University Wallet, Consisting Of 7/8 Tube Chair Structure, The Chair Structure Should Have A Metal Books Door, The 3/4 Tube Structure On Plate 18, All Metallic Pieces Should Be Joined By Mig Welding, The Clipboard Structure Should Be Joined By The Chair By Fitting, All Metal Pieces Should Be Treated In Chemical Bath Sets, With Anti -Corrosive Treatment, The Painting Should Be Electrostatic With Epoxy Ink (Enamel), The Tips, Seats, Backrest, Bushings, Clipboard, Various Objects Should Be Polypropylene, The Seat Should Be Fixed To The Structure For At Least 4 Screws The Backrest Should Be Fixed By At Least 2 Bushes In The Same Color As The Backrest, The Clip Should Have Minimal Dimensions That Fits An A4 Sheet In Both Length And In The Length Width And The Metal Structure Should Be Fixed For At Least 4 Screws, The Port Port (Objects For School Case, Water Bottles, Gel Alcohol, Etc.) Should Be Coupled On The Front Of The Clipboard By Fitting By Channels Is Fixed By At Least 2 Screws, So That It Improves Ergonomics (Visible And At The Range Of The Student). (One) Table And 1 (One) Chair For Student Size From 0.93M To 1.16M. The Tips, Seat, Top, Storage Holders And Bushings Should Be In Injected Polypropylene. Rectangular Top With Rounded Corners, Endowed With A Pen Door, The Top Should Be Fitted And Fixed To The Table Structure For At Least 6 Screws, The Door Holder (Objects For School Case, Bottle With Gel, Cell Phone Etc ...) Should Be Coupled To The Front Of The Table Top By Fitting By Channels And Fixed By At Least 2 Screws, So That It Can Be Enhanced ( Visible And Within Reach Of The Students Hands). Finished Minimum Dimensions 600 Mm (Width) X 450 Mm (Depth). Seat And Backrest Fixed To The Metal Structure By 4X16 Rivets. Structure Composed Of Vertical Amounts And Longitudinal Dish Made Of Carbon Steel Tube; Higher Carbon Steel Pipe, Curved In “C” Shaped, With Circular Section Of Ø = 31, 75 Mm (1 1/4 ”); Feet Made Of Carbon Steel Tube Circular Section Of Ø = 38 Mm (1 1/2”), Carbon Steel Pipe Chair Ø = 22, 22 (7/8). All Metal Pieces Should Be Treated In Chemical Bath Sets, With Anti -Corrosion Treatment, The Painting Should Be Electrostatic With Epoxy Ink (Enamel), Composed Of 1 (One) Table And 1 (One) Chair For 1,19M To 1.42M Student. Tops, Backrests, Book Holders, Diverse Objects (School Supplies, Cell Phone, Personal Protection Masks Water Bottle Etc ...) And An Area For Gelfixed Alcohol Vial On The Front On The Edges Shaken With Plumbing And Fixing Of The Other Objects, So That It Is Visible And Within The Reach Of The Student, Fixation Of The Top By At Least 6 Bolts And Minimum Dimensions Finished 600 Mm (Width) X 450 Mm (Depth). Seat And Backrest Fixed To The Metal Structure By 4X16 Rivets. Structure Composed Of Vertical Amounts And Longitudinal Dish Made Of Carbon Steel Tube; Higher Platter Made Of Carbon Steel Tube, 22 (7/8). All Metal Pieces Should Be Treated In Chemical Bath Sets, The Painting Should Be Electrostá
