BRR : 9016551 Refurbishment And Upgradation Of Entrance Lobby Area Of Training School Hostel Building At Anushaktinagar, Mumbai. - Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 100 M Leadfor Thickness Of Tiles Above 25 Mm And Up To 40 Mm. 2 Dismantling Old Plaster Or Skirting Carefully, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 100M Lead. 3 Dismantling Doors, Windows & Clear Storey Windows ( Steel Or Wood Or Aluminium ) Including Shutters & Chowkhats ( Frames ) , Architraves, Holdfasts Etc. Complete And Stacking Within 100 Mts. Lead. 4 Of Area Below 3 Sq. M 5 Of Area Beyond 3 Sq. M 6 Lead Charges For Lead Exceeding 4 Km Not Exceeding 5 Km, By Mechanical Transport Includinmg Loading, Unloading, Stacking / Levelling Etc. ( Note : The Rates In Respect Of Itemare Applicable For The Net Quantity Arrived At After Making Deductions For Voids At 30% From Thecorresponding Stack / Truck Measurements. ) 7 Providing Wood Work In Frames Of Doors, Windows, Clear Story Openings And Other Frames, Wrought Framed And Fixed In Position Of Required Size And Shape Including Sawing, Jointing, Making Rebates For Shutters, Making Grooves As Shown In The Drawings, Finishing The Surfaces To The Required Finish All As Per Specifications Anddrawings Including Necessary Ms Hold Fasts 40 Mm X 3 Mm Thick, 200 Mm Long / With Coach Screws Including Protective Painting To The Suface That Will Come In Contact With Walls, Joining Materials, Labour Etc. Complete All As Per Specifications And As Directed By The Engineer-In-Charge. Using Second Class Teak Wood Only. 8 Providing And Fixing 35 Mm Thick Flush Door Shutters Conforming To Is : 2202 Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Internal Teak Wood Lipping 25Mm Wide And Fixing With 4 Nos Of 125 Mm Long Stainless Steel Hinges With S.S. Wood Screws Complete. 9 Providing And Fixing Decorative High Pressure 1.5 Mm Thick Laminated Sheet Of Plain / Wood Grain In Gloss / Matt / Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is:2046 Type S Including Cost Of Adhesive, Labour Etc. Complete As Directed 10 Providing And Fixing 12 Mm Bison Board Including Adhesive Material, Screw Etc. As Directed By Engineer-In-Charge. 11 Providing And Applying French Spirit Polishing For Wooden Sufaceswith Twocoats On New Works Including A Coat Of Wood Filler To Form A Uniform Neat Finishas Directed By The Engineer -In-Charge And / Or As Per The Specifications Complete As Directed By The Engieer-In-Charge 12 Providing And Fixing Anodized Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Z Sections And Other Sections Of Approved Make Conforming To Is 733 And Is 1285 Fixed With Rawl Plugs And Screws Or With Fixing Clips Or With Expansion Hold Fastners Including Necessary Filling Up Of Gaps At Junctions, At Top, Bottom And Sides With Required Pvc / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Whereever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Panelling, C.P Brass / Stainless Screws All Complete As Per Drawings And And Directions Of Engineer-In-Charge Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Pvc / Neoprene Gasket Required Filling The Gaps Using Silicon Grout Sealent Etc. ( Fittings Glazing And Panelling Shall Be Paid For Separately ) Note : 1 ) The Rates For Aluminium Is Inclusive Of All Fastners Required For Fabrication And Fixing In The Walls. 2 ) All Joints Shall Be Of Mittered Joints 3 ) A Long M.S Rod Threaded At Both Ends To Be Provided In All Aluminium Door Shutters In Top &Bottom Horizontal Members Internally Connecting Vertical Members And Fixed With M.S Washers & Nuts. 4 ) Only Aluminium Members Alone Shall Be Measured And Paid For. 13 Anodised Aluminium Sections ( Minimum Anodizing Thickness Of 15 Micron ) 14 Polyster Powder Coating On Aluminium Sections 15 Providing And Fixing Glazing In Aluminium Doors, Window, Ventilator Shutters And Partitions Etc With Pvc / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And Directions Of The Engineer-In-Charge ( Cost Of Snap Beading Shall Be Paid In Basic Item ) 16 Withclear Float Glass Panes Of 6.00 Mm Thickness 17 Design, Fabrication, Supply And Installation Of Frameless Façade Using Clear, Toughened Float Glass Of Specified Thickness For Fixed Glazing And Openable Panels ( Doors ) With Crystal Edge Polish ( Dorma Pt Range Or Approved Equivalent ) For Swing Doors, Hunged On Floor Spring, , S.S.Handles And Locking Arrangement And Clear Toughened Float Glass Fixed For Fins And All Joints Sealed With Weather Silicone Sealent And Fixed Portion Glass From Top Sides And Bottom With Anodised ( Minimumthickness 25 Microns ) Aluminium C Channels ( 25 Mm X 25 Mm X 1.5Mm Thick ) And All Glass To Glass Joints Sealed With Clear Thick Weather Silicone Sealent And Making The Required Grooves In Plaster / Concrete For Fixing Channels Etc And Making Good The Same With Sealent / Plaster Of Paris Etc. Complete All As Per Approved Shop Drawings, Specifications And As Directed By Engineer-In-Charge. ( Shop Drawings To Be Prepared By The Contrator As Per The Site Conditions And The Same Shall Begot Approved By Engineer In Charge Before Procurement. ) 18 Frameless Fixed Panels Using 12Mm Thick Clear Toughened Float Glass Including Making Cut Outs, Finishing The Edges Sealents Etc Complete. Glass Area Alone Shall Be Measured And Paid. 19 Providing And Fixing Approved Quality And Shape Star Locks Cum Handle Of Midin Or Approved Equivalent Make For Slidingshutters. 20 Providing And Fixing Approved Quality Stain Less Steel Body Roller Wheelsof Approved Make For Slidingshutters 21 Providing And Fixing Stainless Steel ( Ss 304 Grade ) Adjustable Friction Windows Stays Of Approved Quality With Necessary Stainless Steel Screws To The Side Hung Windows As Per Specifications And As Directed By The Engineer-In-Charge 22 205 X 19 Mm 23 255 X 19 Mm 24 Design, Fabrication, Supply And Installation Of Frameless Openable Panels ( Swing Doors ) Using Clear, Toughened Float Glass Of Specified Thicknessopenable Panels ( Doors ) With Crystal Edge Polish And Necessary Patch Fittings ( Dorma Pt Range Or Approved Equivalent ) For Swing Doors, Hunged On Floor Spring, Having A Length Of 1200 Mm Minimum, S.S.Handles And Locking Arrangement And Clear Toughened Float Glass Fixed For Fins And All Joints Sealed With Weather Silicone Sealent And Fixed Portion Glass From Top Sides And Bottom With Anodised ( Minimum Thickness 25 Microns ) Aluminium C Channels ( 25 Mm X 25 Mm X 1.5Mm Thick ) And All Glass To Glass Joints Sealed With Clear Thick Weather Silicone Sealent And Making The Required Grooves In Plaster / Concrete For Fixing Channels Etc And Making Good The Same With Sealent / Plaster Of Paris Etc. Complete All As Per Approved Shop Drawings, Specifications And Asdirected By Engineer-In-Charge. ( Approximate Size Of The Openings ) . 25 Frameless Openable Panels ( Swing Doors ) Using 12Mm Thick Toughened Float Glass For Door Leaves With The Required DormaS Pt Range Or Approved Equivalent Patch Fittings, Bts-80 Floor Springs, 1200Mm Long Stainless Steel Handles ( Dorma / Kich Make Or Approved Equivalent ) , Corner Lock With Strike Plate And Cylinder. 26 Designing, Providing And Fixing Of 4 Mm Thick Approved Make And Shade Aluminium Composite Metal Panel Of Approved Make Cladding At Different Locations Including Soffits Of Over-Hangs But Excluding Aluminium Frame Work With Grids Filled In With Weather Silicon Sealant As Per The Drawings. The Acm Panel Composition Shall Be Of 0.5 Mm Thick Pvdf Coatedaluminium Sheet + 3 Mm Thick Low Density Polyethelene Virgin Resin Core + 0.5 Mm Thick Polyester ( Pvdf ) Coated Aluminium Sheet All Complete As Per Approved Shop Drawings And Specification ( Aluminium Frame Work Will Be Paid Under Reelevant Item ) Note : Acmp Shall Be Measured To The Actual Visible Area Of The Acp Sheet Including Silicon Joints As Fixed On Site. 27 Providing & Fixing Epdm Herculan Mf-Od10mm Or Approved Equivalent Synthetic Flooring And Matching Shade Complete As Per Patterns, Drawings And Specifications Complete As Directed By Engineer-In-Charge. 28 Providing And Fixing Glazed Vitrified Floor Tiles In Floor And Dado Of Approved Make In Different Sizes Conforming To Is 15622 Inall Colours And Shades In Glossy Or Matt Or Satin Finishlaid Over A Bed Of Minimum20 Mm Thick Bed Of Cement Mortar 1:4 ( Using Crushed Sand ) And Jointing With Grey Cement Slurry Including Grouting With The Joints Withwhite Cement Based Tile Grout Of Approved Make And Matching Shade Complete As Per Patterns, Drawings And Specifications Complete As Directed By The Engineer-In-Charge 29 Using Tiles Of Size 800 X 1600 Mm 30 Provding And Constructing Brick Workin Cement Mortar Using Standardbricks Of Approved Class / Quality, Make Or Brandin Foundation And Plinth Including Curing, Raking Out Joints, Simultaneous Pointing Below Plinth Level If Specified, Complete As Perdrawings, Specifications And As Directed By The Engineer-In-Charge 31 Brick Workin C.M 1:4 Using Crushed Sand. 32 Providing 20 Mm Thick External Plastering In Two Coats Under Layer 12 Mm Thick With C.M 1:4 ( Usingcrushed Sand ) Finished With A Top Layer 8 Mm Thick In C. M 1:3 ( Using Crushed Sand ) Including Approved Water Proofing Compound @ 2% By Weight Of Cement Or As Per ManufacturerS Specifications, Sieving Of Sand To Required Fineness, Scaffolding Up To 10 Metres Height, Finishing, Curing Etc. Complete As Per Specifications. And As Directed By The Engineer-In-Charge 33 Providing 15Mm Thick Plastering Using Ready Mix Internal Plastering Compound Of Approved Make For Internalfaces Of Brickwork / Concrete Surfaces Including Preparation Of The Surface, Curing, Cleaning, Scaffolding Completeall As Per Specifications And As Directed At Site By The Engineer-In-Charge 34 Providing And Laying In Position Cement Concrete Of 1:2:4 ( 1 Cement, 2 Crushed Sand, 4 Graded Stone Aggregate Of Nominal Size 20 Mm ) Including Consolidation, Finishing, Curing Etc. Complete As Per Specification And Drawingsbut Excluding The Cost Of Formworkshuttering, Centering And Steel Reinforcement At All Levels 35 Providing , Centering , Shuttering Form Work Using Pvc Film Faced Plywood To Get A Neat Form Finish Surface For All Types Of Structures Including Necessary Strutting, Proping, Staging, Supports Etc And Deshuttering The Same After The Specified Time All As Per Drawings And Specifications At All Levels ( For Super Structure ) 36 Providing, Supplying And Laying Pre Polished Granite Slab Flooring / Dado / Wall Cladding With Not Less Than 15-17 Mm Thick Graniteslabsover20 Mmthick Base Cement Mortar 1:4 ( Using Crushed Sand ) Laid And Placedwith Grey Cement Slurry Including Filling The Joints With Matching Whitecement Basedtile Groutcomplete All As Per Specifications And Drawings. 37 Usingapproved Black Shade / Lather Finish 38 Usingapproved Shades Other Than Black 39 Extra For Providing Edge Moulding Upto 17 Mm Thick Granite Slab Counters, Vanitis Etc. Including Machine Polishing To Edge To Give High Gloss Finish Et. Complete As Per Design Approved By Engineer-In-Charge. 40 Granite Work 41 Providing 3 Level Polishing Including Mirror Polishing Of Terrazo / Stilan / Kotah Stone Flooring Complete As Directed By The Project Engineer. 42 Providing And Applying Wall Painting Two Coats On New Work With Premium Plastic Emulsion Paint Of Approved Brand To Give An Even Shade, Including A Coat Of Approved Cement Primer, Including Preparation Of The Surfaces, Scaffolding Complete. As Per Specifications And As Directed By The Engineer-In-Charge 43 Providingand Laying Flooring Plaster Of Paris 8Mm Thick Over New Laid Tiles Including Spreading Polythene Paper, Curing, Levelling, Removal And Disposalof Same Before Cleaning Floor, Labour, Tools Etc. Complete Andas Directed By Engineer In Charge. 44 Providing, Supplying And Fixing Velvet Curtains Of M / S Om Pile Pvt Ltd Make Or Equivalent Approved Including Fabric And Accessories Necessary Forfixing Of Curtain As Per Approved Fixing Arrangement. Fabricatingcurtains To Required Design, Pattern, Sizes Etc As Per Approved Design And Approved Fabric 100% Cotton Of Width Around 142Cm ( 56 ) Of Weight 450 Gsm Complete All As Directed By The Engineer In Charge. 45 Providing And Fixingapproved Make Lay In False Ceiling 600 X 600Mm Unperforated Corrosion Resistant Aluminium Magnesium Alloy Metal Panelfixed In 24 Mm T Frame Work Of Module 600 X 600 Mm. Panels Shall Be Manufactured By Hunders Douglas Or Approved Equivalent Of Size575 Mm X 575 Mm Of Approved Colour In 0.70 Mm Thickaluminium Alloy3105 With Square Edges Tiles To Bestove Enamelled On A Continuous Application For Pre-Treatment. The Coils To Be Go Through4 Stages Of Pre-Treatment Three Times Of Oven Baked Through Conversion Coating , Priming And Finish Coat Ensuring Superior Adhesion, High Corrosion Resistance And Good Colour Stability.The Coils To Be Painted On Both Sides After Degreasing. Inside Surface To Have A Primer Of 5 Microns And A Coat Of Natural Colour Of 5 Microns, Exposed Surface To Have A Primer Of 5 Microns, Binder Of 5 Microns And A Topcoat Ofapproved Colour 15 Microns. Grid System For Fixing Ceiling Tiles Shall Comprise Of Tees. The 24 Mm Main Tee Runers Shall Be Suspended At An Interval Of 1200 Mm Centre To Centre. The 24 Mm Cross Tee Runner Shall Be Suspended At An Interval Of 600 Mm Centre To Centre And Further Supported With 24 Mm Cross Tee With Inter Locking Arrangements To Form A Grid Of 600 Mm X 600 Mm. The Main Tee Shall Be Supported By Means Of 4 Mm G.I.Rod From Slab / Roof. The Suspension Shall Be Provided At1200 To 1500 Mm Centre To Centre.Provision Forlights, Diffusers Etc To Be Made Including Extra Supports Wherever Necessary. Measurements Shall Be As Per Actual Area Of False Ceiling With Out Deductions For Lights And Diffusers. 46 Providing And Fixing In Position Suspendedseamless False Ceiling System Using 12.50 Mm Thick Moisture Resistantplain Gypsum Board ( Gyproc.Mr Of M / S .Saint Gobain Make Or Approved Equivalent ) Suspended Ceiling, Which Includes Gypsteel Ultra™ Crp Surface Or Approved Equivalent Ribbed Perimeter Channels ( Having One Flange Of 20Mm And Another Flange Of 30Mm And A Web Of 27Mm ) Along The Perimeter Of Ceiling, Screw Fixed To Brick Wall / Partition With The Help Of Nylon Sleeves And Screws, At 610Mm Centres. Then Suspending Gypsteel Ultra™ Crp Surface Ribbed Intermediate Channels Of Size 45Mm ( With Two Flanges Of 15Mm Each ) From The Soffit At 1220Mm Centres With Gypsteel Ultra™ Crp Surface Ribbed Ceiling Angle Of Width 25Mmx10mm Fixed To Soffit With Gi Cleat And Steel Expansion Fasteners ( Mfg By Ms Saint Gobain Gyproc Or Approved Equivalent ) . Gypsteel Ultra™ Crp Or Approved Equivalent Surface Ribbed Ceiling Section Of Having Web Of 51.5Mm And Two Flanges Of 26Mm Each With Lips Of 10.5Mm Are Then Fixed To The Gypsteel Ultra™ Or Approved Equivalent Intermediate Channel With The Help Of Connecting Clip And In Direction Perpendicular To The Gypsteel Intermediate™ Channel At 457.5Mm Centres.Single Layer Of 12.5Mm Tapered Edge Gyproc® Mr ( Conforming To Bs 1230 Part 1 ) Is Then Screw Fixed To Ceiling Section With 25Mm Drywall Screws At 230Mm Centres.Screw Fixing Is Done Mechanically Either With Screw Driver Or Drilling Machine With Suitable Attachment. Finally Square And Tapered Edges Of The Boards Are To Be Jointed And Finished So As To Have A Flush Look Which Includes Filling And Finishing With Gyproc Jointing Compound, Gyproc Joint Paper Tape And Two Coats Of Drywall Top Coat ( As Per Recommended Practices Of M / S Saint- Gobain Gyproc India Or Approved Equivalent ) 47 Providing Vision Panel Not Exceeding 0.1 Sqm In All Type Of Flush Door Including Fixing 4 Mm Clear Glass With Necessary Teak Wood Beadings Complete All As Per Specifications And As Per Drawings. 48 Supplying Of Unskilled Man Power / Labour For Loading / Unloading, Area Cleaning And Miscworks. Etc. Including Cost Of Equipement Whichever Is Required At Site. 49 Providing And Laying 6 Mm X 6 Mm Square Brass Strip For Inlay In Flooring As Per Approved Pattern, Rate Includes Machine Cut Precise Groove For Fixing Brass Strip And Brass Strip Should Be Fixed In Floor With Required Chemical.The Quoted Rate Shall Also Include All Tools & Tackles, Consumables, Epoxy Etc., Transportation, And Making Area Good After Fixing Bass Strip, All Complete As Directed By Engineer-In-Charge. 50 Providing And Fixing Genesis Tdp 100 Black Tiles Trims8 Mm Width Corner Strips Square Ss For Inlay In Column`S Corneras Per Approved Pattern, Rate Includes Machine Cut Precise Groove For Fixing Strip And Strip Should Be Fixed In Floor With Required Chemical. The Quoted Rate Shall Also Include All Tools & Tackles, Consumables, Epoxy Etc., Transportation, And Making Area Good After Fixing Square Inlay, All Complete As Directed By Engineer-In-Charge. 51 Providing And Applying 2 To 3 Coats Of Melamine Polish Of Best Approved Make And Shade To Wooden / Plywood Surface, Etc., As Per Manufacturers Specifications Including Preparing Surfaces And As Directed By Engineer In Charge Etc. Complete. 52 Providing And Applying French Spirit Polishing For Wooden Surfaceswith Twocoats On New Works Including A Coat Of Wood Filler To Form A Uniform Neat Finishas Directed By The Engineer -In-Charge And / Or As Per The Specifications Complete As Directed By The Engineer-In-Charge 53 Providing And Fixing 3 Mm Thick Veneer, Approved Make And Shade Fixed Over Suitable Base Like Cement Board In Wall Cladding Etc.The Quoted Rate Shall Include All Tools & Tackles, Consumables, Nails & Screws Etc., Transportation, Labours , All Complete As Directed By Engineer-In-Charge. 54 Providing And Fixing12mm Thk Bwp Marine On Existing Partition Frame / Wall / Etc. With Necessary Hardware With 1Mm Laminate / Veneer Of Approved Shade / Colour All Complete As Per ArchitectS Instructions & Detail Drawings And As Directed By Engineer-In-Charge. 55 Providing And Fixing6mm Thk Bwp Marine On Existing Partition Frame / Wall / Etc. With Necessary Hardware With 1Mm Approved Laminate / Veneer Of Approved Shade / Colour All Complete As Per ArchitectS Instructions & Detail Drawings And As Directed By Engineer-In-Charge. 56 Providing And Fixing18mm Thk Bwp Marine Ply On Existing Partition Frame / Wall / Etc. With Necessary Hardware With 1Mm Laminate / Veneer Of Approved Shade / Colour All Complete As Per ArchitectS Instructions & Detail Drawings And As Directed By Engineer-In-Charge. 57 Providing And Fixing 304 Grade Stainless Steel Pipesof Approved Size And Make And Quality By Cutting And Placing In Position Including Embedding If Necessary Complete As Per Specification And As Directed By The Engineer In Charge 58 Providing, Supplying And Fixing Venetian Roller Blindsof Approved Make With All Accessories And Fabricating To Required Sizes Etc. As Per Approved Design And Approved Fabric Complete All As Directed By The Engineer-In-Charge. 59 Fabrication , Supply And Installation / Fixing On Wallof Frp Murals Of Approved Design / Scheme Including Teak Wooden Framework And Appropriate Wooden Backing. The Frp Murals Shall Be Designed In Consultation With Engineer-In-Charge / Architect. Cost Includes Making Of Clay Model And Getting It Preapproved Before Casting, Pu Coating & Melamine Polishing And Shall Be As Per Approved Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 60 Frp Murals Abstract 61 Frp Murals Figurative 62 Fabrication , Supply And Installation / Fixing On Wallof Painting Of Approved Design On Canvas With Approved Wooden Framing Of Required Thickness And Design. Cost Includes Creating Of Unique Painting Based On Clients Ideas / Thoughts And Submitting Draft Painting In Digital Form For Approval And Making Of Final Painting On Canvas And Fixing On Wall With Required Approved Framing And As Directed By The Engineer-In-Charge. 63 Canvas Painting Abstract / Contemporary 64 Canvas Painting Figurative 65 Supplying And Installation At Required Location Premium Quality Illuminating Pebbles Without Inner Made Of Roto Moulded ( Lldpe ) Material Having Built-In Led Soft Light Of Following Sizes Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge. 66 Pebble Size Small - 43 Cm Dia ( L ) And 22 Cm ( W ) Depth And 16Cm ( H ) 67 Pebble Size Medium - 60 Cm Dia ( L ) And 45 Cm ( W ) Depth And 23Cm ( H ) 68 Pebble Size Big - 80 Cm Dia ( L ) And 58 Cm ( W ) Depth And 29Cm ( H ) 69 Supplying And Installation At Required Location Premium Quality Pebbles Of Approved Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge. 70 Pebble Stone, Makrana Stone, Transparent Pebble 71 Supplying And Installation Of Polycarbonate Sheet 5Mm Thick For Frp Tray Including Cost Of Ss Screw And Epoxy, Consumables Etc. 72 Supplying And Installation At Required Location Premium Quality Designer Frp Tray Of Required Sizes Of Approved Make, Colour, Shade, Finish And Shape All As For Pebble Stone And Led Lighting As Directed By The Engineer-In-Charge 73 Fabrication, Supply And Installation / Fixingof Ss Laser Cut Jali2mm Thickin Approved Finish Shade Of Ss304 With Frameas Per Approved Shop Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 74 Fabrication , Supply And Installation / Fixing Of Frp Round Sculpture ( Contemporory ) In Approvedfinish With Pu Coating. Size-450Mm X 900 Mm ( Height ) . The Height Shall Be Taken Proportionately. Drawing / Clay Model Of Sculpture Shall Be Pre-Approved Before Casting And Shall Be As Per Approved Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 75 Fabrication , Supply And Installation / Fixing Of Gi Metal Sculpture ( Four Dimentional ) In Approvedfinish With Pu Coating. Size-600Mm X 1800 Mm ( Height ) . The Height Shall Be Taken Proportionately. Drawing / Clay Model Of Sculpture Shall Be Pre-Approved Before Casting And Shall Be As Per Approved Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 76 Fabrication , Supply And Installation / Fixing Of Frp Welcome Sculpture ( Four Dimentional ) In Approvedfinish With Pu Coating. Size-450Mm X 900 Mm ( Height ) . The Height Shall Be Taken Proportionately. Drawing / Clay Model Of Sculpture Shall Be Pre-Approved Before Casting And Shall Be As Per Approved Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 77 Fabrication, Supply And Installation / Fixingof Ss Lettering In Approved Finish Shade In English Tsh. The Letter Shall Be Of Ss304 Grade, Size 600Mm By 900Mm, 25Mm Thick And Proportionate Width As Per Approved Shop Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 78 Fabrication, Supply And Installation / Fixing On Wallof Ss Lettering In Approved Brass Finish Shade In English Barc, Atoms In The Service Of Nation, Barc Guest House & Trainees Hostel And Hindi??????? ?? ???? ??? ??????, ???? ?????? ????? ??? ??? ????????? ?????????. The Letter Shall Be Of Ss304 Grade, Size Between 50Mm To 150Mm, 1.5Mm Thick ( As Per Exisiting Logo ) And Proportionate Width As Per Approved Shop Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 79 Providing, Applying One Coat Of Acrylic Based Textured Plaster Of Approved Make With The Finish As Directed With Average Thickness Of 2.50 Mm And Finished With 2 Coats Of High Performance Coating Of Approved Shade Including Preparation Of The Surfaces, Complete. As Per Specifications And As Directed By The Engineer-In- Charge. 80 Supplying And Installation At Required Location Premium Quality Illuminating Pots Made Of Roto Moulded ( Lldpe ) Material Having Built-In Led Soft Light Of Following Sizes Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge. 81 Pot Size - 30 Cm Dia And 30 Cm Depth To Fit 10 Pot 82 Pot Size - 40 Cm Dia And 40 Cm Depthto Fit 12 Pot 83 Pot Size - 50 Cm Dia And 50 Cm Depth To Fit 16 Pot 84 Supplying And Installation At Required Location Premium Quality Designer Frp Pots In Sand Stone Finish Of Following Sizes Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge 85 Pot Size - 45 Cmand 45 Cm Depth ( Quebec 45 ) 86 Pot Size - 43 Cmand 72 Cm Depth ( Rib High Medium ) 87 Pot Size - 100Cmand 45 Cm Depth ( Barca Req. ) 88 Pot Size - 40Cmand 78 Cm Depth ( Paris Big ) 89 Supplying And Installation At Required Location Premium Quality Designer Brass Flower Pot Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge. 90 Supplying And Installation At Required Location Premium Quality Designer Brass Flower Pot Delicate Slim Design Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge. 91 Supplying And Installation At Required Location 2.7 To 3.0 M Dia. Approx. Pvc Coated Fabric With Special Pvdf Coating Roofing Material Umbrella With Side Steel Stand Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge 92 Providing And Fixing Glass Mosaic Tiles ( Size Approx. 20Mm X 20 Mm X 04 Mm Thick And / Or As Per Site Requirement On The Curved Surfaces ) In Particular Pattern ( Barc Logo ) Including Digital Uv Printing On Glass Mosaic. All Glass Mosaic Tiles Shall Be Mounted On Silicon Mesh And Fixed With Laticrate Sp 100 Fixing Fixing Adhesive & Mapei Transparent Epoxy Grout As Required As Per Specificatins And Manufacturers Recommendations. The Rate Shall Include Cost Of Preparing The Surfaces, Filling The Depressions / Undulations With Epoxy Material Suitably, Cost Of All Labours, Transportation, Taxes, Epoxy Adhesive For Fixing Glass Moasic Tiles Etc. Complete And As Directed By Engineer-In-Charge.

