Bids Are Invited For Company Hiring For The Supply Of Compound Kits On A Modular Wood And Three Masts In Polished Aluminum, Intended For The Fixation Of Flags, As Well As The Acquisition Of Official Flags From Brazil, São Paulo And Tarumã City, Made Of Weather Resistant Polyester Fabric.

Official Flag Of The Federative Republic Of Brazil. - Intended For External Use, Made Of 100% Polyester Fabric, Type In Unwanted Knitted Mesh, With High Resistance To The Weather. The Piece Should Be Stamped In Double -Sided, With Bright Colors And Faithful To Official Standards, As Established In Legislation And Technical Standards. The Finish Should Have Double Seams Reinforced At The Edges And Metallic Silys For Mast Fixation. The Dimensions Of The Flag Must Correspond To The Size Of 2, 5 Cloths, With Measurements Of 1, 12 Meters High By 1, 60 Meters Wide, Strictly Obeying The Official Proportion Of 7:10. The Clothing Must Fully Comply With The Provisions Of Abnt Nbr 16286: 2014 (Which Establishes The General Requirements For The Making Of Flags), Abnt Nbr 16287: 2014 (Specific To The National Flag) And Federal Law No. 8,421, Of May 11, 1992, Ensuring The Graphic Elements, Proportions And Chromatic Specifications Established., Tarumã Municipal Flag. - Intended For External Use, Proper To Resist External Weather Conditions. The Flag Should Be Stamped In Double -Sided, With Faithful Representation Of The State Official Elements Of The State, Respecting The Legally Instituted Proportions And Colors. The Finish Should Include Double Seams Reinforced At The Edges And Metal Ishoses For Fixing. The Dimensions Must Follow The Standard Of 2, Adopting The Same Proportion Of 7:10 Used For The National Flag, Which Ensures Uniformity And Visual Compatibility In Joint Institutional Exhibitions. The Clothing Must Comply With The Technical Requirements Of Abnt Nbr 16286: 2014 (General Requirements For Flags) And Meet, As Appropriate, To Federal Law No. 8.421/1992, Regarding The Preservation Of Proportions And The Integrity Of The Official Symbols., Flag Of The State Of São Paulo. - Intended For External Use, Base Kit And Mast For Flags. - 1. Modular Base: • Material: High Resistance Wood With Mahogany Decorative Laminate Coating (Or Similar), With Varnished Or Similar Finish That Provides Brightness And Protection. • Design: Structure With Three Levels (Triple Platform), With Metal Fittings At The Top, Sized For Secure Mast Fixation • Forship Finish: Provide Firm Fit And Aesthetic Finish • Minimum Base Dimensions: • - Width: 26 Cm • - Height: 29 Cm • - Length: 66 Cm2. Masters: • Quantity: 03 (Three) Units • Material: High Resistance And Lightness Polished Aluminum • External Diameter: 28 Mm (± 1 Mm) • Minimum Height: 2, 10 Meters Each. • Higher Finish: Tops Of The Type 30 Cm, Made Of Brightly Finished Aluminum, Firmly Fixed To The Upper End Of Each Mast (Total Mastro + Launches = 2, 40), 3. Accessories: • Each Mast Should Come With, 24/07/2025