The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Verification Of Measuring Instruments Lim-70 In The Number Of 2 Units Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Quantity 2 - Units Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Correction Of Measuring Instruments Dorrhomet Nmp-100 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Correction Of Measuring Instruments Pulse Generator G5-60 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Calibration Ground -Based Control Systems Socd-200 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Calibration Of The Luxometer Tka-Luks 20040-11 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Calibration Supporting Automated Automated Nakk-20-5-6.53041-13 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., Name Of Services Verification Of Checking Equipment Check Equipment And Ivd Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Quantity 2 - Units Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Outcoming The Unity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Calibration Of The Pressure Calibrator Adts 405 43681-10 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Testra -Measuring Dc Meta - Testing Of Insulation And Tanker Probe Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Calibration Of Megommeter M4122,40999-15 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Verification Of The Measuring Instruments In-11 In The Number Of 3 Units Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Quantity 2 - Units Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On The Outcome Of The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Verification Test Equipment For Insulation Systems Mit 420 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. According To The Instructions For Metrological Support, Si And The Control And Test Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In Connection With This, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Calibration Of The Multimeter Digital 34401A Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Correction Of Measuring Instruments Device Of The Controller Of The Pkd Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. According To The Instructions For Metrological Support, Si And The Control And Test Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In Connection With This, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Calibration Of Theodolite Aerological 2 Asht Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Correction Of Measuring Instruments Indicator Lever-Shaped Irb-001 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. According To The Instructions For Metrological Support, Si And The Control And Test Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In Connection With This, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Correction Of Measuring Instruments Diss-032 Control Panel Erp4-001 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. According To The Instructions For Metrological Support, Si And The Control And Test Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In Connection With This, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Correction Of Measuring Instruments Metal Line 0-150Mm Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. According To The Instructions For Metrological Support, Si And The Control And Test Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In Connection With This, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Correction Of Measuring Instruments Installation Upg-48 Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. According To The Instructions For Metrological Support, Si And The Control And Test Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In Connection With This, The Service (Verification, Repair) Should Be Carried Out In Stages., The Full Technical Characteristic Is Written In An Additional Description Of The Name Of The Services Calibration Device Combined For Measuring Light And Color Characteristics Ls -150 1 Koica Minolta Unit Of Measurement 1 Service The Deadline For The Provision Of The Service July 2025 Description Of The Required Functional, Technical, High -Quality, Operational And Other Characteristics Of The Purchased Services 1. The Verification Of The Measuring Instruments Is Carried Out By The Fireproological Service Or Metrological Services Of Accredited Legal Entities, In Accordance With The Methodology Of Verification Of Measuring Instruments, Using The Norms Of The Law Of The Republic Of Kazakhstan “On Ensuring The Uniformity Of Measurements” Of June 7, 2000 N53-Iii 2. The Contractor Must Have A Document On The Accreditation Of A Board Laboratory In The Republic Of Kazakhstan. 3. The Contractor Is Obliged To Be Responsible For The Timely And High -Quality Provision Of Services For The Verification Of Measuring Instruments. 4. The Verification Of Measuring Instruments Is Carried Out By The Forces And Means Of The Contractor. 5. The Contractor Is Obliged To Pay For All The Necessary Expenses Related To The Verification Of Measuring Instruments For Timely And High -Quality Provision Of Services. 6. When Verifying Measuring Instruments, Equipment Must Be Applied That Meets The Requirements Of The Legislation Of The Republic Of Kazakhstan In The Field Of Technical Regulation And Ensuring Uniformity Of Measurements. 7. The Verification Of Measuring Instruments Is Carried Out Completely By The Contractor, With The Preparation Of Acts Of The Services Rendered, According To The Results Of The Verification Of Si They Are Certified By The Imprint Of The Stigma And A Certificate Of Verification Of Si. 8. The Instructions On Metrological Support, Si And The Test And Verification Equipment Of The Temporary (Between The Caliber) Interval Should Be Stored For Optimal Operation Of Si, In This Regard, The Service (Verification, Repair) Should Be Carried Out In Stages.