BRR : 9250947 Creation Of Manned Submersible Experience Centre At National Institute Of Ocean Technology, Niot Campus, Pallikaranai, Chennai , Pre Construction Works Dismantling Of All Paver Blocks Including Stacking Of Serviceable Material As Directed By The Engineer In Charge,And Disposal Of Unserviceable Materialsoutside Site Premises , Earthwork Excavation By Mechanical Means Using Jcb, Poclain,Etc., For Foundations, Footing, Rafts, Plinths, Pools, Under Ground Structures, Etc. In All Types Of Soil Including Dense, Wet Or Dry (Such As Yellow, Murrum, Hard Murrum/Gravel Or Mixture Of Any Kind), In Loose And Slushy Condition, Including Leveling, All Leads And Lifts, Rate To Include Stacking Within The Site Adjacent Plot Wherever Specified And Spreading In Layers To The Required Levels And Disposing The Excess Earth By Carting Away Out Side The Site To The Designated Areas Identified By The Local Authorities. Rate Is Inclusive Of Making Temporary Stepping/ Sloping, Shoring With Planking, Strutting, Sectioning, Trimming, Dressing Of Sides, Leveling Or Grading, Cleaning, Removing And Excavating Loose Pockets And Consolidating Them By Backfilling As Directed, Dewatering Of Surface Water Including Rain Water, Removal Of Slurry Generated While Excavation And Keeping The Area Free Of Water, Excavating Loose Pockets And Compacting The Same. Note: Authorised Working Space If Required Shall Be Considered As Per Is 1200. (Provision Of Slopes If Required For Execution).Excavation Upto 1.50M , Back Filling Available Excavated Earth To Excavated Areas In Layers Of 150Mm With Watering And Compaction. Rate Is Inclusive Of Making Temporary Stepping/ Sloping, Shoring With Planking, Strutting, Dressing Up Embankments: If Required, Bailing/ Pumping Out Of Water To Keep Site Dry While Back Filling; Costs Includes Conveyance Of All Materials, Labour, Machinery Etc. Complete Directed. Note: Authorised Working Space If Required Shall Be Considered As Per Is 1200. , Filling And Banking Approved With Good Quality Earth In Plinths, Basement, Areas Development Etc. Other Than The Back Filling Of Excavated Areas In Layers Not Exceeding 200Mm In Depth, Breaking Clods, Watering, Rolling Each Layer With Vibratory Compactor And At Inaccessible Places With Wooden/ Steel Rammers To Achieve 90 To 95% Proctor Density At Optimum Moisture Content; Dressing Up Embankments; If Required, Bailing/ Pumping Out Of Water To Keep Site Dry While Back Filling; Costs Includes Conveyance Of All Materials, Labour, Machinery Etc. Complete. Proctor Compaction Test To Done After Filling. , Supplying, Filling, Levelling, Watering And Consolidating With Approved Good Quality M-Sand In Layers Of Thickness 150Mm In Foundation & Flooring Of Any Depth Sides Of Foundation Etc., Including Loading, Transporting, Unloading , All Leads And Lifts, Labour, Ramming With Iron Or Wooden Rammers, The Surface Shall Be Flooded With Water For Minimum 24 Hours And Etc., All Complete As Directed. , Anti-Termite Treatment - Providingand Injecting Chemical Emulsion Chlorophyriphos 20 % Emulsifiable With Concentrates 1 % @ 5 Ltr. /Sqmof The Surface Or As Directed By Project Manager,For Pre-Constructional Anti -Termite Treatment And Creating A Continuous Chemical Barrier Under And Around The Column Pits, Wall Trenches, Basements Excavation, Top Surface Of Plinth Filling, Junction Of Wall And Floor Along The External Perimeter Of The Of The Building, Expansion Joints Over The Top Surface Of Consolidated Earth On Which Apron Is To Be Laid, Surroundings Of Pipes And Conduits Etc. Complete As Per Specifications. (Plinth Area Of Building At Ground Floor Only Shall Be Measured For Payment) , Piling Works Boringinallkindsofsoils(Asmetatsite)Gravelshingleetc. Includingwaterbearingstrata,Disposalofearthetc.Takenout Fromboresoutsidethesiteorasdirectedbysiteincharge, Excludingthecostofsteel Reinforcement Butincludingthecostofbentonitesolutionfor Bore Stabilisation Etc. By Using Pumps ( Capacity Minimum35 - 40 Hp) Prior To Placing Concrete, Disposal Of Bentnite Solution Etc As Directed All Complete (Length Of The Pile Shall Be Considered For Payment).Therateshallincludecostofalignmentoftwonos.Ofbarof Required Diameter Which Is To Be Used To Hold The Reinforcement Cage Vertical During Concreting, Making Slurry Vats At Pre Approvedlocationofsite,Usingbentonite,Removal&Shiftingof Bentonite Slurry, Solid, Semisolid Liquid Muck From Vat/Drain, Dry/Wet Soil Mixed With Bentonite And The Surplus Earth Excavated Fromvattooutsideofthesitepremisesbytanker&Other Transport. Piles Shall Be Cast As Per The Schedule Of Cut Off - Level Given In The Execution Drawing.Pile Driving 450 Mm Dia, 18 M Long. , Providing Andinstallingcastinsitureinforcedcementconcrete Pile Of Specified Dia Meter And Length Below The Pile Cap,In M-35 Cement Concrete - Ready Mixed Concrete, Design Mix With Minimumcement400kg/Cum(Useofflyashprohibited) Including Admixture As Approved By Engineer-In-Charge To Carry A Safeworkingloadnotlessthan40t. , R.Cc/P.C.C Works Providing And Laying Required Thickness Of Controlled Plain Cement Concrete Of Pcc 1:4:8 Grade Using Over 20Mm And Down Size Coarse Graded Hard Stone Aggregate For Levelling Course In Pile Cap And Flooring At Any Mass Concrete And Other Similar Works At All Levels And Heights, Elevations, Mechanical Mixing, Transporting And Placing At All Lifts, Ramming With Iron Rammer, Compacting, Levelling, Curing For 7 Days, Shuttering, Dewatering Wherever Necessary, The Cost Of All Materials, Labour, Leads And Lifts, Tools And Plant, Machineries Etc., Complete As Per Specification. (100Mm Thick) (I) Pcc 1:4:8 , (Ii) Pcc 1:2:4 , Providing And Laying Cast-In-Situ Controlled Reinforced Cement Concrete Of The Following Grades Using 20Mm And Down Size Coarse Graded Machine Crushed Hard Stone Aggregate Including Designing The Mix, Weigh Batching, Mechanical Mixing, Transporting And Placing At All Lifts, Vibrating, Consolidating, Curing And Finishing Smooth As Required All Exposed Faces, Complete For The Following Rc Structural And Other Elements Including Formwork Either Straight, Curved, Plain, Tapered Or Sloped, Supplying And Mixing Admixtures, Dewatering Wherever Necessary, The Cost Of All Complete Materials Labour, All Leads And Lifts, Tools, Plant And Machineries, Hire And Fuel Charges And All Other Incidential Charges Etc., All As Per Specifications, Drawings And As Directed, But Excluding Steel Reinforcement, Irc Mesh, Insert Plates Which Will Be Paid For Separately Under Relevant Items. The Rates Quoted Shall Hold Good For All Foundations At Any Depth, Flooring, All Floors, Heights, Levels, Elevation, Below Ground Level, Basement, Trenches, Pits And Etc Complete. Grade: M35. (I) Pile Cap 750Mm Thk , (Ii) Plinth Beams 230 X 450 , (Iii) Grade Slab 175Mm Thk , (Iv) Floor Deck Slab - 75Mm Thk , (V) Pedestal , Providing And Supplying Of Reinforcement Inclusive Oflabour Charges For Cutting, Straitening, Fabricating And Fixing In Position Ms Bars Conforming To Is-432 / High Yield Strength Deformed Bars (Tor Steel) Conforming To Is-1786 Of Fe 415 Grade / For Pro Steel Confirming To Is-1786 Of Fe550 Of All Dia For Reinforcement In All Rcc In Situ Works Including Flooring And Precast Works At All Levels And Heights Above Finished Floor Level For Plinth Beam, Columns, Roof Beam, Roof Slab, Lintel, Sunshade, Loft, Drops, Sill Level Slab And Etc., And For Foundations, Trenches, Pits, Lift Pits Etc., Below Finished Floor Level Including Cost Of Straightening, Cutting, Bending To Shape Fabricating And Tying With 18 Guage Gi Binding Wire, Providing And Fixing Cement Cover Blocks, Dewatering Wherever Necessary Etc., All Complete As Per Drawings And Specifications And As Directed By The Engineer. The Rate To Include Cost Of Steel,Binding Wire, Cement Cover Blocks, All Cuts And Wastes Which Will Not Be Measured. Only Laid Weight Will Be Measured Including Authorised Laps. Cuts And Wastes Will Not Be Measured For Payment. Reinforcement , Approved Plywood Or Steel Plate Shuttering & Centering For Structural Concrete Work In Locations Called For Including Strutting, Propping, Bracing, Bolting, Wedging, Casing, Striking, Removal, Etc. Complete For Any Size, Section, Or Thickness. Props Shall Consist Of Well-Designed Steel Pipes Adequately Braced( Wooden Ballis As Props Shall Not Be Permitted). The Item To Include Centering & Shuttering At All Heights And Levels. Allow For Forming Grooves, Drip Courses, Chamfers, Cut-Outs, Openings, Etc. Were Called For And For Dressing With Approved Shuttering Oil To Prevent Adhesion. Unexposed Concrete Surfaces, Subsequently Left Untreated (In The Condition Obtained On The Removal Of Formwork) Shall Not Constitute Exposed Concrete Work And Shall Be Measured Under This Item Only. Irregular Shapes With Sides That May Not Be Perpendicular To Each Other Or Shapes Not Confirming Rectangular Or Square Shall Not Be Paid Separately. (Quoted Rate To Include All Staging Up To Any Height) (I) Pile Cap 750Mm Thk , (Ii) Plinth Beams 230 X 450 , (Iii) Grade Slab 175Mm Thk , (Iv) Floor Deck Slab - 75Mm Thk , (V) Pedestal , R.C.C/P.C.C Works Providing And Layingbrick Work Using Bricks Of Class Designation75in Foundations And Upto Plinthlevel In Cementmortar1:6( 1 Cement :6 Coarse Sand ) Including,Joints Finished Flush/Raked To 12 Mm Depth, Etc. Complete As Directed By The Engineer In Charge, (Cleaning Andsoaking The Bricks At Leastfor 24 Hours Before Use , Curing Etc. All Complete At All Heights / Depth). Rate To Include Plastering, Waterpoofing As Per Architect. , Fabrication Works Providing, Fabricating,Transporting, Assembling & Erection In Position Of Steel Members For Steel Columns,Built Up Beams Using Structural Tubular Sections (Round, Square Or Rectangular Hollow Tubes Etc. Confirming To Is 4923 / Is 1161, Yield Strength 310 Mpa As Per Latest Is Code) To The Required Profile & Shape As Called For As Per The Drawing & Specifications. This Item Also Includes The Shear Connectors /Studs & Fusion Weld To Top Of Horizontal Member. This Item Also Includes Preparation Of Shop Drawings & Their Approval, Necessary Templates, Adequate Temporary Supports, Scaffolding & Staging, All Cutting, Grinding, Sliding & All Labour, Tools, Plants& Equipments & Operations Etc. Required To Complete The Job As Per Drawing & Specification. Every Precaution To Be Taken To Prevent Rusting Of Sections. This Item Also Includes All Test On Materials & Welded Fabricated Parts As Per Specification & Direction Of Engineer - In - Charge. Temporary Bolts & Nuts (Grade En 8) To Be Used During Assembling & Shall Be Removed Before Site Erection. All Site Erection Bolts Shall Be Hsfg Type Only. The Item To Include Cost Of Sand Blasting On Materials, Application Of Primer & Various Coats Of Internal & External Painting In Fabrication Shop &Final Painting On Site Including All Touch Up Works After Erection As Per Technical Specification. (I)The Scope Of Work For This Item Includes : A) Design & Fabrication Of Any Additional Temporary Structure Including All Type Of Lifting Brackets, Supporting Brackets, Which Will Be Required For Transportation & Erection In Position / Launching Of Fabrication Part Or Completeelement In Position.B) Making Provision & Arrangement For Required Opening / Inserts For Fixing Lights Fixtures & Funning Cable Conduits . C) All Incidentals .Labour, Equipment & Plants Required To Execute & Complete The Job From Fabrication To Erection At Final Position As Per Drawing, Specification & Direction Of Engineer - In -Charge. D) Cleaning & Removing Of All Spoil, Temporary Arrangement For Casting Of Deck Slab.E) All Safety Measures Required To Execute & Complete The Work.F) Procurement Of All Materials From Approved Manufactures & Fabrication. Complete Methodology For Structural Steel Work . Name Of Workshop For Fabrication Works. Testing Facilities & Erection Procedures Etc.To Be Intimated For Approval Of Engineer - In - Charge. G) The Provision Of Temporary Bearing / Sand Jacks For Supporting Steel Members During Erection. H) Provision Of Stability Duringerection Against Wind Load Or Any Other Type Of Loading On Structural Steel Members During Erection. , (Ii) Measurement Shall Be Only For Structural Steel Which Is Erected & Is Part Of Permanent Structure & Paid As Per Approved Shop Drawings. All Wastages,Temporary Works,Jigs, Temporary Assembly Bolts Etc. Are Deemed To Be Included In Quoted Rates . No Allowance Or Increase In Weight For Welding,Nuts & Bolts Etc Will Be Applicable. , Providing And Fixing Bare Galvalume Sheets Of 0.475 Mm Thk With Self Drilling Screws, Ridge Cap And Rainwater Downtake Pipes Including Fixing Skylight Panels With Butyle Sealant Beads. Brand: Jsw. , Flooring & Cladding False Flooring: The System Should Be Of Nominal 600Mm X 600Mm (35Mm Thick) Modular Panels With Heavy-Duty Pedestals. The Total System Weight Shall Not Exceed 40 Kg/Sq.M. The System Shall Be Able To Withstand A Udl Of 2000 Kg/M2 (1117Kg/Sq.Mt) And A Point Load Of 450 Kg/In2 .Panels Shall Be Made Of Steel With An Infill Of Lightweight, Non-Combustible Having Fireresistance, Thermal Insulation, And Flame Resistance Properties At 60 Min Cementitious Material.The Bottom Of The Panel Shall Be Embossed In Hemispherical Shape To Give Strength And Flexural Rigidity.The Infill Material Shall Not Become Loose When The Panels Are Cut. Panel Should Be Able Towithstand An Ultimate Load Of At Least 2.5 (3.00) Times The Designed Point Load.The Entire Panel Shall Be Coated With Epoxy Powder Coating Of 75-100 Microns On The Exposed Surface.The Panel Top & Bottom Sheet Shall Be 0.9/0.7Mm (0.7/0.6Mm) Resp. Flatness Should Be 0.2Mm.The Panels Shall Have A Top Covering Of Anti-Static High Pressure Laminate With Resistance Of 2X105 –5X108 Ohms. The Hpl Thickness Shall Not Be Less Than 1.5Mm.(1.6Mm).Pedestal Base Shall Be Square Of 100Mm X 100Mm X 2Mm Bearing Area And Assemble To A Tube Of 22Mm Dia With 2Mm Wall Thickness. The Pedestal Head Should Not Be Less Than 3Mm Thick.The Pedestals Should Be Able To Accept An Axial Load Of 22,500N And An Ultimate Load Not Lessthan 45,000N. Pedestal Head Shall Be Galvanized Die-Cut Steel Welded To A Counter Locking Leveling Nut.The Pedestal Head Shall Be Provided With Pvc Cap For Acoustic Dampening. Height Of Pedestal Shall Be Approximate 300 Mm For Floor /150Mm For Steps. , Providing And Fixing Aluminium Composite Panel Of Eurobond/Aludecor Make, Cladding In Combination Of Metallic / Solid Colours, Including All Necessary Frames Work And All Complete. Panel Should Consist Core Of Anti-Toxic Low Density Polyethylene (Ldpe) 3.5Mm Sandwiched Between 2 Skins Of Thick Aluminium Coil Of 0.25Mm. The System Shall Be Installedusing50mm X 50Mm X 50Mm Long 3Mm Thickness G.I L Brackets / 75Mmx50mmx50mm Long 3Mmthicknessg.I.L Brackets @ Min 1.5 Metre Interval Vertically Fastened By 8Mm Dia X 75Mm Long Double Ring/Single Ring Wedge Anchors And 6Mm X 60Mmlong Rawal P/T Type Anchor Fastener Of Uip Brand(Germany Make). 38Mm X 38Mm Thick And 38Mm X25mm L-Angle And 50Mm X 25Mm Box Section Will Be Used For Mullions And Transom With Necessary Accessories, Such As Screws, Rivets, Bolts, Nuts And Washers Shall Be In Zinc Coated/Galvanized Steel.The Bracket Support Shall Be Designed As Per Manufacturers Specification. Sealing Shall Be Done, Using Weather Sealant Of Dowsil Or Equivalent. , Providing And Fixing Corrugated Sheet Cladding In Exterior Elevation In Area / Color As Specified By The Architect To Be Done With Required Channels As Per Manufacterers Specifications. , Providing Andfixing Of 12Mm Thick Bison Board False Ceiling: Metal Framed Suspended Ceiling (Seamless Finish) - Single Layer.False Ceiling Erection To Be With Required Perimeter Channels, Intemediates & Cross Channels As Per Manufacterers Specifications. 6 X 4 Bison Board Fixed With 25Mm Long Self Drilling Screwws With Philips Head. Surface To Be Finished With Jointing Compound And Fibre Taped , Ready To Take Paint Finish.Fixing Channel Size: , Providing Andfixing Of 12Mm Thick Bison Board Partition Walls: To Be Done With Required Channels As Per Manufacterers Specifications On Both Sides Of The Walls/ Partitions. Fixing Channel Size: 65 X 30 Mm / As Per Vendor. , Providing Andfixing Of 9Mm Thick Laminate Cladding On Interior Walls: To Be Done With Required Channels As Per Manufacterers Specifications On Both Sides Of The Walls/ Partitions. 1350 X 295 Panel , Brand : Vox , Providing Andfixing Of Parametric Mdf Panel With Laminate Finish-Fire Rated To Be Done With Required Channels As Per Manufacterers Specifications On Specified Walls/ Partitions, Panel Size 8 X 4 , Base Board 25Mm= 1 Sheet & Parametric Panel 11Mm (Vertical)= 45 Strip, Brand: Glopanel, Fixing Channel Size: 65 X 30 Mm / As Per Vendor. , Providing And Laying Groundcover - Pebbles - Size 50-75Mm Below Staircase. , Providing And Laying Carpet Flooring Over False Flooring, Color And Pattern As Specified By The Architect. , Providing Andfixing Of Vinyl Printed Display Boards On Interior Walls: To Be Done With Required Channels As Per Manufacterers Specifications On Both Sides Of The Walls/ Partitions. , Providing And Laying Machine Cut, Leather Polished Granite Slab Flooring Of Approved Sample, 18Mm Thick And Size As Per Drawings, In Approved Pattern, As Per The Drawings Provided By The Architect, By Applying Mortar To The Substrate With The Flat Side Of The Trowel, Pressing Firmly To Work It Into The Surface; Combing On Additional Mortar With The Notched Side Ue The Proper Sized Notched Trowel For The Stone To Ensure Full Bedding Of The Stone On Checkered Plate Etc. Complete. , Door / Window / Glass Work Providing And Fixing Steel Door Of Size As Mentioned Below With Tata Pravesh Brand -Constructed From 0.0008M Swg Gi Sheet. 0.046M Thk, Frame Of 0.1 X 0.058 Galvanized Iron Profile Dimension, Powder Coated, Ss Ball Bearing Butt Hinges, Mortise Sash Lock With Handles,Mortise Dead Bolt,Latch, Panic Device Provided. -Main Door / Server Room Door , Fire Rated Door Providing And Fixing Steel Door Of Size As Mentioned Below With Tata Pravesh Brand -Constructed From 0.0012M Swg Gi Sheet. 0.046M Thk, Frame Of 0.1 X 0.058 Galvanized Iron Profile Dimension, Powder Coated, Ss Ball Bearing Butt Hinges, Mortise Sash Lock With Handles,Mortise Dead Bolt,Latch, Panic Device Provided. -Service Door , Providing And Fixing Of Toughened Glass Floor Over The Digital Diaply Flooring Using Ms Structure (80Mm X 80Mm X 4Mm Thick As Outer Section And 80Mm X 40Mm X 4Mm Thick As Inner Section) And Glass (8Mm St 167 Toughened Glass + 1.52Mm Clear Pvb + 8Mm St 167 Toughened Glass) Using Spacer Tape With All Other Necessary Accessories. And Need To Arrest 8Mm Fiber Cement Panel With Painting. The Cost Including Of Glass Loading, Fixing And Transport Charges. , Providing And Fixing Anodized/Powder Coated Aluminum Worksliding Doors With Extruded Built Up Standard Tubular And Other Sections Of Approved Made Confirming To Is 733 And Is 1285, Anodic Or Transparent Or Dyed To Required Shade According To Is:1868 (Minimum Anodic Coating Of Grade Ac 15), Fixed With Rawl Plugs And Screws, Or With Fixing Clips, Or With Expansion Hold Fasteners Including Necessary Filling Up The Gaps At Junctions, Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitered And Jointed Mechanically, Wherever Required Including Cleat Angle, All Necessary Hardware Fittings All Complete As Per Architectural Drawings And As Directed The Glass Should Be 5/6Mm Thick Toughened Glass Of Modi/ Saint Gobain Or Equivalent.Ss Mosquito Mesh Mesh Gap: 1.3Mm Opening Aperture, Wire Dia: 30 Swg Material As Per Ss: 2245 Material Grade: Aisi 304. The Cost Includes All Material Machinery Andlabour Including Scaffolding And Any Other Preparatory Work To Install And Complete And Clean As Directed By Engineer In Charge , Miscellaneous Providing And Fixing Of Glass Canopy Using Ms Structure (80Mm X 80Mm X 4Mm Thick As Outer Section And 80Mm X 40Mm X 4Mm Thick As Inner Section) And Glass (8Mm St 167 Toughened Glass + 1.52Mm Clear Pvb + 8Mm St 167 Toughened Glass) Using Spacer Tape With All Other Necessary Accessories. And Need To Arrest 8Mm Fiber Cement Panel With Painting. The Cost Including Of Glass Loading, Fixing And Transport Charges. - Over Main & Service Doors , Monkey Ladder Height: 3.5M / Width: 0.6M , Invisible Grill: 3Mm Dia : @250Mm C/C- Staircase And Parapet , Sub Head B - Electrical Works Part-A Wiring Supply, Installation, Testing And Commissioning Of Surface/Concealed Type Of Point Wiring With Modular Type Switches, Sockets And All Materials As Per The Point Wiring Chart. The Item Including Cost Of Supply And Installation Of 25Mm Pvc Conduits, Couplers, Junction Boxes, Bends, Ceiling/Wall Plates, Metal Boxes, Switches, Sockets, Draw Boxes & Top Cover Plate (3Mm Hylam Sheet), 3 Run Of 1.5Sq.Mm Frls Copper Wires, Bakelite Connectors, Crimping Type Ferrules, Copper Lugs, Brass Cup Washers & Brass Screws, Clamps & Screws And Bolt & Nuts Etc. All The Points Shall Be Terminated With 300Mm Length Of Additional Wires Along With Connector Terminal Blocks. The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. (I) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 4M) , (Ii) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 6M) , (Iii) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 9M) , (Iv) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 12M) , (V) Six Light Points Controlled By One No. Mcb (Upto 12M) , (Vi) Seven Light Points Controlled By One No. Mcb (Upto 12M) , (Vii) One Light / Exhaust Fan / Wall Mounting Point Controlled By Two Nos. 2-Way 6 Amps Switch. (Upto 12M) , (Viii) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 3M Length) , (Ix) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 4M Length) , (X) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 6M Length) , (Xi) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 9M Length) , (Xii) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 12M Length) , Supply, Installation, Testing And Commissioning Of Surface/Concealed Type Of Point Wiring With Modular Type Switches, Sockets And All Materials As Per The Point Wiring Chart. The Item Including Cost Of Supply And Installation Ofmetal Boxes, Switches, Sockets, Draw Boxes & Top Cover Plate (3Mm Hylam Sheet), 3 Run Of 1.5Sq.Mm Frls Copper Wires, Bakelite Connectors, Crimping Type Ferrules, Copper Lugs, Brass Cup Washers & Brass Screws, Clamps & Screws And Bolt & Nuts Etc. All The Points Shall Be Terminated With 300Mm Length Of Additional Wires Along With Connector Terminal Blocks. The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. (The Item Excluding Cost Of 19Mm/25Mm Dia Pvci.E, Point Wiring In The Existing Conduits) (I) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 4M) , (Ii) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 6M) , (Iii) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 9M) , (Iv) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 12M) , (V) Six Light Points Controlled By One No. Mcb (Upto 12M) , (Vi) Seven Light Points Controlled By One No. Mcb (Upto 12M) , (Vii) One Light / Exhaust Fan / Wall Mounting Point Controlled By Two Nos. 2-Way 6 Amps Switch. (Upto 12M) , (Viii) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 3M Length) , (Ix) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 4M Length) , (X) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 6M Length) , (Xi) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 9M Length) , (Xii) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 12M Length) , Supply, Installation, Testing And Commissioning Of Surface/Concealed Type Of Point Wiring With Modular Type Switches, Sockets And All Materials As Per The Point Wiring Chart. The Item Including Cost Of Supply And Installation Of 25Mm Frls Conduits, Couplers, Junction Boxes, Bends, Ceiling/Wall Plates, Metal Boxes, Switches, Sockets, Draw Boxes & Top Cover Plate (3Mm Hylam Sheet), 3 Run Of 1.5Sq.Mm Frls Copper Wires, Bakelite Connectors, Crimping Type Ferrules, Copper Lugs, Brass Cup Washers & Brass Screws, Clamps & Screws And Bolt & Nuts Etc. All The Points Shall Be Terminated With 300Mm Length Of Additional Wires Along With Connector Terminal Blocks. The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. (I) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 4M) , (Ii) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 6M) , (Iii) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 9M) , (Iv) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 12M) , (V) Six Light Points Controlled By One No. Mcb (Upto 12M) , (Vi) Seven Light Points Controlled By One No. Mcb (Upto 12M) , (Vii) One Light / Exhaust Fan / Wall Mounting Point Controlled By Two Nos. 2-Way 6 Amps Switch. (Upto 12M) , (Viii) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 3M Length) , (Ix) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 4M Length) , (X) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 6M Length) , (Xi) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 9M Length) , Supply, Installation, Testing And Commissioning Of Surface/Concealed Type Of Point Wiring With Modular Type Switches, Sockets And All Materials As Per The Point Wiring Chart. The Item Including Cost Of Supply And Installation Of 25Mm Ms Conduits, Couplers, Junction Boxes, Bends, Ceiling/Wall Plates, Metal Boxes, Switches, Sockets, Draw Boxes & Top Cover Plate (3Mm Hylam Sheet), 3 Run Of 1.5Sq.Mm Frls Copper Wires, Bakelite Connectors, Crimping Type Ferrules, Copper Lugs, Brass Cup Washers & Brass Screws, Clamps & Screws And Bolt & Nuts Etc. All The Points Shall Be Terminated With 300Mm Length Of Additional Wires Along With Connector Terminal Blocks. The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. (I) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 4M) , (Ii) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 6M) , (Iii) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 9M) , (Iv) One Light / Exhaust Fan / Wall Mounting Fan Point Controlled By One No. 1-Way 6 Amps Switch. (Upto 12M) , (V) Six Light Points Controlled By One No. Mcb (Upto 12M) , (Vi) Seven Light Points Controlled By One No. Mcb (Upto 12M) , (Vii) One Light / Exhaust Fan / Wall Mounting Point Controlled By Two Nos. 2-Way 6 Amps Switch. (Upto 12M) , (Viii) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 3M Length) , (Ix) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 4M Length) , (X) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 6M Length) , (Xi) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 9M Length) , (Xii) One Additional Light Point Extended From The Existing Light Point And Controlled By Existing Switch. (All Items Are As Similar To {A1.A} But Excluding Of Switch Boxes, Switches And Sockets) (Upto 12M Length) , Power Receptacles Supply, Installation, Testing And Commissioning Of Power Points By Providing Following Switches/Sockets, Mounted Flush To The Walls Usingms Boxes, Inner Plates, Front Plate, Modular Switches And Sockets With All Wiring Accessories. (I) One 6A Dependent 5-Pin Socket Point Controlled By One No Of 6A Switch. (Switch & Socket Are Mounted In A Dependent Switch Box) , (Ii) One 6A Independent 5-Pin Socket Point Controlled By One No Of 6A Switch. (Switch & Socket Are Mounted In An Independent Switch Box White Colour) , (Iii) One 6A Independent 5-Pin Socket Point Controlled By One No Of 6A Switch. (Switch & Socket Are Mounted In An Independent Switch Box Black Colour) , (Iv) One 6A One Way Independent 5-Pin Socket With Terminations , (V) One 6A One Way Dependent/Independent Switch With Terminations , (Vi) One 6A/16A 5-Pin Socket Point Controlled By One 16A Switch With Indicator. (Switch & Socket Are Mounted In An Independent Switch Box) , (Vii) Two Nos 6A/16A 5-Pin Socket Point Controlled By Two Nos 16A Switch With Indicator. (Switch & Socket Are Mounted In An Independent Switch Box White Colour) , (Viii) Two Nos 6A/16A 5-Pin Socket Point Controlled By Two Nos 16A Switch With Indicator. (Switch & Socket Are Mounted In An Independent Switch Box Black Colour) , (Ix) Two Nos Of 6A Independent 5-Pin Socket Points Controlled By Two Nos Of 6A Switches. (White Colour) , Supply, Installation, Testing And Commissioning Of Power Points By Providing Following Switches/Sockets, Mounted Flush To The Walls Usingms Boxes, Inner Plates, Front Plate, Modular Switches And Sockets With All Wiring Accessories. (I) 2 Module , (Ii) 3 Module , (Iii) 4 Module , (Iv) 6 Module , (V) 8 Module , (Vi) 12 Module , (Vii) 16 Module , Supply, Installation, Testing And Commissioning Of Surface/Concealed Type Of Main Circuit Wiring From Panel/Db To Dbs, Db To Switch Boxes And Switch Box To Other Switch Boxes Using 1100V Grade Pvc Insulated Multistranded Frls Copper Wires, To Be Drawn Through Existing Laid Conduits. