Installation Of Metal Joinery Except Doors And Windows - Mhh - K20 - Refurbishment Zmk - Trade: Rolling Departments. The Building K20 Of The Dental, Mouth And Jaw Clinic (Zmk) Of The Hannover Medical School (Mhh) Was Built In The 1970S. The Building Is A Six -Storey Building With An Additional Attic For The Technology Center. The Regular Floors Affected By The Construction Work Are Called Starting With U0 And S0 From Below. Due To A New Dental License To License (Zappro), Which Came Into Force On October 1, 2020, Significantly More Phantom Courses Are Required For Dental Teaching. This Increased Need Should Be Taken Into Account With The Renovation Of The Existing Course Hall And The Creation Of A New Course Room. The Area Around The Existing Phantom Course Hall S0.1030 In The Southern Part Of The Building Is Fundamentally Renovated. In Addition To The Exchange Of The Slope Ceiling And Floor Covering, The Phantomplaces And Other Medical Device As Well As Furniture Are Renewed. Walls Are Broken Off And New Lightweight Walls Are Set Up In Sub -Areas. This Creates New Premises. The New Phantom Course Hall With Adjoining Rooms Will Be Created From The Previous Large Laboratory S0.2070 And Adjacent Premises In The Northern Part Of The Building. Here, Too, As In The Existing Hall, Slope Ceiling And Floor Covering Are Replaced, Medical Device And Further Furniture Are Renewed. The Room Structure Is Prepared By The Demolition And New Construction Of Walls. Special Requirements For Individual Rooms Such As Soundproofing, Visual Covers By Inner Windows And Maintaining Privacy By Electrically Switchable Windows Are Taken Into Account. In Both Phantom Course Halls, Building Technology And Electrics Are Renewed And Adapted To The New Requirements. This Requires Mostly Work In The Basement Area. In The Course Of The Construction Work, There Is No Structural Expansion Of The Existing Building. The Existing Spatial Structure Is Essentially Maintained. The User Is To Be Handed Over To The User On August 15, 2025. All Work Must Be Completed By Then, As This Is A Fixed Date. The User Is To Be Handed Over To The User On April 1St, 2026. All Work Must Be Completed By Then, As This Is A Fixed Date. With This Award Procedure, The Services For The Roller Shutter Work Are Advertised. The Following Services Are Essentially To Be Provided: Venetian Store, Maintenance Work, Hourly And Material Costs
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
