Sand - Media, Vergalhao - Galvanized Iron, Ca 50 3/8 Dimensions 10, 0 Mm, 12 M Bar, Long, Dual Tube, High Density Polyethylene), With Externally And Corrugated Union, In 6M Long, Black, Black Diameter Dn/Dn 400 Mm (Minimum Internal Diameter Of 408 Mm), According To Dnit 094/2014. Ttttt, With Nominal Diameter Dn/Di 600 Mm (Internal Diameter Of 603 Mm), According To Dnit 094/2014., With Nominal Diameter Dn/Di 800 Mm (Internal Diameter Of 809 Mm), 25/07/2025, 4, 5Pa Structural Concrete Block, With A Wide Of 14Cm, With A Length Of 39Cm, With Standard Height Of 14Cm, Round Diagonal Leaked Brick 25X18x7cm, Ceramic, Measurements: 22X18x10 Cm Weight: 1, 87 Kg, Following The Standards Abnt Nbr 15270-2. The Material Should Be Produced From Natural Rock Crushing, Presenting Particles With Uniform Size Within The Specified Range, Without Excess Thin Or Impurities That Can Compromise The Quality Of The Mixture. It Should Be Free Of Organic Materials And Other Contaminants, Be Supplied Under Adequate Storage And Transport Conditions, Without Excessive Moisture Or Agglomerations, Ensuring Its Integrity For Immediate Application To The Work, Portland Cement Type Cp Ii, According To Abnt Nbr 16697 Classification, In Bags Of 50 Kg. The Material Must Be Manufactured By A Properly Certified Company, Present Identification On The Packaging, With Information On Type Manufacture And Validity. The Bags Must Be Righteous, Well Packed, Without Tears, Humidity, Hardening And Within The Expiration Date, Simple Head Nails, 17X27 Gauge, Made Of Good Quality Steel And Uniform Finish. They Must Have Straight Rod, Well Formed Tip And Symmetrical Head. The Material Must Be, Free Of Marked Oxidation, Deformations, Kneading, Poorly Formed Ends Or Any Irregularity. Tt, Simple, Monofilating Wire, 18 Bwg Gauge (Equivalent To 1, 24 Mm In Diameter), Suitable For Use In Steel Reinforcement Lashes In Reinforced Concrete Works, Manufactured According To Abnts Applicable Technical Standards. Produced With Low Resistance Steel, With Uniform Recipront That Good Malleability And Ductility. The Wire Should Be Supplied In Organized Rollers, Excessive Rust, Impurities, Breaks Or Tangled., Plasticizer Additive For Mortar And Plaster, Compatible With Portland Cement, Designed To Improve The Workability, Cohesion And Performance Of The Mixture. The Product Should Be Provided In Original Manufacturer Packaging, With Clear Identification, Including Trade Name, Composition, Date Of Manufacture, Validity And Mode Of Use. In Accordance With Abnt Technical Standards And Present Stable Formulation, Free From Contaminants Or Phase Separations. The Material Should Not Have Color, Odor Or Viscosity Changes That Indicate Degradation. Supply Should Ensure A Quality Product, With Proper Performance For Settlement And Coating Applications., 7 -Inch Diameter Diamond Disk (180 Mm), Suitable For Concrete Cutting. The Product Must Have High Resistance Segments With Adequate Metal Alloy, Providing Durability And Efficiency In Simple Or Armed Concrete Cutting. The Disk Must Be With
