed to wooden plugs with chromium plated brass screws and cup washers. 51 S&F in repair Bathroom mirror Cabinet (450x350mm)complete all as specified and directed by Engr-in-Charge. 52 S&F in repair Corner glass shelf 300mm 3 story (with ABS Brackets) complete all as specified and directed by Engr-in-Charge. 53 S&F in repair Kitchen rack (Overall size 600x600x300 mm) not less than 7.5 kg wt complete all as specified and directed by Engr-in-Charge. 54 S&Fin repairs GI wire cloth 0.56mm nominal dia of wire and 1.18mm average width ofaperture complete with beads etc. for steel/ wooden door shutter/ window shutter of any size / type / thickness complete all as specified and directed by Engr-in-Charge. 55 S&F Cupboards/wardrobes, factory made, framed shell be of 1.25 mm thick pressed steel PBI sheet of size 90x70mm shutter shall made of 1mm thick pressed steel with 6 Nos of 100mm long hinges standard pattern rim lock with complete locking arrangement including 12mm vertical rod shall be proved (brass mortice lock vertical type, size 65mm, 2 levers, ISI marked with escutcheon plate abd two key and with including two coats of spray painting with synthetic enamel paint of approved over a coat of primer fixing with minimum 6 Nos 12 mm dia mild steel bolts 150 mm long grouted in brick wall/ concrete including(Taking down old Cupboard) making good the disturbed surfaces as original with CM (1:4) or PCC (1:2:4) type B complete all as specified and directed . Note : The measurement shall be taken of front elevation and not girtwise. 56 Supply and fixing in repair 150mm long extruded aluminium handles fabricated type anodized, ISI marked. 57 Same as above but custom type decorated type made of brass as per direction of engr-in-charge. 58 Same as above but custom type decorated type made of SS as per direction of engr-in-charge. 59 M & L in repair 12mm thick plain/froasted toughened glass door including stainless steel door handle 300mm long decorative type incl all necessary connected fittings and fixtures for door all as specified and directed. 60 M&L for PVC Shutter made out of solid PVC form profile 18 mm thick homogeneous fine cellular structure panelled having styles and rails of size 45 mm x 20 mm joints mitred at corners. The panel shall be made of 3 mm thick HPL sheet cover with moulding of size 35 mm 15 mm in any colour both side including stainless steel modular hinges,magnet catchers, handles & Knobs etc. 61 M&L for stainless steel basket of different patternlike plate rack,bottle rack etc,fixed with and including adjustable sliding steel channels to kitchen cabin,pattern and no of steel racks will be specified and directed . Make -Godrej/steel 62 Easing of Allu doors/window/ventilator shutter any thickness, any size and repair by Pvc rubber beeding,including tightening of hinge screw, by adjusting/tightening of tower bolts, sliding bolts etc and making it fully functional complete. 63 Easing of wooden doors/windows/ventilator shutters any thickness, any sizeby planning with plane jack, by tightening of hinge screws, by adjusting/ tightening tower bolts, sliding bolts etc and making it fully functional complete all as specified and directed. 64 Easing of steel windows/ventilator by adjusting projecting type hinges by hammering, oiling/greasing to hinges, adjusting handles of peg stay, including welding Etc, making the window shutter fully functional complete all as specified and directed 65 S&F in repair 6mm thick plain PVC sheeting, as in sheet lining to PVC door fixed with screws/ adhesive/ nails of suitable size complete all as specified and directed 66 S&F in repair 5 mm thick plain, wood ply sheeting, as in sheet lining to wooden door fixed with screws / nails ofsuitable size fixed as in repair complete all as specified and directed. 67 S&F in repair Wooden snap beeding for wooden glazed door with necessary self tapping reinviting / screwing and suitable method as directed including taking down existingcomplete all as specified and directed. 68 S&F in repair V type stainless steelhinge of size 75mm x125mm x 5mm fixed as in repair complete all as specified and as directed . 69 300mm long helical door spring mild steel including roller and roller plate complete all as specified and as directed. 70 Supply and fixing in repair 100mm long butt hinges stainless steel medium weight ISI marked. 71 Supply and fixing in repair 250mm long Stainless steel barrel tower bolt of extrude section ISI marked. 72 S&F in repair 300mm long stainless steel sliding bolts, , with bright bolt not less than 12mm dia all as specified 73 Supply and fixing in repair 50 mm long fancy type handle for cup board as per spd and directed. 74 Supply and fixing in repair pvc fancy type knob for cup board as per spd and directed. 75 Supply and fixing in repair pinao hinge for cup board as per spd and directed. 76 Supply and fixing in repair 3 D hinge(Daddo kabja) for cup board as per spd and directed. 77 M & L in repair 1 mm thick vaneer mica laminated over door, cupboard etcall as specified and directed. 78 Attending petty complaints of carpenter nature such as hinge repair, door repair, window repair, repair/replacement of builder hardware etc all as per directed by Engineer-in-Charge. Note : These store will be issued by department at complaint cell. 79 Attending petty complaints of welding such as welding hinges to iron frame of door and window, welding of wicket gate, welding of holdfast guide rails etc all as per directed by Engineer-in-Charge.

