Tenders Are Invited For Delivery And Assembly Of Photovoltaic Installations And Cwu Tankers To The Buildings Of The Tso Of The Kwidzyn Commune

• Delivery, Assembly And Launch Of A Photovoltaic Installation Together With An Energy Storage In The Tso In The Sasting With The Characteristics Given Below: ˗ The Photovoltaic Installation With The Target Power Of 10 Kwp Will Be Made On The Roof. As A Source Of Renewable Energy, Monocrystalline Photovoltaic Modules With A Capacity Of 540 Wp/Module Will Be Used, ˗ Photovoltaic Micro -Installation Should Be Installed Using A Publicly Available System Structure, ˗ The Mounting System Should Be Selected For External Conditions Characteristic Of A Specific Location (Load Strength), Should Not Be Interfered With Roofing Mounted According To The Manufacturers Recommendations, ˗ The Structure For Solar Panels Must Be Made Of Materials Resistant To The Harmful Effects Of External Factors, Including For Corrosion. ˗ Pv Modules Should Be Combined With Properly Selected Chains (Thongs). A 2-String System Has Been Designed, Which Will Form A Solar Generator And Will Be Connected To A Three-Phase Inverter With A 10 Kw And 9.5 Kwh Energy Storage Warehouse. Photovoltaic Installations Are Designed, Which Will Not Work As An Island. Imaginations For Individual Elements Are Given In The Design Documentation Constituting An Annex To Swz. Electric With 1500 - 2000 W With The Possibility Of Adjusting The Temperature Setting And Magnesium Anode. Steel Enamelled Tank Hanging With Thermal Insulation In Plastic Shell. Possibility To Work At A Pressure Min. 7 Bar. It Must Have The Ability To Periodically Overheat Water To Protect Against A Legionella And Must Be Protected Against Excessive Pressure Increase, ˗ The Tank Is To Be Installed In The Room 1.4 Above The Sink. The Tank Is To Be Connected: The Sink In The Room 1.4 And The Shower In The Room 1.5. (Fig. Monocrystalline With A Power Of 450 Wp/Module, ˗ Photovoltaic Micro -Installation Should Be Installed Using A Publicly Available System Structure, ˗ The Assembly System Should Be Selected For External Conditions, Characteristic Of A Specific Location (Load Strength), Should Not Interfere In The Roof Shell And Should Be Installed In Accordance With The Manufacturers Recommendations, It Must Be Made Of Materials Resistant To The Harmful Effects Of External Factors, Among Others, ˗ Pv Modules Should Be Combined With Properly Selected Chains (Thong). She Worked As An Island. Increases On Individual Elements Are Given In The Design Documentation Constituting An Attachment To Swz. Monocrystalline With A Capacity Of ~ 450 Wp/Module, ˗ Photovoltaic Micro -Installation Should Be Mounted Using A Publicly Available System Structure, ˗ The Mounting System Should Be Selected For External Conditions, Characteristic Of A Specific Location (Load Strength), Should Not Interfere In The Roofing And Each Time It Should Be Mounted In Accordance With The Manufacturers Recommendations. Sunny Must Be Made Of Materials Resistant To The Harmful Effects Of External Factors, Including Corrosion, ˗ Pv Modules Should Be Combined With Properly Se

Refer document

FileName	File Description
Global Tender Document	Tender Notice