Steel Ca 25A D = 20 Mm, Ca-25-6, 3 Mm (1/4) Steel-Lisa A-36 Bar, Ca-50-25, 0 Mm (1), Ca-50-6, 3 Mm (1/4), 8, 0 Mm (5/16), 17/07/2025, Ca-50 (3/8) Steel, 5 Mm Steel, 5 Mm (1/2), Ca -60 - 4, 2 Mm Steel, Acrylic Adhesive /Contact Glue, Adhesive Adhesive For Mortar And Chapiscs (Bianco /Sika Chapisco Plus (D = 1.00) /Chapix Quartzolit (D = 1, 050Kg /Dm3) Or Equivalent), Additive Waterproofing Normal Handle For Mortar And Concrete Ref. /Vedacit (D = 1,00) Or Equivalent, Ball -Type Tickling Lever No. 14 Bwg, 18 Bwg, Thin Sand, Medium Sand, Medium Sand, Aci, Aci, Grouting Mortar, Bi -Flexible Waterproofing Mortar (Viaplus 1000 /Sika Equivalent), Finish/Wheel Lining U 20X15x30mm, 3/8 Screw Washer, 3/4 Washer, 14 X 19 X 39 Cm Fbk = 4, 5 Mpa (Nbr 6136), Gravel # 1, Vidia Diameter 1/2, Nylon Bush With Screw - S6, Nylon Bushing Screw 10 Cm - S16, Cable Cable D = 6, 35 Mm (Stordel), Simple Brass Lock No. 20, Simple Brass Lock No. 30, Brack Pellet No. 50, Call 5X6 Cm, Hydrated Cal, Painting Cal, Callet Structural Concrete 14 X 39 Cm Fbk = 4, Cantle 1 1/4X 1/4 Ch. 1/4, Singer 1.1/2 X 1.1/2 Ch. 3/16, Singer 2 X 2 Ch. 5/16, Ceramic 45X45 (Approximate Dimension) - Floor Pei Greater Than Or Equal To 4, Non -Slip Ceramic 45X45 (Approximate Dimension) Floor Pei Greater Than Or Equal To 4, 1/4 Steel Plate, Folded Steel Plate No. 10, 35 Mm) 11 (3, 00 Mm), Folded Steel Plate No. 12 (2, 65 Mm), Folded Steel Plate No. 13 (2, 25 Mm), Plasterboard, E = 12, 5Mm, 1200X2400 Mm, Moisture Resistant, 5 Mm, 1200X2400mm, Portland Cpii-32 Cement, 12 Mm 2 Mm 2 M, 10 M, 10 M Plasticized 17 Mm 2, Normal Fiber -Cement Tile, Red -Colored Resin -Tile Tile, Wavy Galvanized Tile 0, Trapezoidal, 43 Mm Tile Cumerate, Rereading For Concrete, Winging Brush, Steel Steel Structure 350 / Astm A572 G50 (Manufacturing And Assembly), Metal Structure Air 350 Color Air/Astm A588 (Manufacturing And Assembly), Metallic Structure Mr250/Astm A36 - Quotation (Manufacturing And Assembly), Iron 1/8 X 1, Iron 1/8 X 3/4, Iron 1/8 X 7/8, Iron 1/8X2, Boring 1 X 3/16, Iron 1/2 X 4 Iron 1/4 X 1.1/4, Flat Iron 1/4 X 2, Boring Iron 1/4X1 1/2, Boring Iron 1/8X1, 3/16 X 3/4 Iron, Boring Iron 3/8 X 2, Boring Iron 3/8 X 3, Boring Iron 5/8X3/16, Square Iron 3/8 (Full), Round Iron 1/2 (Full), 3/8), Crepe Tape) 19Mm, Tab, Reinforced Metal Ribbon With Drywall Corners, 200 X 8 Mm Pvc Lining, Hook/Screw Aluminum Tile, Powder Plaster, Grease, 02 Glass Leaf Anodized Aluminum, Window In Anodized Aluminum Maxim Air, 17 Mm Plastic Joint 27 Mm, Conventional Slab (Convention) Pre-Molded With Line Eps, Voltarane Slake (Conventional) Pre-Molded With Floor Eps, Iron 100, Wood Sandpaper No. 220, Wood Sandpaper No. 240, Black Plastic Lone, Pva Run, Pastic Mass, Male Structural Block 14 X 19 Cm Fbk = 4, Metalon 20 X 20 Cha