BRR : 11118394 Bids Are Invited For Copper Alloy Taps/Stop Valves (V2) Conforming To Is 8931 (Q3) , Stainless Steel Sinks For Domestic Purposes (V3) As Per Is 13983 (Q2) , Plastic Bib Taps, Pillar Taps, Angle Valves & Stop Valves For Hot & Cold Water Services Conforming To Is 9763 (Q3) , Cp Brass Extension Nipple 15Mm , Bottle Trap Cp Brass 32 Mm For W H B , Towel Ring Cp , Shower Rose With Arm Cp Brass 15 Mm , Health Faucet 1 Mtr Long With Flexible Tube And Wall Hook , Towel Rail Cp 600 Mm , Cp Brass Soap Dish , Cp Toilet Paper Holder , Waste Coupling 32 Mm Cp Brass , Sink Coupling 100Mm , Cp Peg Set Of 06 , S.S Curtain Rod 25Mm Dia 3 Point 50 Mtr Long , Bracket Sider End Doom For Fancy Curtain Rod 25Mm , Bracket For Fancy Curtain Rod 25Mm , Grating Cp Stainles Steel Without Frame 125 Mm , Grating Cp Stainles Steel With Hole 125Mm , Pvc Connection With Ptmt Symet Nuts 15 Mm X 450Mm , Pvc Connection With Ptmt Symet Nuts 15 Mm X 600 Mm , Waste Pipe Plastic 32 Mm X 800 Mm Long , Plastic Seat Cover White Colours For Ewc , Vitreous Wc European Type 1St Quality With S Trap , Wash Hand Basin Vitreous 1St Quality , Pvc Internal Fitting For Llc Pvc 10 Ltr Capcity Single , Kitchen Plate Rack Stainless Steel , Mirror Bevelled Edges 600Mm X 450 Mm X 5 Mm , Glass Sheet Clear 1200Mm X 1200 X 3 Point 8Mm , Glass Sheet Frosted 1200Mm X 1200 X3 Point 8Mm , Glass Corner 4Mm Thick Shelf 12 Inch , Glass Shelf 4Mm Thick Long With Brackets For Fixing , Putty For Window Frames Readymade , Low Level Cistern Pvc With Fitting Complete Single , Low Level Cistern Pvc With Fitting Complete Twin , Cover Spike Type For Pvc Water Storage Tank 500 Ltrs , Float Valve Ball Cock Ptmt 15 Mm Complete , Float Valve Ball Cock Ptmt 20 Mm Complete , Bathroom Cabinet With Mirror Size 350X 450Mm , Door Closer Hydraulic Isi Marked , Long Bend Pvc 32Mm For Llc , M Seal In 90 Gms Pkt , Rawal Plug Size 35X8Mm , White Cement In 1 Kg Pack , Thread For Plumber , Door Seal 1200 Mm Long , Door Seal 900Mm Long , Tubing Gi 15 Mm Med Grade Isi Marked , Tubing Gi 20 Mm Med Grade Isi Marked , Elbow Gi 15 Mm Med Grade Isi Marked , Elbow Gi 20 Mm Med Grade Isi Marked , Socket Gi 15 Mm Suitable For Gi Pipe Isi Marked , Socket Gi 20 Mm Suitable For Gi Pipe Isi Marked , Gi Union 15 Mm Med Gde Suitable For Gi Pipe Isi Marked , Gi Union 20 Mm Med Gde Suitable For Gi Pipe Isi Marked , Tee Equal Gi 15 Mm Suitable For Gi Pipe Isi Marked , Tee Equal Gi 20 Mm Suitable For Gi Pipe Isi Marked , Socket Gi Reducer 15 X 20 Mm Suitable For Gi Pipe Isi Marked , Elbow Reducing Gi 15 X 20 Mm Suitable For Gi Pipe Isi Marked , Nipple Hexa 15 Mm Isi Marked For Med Grade Pipe , Gi Clamp For Gi Pipe , Nipple Gi 15Mm X 75Mm , Nipple Gi 15Mm X 100Mm , Nipple Tank Gi 20Mm , Nipple Tank Gi 15Mm , Nipple Gi 20Mmx 75Mm Isi Marked For Med Grade Pipe , Nipple Gi 20Mm X 100 Made Out Of Med Gde Gi Pipe , Nipple Gi 20Mm X 150 Made Out Of Med Gde Gi Pipe , End Plug Gi 15 Mm , End Plug Gi 20 Mm , Washer For 15Mm Bibtap And Stopcock , 15Mm Spindle For Bibcock , Door Stopper Aluminium Double Leg , Ms Hasp And Stapple 100Mm , Knob , Magnetic Catcher , Wire Mesh 24G 14 Mesh 3 Feet Wide 900Mm Stainless Steel , Ms Hinges 100Mm , Ms Hinges 