Bids Are Invited For Id - 25.02.3.04 / 25.02.4.011 Acquisition Of Equipment And Consumer Material For Rpmon

Black Calle - Anatomical Breakup For Policing, Measuring 95 Cm By 10 Cm Not Including The Hoops, Made Of 40 -Line Shining Leather Soles, Lined With Black Cow, With Two Boring 2, 5 Inch Width Rings At The Ends Of The Piece, Properly Reinforced With Another 40 -Line Sole Layer. White Metal Hardware. Unit., Equine Shock Breast: Equine Shock Breastplate Should Be Made In Black, In 45 -Shaped V -Shaped Lines To The Horses Chest For Anti -Impact Protection Of At Least 68 Cm And At Most 70 Cm From Each Side In Black, Containing 4 Rings, 50 Mm And, 55 Mm In Nickelly Brass, 4 Cm And, 4 Cm And, 4 Cm And, 4 Cm 5 Cm Wide Ending V With, 20 Cm And 22 Cm Wide. To Unite The S Sides Of The V, A Belt With Two 50 Mm Hoops With A Leather Strip Of 35 Mm Width And 40 Mm Containing A Warge Of 110 Mm And 115 Mm Long Per 40 Mm Wide To Fix The Pectoral To The Belly. The Beginning Of The V Should Contain Two Straps In The Width Of, 19 Mm And, 24 Mm To Fix The Breastplate To The Seals Breastplate, Containing Reflective Ribbons In The Color Surrounding The Breastplate At The Top And Bottom. Dimensions Used For Greater Animal Chest Protection And Shock Troop Identification. The Occurrence Of Wounds On The Horse Or Even The Police, Even If Light, Due To Poor Preparation Of The Mounting Components, After Or During Its Use, Is A Criterion Of Disapproval Of The Product. Unit., Strite: The Stirrup Should Be Made Of Stainless Steel With Non -Slip Grater With Height Of, 150 Mm And, 170 Mm High And Width Of, 140 Mm And 160 Mm With Look Center Of, 40 Mm And, 44 Mm And The Lower Width Of, 55 Mm And 60 Mm And 2 Mm And, 8 Mm And, 8 Mm And, 8 Mm And 8 Mm At The Top, Made Of Stainless Steel. Fixed Non -Slip Grater For Greater Protection And Safety. The Occurrence Of Wounds On The Horse Or Is A Criterion For Disapproval Of The Product. Par., Hypical Loro: With Polypropylene Lace Lining, It Should Be Made, In A Double -Layer Leather -Layer, 2, 5 Mm And 7 Mm (Each Layer) And An Inner Nylon Tape Of 15 Mm And 17 Mm. Stainless Steel Buckle Of 30 Mm And 32 Mm Having A Stainless Steel Plate With 4, 2 Cm Finished, Combining The Buckle With Leather And 2 Copper Rivets. The Total Length Of Loro Will Be 1500 Mm, Finished With 15 Holes For Adjustment. The Occurrence Of Wounds On The Horse Or Shock Blanket In Black: The Blanket Should Be Made Of Interlaced Loom Fabric, Thick High Strength On The Outside And Inside. In Your Core It Will Have A 33 Density Foam Blade And Thickness Of, 02 Cm And Maximum 5 Cm, In The Supporting Part Of The Horse Lock Will Have A Protection With A Gel Blade From 8 Mm To 12 Mm Thick To Cushion The Impact On The Horse. In The Inside Of The Support Of The Cheris Will Have Another Reinforcement In Synthetic Plush, To Preserve, Mainly, This Part Of The Animal That Has Greater Bone Protuberance, Increasing The Risk Of Sparse, Ie, Wounds Caused In The Animal By Friction Due To The Contact Between The Riding Equipment And The Horse. On The Entire Outline Of The Blanket A 25Mm Reflective Tape Will Be Inserted In Gray. Unit., 07/22/2025, Back Protector: The Back Protector Should Be Produced With Eva Compound Injected Eva, Anti Impact With Per