Request For Quotation Electrode D-3Mm, Seb Size: 50 Mm × 50 Mm Length: 6 Meters Wood Breed: Coniferous Rocks (Pine, Spruce) Type Of Processing: Rubberized, From Four Sides (Four -Circuit) Humidity

Electrode D-3Mm, Seb Size: 50 Mm × 50 Mm Length: 6 Meters Wood Breed: Coniferous Rocks (Pine, Spruce) Type Of Processing: Rubberized, From Four Sides (Four -Circuit) Humidity: No More Than 22% Variety: 1St Or 2Nd (Without Rot, Blue, Lesions With A Fungus Or Insects) Surface: Non -Standing (On Demand - Strict) The Product Is New, Not Used Delivery Conditions: Delivery Is Carried Out In Accordance With The Volume And Terms Specified In The Contract Delivery At The Expense Of The Supplier To The Customer Warehouse Packaging: Stacks, With Gaskets For Ventilation Accompanying Documentation: Invoice, Invoice, Certificate Of Conformity Note: The Product Must Comply With The Requirements Of The Technical Regulation Of The Customs Union And Gost 8486-86 (Or Equivalent Regulatory Document). (Coordinate Samples With The Customer. Unloading And Storage At The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier), Gypsopolymer 2B1, 25 Kg. The Supplied Product Must Be A Dry Gypsopolymer Mixture Intended For Manual Application To The Walls And Ceilings Indoors With Normal Humidity. The Putty Should Combine The Properties Of The Leveling And Finish Layer (Universal 2 In 1). Basic Technical Requirements: Type: Gypsopolymer, Universal (Leveling And Finish); Color: White Or Light Gray; Maximum Filler Fraction: Up To 0.2 Mm; The Thickness Of The Layer For One Application: From 0.3 To 5 Mm; Consumption: Not More Than 1.2 Kg/M² Per 1 Mm Layer; Adhesion To The Base: At Least 0.5 Mpa; Saving: Absent Or Minimal, Without Crack Formation; The Viability Of The Solution After Closing Water: At Least 60 Minutes; The Time Of Complete Drying Of The Layer: 4–8 Hours (Depending On The Thickness And Conditions); Application Temperature: From +5 ° C To +30 ° C. Packaging And Storage: Packaging: Sealed Paper Bags Of 25 Kg; Marking: Each Bag Should Have Information About The Product, The Date Of Manufacture, Storage Period, Composition And Manufacturer; Shelf Life: At Least 6 Months In Dry, Covered Rooms. Documentation: Quality Passport; Certificate Of Conformity Or Declaration Of Tr Vehicle; Instructions For Use (Can Be On Packaging). (Coordinate Samples With The Customer. Unloading And Storage At The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier), Shpatlevka 2B1 Evaluating And Finish (Tts) The Putty Is The Leveling And Finish Putty 2 In 1. It Is Designed To Align The Plastered Concrete Walls And Ceilings, In Dry Rooms With Normal Humidity. Used For Internal Work. It Has Perfectly White, Economical And Convenient In Work. It Gives A High Result Of Finish Finishing Work. It Is Made On A Gypsum-Polymer Basis Enhanced By Cellulose And Modifying Chemical Additives. Properties: White; Inexhaustible - Only For Internal Work; Binder - Gypsopolymer Enhanced By Cellulose And Modified Additives Working Time Of The Mixture - 1 Hour; The Ratio Of Mixing-10.5-12.5 Liters Of Water Per Bag 25 Kg; Material Consumption - 1.2 Kg Per 1 Square. Meter With A Thickness Of 2 Mm; Application Layer - From 1 To 10Mm; Drying Time - 24 Hours At +20C; Adhesis To Concrete - 0.5 Mpa. Compression Strength - 2.5 Mpa Fraction - 0.16 Mm Packaging 25 Kg. (Coordinate Samples With The Customer. Unloading And Storage At The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier), Zhizhilins From Reek 50X50 Coniferous Species Of Wood (Pine, Spruce), Without Rot, Mold, Extraneous Inclusions, Humidity Up To 20%(Natural Or Chamber Drying), Surface: Strict, Section: 50X50 Mm Standard 6 M, Processing -Antisepting (Impregnation From Moisture And Fungus), Correspondence Certificate For The Same With The Customer., Color: Gray Purpose: Paul, Wall Texture: Powder Composition: Cement, Quartz Sand, Marble Filler, Functional Additives, Type Of Packaging: Bag/Package Of Goods Weight In Individual Packaging (Kg): 25 Gost R 52020-2003, The Type Of Material Is The Type Of Material -Cement Self -Leveling Mixture, The Maximum Layer Thickness Is At Least 30 Mm, It Is Possible To Apply In One Pass, The Minimum Layer Thickness Is Not More Than 5 Mm, The Consumption Of The Mixture Is Not More Than 15 Kg/ M2 Per 10 Mm Layer, The Life Of The Solution Of The Solution Is Not Less Than 30 Minutes At A Temperature Of +20 C, The Start Time Of 3-6 Hours, The Time Of Full Readiness Is Not More Than 7 Days Before Laying The Finish Coating, Compression Strength - Not Less Than 20 Mpa, Bending Strength - At Least 5 Mpa, Adhesion To The Base - At Least 1.0 Mpa, Filler Fraction - Not More Than 0.5 Mm, The Products Should Be New, Without Signs Of Damping Or Closing, The Packaging Is Indicated: Production Date, Storage Conditions, All Products Are Accompanied Passport Of The Quality (Coordinate Samples With The Customer. Unloading And Storage At The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier), Lumber (Overlaid Board) 1836 M., 0.05*0.15*6 Size Of Section: 50 Mm × 150 Mm Length: 6 Meters Wood Breed: Coniferous Rocks (Pine, Spruce) Type Of Processing: Rubberized, From Four Sides (Four -Circuit) Humidity: No More Than 22% Variety: 1St Or 2Nd (Without Rot, Blue, Lesions With A Fungus Or Insects) Surface: Non -Standing (On Demand - Strict) The Product Is New, Not Used Delivery Conditions: Delivery Is Carried Out In Accordance With The Volume And Terms Specified In The Contract Delivery At The Expense Of The Supplier To The Customer Warehouse Packaging: Stacks, With Gaskets For Ventilation Accompanying Documentation: Invoice, Invoice, Certificate Of Conformity Note: The Product Must Comply With The Requirements Of The Technical Regulation Of The Customs Union And Gost 8486-86 (Or Equivalent Regulatory Document). (Coordinate Samples With The Customer. Unloading And Storage At The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier), Corrugated Board 0.45 Mm Thick Sheet Thickness: 0.45 Mm The Width Is Useful: From 1000 To 1200 Mm (Depending On The Profile) Total Width: From 1050 To 1250 Mm Profile Height: From 18 To 44 Mm (Agree With The Customer) Sheet Length: By Order, 6 Meters Material: Galvanized Steel With Protective Polymer Coating (Pvdf, Polyester, Etc.) Or Without Coating Protective Coating: Zinc - At Least 120 G/M² (Depending On The Brand Of Corrugated Board) Color: According To The Ral Catalog (Specified When Ordering) Corrosion Resistance And Atmospheric Factors Installation Holes: Provided For Fasteners Weight 1 M²: Approximately 4.2 - 5.0 Kg (Depending On The Profile And Coating) Delivery Conditions: Delivery In Terms And Volumes Agreed In The Contract Delivery To The Customers Facility At The Expense Of The Supplier Sheets Are Packed In Bundles Protected By Packaging Material From Mechanical Damage And Moisture Accompanying Documentation: Quality Certificates, Technical Passports, Invoice, Invoice Note: The Corrugated Board Must Comply With The Requirements Of Gost 24045-94 And The Technical Regulations Of The Customs Union. (Coordinate Samples With The Customer. Unloading And Storage At The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier), Glue Liquid Nail Is Universal Glue No. 96 Transparent, Volume Of At Least 280 Ml (Coordinate Samples With The Customer. Unloading And Storage At The Expense Of The Supplier), Cement M450, Mark Of Strength: M150 Sand Block Is Hollow In Size: 400X200x200 Mm (Coordinate Samples With The Customer. Unloading And Storage In The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier) This Is A Construction Block Made Of Cement-Sand Mixture Used For The Construction Of The Walls Of Partitions And Other Structures. The Size Of 400X200x200 Mm, Density 1200-1600 Kg/M3, Strength M35-M100, Thermal Conductivity 0.35-0.9 W/M, Water Absorption Up To 6-12 %, Frost Resistance 25-50 Cycles, A Mass Of One Block 18-25 Kg, Color, Color. Gray, High Strength, Resistance To Fire And Frost, Affordable Price, Convenience In Laying, Good Sound Insulation (Coordinate Samples With The Customer. Unloading And Storage In The Customer’S Warehouse Is Carried Out At The Expense Of The Supplier)