75Mm , Tower Bolt Aluminium 100 Mm , Tower Bolt Aluminium 150 Mm , Tower Bolt Aluminium 200 Mm , Handle Aluminum D Type 125 Mm , Handle Aluminum D Type 150 Mm , Sliding Door Bolt Aluminium 300 Mm , Tower Bolt Ms 100 Mm , Tower Bolt Ms 150 Mm , Sliding Door Bolt Ms 300Mm , Hydraulic Door Closer , Helical Door Spring Isi Marked , Ss Handle For Kitchen 100Mm , Piano Hinges Ms Chrome Plated , Wpc Chowkhat Single , 35Mm Thick Flush Shutter Of Size Point 90X2 Mtr , 35Mm Thick Skelton Shutter Of Size Point 90X2 Mtr , 35Mm Thick Panelled Shutter Of Size Point 90X2 Mtr , Pvc Door Shutter Of Size Point 60X2 Mtr , Pvc Swr Pipe 75Mm Dia , Pvc Swr Pipe 100Mm Dia , Pvc Swr Bend 110 Mm With Access Door , Pvc Swr Bend 75 Mm With Access Door , Pvc Swr Bend 110 Mm Without Access Door , Pvc Swr Bend 75 Mm Without Access Door , Pvc Swr Tee 110 Mm , Pvc Swr Tee 75 Mm , Pvc Swr Socket 75 Mm , Pvc Swr Socket 110 Mm , Screw Wood Steel 100 Mm Pkt Of 100Nos , Screw Steel 50X8Mm Pkt Of 100Nos , Screw Steel 35X7Mm Pkt Of 100Nos , Screw Steel 30X6Mm Pkt Of 100Nos , Screw Steel 20X5Mm Pkt Of 100Nos , Headless Nails 1 Oblique 2 Inches , Headless Nails 3 Oblique 4 Inches , Headless Nails 1 Inches , Nail 75 Mm , Nail 50 Mm , Nail 25 Mm , Safeda For Plumber 20 Gram Pack , Teflon Tape For Plumber , Nails Tack Cut Blue 15 Mm , Nails Tack Cut Blue 20 Mm , Screw Bermi For Fixing 6 Wire Mesh , Water Storage Tank Pvc 1000 Ltrs Capacity , Water Storage Tank Pvc 500 Ltrs Capacity , Ceiling Rose Comma Surface Bakelite 65Mm X 50Mm Three Terminals , Bell Ding Dong 230 Volts , Modular Switch 6 Amp One Way 1 Module , Modular Switch 16 Amp One Way 1 Module , Modular Fans Regulator 1 Module , Modular Fans Regulator 2 Module , Lamp Holder Pvc Oblique Polycorbonate With Back Plate , Modular Socket Type 2 In 1 Comma 3 By 5 Pins Comma 6 Amps , Modular Socket Type Comma 2 In 1 Comma 3 By 5 Pins Comma 16 Amps , Switch Piano Flush Type 5 Amps Single Pole One Way , Switch Piano Flush Type 15 Amps Single Pole One Way , Socket Outlet Flush Type 2 In 1 Comma 3 Pins Comma 5 Amps , Socket Outlet Flush Type 2 In 1Comma 5 Pins Comma 15 Amps , Modular Bell Push 6 Amps Single Pole One Way , Modular Metal Flush Box 1 To 2 Module , Modular Metal Flush Box 4 Module , Modular Metal Flush Box 6 Module , Modular White Cover Plate With Frame 1 To 2 Module , Modular White Cover Plate With Frame 4 Comma 6 And 8 Module , Inverter Led Batten 20 By 22 Watt With Opal Diffuser Ip 20 Battery Backup , Led Batten Light Fitting 4 Feet Length 220V , Led Batten Light Fitting 2 Feet Length 220V , Led Bulk Had Fitting , Recess Mounting Led Panel Light Fitting 2 Feet X2 Feet , Surface Mounting Led Panel Light Fitting 2 Feet X2 Feet , Mcb Spn 63 Amps , Mcb Sp 6 To 20 Amps , Mcb Tpn 63 Amps 415V Comma 10Kv , Mcb Tpn 40 Amps 415V, 10Kv , Single Pole Enclosure With A Two Pin And Earth Plug , Mccb 4 Pole 3 Phase 415V Comma 125 Amps 25Kv , Mcb Db Spn 4 Way Double Door 200 Amps Neutral 240V , Mcb Db Spn 8 Way Double Door 200 Amps Neutral 240V , Mcb Db Spn 12 Way Double Door 200 Amps Neutral 240V , Vertical Tpn Db Double Door Mccbs Incomer Upto 125 Amps 415V 4 Way , Heating Element 1 Point 5 Kw Triangle Type , Heating Element 1 Point 5 Kw