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. (The Item Excluding Cost Of 25Mm Dia Frls Pvc/Ms Conduit-Circuit Wiring In The Existing Conduits) (I) 3 Runs Of 1.5 Sq.Mm. Frls Copper Wiring In The Existing Laid Frls Pvc/Ms Conduits. (This Item Will Be Considered Only Where The Point Wiring Exceeds The Mentioned Length) , (Ii) 2 Runs Of 2.5 Sq.Mm. & 1 Run Of 1.5 Sq.Mm. Frls Copper Wiringin The Existing Laid Frls Pvc/Ms Conduits. , (Iii) 2 Runs Of 4 Sq.Mm. & 1 Run Of 2.5 Sq.Mm. Frls Copper Wiringin The Existing Laid Frls Pvc/Ms Conduits. , (Iv) 2 Runs Of 6 Sq.Mm. & 1 Run Of 2.5 Sq.Mm. Frls Copper Wiringin The Existing Laid Frls Pvc/Ms Conduits. , (V) 4 Runs Of 4 Sq.Mm. & 2 Runs Of 2.5 Sq.Mm. Frls Copper Wiringin The Existing Laid Frls Pvc/Ms Conduits. , (Vi) 4 Runs Of 6 Sq.Mm. & 2 Runs Of 2.5 Sq.Mm. Frls Copper Wiringin The Existing Laid Frls Pvc/Ms Conduits. , (Vii) 4 Runs Of 10 Sq.Mm. & 2 Runs Of 4 Sq.Mm. Frls Copper Wiringin The Existing Laid Frls Pvc/Ms Conduits. , Supply And Installlation Of Surface/Recessed Type Frls Pvc, Rigid/Flexible, Conduits Of The Following Sizes With Required Couplers, Junction Boxes, Bends, Ceiling/Wall Plates, Metal Boxes, Draw Boxes & Top Cover Plate (3Mm Hylam Sheet), Clamps, Screws, Bolt & Nuts And Necessary Fixing Accessories Etc. The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer: (I) 20Mm Dia 2Mm Thick Rigid Pvc Conduits. , (Ii) 25Mm Dia 2Mm Thick Rigid Pvc Conduits. , (Iii) 20Mm Dia 1.6Mm Thick Rigid Pvc Conduits. , (Iv) 25Mm Dia 1.6Mm Thick Rigid Pvc Conduits. , (V) 20Mm Dia 2Mm Thick Rigid Frls Pvc Conduits. , (Vi) 25Mm Dia 2Mm Thick Rigid Frls Pvc Conduits. , (Vii) 20Mm Dia 1.6Mm Thick Rigid Frls Pvc Conduits. , (Viii) 25Mm Dia 1.6Mm Thick Rigid Frls Pvc Conduits. , (Ix) 20Mm Dia 1.6Mm Thick Rigid Ms Conduits. , (X) 25Mm Dia 1.6Mm Thick Rigid Ms Conduits. , Part-B- Distribution Board Supply, Installation, Testing And Commissioning Of Following Ways Of Surface/Flush Mounting, Double Door Phase Segregation Seven Segment Type Tpn Mcb Dbs Of Sheet Steel, Powder Coated, Ip42 Protection, Metal Door And Cable End Box Etc. The Item Including Terminal Connectors For All Incoming And Outgoing Circuits, Duly Pre-Wired With Suitable Size Of Frls Pvc Copper Wires Upto Terminal Blocks, Tinned Copper Bus Bar Of Suitable Rating, Neutral Links, Earth Bars, Detachable Gland Plate, Interconnections By Using Crimping Type Ferrules & Copper Lugs, And Engraving Of Laminated As-Built Circuit Drawings In The Door Inside Etc. The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same In Case Of Flush Mounting As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer: (I) 4Way , (Ii) 6Way , Supply, Installation, Testing And Commissioning Of Following Ways Of Surface/Flush Mounting, Vtpn Mcb Dbs Of Sheet Steel, Powder Coated, Ip43 Protection, Metal Door And Cable End Box Etc. The Item Including Terminal Connectors For All Incoming And Outgoing Circuits, Duly Pre-Wired With Suitable Size Of Frls Pvc Copper Wires Upto Terminal Blocks, Tinned Copper Bus Bar Of Suitable Rating, Neutral Links, Earth Bars, Detachable Gland Plate, Interconnections By Using Crimping Type Ferrules & Copper Lugs, And Engraving Of Laminated As-Built Circuit Drawings In The Door Inside Etc. The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same In Case Of Flush Mounting As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer: 12 Way , Supply, Installation, Testing And Commissioning Of Following Ways Of Surface/Flush Mounting, Spn Mcb Dbs Of Sheet Steel, Powder Coated, Ip43 Protection, Metal Door And Cable End Box Etc. The Item Including Terminal Connectors For All Incoming And Outgoing Circuits, Duly Pre-Wired With Suitable Size Of Frls Pvc Copper Wires Upto Terminal Blocks, Tinned Copper Bus Bar Of Suitable Rating, Neutral Links, Earth Bars, Detachable Gland Plate, Interconnections By Using Crimping Type Ferrules & Copper Lugs, And Engraving Of Laminated As-Built Circuit Drawings In The Door Inside Etc. The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same In Case Of Flush Mounting As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer: (I) 8Way , (Ii) 12Way , Supply, Installation, Testing And Commissioning Of Following Ratings & Poles Of Single Phase / Three Phase C Curve, 10Ka Mcbs To Be Fixed In The Existing Mccb/Mcb Dbs Or Enclosures Complete With Interconnections By Using Crimping Type Ferrules And Copper Lugs Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer: (I) 6A To 32A Single Pole Mcb , (Ii) 40A To 63A Singl Pole Mcb , (Iii) 6A To 32A Singl Pole Neutral / Double Pole Mcb , (Iv) 40A To 63A Singl Pole Neutral / Double Pole Mcb , (V) 6A To 32A Triple Pole Mcb , (Vi) 40A To 63A Triple Pole Mcb , (Vii) 6A To 32A Four Pole Mcb , (Viii) 40A To 63A Four Pole Mcb , Supply, Installation, Testing And Commissioning Of Following Ratings & Poles Of Three Phase 18Ka Adjustable Thermal Magnetic Release Type Mccbs To Be Fixed In The Existing Mccb Dbs Or Panels Or Enclosures Complete With Interconnections By Using Crimping Type Ferrules And Copper Lugs Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer:100A Four Pole Mccb , Supply, Installation, Testing And Commissioning Of Following Ratings & Poles Of Single Phase / Three Phase Rccbs To Be Fixed In The Existing Mccb/Mcb Dbs Or Enclosures Complete With Interconnections By Using Crimping Type Ferrules And Copper Lugs Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer: (I) 25A Double Pole Rccb, 30Ma , (Ii) 63A Four Pole Rccb, 30Ma , (Iii) 40A Four Pole Rccbo, 30Ma , (Iv) 32A Four Pole Rccbo, 300Ma , (V) 63A Four Pole Rccb, 300Ma , Supply And Installation Of Blanking Plates In The Existing Mccb/Mcb Dbs Or Enclosures Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer: , Supply, Installation, Testing And Commissioning Of Following Ratings & Poles Of Single Phase / Three Phase Rccbs To Be Fixed In The Existing Mccb/Mcb Dbs Or Enclosures Complete With Interconnections By Using Crimping Type Ferrules And Copper Lugs Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer: (I) Double Pole Enclosure For Mcbs , (Ii) Four Pole Enclosure For Mcbs , Supply, Installation, Testing And Commissioning Of Following Weather Proof Boxsuitable For Independent Mounting Of Mcb/Mccb/Rccbs Complete With All Necessary Fixing Accessories Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer: (I) Double Pole Enclosure For Mcbs , (Ii) Four Pole Enclosure For Mcbs , Supply, Installation, Testing And Commissioning Of Following Weather Proof Boxsuitable For Independent Mounting Of Mcb/Mccb/Rccbs Complete With All Necessary Fixing Accessories Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer: (I) 100 X 100 X 50 Mm , (Ii) 150 X 150 X 50 Mm , (Iii) 300 X 300 X 50 Mm , Part-C Luminaires And Fixtures Installing, Testing And Commissioning Of The Following Luminairesincluding Driver, Connecting Wire,Clamps, Screws, Bolt & Nuts, Down Rods, Required Connector Block Terminals And Necessary Fixing Accessories Etc. (I) 230V, 18W Led Spot Light Luminarie. , (Ii) 230V, 15W Led Down Light Luminaire , (Iii) 230V, 15W Led 8 Profile Light Luminaire , (Iv) 230V,15-20W/Meter Led Strip Light Fittings. , Installing, Testing And Commissioning Of Wall Mounted Fan , With Mounting Frame, All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Part-D Lt Panels Supply,Installation, Testing And Commissioning Of 415V Cubical Type, Fully Compartmenalised, Floor Mounted Type Lt Switch Boards Fabricated With 14G Crca Sheet, Powder Coated With Siemens Grey (Ral 7032) After Seven Tank Process And Complete With Welded & Bolted Design And All Incoming & Outgoing Switch Gears As Per The Following.Suitable Aluminuim Busbars, Control Wiring, Control Fuses, Seperate Metering Compartment (Incoming) With Multi Function Meter, Phase Indications With Necessary Control Wiring. Safety Features And Items Including Necessary Earthing Throughout The Bottom Length, 6 Sq.Mm Frls Copper Wire Interconnections For Compartment Earthing, Complete Copper Control Wiring With Crimping Type Ferrules, Copper Lugs, Proper Engravation On Each Compartment Etc.The Switch Boards Shall Be Cpri Approved Of Factory Assembled And Tested. All The Mccbs With Micro Processor/Thermal Magnetic Releases And Have Rotary Handle Mechanism & Spreader Current Density Not More Than 0.7A/Sq.Mm For Aluminium Bus Bar. Neutral Current Rating Is Half The Phase Currentall Busbars Shall Be Fixed With Standard Space Clearance And With Colour Coated Heat Shrinkable Pvc Sleeves With Dmc/Smc Bus Bar Supports And Suitable Earth Bus (25 X 3Mm Cu).The Cable Entry Shall Be From The Bottom/Top As Per Site Requirement.The Item Including Cost Of Ms Base Frame Of 75Mm Height, 3.15Mm Sheet Steel Or 40X40x6mm Ms Angle For Load Bearing Members, Lifting Hooks, Steel Support Structure Required For Erection And Its Painting, Minor Civil Works, Vendor Drawings, Necessary Safety Clearance From Statutory Authorities, Panel Approval From Tneb Till Obtaining Final Power Supply, All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer.The Contractor Shall Submit General Arrangement & Control Wiring Drawings And Get Approval From Site Engineer/Consultant Before Commence The Fabrication Works. Sub Panelincomer: (I) 100A 4P On-Load Auto Change Over Switch With Control Mcbs, With Rotary Handle Mechanism & Spreader And Phase Indications Etc. - 1 No. (Ii) 100A, Tpn, 25Ka, Mccb With Adjustable Thermal Magnetic Releases And Rotary Handle Mechanism & Spreader- 1 No , Metering:(I)3 Nos-Ct Ratio 100/5A,Cl:1.0 Tape Insulated Type With Suitable Sorting Links..(Ii) 3 Nos-Ct Ratio 100/5A,Cl:1.0, 15Va Tape Insulated Type With Suitable Sorting Links Power Factor Sensingrelay1 Set – Indication Lamps For R,Y,B, Breaker On(Red), Breaker Off (Green), Breaker Trip (Amber) With Control Mcbs.Bus Bar:100A, Tpn, 25Ka, For 1 Sec Aluminium Bus Bar (I)Phase: Current Density Not More Than .7A/Sq.Mm(Ii)Neutral: Half Of The Phase Current (0.5 X Phase) (Iii) Earth: 25X3mm Copper Flatoutgoing:(I)63A Fp 10Ka Mcb C Curve- 3 Nos(Ii) 40A Fp 10Ka Mcb C Curve- 1 No(Iii)32A Fp 10Ka Mcb C Curve- 3 Nos (Iv) 16-32A Dp 10Ka Mcb C Curve- 1 Nonote:All Outgoing Feeders Should Be Provided In Individual Compartment , Supply, Installation, Testing And Commissioning Of 415V Cubical Type, Non Compartmenalised, Floor/Wall Mounted Type Automatic Power Factor Correction Panel Board Fabricated With 14G Crca Sheet, Powder Coated After Seven Tank Process And Complete With Bolted Design And The Provisions As Follows. Gas Filled Cylindricalheavy Duty Capacitors (App Type) Of 10Kvar . The Switch Boards Shall Be Cpri Approved Of Factory Assembled And Tested.The Cable Entry Shall Be From The Bottom/Top, Suitable Aluminuim Busbars, Control Wiring, Control Fuses, Seperate Metering Compartment, Phase Indications, Safety Features And Items Including Necessary Earthing Throughout The Bottom Length, 6 Sq.Mm Frls Copper Wire Interconnections For Compartment Earthing, Complete Copper Control Wiring With Crimping Type Ferrules, Copper Lugs, Proper Engravation On Each Compartment Etc. Also The Cost Inclusive Of Ms Base Frame, Steel Support Structure Required For Erection And Its Painting, Minor Civil Works, Vendor Drawings, Necessary Safety Clearance From Statutory Authorities, Panel Approval Fromceig/Tneb/Tangedco Till Obtaining Final Power Supply, All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. All The Mccbs With Micro Processor / Thermal Magnetic Releases And Have Rotary Handle Mechanism. Each Compartment/Section Shall Have Exhaust Fans The Incoming Shall Have Metering, Ammeter & Voltmeter With Selector Switches, Ryb Indication Lamp With Control Mcbs And 8 Stage Apfc Relay Etc. Each Outgoings Shall Have Set Of Capacitor Duty Contactors, Set Of On/Off Indication Lamps And Set Of On/Off Push Button Etc. Incomer:(I)32A 4P 10Ka Mcb C Curve- 1 No Bus Bar:100A, Tpn, 25Ka, For 1 Sec Aluminium Bus Bar(I) Phase: Current Density Not More Than 0.8A/Sq.Mm(Ii)Neutral: Half Of The Phase Current (0.5 X Phase) (Iii) Earth : 25 X 3 Mmcopper Flat Outgoing:(I)3 Kvar Feeder Fitted With 25A Tp 10Ka Mcb - 1 No. (Ii) 2 Kvar Feeder Fitted With 20A Tp 10Ka Mcb - 1 No.(Iii) 1 Kvar Feeder Fitted With 20A Tp 10Ka Mcb - 5 Nos , Lt 3 Phase Metering Panel Lt 3 Phase Metering Panel With Tpn Fuse And Metering Provisions For 1 No As Per Tneb Standard With Double Earthing.100A,Rwf Fuse (3Nos) + Neutral Link- 1 Set 100A, Fp, 25Ka, Mccb With Adjustable Thermal Magnetic Releases And Rotary Handle Mechanism & Spreader - 1 No. , Part-Elt Cabling Supply, Laying, Testing And Commissioning Of Following 1.1Kv Grade Multicore Aluminium Conductor Xlpe/Pvc Insulated Gi Round(Upto 10Sqmm) / Flat(16Sqmm And Above) Armoured Pvc Sheathed Cables (Without Any Cable Joint) Drawn Through Tray Or Steel Supports Or Clamping On The Ceiling/Wall Or Pre-Excavated / Pre-Formed Trenches Or Gi Pipe Sleeves / Hume Pipes With Suitable Clamping Arrangement And Fixing Accessories, Cable Routemarkers, Cable Ties, Identification Tags Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. (I) 3.5C X 50 Sq.Mm Aluminium Xlpe Cable , (Ii) 3.5C X 35 Sq.Mm Aluminium Xlpe Cable , (Iii) 4C X 16 Sq.Mm Aluminium Xlpe Cable , (Iv) 4C X 10 Sq.Mm Aluminium Xlpe Cable , (V) 4C X 6 Sq.Mm Aluminium Xlpe Cable , Supply, Laying, Testing And Commissioning Of Following 1.1Kv Grade Multicore Copper Conductor Xlpe/Pvc Insulated Gi Round(Upto 10Sqmm) / Flat(16Sqmm And Above) Armoured Pvc Sheathed Cables (Without Any Cable Joint) Drawn Through Tray Or Steel Supports Or Clamping On The Ceiling/Wall Or Pre-Excavated / Pre-Formed Trenches Or Gi Pipe Sleeves / Hume Pipes With Suitable Clamping Arrangement And Fixing Accessories, Cable Routemarkers, Cable Ties, Identification Tags Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. (I) 4C X 10 Sq.Mm Copper Xlpe Cable , (Ii) 4C X 6 Sq.Mm Copper Xlpe Cable , (Iii) 4C X 4 Sq.Mm Copper Xlpe Cable , Supply And Termination Of The Following Sizes Of 1.1Kv Xlpe/Pvc Insulated Al/Cu Conductor Cables With Single Compression Brass Cable Glands And Tinned Copper Lugs Including Gland Earth Clips, Adequate Size Of Bare Copper Wire Connecting To The Main Bus Bars Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. (I) 3.5C X 50 Sq.Mm Aluminium Xlpe Cable , (Ii) 3.5C X 35 Sq.Mm Aluminium Xlpe Cable , (Iii) 4C X 16 Sq.Mm Aluminium Xlpe Cable , (Iv) 4C X 10 Sq.Mm Aluminium Xlpe Cable , (V) 4C X 6 Sq.Mm Aluminium Xlpe Cable , (Vi) 4C X 10 Sq.Mm Copper Xlpe Cable , (Vii) 4C X 6 Sq.Mm Copper Xlpe Cable , (Viii) 4C X 4 Sq.Mm Copper Xlpe Cable , Supply And Erection Of Following Size Of Hot Dip Gi Ladder Type Cable Trays Including Horizontal And Vertical Bends, Reducers, Tees, Right Angles, Cross Members And Other Accessories Etc. The Item Including Cost Of Steel Support Structures At Every 0.6M/1M Intervels As Required For Suspend From The Ceiling Or Supported From Walls With Ms Suspenders/Brackets And All Complete With Painting/Powder Coating Etc. All Complete As Per The Specifications / Drawings Ad Or As Directed By The Engineer. (I) 150 X 50 X 2Mm , (Ii) 200 X 50 X 2Mm , (Iii) 300 X 50 X 2Mm , Supply And Erection Of Following Size Of Perforated Gi Cable Trays Including Horizontal And Vertical Bends, Reducers, Tees, Right Angles, Cross Members And Other Accessoriess Etc. The Item Including Cost Of Steel Support Structures At Every 0.6M/1M Intervels As Required For Suspend From The Ceiling Or Supported From Walls With Ms Suspenders/Brackets And All Complete With Painting/Powder Coating Etc. All Complete As Per The Specifications / Drawings Ad Or As Directed By The Engineer. (I) 150 X 50 X 2Mm Without Cover , (Ii) 200 X 50 X 2Mm Without Cover , (Iii) 300 X50 X 2Mm Without Cover , (Iv) 450 X50 X 2Mm Without Cover , Laying Cables Buried Underground At 750Mm. From Fgl Including Necessary Excavation, Supply And Placingof Cable Markers And Backfilling In Compacted Layers, All Complete As Per Specifications, Drawings And /Or As Directed By The Engineer. , Supply, Installation Of Following Sizes Of Heavy Duty Pvc Pipe For Cable Crossing Of Basement Cable Entry & External Lights And The Like, All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. (I) 50Mm Dia , (Ii) 100Mm Dia , Supply, Installation Of Following Sizes Of Hume Pipes For Cable Crossing Of Drains, Roads, Sanitary And Water Supply Lines And The Like, All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. 150Mm Dia , Supply And Erection Of Following Size Of Pvc Trunking Channelincluding Horizontal And Vertical Bends, Joints,Tees, Angles, Cross Members And Other Accessoriess Etc. The Item Including Cost Of Support Clamping At Every 0.6M/1M Intervels As Required For Wall / Floor Mounting System And All Complete Etc. All Complete As Per The Specifications / Drawings Ad Or As Directed By The Engineer. (I) 50 X 80 Mm , (Ii) 50 X 105 Mm , Part-F Diesel Generator Supply, Unloading & Handling, Erection, Testing And Commissioning Of Following Ratings Of Dg Set With Standard Accessories Coupled To Alternator, 3 Phase, 4 Wire, 0.8 Pf (Lag), 415 V Mounted On A Channel Iron Base Frame With Foot Mounting Avm Pads, Fuel Tank (In Built), Charged Battery With Leads, Silencer Along With Exhaust Stack Raised Above Terrace Level(Avg 30M), Composite Type Acoustic Enclosure And Standard Control Panel. The Governor Shall Be Of Electronic & Mechanical Type And The Items Including Erection Of Amf Panel And Complete With Necessary Control Wiring/Cabling, Metering, Indication Lamps And Fixing Accessories Etc. 30Kva , Part-G Ups/Inverter Supply, Erection, Testing And Commissioning Of 1 Phase, 230 V, 1Kva 1P -In 1P Out Ups With Suitable Bcb (Battery Circuit Breaker), Filters, Suitable Tublers Batteries With 30Minutes Backup With Necessary Fixing Accessories Etc. , Supply, Erection, Testing And Commissioning Of 1 Phase, 230 V, 3Kva 1P -In 1P Out Ups With Suitable Bcb (Battery Circuit Breaker), Filters, Suitable Tublers Batteries With 30Minutes Backup With Necessary Fixing Accessories Etc. , Part-H Earthing Supply, Installation, Testing And Commissioning Of Earth Station Comprising Of 50Mm Outer Diameter And 3 Meter Length Of Copper Safe Earth Electrode, Including Approved Clamps, Bolts & Nuts, 450M X 450Mm Brick Masonary Chamber, Heavy Duty Ci Cover, Homogeneous Layers Of Earth Enhancing Backfilling Materials (Bentonite/Fly Ash) Are Placed Around The Earth Pipe As Per Standards (Is 3043), The Items Including Cost Of Excavation, Backfilling Of Earth Etc. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supply, Installation, Testing And Commissioning Of Earth Station Comprising Of 50Mm Dia 3 Meter Long Galvanised Iron Pipe Earth Electrode And 25X3mm Copper Flat, Including Approved Clamps, Bolts, Nuts, Special Backfill Compound (Bentonite/Fly Ash), 450Mm X 450Mm Brick Masonary Chamber, Heavy Duty Rcc / Ci Cover, Drilling Into All Types Of Earth And Rock, Any Excavation And Backfilling, All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supply, Laying, Testing And Commissioning Of Following Sizes Of The Earth Conductors For The Electrical System Which Including Cost Of Supply And Fixing Of Saddles, Insulators, Clamps, Screws, Bolt & Nuts And Providing Earth Work Of 2 Depth, Sleeves Wherever Required Etc., All Complete As Per Specifications, Drawings And/Or As Directed By The Engineer. (I) 25X6mm Hot Dip Gi Flat. , (Ii) 25X3mm Copper Flat. , (Iii) 300Mm Long 25X6mm Hot Dipped Cu Flat. , (Iv) 25X3mm Hot Dip Gi Flat. , (V) 8 Swg Copper Wire. , (Vi) 10 Swg Copper Wire. , Part-I Safety Accessories Supply And Installation Of The Following Safety Accessories To Be Installed In The Electrical Panel Room. First Aid Box. (Is Marked - As Per Standard Requirement) , Supply And Fixing Of 6 Kgs Co2 Type (Isi Marked) Fire Extinguisher Complete With All Clamps And Hardwares Etc. , Supply And Position Of 1.1 Kv Grade 2Mtr X 1Mtr Rubber Mat For Lt Switch Boards To Suit The Switch Board. (As Per Standard & Isi Marked) , Supply And Fixing Of Shock Treatment/First Aid Treatment Chart In Tamil, Hindi And English, Complete With Necessary Fixing Accessories Etc. , Part-J Telephone System Supply And Fixing Of Rj-11Modular Type Outlet Mounted On Suitable Zinc-Passivated Metal Box For Telephone Complete With Metal Box, Front Plate, Screws And Fixing Accessories Etc.,The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same Incase Of Recessed Mounting And All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supply And Fixing Of Rj-45 (Cat-6) Modular Type Outlet Mounted On Suitable Zinc-Passivated Metal Box For Telephone Complete With Metal Box, Front Plate, Screws And Fixing Accessories Etc.,The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same Incase Of Recessed Mounting And All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supply And Laying Of High Quality Cat-6 Ethernet Lan Cable Preferably With Fr Pvc Insulation To Be Laid In Existing Tray/Raceways/ Conduit From Individual Telephone To Network Jack/Switch/Patch Panel/Hub Located In The Communication Room. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supply, Laying And Termination Of Following Sizes Of Telephone Cable Laid In Exitingconduit/Tray/Raceways From Krone Junction Box To Other Krone Junction Box/Epabx Etc.And All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. 2 - Pair Cable , 5 - Pair Cable , Supply And Fixing Of The Following Telephone Krone Type Junction Boxes Enclosed In Ms Box With Hinged Cover With Lock & Key Arrangements Etc.The Item Including Necessary Clamping And Making Good The Same In Case Of Recessed Mounting As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. 5 - Pair Kjb , Part-Kdata Networking System Supply And Fixing Of Rj-45 Modular Type Data Outlet (Cat-6A) Mounted On Suitable Zinc-Passivated Box Complete With Metal Box, Front Plate, Screws And Fixing Accessories Etc.The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same In Case Of Flush Mounting As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supply Andlaying Of High Quality Cat-6A Ethernet Lan Cable Preferably With Fr Pvc Insulation To Be Laid In Exisitng Tray/Conduit/Racewaysfrom Individual Data To Network Jack/Switch/Patch Panel/Hub Located In The Communication Room.All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supply, Laying And Termination Of High Quality Armoured Optical Fiber (48 Fibers) Along With The All Accessories Connectors, Switches Etc , Fixing Of Modular Type Information Outlet (For Wi-Fi) With Necessary Fixing Accessories. The Item Including Necessary Chipping/Cutting The Wall And Making Good The Same In Case Of Flush Mounting As Required. