Tenders Are Invited For Renovation Of The Inner Ring Of The Defensive Wall In Oleśnica, Zone B - Section Between Ul. Lwowska 1, And Primary School No. 2

The Subject Of The Contract Is The Performance Of The Task Entitled Renovation Of The Inner Ring Of The Defensive Wall In Oleśnica, Zone B - Section Between Ul. Lwowska 1, And Primary School No. 2 ”. The Scope Of Necessary Renovation Works Is Determined By The Design Documentation With Technical Expertise, Developed By: Design And Building Supervision ,, Projbud Zbigniew Staniec. As Part Of The Renovation Works, A Repair Of An Existing Defensive Wall With A Length Of About 72 M Should Be Made. The Works Include, Among Others Destruction Over 3Cm And Laying Into Carved Nests Of New Gothic Bricks With Identical Dimensions, I.E. 26X12x9 Cm;  Scoring In Bricks Of Crushed Or Biologically Destroyed Places To A Depth Of Up To 3Cm And Filling These Places With Brick Mass On Glue;  Supplementing The Demolished Surface Of The Crown Of The Wall And Faces With Bricks With Identical Historic Appearance And Dimensions Of The Brick Gothic, Namely 26X12x9 Cm, Class Zmp 15Mpa (For Individual Order In The Brickyard) - Using Anchor Nests In The Wall Of 1 Brick In A 50/50Cm Spacing;  Cleaning The Face Surface Of The Wall On The Considered Section Of Moss, Algae And Lichen With Wire Brushes; Chemical (Disinfection) Using A Specialist;  Removal Of Graffiti Paint From Brick Faces Using The Preparation For Removing Graffiti From The Historic Surfaces;  Supplementing Welds With Lime -Cement Mortar With The Addition Of Sealing Agent Or Ready Sealing Mortar;  Scanned Plaster And Applying Renovation Plaster On A Secondary Brick Wall - See 3);  Strengthening Heavily Disintegrated Bricks And Mortars Using Silica Preparation And Color Consolidation/Unification Of Supplementation Laser Using Paints That Do Not Form Coatings For Mineral Materials;  Execution Of Hydrophobisation Of The Surfaces Of Bricks And Mortars Using Colorless Solvent Impregnation; Debris And Waste;  Ordering The Area. The Number Of Works Attached To The Tender Should Be Treated As Auxiliary Materials. The Offer Includes All Robots Included In The Project Documentation, Which Is An Attachment To The Tender And The Works Described Additionally In The Description Of The Subject Of The Contract. The Contracting Authority Has Made Every Effort To Ensure That The Description Of The Subject Of The Contract Was Consistent With The Act. In The Case Of Determining The Name, Brand, Etc. In The Design Documentation, It Should Be Treated As Examples, And The Employer Allows Equivalent Solutions, The Contracting Authority Does Not Provide For The Division Of The Order Into Parts And Does Not Allow Partial Offers. Reasons Of Failure To Divide: This Order Is All The Works Intended For Implementation In The Current Budget Year. In The Contracting Authoritys Opinion, The Order Is Suitable For Small And Medium -Sized Enterprises, And Dividing The Order Into Parts Would Threaten Excessive Technical Difficulties And Increased Costs Of Investment And The Need To Coordinate The Activities Of Various Contractors Implement