Request For Quotation Acquisition Of Medical Devices

Direct Ophthalmoscope Designed For Professional Direct Ophthalmoscopy Of The Fundus. Technical Characteristics: • Led Lighting • 6 Diaphragms - A Wide Spot, The Middle Spot, The “Macula”, The Gap, Glaucoma Mesh, “Target” • Green Filter (Steady), Superimposed On Any Of The Diaphragm • Disk With Lenses From +29 To -30 Diopters • Additional Fast Installation Of Lens +20 Diopters Or -20 Diopters • The Window Showing The Size Of The Selected Lens Is Highlighted • Smooth Rheostatic Lighting Adjustment On The Handle Of The Device • Soft Rubber Emphasis For Doctors Wearing Glasses • Lithium Battery • Compact Charger Options: Direct -Action Disk And A Wide Range Of Lenses: An Easily Accessible Direct -Acting Disk Allows Not Only To Quickly Choose The Necessary Lens, But Also Gives You Full Control As To Where You Are In The Lens Range, Which Makes Each Examination Easier And Faster. An Extensive Range From +29D To –30D In A Step In One Diopter Provides A Simple Examination Of All Structures Of The Eye And Covers A Wide Range Of Appointments. A Quick Change Of Lens +/- 20D Helps To Accelerate Diagnosis. Led Lighting: Professional Ophthalmoscope Also Uses Led Lighting For Brighter And White Long -Term Lighting, Which Provides Greater Efficiency And Less Frequent Change Of Light Bulbs. Fixed Filter: A Filter Without A Red Spectrum For An Advanced Examination Of Blood Vessels Can Be Used In Combination With Any Of The 6 Diagnostic Rays. Eyebrow Emphasis: Soft Emphasis Provides Easy Positioning And Protects The Lenses Of Doctors Wearing Glasses., Slit Lamp Designed To Perform The Following Functions: Inspection Of The Front Segment Of The Eyeball (Cornea, Conjunctiva, Sclera, Front Chamber, Rainbow Shell), Lens, Vitreous. To Perform The Above Functions, The Slit Lamp Must Correspond To The Following Parameters: Steps Of Increase: At Least 3 - 10X, 16X, 25X Field Of View: 22, 14, 8.5 Mm Oluders: No More Than 12.5X Okulara Lens Diameter: At Least 18 Mm Optics Of The Eyepiece: Convergent Angle Of Convergence Of At Least 10 Degrees Type Of Change Of Increase: 3-Speed Drum Switch Diopter Correction Of Eyepieces For Doctors With Ametropia: Within ± 6 Diptra Change In The Intercar Distance: In The Range Of 52-78 Mm Light Source: Low -Temperature Led Lighter 3B, 3W With Color Reproduction As Close As Possible To Traditional Halogen Lighting. Lighter Service Life: At Least 10,000 Hours. Lighter Location: Lower Changing The Width Of The Light Slit: From 0 To14 Mm, Smoothly, Unacceptable Changing The Length Of The Light Gap: From 1 To14 Mm, Smoothly, Unavailable Additional Apertures (Diameter): Not More Than 14 Mm, 8 Mm, 3.5 Mm, 0.2 Mm. Slit Turn: 0 - 180 Degrees The Lighting System Should Have The Following Types Of Light Filters: Heat -Absorbing, Steady (Green), Cobalt Blue Brightness Adjustment: Smooth, Next To The Joystick. The Range Of Movement Of The Mobile Base Must Comply With The Following Standards: Horizontally Forward - Back: At Least 90 Mm Horizontally Left - Right: At Least 100 Mm Vertically: 30 Mm The Range Of Movement Of The Facial Stop Must Comply With The Following Standards: Vertical Movement Of The Facial Stop: At Least 80 Mm Mandatory Presence Of A Fixation Mark With Led Illuminator Mandatory Compliance With Electrical Parameters Power Supply: 220 V; 50/60 Hz Weight: Up To 21 Kg Installation On An Electrical Platform To Adjust The Height Of The Device In Relation To The Patient.