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supply, Laying And Termination Of 6 Pair Fibre Optic Cable Laid In Existing Conduit/Tray/Hume Pipe With The All Necessory Accessories As Required. , Supply, Laying And Termination Of Hdmi Cable Of 15 Meters In Length Laid In Existing Conduit/Tray/Hume Pipe With The All Necessory Accessories As Required. , Supply, Laying And Termination Of Hdmi Cable Of 15 Meters In Length Laid In 40Mm Pvc Pipe With The All Necessory Accessories As Required. , Supply, Fixing , Testing And Commissioning Of 24 Port Switch Patchpanelwith The All Necessory Accessories As Required. , Part-Lclosed Circuit Television System Supply, Laying And Termination Of High Quality Cat-6 Ethernet Lan Cable Preferably With Fr Pvc Insulation To Be Laid In Existing Pvc Pipe From Individual Cctv Camera Outlets To Network Jack/Switch/Patch Panel/Hub Located In The Communication Room. All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supplying And Installing Wall Or Ceiling Mounted Outdoor Type Fixed Dome Ip Camera With 1/3” 4Mp Ps Cmos Image Sensor 4Mp@25/30Fps (2560 × 1440), Ir Range Of 30 Mtrs,. The Items Inclluding Necessary Fixing Accessories. , Supplying And Installing Wall Or Ceiling Mounted Indoor Type Fixed Dome Ip Camera With 1/3” 4Mp Ps Cmos Image Sensor 4Mp@25/30Fps (2560 × 1440), Ir Range Of 30 Mtrs,. The Items Inclluding Necessary Fixing Accessories. , Supply, Fixing And Termination Of High Quality Rack Mounted Type Patch Panel With One Number Of 16 Port Poe Network Switch, Fixing Frames, Links And Interconnections, Necessary Accessories Etc., All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supply, Fixing And Termination Of High Quality Floor Mounted Type 6U Floor Mountable Powder Coated Rack With 3X5a Power Manager, 1 Position Fan, Min 1 Nos Of Shelf, Front Glass Double Door With Lock & Key With Suitable Network Port Switch, Fixing Frames, Links And Interconnections, Necessary Accessories Etc., All Complete As Per Specifications, Drawings And / Or As Directed By The Engineer. , Supplying And Installing Of 16 Channel Network Video Recorder With Max 320Mbps Incoming Bandwidth Smart H.265+/H.265/ Smart H.264+/H.264/Mjpeg Up To 12Mp Resolution Preview And Playback Support 8 Sata Hdds Up To 10Tb Each, 4 Usb (2 Usb3.0, 2Usb2.0) 2 Hdmi / 2 Vga Simultaneous Video Output Support Multi-Brand Network Cameras Support Raid 0/1/5/10 Mobile Software: Icmob, Gcmob Cms Software: Kvms Pro. The Items Including Supply Of 4Tb Hard Disk, Connectors, Pins And Providing Complete Configuration Etc. , Supplying And Installing Of Power Supply Unit Along With Necessary Battery Backup, Suitable For 1 Nos. 16 Channel Network Video Recorder System. , Supplying And Installing Of 32 Led Colour Monitor. , Part-M-Miscellaneous Liasioning With Tneb Including Submission Of Application & Documents For Obtaining Required Additional Demand Power. (Appx. Cost) , Hvac System Supply, Installation,Gas Charging, Testing And Commissioning Of Modulating Outdoor Units, With Multi Scroll/Rotary Compressorswith One Capacity Controlling Compressor, Special Pre-Coated Fins, Panel, Corrosion Resistant (Suitable For Seaside Installation) Coated Condenser, Inverter Based Condenser Fan Mounted As Indicated In The Drawing, Electrical & Microprocessor Panel, Isolating Valves And All The Necessary Accessories For Proper Functioning Of The Units, Having Following Approximate Capacities. Indicate For All Port Charges, Port Handling Charges, Other Local Duties, Loading, Transportation /Insurance Up To Site, Octroi Charges And All Other Taxes And Incidentals Complete Till Delivered At Site. Customs Duty And Countervailing Dutyfor The Above Imported Equipment. Receiving At Site Above Imported Equipment, Unloading, Storing, Handling Hoisting, Installing In Position, Effecting Connections, Anchoring, Grouting Testing And Commissioning Above Equipment Including Supplying And Installing All Necessary Indigenous Accessories As Required To Complete The Installationnote : Fins And Copper Tubes Of Air Cooled Condenser Alongwith Copper Tubing / Piping With All Joints And U-Bends Exposed To Coastal Areas Corrosive Atmosphere / Aggressive Ambient, Shall Be Painted With Special Orrosion Prevention Coating Either In Factory Or At Site. 14 Hp Odu Units , Supply,Erection, Testing And Commissioning Of Vrf Based Ductable / Fcu Type Indoor Units Complete With Remote And All Accessories,Vibration Isolators & Supports. The Each Indoor Units Shall Be With Potentilal Free Contactor To Connect With Bms. (I) 5.0 Tr With Wired Remote- Ductable , (Ii) Ceiling Mounted Fan Coil Unit - 2.56 Tr With Wired Remote- Fcu , (Iii) Cassette Type Unit - 1.32 Tr With Wireless Remote , (Iv) Hiwall Type Unit - 1.0 Tr With Wireless Remote , Supply, Installation., Testing And Commissioningof Centralized Remote Controller , Supply,Erection , Testing And Commissioning Of All Refrigerant Joints ( Necessary Filling Of Refrigerant Gas In Circuits, Ref. Pipe Pressure Test Etc.). , Supply, Installation, Testing And Commissioning Of Hiwall Splitunit Air Conditioner Comprising Indoor And Out Door Unit Interconected At Field By Refrigerant Piping. The Refrigerant Shall Be Working Onnon Cfc Based R407c/R410 A/R134a Refrigerant. The Indoor Unit Shall Comprise Multirow Dx Cooling Coil, Nylon Pre-Filter, Centrifugal Blower With Drive Motor Mounted In An Aesthetically Pleasing High Quality Plastic Casing. The Out Door Unit Shall Comprise, Rotary / Scroll Compressor/S, Condenser Coil, Propeller Fan, Ip55 Motor All Housed In A Powder Coated Casing. The Fan Shall Be Selected For Low Noise And Shall Be Provided With Fan Guard. The Unit Set Shall Be Supplied With Apower Cum Control Panel Incorporating All Switchgear Required For The Machines Functioning Along With Over Load Relay Etc. The Price Shall Include Corded / Cordless Remote Controler, Installation Of The Units As Per Site Conditions And Charging Of Necessary Refrigerant & Oil If Required. Suitable Contactor To Enable Trip On Receiving Fire Alarm Signal To Be Provided. 1.0 Tr Hiwall Split (Server Room Standby Unit) , Supply, Installation, Testing And Commissioning Ofsoftron Refrigerant Copper Piping With Nitrile Rubber Tubular Insulationwith 13/19Mm Thicknesswith Glass Cloth And Poly Shield Coating Between Indoor To Outdoor Unitsand Supporting Arrangements Etc… Suitable Size For Above Mentioned Dx Hi-Wall Split Units . , Supply, Installation, Testing And Commissioning Of Hard/Soft Drawn Soft Refrigerant Piping Along With Insulation And Supports, Between Indoor & Outdoor Units Duly Insulated As Per Specifications.The Brazing To Be Carried Out With Bleeding Of Nitrogen. The Copper Pipe To Be Insulated With 19 Mm Thick / 13 Mm Thick Nitrile Rubber Sleeves Or Sheet Shall Be Properly Supported With Hanger And Exposed Piping Shall Be Properly Supported In Cable Tray. (I) 41.3 Mm , (Ii) 34.9 Mm , (Iii) 28.6 Mm , (Iv) 22.2 Mm , (V) 19.1 Mm , (Vi) 15.9 Mm , (Vii) 12.7 Mm , (Viii) 9.52 Mm , (Ix) 6.5 Mm , Supply And Laying Of 2C X 1.5 Sqmm. Control Cabling & Earthing As Per Specifications Between Out Door Unit & Indoor Units. The Cables Should Be Cross Linked Polythene Insulated, Armoured Copper Cabling With A Low Smoke And Flame Sheath . Power Supply (3 Phase 415 Volts Will Be Made Available Near Outdoor Units. Contractor To Provide Panel For Onward Power / Control Supply To Outdoor Units Andpower Supply Single Phase Will Be Made Availabe Near Indoor Units Contractor To Provide Power/Control Supply To Indoor Units, Supports, Trays Etc. , Supply And Erection Of 200(W) X 75(H) Size Of Flat Gi Cable Trays Including Horizontal And Vertical Bends, Reducers, Tees, Right Angles, Cross Members And Other Accessoriess Etc. The Item Including Cost Of Steel Support Structures At Every 0.6M/1M Intervels As Required For Suspend From The Ceiling Or Supported From Walls With Ms Suspenders/Brackets And All Complete With Painting/Powder Coating Etc. All Complete As Per The Specifications / Drawings Ad Or As Directed By The Engineer. , Machine Made Gss Ducting With Flanges, Neoprene Gaskets, Factory Made Supports, With Black Painting As Per Specifications (Factory Made With Ductmate Flanges) (I) 24 G Gi Ducts , (Ii) 22 G Gi Ducts , Supply And Installation Of Thermal Insulation 13Mm Thk Closed Cell Nitrile Rubber With Suitable Adhesive As Per Specification , Supply And Installation Of Accoustic Insulation 10Mm Thk Open Cell Nitrile Rubber With Suitable Adhesive As Per Specification , Supply And Installation Of 6 Ht Cont. Al. Powder Coated Grill For Supply And Return Air For Ductable Units , Supply And Installiion Of Gi Collar Damper 600 X150 Mm. , Supply And Installation Of Aluminium Powder Coated 3 Slot Diffuser With Hidden Mist Damper And Fixing Arrangements Etc… , Supply And Installation Of Aluminium Powder Coated Fresh Air Louver With Bird Screenanddamper And Fixing Arrangements Etc… 200 X 200 Mm , Supply And Installation Of Fire Retardant Canvass Connection , Providing And Fixing In Position The Followingupvc Drain Pipes Cut To Required Lengths And Installed With All Screwed Joints, And Providing And Fixing In Position The Necessary Elbows, Tees And Reducers As Per Specifications And Shall Be Insulated With 6Mm Thick Nitrile Rubber. (I) 25 Mm , (Ii) 32 Mm , Supply, Installation, Testing And Commissioning Of Poly Shield Coating With Glass Wool Packing For Weather Proof , Fire Fighting System Supply, Install, Test And Commission Of Boosterpump Terrace Pump Located At Terrace Level, Capacity: 450 Lpm At 35 Mtr. With Pressure Of 3.5Kg / Sq.Cm At The Top Most Hydrant, Complete Head, Horizontal Centrifugal Pump With Bronze Impeller, Ss Shaft, Mechanical Seal,Coupled To 10Hp,2900 Rpm, Tefc, Squirrel Cage Induction Motor Complete Withm.S. Base Frame, Anti Vibration Pad, Foundation Bolts, Pressure Gauge, Pressure Switchwith Drain Valve,And All Other Necessary Fixing Accessories. , Supply, Erection, Testing And Commissioning Ofc Class M.S Heavyfor Downcomer System As Per Is : 1239 For Pipes With Welable Fittings, Valves Necessary, All Structural Supports And Accessories.The Quoted Rate Shall Be Includes One Coat Of Primer And Two Coat Enamel Paint Of Approved Colour And Also Chasing / Chipping Walls Making Bore Hole In Walls / Floor And Making Them Good With Filler Material And Finished In Cement Mortar Etc. Complete In All Respect. (I) 100Mm Nb , (Ii) 80Mm Nb , (Iii) 25Mm Nb , Supply, Erection, Testing Andcommissioning Of `Fire Hose Cabinet (Fhc) In Size Of 750Mm X 900 Mm X 250 Mm.Hinged Door Shutter And Frame And Fabricated Out Of 14 Swg Sheet Steel, Fitted With 4Mm Thick Toughned Glass With Rubber Beeding In The Front Including Finishing With Powder Coat Painting Complete. The Rate Shall Be Inclusive Of Stand For Mounting, All Fasteners Etc, And Cabinet Shall Be Powder Coated Finish Of Red Colour Both Inside And Outside. , Single Headed Hydrant Valve As Per Is 5290, Made Of Gun Metal With 63 Mm Dia Instantaneous Outlet Of 80 Mm Dia Fanged Inelt ,Blank Caps , Chain And Hand Wheels Etc Complete. , 15 M Long, 63Mm Dia Rrl Hose With Instantaneous Couplings And Hoses Shall Be Stored Inside The Hose Cabinet. , 1 No. Gun Short Branch Pipe With Nozzle. , Fire Hose Reel Drum (As Per Isi)Wall Mounted, Swinging Type 18 Swg Ms Sheet, Fitted With 19 Mm Dia X 36 M Long, High Pressure Hose With 5 Mm Outletnozzle With Shut Off Valve (Is: 884-1969) , One No 25Mm Dia Ball Valve , Supply, Fixing, Testing And Commissioning Of Fire Brigade Inlet (Pumping In Breech) Connection, Having Gunmetal Body With 1 Nos. 63 Mm Size Gunmetal Male Instantaneous Inlets (With Nrv), And 100 Mm Size Flanged Outlet, Suitable For Connection To Dry Riser Piping. Fire Brigade Inlet Body Shall Be Provided With Drain Valve. Fire Brigade Inlet Connection Shall Be Isi Approved , Supply, Erection, Testing And Commissioning Of Slimseal Typebutterflyvalves Withshperoidalgraphite Irondisc(Sg Iron), With Nitrile Rubber Sealand Tested Topn 16 Including A Set Of Suitable Gi Flanges, As Per Bs 10 Table - 1, Bolts, Nuts Gi Washers, Neoprene Rubber Gaskets Etc., Complete. 100Mm Nb , Supply, Erection, Testing And Commissioning Of Dual Plate Non-Return Valves With Ci Body &Upto 125Nb Pn 16 Including A Set Of Suitable Ms Flanges, As Per Bs 10 Table - 1, Bolts, Nuts Gi Washers, Neoprene Rubber Gaskets Etc., Complete. 100Mm Nb , Supply, Erection Testing & Commissioning Of Pot Strainer / Y Strainer With Ci Bodytested Topn 16 Including A Set Of Suitable Gi Flanges Rate Shall Include For Rubber Insertion, Bolts, Nuts Msflanges.100Mm Nb , Supply, Erection, Testing And Commissioning Of 25Mm Dia Air Release Valve. The Rate Shall Be Inclusive Of Accessories.25Mm Dia Air Release Valve , Supply, Installation, Testing And Commissioning Of Terrace Fire Pump Panel Withtype-2 Co-Ordination Dol Starters For The Booster Pump And Complete With Auto/Manual Switch, Timers, Rotary Switches, Indication Lamps, Enclosure Being Vermin & Dust Proof (Ip65), Necessary Alarms, Push Buttons, Etc. The Panel Shall Also Be Provided With Industrial Hooter For Alarm And Necessary Suitable Relays Shall Be Provided - 450 Lpm Pump , Automatic Detection And Manual Fire Alarm System Main Control Panel: Supply, Installation, Testing & Commissioning Of Microprocessor Based Intelligent Analogue Addressable, Modular,Expandable, Networkable, 02- Loopfire Alarmcontrol Panel With Minimum 640 Character Lcd Display, Multiple Access Levels, Event History File In Nos.N-Volatile Memory (Eeprom). The Panel Shall Support Programmable Relay For Controlling Lifts, Staircase Pressurizations Fans, Lift Shaft & Lift Lobby Pressurization Fans, Toilets Exhaust Fans, Ventilation Fans At Fire Pump Room, Monitoring Of Fire Hydrant Pump Controlled By Powerful Boolean Logic Equation. The Panel Shall Have 240 Volts Ac Power Supply, Automatic Battery Charger, 24 Volts, Sealed Lead Acid Maintenance Free Batteries Sufficient For 24 Hours Nosrmal Working And Then Be Capable Of Operating The System For 60 Minutes During Emergency Condition. The Panel Shall Be Ul Listed/ Fm Approved. , Supplying, Installing, Testing And Commissioning Of Loop Card , Supplying, Installing, Testing And Commissioning Of Sounder With Strobe Light , Supplying, Installing, Testing And Commissioning Of Addressable Manual Call Point With Back Box. , Supplying, Installing, Testing And Commissioning Of 2C X 1.5 Mm², Armoured, Single Stand, Outer Sheathed, Frls, Pvc Insulated Copper Conductor Cable Confirming To Specified Is Standards . , Supply, Installation, Testing & Commissioning Of The Following: Sensors Confirming To The Description,And Standards. (All Floors& Common Area) Supplying, Installing, Testing And Commissioning Of Addressable Photo Electric Smoke Detector (Optical) With Base, Junction Box And Other Accessories (True Ceiling & Above False Ceiling) , Supplying, Installing, Testing And Commissioning Of Rate Of Rise Heat Detector With Base, Junction Box And Other Accessories. , Supplying, Installing, Testing And Commissioning Of Addressable Photo Electric Multi Sensor Detector (Optical) With Base, Junction Box And Other Accessories. , Analogue Addressable Fault Isolator Module Capable Of Monitoring Shorted Loop Circuit And Automatically Restore Communications When Shorted Conditions Are Corrected , Response Indicator For All Detectors Located Above False Ceiling For Visual Identificaion Of Detector , Supplying, Installing, Testing And Commissioning Of Analogue Addressable Monitor Module (Single Input Module) For Integrating Sprinkler Flow Switch In All Floors And Status Of Fire Pumps With Facp At Ground Floor. , Supplying, Installing, Testing And Commissioning Of Addressable Control Module For Activating The Notification Application Devices. Shall Have Supervisory Facility To Supervise The Auxillary Power Supply As Well As The Notifcation Appliance Circuits..Shall Have Binary Coding Setting Dp Switches, Shall Have An Led Indication Fornormal Working And Active Modes -Approval: Ul Listed , Supplying, Installing, Testing And Commissioning Of Power Supply Unit Which Provides 24V Dc Output For Connecting All Relay Control Modules And Other Modules. The Power Supply Unit Will Be Located In Fire Control Room At Ground Floor And In Designated Location Preferably Near To Fa/Pa Shaft In Typical Floors. , Fire Extinguishers Supplying, Installing And Commissioning Portable Fire Extinguishers Of Following Type & Capacity. (I) Carbon-Di- Oxide Type Fire Extinguisher Of 4.5 Kgs. Capacity, Co2 Gas As Per Is 15222 With Controll Discharge Mechanism Fitted With Hose & Horn Applicable On Class B Fire Rating 21Bconfirming To Is: 15683. , (Ii) Abc Powder Type Fire Extinguisher Of 4 Kgs. Capacity, With Initial Filling (Mono Ammonium Phospate Powder 90) In Brand New Cylinder With Powder Coated Finish, Stored Pressur Type, Pressure Gauge, Controllable Discharge Mechanism With Hose & Nozzle , Confirming To Is:15683. (Abc Dry Chemical Powder- Map 90%) , Signages Providing And Installing In Position The Following Tupe Of Sign Boards Made Out Of 3Mm Thick Opaque Pvc Foam Board With Computer Cut. Pvc Non-Reflective Self Adhesive Vinyle Painted Foam Board, Complete With Mirror Fasteners. Signages With Printed In Case Of Fire, Use Stairs Unless Instructed Otherwise Of 1.5Cm Height Letters In Red With White Back Ground. The Size Of The Board Shall Be 25Cm * 30Cm And Shall Be Fixed At The Height Of 2Mts, From Finished Floor Near Manual Call Points. , Providing And Fixing In Position The Signage Of Incase Of Fire Do Not Use Lift Size 8 X 8 , Providing And Fixing In Position The Signage Of Incase Of Fire Break The Glass To Be Pasted Immediately Above The Every Extinguisher.Size 6 X 6 , Providing And Fixing In Position The Signage Of Fire Extinguisher To Be Pasted Immediately Above The Every Extinguisher.Size 6 X 6 , Providing And Fixing In Position The Signage Of Fire Hydrant & Hose Reel To Be Pasted On Door Of The Every Fire Shaft At All Floors. . Size 6 X 8 , Providing And Fixing In Position The Sign Board Of Assembly Point Complete With 1 Mm Thick Rigid Plastic Board Size Of 600 Mm X 600 Mm To Be Fixed On Ground By Using A Steel Rod / Pipe At Designated. , Providing And Fixing In Position The Signage Of Fire Alarm Panel Size 6 X 6 , Providing And Fixing In Position The Signage Of Exit Signages Glow Type With Battery Backup Size 8 X 16 , Providing And Fixing In Position The Signages Fire Order It Should Contain The Following Matter On 3Mm Thick Opaque Pvc Foam Board Of Computerised Cut, Pvc Non-Reflective Self Adhesive Vinyle Painted Foam Board Of 3 * 4 , Type -I Comprising The Followinga) Alert The Security At Security Room By Actuating Manual Call Point Located At Strategic Locations.B) Evacuate The Occupants By Using Fire Exits And Emergency Exits Only And Assemble At Various Assembly Points.C) If Possible Try To Extinguish The Fire By Using Nearest / Suitable Portable Extinguisher Or Water From Nearest Wet Riser.D) Be Calm And Do Not Give Any Room From Panic, Walk, Do Not Run. E) If You Encounter Serious Difficulty In Evacution, Flat And Try To Attract Attention Of Rescue Team. , Type -Ii Comprising The Following Action By Security / Reception Upon Receipt Of Information Through Fire Alarm Or Fire Detectors Or By Using Public Address System. A) Alert The Occupants By Using Public Address System.B) Inform Fire Control Through Any One Of The Following Phone Numbers: 101, Xxxxxxxxxxxxxxxxxxxxc) Refer Evacution Plan From Evacuating Standard People.D)Guide The Fire Force, On Their Arrival To The Seat Of Fire E) In Case Of The Casualities, Call Ambulance By Dialling Number……………. , Laisoning Works: Laisoning Charges For Works Such As Filling Necessary Applications, Prepration Necessary Drawings And Submitting For Approval With Requestion Form Of Local Fire Force Department, Arranging For Inspection Of Fire Hydrant Installationsand Equipmentsbyfireforce Officers Authority Includiungnecessary Follow - Up Withconcerned Person Uptilloccupation Certifice (Oc) Is Obtained.The Scope Of Work Shall Also Include Depositing The Fees, Other Amounts As And When Required. All The Expense Incurred In Authorities Following - Up In This Regard Shall Be Borne By The Sub - Contrtactor Except For The Payments To Be Made For Only Security Deposit On Pro Rate Basis Etc., Which Will Be Reimbursed On Production Of Original Vouchers. , Lift Works: 2 Stops-Sound Proof 360° Panoramic Glass View Curved Designer Profile No Connector Holes On The Shaft Joints Cylinder Joint Cover - Matching Designer Profile Concealed Hinges With No Projected Visible Metal Cover Invisible Sensors On The Shaft Cabin Colour Matching To Lift Colour Panoramic Frameless Aluminium Door Door Handles Painted To Match Lift Colour Cabin Base Cover Plates Zero Visible Screws On Shaft / Cabin & Doors No Visible Springs On Cabin Basesafety Dual Hcc Brakes (Hardened Cross Compound) Electric Door Lock For Safety Triangle Emergency Alarm Cabin Phone With Gsm Child Safety Switch Cabin Internal Diameter= 1160Mm Height=1930Mm Clear Acess=805Mm Handle=No , Flodable Chair=No Alexa = No Capacity = 240Kg Colour = Cream White Flooring Carpet = Beigelanding Door Floor 0 =F0 Access=Side A Automatic Door Closing Right Hand Side Hinge Floor 1 - F1 Access - Side A Automatic Door Closing Right Hand Side Hinge Shaft External Diameter = 1365Mm Space Requried =1430Mm Color = Cream White Power Reuirementsingle Phase - 230V - 50/60Hz 32Amp With Circuit Breaker Stabilized Power Travel Height From F0 To F1 = 3500Mm Total Travel Height From F0 To F1 = 3500Mm Minimum Headroom Required = 2439Mm

BRR : 8649695 Tender For Construction Of Security Building For Barc (F), Rr Site Via Kota, Rajasthan.; 1 Part-I : Civil WorksSection- A: EarthworkEarth work excavation by mechanical means (Hydraulic excavator) / manual means in all types of soil other than soft and hard rock, dressing the sides of foundation, ramming of bottom etc. including shoring and dewatering (if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick, each layer well rammed and consolidated including disposing the surplus earth within a distance of 200 m all as per specifications including clearing Jungle, uprooting of vegetation, grass, etc. complete andas directed by the Engineer-in-charge. 2 From 0.00 to 1.50 m depth from Average Ground Level 3 Earth work excavation by mechanical means (Hydraulic excavator) / manual means in foundation, in Soft Rockincluding shoring, dewatering if necessary, dressing the sides, ramming the bottom, refilling the sidesetc. with available selected excavated earth in layers of not exceeding 500 mm in depth, each layer well rammed and consolidated disposal of surplus excavated material within a lead of 200 m complete as per specifications and as directed by the Engineer-in-charge. 4 From 0.00 to 1.50 m depth from Average Ground Level 5 Earth work excavation in foundationin Hard Rockby Chiselling and / or by mechanical means (Hydraulic excavator)/ Manual means including dewatering if necessary, dressing the sides, ramming the bottom,and stacking and / or disposing within a distance of 200 m and filling the sides of foundation with available selected excavated earth in layers not exceeding 500 mm in depth, each layer well rammed and consolidated etc.complete all as per specifications and as directed by the Engineer-in-Charge. 6 From 0.00 to 1.50 m depth from Average Ground Level 7 From 1.50 to 3.00 m depthfrom Average Ground Level 8 Earth work excavation in foundation in Hard Rock by controlled Blasting (including explosive,drilling, muffling, pre shear line drilling )and by mechanical means (Hydraulic excavator) / Manual means including dewatering if necessary, dressing the sides of foundation, ramming the bottom of foundation, stacking and / or disposing within a distance of 200 m and filling the sides of foundation with available excavated earth in layers not exceeding 250 mm in depth, each layer well rammed and consolidated etc. complete all as per specifications and as directed by the Engineer-in-Charge. Blasting works to be executedas per safety norms and as per specifications and as directed by the Engineer-in-charge. 9 From 0.00 to 1.50 m depth from Average Ground Level 10 From 1.50 to 3.00 m depthfrom Average Ground Level 11 From 3.00 to 4.50 m depthfrom Average Ground Level 12 From 4.50 to 6.00 m depthfrom Average Ground Level 13 Supplying and stacking good excavated earth available at site , including compaction of earthwork in embankment under optimum moisture conditions to give at least 95% of the maximum dry density ( Proctor density). 14 Cutting and felling trees of girth beyond 30 cm up to and including 60 cm girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable materials complete as per specifications and as directed by the Engineer-in-charge. 15 Lead charges for 1st 1 KM or part thereof, by mechanical transport including loading unloading, stacking / levelling etc. 16 Soil 17 Rock 18 Debris 19 Lead charges for Lead exceeding 1 KM but not exceeding 2 KM, by mechanical transport including loading, unloading, stacking / levelling etc. 20 Soil 21 Rock 22 Debris Note: The rates in respect of Item Nos. 7and 8 are applicable for NET Quantities arrived at after making deduction for voids @ 20% in respect of soil ,@ 50% in respect of Rock and @30% in respect of debrisfrom corresponding STACK / TRUCK Measurement 23 Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313-2001 Part II for preconstructional antitermite treatment and creating a chemical barrier under and alround the masonry pits, masonry foundations, wall trenches, plinth filling, junctions of wall and floor, expansion joints, surfaces of RCC works for a depth of min. 500 mm from the finished ground level, surrounding of pipes, conduits etc., walls retaining soil above floor level, apron and drain along the perimeter of the building including all byeworks complete as per specification / IS 6313:2001 or latest revision and direction of Engineer-In-charge (only ground floor plinth area of the building will be measured for the payment in the following three stages. i) 20% after completion of the foundations ii) 50% after completion of the ground floor flooring iii) 30% after completion ofall treatment works including ground floor doors & windows. Work to be executed by approved agency and specified guarantee for 10 (ten) years shall be furnished by the contractor. 24 SECTION -B: Plain Cement Concrete & Reinforced Cement ConcreteProviding and laying in position cement concrete of 1:4:8 (1 cement, 4 crushed sand, 8 graded stone aggregate of maximum size 20 / 40 mm) with minimum cement content as per the latest revision of the relevant IS code including consolidation, finishing, curing etc. complete as per specifications and drawingsbut excluding the cost of Form work shuttering, centering complete at all levels. 25 Providing and laying in position cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) with minimum cement content as per the latest revision of the relevant IS code including consolidation, finishing, curing etc. complete as per specificationsand drawings but excluding the cost of Form work shuttering, centering Complete at all levels. 