Tenders Are Invited For Thermomodernization Of The Volunteer Fire Brigade Building Rybnik-Urzepowice Together With The Construction Of Photovoltaic Micro-Installations.

The Subject Of The Order Is The Thermo -Modernization Of The Volunteer Fire Brigade Building Rybnik - Orzepowice. Post -Base Dimensional Data Of Thermomodernized Facility: The Osp Building In Rybnik - Orzepowice Is A Two -Storey Building, Partly A Basement, With A Non -Elementary Flour. External Dimensions - 25.54M X 16.50M (Mundane Walls), Height - 7.52M. Building Orientation - North -East / Southwest. Main Entrance To The Building - North -Eastern Facade. Construction And Construction:  Dismantling Of Existing 5.0Cm (Polystyrene) Thick Insulation, Purification, Repair Of Damage Resulting From Insulation And Leveling Of The Wall Surfaces;  Demolition Of Fuel Chop And Highlight Base Windows;  Manual Demolition Of The Absorbent Well Of The Roof Dehydration;  Demolition Of The Walls In An Unused Part, Intended For The Warehouse;  Reconstruction Of The Band Drainage- Deepening And Making Decreases To The Wells Of The Kd400 At The Northwest Wall Of The Object;  Execution Of The Lintel Above The Garage Gates And The Entrance To The Magazine Insulation Of The Foundation Walls Of The Non -Basement Part To The Level Of 1.2M Below The Ground Using The Extruded Xps Polystyrene With A Heat Transfer Coefficient Of 0.034 W/M2*K And 15Cm Thick;  Insulation Of The Basement Walls Of The Object To The Foundation Foot Level Using The Extruded Xps Polystyrene With A Heat Transfer Coefficient 0.034 W/M 15Cm;  Insulation Of The Facilitys Above -Ground Walls With Mineral Wool With A Heat Transfer Coefficient Of 0.035 W/M2*K And A Thickness Of 18Cm;  Demolition Of The Roof Covering To The Ceiling Plate, Cleaning And Equalizing The Surface Of The Ceiling Plate;  Insulation Of The Roof Of The Object With A Mineral Wool With A Heat Transfer Coefficient 0.038 W/M2* Inheritance Polystyrene 1% With A Heat Transfer Coefficient Of 0.038W/M2*K;  Covering Roof Slope And Attic Walls Epdm Roof Membrane;  Replacement Of The Existing Window Joinery (Along With Window Sills And Window Sills) For A Woodwork With A Heat Transfer Coefficient U = 0.9 W/M2* Two -Chamber, Five -Chamber Frames, Factory Built -In Two Contracts; A Detailed Combination Of Window Joinery Is Included In The Technical Design In The Ak-18 Drawing;  Replacement Of The External Door Joinery, The Front Door To The Aluminum, Glazed Building (Safe Glass), With A Factor U = 1.3W/M2*K; Entrance Doors For Boiler Rooms Steel, Anti-Burglary, Detailed Combination Of Door Joinery Is Included In The Technical Design In The Ak-17 Drawing;  Replacement Of Existing Garage Gates For Segmental Gates, Raised With Doors;  Installation Of Systemic Launch Of Basement Windows; Making New Partition Walls Made Of Ceramic Blocks Gr. 12Cm, Assembly Of New Internal Door Joinery;  Renovation Of Basement Rooms - Dismantling Of Existing Layers Of The Floor To Reinforced Concrete Plate, Making Moisture And Thermal Insulation, Layers Of The New Floor And Cladding With Stoneware Tiles, Walling The Holes In The Outer Wall, Making Pa