Tenders Are Invited For Execution Of A New Energy Connection Of The Museum Warehouse Building

3 The Subject Of The Contract Is Named Later In Swz Subject Of The Order. 2. The Subject Of The Contract Includes In Particular: 1) Dismantling Of Existing Rg Switchgears On The Ground Floor Of The Building (4 Switchgears), 2) Inventory, Checking, Describing, Finally Securing The Existing Cables And Circuits For Re -Attachment, 3) Assembly Of The New Rg Switchgear, 4) Plug In Previously Secured Cables And Circuits To The New Rg Switchgear, If Necessary With The Necessary Correction, 5) Existing Power Supply Of The Archive Building From The Neighboring Building As Temporary. Lightning The Existing Wlz To The Replaced Rg Switchgear, 6) Making The Pwp Switch (Outside The Building) Along With The Wlz Supply Line To The Replaced Switchgear Without Connecting Wlz To The Switchgear. Introduce Wlz Pro The Target Connection Of The New Wlz Will Be Carried Out After Completing The Work Related To Energa, 7) Installation Of The Power Line From The Pwp Fire Switch To The Cable And Meaning District Power Cabinet (Energa Operator)-Protection Of The Power Line In The Pwp Cabinet Without Connecting (The Connection Will Be Made After The Cable-Meter Connector), 8) Fire Control Panel Power Supply From The Mentioned Rg Switchgear As Temporary. To Do This, The Protection Should Be Added In The Switchgear For The Needs Of The Ssp Headquarters. The Completed Power Cord Can Be Brought Near The Headquarters And Secure Without Connection. The Target Connection Of The Ssp Control Panel Supply Line Will Be Carried Out After The Energa Connection Works Completed, 10) Making The Pwp Current Switch Button At The Entrance To The Building, 11) Within The Basement, The Arrangement Of Cable Trays: Course, Assembly (Concealed), While The Route Should Be Preceded By Checking The Possibilities Of Their Course So That During The Furrows There Is No Collision With Other Installations, 12) Assembly Of Anti -Tire Protection, 13) Assembly Of Anti -Revelly Protection, 14) On The Basement Of The Basement - Necessary Plaster And Painting Works In The Region Of Culverts And Assembly Adapting The Aesthetics Of The Places To The Remainder Of The Walls And The Aesthetics Ceilings (To The Original State); On The Ground Floor Floor - Masonry And Plastering Works Related To The Exchange Of The Headquarters, Plastering Works - Sewing Installation Furrows, Painting Rooms Covered By Works (Corridor, Watchtower, Vestibule), 15) Performing Technical Mucus Separating Areas Of Works From The Rest Of The Rooms (To Limit The Spread Of Dust), Including In The Basement Room In Which The Culvert From The Connector To The Interior Of The Building Will Be Made And In Places Of Other Drilling, On The Ground Floor The Separation Of Furrows And Rg Switchgear Areas. In Addition, Work Using Vacuum Cleaners To Eliminate Dust And Pollination, 16) Developing As -Built Documentation (Drawing, Photo, Descriptive, Complete Ce Certificates, Declaration Of Compliance Together With Certificates About The Technical Properties