26 Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) with minimum cement content as per the latest revision of the relevant IS code including consolidation, finishing, curing etc. complete as per specification and drawingsbut excluding the cost of Formworkshuttering, centering complete at all levels. 27 Providing and fixing at all levels, precast members using cement concrete 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of max. size 20 mm) in copings and / or bed blocks, plain window sills, shelves, louvers, steps, staircases, trench covers, drain covers etc. including hoisting and setting in position with C.M 1:3 (using crushed sand) cost of required centering, shuttering and finishing smooth with 6 mm thick cement plaster 1:3 (using Crushed sand) on exposed surfaces complete as per specifications at all levels. 28 Providng and fixing at and near ground level precast cement concrete 1:2:4 in kerbs, edgings etc. as per approved patterns and setting in position with C.M 1:3 (using crushed sand) including consolidation, curing, cost of required centering, shuttering, finishing smooth with 6 mm thick cement plaster 1:3 (using crushed sand) on exposed surfaces complete as per specifications and as directed by the Engineer-in-charge. 29 Providing and laying in position Reinforced CementConcrete (RCC) of grade M-20 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching,mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.Note : The minimum cement content for RCC works should be as per the latest revision of the relevant IS code. 30 Providing and laying in position Reinforced CementConcrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching,mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.Note : The minimum cement content for RCC works should be as per the latest revision of the relevant IS code. 31 Providing and laying in position Reinforced CementConcrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching,mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications in superstructure up to 20.00m height.Note : The minimum cement content for RCC works should be as per the latest revision of the relevant IS code. 32 EXTRA (over Item nos. 10,11,12,15,16 and 17) forReady Mixed Concrete ofall Grades of RCC / PCC manufactured in Fully Automatic Batching plantproduced inside Project areasas per direction of Engineer-in-chargecomplete as per specifications . 33 Providing and laying in position PLUM Concretewith 70 % cement concrete of 1:3:6 (1 cement, 3 crushed sand, 6 graded stone aggregate of maximum size 20 mm) and 30 % 150 to 230 mm size soling stones spreading uniformlyas per directions of the Engineer-in-Chargeincluding consolidation, finishing, curing etc. complete as per specifications and drawings but excluding the cost of Form work shuttering, centering complete at all levels 34 SECTION -C: Reinforcement Steel, Structural Steel & Formwork Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coatedG.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings.Steel supplied by the contractor. Using TMT bars of specified grades all dia bars. TMT bars to be supplied by the contractor shall conform to IS – 1786(Latest edition) and BARC specification . Note: 1) The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also testing third party from approved laboratories without any extra cost. 2) Binding wire required for the work will have to be supplied by the contractor at their own cost and will not be measured for payment. 3) Cover blocks shall be of same grade of concrete. 35 Providing Structural steel work in M.S Plain Plates and Chequrred Platesfor Embedded Parts, Trench Covers, Connection plates etc.including cutting, hoisting, fixing in position and applying a priming coat of approvedzinc chromate steel primer etc.including cost ofstructural steel Plates, welding all labour charges etc. complete as per drawings and specifications. Usingmaterialsof approvedmanufacturers. All test reports to be provided along with the supply of the materials conforming to IS:2062. 36 Providing Structural steel work using angles, channels, joists and other sections, weldedand / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structuresincludingsupplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawingsand as directed by theEngineer in charge. 37 Up to and including 300 mm Joists, 350 mm channels, and below sections using materials ofapproved manufacturers.(ISI marked) All test reports to be provided along with the supply of the materialsconforming to IS:2062Notes for Item No. 21 & 22.01:1. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. 2. Welding weights, connections, bolts and nuts shall notbe measured for payment but the cost of which shall be deemed to have been included in the rates. 3. Welding Electrodes from approved manufactrers meetinf all the technical specifications (the electrode gives smooth radiographic quality weld with low spatter and smoke) grade only shall be used. 4. Holes to be drilled only by Drilling machines and gas cutting of holes are not permitted. 5. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc. 38 Providing, supplying, cutting, welding, fabricating, hoisting and fixing in position structural steel members like pergolas, trusses, purlins, posts etc. using MS hollow / circular / square / rectangular tubular sections including applying a coat of Zinc chromate primer of approved make all as per specifications as per relevent codes and standards; all as per specifications, drwaings and as dircted by Engineer in Charge.Notes: 1. Yst 310 Conforming to IS 4923:1997 (Reaffirmed in 2009) with yield stregth of 310 N/sq. mm (For all rectangular Box sections Grade of steel to be used.) 2. Structural steel confirming to IS 2062 shall be supplied from approved manufacturers from their own plants rolled from virgin materials to be procured directly or from their authorised dealers and test certificate to be produced. 3. The contractor shall supply documentary evidence of purchase of steel, Test certificate from approved manufacturers and also third party testing from approved laboratories with out any extra cost. 4. Welding weights, connections, bolts and nuts shall notbe measured for payment but the cost of which shall be deemed to have been included in the rates. 5. Welding Electrodes from approved manufactrers meetinf all the technical specifications (the electrode gives smooth radiographic quality weld with low spatter and smoke) grade only shall be used. 6.Holes to be drilled only by Drilling machines. Gas cutting of holes are not permitted . 7. Rate inclusive of all consumables like GAS, welding electrodes and tools and tackles etc. 39 Providing and fixing hand rail of approved sizeby welding etc. to steel ladder railing, balcony railing & staircases railing including applying a priming coat of zinc chromate steel primer etc. complete as per specifications using M.S tubes of ISI marked (Medium) of specified diameter and thickness. 40 Providing and fixing hand rail using304 grade Stainless Steel pipesof approved size and qualityby welding, mirror / matt polishing, fixing at siteetc. forbalcony railing & staircases railing including special sections as per drawings, specifications. complete as directed by the Engineer-in-charge. 41 Providing and fixing 304 grade Stainless Steel pipesof approved size, make and quality by cutting and placing in position including embedding if necessary complete as per specification and as directed by the Engineer in charge. 42 Providing and fixing in position 50 mm thick Thermocoleboard heavy density minimum 18.00 Kg/ CuM weight wrapped in 200 micron thickness Polythene sheets and placingin machine foundation workscomplete as per specifications and drawings andas directed by the Engineer incharge. 43 Providing and fixing at all levels MS bolts including nuts and washers of approved size, quality and makeas per requirements, drawingscomplete all as directed at site by the Engineer in charge 44 Providing and fixing at all levels SS bolts including nuts and washers of approved size, quality and make as per requirements and as per specifications, drawingscomplete all as directed at site by the Engineer in charge 45 Providing and fixingfabricated embedded parts/ platesmade 304 grade Stainless Steel pipes/ Plates/ Flanges etc.as perdrawings of approvedmake and qualityby welding,fixing, embedding in concreteat siteetc.as per drawings, specifications complete. Note :A sample to be fabricated and to be got approved by theProject Engineerbefore starting of work at site. This work to be executed through approved specialized agency. 46 Labour charges for Fixing in position in RCC / Masonry/ Form workMild steel or Stainless steel fabricatedEmbedded Parts supplied by the Department including transporting from the departmental stores, aligning, fixing in position, welding, providing necessary supporting arrangements etc. complete all as per drawings and specifications and as directed by the Project Engineer. 47 Weighing Up to 100 kg 48 Weighing Up to 100 kg and inclusive of 1000 Kg 49 Weighingabove 1000 KgNote : M.S. Steel / Reinforcement steel/ jigs & fixtures if required for supporting shall be paid under relevant item. 50 Providing , centering ,shuttering Form work using PVC film facedplywood to get a neat form finish surface for all types of structures including necessary strutting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels 51 For Sub Structure 52 For Super Structure 53 For Circular & curved shuttering In Sub Structure 54 For Circular & curved shuttering In Super structure 55 Providing and fixing double tubular scaffolding system using H- frames with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding. 56 SECTION -D: Masonry works & PlasteringProviding and constructing Half brick masonry using Flyash/ FlyashLime bricks in substructure with minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 using crushed sand including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement. (Reinforcement will be paid under relevant item) 57 Providing and constructing Half brick masonry using Flyash/ FlyashLime brickswith minimum 70 kg / Sq.cm strength of approved make and size in partition walls in C.M 1:4 (using crushed sand) including scaffolding, raking out joints, curing etc. complete and with stiffners of RCC 1:2:4 (105 X 75 mm size) at every 900 mm height including form work curing etc. complete as per specifications but excluding reinforcement in Super Structure at all levels. (Reinforcement will be paid under relevant item) 58 Providing and constructing Brickwork in cement mortar 1:6using crushed sand withFlyash / FlyashLime brickswith minimum 70 kg / Sq. cm strength of approved make and size in Sub structure including, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings. 59 Providing and constructing Brickwork in cement mortar1:6 using crushed sand withFlyash/ FlyashLime bricks with minimum 70 kg/ sq.cm strength of approved make and size in super structure at all levelsincluding, scaffolding, raking out joints, curing, cleaning complete all as per specifications and drawings. 60 Providing and constructing Random Rubble masonry using approved Rubble stone in foundation and plinth in C.M 1:6(using crushed sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. completeas per drawings and specifications. 61 Providing and constructing Random Rubble masonry using approved Rubble stone in super structure (above plinth) at all levels in C.M 1:6(using crushed sand) including raking out joints or simultaneous flush pointing above ground level / plinth leveland upto20m height including scaffolding, curing etc. complete as per drawings and specifications. 62 Labour charges for constructing Random Rubble masonry using Rubble Stone available at site in foundation and plinth in C.M 1:6(using crushed sand) including cost of bond stones, raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. completeas per drawings and specifications. 63 Labour charges for constructing Random Rubble masonry using Rubble Stones available at site in super structureupto 20m height at all levels in C.M 1:6(using crushed sand) including cost of bond stones, raking out joints or simultaneous flush pointing , curing etc. completeas per drawings and specifications. 64 Forming of grooves of uniform size from 12 mm X 12 mm to 25 mm X 15 mm in plastered surfaces as per approved pattern using wooden batterns, nailed to the under layer including removal of wooden batterns, repair to the edges of plaster panels and finishing the groove complete as per specifications and as per the direction of Engineer-in-charge 65 Providing 15mm thick plastering using Ready mix internal plastering compound of approved make for internalfaces of brickwork / concrete surfaces including preparation of the surface, curing, cleaning, scaffolding completeall as per specifications and as directed at site by the Engineer-in-charge 66 Providing20 mm thick plastering using Ready mixexternal plastering compound ofapproved make for externalfaces of brickwork / concrete surfaces including preparation of the surface, curing, cleaningscaffoldingat all heights complete, all as per specifications including forming drip moulds wherever necessary and as directed by the Engineer-in-charge 67 Providing and fixingG.I. chicken mesh in the junctions of concrete & brick work / masonry or as directed by the Engineer in charge including cutting, fixing with nails in position before plasteringcomplete all as directed by the Engineer-in-charge. (Only area of the chicken mesh used alone will be measured) 68 SECTION -E: Flooringworks Providing and layingminimum 25 mm thickuniform shade Kotah stone flooring over 20 mm thick (Avearge) base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing in minimum three levels to obtainmirror polish complete with base cement mortar 1:4 (using crushed sand) all as per specifications, patterns and drawings complete. 69 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm ) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 70 Providing and LayingMinimum 25 mm thickuniform shade Kotah stonetreads and risers of steps, skirting,window sills in single length up to 2.00 metres length slabdado and pillars laid on 12 mm thick (average) cement mortar 1:3 (using crushed sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing to obtain mirror finishcomplete as per specifications, drawings and as directed by the Engineer-in-charge 71 Extra (over Item No. 48) for nosing in steps of treads Using Kotah stone 72 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 of approved make, shade andcolour of size ranging from300 - 600 mm long and 300 mm - 600 mm wide and thickness not less than 6 mmas approved byEngineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints withmatching colour Tile grout of approved make of matching shade including using PVC tile trim in the exposed corners, complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. 73 Providing and fixing 1st quality ceramic glazed floor tiles of minimum 300 - 600 mm long and300 - 600 mm wide andthickness not less than 6 mm conforming to IS 15622 of approved make in all colours and shades as approved byEngineer-in-charge over a bed of 20 mm thick bed of cement mortar 1:4 (using crushed sand) and jointing with grey cement slurry including pointing with white cement based Tile grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Enginner-in-charge 74 Providing and fixing Glazed VITRIFIED floor tiles of approved make of size above 600x 600mm and up to and including900 x 900mm conforming to IS 15622 inall colours and shades in Glossy or Matt or satin finishlaid over a bed of minimum20 mm thick bed of cement mortar 1:4 (using Crushed sand) and jointing with grey cement slurry including grouting with the joints withwhite cement based Tile Grout of approved make and matching shade complete as per patterns, drawings and specifications complete as directed by the Engineer-in-charge 75 Providing and Fixing3.00 mm thick Homogeneous PVC sheet / tile in flooring and skirting of approved make or approved equivalent meeting all the technical specifications as per relevant codes and standards in approvedpattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer meeting all the technical specifications as per relevant codes and standards including leveling small undulations with plaster of paris if required, rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge in approved colour and shade. 76 Supplying, stacking and laying of 230mm thickrubble soling stones as under floor baseincluding packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, murum etc. complete all as per specifications and as directed by the Engineer-in-charge. 77 Murum fillingunder floors of specifiedthickness in layers ofnot more than 150 mm thickness including supplying required materials andconsolidation etc. complete (Murum to be brought from outside campus ofRR Site). 78 Providing, supplying and laying pre polished granite slab flooring / dado / Wall claddingof approved blackshade, colour and texture withnot less than15-17mm thick graniteslabsover20 mmthick base cement mortar 1:4 (using crushed sand) laid and placedwith grey cement slurry includingfilling the joints with matching whitecement basedtile groutcomplete all as per specifications and drawings. 79 Providing, supplying and laying pre polished granite slab flooring / dado / Wall claddingof approved shade other than black, colour and texture withnot less than 15-17mm thick graniteslabsover20 mmthick base cement mortar 1:4 (using crushed sand) laid and placedwith grey cement slurry includingfilling the joints with matching whitecement basedtile groutcomplete all as per specifications and drawings. 80 Providing and fixing 1st qualitydigital highlighter300 x 450 mm- wall tiles meeting all the technical specifications as per relevant codes and standardsas and as approved byEngineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints withmatching colour Tile grout compound meeting all the technical specifications as per relevant codes and standards of matching shade complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. 81 Providing and fixing 1st qualityDigital highlighter 300 x 600mm- wall tiles meeting all the technical specifications as per relevant codes and standards and as approved byEngineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (using crushed sand), setting the tiles in cement slurry and pointing the joints withmatching colour Tile grout compound meeting all the technical specifications as per relevant codes and standards of matching shade complete as per drawings, patterns and specifications complete as directed by the Engineer-in-charge. 82 Providing and fixing minimum 15-17 mm thick gang saw cut mirror polished (pre-moulded and pre-polished) machine cut Granitefor kitchen platforms, vanitiy counters, wash basin counters, door frames, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (using crushed sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing the edges to give high gloss finish etc. complete at all levels. 83 Extra (over Item No. 60) for providing edge moulding to Minimum 15 mmthick Granite Slab counters, Vanitis etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge. 84 Section- F:Doors, Windows, Glazing & False Ceiling works Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make or approved equivalent meeting all the technical specifications as per relevant codes and standards conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealent etc. (fittings glazing and panelling shall be paid for separately)Notes: 1) The rates for aluminium is inclusive of all fastners required for fabrication and fixing in the walls. 2) All joints shall be of mittered Joints 3) A long M.S rod threaded at both ends to be provided in all aluminium door shutters in Top & bottom Horizontal members internally connecting Vertical members and fixed with M.S washers & nuts. 4) Only Aluminium members alone shall be measured and paid for. 5)Detailed fabrication drawings to be prepared and got approved by Project Engineer. 85 Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) 86 Extra over above item for providing Colour Anodizing / Dyed anodizing Aluminium sections of approved colour with matching colour fittings. 87 Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item). 88 Withclear float glass panes of 6.00 mm thickness 89 Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc. with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-inCharge. 90 With tinted toughened floatglass panes of 6.00 mm thickness 91 With frostedglass panes of 6.00 mm thickness 92 Providing and fixingapproved quality stain less steel body roller wheelsfor slidingshutters 93 Providing and fixing approved quality and shape star locks cum handle for sliding shutters 94 Design, fabrication, supply and installation of frameless clear, toughened float glass of specified thickness for fixed glazing and openable panels (doors) with crystal edge polish and necessary patch fittingsfor swing doors, hunged on floor spring, , S.S.handles and locking arrangement and clear toughened float glass fixed for fins and all joints sealed with weather silicone sealent and fixed portion glass from top sides and bottom with anodised (minimumthickness 25 microns) Aluminium C channels (25 mm X 25 mm X 1.5mm thick)and all glass to glass joints sealed with clear thick weather silicone sealent and making the required grooves in plaster/concrete for fixing channels etc and making good the same with sealent/plaster of paris etc. complete all as per approved shop drawings, specifications and as directed by Engineer-in-charge. Note: Shop drawings to be prepared by the contractor as per the site conditions and the same shall be submitted for approval of Project Engineer before procurement. 95 Frameless fixed panels using 12mm thick clear toughened float glass including making cutouts, finishing the edges sealents etc complete. Glass area alone shall be measured and paid (necessary patch fittings shall be paid under relevant Item) 96 Frameless openable panels (swing doors) using 12mm thick for door leaves including making cut outs/ holes, finishing the edges with crystal edge polish ,sealents etc complete. Glass area alone shall be measured and paid (necessary patch fittings, locks & floor springs shall be paid under relevant Item) 97 Providing, supplying and fixingTop & bottom patch fittings with covers to suit floor springs & free pivots . 98 Providing, supplying fixing of Over panelpatch fittings withbacking plate and pivots 99 Providing, supplying fixingofhigh light to side light / corner link patch fittings with covers to suit floor springs & free pivots . 100 Providing, supplying fixingof connectinglink patch fittingsfor two or four glass 101 Providing, supplying fixingof Floor Spring with spindle insert closing force EN3, EN4,EN6with stainless steel satin finish cover plate complete including makingcut outs on floor & finishing the same complete. 102 Providing, supplying fixingofUniversal Centre lock with strike Plate 103 Providing, supplying fixingof corner lock with strike plate 104 Providing, supplying fixingofwall to glassconnectingpatch fittingsforfixed glass 105 Providing, supplying and fixing back to back Stainless steel Handle of 720 mm long 106 Providing and Fixing in position Suspended false ceiling system using 600 x 600mm Calcium Silicate Ceiling tiles having 15mm densified edges and 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC and approved surface design and edge profileplaced in a suspended grid of size of 600 x 600mm made of hot-dipped G.I steel sections having an exposed surface capping of pre-finished baked polyester painted coil wherein the main tee of size 24mm x 38mm x 0.33mm shall be suspended at 1200 mm centers along the length of ceilingwith 4mm dia G.I wire with necessary level adjusters and cross tees of size 24 x 28 x 0.33mm x 1200 mm shall be inserted in to slots between the main tees at 600mm centersand thereafter in directionvertical to the longer tees, cross tees of size 24 x 28 x 0.33mm x 600mmshall be inserted to form a grid size of 600 x 600 mm resting on the periphery walls on wall angles of size 20mm x 20mm x 3000 mm x 0.40 mm thickness.The rate shall include providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings. The work shall be carried out as per directions of Engineer-in-charge.The main teesto besuspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanized spring steel leveling clips. the entire grid system shall be designed to bear a distributed load of minimum 15 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment). 107 False Ceiling- tiles- Cosmos / Spintone / Hexa / Quadra Models with micro look system. 108 Providing and fixing in position suspended false ceiling system using 12 mm thick calcium silicate boards of100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KCplaced in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sectionswherein the ceiling sections of 0.55 mm thickshall be suspended at 1200 mm centres along the length of ceilingwith 4mm dia G.I wires/ 1 mm thick strip hangers made ofG.I sheet sections with necessary level adjusters andinter channelsof 0.90mm thick with connecting clips andresting on the perifery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge.The main teesto besuspended from the ceiling/ soffit with the help of metal dash fastners of 6mmx50mm, soffit clits of 25mmx35mmx1.60mm and 4mm dia G.I wire with galvanised spring steel levelling clips/G.I strip Hangers at 600mm centers . the entire grid system shall be designed to bear a distributed load of minimum 25 kg/Sq.m (Only calcium silicate false ceiling area will be measured for the purpose of payment)Notes: For Item Nos. 68 & 69 - (1) The mode of measurement shall be actual area of False ceiling and no deduction will be made for light fittings and diffusers. (2) Quoted Rate shall also includes: i) Anchor Fasteners for Drop rods.ii)Providing additional GI channel/angle/or any other suitable section for fixing of vertical member at junction of level difference in false ceilingwherever required.