Roof Insulation Work-Ve 3-11 Roof Sealing Work. The Present Construction Measure Is The Renovation Of The Listed Existing Building, Consisting Of Two Cubic Construction Bodies, The Five -Storey Head Building With Offices And Entrance Hall As Well As A Subsequent, Two -Storey Office Wing With Four Atriums. The Entrance Hall Leads From The Ec To The 4Th Floor And Is Covered With A Glass Roof From Five Saddle -Roof -Shaped Light Strips. In The Hall, 2 Enclosed Reinforced Concrete Stairs Lead To All Upper Floors In Which They Open Up On All -Round Corridors. This Atrium Is Expanded Step By Step In An Eastern Direction. The Building Is 1/3 Lower Cellar. The Ratskeller With Kitchen And Adjoining Rooms Is Located In The Basement; Furthermore, The Technology Center And An Archive Are Housed There. Description: The Following Measures Are To Be Offered. Flat Roof + 740 Sqm Head Construction Steam Barrel As Airtightness And Diffusion Density Layer Made Of Bitumen Tracks • 226 St Vertical + 325 M Horizontal Flat Roof And 56 St Vertical + 120M Head Building Drag, Steel, Galvanized, L/B/D 905/200/1 Mm 1X. Solid Roof Daa Pur/Pir-Hard Foam 0.023W/(Mk), D = 80 Mm, And 2150 Sqm Layer Of Fell On Flat Roof Inclination 2-2.5% Daa Pur-/Pir Hard Foam 0.026W/(Mk) D = 100Mm • 690 Sqm Thermal Stamp Layer On Solid/Pir-Hard Foam 0.023W/(Mk), D = 180 Mm • 500 St Flat Roof + 40 St Head Construction Customize The Steam Barrier And Insulation Layer • 2150 Sqm Flat Roof + 690 Sqm Head Construction Roof Seal Broof 2Lagig Ksp-Polymer-Bitumen Track Pye-Ksp3.0 Self-Adhesive Seams Close Polymer Bitumen Pye/Pyp-Gtps5 Fully Welding • 400 M Flat Roof + 120 M Head Construction Wall Connection With Front, Steam Lock, Insulation Wedge And 2 Layers Of Roof Sealing • 90 St Flat Roof + 40 St Head Construction. Customize 2-Layer Roof Seal • 2150 Sqm Flat Roof + 690 Sq. Throwing Protection, Drainage Layer, Filter Layer, Vegetation Strag Layer As Well As Plants And Gravel Safety Strips • 325 M Flat Roof + 120 M Head Building Attica Cover Titanzzink D 1Mm Cutting-B 500Mm 4X. Cutting-B 250Mm L 1000Mm 3X As Well As • 450 M Rear-Ventilated Facade Construction, As Protection Against Mechanical Stress From The Seal, Made Of Alloyed Zinc Din En 988 (Titanium Zinc) D 1Mm 2X, Aperture H = Approx. 31Cm, Including Holding Profile Made Of Galvanized Steel D = 1Mm And Corrosion-Protected Metal-Icing
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
