Bids Are Invited For Object Of The Present Dismissal Is The Choice Of The Most Advantageous Proposal For Hiring For Exemption From Bidding For The Acquisition Of Thermals And Network Infrastructure Equipment To Meet The Needs Of The Municipality Of Lagarto/Se

Braided Pair Cable Without Shielding (U/Utp), With Nominal Length Of 305 Meters. Specification: Parced Pair Cable Without Shielding (U/Utp), With Cat 6 Transmission Category, Consisting Of 4 Pairs Of High -Purity Solid Copper Conductors, With Nominal Gauge Of 23Awg. Each Conductor Should Be Isolated Individually With High Density Polyethylene Thermoplastic Material (Hdpe), With Specific Electrical Characteristics And Distinct Colors For Identification. Isolated Conductors Should Be Twisted In Pairs, With Binning Steps Designed To Optimize Decoupling And Improve Transmission Performance. Pairs Should Be Organized Around A Separating Plastic Element And Protected By An External Coating In Pvc Material Retarding To The Flame, Classified As Cm, With Adequate Additives To Ensure The Resistance To Flame Propagation. The Cable Should Be Indicated For Horizontal Internal Installation, In Forced Air Flow Environments, Suitable For Applications Such As Gigabit Ethernet (1000Base-T And 1000Base-Tx), Fast Ethernet (100Base-Tx And 100Base-T4) And Atm-155 (Utp), Meeting The Rohs Directive For Restricted Substances Free Materials. The Cable Should Have Transmission Characteristics Verified Up To 250 Mhz, According To Asi/Tia-568.2-D Standards, Anatel Category I For Category 6 Armor, And National And International Standards Such As Abnt Nbr 14703, 14565, Abnt Iec 60332-3-25, Iso/Iec 11801. 6, 1 Mm And A Weight Of Approximately 39, 0 Kg/Km. The Supply Should Be Done On Coils Or Boxes With Nominal Length Of 305 Meters. The Electrical And Minimum Transmission Characteristics Should Include: Maximum Conductor Electrical Resistance To 20C From 9, 38 O/100 M; Maximum Resistive Imbalance Of 4%; Maximum Mutual Capacitance Of 5, 6 Nf/M To 1 Khz; Maximum Par-Terra Capacitative Imbalance Of 3, 3 Pf/M To 1 Khz; Characteristic Impedance Between 85 And 115 O (100 15 O) In The Range Of 1 To 250 Mhz; V, Patch Cord Optical Duplex Lc/Apc-Lc/Apc. Specification: Patch Cord Optical Duplex Duplex Lc/Apc-Lc/Apc Type, With Lc Connector Angled At Both Ends, Type 9/125 M Fibers, Suitable For 1G, 10G And Higher Applications. Length As Needed By The Project. Compatible With G.657.A1 Or G.652.D Standard, Low Insertion Loss, Ideal For Ftth, Fttx And Data Centers Networks. Made With Materials According To Iec And Itu-T. Standards, Fame Connector Rj45, Type Keystone Jack 90, Category 6. Specification: Female Connector Rj45, Category 6, Intended For U/Utp Network Cables Termination Cat.6, For Application On Structured Fabling Systems, Supported By Ansi/Tia-568.2-D, Iso/Iec 11801 Standards, En 50173-1, Iec 60603-7, Fcc Part 68, Nbr 14565, Ieee 802.3Bt (Poe ++), And Nmx-I-248-Nyce-2008. The Connector Should Have An Operation Frequency Of Up To 250 Mhz, 100 Ohm Impedance, Rj45 Female Connector Compatible With T568a And T568b Assembly Standard, 8 -Position 110 Idc Rear Connection, Compatible With 22 To 26 Awg Conductors. The Electrical Contact Material Should Be In 50 In (1, 27 M) Phosphate Bronze Of Gold And 100 In (2, 54 M) Of Nickel, And The Body Of The Non-Propagating Thermoplastic Product The Flame As Ul 94V-0. The Product Must Have Electrical Voltage Test Between 2500 Vdc Conductors For 3 Seconds, Maximum Contact Resistance Of 20 Mo, Minimum Insulation Resistance Of 500 Mo, C