(3)Contractor has to submit shop drawing for the system for approval of Engineer-in-charge before proceeding with the work. (4)Work should be carried out as per manufacturers specifications andonly through approved executor/applicator and in co-ordination with the agency of HVAC /Mechanical/Electrical work and no extra will be paid for the same. (5)False ceiling workin any area should be commenced only after clearance from departmental representatitive is sought in writing for completion of HVAC ducting work. No additional claim, whatsoever, will be entertained by the Department in this regard. 109 Providing and fixing of Hollow metal fire rated (2 hr fire rating) Single leaf / double leaf doors of specified size as per IS 3614 part-1 & part-2 for stability and integrity. Pressed Galvanized steel confirming to IS 277 with the following specification. Recommended fire door shall have doors tested at CBRI or ARAI for maximum rating of 2hrs with vision panel. Test certificates shouldbe available for vision lites /panels as part of the fire door assembly. Independent glasstest certificates will not be accepted. Manufacturer test certificate shall cover doors both single and double leaf and all doors supplied should be within the tested specimen, deviation in specification and sheet thickness other than what is mentioned in the test certificates are not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved manufacturer of approved equivalent quality.Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge) minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the striking jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. Door shutters shall be ofG.I sheet 18 gauge thick with necessary stiffners. Thickness of the door shutter shall be as per design or minimum 40 mm). All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour. The door leaf and frame shall have passed minimum 250 hours of salt spray test. 110 Extrafor providing and fixingfurniture fittings for Hollow metaldoors / Hollow metal fire door, completeas per specifications and as directed by Engineer-In-Charge. 111 304 Grade stainless steelBall bearing hinges of size 100x75x3mmor as directed by by Engineer-In-Charge withrequired screws etc. 112 Door Closer with standard arm, includingrequired screws etc. 113 Dead Lock with both side Key Cylinder 114 SS Pull - H- Type handle- 32mm Dia & 600 mm Long 115 Fire rated Clear Glass- 200mmx 300mm 116 Providing and fixing single point lock cum handle foraluminium openable windows / top hung shuttersof approved quality complete all as per specifications and as directed by the Engineer-in-charge. 117 Providing and fixing locks for aluminiumsliding window shutterswith(Over all size of 204mm x 23 mm) of approved type all as per specifications complete as directed by the Engineer-in-charge. 118 Providing wood work in frames of doors, windows, clear story openings and other frames, wrought framed and fixed in position of required size and shape including sawing, jointing,making rebates for shutters,making grooves as shown in the drawings, finishing the surfaces to the required finish all as per specifications and drawings including necessary MS hold fasts 40 mm X 3 mm thick, 200 mm long / with coach screws including protective painting to the suface that will come in contact with walls, joining materials, labour etc. complete all as per specifications and as directed by the Engineer-in-charge. 119 Second class teak wood 120 Providing and fixingFRPdoor shuttersflush door / panelled type with plain colour or wooden veneer finish of approvedquality,design & colour made out of 1.5 mm thick FRP skin moulded over wooden frame work of 40 mm wide and required thickness wooden styles and minimum100 mm wide lock rails and wooden blocks for door stoppers, tower bolts, baby latch, aldrop, handles etc. wherever required and core filled with Polyurethane Foamand fixing with 4 Nos 100 mm (ISI marked) stainless steel hinges with S.S. wood screws 121 35 mm thick panelleddoor type of approved coloursincluding the cost of 100 mm ISI marked heavy quality stainless steel butt hinges with necessary screws. 122 Providing, supplying and fixing hollow metal flush steel doors frame & shutter 40 mm thick consisting of door frame and shutters and all hardware fittings, frame of 143mmx57mm sizemade out of 1.60mm thick G.I sheets and shutters made of 1.20mmthick sheets, hollow portion filled with Honey Comb Craft paper including necessary stiffners in shutters and frame, vision panel of specified size withglass as specified. provision for fixing required hardwares, frame hollow portion filled with PCC 1:2:4, necessary hold fast embedded in concrete / fixing in concrete with anchor fastners. finished with Polyurethane painting of approved colour complete all as per drawings and specifications and as directed by the Engineer-in-charge (Hardwares & vision panels will be measured under relevant Item). 123 Single Door shutter with Frame 124 Providing and fixing anodised aluminium tower bolts of size 250 X 12 mm ISI marked transparent or dyed to required colour or shade with necessary screws etc. 125 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. in wooden doors / steel doors with necessary bolts & nuts complete as per specifications and as directed by the Engineer-in-charge. 126 Providing and placing in position suitable PVC water stops conforming to IS 12200for construction / expansion joints between two RCC Members and fixed to the reinforcement with binding wire before pouring concrete etc. complete as per specifications and as directed by the Engineer-in-charge 127 150 mm wide water stopper 128 Providing cement based water proofing treatment to the new terraces, chajjas, cleaning the concrete surfaces, giving injections to the top slab as required with cement and approved waterproofing compound solution to fill up all inherient holes, voids, honeycombs etc. in the concrete slab, setting brickbat coba in waterprrof mortar with necessary gradient for easy flow of water and continue the treatment along the inner faces of parapet or other adjoining wall up to a height of 300 mm in the shape of vattas, with waterproof plaster finished smooth with trovel in cement / geru with false markings of 300 mm squares complete as directed by the Engineer-in-charge 129 With Average thickness of 120 mm and minimum thickness atkhurra as 65 mm using river sand / crushed sand. 130 Average 65 mm thick for chajjas using river sand / crushed sand 131 Extra over 120 mm thick cement based water proofing for providing and laying brick bat cobain roof(i) Laying brick bats with mortar using broken brick bats 25 mm to 115 mm size with 50% of cement mortar 1:4 (using crushed sand) admixed with proprietary water proofing compound as per manufacturers specifications conforming to relevant ISand approved by Engineer-in-charge over 20 mm thick layer of C.M 1:4 (using crushed sand) to required slope complete as directed by the Engineer-in-charge.(Measurement will be over and above the average thickness of 120 mm only). 132 Providing and laying water proofing treatment in sunken portions of WCs, bath rooms etc. by appying cement slurry mixed with water proofing cement compound consisting of applying: (a) 1st layer of slurry of cement @ 0.488 kg / sq.m mixed with water proofing cement compound @ 0.253 kg per sq.m.including injecting cemnt slurry .This layer will be allowed to air cure for 4 hours. (b) 2nd layer of slurry of cement @ 0.242 kg / sq.m mixed with water proofing cement compound @ 0.126 kg / sq.m. This layer will be allowed to air cure for 4 hours followed with water curing for48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with cement slurry. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (using crushed sand) admixed with proprietary water proofing compound conforming to relevant IS and approved by Engineer-in-charge including mixingfibre at the rate of 125 grams per 50 kg of cement in top layer of plaster and finally finishing the surface with trowel with neat cement slury in bottom and all the sides of sunken portion, complete as directed by the Enginer-in-charge. The treatment to be tested for water tightness before filling the sunken areas. 133 Providing, painting and finishing walls with two coats of exterior emulsion painton sand face plaster /plain plaster & concrete of required shade over new work including base coat of water proofing cement paint, preparation of the surfaces, scaffolding complete as per specifications and as directed by the Engineer-in-charge. 134 Providing and applying wall painting two coats on new work with premium plastic emulsion paintto give an even shade, including a coat of approved cement primer, including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge 135 Providing, applying wall painting two coats with Lustur paintto give an even shade over acoat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge 136 Providing and Painting twocoats of synthetic enamel paint on steel surfaces to give an even shade over aprimer coat including preparation of the surfaces, scaffolding completeas per specifications and as directed by the Engineer-in-charge 137 Providing & applyingSynthetic plaster / Textured Coating of approved quality with finishes of minimum 2 mm thickness based on synthetic fibre & chemicals having acid, alkalies, fire & fungus resistance properties of approved shade on plastered surface/ concrete surface at all levels in the same pattern of facia blocks with grooves, bands for different offsets in different colours as per approved sample including required cost of Steel Double scaffolding.The item shall include applyingapproved equivalent quality synthetic plaster with one base coat by trowelling followed by 3 coats of finished paint by brush supplied by same manufacturer, providing decorative finish as required including preperation of plastered surface to receive approved equivalent quality plaster, cleaning the surface including cost of scaffolding and cost of all materials, labour etc. complete as per manufacturers specifications and as directed by Engineer. 138 Providing and paintingTWO coats of synthetic enamel paint on new wooden surfacesof required colour to give an even shade over an under coat of suitable shadeprimerof approved brand and manufacturer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge 139 Providing and painting walls with (TWOcoats) of approved shade of high build protective , elastomeric water proofexterior gradepaint of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturers specifications including preparation of the surfaces by scrapping / wire brush , scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2and 2 coats of finishing coat without water all as directed byEngineer-in-charge. 140 Providing and applying white cement based wall puttyover concrete or Plastered surfaceup to 3 mm thickto get uniform surface free from undulationincluding cleaning complete all as directed by the Engineer-in-charge 141 Providing and Painting with Epoxy PU paintusing 2 coats of (120 Micron dry film thickness) Epoxy PU high build coating as finishing coat over a priming coat of 50 micron thickness over steel surfaces at all locations prepared and applied as per manufacturer specifications including preparation of surface by cleaning with wire brush and rubbing, scraping , applying sand paper , making free of Rust, dust, dirt etc. filling the holes, joint, cracks if any using epoxy putty complete. all as per manufacturers technical data and as directed at site to achieve minimum overall dry Film thickness of 170 micron (50 Micron primer Coat + 120 micron finishing Coat) on steel surfaces 142 Dismantlingplain cement concretemanually / by mechanical meanscarefully without damaging adjacent structures including disposal of debris within 200 m lead as per direction of Engineer-in-charge. 143 Dismantling of RCC works carefullymanually without damaging adjacent structures excluding cutting of reinforcementincluding stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge. 144 Extra(over Item No. 93)for cutting of reinforcement in RCC, stacking the same and returning the steel scrap to the departmental stores all as per direction of Engineer-in-charge. 145 Dismantling of RCC works includingCuttingand stacking of steel reinforcement bars and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge. 146 Demolishing C.C / R.C.C works by mechanical means and stock piling at designated locations carefully with out damaging adjacent structures and disposal of dismantled materials up to a lead of 100 m, stacking serviceable and unservicable materials separately including cutting reinforcement bars all as directed at site. 147 Dismantling brick work in Cement mortar carefully without damaging adjacent structures including stacking of materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge. 148 Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge. 149 Dismantling doors, windows and clear storey openings (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows)of area 3.00 Sq.M and below. 150 Dismantling doors, windows and clear storey windows (steel / wood) shutter including chowkhats, architraves, holdfasts etc. complete and stacking within 100 m lead (full windows)of area beyond 3.00 Sq.M 151 Taking out doors, windows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) of area 3.00 Sq.M and below. 152 Taking out doors, windlows and clear storey openings (steel / wood) shutter including stacking within 100 m lead (only shutters) of area beyond 3.00 Sq.M 153 Dismantling steel work in single sections including dismantling and stacking within 100 m leadIn R.S Joists,Angles etc. 154 Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismantling and stacking within 100 m lead. 155 SECTION-G: Internal& External Water SupplyProviding and fixing to the inlet mouth of rain water pipe cast iron dome grating 15 cm diameter and weighing not less than 440 grams. 156 Providing,laying , jointing, fixing and testing heavy quality(ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cmhydraulic pressurewith a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes withISI markedC -Class heavy quality pipes. 157 15 mm dia G.I pipe 158 20 mm dia G.I pipe 159 25 mm dia G.I pipe 160 32 mm dia G.I pipe 161 40 mm dia GI pipe 162 50 mm dia GI pipe 163 Providing & fixing in position heavy pattern screw down gun metal gate valve with handles and wheels of approved make or approved equivalent meeting all the technical specifications as per relevant codes and standards including testing for 10Kg/cm2 pressure with clean and potable water with a minimum testing duration of two hours etc.as per specification and as directed by the Engineer-in-charge. 164 15 mm n.b. 165 20 mm n.b. 166 25 mm n.b. 167 32 mm n.b. 168 40 mm n.b. 169 50 mm n.b 170 Providing and fixing 50 mm dia brass ball cock of heavy quality of following sizes with arm rod and Plastic Ball floats completeas per specifications and as directed by the ProjectEngineer. 171 Providing and fixing 15 mm dia C.P brass bib cock of heavy qualityas directed by the Engineer-in-charge. 172 Providing and fixing 15 mm n.b. C.P Brass open stop cock of Heavy Quality as directed by the Engineer-in-charge 173 Providing and fixing 15 mm n.b. C.P brass concealed stop cock of Heavy Qualityas directed by the Engineer-in-charge. 174 Providing and fixing 15 mm n.b. C.P brass Angle cock of heavy qualityfor wash basin inlet / flush cistern etc. as per specifications and as directed by the Engineer-in-charge. 175 Providing and Fixing 15 mm CP brass Angle stop cock - quarter Turn as per specifications and as directed by the Engineer-in-charge. 176 Providing and fixingCP brass / copper inlet connection pipes heavy quality suitable for hot and cold including CP brass unions and nuts 15 mm dia 600 mm long. 177 Providing and fixing 15 mm C.P brass pillarcock of heavy Quality and as directed by the Engineer-in-charge. 178 Providing and fixing heavy quality health faucetwith 1.50 metres long flexible hose (handshower) with wall brackets and type as per specifications and as directed by the Engineer-in-charge 179 Providing and fixing heavy quality 15 mm urinal flush cock as per specifications and as directed by the Engineer-in-charge. 180 Section- H: Drainage & Sanitary AppliancesProviding and fixing square mouth S.W. gully trap P type of 150 x 100 mm sizecomplete with CI grating brick masonry chamber with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.5 kg and frame to be not less than 2.70 kg as per standard design 181 Providing and laying non pressure NP2 class RCC Hume pipeswith collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete 182 100 mm Dia RCC Hume pipe class NP2 183 150 mm Dia RCC Hume pipe class NP2 184 250 mm Dia RCC Hume pipe class NP2 185 300mm Dia RCC Hume pipe class NP2 186 Providing and constructioning Inspection chambers of Internal size clear dimension of 900 x 600 mm in 230mm thick brick masonry with cement mortat 1:4over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement, brick corbelling at top to provide opening of 900 X 450 mm, embedding the frame and cover with CC 1:2:4 concrete, and fixing cast iron steps if necessary at 300mm intervals complete . Depth of chamber not exceeding 900 mm. (excavation, soling, cast iron cover and C.I steps will be paid separately under relevant item) 187 Extra depth over initial depth of 900 mm for chambers of 900 x 600 mm internal size.including fixing cast iron steps (C.I steps shall be paid under relevant item) 188 Supplying and fixing Cast IronMan hole or Cast Iron Steps, cover, grating ofweight as specified in the drawings or as directed by the Engineer in charge. 189 Providing and fixing Chlorinated PVC (CPVC) pipes having thermal stability for hot & cold water supply (as ASTM Standard 2846 & SDR - 11 Grade) including all CPVC Plain & Brass threaded fittings, fixing the pipe with clamps including chasing the walls, concealing the pipes and making good the same etc. This includeds jointing of pipes & fittings with CPVC Solvent cement & testing the joints complete all as per specifications, drawings and as directed by the Project Engineer 190 25 mm outer dia CPVC pipe (External) / open 191 32 mm outer dia CPVC pipe (External) / open 192 40 mm outer dia CPVC pipe (External) / open 193 50 mm outer dia CPVC pipe (External) / open 194 Providing and fixing PVC rain water pipes conforming to relevant IS type B and PVC SWR fittings & specialsconforming to relevant IS code including jointing with seal ring / with PVC solvent adhesive including fixing in walls usingclampsetc completeall as per drawings, specifications and as directed by the Engineer-in-charge 195 SWR PIPE 110 mm O/D 196 Providing, supplying, fixing in position, under floors or in walls centrifugally cast iron pipes including required specials like bends, tees, Y collars, cowl etc for soil, waste and ventilation pipes conforming to IS:3989 or Cast iron hubless pipes conforming to IS: 15905 of approved quality including cost of jointing with spun yarn and molten lead / drip seal of specified quantity, caulking the joints, including testing of pipes, painting with primer, fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site. 197 75 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 0.90 kg lead / joint or Cast iron hubless pipes as per IS : 15905 198 100 mm dia centrifugally cast (spun) iron socketed pipe as per IS:3989 using 1.00 kglead / joint or Cast iron hubless pipes as per IS : 15905 199 Providing, supplying, fixing in position in walls Rain water down take pipes usingCentrifugally cast iron pipes (3.00 metres long) including required specials like bends, shoes etc forRain water down takepipes Conforming to IS.3989 or Cast iron hubless pipes conforming to IS: 15905 including cost of Jointing with spun yarn and molten lead of specified quantity, caulking the joints, including testing of pipes,painting with primer , fixing at walls with necessary approved type of clamps and brackets complete all as per drawings and specifications and as directed at site. 200 100 mm C.I rain water down take pipe with 1.00 kg lead / joint conforming to IS:3989 /Cast iron hubless pipes conforming to IS: 15905 201 150 mm C.I . rainwaterdown take pipe with 1.20 Kg lead / joint conforming to IS:3989 /Cast iron hubless pipes conforming to IS: 15905 202 Providing and fixing Lead Sheet Flashing of about 450 mm x 450 mm size made out of 1.5 mm thick lead sheets including forming to required shape, dressing, fixing to mouth of rain water pipes with necessary bitumen, cement mortar, providing C.I. grating etc. complete as per specification for rain water downtakes of size upto 150mm n.b. 203 Providing and fixing cast iron nahani trap / floor trap of 100 mm inlet and 75 mm outlet, (weighing 5.80 Kg each), jointing with lead with the connection pipes, placing as per the drawings, embedding in cement concrete 1:2: 4 and making circular hole up to floor level using 110 mm O/D PVC pipes of 6 Kg / sq.cm pressure and fixing 1 No 125 mm dia C. P brass grating ,complete all as specifications and drawings and as directed by the Engineer-in-charge 204 Providing and fixing heavy quality stainless steel / C.P brass grating as specified for floor traps / nahani traps all as directed by the Engineer-in-charge 205 SS Grating 125 mm dia 206 Providing and fixing 150X 150 mmcast irongrating of required shapefor rain water down takes at roof includingchipping andgroutingcomplete all as directed by the Engineer-in-charge . 207 Providing and constructing storm waterchambers of Internal size clear dimension of 900mm x 600 mm in 230 thick brick masonry with cement mortat 1:4over a bed of 150 mm thick 1:4:8 cement concrete foundation, plastering with cement mortar 1:4 20 mm thick on inside, out side and all exposed sufaces finished with a floating coat of neat cement,embedding theC.I frame and cover / RCC precast slab by making suitable rebate in concrete and fixing cast iron steps if necessary at 300 mm intervals complete as directed by the Engineer-in-charge. Depth of chamber not exceeding 900 mm. (Excavation, soling, cast iron cover, C.I steps and precast slabwill be paid separately under relevant item) 208 Providing and fixing Wall Mounted EWCWhite Colour with P or S Trapwith solid seat and lid , 32 mm diaFlush Valve ,Flush bend , fixing EWC with C.P Brass screws, 15 mm PVC heavy quality inlet connection of 600 mm long, including fixing with a pair of 12 X 120 mm SS Rack Bolt, testing , commissioning & cleaning etc.complete all as per drawings and specifications and as directed by Engineer-In-Chargeat site. 209 Providing and fixing white vitreous china flat back single half stall urinal size 580 x 380 x350 mm / 610 mm with 32mm C.P flush value including standard flush pipe and C.P. brass spreaders, 32mm urinal waste coupling with dome grating and clamp etc. including making G.I water line connection complete as directed by the Engineer-in-charge (Only G.I. pipes will be paid under relevant Item )Note: For fixing flush valve 32 mm G.I water line provision to be made which will be paid under relevant Item . 210 Providing and fixing vitreous China wash basin with C.I. brackets, 15 m C.P. brass pillar tap,15 mm x 600mm longPVC Inlet connection,32 mm heavy quality C.P. brass waste couplingof standard pattern, including painting of fittings and brackets, cutting and making good the walls and testing complete all as per specifications and as directed by the Engineer-in-charge. 211 White vitreous China counter top/counter below wash basin size 560*410 mm/560*450 mm with single 15 mm C.P. brass pillar tap (OVAL/ROUND Models ) 212 Providing and fixing PVC low level / high levelflushing cistern 10 litre capacityin white colour with flush pipewith manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures etc. complete as per specifications and as directed by the Engineer-in-charge. 213 Providing and fixing 25 mm Dia G.I. inlet connection for flush pipe connecting with W.C. pan fromhigh level flushing cistern 214 Providing and fixing Heavy quality32 mm dia flexible PVC (semi-rigid) waste pipefor sink or wash basin including PVC waste fittings etc. complete all asper specifications and as directed by the Engineer-in-charge 215 Providing and fixing 6 mm thick mirrors of size600 x 450 mm with bevelled edges complete with 6 mm thickasbestos sheet back ground fixed to wallswith C.P. brass screws and concealedwashers complete. all as per specifications and as directed by the Engineer-in-charge . 216 Extra (over Item No. 138) for providing and fixingmirrors with - stainless steel 304 grade STUDS (with wall spacers)complete all as per specifications and as directed by the Enginner-in-charge 217 Providing and fixing stainless steeltoilet paper holderrecessed typewithS.S screws as directed by the Engineer-in-charge complete. 218 Providing and fixing 150 X150 mm soap dishofwhite viterious Chinaware,includingchasing walls making good the same after fixing the China Soap dishetc. complete all as per specifications and as directed by the Engineer-in-charge. 219 Providing and fixing heavy qualityC.P. brass waste coupling of 32 mm dia for wash basin and sink,Half threaded or Full threadedas directed by the Engineer-in-charge complete. 220 Providing and fixingheavy qualityCP brassbottle trap 31 / 32 mm ,single piece moulded with height of 270mm, effective length of tail pipe 260 mm from the centre of the waste coupling 77 mm breadth with 25 mm minimum water seal for wash basins / urinal etc all as per specifications and directed by the Engineer in charge. 221 Providing and fixing C.P brass towel rail600 mm long complete fixed to walls with 30 mm CP brass screws with concealed fitting arrangement all as directed by the Engineer-in-charge. 222 Providing and fixing 15 mm C.P brass tube 600 mm long with nuts andwashers complete for wash basins / urinals with all necessary acessories completeas directed by the Engineer-in-charge. 