Bids Are Invited For Hiring A Company Specialized In Type B Ambulance Leasing For The Mobile Emergency Service, Type A Ambulance, And Type A Ambulance With Accessibility For Sanitary Transport, And A Car Type Vehicle For Health Surveillance, Without Driver, With Free Mileage, To Serve The Sus Contagem/Mg Network.

Ambulance Unit B - Van - Vehicle Type Type With Steel And Original Factory Body, Long, High Ceiling, Not Less Of 2023, With Up To 10,000 Rounds, Airbag For 2 Cabin Occupants, Brake With Antibloque System (A.B.S.) Cubic Meters In Total, With Sliding Side Door And Rear Doors. Dimensions: Minimum Total Length 5,000 Mm; Minimum Distance Between Axes 3200 Mm; Minimum Load Capacity 1,400 Kg; Minimum Length Of The Service Hall; 3,100 Mm; Minimum Internal Head Of The Service Hall 1,800 Mm; Minimum Internal Width 1,650 Mm; Maximum External Width 2,200 Mm. Engine: Front; 4 Cylinders; Turbo With Inter Cooler; Diesel; Power Of At Least 100 Hp; At Least 24 Kgfm Torque; Minimum Displacement 2,000 Cc; Electronic Injection Power System. Fuel Supply: Minimum Capacity 70 Litersfrees And Suspension: Brake With Antiblor System (Abs) On Four Wheels; Disc Brake On Front Wheels, And Disc Or Drum On Rear Wheels; Independent Front Suspension With Stabilizer Bar; Rear Suspension: The Vehicle Should Be Equipped With Compatible Springs, Torsion Bars Or Pneumatic Or Hydraulic Sets. Components Must Have A Sizing That Exceeds The Load Imposed On Each Limb. For The Better Quality Of Driving, Vehicle Springs Should Be The Ones With The Lowest Deflection. Only Corrections Approved By The Chassis Manufacturer Will Be Allowed To Compensate For Improper Deflections Beyond The Tolerances Allowed. Corrections Will Not Be Allowed Due To Debalating. The Vehicle Must Be Delivered Balanced. The Set Of Front And Rear Suspensions Should Have Satisfactory Efficacy/Efficiency Regarding The Reduction Of Vibrations/Trepidations Originating From The Irregularity Of The Circulation Pathway And/Or Ambulance Type A Unit A - Furge Furgon Factory Votal, Adapted For Simple Removal Ambulance, With Not Less Than 7 Cubic Meters In Total. Total Length Min. 4,740 Mm; Minimum Length Of The 2,500 Mm Service Room; Minimum Internal Hearing Of The Service Room 1,540 Mm; Diesel Fuel; Equipped With All Standard Equipment Not Specified And Required By Contran; The Structure Of The Cabin And Body Will Be Original, Constructed Of Steel. The Internal Electric Panel Should Have 2 12V (Dc) Sockets. Electric Outlets Should Maintain A Minimum Distance Of 31 Cm From Any Oxygen Socket. The Lighting Of The Service Compartment Should Be Of 2 Types: Natural And Artificial, Should Be Done By At Least 4 Lamps, Installed On The Ceiling, With A Minimum Diameter Of 150 Mm, In A Base Stamped In Aluminum Or Injected Into Led Model Plastic. External Lighting Should Have A Manually Adjustable Articulated Headlight Spotlight On The Back Of The Body, With Independent Drive And Adjustable Directional Focus 180 ° Vertically. Have 1 Main Linear Or Archery Or Similar Bar Main Flags With A Single Module; 2 Flags At The Back Of The Ambulance In Red Color, At Least 90 Flashes Per Minute, When Driven With Injected Polycarbonate Lens. Being Able To Use One Of The Concepts Of Led. Acoustic Flag With Minimum Power Amplifier Of 100 W Rms -