Adaptable Melt Iron Gospel Outer Diameter Maximum 100 Mm, Outer Diameter Minimum 50 Mm For Water Pressure Pipes., Adaptable Iron Adaptable External Diameter 200 Mm, Minimum External Diameter 150Mm, For Pressure Pipes On Water Water Mains. Field Of Adaptation That Allows Full Union With Fiber Cement Tubes And Other Materials, Test Pressure: 5 Mpa (50Kg/Cm), Qualified Thermoplastic Coating Rilsan Nylon 11. (Wisize Ws Or Similar Model). In Cast Iron Outer Diameter Maximum: 350 Mm, Minimum External Diameter: 300 Mm, Adaptable Junta In Cast Iron External Diameter Maximum: 421 Mm, Minimum External Diameter: 391 Mm, For Pressure Pipes In Water Water Adutors. With 15% Stretching, Pressure 200M.C.A, Resistance To Minimum Traction Of 400 N/Mm² 250 N/Mm² Type To 130, For Use In K-9 Type Pipe Pipes. Dn 300Mm, Tripartite Seal Glove Dn 350Mm, Tripartite Seal Glove Dn 400Mm, Tripartite Seal Glove Dn 500Mm, Cast Iron Glove Mechanical Joint With Bolt 100 Mm W/ Rubber Rings. Internal And Outer In Anti-Corrosive Bituminous Enamel To Be Used In A Drinking Water, Dn-100 Mm, 150 Mm, With Rubber Rings. Ductile Cast Iron Glove Mechanical Joint, Dn-150Mm, Dn 200Mm W/ Rubber Rings. Cast Iron Glove Mechanical Joint W/ Screw T Dn 250Mm W/ Rubber Rings. Ductile Cast Iron Glove Mechanical Joint With Screw T, Dn-25 Mm., Dn 300Mm W/ Rubber Rings. - Ductile Cast Iron Glove Mechanical Joint With T, Dn-300 Mm Screw, Dn 350Mm W/ Rubber Rings. - Ductile Cast Iron Glove Mechanical Joint With T, Dn-350 Mm Screw, Dn 400Mm W/ Rubber Rings. - Ductile Cast Iron Glove Mechanical Joint With Tc, Dn-400 Mm, Dn 500Mm W/ Rubber Rings. - Ductile Cast Iron Glove Mechanical Joint With Tc, Dn-500 Mm, Dn 600 Ductile Casting Iron Cap, With Abnt Nbr 10160, Inspected By 400 Kn Effort Resistance Applied At The Center Of The Lid Through A 250Mm Diameter Test Shim According To Abnt Nbnr 10160, With A Minimum Weight Of The Lid Set And 48Kg Rim, Made Of Nodular Cast Iron According To Abnt Nbr 6916 Fe 50007 Or Fe 600003 Classes With A Cavity Enabling Manual Tool Opening, Manufacturing And Testing According To Sabesp Nts 033, Revision 08. Molha, Articulated Dn 300 Mm T-40 Model, 2500 Kg Resistance, With Anti-Rich Ring According To Nbr 10160 Specification, Anti-Corrosive Bituminous Enamel Coating, To Be Used In Water Networks, As Model., Ductile Cast Iron Pipe, Centrifuged, For Liquids Under Pressure, K-7 Class, With Elastic Joint And Bag, Conf.