223 Providing and fixing 15 mm PVC inlet connection suitable for hot and cold water 600 mm long with nuts andwashers complete for wash basins/ Urinals etc. with all necessary acessories completeas directed by the Engineer-in-charge. 224 Providing, supplying and fixing JET spray with 1.00 metre long flexible tube connection in European / Anglo Indian closet under seat cover fixtures complete all as specified and as directed by the Engineer-in-charge. 225 Providing, hoisting and installing at required elevation moulded HDPE cylindrical vertical water storage tanks of 4000 litre capacitywith WHITE SILICON coated and with suitable S. M. Ccover at top including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow, providing and fixing necessary G.I nipples ranging from 15 mm to 50 nn n.b of average150 mm length with double check nuts, washers etc. complete as directed by the Engineer-in-charge. 226 Section-I: Miscellaneous WorksProviding and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade madewith strong vibratory compaction and approved size, shape, design laid in required colour and pattern over and including 50 mm thick compacted bed of crushed sand, filling the joints with crushed sand etc. all complete as -per the direction of the Engineer-in-charge. 227 Clearing Jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50 m / outside the periphery of the area cleared as per specifications and as directed by the Engineer-in-charge. 228 Providing and Fixing Anchor Fastner including drilling in concrete as per requirementfor fixing EPs or other structuresallas specified by the manufacturer complete all as per specifications and drawings. 229 16 mm diameter 75 mm Long 230 16 mm diameter 100 mm Long 231 16 mm diameter 150 mm Long 232 16 mm diameter 200 mm Long 233 20 mm diameter 100 mm Long 234 Providing and fixing Mechanical Splicing using threaded coupler of all types to the reinforcement bars of specified diameter and grade using high yield strength standard couplers of specially produced steel to join ribbed bearing bars machine cut end to end. Cost to include necessary supply of threaded couplers of various diametres , transportation, coupling at site by mechanical means , erection at site, testing of random samples, testing at site, protection of threaded ends using PVC covers, threading of rebars etc. complete. Cost to include necessary testing of joints ( 0.5% of the total joints) at site for tensile strength and as required by Engineer-in- Charge.Cost quoted shall include all materials and labour. 235 16 mm dia 236 20 mm dia 237 25 mm dia 238 Providing and fixing stainless steel urinal grab bar/wash basin Grab bar (confirming to grade SS 304, satin finish) consisting of 38 mm dia. 18 SWG stainless steel pipe duly bended in required shape and size, hinged with 3mm thick stainless steel rectangular sheet of required size having 6 nos. holes and u shaped stainless steel clamp for holding the grab bar including cutting, bending welding grinding, polishing and fixing with suitable sized and nos. of dash fasteners complete as required. All bends to be neatly finished miter joints complete etc. as required. 239 Labour charges for dry stone pitching 22.5 cm thick by using good soling stones available at site, preparing the surface complete. 240 Part-II : Mechanical Works Split AC units : Supply, installation, testing & commissioning of split AC of followingnominal capacity and accessoriesas per tender specifications 241 2TR 242 1.5TR 243 1TR 244 Copper pipe with insulation :Supply and installation of Copper pipe with insulation suitable for following capacity split ACmachine (quantity for single run ) 245 2TR 246 1.5TR/1TR 247 Drain pipe: Supply and installation of5/8 inch dia PVC Braided flexible pipe withinsulation as per tender specification. 248 Casing capping : Supply and installation of PVC casing-capping of following cross sectional size as tender specification. Location : for AC pipe and drain 249 150mm x 50mm 250 100mm x 50mm 251 Electric cable:Supply and installation of Electrical wiring/cables of three/four core x 2.5 mm² (or as per split AC requirement foritem no 155) 252 Exhaust fan: SITC of propeller type exhaust fans with louvers offollowing sweep dia ( approx.) along with all accessories and fixture as per tender specifications. 253 200mm 254 300mm 255 Part-III : Electrical Works Lighting Distribution Board as per TSS1 256 Power Distribution Board as per TSS2 257 10way VTPN DB with 160A Incomer as per TSS3 258 8way VTPN DB with 63A Incomer as per TSS4 259 4C 25sqmm Al conductor XLPE cable as per TSS 5 260 20 Pair Telephone cable as per TSS6 261 Optical fibre cable as per TSS7 262 4pair instrument cable TSS8 263 End Termination of 4C 25sqmm Cable as per TSS9 264 End terminations of 20Pair Telephone as per TSS10 265 End terminations of Instrument cable as per TSS11 266 Point Wiring for below points as per TSS12 267 Primary Power Points (16A+6A) 268 Secondary Power Points 269 Primary Lighting Points 270 Secondary Lighting Points 271 Highbay Primary Lighting Points 272 Highbay Secondary Lighting Points Secondary 273 Terrace lighting Primary points 274 Terrace Secondary lighting points 275 Primary Security Lighting Points 276 Secondary Security Lighting Points 277 Primary Ceiling Fan Pointswith switch and regulator 278 Secondary Ceiling Fan Points with switch and regulator 279 Primary Exhaust Fan power Points 280 Secondary Exhaust Fan power Points with switch and socket 281 Split AC Power Points 282 Primary FA/PA Points 283 Secondary FA/PA points 284 Point wiring for call station point 285 Network combo points 286 LED Recess type Lighting Fixtures as perTSS13 287 LED square type surface Lighting Fixture as per TSS14 288 LED Lighting Fixture Highbay type as per TSS15 289 Outdoor Security LED Lighting Fixture as per TSS16 290 LED Terrace Lighting Fixture as per TSS17 291 LED Flood Lighting Fixture as per TSS18 292 LED Batten Lighting Fixtures as per TSS19 293 42U Mounting Rack with accessories as per TSS20 294 15U Mounting Rack with accessories as per TSS21 295 24 Port rack mount LIU with splicing of OFC as per TSS22 296 24 Port Jack Panel as per TSS23 297 3 Feet Patch cord (CAT 6) as per TSS24 298 Earthing Stations as per TSS25 299 Fire Alarm Terminal Box as per TSS26 300 PA Terminal Box as per TSS27 301 Perforated Cable Tray (size 300 mm X 50mm) with accessories as per TSS 28 302 Cu Earthing wire 8 SWG as per TSS 29 303 Air Terminal as per TSS 30 304 Test Link with Enclosure as per TSS31 305 MS fabrication item as per TSS32 306 MS Powder coated item as per TSS33 307 Self Illuminated signage as per TSS34 308 GI Sleeve as per TSS35 309 GI 25 X 6 mm Earthing strip as per TSS36

BRR : 3373124 Tender For Maintenance Of Panampilly Nagar Office Complex- Guest House-1 Guest House Civil Works 2 15.2.2 : Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In-Charge.Nominal Concrete 1:4:8 Leaner Mix ( Including Equivalent Design Mix ) 3 15.23.1 : Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead.For Thickness Of Tiles 10 Mm To 25 Mm 4 15.56 : Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 5 13.7.1 : 12 Mm Cement Plaster Finished With A Floating Coat Of Neat Cement Of Mix:1:3 ( 1 Cement : 3 Fine Sand ) 6 15.12.1 : Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead:Of Area 3 Sq. Metres And Below 7 15.12.2 : Of Area Beyond 3 Sq. Metres 8 13.18 : Neat Cement Punning 9 4.2.2 : Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor, Etc. Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing:1:11 / 2:3 ( 1 Cement : 11 / 2 Coarse Sand :3 Graded Stone Aggregate 20 Mm Nominal Size ) 10 22.5 : Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : A ) First Layer Of Slurry Of Cement @ 0.488 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. B ) Second Layer Of Slurry Of Cement @ 0.242 Kg / Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg / Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. 11 6.40 : Providing And Laying Gypsum Panel Partitions 100 Mm Thick With Water Proof Gypsum Panels Of Size 666X500x100 Mm, Made Of Calcite Phosphor Gypsum Fixed With Tongue And Groove, Jointed With Bonding Plaster As Per Manufacturers Specifications In Superstructure Above Plinth Level Up To Floor V Level. Gypsum Blocks Will Have A Minimum Compressive Strength Of 9.3 Kg / Cm2 12 6.41 : Extra For Gypsum Panel Partitions In Superstructure Above Floor V Level For Every Four Floors Or Part Thereof. 13 13.60.1 : Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade:Two Or More Coats On New Work 14 13.99.1 : Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade :One Or More Coats On Old Work 15 13.26 : Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 16 21.1.1.1 : Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is : 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminnium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) :For Fixed Portionanodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is : 1868, Minimum Anodic Coating Of Grade Ac 15 ) 17 21.1.2.1 : For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) Anodised Aluminium ( Anodised Transparent Or Dyed To Required Shade According To Is : 1868, Minimum Anodic Coating Of Grade Ac 15 ) 18 9.100.1 : Providing And Fixing Aluminium Handles, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete:125 Mm 19 21.3.2 : Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer - In -Charge. ( Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item ) :With Float Glass Panes Of 5.50 Mm Thickness 20 11.48.2 : Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix 0.70 Kg Of Organic Coated Filler Of Desired Shade ( 0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg ) . Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge.Size Of Tile 600X600 Mm 21 11.49.2 : Providing And Laying Vitrified Tiles In Floor With Different Sizes ( Thickness To Be Specified By The Manufacturer ) , With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive ( Water Based ) Conforming To Is : 15477, In Average 6 Mm Thickness, Including Grouting Of Joints ( Payment For Grouting Of Joints To Be Made Separately ) .Size Of Tiles 600X600 Mm 22 11.50 : Deduct For Not Grouting The Joints With White Cement And Matching Pigment In The Items Of Fixing Of Vitrified Tiles 23 8.31 : Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineerin-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 24 9.1.1 : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length ( Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately ) .Second Class Teak Wood 25 9.53 : Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embeddings In Cement Concrete Block 30X10x15 Cm 1:3:6 Mix ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) 26 Od271499 / 2023_2024 : Providing And Fixing Single Shutter Doors Of Engineered Wood For Opening Size Of 1000 Mm *2100 Mm Hinged Type Openable On One Side. The Door Shutter Shall Be Of 40 Mm Thickness ( Min ) With Perimeter Seal And Core Filling With Tubular Particle Board And Polished Veneer On Both Sides As Per Design / Shade As Selected. The Door Jambs Shall Be Of 125*45 ( Min ) . Architrave Shall Be Of 65*12 Mm And Shall Vary In Line With The Site Conditions. The Architrave Material Provided Shall Be Of Lvl ( Laminated Veneer Lumber ) . Rate Includes Fixing The Door Accessories. 27 9.23 : Extra For Providing Lipping With 2Nd Class Teak Wood Battens 25 Mm Minimum Depth On All Edges Of Flush Door Shutters ( Over All Area Of Door Shutter To Be Measured ) . 28 Od271508 / 2023_2024 : Providing And Fixing Cup Board Shutters 18 Mm Thick, With Multi Wood Is: 12823 Marked, Exterior Grade ( Grade I Type Ii ) , Having One Side Decorative Lamination And Other Side Balancing, Including Iind Class Teak Wood Lipping Of 25 Mm Wide X12 Mm Thick With Necessary Screws And Bright Finished Stainless Steel Piano Hinges. It Also Includes Magnetic Catcher And Aluminum Handles And And Locking Arrangements Complete As Per Direction Of The Engineer -In-Charge. 29 9.82 : Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete. 30 9.92.1 : Providingand Fixing Chromium Plated Brass Handles With Necessary Screws Etc. Complete:125 Mm 31 Od3774 / 2022_2023 : Providing And Fixing Mosqito Net ( Steel ) For Windows And Doors Including Aluminum Sectionand All Fittings With Locking Arragement Approved By The Site Enginneer In Charge ( No Extra Cost Paid On This Account ) . 32 12.45.3 : Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms / Sqm ( Both Side Inclusive ) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37 Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall / Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25 Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5X25 Mm At 230 Mm C / C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound, Jointing Tapes, Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per ManufacturerS Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With:12.5 Mm Thick Tapered Edge Gypsum Moisture Resistant Board 33 Od271634 / 2023_2024 : Providing And Fixing Of Podium Stand Made Up Of Hard Wood Of Size 120*60*40. It Includes One Drawer With Open Compartment And Complete As Per The Direction Of Engineer In Charge 34 10.25.1 : Item Shifted To Head 14 As Item 14.74Steel Work Welded In Built Up Sections / Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete 35 Toilet Andbathroom Fittings 36 9.117.2 : Providing And Fixing Factory Made Upvc Door Frame Made Of Upvc Extruded Sections Having An Overall Dimension As Below ( Tolerance ±1 Mm ) , With Wall Thickness 2.0Mm ( ±0.2 Mm ) , Corners Of The Door Frame To Be Jointed With Galvanized Brackets And Stainless Steel Screws, Joints Mitred And Plastic Welded. The Hinge Side Vertical Of The Frames Reinforced By Galvanized M.S. Tube Of Size19 X 19 Mm And 1 Mm ( ± 0.1 Mm ) Wall Thickness And 3 Nos. Stainless Steel Hinges Fixed To The Frame Complete As Per ManufacturerS Specification And Direction Of Engineer-In-Chargeextruded Section Profile Size 42X50 Mm 37 9.118.2 : Providing And Fixing To Existing Door Frames30 Mm Thick Factory Made Polyvinyl Chloride ( Pvc ) Door Shutter Made Of Styles And Rails Of A Upvc Hollow Section Of Size 60X30 Mm And Wall Thickness 2 Mm ( ± 0.2 Mm ) , With Inbuilt Decorative Moulding Edging On One Side.The Styles And Rails Mitred And Joint At The Corners By Means Of M.S. Galvanised / Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0 Mm And Stainless Steel Screws.The Styles Of The Shutter Reinforced By Inserting Galvanised M.S. Tube Of Size 25X20 Mm And 1 Mm ( ± 0.1 Mm ) Wall Thickness. The Lock Rail Made Up Of H Section, A Upvc Hollow Section Of Size 100X30 Mm And 2 Mm ( ± 0.2 Mm ) Wall Thickness Fixed To The Shutter Styles By Means Of Plastic / Galvanised M.S. U Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 620 Mm, Having Over All Thickness Of 20 Mm And 1 Mm ( ± 0.1 Mm ) Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places By Inserting Horizontally 6 Mm Galvanised M.S. Rod And Fastened With Nuts And Washers, Complete As Per ManufacturerS Specification And Direction Of Engineer-In-Charge. 38 17.81 : Providing And Fixing Floor Mounted, White Vitreous China Single Piece, Double Traps Syphonic Water Closet Of Approved Brand / Make, Shape, Size And Pattern Including Integrated White Vitreous China Cistern Of Capacity 10 Litres With Dual Flushing System, Including All Fittings And Fixtures With Seat Cover, Cistern Fittings, Nuts, Bolts And Gasket Etc Including Making Connection With The Existing P / S Trap, Complete In All Respect As Per Directions Of Engineer-In-Charge. 39 17.28.2.1 : Flexible Pipe32 Mm Dia 40 17.29 : Providing And Fixing 100 Mm Sand Cast Iron Grating For Gully Trap. 41 17.7.2 : Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630 X 450 Mm With A Single 15 Mm C.P. Brass Pillar Tap 42 18.15.1 : Providing And Fixing Brass Bib Cock Of Approved Quality :15 Mm Nominal Bore 43 18.8.2 : Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings I / C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes& Fittings, With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer-In-Charge.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.20 Mm Nominal Outer Dia Pipes 44 50.18.9.9.1 : Providing And Fixing Pvc Pipes Includings Jointing Of Pipes With One Step Pvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.110 Mm Dia 6Kgf / Cm2 45 50.18.9.22.1 : Providing And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110 Mm Dia Elbow 46 50.18.9.22.11 : Providing And Fixing Pvc Moulded Fittings / Accessories For Rigid Pvc Pipes, Including Jointing With Pvc Solvent Cement - 110 Mm Dia Socket / Coupling 47 18.22.2 : Providing And Fixing C.P. Brass Shower Rose With 15 Or 20 Mm Inlet:150 Mm Diameter 48 18.53.1 : Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is: 893115 Mm Nominal Bore 49 18.21.1.1 : Providing And Fixing Uplasticised Pvc Connectionpipe With Brass Unions:30 Cm Length15 Mm Nominal Bore 50 50.17.1.5 : Supplying And Fixing Cp Health Faucet Superior Quality ( Jagur Or Equvalent Make ) Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 51 50.17.1.1 : Supplying And Fixing Stainless Steel Soap Dish Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 52 50.17.1.2 : Supplying And Fixing Cp Towel Rod 45Cm Or Nearest Available Length Including Cost Of Materials And Labour Charges Etc Complete As Per The Direction Of Site Engineer-In-Charge. 53 50.9.15.2 : Supplying And Fixing 300 Mm Aluminium Aldrop 54 9.97.1 : Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per : 1868 ) , Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Complete:300X10 Mm 55 Electrical Works 56 Od275734 / 2023_2024 : Supply, Conveyance Installation Testing And Commissioning Complete With All Accessories And Lamps Etc. Directly On Wall Or Ceiling With Pvc Round Block Neatly Painted To Suit The Fitting And Giving Connection With Required Length Of 16 / 0.20 Mm 3 Core Copper Conductor Flex Wire Conforming To Relevant Iss And Giving Connections As Required.<Br>1200 Mm 1 X 20 W Led Tube With Fittings 57 1.33 : Supplying And Fixing 3 Pin, 5 Amp Ceiling Rose On The Existing Junction Box / Wooden Block Including Connection Etc As Required. 58 Od273270 / 2023_2024 : Supply, Installation, Testing And Commissioning Of Following Split Type High Wall Mounted Air Conditioner Unit With Cordless Remote Of Following Ratings Including Fixing Of Indoor & Outdoor Units, Initial Gas Charging As Per Manufacturer Standards, Giving Power Connection To Nearest Power Plug Point / Mcs, Connecting Indoor And Outdoor Units Using Hard Drawn Copper Refrigerant Pipes Insulated With Nitrile Rubber Or Equivalent Material Of Minimum 3 Mtrs, Pvc Insulated Flexible Copper Cable Of Minimum 3 Meters As Per Original Manufacturers Standards, Necessary Drain Water Line Using 20Mm Pvc Pipe Minimum 3 Mtrs. Necessary Opening On Wall Shall Be Made For Drawing Refrigerant / Power / Drain Lines And Shall Be Restored To Normal Using Cement Plastering. ( Drain Pipe Line Shall Be Properly Fixed And Clamped To Line And Level As Per The Direction Of Site Engineer In Charge ) . Approved Ot Equivalent Make Of 1.5Tr Twin Coil Capacity 5 Star Rated Air Conditioner Working On Single Phase 240 V, 50 Hz + / -1% Ac Supply With Approved Make External Stabilizer.<Br> 59 90.4.5.2 : Supply, Conveyance, Installation, Testing And Commissioning Of Ceiling Fans Of The Following Sizesusing Standard Accessories Excluding Resistance Type Regulator, Wiring The Down Rod With 16 / 0.20Mm Pvc Insulated And Pvc Sheathed 650 / 1100V Grade 3 Core Round Copper Conductor Flex Wire Or With Extended Original Wiring Etc. As Required. 60 Od273417 / 2023_2024 : Supply Of 18W Surface Recess Mounted Led Downlighter, High Efficiencyluminaire Wattage 18W. The Luminaire Should Have A Cri > 80. Driver Of The Luminaire Shall Have Thd < 10% And Pf > 0.9. Robust Driver With Wide Voltage Range 100-240 Volts And Inbuilt Protection. Aesthetically Designed Led Light Fixture Of 6000 K, Of Surface Mounting Which Provides Soft-Light And Glare Free Symmetrical Illumination. ( Make:Havells, Phillips, Wipro ) 61 Od273467 / 2023_2024 : Supply Of 9W Led Downlighter With A Nominal System Lumen Output Of Minimum 500 Lumens. System Wattage Should Not Exceed 9W. The Luminaire Shall Have A Rated System Lifetime Of 50, 000 Burning Hours. The Luminaire Should Have A Color Temperature Of 6000K And Cri>80. Driver Of The Luminaire Shall Have Thd < 10% And Pf > 0.95. Housing Shall Be Crca Powder Coated With Pmma Diffuser. Driver Shall Have 85% Efficiency. Similar To Wipro Make Ld80-530-Xxx-60-Xx*** Or Equivalent<Br> 62 Od273470 / 2023_2024 : Supply Of Mirror Light, High Efficiency With A Nominal System Lumen Output Of 900 Lumens. Luminaire Wattage Should Not Exceed 9W. The Luminaire Should Have A Cri > 80. Driver Of The Luminaire Shall Have Thd < 10% And Pf > 0.9. Slim Led Batten In Aluminium Housing And Decorative End Caps. Robust Driver With Wide Voltage Range 100-240 Volts And Inbuilt Protection. Aesthetically Designed Mirror Led Light Fixture Of 2700 K, Of Surface Mounting Which Provides Soft-Light And Glare Free Symmetrical Illumination. Simialr To Model Number D531027 Garnet 10W Of Wipro Make Or Equivalent.<Br> 63 1.10.2 : Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required.Group B 64 1.24.1 : Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.5 / 6 Amps Switch 65 1.24.3 : Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.15 / 16 Amp Switch 66 1.24.4 : Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.3 Pin 5 / 6 Amp Socket Outlet 67 1.24.5 : Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.6 Pin 15 / 16 Amp Socket Outlet 68 1.27.1 : Supplying And Fixing Following Size / Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.1 Or 2 Module ( 75Mmx75mm ) 69 1.27.2 : Supplying And Fixing Following Size / Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc As Required.3 Module ( 100Mmx75mm ) 70 1.14.1 : Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2x1.5 Sq.Mm + 1X1.5 Sq.Mm Earth Wire 71 1.14.2 : Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2x 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 72 1.14.3 : Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire 73 1.17.3 : Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.3 X 1.5 Sq.Mm 74 1.21.1 : Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.20 Mm 75 1.21.2 : Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface / Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required.25 Mm 76 2.7.6 : Supplying And Fixing Following Way Prewired Sp&N Mcb Distribution Board Of Steel Sheet For 240 Volts On Surface / Recess Complete With Loose Wire Box, Terminal Connectors For All Incoming And Outgoing Circuits, Duly Prewired With Suitable Size Fr Pvc Insulated Copper Conductor Up To Terminal Blocks, Tinned Copper Bus Bar, Neutral Link, Earth Bar, Din Bar, Detachable Gland Plate, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) 2+12 Way, Double Door 77 1.24.8 : Supplying And Fixing Following Modular Switch / Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required.Bell Push 78 2.12.1 : Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 79 2.14.2 : Supplying And Fixing Following Rating, Double Pole, ( Single Phase And Neutral ) , 240 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.40 Amps 80 2.10.1 : Supplying And Fixing 5 Amps To 32 Amps Rating, 240 / 415 Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole 81 1.25 : Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 82 1.38 : Supplying And Fixing Call Bell / Buzzer Suitable For Single Phase, 230 Volts, Complete As Required. 83 90.4.8 : Charges For Cutting Holes Suitable For Accommodating Exhaust Fans Up To 305Mm Sweep Including Plastering Colour Washing Etc. As Required. 84 Od279204 / 2023_2024 : Supply, Conveyance, Installation, Testing And Commissioning Of The Following Sizes Of Exhaust Fans In The Existing Opening, Fixing Necessary Bolt And Nuts, Making Good The Damages Etc. As Required Including Giving Connections With Required Length Of 24 / 0.20Mm Pvc Insulated And Pvc<Br>Sheathed 3 Core Round Copper Conductor Flex Wire , Conforming To Relevant Iss.150 / 155 Mm, Single<Br>Phase Pvc Type Light Duty Exhaust Fan With Shutters<Br> 85 Od279297 / 2023_2024 : Supply, Installation, Testing And Commissioning ( Sitc ) Of Instant Water Geyser Of Capacity-3Ltr, Product Warranty-Min 2 Yrs, Heating Element Warranty-Min 2 Yrs, Tank Capacity-Min 5 Yrs Including Piping Accessories, Pressure Rating-Min 6.5 Bar, Stainless Steel Tank, Water Flow Rate-120 Ltr / Hr, Heating Element-Copper, Isi Certified ( Make:V-Guard, Crompton, Havells Or Equivalent ) As Per The Direction Of Engineer In Charge. 86 Od286554 / 2023_2024 : Supply, Installation, Testing And Commissioning Of Hisense 44L, Single Door, Compact, Direct Cool Single 1 Star , Temperature Control, Metal Body , 201Kwh / Year , Ac 220-240, 50 Hz, Size 51*47*43.9, Weight 14 Kg, Warranty 1 Year On Refridgerator And 10 Years On Compressor From Hisense Refridgerator ( Silver, Rr60d4asb1 ) Or Equivalent As Per The Direction Of Engineer Incharge. 87 Od286663 / 2023_2024 : Supply , Installing , Testing, Commissioning Of Water Purifier-6 L Capacity Ro+Uf, Power-40-50 Wauto Shutoff And Overflow Protection, Filteration Capacity 8L / Hr , Fiter Life6000 Ltr Purifying Technology, Power -230 V , 50 Hz , 20V Make :Eureka Forbes Sure Delight Nxt 6 Or Equivalent, As Per The Direction Of Engineer In Charge. 88 1.56 : Supplying And Fixing Suitable Size Gl Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providng And Fixing 2 Nos. 3 Pin 5 / 6 A Modular Socket Outlets And 2 Nos. 5 / 6 A Modular Switches, Connection Etc. As Required. ( For Light Plugs To Be Used In Non Residential Buildings ) . 89 1.57 : Supplying & Fixing Suitable Size Gl Box Wih Modular Plate And Cover In Front On Surface Or In Recess Including Providing And Fixing 25 A Modular Socket Outlet And 25 A Modular Sp Mcb, C Curve Including Connections, Painting Etc. As Required. 90 1.59 : Dismantling Of Ceiling Fan And Painting The Same With With One Or More Coats Of Spray Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade, Including Cleaning Of Surface With Detergent And Replacing The Damaged Rubber Reel, Nuts And Bolts With Washers And Safety Pins Reinstalling The Same As Required. 