3 It Is Planned To Perform Works On A Section With A Length Of 474 Mb, I.E. Section Ii From Km 0+000 To 0+366 And Section Iii From Km 0+000 To 0+108 Making A New Surface Width 2.75M From Iomb And Boards Measuring 100X75x 12.5 Type C Arranged 2X1.0 M With A Trace Belt With A Width Of 0.75 M Wide From Kłsm 0/31.5 Gr. 12 Cm And On Arches With Rays Smaller Than R = 60M, The Plates Should Be Laid On A Width Of The Road Equal To 3.0M. Bilateral Roadside Is Also Planned, 1.0 M Wide, Hardened Klsm 0/31.5 Gr. 10 Cm. The Reconstruction Of Existing Conventions And Cleaning Of Existing Drainage Ditches And New, In A Manner Consistent With The Assumptions Entitled In Addition, The Investment Should Be Mentioned By One Existing Culvert For The Pehd Pipe Culvert Cardted With A Diameter Of 40Cm And Length 9 M.2. Location: Trzebielino Commune, Bytów Poviat, On Plots Of Land No. 635/1, 94/11, 632/1 Trzebielino3 Precinct. The Scope Of Work Includes: 1) Geodetic Delimitation Of The Designed Road2) Trunks And Possible Thickets Located In The Road Lane, Colliding With Robots. 3) Making Excavations And Embankments In Accordance With The Assumptions Of Pt And Building The Appropriate Material In The Embankment Allowing To Obtain On The Surface Of The Pavement Required Min. Indicator Of 1.0, Including The Performance Of Geological Tests. Natural Gr. 10 Cm - According To Pt.5) Complement The Belt Between Kosm 0/31.5 With Density. 6) Making Roadside Width 1.0M From Klsm 0/31.5 Gr. 10 Cm. As -Built Geodetic Documentation With Confirmation Of Notification To The Geodetic Resources Of The Poviat Eldership. 10) After All Construction Works, Cleaning Up The Construction Site And Bringing To The Original State Of Violated And Degraded Areas, Adjacent To The Road Belt And Related To The Conducted Construction Works Settlements With The Institution Co -Financing The Task. 12) The Implementation And Setting Of An Information Board With Dimensions Of 120X80 Cm, In Accordance With The Template Indicated By The Investor. The Set Scope Of Work Is Determined By The Design Documentation Developed At The Request Of The Contracting Authority Constituting An Integral Part Of Swz, Listed In Annex 7 To Swz.
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
