Request For Quotation Motor Oils, Transformer

Motor Oil 15W-40 For Gasoline Engines, Turbo-Diesel Oil 10W-40 Apicf-4/Sg, Motor Oil For M-10Dm Auto-Tractor Diesel Engines, Designed For The Summer Operation Of Highly Phoned Diesel Engines With Turbocharging Main Tractors, Timber Trucks, Heavy-Loading Dump Trucks, Industrial Tractors Of Domestic And Imported Production, Working In Difficult Conditions. It Can Be Used In Diesel Engines Without Boost With A Significantly Increased Mileage Between Oil Replacements. It Is Made On The Basis Of Mineral Basic Oils With The Addition Of An Effective Composition Of Additives. Norma Norma Norma Kinematic Viscosity At 1000C, Mm2/C 15.4 Valid Index 93 Outbreak Temperature In Open Tiger, 0C 246 Fall Temperature, 0C -21 Alkaline Number, Mg/G 9.0 Vehility Sulfate, % 1.3 Density, At 20 0 ° C, G/Cm3 0.897 Tara 5 Liters, T-1500U Oil (Tu 38.401-58-107-97) Is Produced From Sulfuric Paraffin Oils Using Selective Cleaning And Hydrogenation Processes. Contains The Add -On Ionol. It Has Improved Stability Against Oxidation, Has A Low Content Of Sulfur Compounds, The Low Value Of The Tangent Of The Angle Of Dielectric Losses. Recommended For Use In Electrical Equipment With A Voltage Of Up To 500 Kv And Above. Transformer Oils Are Used To Pour Power And Measuring Transformers, Reactor Equipment, As Well As Oil Switches D Of The Latest Oil Devices Perform The Functions Of The Ii-Standard Arcaming Environment. Electro Insulating Properties Of Oil Are Determined Mainly By The Tangent Of The Angle Of Dielectric Losses. The Dielectric Strength Of Transformer Oils Is Mainly Determined By The Presence Of Fibers And Water, So Mechanical Impurities And Water In The Oils Should Be Completely Absent. The Low Temperature Of The Oil Hardening (-45 ° C And Below) Is Necessary To Maintain Their Mobility At Low Temperatures. To Ensure Effective Heat Removal, Transformer Oils Must Have The Smallest Viscosity At A Flash Temperature Of At Least 95, 125, 135 And 150 ° C For Different Brands. Показатели Т-1500У Кинематическая Вязкость, Мм2/С, При Температуре 40 °С: - 11, Кинематическая Вязкость, Мм2/С, При Температуре - 30 °С: - 1300, Кислотное Число, Мг Кон/Г, Не Более: 0,01, Температура, °С Вспышки В Закрытом Тигле, Не Ниже: - 135, Температура, °С Застывания, Не Выше: -45, Серы, % (Mas. Doel): 0.3, Stability, Indicators After Oxidation, No More: - Volatile Low Molecular Weight Acids Of The Mg/G) - 0.05; -Acid Number, Mg Con/G -0.2; Transparency At 20 ° C: Tangent Of The Angle Of Dielectric Losses At 90 ° C, %, Not More Than 0.5 Color, Units. Tsnt, No More Than -1.5, Corrosion On A Copper Plate -Withstands, Density At 20 ° C, Kg/M3, No More Than 885, Conditions Of Oxidation In Determining Stability According To The Method Of Gost 981-75: Temperature, ° C -135, Duration -30 Oxygen Consumption, Ml/Min -50, Special Motor Oil For Chinese Car Cf-4 Equipment, Sai 15W-40 Ari Gost 17479.1-2015 Technical Characteristic For The Engine Oil Special For Chinese Car Cf-4 Technology, Sai 15W-40 Ari Use In Highly Forced Heavily Loaded Diesel Engines, With A Turbo Shift On Trucks, Mains Buses, Construction And Agricultural Machinery, Where The Lubricants Of The Operating Class Of The Api Cf-4 (Or Earlier Specifications) And The Corresponding Viscosity Class Are Recommended. Physico - Chemical Properties Typical Characteristics Of Prc 15W -40 Density At 20 ° C, G/Cm3 - 0.8801 Valid Index - 142 Kinematic Viscosity At 100 ° C, Mm2/S - 14.35 Alkaline Number, Mg Koh/G - 10.54 Sulfate Ash, % Evaporation, % - 11.4 Outbreak Temperature In Open Opening Tiger, ° C - 230 The Temperature Of The Solidification, ° C - Minus 34. For Issues, Contact By Phone 87762411975 - Acting The Chief Mechanic Of Maksat.