Supply And Installation Service Of Transparent Tempered Glass Sliding Door, With Opening In A Single Sheet, In The Approximate Dimensions Of 1 Meter Wide By 2, 10 Meters High. The Door Should Be Made Of Colorless Tempered Glass With A Minimum Thickness Of 8 Mm, In Accordance With Abnt Nbr 7199, Ensuring Strength, Durability And Safety. The Set Should Include All Components Necessary For The Complete Operation Of The Sliding System, Such As Upper And/Or Lower Rail, Pulleys, Handle, Compatible Lock, Course Limiters And Other Fixing And Sealing Accessories. The Installation Will Be Performed By A Specialized Technical Team, With Precise Execution, Ensuring Leveling, Alignment And Perfect Sliding The Glass Sheet. The Supplied Material Should Be New, Top Quality And Free From Imperfections Such As Cracks, Blisters, Stains Or Chipped Edges. All Transportation, Delivery, Assembly And Installation Will Be The Responsibility Of The Contractor, Who Should Also Make A Prior Technical Visit To Measure And Adapt The Site. Any Damage Caused During The Execution Of The Service Should Be Repaired By The Company, Without Burden To The Public Administration., Supply And Installation Service Of Tempered Glass Door, With Approximate Dimensions Of 90 Centimeters Wide By 2, 10 Meters High. The Door Should Be Made Of A Minimum -Thick -Grabbed Tempered Glass Of 8 Mm, Impact Resistant And In Accordance With Abnt Nbr 7199, Which Deals With The Use Of Glass In Construction. The Door Model Will Be Of The Pivoting Type, And Should Track All The Accessories Necessary For Its Installation And Operation, Including Pivoting Axis, Compatible Hinges And Lock. The Installation Must Be Performed By A Specialized Team, With Leveling, Plumbing And Proper Adjustments, Ensuring The Full Operation Of The Opening System. The Edges Of The Glass Should Have A Polished Finish, With Proper Seal. All Material Provided Must Be New, Top Quality, Imperfections, And Transportation, Delivery And Installation Are The Responsibility Of The Contractor. The Contracted Company Should Make A Technical Visit To Measure The Measures And Suit The Place Of Installation. Any Damages Caused During The Execution Of The Service Should Be Repaired, Without Any Burden To The Contractor., With Approximate Dimensions Of 63 Centimeters Wide By 2, According To Abnt Nbr 7199, With Adequate Mechanical Resistance, Safety And Uniform Finish. The Model Should Be Of The Pivoting Type, Including All The Necessary Accessories For Full Operation, Such As Compatible Lock, Pivoting Axle, Hinges And Other Fixing Items. The Installation Will Be The Responsibility Of The Contractor, And Should Be Performed By Specialized Technical Team, With Alignment, Plumbing, Proper Sealing And Final Finish. The Supplied Material Should Be New, Free Of Cracks, Bubbles Or Any Defect That Compromises Safety Or Aesthetics. The Contractor Should Make Prior Technical Visit To Verify The Conditions Of The Site And Definition Of The Exact Measures. All Transportation, Delivery And Installation Of The Door Will Be The Responsibility Of The Contracted Company. Any Damages Caused During The Execution Of The Service Should Be Repaired Without Burden On Public Administration., Transparent Common Glass Supply And Installation Service, Including
