Smp 1 Cabinet Flooring. With The Installation Board Yes. The Presence Of A Lock In The Door Yes. Mounting Type Ev000945. Weight, Kg 6.5. Closed Type Cover (Closing). Corps Material. Steel: A Closed -Type Lid (Closing). The Surface Of The Shagrin. Call Of The Opening Of The Door, ° 105. Etera, Mm 395. Shiririna, Mm 310. Glubin, Mm 220. The Spectacle Of Protection Is Ip54. Climate Execution U2. Nominal Current, And 630. Non -Color Ral 7035. Doors - A Single/Single Hatch. The Door Of The Door Or Cover Of The Cabinet, Mm 1. The Cable Lines From The Bottom. Inputs Of The Cabinet, Mm, Mm 1.0. Vidd Installation, Floor -In -Line Metal Mm1. (Se), Thickness 3 Mm Gost 481-80. (Se), Type: Seamless Production Method: Hot Deformation Material: Carbon Or Alloy Steel External Diameter: 57 Mm Wall Thickness: 4 Mm Length 6M (Se), High -Thin Electrical Copper (Cu ≥ 99.9%) Coating: Tin (Tin) - Protection Against Corrosion And Oxidation Cable Section: 50 Mm² Form: A Cylindrical Tube Without A Seam Inner Diameter: ~ 9.5–10 Mm External Diameter: ~ 12–13 Mm Gilse Length: ~ 50–70 Mm (Depending On Gost/Tu) Type Of Installation: Pressure Testing With A Mechanical Or Hydraulic Press Working Temperature Range: From -40 ° C To +105 ° C Nominal Current: Until 195–210 A Protection Class: Increased Resistance To Vibration, Moisture, Aggressive Environment (Ce), Sip-4 Wire 4*16-0.6/1 Tu 3553-001-90364697-2015 Installation Temperature • C Of -20 To +50. The Operating Temperature Range, • From -60 To +50. The Radius Of Bending At Installation, Mm At Least 10 External Wire Diameters. The Specific Resistance Of The Insulation At A Long -Term Permissible Temperature Of The Heating Of Conductive Cores Is At Least 1* 1012 Ohm* Cm. The Permissible Heating Of Conductive Cores During Operation, • From 90. The Permissible Heating Of Conductive Cores During Short Circuits, • From 250. (Se), On Metal. (Se), Paronite Thickness 5 Mm Gost 481-80. (Se), Electrotechnical Copper Of High Purity (Cu ≥ 99.9%) Coating: Tin (Tin Coating) - Protection Against Oxidation And Corrosion Cable Section: 35 Mm² Form: Cylindrical Tube (Smooth, Without A Seam) Inner Diameter: ~ 7.5–8.5 Mm External Diameter: ~ 10–11 Mm Length: ~ 40-60 Mm (Depending On Gost/Tu) Installation: Crimping Using A Hydraulic Or Mechanical Press Temperature Range: From -40 ° C To +105 ° C Nominal Current: Up To 160–180 A Category Of Protection: Increased Resistance To Moisture, Vibrations And Aggressive Environment (Se), Smp 4 Cabinet Floor Hollow. High -Rise, Mm 800. Width, Mm 650. Glubin, Mm 250. Protection Orientation - Ip54. Climate Execution U2. Nominal Current, And 630. Non -Color Ral 7035. Perhaps There Is No Expansion. Closed Type Cover (Closing). The Material Of The Case Is Steel. The Wall Thickness Of The Cabinet, Mm 1.4. The Thickness Of The Metal Mm Is 1.4. The Form Of The Cover Of The Closed Type (Closing). Mounting Type Ev000945. The Number Of Inputs 1. Type Of Door Is A Single/Single Hatch. The Door Of The Door Or Cabinet Cover, Mm 1.4. Type Of Installation Of A Hinged, Floor. Wesu, Kg 27.8. Entering The Cable From Below. The Texture Of The Surface Shaft. The Presence Of A Lock In The Door Da., Material: Copper (Cu) Coating: Puddled (Tin Coating) - Protects Against Corrosion Wire Section: 25 Mm² Type Of Execution: A Sleeve For Crimping (Pressed) Form: A Cylindrical Tube With A Calibrated Inner Diameter Method Of Installation: Crimping Using A Pressing (Gmk, Pgr, Upg, Etc.) Temperature Range: From -40 ° C To +105 ° C Maximum Current: ~ 70–80 A (Se), Self -Supporting Isolated Wire 4*35. The Outer Diameter Of The Wire Is 22 Millimeters. The Active Resistance Of The Core Of The Wire Of The Self -Supporting Isolated 1.111 Ohms Per Kilometer. Permissible Current Load 160 Amperes. The Minimum Bending Radius During Installation Of A Wire Of A Self -Supporting Isolated 240 Mm. (Se), Self -Supporting Isolated Wire 4*25. The Outer Diameter Of The Wire Is 21 Millimeters. The Active Resistance Of The Core Of The Wire Of The Self -Supporting Isolated 1.54 Ohms Per Kilometer. Permissible Current Load 130 Amperes. The Minimum Bending Radius During The Installation Of The Wire Of The Self -Supporting Isolated 184 Millimeters. (Se), Dimensions: 6 × 9 Mm (Width × Height). Material: Brass. Method Of Installation: On A Din-Rack. Connection Method: Screw. Number Of Connections: Usually From 8 To 12 Holes. Nominal Current: 100 A. Nominal Voltage: 400 V. Temperature Range: From -40 To +105 ° C. The Degree Of Protection: Ip00 (There Is No Protection Against Exposure To External Factors). The Color Of The Insulator: Yellow. Weight: From 32 To 42 G (Ce), The Liner Sleeve Material Copper, Tin Nominal Cross Section Of The Conductor 70Mm² Inner Diameter 11.5Mm The Outer Diameter Is 13.5Mm The Length Of The Sleeve Is 100Mm The Wall Thickness Is 1.0-1.5 Mm The Temperature Range Of Operation Is From 60 ͦ C To +150 ͦ S Maximum Current Up To 280-300A Type Of Installation Crimping Corrosion Protection Class Increased (Se), Smp 3 Cabinet Floor Hollow. E Highlight, Mm 650. Width, Mm 500. Glubin, Mm 220. Protection Orientation - Ip54. Climate Execution U2. Nominal Current, And 630. Non -Color Ral 7035. Perhaps There Is No Expansion. Closed Type Cover (Closing). The Material Of The Body Steel. The Door Of The Door Is A Single/Single Hatch. The Lock Of The Lock In The Door Is, With The Installation Board, The Cable Lines Are On The Bottom. The Input Of The Inputs 13. A Closed -Type Lid Form (Closing). The Texture Of The Surface Is Shagren. Weight, Kg 13.9. The Toll Of The Door Or Cover Of The Cabinet, Mm 1. Metal Mm, The Wall Thickness Of The Cabinet, Mm 1.0. Daily Door Opening, ° 105. Type Of Installation Ev000945. The Type Of Installation Is Hinged, Floor. (Se), Polyvinyl Chloride Film With An Adhesive Layer Based On Rubber. It Is Operational At Temperatures From -30S To +30 S In Conditions Of Non -Aggressive Environments, Withstands The Test Voltage (Electric Strength) 10. The Operating Temperature Range From -30S To +80C.Material Pbx. Electric Strength Of At Least 10Kv. Dlina 25 Is Not Less. The Size Of 20Mm. (Se) (Se)., Frontier Flaw Ppn-33. Nominal Current 160A. Gost 503339.0-2003. Voltage From 220V-Do400v. (Se), Material Copper, Tin Nominal Cross Section Of The Conductor 120Mm² Inner Diameter 14.5-14.8Mm The Outer Diameter Is 17Mm The Length Of The Sleeve Is 120-130Mm The Wall Thickness Is 1.1-1.5Mm The Temperature Range Of Operation Is From -60 ͦ С To +150 ͦ S Maximum Current Up To 390-410A Type Of Installation Crimping Corrosion Protection Class Increased (Se), Coating: Puddled (Tin Coating) - Protects Against Corrosion Wire Section: 16 Mm² Type Of Execution: A Sleeve For Crimping (Pressed) Form: A Cylindrical Tube With A Calibrated Inner Diameter Method Of Installation: Crimping Using A Pressing (Gmk, Pgr, Upg, Etc.) Temperature Range: From -40 ° C To +105 ° C Maximum Current: ~ 70–80 A (Se), Type: Seamless Production Method: Hot Deformation Material: Carbon Or Alloy Steel External Diameter: 108 Mm Wall Thickness: 5 Mm Length 12M (Se)
