Bids Are Invited For Acquisition Of Press Overdriving Hydraulic Vertical Hydraulic To Meet The Demands Of The Screening And Solid Sorting Center And Solid Waste Of The Municipality Of São Bonifácio/Sc

Hydraulic Vertical Float Press For Paper, Cardboard, Plastic, Pet And Metals, With The Following Technical Specifications:- Machine With Minimum Dimensions Of 2800Mm (Height) X 950Mm (Length) X 750Mm (Width)- Pressing Box And Size Of Bales With Minimum Dimensions Of 800Mm (Height) X 830Mm X 600Mm (Width); Weight Of Bales From 100 To 250 Kg- Minimum Nominal Hydraulic Power Of 15 Tons- Mechanical Retention System; - “Mouth/Funnel” Of At Least 500Mm X 830Mm- Three-Phase Engine Of At Least 7, 5 Hp, With Voltage Of 220 Volts; - 1020 Or Higher Steel Plate Structure In The Minimum Thickness Of 3/16; - Electrostatic Painting; - Engine Activation In Direct Starting- Hoses And Connections Sized To Acquit Minimum Working Pressure Of 120 Bar; System Removal From Semi-Automatic Burden Via Wire Rope; Minimum Productivity Of 4 Bales/Hour; Safety Latch System, Avoiding Involuntary Opening; Devices/Emergency Button With Monitoring System; Control Panel With Fault Detection Of Its Components; Control Panel And Protection Of Electrical Components. Emergency Stopping On The Front Of The Panel And The Bi Manual Command. Auxiliary Safety Port, Rear Door, Front And Supply Door, Provided With Safety Sensor For Pressing The Press Drive, Preventing The Operation If Any Door Is Open; Operational Security Systems Installed In Accordance With The Current Abnt Nbr Standards And Regulatory Standards, Such As Nr-12, Nr-10 And Abnt Nbr 14152. The Equipment Should Be Delivered With A Removal Car Compatible With The Equipment. The Equipment Should Be Delivered With Hydraulic Oil And Other Accessories Necessary For Its Full Operation After Installed. New Equipment With Assurance Of The Manufacturer Of At Least 12 Months After Installation, Without Limit Of Hours Worked.