Quotation Are Invited For Water Meter In Box;Vol;Plas;15Mm;114Mm

Quotation Are Invited For Water Meter In Box;Vol;Plas;15Mm;114Mm Delivery Date: 2025/08/12 Delivery To: Logistics - Hillstar Water Works Materials Store Delivery Address: 1 Bamboesvlei Road, Wetton Closing Date: 2025/07/23 Closing Time: 04:00 Pm Description: 1 Each X Water Meter In Box;Vol;Plas;15Mm;114Mm Specification: * Supply And Delivery Of 15Mm Water Meters On An As-And-When Required Rates Based Basis For The City Of Cape Town Contract Period: Not Exceeding The Minimum Threshold Of R750 000 Including Vat!!! Water Meter In Box - Type: Volumetric; Material: Plastic; Bore: 15Mm; Body Length: 114Mm; Requirements: Must Be Metrological Class C, Must Have A Wet Dial, Liquid Filled Register Fitted Hermitically Sealed That Will Withstand Condensation At All Times. Pulse Output And Must Be Annual Maintenance Repair Ready; Maximum Flow Rate: (Q/Max)+2%:3.0 M³/H,Permissible Continuous Flow(Qp)±2%, 1.5M³/H, Minimum Flow Rate(G/Max)±2%,15L/H,Transitional Flow Rate(Qt)± 2%,22.5L/H, Maximum Working Pressure, 1600Kpa; Material Of Box: Plastic, Meter Box Must Be Fitted With A Base Plate And Be Lockable, Meter Box Must Accommodate A Ball Stop Isolating Valve And Non Return Valve, Non Return Valve And The Strainer Must Be Built-In The Water Mater, Meter Boxes Must Be Fitted With B.S.P. Threaded Nipples And Or Hdpe Inlet And Outlet Quick Coupling And The Inlet And Outlet Ports Be The Same Size. Plastic Meter Box Materials Must Not Have A Recycling Value; Standards: Meter Boxes Must Be Sabs And Jaswic Approved, Meters Must Comply With The Provisions Of Sans 1529-1, In Addition It Is Req Uired That All 15Mm, 20Mm And 25Mm Meters Offered Within This Tender Must Be Tested And Sealed By An Authorized Official In A Sans 10378:2012 Accredited Laboratory Situated Within The Borders Of The Rsa, Meters Purchased Are Intended For Trade Purposes As Contemplated By The Legal Metrology Act. Important: Quotation Conditions: The Quotation Condition Listed Below Are In Addition To Those Contained In The Cct Standard Quotation Conditions And Must Be Fully Complied With: Clause 3: General Obligations 3.6.1.1.2 Based On The Rates As Reflected On The Price Schedule As And When Required And To The Supplier As Awarded By The Scm Delegated Authority. Guideline: Wherever Reference Is Made To Any Trademark, Name, Patent, Design, Type, Specific Origin Or Producer, Such Reference Shall Be Deemed To Be Accompanied By The Words Or Equivalent. Clause - 2.14.1 & 2.15 Provide, On Request By The Cct, Any Other Material That Has A Bearing On The Quotation Offer, The Supplier#S Commercial Position (Including Joint Venture Agreements), Preferencing Arrangements, Or Samples Of Materials Considered Necessary By The Cct For The Purpose Of The Evaluation Of The Quotation. If The Specifications Require The Supplier To Provide Samples/Technical Data Sheets, These Shall Be Provided Strictly In Accordance With The Instructions Set Out In The Specification. If Such Samples /Technical Data Sheets Are Not Submitted As Required In The Bid Documents Or Within Any Further Time Stipulated By The Cct In Writing, Then The Bid Concerned Will Be Declared Non-Responsive. The Municipal Bidding Document 6.1 Is Attached, To Be Eligible For Preference Points Bidders Are Required To Submit A Duly Completed, Current Dated Mbd 6.1 Document With Supporting Documents With Every Rfq Submission, Failure To Submit Will Result In Zero-Point Allocation. Please Note That The Mbd6.1 Document Is Valid A Year From Date Of Signature. Failure To Comply With The Above Will Result In A Zero (0) Allocation For Preference Points. Insurance Documents: Ensure That All Required Insurances Such As Your Public Liability, Employers Liability Or Coida And Motor Vehicle Insurance Are Attached And That They Are Up To Date. Tender Link : Http://Web1.Capetown.Gov.Za/Web1/Procurementportal/Rfq/Details/306971

Refer document

FileName	File Description
Global Tender Document	Tender Notice