Round Type , Heating Element 2 Point 00 Kw Triangle Type , Thermostat , Pvc Braided Pipe 450Mm Long , Pvc Braided Pipe 600Mm Long , Safety Volve Suitable For 25 Ltr Geyser , Fastner For Any Capacity Geyser , Non Return Volve 15 Mm Dia Horizental Oblique Vertical , Capacitor 2 Point 5 Mfd 240V , Capacitor 3 Point15 Mfd 240V , Ceiling Fans Blade Suitable For 1200 Mm Sweep , Ceiling Fans Blade Suitable For 1400 Mm Sweep , Capacitor 4 Mfd For Exhaust Fan 240V , Capacitor 6 Mfd For Exhaust Fan 240V , Louvers Shutters Made Of Mild Steel Powder Coated For Exhaust Fan Of Size 300 Mm , Louvers Shutters Made Of Mild Steel For Exhaust Fan Of Size 450 Mm , Ceiling Fan 1200 Mm Sweep With Canopy Down Rod Comma Fan Blade , Exhaust Fan Steel Body Ac Single Phase 230V Of Size 300 Mm Sweep , Exhaust Fan Steel Body Ac Single Phase 230V Of Size 450 Mm Sweep , Exhaust Fan Plastic Body Ac Single Phase 230V Of Size 300 Mm Sweep , Led Building Security Light Fitting 35Watt 230V Ac Out Door Type , Self Adhesive Total Quantity : 29415

BRR : 7480036 Annual repair to various Govt Residential Quarter in the campus of PWD Colony at Naraingarh in Ambala Distt. (FY-2025-26) --1 HSR / NS Items 2 [10.1]Providing and laying of base course of floors consisting of 100 mm thickcement1:8:16and100mmsandor stone filling. 3 [10.58]Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 4 [10.63.2]Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. 2. Size of Tile 600x600 mm 5 [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand) 6 [11.58]Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete 7 [12.19.2.1.2]Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 2.1.2. 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required sizeKiln seasoned and chemically treated Hollock wood 8 [12.37.2]Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 2. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 9 [12.88]Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm), with necessary accessories and screws etc. complete. 10 [12.9.7.1]Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : 7.1. Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm). 11 [13.10.1]Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 1. 4.0 mm thick glass panes 12 [13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 13 [22.1.8]Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 8. White vitreous chinaware Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow including operated levers 14 [22.10.1.2]Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 1.2. Kitchen sink with drain board 510x1040 mm bowl depth 225 mm 15 [22.104.1]Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 1. 15 mm nominal bore 16 [22.106.1]Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 1. 15 mm nominal bore 17 [22.107.1]Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 1. 15 mm nominal bore 18 [22.181]Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 19 [22.23.1]Providing and fixing white vitreous chinaware pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 1. W.C. pan with ISI marked white solid plastic seat and lid 20 [30.22]Removing dry or oil bound distemper, water proofing cement paint and the like