Bids Are Invited For Contracting Of Installation, Review And Electrical Maintenance Services In Various Facilities Of The Institution, Including: Installation Of 24 Outlets And 12 Simple Switches According To Technical Standards; Execution Of 3 Exclusive Circuits For Sockets And 2 For Lighting Between Rooms; 60 Meters Of Overlapping Conduits And Cabling; 90 Meters Of Inactive Wiring; Installation Of 3 Circuit Breakers Of 20A And 2 Of 16A Supplied By The Contractor; Din Distribution Table Installation With Up To 16 Positions; Installation Of 6 Hand Dryers And 2 Electric Drinking Fountains With Dedicated Circuits; 30 Meters Passage Of Piping To Electronic Gate; Installation Of 4 Presence Sensors For Automatic Lighting; Passage Of 5 Individual Single -Phase Extensions For Climate Control; Complete Review Of Plenary Lighting With Component Replacement; And 40 Meters Of Pipe And Cabling Of External Lighting With Photochelial Installation, Obeying The Nor ... Continue Reading>

Nbr 14136 Standard Socket Installation, With Fixation, Connection And Test. Each Point Corresponds To A Set With 2 2P+T 10A Or 20A Sockets, According To Load; Installation As Per Abnt Nbr 5410; Use Of Built -In 4X2 Boxes Or Overlapping According To Nbr 5431., Installation Of Simple Switches, Binding And Testing. Standard Sale 1, 20M Of The Finished Floor; Installation According To Nbr 5410 And Nbr 9050; Use Of Built -In Or Overlapping Boxes According To Technical Availability., Exclusive Electrical Circuit Execution (With Interconnection Between 4 Rooms)., Exclusive Electrical Circuit Execution For Lighting (With Interconnection Between 6 Rooms) 2, 5 Mm² Cables; Maximum Voltage Drop Of 4%; Dimensioning According To Table 36 Of Nbr 5410., Cabing Passage And Overlapping Conduits, In Environments With Limitation Of Use Of The Existing Infrastructure Of Rigid Conduit Or Corrugated Antichama, Fixed Every 80Cm (Vertical) Or 1, 5M (Horizontal); According To Nbr 5597/5598 And Nbr 5410., Removal Of Built -In Wiring (Walls And Ceilings) In The Rooms Of The All -So -Inactive, Air Or Embedded Inactive Wiring, With Disposal According To Conama 401/2008; Procedure According To Nr-10 And Nbr 5410., Installation Of 20A Monopolar Circuit Breaker (Provided By The Contractor), With Connection And Fixation Of The Outlets For Outlet Circuits; Installation According To Din Table; In Accordance With Nbr 5410., Installation Of 16A Monopolar Circuit Breaker (Supplied By The Contractor), With Connection And Fixation For Lighting Circuits And Drinking Fountains; Din Standard Standard Fixation; According To Nbr 5410., Installation Of Din Standard Distribution Board With Up To 16 Positions (Without Supply Of The Table) Overlaid Frame For Up To 24 Din Modules; Installation According To Nbr Iec 61439-1/3; Grounding Resistance ≤ 10Ω., Installation Of Electrical Hand Dryer, With Fixation And Electrical Connection Dedicated With 2, 5 Mm² Cable And Circuit Breaker 16A; Load Up To 2000W; According To Nbr 5410., Installation Of Electric Drinking Fountain, With Connection To The Power Point Inclusion Water And Sewage Installation; Dedicated Circuit With Circuit Breaker 16A And Cable 2, 5 Mm²; According To Manufacturer Plate Data And Nbr 5410., Pipe Passage And Electronic Gate (Between Frame And Gate) Tubing On Antichama Rigid Conduit; Conductors 4 Mm²; In Case Of Underground Path, Use Hepr 1Kv., Presence Sensor Installation (With Support And Connection) Sensors For Automatic Bathroom Lighting; Infrared Type Or Microwave; According To Nbr Iec 60669-2-1., Passage Of Individual Single-Phase Extensions (4 Mm² Cables) And Climatization Overlapping Conduits (Ac 18,000 Btus) A Single-Phase Circuit Dedicated By Equipment; Individual Crews Of 16A; Consider Starting Current And Regime; According To Nbr 5410., Review And Maintenance Of Plenary Lighting (Including Replacement Of Components Provided By The Contractor) Complete Inspection Of Luminaires; Replacement According To Nbr Iec 60598-1; Meet Selectivity, Insulation And Protection Criteria., Piping And Cabling Of External Lighting (With Support And Conduits) Overlapping Pipe; Cables 2, 5 Mm²; Installation Of 2 Photochells (220V Crepuscular Type); According To Nbr Iec 60730.