Bids Are Invited For Price Registration For Hiring A Company Specializing In The Supply Of School Furniture To Meet The Needs Of The School Units Of The Municipal Education Network And The Municipal Education Secretariat Of The Municipality Of Mirador - Ma.

Set Individual Student Fde Size 03 Cja -03 - Mdf -Top Table And Polypropylene Book Holder, Mounted On Steel Tubular Structure With Gray Crystal Epoxy Paint And Polypropylene Shoes Minimal Height Measurements 594 Mm X Wide 600Mm X Depth 450 Mm. - Puffed Chair With Injected Polypropylene Seat And Backrest On Epoxy Steel Tubular Structure And Polypropylene Tip. Minimum Measurements Height 625 Mm X Width 396Mm X Depth 310 Mm; Height To 350Mm Accent., Individual Student Set Fde Size 06 Cja -06 -Mdf Top And Polypropylene Book Holder, Mounted On Steel Tubular Structure With Gray Crystal Epoxy Paint And Polypropylene Shoes Minimal Height Measurements 760 Mm X Width 600Mm X Depth 450 Mm. -Weked With Injected Polypropylene Seat And Backrest, Mounted On Steel Tubular Structure With Epoxy Paint And Polypropylene Tip. Minimum Height 720 Mm X Width 400Mm X Depth 430 Mm; Height To 460Mm Accent., Fde Es -10 Wooden Bin Shelf Composed Of: Side, Lower Parts, Shelf And Mdp Partitions, 18Mm Thickness, Coated On Both Low Pressure Melamine Laminate Sides - Bp, Gray Textured Finish (See References). Dimensions Finished According To Project; Mdp Posterior Part, 15Mm Thickness, Coated On Both Low Pressure Melamine Laminate Sides - Bp, Textured Finish. Dimensions Finished According To Project; Mdp Top, 18Mm Thickness. Upper Face Coated In High -Range -Made High Pressure Melamine Laminate 0, 6Mm Thick, With 10Mm Curvature Radius, Textured Finish. Low -Pressure Laminated Lower -Lumped Lower Face - Bp, Textured Finish. Headed Edges With Pvc (Polyvinyl Chloride) On -Board Tape With Primer, Glued With Hot Melting Sticker. Nominal Dimensions Of 22Mm (Width) X 3Mm (Thickness), For Parts Exposed To Contact With The User. Nominal Dimensions Of 22Mm (Width) X 0, 45Mm (Thickness), For Parts Where There Will Be No 4Th Contact With The User. Base Of Carbon Steel Tube, Cold Laminate, Sewing, 20Mm X 40Mm Rectangular Section, In 16 (1, 52Mm), Welded And Perforated. Pipe Meetings Should Receive Welding Throughout The Perimeter Of The Union. The Surface Of The Base That Is In Contact With The Furniture Should Be Planned After The Weld Application. Finish In Epoxy/ Polyester Hybrid Powder Paint, Electrostatic, Shiny, Polymerized Greenhouse, Minimum Thickness Of 40 Micrometers. Metal Leveling Shoes, Based On Injected Polypropylene, 3/8 Thread. Steel Plate Fixation (Thick 1, 5Mm) With Aluminum Rivet. Fixations: Fixing The Parts That Make Up The Cabinet Body With Definitive Connection Devices, Consisting Of Locking System And Screw With Wooden Thread. Fixing The Shelf With Shelf Support In Zamac. Fixing The Metal Base To Body D, Set For Refectory Fde - Mbr -03 (Blue) Set For Refectory Composed Of 1 (One) Table And 2 (Two) Stackable Seats. Table With Crowded Wood Top, Coated With Melamine Laminate, Mounted On Tubular Structure. Banks With Crowded Wooden Seats, Coated In Melamine Laminate, Mounted On Tubular Structure. Top And Seats In Agglomerated Wood (Mdp), With A Thickness Of 25Mm, Coated On The Upper Face In Alt Melamine Laminate