Tenders Are Invited For Performing The Lighting Of The Recreation Square With The Dashboard In Strzyżewo Smykowe, Plot No. 38 Sheet 1

The Order Applies To The Area In Strzyżewo Smykowe, Plot 38 Sheet 1, Strzyżewo Smykowe, Which Does Not Have Lighting. The Designed Lighting Fixtures Will Be Powered From The Existing Zk1x-1P Cable Connector No.0168415 (Ii/8/2). The Network Is In Good Condition. E-1)- Build The Zk Cable Connector To Plot 38, In Accordance With The Attached Fig. No. E-1, Designed By The Zk Cable Connector Should Be Ground R≤5W. Lighting. Install A Double Boom On A Pole With A Height Of 1.0M And A Length Of 2.0M. Lighting Poles Should Be Placed On Prefabricated Foundations. Connecting With Luminaires Inside The Pole And Booms. Make With 3X2.5Mm2 Lines With A Length Of 10M. 0.8M Depth And 0.4M Wide Per 10Cm Layer Of Sand With A Wave Line With A Supply Of 1-3% Of The Excavation Length To Compensate For Soil Shifts. At The Places Of Change Of Cable Directions, Minimal Flexion Rays Should Be Maintained, Which, Depending On The Type And Diameter Of The Dz Cable, Takes For Multi-Food Cables And Multi-Core Cables Twisted From Single-Core R = 15D.Cabel In The Discovered State To Report For Technical Reception And To Perform The Geodetic Inventory Of The Cable Route. Insulation Resistance,- Insulation Voltage Tests. After A Positive Result Of Technical Acceptance By An Authorized Employee, Cover The Cable With A 10Cm Layer Of Sand, 25Cm Layer Of Native Soil, And Then Cover The Blue Foil Along The Entire Route. Cover The Rest Of The Cable Ditch With Native Soil With Whipped Layers. The Details Are Contained In Pt+Sst