91 Od276779 / 2023_2024 : Supply And Fixing Of Fire Retardent / Extinguishing Electric Insulated Synthetic Mat Of Standard Size Minimum 2 Mm Thick For 3.3Kv Grade As Directed By Engineer In Charge 92 Dismantling Works 93 Od274140 / 2023_2024 : Charges For Dismantling Existing Wiring Of Light / Fan / Bell / Points Without Switch Boards Such As Pvc Conduits, Wire, Earthing Conductor, Circuit Mains, Etc Without Damages And The Samestocked At Electrical;L Store Room Near The Site.& Collected Hand Receipt 94 Od280539 / 2023_2024 : Charges For Dismantling Existing Ceiling / Wall / Exhaust Fan And Fittings Of All Sizeswith All Accessories Without Damages And Stocked At Electrical Store Room Near The Site & Collected Hand Receipt As Per Direction Of The Engineer Incharge. 95 Od274214 / 2023_2024 : Charges For Dismantling Of Existing Pre-Wired Ordinary 40 W Flurecent Tube Light Fittings Made Of .5Mm Thick Crca Sheet Accessories And Lamps ( Tube Set And Accessories Excluding Ball& Down Rod ) With Out Damage And Stocked At Electrical Store In Consultation With Ae / Aee Electrical Kshb , Also The Same Recorded In Handing Over Register As Per Direction From Kshb Engineer In Charge 96 Od274705 / 2023_2024 : Charges For Dismantling Existing Ac With Stabilizer, Stat, Copper Pipe Etc Without Damages And The Samestocked At Electrical & Collected Hand Receipt Store Room Near The Site.<Br> 97 Od274723 / 2023_2024 : Charges For Dismantling Existing Angle / Ceiling / Wall Light Fittings With All Accessories Without Damages And Stocked At Electrical Store Room Near The Site & Collected Hand Receipt<Br> 98 Conference Hall ( Rt-Eklm ) 99 Od273576 / 2023_2024 : Supply, Installation, Testing And Commissioning Of Usb Ptz Full Hd Video Conferencing Camera , Full Hd Video Conferencing Camera - 10X Optical Zoom As Per Direction Of Engineer In Charge. ( Makea&T Klick U1 Sb Ptz Or Equivalent 100 Od273577 / 2023_2024 : Supply, Installation, Testing And Commissioning Of Floor Mount Trolley Stand 65, 75 - Custom<Br>Floor Mount Trolley Stand Size 65, 75 As Per Direction Of Engineer In Charge 101 Od273578 / 2023_2024 : Supply, Installation, Testing And Commissioning Of Interactive Flat Panel Display Features Enhanced , Wi-Fi 6, Broad Compatibility, 65W Powered Usb Type-C, High Quality Sound System, Antimicrobial, Surface Secure, User Profiles, Android 11 Active Screen Size ( Inch ) : 65, Display Backlight : Led, Resolution : 3840 X 2160 ( 4K ) , Lcd Brightness : 400 Cd / M2, Life Time : >50000 Hrs, Touch Surface Material :Toughened Tempered Glass, Touch Surface Technology : Anti-Glare Glass , Touch Surface Hardness : H7, Touch Points : 20 Points, Touch Screen, Response Time : 6Ms, Viewing Angle : 178°, Android Version: 11, Ram : 4Gb, Rom : 64 Gb, Speaker Max. Power Output : 15 W X 2 Speakers Including Accessories : Wall Mount Kit, Remote, Hdmi, Power & Usb Cables. Warranty : 3 Years Onsite Warranty + 2Yr Amc ( Make: Newline Or Equivalent. ) .<Br>Including, <Br>Ups - 1Kva Ups With Inbuilt Battery, <Br>Ups Cabinet - Wall Mount Metal Cabinet For 1 Kva Ups, <Br>Floor Mount Trolly Stand - Heavy Duty, <Br>Wireless Mouse & Keyboard As Per Direction Of Engineer In Charge 102 Od275030 / 2023_2024 : Supply, Ofwi Fi Modem Supported In To The Existing Land Linetelephone System Standard Make & Model ( D Link Dsl -2750 U Or Equivalent Model ) As Per Direction Of Engineer In Charge 103 Od275081 / 2023_2024 : Supply, Installation, Testing And Commissioning Of Portable Usb & Bluetooth Conference Phone , “Plug-And-Play” Connectivity With Driver-Less Usb, Bluetooth, Nfc And Audio In / Out Connection Interfaces As Per Direction Of Engineer In Charge ( Make:Yamaha Yvc-330 High-Performance Unidirectional Microphones Or Equivalent ) 104 1.53.1 : Supplying And Drawn Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required1 Run Of Cable

BRR : 9494796 Tender For Work Of Strengthening/Beautification In Office Premises. - civil work 2 MASONRY WORKS 3 150mm thick Block wall 4 Providing and Fixing of Pantry Cabinate Boxes made up of 30mm thick marble stone as partition and 18mm thick granite to be fixed for base of 15mm nano Stone type tile on it to make it 35mm as counter base. 5 REBARING (SLAB EXTENSION) 6 Providing and fixing of pantry overhead cabinate made up of century sainik Mr grade plywood 18mm with shutter and auto hinges of approved make as per design and drawing 7 Floor Screeding Works 8 Providing & Laying plain cement concrete 50 -60 mm thick , as required in 1:3:6 (1 Cement: 3 Coarse Sand : 6 Aggregate)with coarse sand, laid to required thickness not exceeding 50mm and slopes as marked in drawings in floor screenings laid in panels not exceeding 4 Sq.M. , consolidated finished fare and cured complete in all respect. or floor repairing if required on site. 9 Dismantling 10 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 11 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead 12 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 13 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : 14 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 15 RCC cast in SITU 16 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement.1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 17 FINISHINGWORKS 18 Cement Plaster 19 Providing plastering in CM 1:4 12mm thick for walls including finishing to line and plumb for walls. 20 Cement Plaster 21 18 mm cement plaster in two coats under layer 12 mm thick cement plaster1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cementplaster 1:6 (1 cement : 6 fine sand). 22 Gypsum Plastering 23 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/block/ RCC work on walls & ceiling at all floors and locations, finished insmooth line and level etc. complete. 24 Water Proofing 25 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. 26 SANITARY FIXTURES & FITTINGS 27 EWC 28 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete 29 URINAL 30 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mmwith white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe,spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I.trap with outlet grating and other couplings in C.P. brass, including painting of fittings andcutting and making good the walls and floors wherever required Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 31 Wash Basin 32 Supply and fixing of wall mounted basin of approved make and model, CP waste coupling, inlet connection, 15mm NB angle type stop cock with approved make and CP wall cap etc complete as per specification and drawing details. 33 Supply and fixing pillar cock for wash basin with aerators of approved make 34 Health faucet 35 Supply and fixing ofCP health faucet along with braided tube and hanging hook etc as per approved make 36 Tissue paper holder 37 Supply and fixing of toilet paper holder with flap as per approved make. 38 Soap dispenser 39 Supply and fixing of toilet paper holder with flap as per approved make. 40 Floor trap 41 Supply and fixing of uPVC floor trap with stainless steel (SS) grating as per approved make. 42 C.P. Brass fittings 43 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore 44 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore 45 Providing and fixing C.P. brass angle valve for basin mixer and geyserpoints of approved quality conforming to IS:8931 46 MISCELLANEOUS WORKS 47 CINDER FILLING 48 Providing and filling lightweight cinder as specified in the drawings or as instructed by the Project Manager. The cinder material shall be approved by the Project Manager and shall be in the proportion of 1:15 (1 cement 15 cinder). Including cost of 50mm thick cement mortar of 1:2:4 The material shall be placed in layers of 150 mm and shall compacted to ensure dense filling with no voids. 49 GRANITE COUNTER 50 Providing and fixing 18 mm thick gang saw cut, mirror polished,Granite stone slab of colour black, Cherry/Ruby red premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing of edges to give high gloss finish etc. complete at all levels. 51 Interior work 52 PARTITIONS & ASSOCIATED WORKS 53 100mm thick Full height partition (From FFL till True ceiling soffit) 54 Providing and fixing partition upto ceiling height consisting of G.I. frameand required board, including providing and fixing of frame work madeof special section power pressed/ roll form G.I. sheet with zinc coating of120 gms/sqm(both side inclusive), consisting of floor and ceiling channel50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixedto the floor and ceiling at the spacing of 610 mm centre to centre withdash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, includingfixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the framework with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to beprovided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete. 75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks) 55 12mm thick MDF PANELING 56 Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick conforming to IS:14587 57 Gypsum panelling 58 Providing and fixing12.5mm thick gypsum board panelling with GI studs of size 48mm x 34mm x 36mm x 0.55mm thick section , at spacing not exceeding 600mm bothways (horizontal and vertical), fixed onto the floor and ceiling channels. The GI C-channels of size 50mm x 32mm x 32mm x 0.55mm thick to be fixed on the floor and ceiling to hold GI studs. Boards to be joint & finished so as to have flush look including fillingfinishing edges with jointing compound paper tape/cloth gauze. All exposed edges / Corners to be provided with proprietary Angle bead /edge bead sections/corner guard as per Architects instruction. Note: All necessary accessories and consumables to be of approved make and as per manufacturers specification. 59 Skirting 60 Providing and fixing 18mm thickskirting with Pre-laminated (one side decorative and other side balancing lamination) flat pressed 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete : 61 FLOORING 62 Carpet Flooring 63 Providing & fixing approved carpet floor - 600mm x 600mm Imported Loop pile patterned carpet .Make INTERFACE / SHAW or Equivalent.base rate-rs.120/sq.ft 64 STONE FLOORING 65 Italian stone Flooring 66 Providing and laying machine cut, mirror polished, Italian Marble stone flooring laid in required pattern in linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointingwith white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified andas directed by the Engineer-in-Charge.With 18-20 mm thick Indian Stone and joint to be filled with white cement slurry mixed with pigment to match the shade of stone including exposed edge polishing, complete. 67 Tile Flooring and wall (Toilet) 68 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size 1200mm X 1200mm 69 CEILING 70 2 Ft. x 2 Ft. Grid ceiling 71 Providing and fixing 15 mm thick false ceiling tiles at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge. 72 Item same as 2.1. but with 12mm thick Calcium silicate board instead of normal gypsum board complete with all respect. 73 Gypsum Ceiling 74 Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks). 75 wall panel 76 UV backlit Panel 77 Providing & Fixing uv panelwith 8mm thick ply over wooden base partition. complete as per the instructions of Architect. The panels must have8mm thk ply panel backing fixed with necessary frame work for the strength to support the backlit displayleds fastened at floor and ceiling level. finished in UV panel of approved shade & make. panel to be finished in shade and colourto architects approval, 78 Matt Laquered Panneling with Design Moulding Patterns 79 Providing and fixing of Matt laquered Finish Design Moulding Patterns with fixing ofmade out of base frame of 50mm x 50mm hardwood ( Treated with fire retardant paint and antitermite ), fixed with RCC / Brick slab/wall with s.s dash faster. 12mm bwp ply shall be fixed on it. Wooden planks shall be lined on it with grooves, metal stripps and grain as shown in drg including finsh of polish glossy / matt as per approved architect. The job shall include making vertical faces and cove, light points etc complete. All are included this item as mention in detail drg. (Base Rate of Venner @ 80/- Sqft) 80 Artificial green wall 81 Providing & Fixing artificial green wallwith 8mm thick ply over woode base partition. complete as per the instructions of Architect. The panels must have8mm thk ply panel backing fixed with necessary frame work for the strength to support the backlit displayleds fastened at floor and ceiling level. finished ofpanelsl of approved shade & make. panel to be finished in shade and colourto architects approval, 82 louver 83 Providing & Fixing pvc louvers The panels must be fixed with necessary frame work for the strength to support the backlit displayleds fastened at floor and ceiling level. finished ofpanelsl of approved shade & make. panel to be finished in shade and colourto architects approval, 84 Wallpaper 85 Providing, Fixing / Pasting of Wall Papers on wall as approved design, pattern with prepration of base in smooth finish with manf. adhesives, accesories complete in all reaspects all respect as per drawing/design and details Ref. Drawing (Wall Paper base rate @85/- Sqft) 86 Plain Fabric Panneling on Walls 87 P/F/P Fabric Panelling on side wall with 8mm Mdf with Hard wood Freaming ( If required) to be fixed on wall to paste fabric on it. All exposed area to be finished with fabric as per sample approvedall respect as per drawing/design and details Ref. Drawing (Fabric base rate @825/- Rmt) (Only Surface Area shall be measured for the payment) 88 rolling blinds 89 Providing & Fixing rolling blinds. These blinds consist of a single piece of fabric or material that smoothly rolls up and down with the help of a simple control mechanism with 45mm aluminium Super Heavy Duty Tube. This also includes a spring assist control for widths over 2400mm where the drop exceeds 1500mm... Material-Polyester Fabrics 90 MODULAR FURNITURE WORKS 91 MD/VC ROOM table 92 Supply and installation of modular table of following sizes and shapes as mentioned below, of approved make, supported on made of minimum of 18 gauge, MS powder coated leg and frame support with heavy duty levelers with race ways tray . The table top shall be made with 25mm thick MDF in approved finish and shade. The edges of the table shall be finished with matching imported rigid 2mm thick PVC lipping to the profile as per the detail drawings. The shade, make of , laminate/rubberwood, metal components and accessories shall be approved by the Architects. There shall be fliptop box as per the design intent to pass the cables below the table top. All the exposed surface of the MS shall be 60 micron thick powder coated frames. Single seater-Linear Fixed Workstation in Laminate finish of size - 1800 x 1550 Wx 750mm highas per the detail drawings. 93 Cabin table 94 Supply and installation of modular table of following sizes and shapes as mentioned below, of approved make, supported on made of minimum of 18 gauge, MS powder coated leg and frame support with heavy duty levelers with race ways tray . The table top shall be made with 25mm thick MDF in approved finish and shade. The edges of the table shall be finished with matching imported rigid 2mm thick PVC lipping to the profile as per the detail drawings. The shade, make of , laminate/rubberwood, metal components and accessories shall be approved by the Architects. There shall be fliptop box as per the design intent to pass the cables below the table top. All the exposed surface of the MS shall be 60 micron thick powder coated frames. Single seater-Linear Fixed Workstation in Laminate finish of size - 900 x 550 Wx 750mm highas per the detail drawings. 95 MEETING/CONFERENCE ROOM table 96 Supply and installation of modular table of following sizes and shapes as mentioned below, of approved make, supported on made of minimum of 18 gauge, MS powder coated leg and frame support with heavy duty levelers with race ways tray . The table top shall be made with 25mm thick MDF in approved finish and shade. The edges of the table shall be finished with matching imported rigid 2mm thick PVC lipping to the profile as per the detail drawings. The shade, make of , laminate/rubberwood, metal components and accessories shall be approved by the Architects. There shall be fliptop box as per the design intent to pass the cables below the table top. All the exposed surface of the MS shall be 60 micron thick powder coated frames. 97 Full height storage 98 Providing & fixing Storagecabinets made out of 19mm commercial board /prelaminatedboard duly GLASS shutter with 1.0mm laminatein facia and balancing laminate all inside adjustable laminated shelves,50X12mm veneered finish band alaround,100mm high skirting. All surfaces having hinges to be made of marine ply necessarily. Rate should be inclusive of necessary Hardware- 140high D shaped Hetitch handle code no.011869, Lock sets, self-closing hinges, spring loaded shutter latch inside, all cabinet hardware to be As/Architects approval. (Depth of Storage :- 500mm) 99 CHAIRS 100 Supply and installation ofChairs as per selection ) as per selection 101 SOFA SETS 102 Providing and installing a high-quality sofa with premium fabric upholstery, featuring a durable wooden frame for structural support. The sofa is designed for comfort and longevity, incorporating Sleepwell foam for superior cushioning and resilience 103 LOGO 104 Providing & Fixing logo of HPDA of size 1200X1200mm as per design & drgs made in acrylic/metal over desired mdf framing including cutting,lighting & making of logo to shape 105 LOGO 106 Providing & Fixing logo of HPDA of size 1200X1200mm as per design & drgs made in acrylic/metal over desired mdf framing including cutting,lighting & making of logo to shape. 107 INTERNAL PAINT FINISH 108 PUTTY 109 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 110 Emulsion paint 111 Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqmover and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. 112 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 113 Texture paint 114 Providing and applying Texture paint of approved shade and finish as per design and Architects Instruction. The surface to be texture painted shall be sanded and prepared to the satisfaction of Architect.Then the surface shall be finished with approved range of ARMOUR COATmake texture paint as per the manufacturers catalogue and specifications. The shade of the paint shall be approved by the Architects.(the entire system of paint including primer, putty & paint should have VOC content less than 25gms per litre) Basic price - Rs. 200/Sft + taxes 115 Enamel paint 116 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitableshade with ordinary paint of approved brand and manufacture 117 GLASS WINDOW 118 UPVC WINDOW 119 Supply & Installation of Modular UPVC single glazed window, with 8mm toughend glass and equavalent make hardware as per approval from architect incharge. 120 Wooden door 121 Single leaf flush door 122 Providing and fixing ISI marked flush door shutters (Make - Greenlam) as per IS code. non decorative type core of block board construction with internal frame of first classhard wood and well matched commercial 3ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including providing and fixing 4 nos. 125mm long and 3.5 mm thick stainless steel hinges, 25 mm thick African teak wooden lipping all around, nails, screws, adhesive, all necessary hardware and fixing arrangement, cutting & fixing of louvers / vision panels with 5mm thick glass including if any & fixin and polish in desired shade over a coat of approved primer etc. complete as per specification but inclusive of hardware fittings, Handles, cylinder Locks with Master key, Floor Stopper, Door Closer. Make of Hardwares - , OzoneHaffele, Hettich or Equivalent. 123 ELECTRICAL 124 Providing, Fixing, Installation, Testing & Commissioning of internal Electrical work that includePVC Conducting (in conceal/surface), wiring in.slab / wall, chasing cutting in RCC / masonry &, making the surface good, fixing MS/GI Boxes, Switches & Sockets, DB, MCB, Sub-main, inlets & outlets, Fixtures & Fittings, connections for Electrical, Telephone, TV, intercom, , other utilities etc. work in club ncluding of all required fixtures & fittings and all required connection in cluband connecting and finishing in false ceiling work etc to make the club operational and complete in all respects as per drawing and direction of Engineer-in-charge. 125 Fixing, Installation & Testing9/wledlightsround 126 LED COB LIGHT 12 WATTS 127 Fixing, Installation & Testing of Led strip . 128 LED STRIP LIGHT WITH POWER SUPPLY 129 Fixing, Installation & Testing ofHanging light 130 LED HANGING LIGHT 1200 MM 5070 PROFILE 131 MAGNETIC TRACK CHANNEL 3METRES LENGTH 132 LED MAGNETIC LAZER BLADE LENIER 12 WATTS 133 JOINTERS 134 100 WATTS 48V DRIVER FOR MAGNETIC TRACK 135 Audio Video 136 Central Control Unit: High performance digital wired conference controller unit Directly connects up to 60 units, expandable to 250 units with extension modules, Maximum power consumption 120W, RS-232 control support for third-party central control integration (camera tracking, microphone management, and meeting modes), 4-in/1-out seamless HDMI switcher, supporting 4 cameras at 1080p@60Hzwith zeroswitching delay 137 Chairman Unit:High performance Chairman Unit with High-directivity gooseneck condenser micro phone with red LED indicator ring, Microphone stem length 220mm, Low-voltage DC24V operation for enhanced safety,Signal to Noise ratio ≥65dB, Chairman-specific controls: Priority override, Delegate microphone mute,Speech request approval and management, 1.8-inch color TFT display screen showing real-time meeting data, Third-party system integration via RS-232, enabling cameratracking and remote micro phone control 138 Delegate Unit: High performance DelegateUnit with High-directivity gooseneck condenser micro phone with red LED indicator ring, Microphone stem length 220mm, Low-voltage DC24V operation for enhanced safety,Signal to Noise ratio ≥65dB,1.8-inch color TFT display screen showing real-time meeting data,Third-party system integration via RS-232, enabling camera tracking and remote microphone control 139 Surface Mount Speakers : Full-Range Driver2-way full range speaker, 60W RMS/240W peak, 70V/100V/8 ohm operation, 6.5 LF + 1 tweeter, weatherised to meet IP55 standards,ABS cabinet, mounting yoke included 140 Mixer Amplifiers : Mixer amplifier total outputpower 480W : 4-16 ohm or 70V/100V operation, Bluetooth/USB/ FM radio media player, 6 zones with individual level control per zone, 2 Aux and 3 microphone inputs with echo, repeat & delay functions, bass, treble and master controls, siren & chime functions available,heavy duty toroidal transformer 141 Digital signal Processor : 8 input 8 output DSPMatrix processor, High performance 400MHz floating point DSP processor, 48KHz 24 bit ADC& DAC, VAL DSP control software 142 Video 143 75 Display: 75 4KUHD resolution LEDDisplay with Android 11, 400 nits brightness; 16 GB Memory, Built in Wifi andCromecast,Built-in Bluetooth, Hotel mode, Meeting Mode,20W built in speakers, HDMI 2.0 X 3, AV X 1, USB X 2, RJ45 X 1, SPDIF Out x1,24/7 operational. 144 PTZ camera: 12x zoom; Video Output (HD)Interface: HDMI / Ethernet / USB 3.0; Video S/N Ratio > 50dB; Preset Positions: 256;Interface: RS-232 / Ethernet / USB 3.0. 145 Wireless presenter: Easy wireless conferencingfor small meeting rooms and huddle spaces, Interactive features: touchback, annotation, and blackboarding, Operating system: Windows 10 and higher macOS 11, Video outputs: 4K UHD (3840*2160) @ 30Hz. HDMI 1.4b or USB-CDisplayPort 1.2 (only Gen2); Audio output: HDMI; USB 1 X USB-A, 1 X USB-C; ClickShareButtons 1 or 2; ClickShare App Desktop & Mobile; Maximum number of simultaneousconnections (with Buttons and/or App): 32. 146 AV Controller Programmable networkappliance to control AV; having features such as: Ultra-Fast 1600 MIPS processor; 512 MB Onboard RAM; 1 M Non-Volatile Memory; 1 10/100 LAN Interface; 4 Digital I/O Ports; 1RS-232/422/485 Port; 3 RS-232-Only Ports. 147 Cable Cubby HDMI and USB Ports passthrough 148 Cable Cubby USB C type pass through 149 70 Meters HDMI Tx RX Set 150 USB C-C cable 151 HDMI to HDMI cable 3 M 152 USB A to USB B cable 153 HDMI to HDMI cable 15 M 154 USB A to AF 10 M 155 USB A to BM 05 M 156 HDMI to HDMI cable 01 M 157 USB A to A Cable 158 HDMI to HDMI cable 15 M 159 HDMI to HDMI cable 20 M 160 Directors Cabin 161 75 Display: 75 4KUHD resolution LEDDisplay with Android 11, 400 nits brightness; 16 GB Memory, Built in Wifi andCromecast,Built-in Bluetooth, Hotel mode, Meeting Mode,20W built in speakers, HDMI 2.0 X 3, AV X 1, USB X 2, RJ45 X 1, SPDIF Out x1,24/7 operational. 162 All in One Conference System:-All-in-one USB conferencing device that brings premium audio and video to huddle spaces to medium-sized meeting rooms up to 6 × 6 meters (20 × 20 feet). With six automatic beam-steering microphones, a 4K ultra-HD camera, and signature sound, the Videobar VB1 helps you huddle up and getmore done 163 Wireless presenter: Easy wireless conferencingfor small meeting rooms and huddle spaces, Interactive features: touchback, annotation, and blackboarding, Operating system: Windows 10 and higher macOS 11, Video outputs: 4K UHD (3840*2160) @ 30Hz. HDMI 1.4b or USB-CDisplayPort 1.2 (only Gen2); Audio output: HDMI; USB 1 X USB-A, 1 X USB-C; ClickShareButtons 1 or 2; ClickShare App Desktop & Mobile; Maximum number of simultaneousconnections (with Buttons and/or App): 32. 164 Common Backend 165 12 Port PoE network switch 166 Speaker Cable-2 conductor 14 AWG stranded,twisted, and unshielded cable, Insulation:Semi-rigid polyvinyl chloride;Jacket: Polyvinyl chloride. 167 Conferencing cable 168 Twisted Pair Cable 169 Connectors and patch chords 170 Equipment Rack: 18U Equipment Rack forhousing all rack mountable equipments with internal wiring, front glass door; heat dessipation fans; power distribution units etc.